317 lines
10 KiB
C
317 lines
10 KiB
C
/*
|
|
* Copyright (c) 1994 Peter Galbavy. All rights reserved.
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Peter Galbavy.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $Id: espvar.h,v 1.2 1994/10/02 22:00:22 deraadt Exp $
|
|
*/
|
|
|
|
#define ESP_SYNC_REQ_ACK_OFS 0
|
|
|
|
#define ESP_DEBUG 0
|
|
|
|
#define FREQTOCCF(freq) (((freq + 4) / 5))
|
|
#define ESP_DEF_TIMEOUT 153
|
|
|
|
/* esp revisions */
|
|
#define ESP100 0x01
|
|
#define ESP100A 0x02
|
|
#define ESP200 0x03
|
|
|
|
/* Grabbed from Julians SCSI aha-drivers */
|
|
#ifdef DDB
|
|
int Debugger();
|
|
#else DDB
|
|
#define Debugger() panic("should call debugger here (esp.c)")
|
|
#endif DDB
|
|
|
|
typedef caddr_t physaddr;
|
|
|
|
struct esp_dma_seg {
|
|
physaddr addr;
|
|
long len;
|
|
};
|
|
|
|
extern int delaycount;
|
|
#define FUDGE(X) ((X)>>1) /* get 1 ms spincount */
|
|
#define MINIFUDGE(X) ((X)>>4) /* get (approx) 125us spincount */
|
|
#define NUM_CONCURRENT 7 /* Only one per target for now */
|
|
|
|
/*
|
|
* ECB. Holds additional information for each SCSI command Comments: We
|
|
* need a separate scsi command block because we may need to overwrite it
|
|
* with a request sense command. Basicly, we refrain from fiddling with
|
|
* the scsi_xfer struct (except do the expected updating of return values).
|
|
* We'll generally update: xs->{flags,resid,error,sense,status} and
|
|
* occasionally xs->retries.
|
|
*/
|
|
struct ecb {
|
|
TAILQ_ENTRY(ecb) chain;
|
|
struct scsi_xfer *xs; /* SCSI xfer ctrl block from above */
|
|
int flags; /* Status */
|
|
#define ECB_FREE 0x00
|
|
#define ECB_ACTIVE 0x01
|
|
#define ECB_DONE 0x04
|
|
#define ECB_CHKSENSE 0x08
|
|
struct scsi_generic cmd; /* SCSI command block */
|
|
int clen;
|
|
char *daddr; /* Saved data pointer */
|
|
int dleft; /* Residue */
|
|
int stat; /* SCSI status byte */
|
|
};
|
|
|
|
/*
|
|
* Some info about each (possible) target on the SCSI bus. This should
|
|
* probably have been a "per target+lunit" structure, but we'll leave it at
|
|
* this for now. Is there a way to reliably hook it up to sc->fordriver??
|
|
*/
|
|
struct esp_tinfo {
|
|
int cmds; /* #commands processed */
|
|
int dconns; /* #disconnects */
|
|
int touts; /* #timeouts */
|
|
int perrs; /* #parity errors */
|
|
int senses; /* #request sense commands sent */
|
|
ushort lubusy; /* What local units/subr. are busy? */
|
|
u_char flags;
|
|
#define NEED_TO_RESET 0x01 /* Should send a BUS_DEV_RESET */
|
|
#define DO_NEGOTIATE 0x02 /* (Re)Negotiate synchronous options */
|
|
#define TARGET_BUSY 0x04 /* Target is busy, i.e. cmd in progress */
|
|
u_char period; /* Period suggestion */
|
|
u_char offset; /* Offset suggestion */
|
|
} tinfo_t;
|
|
|
|
/* Register a linenumber (for debugging) */
|
|
#define LOGLINE(p)
|
|
|
|
#define ESP_SHOWECBS 0x01
|
|
#define ESP_SHOWINTS 0x02
|
|
#define ESP_SHOWCMDS 0x04
|
|
#define ESP_SHOWMISC 0x08
|
|
#define ESP_SHOWTRAC 0x10
|
|
#define ESP_SHOWSTART 0x20
|
|
#define ESP_SHOWPHASE 0x40
|
|
|
|
#if ESP_DEBUG
|
|
#define ESP_ECBS(str) do {if (esp_debug & ESP_SHOWECBS) printf str;} while (0)
|
|
#define ESP_MISC(str) do {if (esp_debug & ESP_SHOWMISC) printf str;} while (0)
|
|
#define ESP_INTS(str) do {if (esp_debug & ESP_SHOWINTS) printf str;} while (0)
|
|
#define ESP_TRACE(str) do {if (esp_debug & ESP_SHOWTRAC) printf str;} while (0)
|
|
#define ESP_CMDS(str) do {if (esp_debug & ESP_SHOWCMDS) printf str;} while (0)
|
|
#define ESP_START(str) do {if (esp_debug & ESP_SHOWSTART) printf str;}while (0)
|
|
#define ESP_PHASE(str) do {if (esp_debug & ESP_SHOWPHASE) printf str;}while (0)
|
|
#else
|
|
#define ESP_ECBS(str)
|
|
#define ESP_MISC(str)
|
|
#define ESP_INTS(str)
|
|
#define ESP_TRACE(str)
|
|
#define ESP_CMDS(str)
|
|
#define ESP_START(str)
|
|
#define ESP_PHASE(str)
|
|
#endif
|
|
|
|
#define ESP_MAX_MSG_LEN 8
|
|
|
|
struct esp_softc {
|
|
struct device sc_dev; /* us as a device */
|
|
struct sbusdev sc_sd; /* sbus device */
|
|
struct intrhand sc_ih; /* intr handler */
|
|
struct evcnt sc_intrcnt; /* intr count */
|
|
struct scsi_link sc_link; /* scsi lint struct */
|
|
volatile caddr_t sc_reg; /* the registers */
|
|
struct dma_softc *sc_dma; /* pointer to my dma */
|
|
|
|
/* register defaults */
|
|
u_char sc_cfg1; /* Config 1 */
|
|
u_char sc_cfg2; /* Config 2, not ESP100 */
|
|
u_char sc_cfg3; /* Config 3, only ESP200 */
|
|
u_char sc_ccf; /* Clock Conversion */
|
|
u_char sc_timeout;
|
|
|
|
/* register copies, see espreadregs() */
|
|
u_char sc_espintr;
|
|
u_char sc_espstat;
|
|
u_char sc_espstep;
|
|
u_char sc_espfflags;
|
|
|
|
/* the current boot path component */
|
|
struct bootpath *sc_bp;
|
|
|
|
/* Lists of command blocks */
|
|
TAILQ_HEAD(ecb_list, ecb) free_list,
|
|
ready_list,
|
|
nexus_list;
|
|
|
|
struct ecb *sc_nexus; /* current command */
|
|
struct ecb sc_ecb[8]; /* one per target */
|
|
struct esp_tinfo sc_tinfo[8];
|
|
|
|
/* Data about the current nexus (updated for every cmd switch) */
|
|
caddr_t sc_dp; /* Current data pointer */
|
|
size_t sc_dleft; /* Data left to transfer */
|
|
|
|
/* Adapter state */
|
|
int sc_phase; /* Copy of what bus phase we are in */
|
|
int sc_prevphase; /* Copy of what bus phase we were in */
|
|
u_char sc_state; /* State applicable to the adapter */
|
|
u_char sc_flags;
|
|
u_char sc_selid;
|
|
|
|
/* Message stuff */
|
|
char sc_msgpriq; /* One or more messages to send (encoded) */
|
|
char sc_msgout; /* What message is on its way out? */
|
|
char sc_omess[ESP_MAX_MSG_LEN];
|
|
caddr_t sc_omp; /* Message pointer (for multibyte messages) */
|
|
size_t sc_omlen;
|
|
char sc_imess[ESP_MAX_MSG_LEN + 1];
|
|
caddr_t sc_imp; /* Message pointer (for multibyte messages) */
|
|
size_t sc_imlen;
|
|
|
|
/* hardware/openprom stuff */
|
|
int sc_node; /* PROM node ID */
|
|
int sc_freq; /* Freq in HZ */
|
|
int sc_pri; /* SBUS priority */
|
|
int sc_id; /* our scsi id */
|
|
int sc_rev; /* esp revision */
|
|
int sc_minsync; /* minimum sync period / 4 */
|
|
};
|
|
|
|
/* values for sc_state */
|
|
#define ESP_IDLE 0x01 /* waiting for something to do */
|
|
#define ESP_TMP_UNAVAIL 0x02 /* Don't accept SCSI commands */
|
|
#define ESP_SELECTING 0x03 /* SCSI command is arbiting */
|
|
#define ESP_RESELECTED 0x04 /* Has been reselected */
|
|
#define ESP_HASNEXUS 0x05 /* Actively using the SCSI bus */
|
|
#define ESP_CLEANING 0x06
|
|
|
|
/* values for sc_flags */
|
|
#define ESP_DROP_MSGI 0x01 /* Discard all msgs (parity err detected) */
|
|
#define ESP_DOINGDMA 0x02 /* The FIFO data path is active! */
|
|
#define ESP_BUSFREE_OK 0x04 /* Bus free phase is OK. */
|
|
#define ESP_SYNCHNEGO 0x08 /* Synch negotiation in progress. */
|
|
#define ESP_BLOCKED 0x10 /* Don't schedule new scsi bus operations */
|
|
|
|
/* values for sc_msgout */
|
|
#define SEND_DEV_RESET 0x01
|
|
#define SEND_PARITY_ERROR 0x02
|
|
#define SEND_ABORT 0x04
|
|
#define SEND_REJECT 0x08
|
|
#define SEND_INIT_DET_ERR 0x10
|
|
#define SEND_IDENTIFY 0x20
|
|
#define SEND_SDTR 0x40
|
|
|
|
/*
|
|
* Generic SCSI messages. For now we reject most of them.
|
|
*/
|
|
/* Messages (1 byte) */ /* I/T M(andatory) or (O)ptional */
|
|
#define MSG_CMDCOMPLETE 0x00 /* M/M */
|
|
#define MSG_EXTENDED 0x01 /* O/O */
|
|
#define MSG_SAVEDATAPOINTER 0x02 /* O/O */
|
|
#define MSG_RESTOREPOINTERS 0x03 /* O/O */
|
|
#define MSG_DISCONNECT 0x04 /* O/O */
|
|
#define MSG_INITIATOR_DET_ERR 0x05 /* M/M */
|
|
#define MSG_ABORT 0x06 /* O/M */
|
|
#define MSG_MESSAGE_REJECT 0x07 /* M/M */
|
|
#define MSG_NOOP 0x08 /* M/M */
|
|
#define MSG_PARITY_ERR 0x09 /* M/M */
|
|
#define MSG_LINK_CMD_COMPLETE 0x0a /* O/O */
|
|
#define MSG_LINK_CMD_COMPLETEF 0x0b /* O/O */
|
|
#define MSG_BUS_DEV_RESET 0x0c /* O/M */
|
|
#define MSG_ABORT_TAG 0x0d /* O/O */
|
|
#define MSG_CLEAR_QUEUE 0x0e /* O/O */
|
|
#define MSG_INIT_RECOVERY 0x0f /* O/O */
|
|
#define MSG_REL_RECOVERY 0x10 /* O/O */
|
|
#define MSG_TERM_IO_PROC 0x11 /* O/O */
|
|
|
|
/* Messages (2 byte) */
|
|
#define MSG_SIMPLE_Q_TAG 0x20 /* O/O */
|
|
#define MSG_HEAD_OF_Q_TAG 0x21 /* O/O */
|
|
#define MSG_ORDERED_Q_TAG 0x22 /* O/O */
|
|
#define MSG_IGN_WIDE_RESIDUE 0x23 /* O/O */
|
|
|
|
/* Identify message */
|
|
#define ESP_MSG_IDENTIFY(lun) (0x80|(lun & 0x7)) /* XXX 0xc0=selection on */
|
|
#define ESP_MSG_ISIDENT(m) ((m) & 0x80)
|
|
|
|
/* Extended messages (opcode) */
|
|
#define MSG_EXT_SDTR 0x01
|
|
|
|
/* SCSI Status codes */
|
|
#define ST_GOOD 0x00
|
|
#define ST_CHKCOND 0x02
|
|
#define ST_CONDMET 0x04
|
|
#define ST_BUSY 0x08
|
|
#define ST_INTERMED 0x10
|
|
#define ST_INTERMED_CONDMET 0x14
|
|
#define ST_RESERVATION_CONFLICT 0x18
|
|
#define ST_CMD_TERM 0x22
|
|
#define ST_QUEUE_FULL 0x28
|
|
|
|
#define ST_MASK 0x3e /* bit 0,6,7 is reserved */
|
|
|
|
/* phase bits */
|
|
#define IOI 0x01
|
|
#define CDI 0x02
|
|
#define MSGI 0x04
|
|
|
|
/* Information transfer phases */
|
|
#define DATA_OUT_PHASE (0)
|
|
#define DATA_IN_PHASE (IOI)
|
|
#define COMMAND_PHASE (CDI)
|
|
#define STATUS_PHASE (CDI|IOI)
|
|
#define MESSAGE_OUT_PHASE (MSGI|CDI)
|
|
#define MESSAGE_IN_PHASE (MSGI|CDI|IOI)
|
|
|
|
#define PHASE_MASK (MSGI|CDI|IOI)
|
|
|
|
/* Some pseudo phases for getphase()*/
|
|
#define BUSFREE_PHASE 0x100 /* Re/Selection no longer valid */
|
|
#define INVALID_PHASE 0x101 /* Re/Selection valid, but no REQ yet */
|
|
#define PSEUDO_PHASE 0x100 /* "pseudo" bit */
|
|
|
|
#if ESP_DEBUG > 1
|
|
#define ESPCMD(sc, cmd) printf("cmd:0x%02x ", sc->sc_reg[ESP_CMD] = cmd)
|
|
#else
|
|
#define ESPCMD(sc, cmd) sc->sc_reg[ESP_CMD] = cmd
|
|
#endif
|
|
|
|
#define SAME_ESP(sc, bp, ca) \
|
|
((bp->val[0] == ca->ca_slot && bp->val[1] == ca->ca_offset) || \
|
|
(bp->val[0] == -1 && bp->val[1] == sc->sc_dev.dv_unit))
|
|
|
|
#define TARGETNAME(ecb) \
|
|
((struct device *)ecb->xs->sc_link->adapter_softc)->dv_xname
|
|
|
|
/* DMA macros for ESP */
|
|
#define DMA_ENINTR(r) ((r->enintr)(r))
|
|
#define DMA_ISINTR(r) ((r->isintr)(r))
|
|
#define DMA_RESET(r) ((r->reset)(r))
|
|
#define DMA_START(a, b, c, d) ((a->start)(a, b, c, d))
|
|
#define DMA_INTR(r) ((r->intr)(r))
|
|
|
|
#define DMA_DRAIN(sc) if (sc->sc_rev < DMAREV_2) { \
|
|
DMACSR(sc) |= D_DRAIN; \
|
|
DMAWAIT1(sc); \
|
|
}
|