912 lines
23 KiB
C
912 lines
23 KiB
C
/*
|
|
* Copyright (c) 1990 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Van Jacobson of Lawrence Berkeley Laboratory.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: @(#)sd.c 7.8 (Berkeley) 6/9/91
|
|
* $Id: sd.c,v 1.2 1993/05/22 07:56:53 cgd Exp $
|
|
*/
|
|
|
|
/*
|
|
* SCSI CCS (Command Command Set) disk driver.
|
|
*/
|
|
#include "sd.h"
|
|
#if NSD > 0
|
|
|
|
#include "sys/param.h"
|
|
#include "sys/systm.h"
|
|
#include "sys/buf.h"
|
|
#include "sys/dkstat.h"
|
|
#include "sys/disklabel.h"
|
|
#include "sys/malloc.h"
|
|
#include "sys/proc.h"
|
|
|
|
#include "device.h"
|
|
#include "scsireg.h"
|
|
#include "vm/vm_param.h"
|
|
#include "vm/lock.h"
|
|
#include "vm/vm_statistics.h"
|
|
#include "vm/pmap.h"
|
|
#include "vm/vm_prot.h"
|
|
|
|
extern int scsi_test_unit_rdy();
|
|
extern int scsi_request_sense();
|
|
extern int scsi_inquiry();
|
|
extern int scsi_read_capacity();
|
|
extern int scsi_tt_write();
|
|
extern int scsireq();
|
|
extern int scsiustart();
|
|
extern int scsigo();
|
|
extern void scsifree();
|
|
extern void scsireset();
|
|
extern void scsi_delay();
|
|
|
|
extern void disksort();
|
|
extern void biodone();
|
|
extern int physio();
|
|
extern void TBIS();
|
|
|
|
int sdinit();
|
|
void sdstrategy(), sdstart(), sdustart(), sdgo(), sdintr();
|
|
|
|
struct driver sddriver = {
|
|
sdinit, "sd", (int (*)())sdstart, (int (*)())sdgo, (int (*)())sdintr,
|
|
};
|
|
|
|
struct size {
|
|
u_long strtblk;
|
|
u_long endblk;
|
|
int nblocks;
|
|
};
|
|
|
|
struct sdinfo {
|
|
struct size part[8];
|
|
};
|
|
|
|
/*
|
|
* since the SCSI standard tends to hide the disk structure, we define
|
|
* partitions in terms of DEV_BSIZE blocks. The default partition table
|
|
* (for an unlabeled disk) reserves 512K for a boot area, has an 8 meg
|
|
* root and 32 meg of swap. The rest of the space on the drive goes in
|
|
* the G partition. As usual, the C partition covers the entire disk
|
|
* (including the boot area).
|
|
*/
|
|
struct sdinfo sddefaultpart = {
|
|
1024, 17408, 16384 , /* A */
|
|
17408, 82944, 65536 , /* B */
|
|
0, 0, 0 , /* C */
|
|
17408, 115712, 98304 , /* D */
|
|
115712, 218112, 102400 , /* E */
|
|
218112, 0, 0 , /* F */
|
|
82944, 0, 0 , /* G */
|
|
115712, 0, 0 , /* H */
|
|
};
|
|
|
|
struct sd_softc {
|
|
struct hp_device *sc_hd;
|
|
struct devqueue sc_dq;
|
|
int sc_format_pid; /* process using "format" mode */
|
|
short sc_flags;
|
|
short sc_type; /* drive type */
|
|
short sc_punit; /* physical unit (scsi lun) */
|
|
u_short sc_bshift; /* convert device blocks to DEV_BSIZE blks */
|
|
u_int sc_blks; /* number of blocks on device */
|
|
int sc_blksize; /* device block size in bytes */
|
|
u_int sc_wpms; /* average xfer rate in 16 bit wds/sec. */
|
|
struct sdinfo sc_info; /* drive partition table & label info */
|
|
} sd_softc[NSD];
|
|
|
|
/* sc_flags values */
|
|
#define SDF_ALIVE 0x1
|
|
|
|
#ifdef DEBUG
|
|
int sddebug = 1;
|
|
#define SDB_ERROR 0x01
|
|
#define SDB_PARTIAL 0x02
|
|
#endif
|
|
|
|
struct sdstats {
|
|
long sdresets;
|
|
long sdtransfers;
|
|
long sdpartials;
|
|
} sdstats[NSD];
|
|
|
|
struct buf sdtab[NSD];
|
|
struct scsi_fmt_cdb sdcmd[NSD];
|
|
struct scsi_fmt_sense sdsense[NSD];
|
|
|
|
static struct scsi_fmt_cdb sd_read_cmd = { 10, CMD_READ_EXT };
|
|
static struct scsi_fmt_cdb sd_write_cmd = { 10, CMD_WRITE_EXT };
|
|
|
|
#define sdunit(x) (minor(x) >> 3)
|
|
#define sdpart(x) (minor(x) & 0x7)
|
|
#define sdpunit(x) ((x) & 7)
|
|
#define b_cylin b_resid
|
|
|
|
#define SDRETRY 2
|
|
|
|
/*
|
|
* Table of scsi commands users are allowed to access via "format"
|
|
* mode. 0 means not legal. 1 means "immediate" (doesn't need dma).
|
|
* -1 means needs dma and/or wait for intr.
|
|
*/
|
|
static char legal_cmds[256] = {
|
|
/***** 0 1 2 3 4 5 6 7 8 9 A B C D E F */
|
|
/*00*/ 0, 0, 0, 0, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*10*/ 0, 0, 1, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
|
|
/*20*/ 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*30*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*40*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*50*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*60*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*70*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*80*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*90*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*a0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*b0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*c0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*d0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*e0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
/*f0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
};
|
|
|
|
static struct scsi_inquiry inqbuf;
|
|
static struct scsi_fmt_cdb inq = {
|
|
6,
|
|
CMD_INQUIRY, 0, 0, 0, sizeof(inqbuf), 0
|
|
};
|
|
|
|
static u_char capbuf[8];
|
|
struct scsi_fmt_cdb cap = {
|
|
10,
|
|
CMD_READ_CAPACITY, 0, 0, 0, 0, 0, 0, 0, 0, 0
|
|
};
|
|
|
|
static int
|
|
sdident(sc, hd)
|
|
struct sd_softc *sc;
|
|
struct hp_device *hd;
|
|
{
|
|
int unit;
|
|
register int ctlr, slave;
|
|
register int i;
|
|
register int tries = 10;
|
|
char idstr[32];
|
|
int ismo = 0;
|
|
|
|
ctlr = hd->hp_ctlr;
|
|
slave = hd->hp_slave;
|
|
unit = sc->sc_punit;
|
|
scsi_delay(-1);
|
|
|
|
/*
|
|
* See if unit exists and is a disk then read block size & nblocks.
|
|
*/
|
|
while ((i = scsi_test_unit_rdy(ctlr, slave, unit)) != 0) {
|
|
if (i == -1 || --tries < 0) {
|
|
if (ismo)
|
|
break;
|
|
/* doesn't exist or not a CCS device */
|
|
goto failed;
|
|
}
|
|
if (i == STS_CHECKCOND) {
|
|
u_char sensebuf[128];
|
|
struct scsi_xsense *sp = (struct scsi_xsense *)sensebuf;
|
|
|
|
scsi_request_sense(ctlr, slave, unit, sensebuf,
|
|
sizeof(sensebuf));
|
|
if (sp->class == 7)
|
|
switch (sp->key) {
|
|
/* not ready -- might be MO with no media */
|
|
case 2:
|
|
if (sp->len == 12 &&
|
|
sensebuf[12] == 10) /* XXX */
|
|
ismo = 1;
|
|
break;
|
|
/* drive doing an RTZ -- give it a while */
|
|
case 6:
|
|
DELAY(1000000);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
DELAY(1000);
|
|
}
|
|
/*
|
|
* Find out about device
|
|
*/
|
|
if (scsi_immed_command(ctlr, slave, unit, &inq,
|
|
(u_char *)&inqbuf, sizeof(inqbuf), B_READ))
|
|
goto failed;
|
|
switch (inqbuf.type) {
|
|
case 0: /* disk */
|
|
case 4: /* WORM */
|
|
case 5: /* CD-ROM */
|
|
case 7: /* Magneto-optical */
|
|
break;
|
|
default: /* not a disk */
|
|
goto failed;
|
|
}
|
|
/*
|
|
* Get a usable id string
|
|
*/
|
|
if (inqbuf.version != 1) {
|
|
bcopy("UNKNOWN", &idstr[0], 8);
|
|
bcopy("DRIVE TYPE", &idstr[8], 11);
|
|
} else {
|
|
bcopy((caddr_t)&inqbuf.vendor_id, (caddr_t)idstr, 28);
|
|
for (i = 27; i > 23; --i)
|
|
if (idstr[i] != ' ')
|
|
break;
|
|
idstr[i+1] = 0;
|
|
for (i = 23; i > 7; --i)
|
|
if (idstr[i] != ' ')
|
|
break;
|
|
idstr[i+1] = 0;
|
|
for (i = 7; i >= 0; --i)
|
|
if (idstr[i] != ' ')
|
|
break;
|
|
idstr[i+1] = 0;
|
|
}
|
|
i = scsi_immed_command(ctlr, slave, unit, &cap,
|
|
(u_char *)&capbuf, sizeof(capbuf), B_READ);
|
|
if (i) {
|
|
if (i != STS_CHECKCOND ||
|
|
bcmp(&idstr[0], "HP", 3) ||
|
|
bcmp(&idstr[8], "S6300.650A", 11))
|
|
goto failed;
|
|
/* XXX unformatted or non-existant MO media; fake it */
|
|
sc->sc_blks = 318664;
|
|
sc->sc_blksize = 1024;
|
|
} else {
|
|
sc->sc_blks = *(u_int *)&capbuf[0];
|
|
sc->sc_blksize = *(int *)&capbuf[4];
|
|
}
|
|
/* return value of read capacity is last valid block number */
|
|
sc->sc_blks++;
|
|
|
|
if (inqbuf.version != 1)
|
|
printf("sd%d: type 0x%x, qual 0x%x, ver %d", hd->hp_unit,
|
|
inqbuf.type, inqbuf.qual, inqbuf.version);
|
|
else
|
|
printf("sd%d: %s %s rev %s", hd->hp_unit, idstr, &idstr[8],
|
|
&idstr[24]);
|
|
printf(", %d %d byte blocks\n", sc->sc_blks, sc->sc_blksize);
|
|
if (sc->sc_blksize != DEV_BSIZE) {
|
|
if (sc->sc_blksize < DEV_BSIZE) {
|
|
printf("sd%d: need %d byte blocks - drive ignored\n",
|
|
unit, DEV_BSIZE);
|
|
goto failed;
|
|
}
|
|
for (i = sc->sc_blksize; i > DEV_BSIZE; i >>= 1)
|
|
++sc->sc_bshift;
|
|
sc->sc_blks <<= sc->sc_bshift;
|
|
}
|
|
sc->sc_wpms = 32 * (60 * DEV_BSIZE / 2); /* XXX */
|
|
scsi_delay(0);
|
|
return(inqbuf.type);
|
|
failed:
|
|
scsi_delay(0);
|
|
return(-1);
|
|
}
|
|
|
|
int
|
|
sdinit(hd)
|
|
register struct hp_device *hd;
|
|
{
|
|
register struct sd_softc *sc = &sd_softc[hd->hp_unit];
|
|
|
|
sc->sc_hd = hd;
|
|
sc->sc_punit = sdpunit(hd->hp_flags);
|
|
sc->sc_type = sdident(sc, hd);
|
|
if (sc->sc_type < 0)
|
|
return(0);
|
|
sc->sc_dq.dq_ctlr = hd->hp_ctlr;
|
|
sc->sc_dq.dq_unit = hd->hp_unit;
|
|
sc->sc_dq.dq_slave = hd->hp_slave;
|
|
sc->sc_dq.dq_driver = &sddriver;
|
|
|
|
/*
|
|
* If we don't have a disk label, build a default partition
|
|
* table with 'standard' size root & swap and everything else
|
|
* in the G partition.
|
|
*/
|
|
sc->sc_info = sddefaultpart;
|
|
/* C gets everything */
|
|
sc->sc_info.part[2].nblocks = sc->sc_blks;
|
|
sc->sc_info.part[2].endblk = sc->sc_blks;
|
|
/* G gets from end of B to end of disk */
|
|
sc->sc_info.part[6].nblocks = sc->sc_blks - sc->sc_info.part[1].endblk;
|
|
sc->sc_info.part[6].endblk = sc->sc_blks;
|
|
/*
|
|
* We also define the D, E and F paritions as an alternative to
|
|
* B and G. D is 48Mb, starts after A and is intended for swapping.
|
|
* E is 50Mb, starts after D and is intended for /usr. F starts
|
|
* after E and is what ever is left.
|
|
*/
|
|
if (sc->sc_blks >= sc->sc_info.part[4].endblk) {
|
|
sc->sc_info.part[5].nblocks =
|
|
sc->sc_blks - sc->sc_info.part[4].endblk;
|
|
sc->sc_info.part[5].endblk = sc->sc_blks;
|
|
} else {
|
|
sc->sc_info.part[5].strtblk = 0;
|
|
sc->sc_info.part[3] = sc->sc_info.part[5];
|
|
sc->sc_info.part[4] = sc->sc_info.part[5];
|
|
}
|
|
/*
|
|
* H is a single partition alternative to E and F.
|
|
*/
|
|
if (sc->sc_blks >= sc->sc_info.part[3].endblk) {
|
|
sc->sc_info.part[7].nblocks =
|
|
sc->sc_blks - sc->sc_info.part[3].endblk;
|
|
sc->sc_info.part[7].endblk = sc->sc_blks;
|
|
} else {
|
|
sc->sc_info.part[7].strtblk = 0;
|
|
}
|
|
|
|
sc->sc_flags = SDF_ALIVE;
|
|
return(1);
|
|
}
|
|
|
|
void
|
|
sdreset(sc, hd)
|
|
register struct sd_softc *sc;
|
|
register struct hp_device *hd;
|
|
{
|
|
sdstats[hd->hp_unit].sdresets++;
|
|
}
|
|
|
|
int
|
|
sdopen(dev, flags, mode, p)
|
|
dev_t dev;
|
|
int flags, mode;
|
|
struct proc *p;
|
|
{
|
|
register int unit = sdunit(dev);
|
|
register struct sd_softc *sc = &sd_softc[unit];
|
|
|
|
if (unit >= NSD)
|
|
return(ENXIO);
|
|
if ((sc->sc_flags & SDF_ALIVE) == 0 && suser(p->p_ucred, &p->p_acflag))
|
|
return(ENXIO);
|
|
|
|
if (sc->sc_hd->hp_dk >= 0)
|
|
dk_wpms[sc->sc_hd->hp_dk] = sc->sc_wpms;
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* This routine is called for partial block transfers and non-aligned
|
|
* transfers (the latter only being possible on devices with a block size
|
|
* larger than DEV_BSIZE). The operation is performed in three steps
|
|
* using a locally allocated buffer:
|
|
* 1. transfer any initial partial block
|
|
* 2. transfer full blocks
|
|
* 3. transfer any final partial block
|
|
*/
|
|
static void
|
|
sdlblkstrat(bp, bsize)
|
|
register struct buf *bp;
|
|
register int bsize;
|
|
{
|
|
register struct buf *cbp = (struct buf *)malloc(sizeof(struct buf),
|
|
M_DEVBUF, M_WAITOK);
|
|
caddr_t cbuf = (caddr_t)malloc(bsize, M_DEVBUF, M_WAITOK);
|
|
register int bn, resid;
|
|
register caddr_t addr;
|
|
|
|
bzero((caddr_t)cbp, sizeof(*cbp));
|
|
cbp->b_proc = curproc; /* XXX */
|
|
cbp->b_dev = bp->b_dev;
|
|
bn = bp->b_blkno;
|
|
resid = bp->b_bcount;
|
|
addr = bp->b_un.b_addr;
|
|
#ifdef DEBUG
|
|
if (sddebug & SDB_PARTIAL)
|
|
printf("sdlblkstrat: bp %x flags %x bn %x resid %x addr %x\n",
|
|
bp, bp->b_flags, bn, resid, addr);
|
|
#endif
|
|
|
|
while (resid > 0) {
|
|
register int boff = dbtob(bn) & (bsize - 1);
|
|
register int count;
|
|
|
|
if (boff || resid < bsize) {
|
|
sdstats[sdunit(bp->b_dev)].sdpartials++;
|
|
count = MIN(resid, bsize - boff);
|
|
cbp->b_flags = B_BUSY | B_PHYS | B_READ;
|
|
cbp->b_blkno = bn - btodb(boff);
|
|
cbp->b_un.b_addr = cbuf;
|
|
cbp->b_bcount = bsize;
|
|
#ifdef DEBUG
|
|
if (sddebug & SDB_PARTIAL)
|
|
printf(" readahead: bn %x cnt %x off %x addr %x\n",
|
|
cbp->b_blkno, count, boff, addr);
|
|
#endif
|
|
sdstrategy(cbp);
|
|
biowait(cbp);
|
|
if (cbp->b_flags & B_ERROR) {
|
|
bp->b_flags |= B_ERROR;
|
|
bp->b_error = cbp->b_error;
|
|
break;
|
|
}
|
|
if (bp->b_flags & B_READ) {
|
|
bcopy(&cbuf[boff], addr, count);
|
|
goto done;
|
|
}
|
|
bcopy(addr, &cbuf[boff], count);
|
|
#ifdef DEBUG
|
|
if (sddebug & SDB_PARTIAL)
|
|
printf(" writeback: bn %x cnt %x off %x addr %x\n",
|
|
cbp->b_blkno, count, boff, addr);
|
|
#endif
|
|
} else {
|
|
count = resid & ~(bsize - 1);
|
|
cbp->b_blkno = bn;
|
|
cbp->b_un.b_addr = addr;
|
|
cbp->b_bcount = count;
|
|
#ifdef DEBUG
|
|
if (sddebug & SDB_PARTIAL)
|
|
printf(" fulltrans: bn %x cnt %x addr %x\n",
|
|
cbp->b_blkno, count, addr);
|
|
#endif
|
|
}
|
|
cbp->b_flags = B_BUSY | B_PHYS | (bp->b_flags & B_READ);
|
|
sdstrategy(cbp);
|
|
biowait(cbp);
|
|
if (cbp->b_flags & B_ERROR) {
|
|
bp->b_flags |= B_ERROR;
|
|
bp->b_error = cbp->b_error;
|
|
break;
|
|
}
|
|
done:
|
|
bn += btodb(count);
|
|
resid -= count;
|
|
addr += count;
|
|
#ifdef DEBUG
|
|
if (sddebug & SDB_PARTIAL)
|
|
printf(" done: bn %x resid %x addr %x\n",
|
|
bn, resid, addr);
|
|
#endif
|
|
}
|
|
free(cbuf, M_DEVBUF);
|
|
free(cbp, M_DEVBUF);
|
|
}
|
|
|
|
void
|
|
sdstrategy(bp)
|
|
register struct buf *bp;
|
|
{
|
|
register int unit = sdunit(bp->b_dev);
|
|
register struct sd_softc *sc = &sd_softc[unit];
|
|
register struct size *pinfo = &sc->sc_info.part[sdpart(bp->b_dev)];
|
|
register struct buf *dp = &sdtab[unit];
|
|
register daddr_t bn;
|
|
register int sz, s;
|
|
|
|
if (sc->sc_format_pid) {
|
|
if (sc->sc_format_pid != curproc->p_pid) { /* XXX */
|
|
bp->b_error = EPERM;
|
|
bp->b_flags |= B_ERROR;
|
|
goto done;
|
|
}
|
|
bp->b_cylin = 0;
|
|
} else {
|
|
bn = bp->b_blkno;
|
|
sz = howmany(bp->b_bcount, DEV_BSIZE);
|
|
if (bn < 0 || bn + sz > pinfo->nblocks) {
|
|
sz = pinfo->nblocks - bn;
|
|
if (sz == 0) {
|
|
bp->b_resid = bp->b_bcount;
|
|
goto done;
|
|
}
|
|
if (sz < 0) {
|
|
bp->b_error = EINVAL;
|
|
bp->b_flags |= B_ERROR;
|
|
goto done;
|
|
}
|
|
bp->b_bcount = dbtob(sz);
|
|
}
|
|
/*
|
|
* Non-aligned or partial-block transfers handled specially.
|
|
*/
|
|
s = sc->sc_blksize - 1;
|
|
if ((dbtob(bn) & s) || (bp->b_bcount & s)) {
|
|
sdlblkstrat(bp, sc->sc_blksize);
|
|
goto done;
|
|
}
|
|
bp->b_cylin = (bn + pinfo->strtblk) >> sc->sc_bshift;
|
|
}
|
|
s = splbio();
|
|
disksort(dp, bp);
|
|
if (dp->b_active == 0) {
|
|
dp->b_active = 1;
|
|
sdustart(unit);
|
|
}
|
|
splx(s);
|
|
return;
|
|
done:
|
|
biodone(bp);
|
|
}
|
|
|
|
void
|
|
sdustart(unit)
|
|
register int unit;
|
|
{
|
|
if (scsireq(&sd_softc[unit].sc_dq))
|
|
sdstart(unit);
|
|
}
|
|
|
|
/*
|
|
* Return:
|
|
* 0 if not really an error
|
|
* <0 if we should do a retry
|
|
* >0 if a fatal error
|
|
*/
|
|
static int
|
|
sderror(unit, sc, hp, stat)
|
|
int unit, stat;
|
|
register struct sd_softc *sc;
|
|
register struct hp_device *hp;
|
|
{
|
|
int cond = 1;
|
|
|
|
sdsense[unit].status = stat;
|
|
if (stat & STS_CHECKCOND) {
|
|
struct scsi_xsense *sp;
|
|
|
|
scsi_request_sense(hp->hp_ctlr, hp->hp_slave,
|
|
sc->sc_punit, sdsense[unit].sense,
|
|
sizeof(sdsense[unit].sense));
|
|
sp = (struct scsi_xsense *)sdsense[unit].sense;
|
|
printf("sd%d: scsi sense class %d, code %d", unit,
|
|
sp->class, sp->code);
|
|
if (sp->class == 7) {
|
|
printf(", key %d", sp->key);
|
|
if (sp->valid)
|
|
printf(", blk %d", *(int *)&sp->info1);
|
|
switch (sp->key) {
|
|
/* no sense, try again */
|
|
case 0:
|
|
cond = -1;
|
|
break;
|
|
/* recovered error, not a problem */
|
|
case 1:
|
|
cond = 0;
|
|
break;
|
|
}
|
|
}
|
|
printf("\n");
|
|
}
|
|
return(cond);
|
|
}
|
|
|
|
static void
|
|
sdfinish(unit, sc, bp)
|
|
int unit;
|
|
register struct sd_softc *sc;
|
|
register struct buf *bp;
|
|
{
|
|
sdtab[unit].b_errcnt = 0;
|
|
sdtab[unit].b_actf = bp->b_actf;
|
|
bp->b_resid = 0;
|
|
biodone(bp);
|
|
scsifree(&sc->sc_dq);
|
|
if (sdtab[unit].b_actf)
|
|
sdustart(unit);
|
|
else
|
|
sdtab[unit].b_active = 0;
|
|
}
|
|
|
|
void
|
|
sdstart(unit)
|
|
register int unit;
|
|
{
|
|
register struct sd_softc *sc = &sd_softc[unit];
|
|
register struct hp_device *hp = sc->sc_hd;
|
|
|
|
/*
|
|
* we have the SCSI bus -- in format mode, we may or may not need dma
|
|
* so check now.
|
|
*/
|
|
if (sc->sc_format_pid && legal_cmds[sdcmd[unit].cdb[0]] > 0) {
|
|
register struct buf *bp = sdtab[unit].b_actf;
|
|
register int sts;
|
|
|
|
sts = scsi_immed_command(hp->hp_ctlr, hp->hp_slave,
|
|
sc->sc_punit, &sdcmd[unit],
|
|
bp->b_un.b_addr, bp->b_bcount,
|
|
bp->b_flags & B_READ);
|
|
sdsense[unit].status = sts;
|
|
if (sts & 0xfe) {
|
|
(void) sderror(unit, sc, hp, sts);
|
|
bp->b_flags |= B_ERROR;
|
|
bp->b_error = EIO;
|
|
}
|
|
sdfinish(unit, sc, bp);
|
|
|
|
} else if (scsiustart(hp->hp_ctlr))
|
|
sdgo(unit);
|
|
}
|
|
|
|
void
|
|
sdgo(unit)
|
|
register int unit;
|
|
{
|
|
register struct sd_softc *sc = &sd_softc[unit];
|
|
register struct hp_device *hp = sc->sc_hd;
|
|
register struct buf *bp = sdtab[unit].b_actf;
|
|
register int pad;
|
|
register struct scsi_fmt_cdb *cmd;
|
|
|
|
if (sc->sc_format_pid) {
|
|
cmd = &sdcmd[unit];
|
|
pad = 0;
|
|
} else {
|
|
cmd = bp->b_flags & B_READ? &sd_read_cmd : &sd_write_cmd;
|
|
*(int *)(&cmd->cdb[2]) = bp->b_cylin;
|
|
pad = howmany(bp->b_bcount, sc->sc_blksize);
|
|
*(u_short *)(&cmd->cdb[7]) = pad;
|
|
pad = (bp->b_bcount & (sc->sc_blksize - 1)) != 0;
|
|
#ifdef DEBUG
|
|
if (pad)
|
|
printf("sd%d: partial block xfer -- %x bytes\n",
|
|
unit, bp->b_bcount);
|
|
#endif
|
|
sdstats[unit].sdtransfers++;
|
|
}
|
|
if (scsigo(hp->hp_ctlr, hp->hp_slave, sc->sc_punit, bp, cmd, pad) == 0) {
|
|
if (hp->hp_dk >= 0) {
|
|
dk_busy |= 1 << hp->hp_dk;
|
|
++dk_seek[hp->hp_dk];
|
|
++dk_xfer[hp->hp_dk];
|
|
dk_wds[hp->hp_dk] += bp->b_bcount >> 6;
|
|
}
|
|
return;
|
|
}
|
|
#ifdef DEBUG
|
|
if (sddebug & SDB_ERROR)
|
|
printf("sd%d: sdstart: %s adr %d blk %d len %d ecnt %d\n",
|
|
unit, bp->b_flags & B_READ? "read" : "write",
|
|
bp->b_un.b_addr, bp->b_cylin, bp->b_bcount,
|
|
sdtab[unit].b_errcnt);
|
|
#endif
|
|
bp->b_flags |= B_ERROR;
|
|
bp->b_error = EIO;
|
|
sdfinish(unit, sc, bp);
|
|
}
|
|
|
|
void
|
|
sdintr(unit, stat)
|
|
register int unit;
|
|
int stat;
|
|
{
|
|
register struct sd_softc *sc = &sd_softc[unit];
|
|
register struct buf *bp = sdtab[unit].b_actf;
|
|
register struct hp_device *hp = sc->sc_hd;
|
|
int cond;
|
|
|
|
if (bp == NULL) {
|
|
printf("sd%d: bp == NULL\n", unit);
|
|
return;
|
|
}
|
|
if (hp->hp_dk >= 0)
|
|
dk_busy &=~ (1 << hp->hp_dk);
|
|
if (stat) {
|
|
#ifdef DEBUG
|
|
if (sddebug & SDB_ERROR)
|
|
printf("sd%d: sdintr: bad scsi status 0x%x\n",
|
|
unit, stat);
|
|
#endif
|
|
cond = sderror(unit, sc, hp, stat);
|
|
if (cond) {
|
|
if (cond < 0 && sdtab[unit].b_errcnt++ < SDRETRY) {
|
|
#ifdef DEBUG
|
|
if (sddebug & SDB_ERROR)
|
|
printf("sd%d: retry #%d\n",
|
|
unit, sdtab[unit].b_errcnt);
|
|
#endif
|
|
sdstart(unit);
|
|
return;
|
|
}
|
|
bp->b_flags |= B_ERROR;
|
|
bp->b_error = EIO;
|
|
}
|
|
}
|
|
sdfinish(unit, sc, bp);
|
|
}
|
|
|
|
int
|
|
sdread(dev, uio, flags)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int flags;
|
|
{
|
|
register int unit = sdunit(dev);
|
|
register int pid;
|
|
|
|
if ((pid = sd_softc[unit].sc_format_pid) &&
|
|
pid != uio->uio_procp->p_pid)
|
|
return (EPERM);
|
|
|
|
return (physio(sdstrategy, NULL, dev, B_READ, minphys, uio));
|
|
}
|
|
|
|
int
|
|
sdwrite(dev, uio, flags)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int flags;
|
|
{
|
|
register int unit = sdunit(dev);
|
|
register int pid;
|
|
|
|
if ((pid = sd_softc[unit].sc_format_pid) &&
|
|
pid != uio->uio_procp->p_pid)
|
|
return (EPERM);
|
|
|
|
return (physio(sdstrategy, NULL, dev, B_WRITE, minphys, uio));
|
|
}
|
|
|
|
int
|
|
sdioctl(dev, cmd, data, flag, p)
|
|
dev_t dev;
|
|
int cmd;
|
|
caddr_t data;
|
|
int flag;
|
|
struct proc *p;
|
|
{
|
|
register int unit = sdunit(dev);
|
|
register struct sd_softc *sc = &sd_softc[unit];
|
|
|
|
switch (cmd) {
|
|
default:
|
|
return (EINVAL);
|
|
|
|
case SDIOCSFORMAT:
|
|
/* take this device into or out of "format" mode */
|
|
if (suser(p->p_ucred, &p->p_acflag))
|
|
return(EPERM);
|
|
|
|
if (*(int *)data) {
|
|
if (sc->sc_format_pid)
|
|
return (EPERM);
|
|
sc->sc_format_pid = p->p_pid;
|
|
} else
|
|
sc->sc_format_pid = 0;
|
|
return (0);
|
|
|
|
case SDIOCGFORMAT:
|
|
/* find out who has the device in format mode */
|
|
*(int *)data = sc->sc_format_pid;
|
|
return (0);
|
|
|
|
case SDIOCSCSICOMMAND:
|
|
/*
|
|
* Save what user gave us as SCSI cdb to use with next
|
|
* read or write to the char device.
|
|
*/
|
|
if (sc->sc_format_pid != p->p_pid)
|
|
return (EPERM);
|
|
if (legal_cmds[((struct scsi_fmt_cdb *)data)->cdb[0]] == 0)
|
|
return (EINVAL);
|
|
bcopy(data, (caddr_t)&sdcmd[unit], sizeof(sdcmd[0]));
|
|
return (0);
|
|
|
|
case SDIOCSENSE:
|
|
/*
|
|
* return the SCSI sense data saved after the last
|
|
* operation that completed with "check condition" status.
|
|
*/
|
|
bcopy((caddr_t)&sdsense[unit], data, sizeof(sdsense[0]));
|
|
return (0);
|
|
|
|
}
|
|
/*NOTREACHED*/
|
|
}
|
|
|
|
int
|
|
sdsize(dev)
|
|
dev_t dev;
|
|
{
|
|
register int unit = sdunit(dev);
|
|
register struct sd_softc *sc = &sd_softc[unit];
|
|
|
|
if (unit >= NSD || (sc->sc_flags & SDF_ALIVE) == 0)
|
|
return(-1);
|
|
|
|
return(sc->sc_info.part[sdpart(dev)].nblocks);
|
|
}
|
|
|
|
/*
|
|
* Non-interrupt driven, non-dma dump routine.
|
|
*/
|
|
int
|
|
sddump(dev)
|
|
dev_t dev;
|
|
{
|
|
int part = sdpart(dev);
|
|
int unit = sdunit(dev);
|
|
register struct sd_softc *sc = &sd_softc[unit];
|
|
register struct hp_device *hp = sc->sc_hd;
|
|
register daddr_t baddr;
|
|
register int maddr;
|
|
register int pages, i;
|
|
int stat;
|
|
extern int lowram;
|
|
|
|
/*
|
|
* Hmm... all vax drivers dump maxfree pages which is physmem minus
|
|
* the message buffer. Is there a reason for not dumping the
|
|
* message buffer? Savecore expects to read 'dumpsize' pages of
|
|
* dump, where dumpsys() sets dumpsize to physmem!
|
|
*/
|
|
pages = physmem;
|
|
|
|
/* is drive ok? */
|
|
if (unit >= NSD || (sc->sc_flags & SDF_ALIVE) == 0)
|
|
return (ENXIO);
|
|
/* dump parameters in range? */
|
|
if (dumplo < 0 || dumplo >= sc->sc_info.part[part].nblocks)
|
|
return (EINVAL);
|
|
if (dumplo + ctod(pages) > sc->sc_info.part[part].nblocks)
|
|
pages = dtoc(sc->sc_info.part[part].nblocks - dumplo);
|
|
maddr = lowram;
|
|
baddr = dumplo + sc->sc_info.part[part].strtblk;
|
|
/* scsi bus idle? */
|
|
if (!scsireq(&sc->sc_dq)) {
|
|
scsireset(hp->hp_ctlr);
|
|
sdreset(sc, sc->sc_hd);
|
|
printf("[ drive %d reset ] ", unit);
|
|
}
|
|
for (i = 0; i < pages; i++) {
|
|
#define NPGMB (1024*1024/NBPG)
|
|
/* print out how many Mbs we have dumped */
|
|
if (i && (i % NPGMB) == 0)
|
|
printf("%d ", i / NPGMB);
|
|
#undef NPBMG
|
|
pmap_enter(pmap_kernel(), vmmap, maddr, VM_PROT_READ, TRUE);
|
|
stat = scsi_tt_write(hp->hp_ctlr, hp->hp_slave, sc->sc_punit,
|
|
vmmap, NBPG, baddr, sc->sc_bshift);
|
|
if (stat) {
|
|
printf("sddump: scsi write error 0x%x\n", stat);
|
|
return (EIO);
|
|
}
|
|
maddr += NBPG;
|
|
baddr += ctod(1);
|
|
}
|
|
return (0);
|
|
}
|
|
#endif
|