575 lines
15 KiB
C
575 lines
15 KiB
C
/*
|
|
* Copyright (c) 1998 Martijn Plak. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
* 4. Altered versions must be plainly marked as such, and must not be
|
|
* misrepresented as being the original software and/or documentation.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*---------------------------------------------------------------------------
|
|
*
|
|
* isdn4bsd layer1 driver for Dynalink IS64PH isdn TA
|
|
* ==================================================
|
|
*
|
|
* $Id: isic_isapnp_dynalink.c,v 1.4 2002/03/24 20:35:51 martin Exp $
|
|
*
|
|
* last edit-date: [Fri Jan 5 11:38:29 2001]
|
|
*
|
|
* written by Martijn Plak (martijn@be3.com)
|
|
*
|
|
* -mp 11 jun 1998 first try, code borrowed from Creatix driver
|
|
* -mp 18 jun 1998 cleaned up code
|
|
* -hm FreeBSD PnP
|
|
* -mp 17 dec 1998 made it compile again
|
|
*
|
|
*---------------------------------------------------------------------------*/
|
|
|
|
/* NOTES:
|
|
|
|
This driver was written for the Dynalink IS64PH ISDN TA, based on two
|
|
Siemens chips (HSCX 21525 and ISAC 2186). It is sold in the Netherlands.
|
|
|
|
model numbers found on (my) card:
|
|
IS64PH, TAS100H-N, P/N:89590555, TA200S100045521
|
|
|
|
chips:
|
|
Siemens PSB 21525N, HSCX TE V2.1
|
|
Siemens PSB 2186N, ISAC-S TE V1.1
|
|
95MS14, PNP
|
|
|
|
plug-and-play info:
|
|
device id "ASU1688"
|
|
vendor id 0x88167506
|
|
serial 0x00000044
|
|
i/o port 4 byte alignment, 4 bytes requested,
|
|
10 bit i/o decoding, 0x100-0x3f8 (?)
|
|
irq 3,4,5,9,10,11,12,15, high true, edge sensitive
|
|
|
|
At the moment I'm writing this Dynalink is replacing this card with
|
|
one based on a single Siemens chip (IPAC). It will apparently be sold
|
|
under the same model name.
|
|
|
|
This driver might also work for Asuscom cards.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: isic_isapnp_dynalink.c,v 1.4 2002/03/24 20:35:51 martin Exp $");
|
|
|
|
#include "opt_isicpnp.h"
|
|
#ifdef ISICPNP_DYNALINK
|
|
|
|
/* HEADERS
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/socket.h>
|
|
#include <net/if.h>
|
|
|
|
#if defined(__NetBSD__) && __NetBSD_Version__ >= 104230000
|
|
#include <sys/callout.h>
|
|
#endif
|
|
|
|
#ifdef __FreeBSD__
|
|
#if __FreeBSD__ >= 3
|
|
#include <sys/ioccom.h>
|
|
#else
|
|
#include <sys/ioctl.h>
|
|
#endif
|
|
#include <machine/clock.h>
|
|
#include <i386/isa/isa_device.h>
|
|
#include <i386/isa/pnp.h>
|
|
#elif defined(__bsdi__)
|
|
#include <i386/isa/pnp.h>
|
|
#else
|
|
#include <machine/bus.h>
|
|
#include <sys/device.h>
|
|
#endif
|
|
|
|
#ifdef __FreeBSD__
|
|
#include <machine/i4b_debug.h>
|
|
#include <machine/i4b_ioctl.h>
|
|
#else
|
|
#include <netisdn/i4b_debug.h>
|
|
#include <netisdn/i4b_ioctl.h>
|
|
#endif
|
|
|
|
#include <netisdn/i4b_global.h>
|
|
#include <netisdn/i4b_l2.h>
|
|
#include <netisdn/i4b_l1l2.h>
|
|
#include <netisdn/i4b_mbuf.h>
|
|
|
|
#include <dev/ic/isic_l1.h>
|
|
#include <dev/ic/isac.h>
|
|
#include <dev/ic/hscx.h>
|
|
|
|
#if defined(__FreeBSD__) || defined(__bsdi__)
|
|
static void dynalink_read_fifo(void *buf, const void *base, size_t len);
|
|
static void dynalink_write_fifo(void *base, const void *buf, size_t len);
|
|
static void dynalink_write_reg(u_char *base, u_int offset, u_int v);
|
|
static u_char dynalink_read_reg(u_char *base, u_int offset);
|
|
#endif
|
|
|
|
#ifdef __FreeBSD__
|
|
extern struct isa_driver isicdriver;
|
|
#endif
|
|
#ifdef __bsdi__
|
|
extern struct cfdriver isiccd;
|
|
#endif
|
|
|
|
#if !defined(__FreeBSD__) && !defined(__bsdi__)
|
|
static void dynalink_read_fifo(struct isic_softc *sc, int what, void *buf, size_t size);
|
|
static void dynalink_write_fifo(struct isic_softc *sc, int what, const void *buf, size_t size);
|
|
static void dynalink_write_reg(struct isic_softc *sc, int what, bus_size_t offs, u_int8_t data);
|
|
static u_int8_t dynalink_read_reg(struct isic_softc *sc, int what, bus_size_t offs);
|
|
void isic_attach_Dyn(struct isic_softc *sc);
|
|
#endif
|
|
|
|
/* io address mapping */
|
|
#define ISAC 0
|
|
#define HSCX 1
|
|
#define ADDR 2
|
|
|
|
/* ADDR bits */
|
|
#define ADDRMASK 0x7F
|
|
#define RESET 0x80
|
|
|
|
/* HSCX register offsets */
|
|
#define HSCXA 0x00
|
|
#define HSCXB 0x40
|
|
|
|
#if defined(__FreeBSD__) || defined(__bsdi__)
|
|
/* base address juggling */
|
|
#define HSCXB_HACK 0x400
|
|
#define IOBASE(addr) (((int)addr)&0x3FC)
|
|
#define IOADDR(addr) (((int)addr)&0x3FF)
|
|
#define IS_HSCXB_HACK(addr) ((((int)addr)&HSCXB_HACK)?HSCXB:HSCXA)
|
|
#endif
|
|
|
|
#ifdef __FreeBSD__
|
|
/* ISIC probe and attach
|
|
*/
|
|
|
|
int
|
|
isic_probe_Dyn(struct isa_device *dev, unsigned int iobase2)
|
|
{
|
|
|
|
struct isic_softc *sc = &l1_sc[dev->id_unit];
|
|
|
|
if(dev->id_unit >= ISIC_MAXUNIT)
|
|
{
|
|
printf("isic%d: Error, unit %d >= ISIC_MAXUNIT for Dynalink IS64PH.\n",
|
|
dev->id_unit, dev->id_unit);
|
|
return(0);
|
|
}
|
|
sc->sc_unit = dev->id_unit;
|
|
|
|
/* check IRQ validity */
|
|
|
|
switch(ffs(dev->id_irq) - 1)
|
|
{
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
case 9:
|
|
case 10:
|
|
case 11:
|
|
case 12:
|
|
case 15:
|
|
break;
|
|
|
|
default:
|
|
printf("isic%d: Error, invalid IRQ [%d] specified for Dynalink IS64PH.\n",
|
|
dev->id_unit, ffs(dev->id_irq)-1);
|
|
return(0);
|
|
break;
|
|
}
|
|
sc->sc_irq = dev->id_irq;
|
|
|
|
/* check if memory addr specified */
|
|
|
|
if(dev->id_maddr)
|
|
{
|
|
printf("isic%d: Error, mem addr 0x%lx specified for Dynalink IS64PH.\n",
|
|
dev->id_unit, (u_long)dev->id_maddr);
|
|
return (0);
|
|
}
|
|
dev->id_msize = 0;
|
|
|
|
/* check if we got an iobase */
|
|
if ( (dev->id_iobase < 0x100) ||
|
|
(dev->id_iobase > 0x3f8) ||
|
|
(dev->id_iobase & 3) )
|
|
{
|
|
printf("isic%d: Error, invalid iobase 0x%x specified for Dynalink!\n", dev->id_unit, dev->id_iobase);
|
|
return(0);
|
|
}
|
|
sc->sc_port = dev->id_iobase;
|
|
|
|
/* setup access routines */
|
|
sc->clearirq = NULL;
|
|
sc->readreg = dynalink_read_reg;
|
|
sc->writereg = dynalink_write_reg;
|
|
sc->readfifo = dynalink_read_fifo;
|
|
sc->writefifo = dynalink_write_fifo;
|
|
|
|
/* setup card type */
|
|
sc->sc_cardtyp = CARD_TYPEP_DYNALINK;
|
|
|
|
/* setup IOM bus type */
|
|
sc->sc_bustyp = BUS_TYPE_IOM2;
|
|
|
|
sc->sc_ipac = 0;
|
|
sc->sc_bfifolen = HSCX_FIFO_LEN;
|
|
|
|
/* setup ISAC and HSCX base addr */
|
|
ISAC_BASE = (caddr_t) sc->sc_port;
|
|
HSCX_A_BASE = (caddr_t) sc->sc_port + 1;
|
|
HSCX_B_BASE = (caddr_t) sc->sc_port + 1 + HSCXB_HACK;
|
|
|
|
/* Read HSCX A/B VSTR. Expected value is 0x05 (V2.1). */
|
|
if( ((HSCX_READ(0, H_VSTR) & 0xf) != 0x5) ||
|
|
((HSCX_READ(1, H_VSTR) & 0xf) != 0x5) )
|
|
{
|
|
printf("isic%d: HSCX VSTR test failed for Dynalink\n",
|
|
dev->id_unit);
|
|
printf("isic%d: HSC0: VSTR: %#x\n",
|
|
dev->id_unit, HSCX_READ(0, H_VSTR));
|
|
printf("isic%d: HSC1: VSTR: %#x\n",
|
|
dev->id_unit, HSCX_READ(1, H_VSTR));
|
|
return (0);
|
|
}
|
|
|
|
return (1);
|
|
}
|
|
|
|
int
|
|
isic_attach_Dyn(struct isa_device *dev, unsigned int iobase2)
|
|
{
|
|
outb((dev->id_iobase)+ADDR, RESET);
|
|
DELAY(SEC_DELAY / 10);
|
|
outb((dev->id_iobase)+ADDR, 0);
|
|
DELAY(SEC_DELAY / 10);
|
|
return(1);
|
|
}
|
|
|
|
#elif defined(__bsdi__)
|
|
|
|
/* ISIC probe and attach
|
|
*/
|
|
|
|
static int
|
|
set_softc(struct isic_softc *sc, struct isa_attach_args *ia, int unit)
|
|
{
|
|
if (unit >= NISIC)
|
|
return 0;
|
|
sc->sc_unit = unit;
|
|
switch(ffs(ia->ia_irq) - 1)
|
|
{
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
case 9:
|
|
case 10:
|
|
case 11:
|
|
case 12:
|
|
case 15:
|
|
break;
|
|
|
|
default:
|
|
printf("isic%d: Error, invalid IRQ [%d] specified for Dynalink IS64PH.\n",
|
|
unit, ffs(ia->ia_irq)-1);
|
|
return(0);
|
|
break;
|
|
}
|
|
sc->sc_irq = ia->ia_irq;
|
|
|
|
/* check if memory addr specified */
|
|
|
|
if(ia->ia_maddr)
|
|
{
|
|
printf("isic%d: Error, mem addr 0x%lx specified for Dynalink IS64PH.\n",
|
|
unit, (u_long)ia->ia_maddr);
|
|
return (0);
|
|
}
|
|
|
|
/* check if we got an iobase */
|
|
if ( (ia->ia_iobase < 0x100) ||
|
|
(ia->ia_iobase > 0x3f8) ||
|
|
(ia->ia_iobase & 3) )
|
|
{
|
|
printf("isic%d: Error, invalid iobase 0x%x specified for Dynalink!\n", unit, ia->ia_iobase);
|
|
return(0);
|
|
}
|
|
sc->sc_port = ia->ia_iobase;
|
|
|
|
/* setup access routines */
|
|
sc->clearirq = NULL;
|
|
sc->readreg = dynalink_read_reg;
|
|
sc->writereg = dynalink_write_reg;
|
|
sc->readfifo = dynalink_read_fifo;
|
|
sc->writefifo = dynalink_write_fifo;
|
|
|
|
/* setup card type */
|
|
sc->sc_cardtyp = CARD_TYPEP_DYNALINK;
|
|
|
|
/* setup IOM bus type */
|
|
sc->sc_bustyp = BUS_TYPE_IOM2;
|
|
|
|
sc->sc_ipac = 0;
|
|
sc->sc_bfifolen = HSCX_FIFO_LEN;
|
|
|
|
/* setup ISAC and HSCX base addr */
|
|
ISAC_BASE = (caddr_t) sc->sc_port;
|
|
HSCX_A_BASE = (caddr_t) sc->sc_port + 1;
|
|
HSCX_B_BASE = (caddr_t) sc->sc_port + 1 + HSCXB_HACK;
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
isapnp_match_dynalink(struct device *parent, struct cfdata *cf,
|
|
struct isa_attach_args *ia)
|
|
{
|
|
struct isic_softc dummysc, *sc = &dummysc;
|
|
pnp_resource_t res;
|
|
char *ids[] = {"ASU1688", NULL};
|
|
bzero(&res, sizeof res);
|
|
res.res_irq[0].irq_level = ia->ia_irq;
|
|
res.res_port[0].prt_base = ia->ia_iobase;
|
|
res.res_port[0].prt_length = 4;
|
|
|
|
if (!pnp_assigndev(ids, isiccd.cd_name, &res))
|
|
return (0);
|
|
|
|
ia->ia_irq = res.res_irq[0].irq_level;
|
|
ia->ia_iobase = res.res_port[0].prt_base;
|
|
ia->ia_iosize = res.res_port[0].prt_length;
|
|
|
|
if (set_softc(sc, ia, cf->cf_unit) == 0)
|
|
return 0;
|
|
|
|
/* Read HSCX A/B VSTR. Expected value is 0x05 (V2.1). */
|
|
if( ((HSCX_READ(0, H_VSTR) & 0xf) != 0x5) ||
|
|
((HSCX_READ(1, H_VSTR) & 0xf) != 0x5) )
|
|
{
|
|
printf("isic%d: HSCX VSTR test failed for Dynalink\n",
|
|
cf->cf_unit);
|
|
printf("isic%d: HSC0: VSTR: %#x\n",
|
|
cf->cf_unit, HSCX_READ(0, H_VSTR));
|
|
printf("isic%d: HSC1: VSTR: %#x\n",
|
|
cf->cf_unit, HSCX_READ(1, H_VSTR));
|
|
return (0);
|
|
}
|
|
|
|
cf->cf_flags = FLAG_DYNALINK;
|
|
return (1);
|
|
}
|
|
|
|
int
|
|
isic_attach_Dyn(struct device *parent, struct device *self,
|
|
struct isa_attach_args *ia)
|
|
{
|
|
struct isic_softc *sc = (struct isic_softc *)self;
|
|
int unit = sc->sc_dev.dv_unit;
|
|
|
|
/* Commit the probed attachment values */
|
|
if (set_softc(sc, ia, unit) == 0)
|
|
panic("isic_attach_Dyn: set_softc");
|
|
|
|
outb((ia->ia_iobase)+ADDR, RESET);
|
|
DELAY(SEC_DELAY / 10);
|
|
outb((ia->ia_iobase)+ADDR, 0);
|
|
DELAY(SEC_DELAY / 10);
|
|
return(1);
|
|
}
|
|
|
|
#else
|
|
|
|
void isic_attach_Dyn(struct isic_softc *sc)
|
|
{
|
|
/* setup access routines */
|
|
sc->clearirq = NULL;
|
|
sc->readreg = dynalink_read_reg;
|
|
sc->writereg = dynalink_write_reg;
|
|
sc->readfifo = dynalink_read_fifo;
|
|
sc->writefifo = dynalink_write_fifo;
|
|
|
|
/* setup card type */
|
|
sc->sc_cardtyp = CARD_TYPEP_DYNALINK;
|
|
|
|
/* setup IOM bus type */
|
|
sc->sc_bustyp = BUS_TYPE_IOM2;
|
|
|
|
sc->sc_ipac = 0;
|
|
sc->sc_bfifolen = HSCX_FIFO_LEN;
|
|
|
|
/* Read HSCX A/B VSTR. Expected value is 0x05 (V2.1). */
|
|
if( ((HSCX_READ(0, H_VSTR) & 0xf) != 0x5) || ((HSCX_READ(1, H_VSTR) & 0xf) != 0x5) )
|
|
{
|
|
printf("%s: HSCX VSTR test failed for Dynalink PnP\n",
|
|
sc->sc_dev.dv_xname);
|
|
printf("%s: HSC0: VSTR: %#x\n",
|
|
sc->sc_dev.dv_xname, HSCX_READ(0, H_VSTR));
|
|
printf("%s: HSC1: VSTR: %#x\n",
|
|
sc->sc_dev.dv_xname, HSCX_READ(1, H_VSTR));
|
|
return;
|
|
}
|
|
|
|
bus_space_write_1(sc->sc_maps[0].t, sc->sc_maps[0].h, ADDR, RESET);
|
|
DELAY(SEC_DELAY / 10);
|
|
bus_space_write_1(sc->sc_maps[0].t, sc->sc_maps[0].h, ADDR, 0);
|
|
DELAY(SEC_DELAY / 10);
|
|
}
|
|
|
|
#endif
|
|
|
|
/* LOW-LEVEL DEVICE ACCESS
|
|
|
|
NOTE: The isdn4bsd code expects the two HSCX channels at different
|
|
base addresses. I'm faking this, and remap them to the same address
|
|
in the low-level routines. Search for HSCXB_HACK and IS_HSCXB_HACK.
|
|
|
|
REM: this is only true for the FreeBSD version of I4B!
|
|
*/
|
|
|
|
#if defined(__FreeBSD__) || defined(__bsdi__)
|
|
static void
|
|
dynalink_read_fifo(void *buf, const void *base, size_t len)
|
|
{
|
|
outb(IOBASE(base)+ADDR, 0+IS_HSCXB_HACK(base));
|
|
insb(IOADDR(base), (u_char *)buf, (u_int)len);
|
|
}
|
|
#else
|
|
static void
|
|
dynalink_read_fifo(struct isic_softc *sc, int what, void *buf, size_t size)
|
|
{
|
|
bus_space_tag_t t = sc->sc_maps[0].t;
|
|
bus_space_handle_t h = sc->sc_maps[0].h;
|
|
switch (what) {
|
|
case ISIC_WHAT_ISAC:
|
|
bus_space_write_1(t, h, ADDR, 0);
|
|
bus_space_read_multi_1(t, h, ISAC, buf, size);
|
|
break;
|
|
case ISIC_WHAT_HSCXA:
|
|
bus_space_write_1(t, h, ADDR, HSCXA);
|
|
bus_space_read_multi_1(t, h, HSCX, buf, size);
|
|
break;
|
|
case ISIC_WHAT_HSCXB:
|
|
bus_space_write_1(t, h, ADDR, HSCXB);
|
|
bus_space_read_multi_1(t, h, HSCX, buf, size);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(__FreeBSD__) || defined(__bsdi__)
|
|
static void
|
|
dynalink_write_fifo(void *base, const void *buf, size_t len)
|
|
{
|
|
outb(IOBASE(base)+ADDR, 0+IS_HSCXB_HACK(base));
|
|
outsb(IOADDR(base), (u_char *)buf, (u_int)len);
|
|
}
|
|
#else
|
|
static void dynalink_write_fifo(struct isic_softc *sc, int what, const void *buf, size_t size)
|
|
{
|
|
bus_space_tag_t t = sc->sc_maps[0].t;
|
|
bus_space_handle_t h = sc->sc_maps[0].h;
|
|
switch (what) {
|
|
case ISIC_WHAT_ISAC:
|
|
bus_space_write_1(t, h, ADDR, 0);
|
|
bus_space_write_multi_1(t, h, ISAC, (u_int8_t*)buf, size);
|
|
break;
|
|
case ISIC_WHAT_HSCXA:
|
|
bus_space_write_1(t, h, ADDR, HSCXA);
|
|
bus_space_write_multi_1(t, h, HSCX, (u_int8_t*)buf, size);
|
|
break;
|
|
case ISIC_WHAT_HSCXB:
|
|
bus_space_write_1(t, h, ADDR, HSCXB);
|
|
bus_space_write_multi_1(t, h, HSCX, (u_int8_t*)buf, size);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(__FreeBSD__) || defined(__bsdi__)
|
|
static void
|
|
dynalink_write_reg(u_char *base, u_int offset, u_int v)
|
|
{
|
|
outb(IOBASE(base)+ADDR, (offset+IS_HSCXB_HACK(base))&ADDRMASK);
|
|
outb(IOADDR(base), (u_char)v);
|
|
}
|
|
#else
|
|
static void dynalink_write_reg(struct isic_softc *sc, int what, bus_size_t offs, u_int8_t data)
|
|
{
|
|
bus_space_tag_t t = sc->sc_maps[0].t;
|
|
bus_space_handle_t h = sc->sc_maps[0].h;
|
|
switch (what) {
|
|
case ISIC_WHAT_ISAC:
|
|
bus_space_write_1(t, h, ADDR, offs);
|
|
bus_space_write_1(t, h, ISAC, data);
|
|
break;
|
|
case ISIC_WHAT_HSCXA:
|
|
bus_space_write_1(t, h, ADDR, HSCXA+offs);
|
|
bus_space_write_1(t, h, HSCX, data);
|
|
break;
|
|
case ISIC_WHAT_HSCXB:
|
|
bus_space_write_1(t, h, ADDR, HSCXB+offs);
|
|
bus_space_write_1(t, h, HSCX, data);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(__FreeBSD__) || defined(__bsdi__)
|
|
static u_char
|
|
dynalink_read_reg(u_char *base, u_int offset)
|
|
{
|
|
outb(IOBASE(base)+ADDR, (offset+IS_HSCXB_HACK(base))&ADDRMASK);
|
|
return (inb(IOADDR(base)));
|
|
}
|
|
#else
|
|
static u_int8_t dynalink_read_reg(struct isic_softc *sc, int what, bus_size_t offs)
|
|
{
|
|
bus_space_tag_t t = sc->sc_maps[0].t;
|
|
bus_space_handle_t h = sc->sc_maps[0].h;
|
|
switch (what) {
|
|
case ISIC_WHAT_ISAC:
|
|
bus_space_write_1(t, h, ADDR, offs);
|
|
return bus_space_read_1(t, h, ISAC);
|
|
case ISIC_WHAT_HSCXA:
|
|
bus_space_write_1(t, h, ADDR, HSCXA+offs);
|
|
return bus_space_read_1(t, h, HSCX);
|
|
case ISIC_WHAT_HSCXB:
|
|
bus_space_write_1(t, h, ADDR, HSCXB+offs);
|
|
return bus_space_read_1(t, h, HSCX);
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#endif /* ISICPNP_DYNALINK */
|