NetBSD/sbin/reboot/boot_atari.8

201 lines
6.3 KiB
Groff

.\" $NetBSD: boot_atari.8,v 1.1 1996/06/27 11:07:56 leo Exp $
.\"
.\" Copyright (c) 1990, 1991 The Regents of the University of California.
.\" All rights reserved.
.\"
.\" This code is derived from software contributed to Berkeley by
.\" the Systems Programming Group of the University of Utah Computer
.\" Science Department.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by the University of
.\" California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" From:
.\" @(#)boot_hp300.8 8.2 (Berkeley) 4/19/94
.\"
.Dd June 21, 1996
.Dt boot 8
.Os
.Sh NAME
.Nm boot
.Nd
system bootstrapping procedures
.Sh DESCRIPTION
.Sy Power fail and crash recovery
.Pp
When the
.Tn NetBSD
kernel is booted normally (using one of the two methods discussed below),
it initializes itself and proceeds to boot the system. An automatic
consistency check of the file systems takes place, and unless this
fails, the system comes up to multi-user operations. The proper way
to shut the system down is with the
.Xr shutdown 8
command.
.Pp
If the system crashes, it will enter the kernel debugger,
.Xr ddb 8
,if it is configured in the kernel. If the debugger is not present,
or the debugger is exited, the system will attempt a dump to the
configured dump device (which will be automatically recovered with
.Xr savecore 8
during the next boot cycle). After the dump is complete (successful
or not), the system will attempt a reboot.
.Pp
.Sy Booting NetBSD using the bootloader
.Pp
When a bootable
.Tn NetBSD
partition is created by means of
.Xr installboot 8
, the Atari BIOS will automatically start the NetBSD bootloader. By default
it will load the kernel image
.Pa /netbsd
and attempts to boot it into multi-user mode. This behaviour can be changed by
either keeping the
.Pa Alternate
or the
.Pa Right-Shift
key pressed during the boot. When
the
.Pa Alternate
key is pressed, the bootstrap is aborted, causing the BIOS
to continue scanning the disks for a bootable partition (this is compatible
with AHDI 3.0). Pressing the
.Pa Right-Shift
key during the boot, causes the boot loader to enter the interactive mode.
In interactive mode, the command line looks like:
.Bd -ragged -offset indent
.Pp
.Op Ar OS-type
.Op Ar boot-path
.Op Ar boot-options
.Ed
.Pp
Each component of the command can be ommitted in which case the defaults
indicated will be used.
.Bl -tag -width
.It OS-type:
.Bl -tag -compact -width ".netbsd (default)"
.It .netbsd (the default)
.It .linux
.It .asv
.It .tos
.El
.Pp
If something other than
.Pa .netbsd
is specified, control is returned to the BIOS with the boot preference set to
the selected type. Due to limitations of the BIOS however, the search for
bootblocks is continued rather than restarted.
.It boot-path
This gives you the opportunity to boot another kernel, say:
.Pa /netbsd.old.
The default is
.Pa /netbsd
.It boot-options
These options are a subset of the
.Xr loadbsd
options.
.Bl -tag -width flag -compact
.It Fl a
Boot into multi-user mode (the default)
.It Fl b
Ask for a root device
.It Fl d
Enter the kernel debugger
.El
.El
.Pp
.Sy Booting using the loadbsd program
.Pp
When you want (or have to) start NetBSD from GEM, you have to use the
.Xr loadbsd
program that is supplied on the kernel-floppy. The loadbsd command line
specification is:
.Bd -ragged -offset indent
.Nm loadbsd
.Op Fl abdhstwDV
.Op Fl S Ar amount
.Op Fl T Ar amount
.Ar kernel-path
.Ed
.Pp
Description of options:
.Bl -tag -width flag
.It Fl a
Boot automatically into multi-user mode.
.It Fl b
Ask for the root device the kernel must use.
.It Fl d
Enter the kernel debugger after booting.
.It Fl h
Print a help screen that tries to explain the same options as mentioned
here.
.It Fl o Ar outputfile
Write all output to the file
.Ar outputfile.
.It Fl s
Tell NetBSD only to use ST compatible RAM.
.It Fl t
Test loading of the kernel but don't start NetBSD.
.It Fl w
Wait for a keypress before exiting loadbsd. This is useful when starting this
program under GEM.
.It Fl D
Show debugging output while booting the kernel.
.It Fl S Ar amount
Set the amount of available ST compatible RAM in bytes. Normally this
value is set automatically from the values initialized by the BIOS.
.It Fl T Ar amount
Set the amount of available TT compatible RAM in bytes. Normally this
value is set automatically from the values initialized by the BIOS.
.It Fl V
Print the version of
.Xr loadbsd
that you are using.
.It Ar kernel-path
This is a GEMDOS path specification of the kernel to boot.
.El
.Pp
Note: Because the loadbsd program can only read kernels from a GEMDOS
filesystem, the file
.Ar /netbsd
is usually not the same as the actual kernel booted. This can cause some
programs to fail.
.Sh FILES
.Bl -tag -width /netbsd -compact
.It Pa /netbsd
system kernel
.El
.Sh SEE ALSO
.Xr ddb 8 ,
.Xr savecore 8 ,
.Xr shutdown 8