NetBSD/usr.sbin/sendmail/RELEASE_NOTES

2183 lines
102 KiB
Plaintext

8.6.5/8.6.5 94/01/13
Security fix: /.forward could be owned by anyone (the test
to allow root to own any file was backwards). From
Bob Campbell at U.C. Berkeley.
Security fix: group ids were not completely set when programs
were invoked. This caused programs to have group
permissions they should not have had (usually group
daemon instead of their own group). In particular,
Perl scripts would refuse to run.
Security: check to make sure files that are written are not
symbolic links (at least under some circumstances).
Although this does not respond to a specific known
attack, it's just a good idea. Suggested by
Christian Wettergren.
Security fix: if a user had an NFS mounted home directory on
a system with a restricted shell listed in their
/etc/passwd entry, they could still execute any
program by putting that in their .forward file.
This fix prevents that by insisting that their shell
appear in /etc/shells before allowing a .forward to
execute a program or write a file. You can disable
this by putting "*" in /etc/shells. It also won't
permit world-writable :include: files to reference
programs or files (there's no way to disable this).
These behaviours are only one level deep -- for
example, it is legal for a world-writable :include:
file to reference an alias that writes a file, on
the assumption that the alias file is well controlled.
Security fix: root was not treated suspiciously enough when
looking into subdirectories. This would potentially
allow a cracker to examine files that were publically
readable but in a non-publically searchable directory.
Fix a problem that causes an error on QUIT on a cached
connection to create problems on the current job.
These are typically unrelated, so errors occur in
the wrong place.
Reset CurrentLA in sendall() -- this makes sendmail queue
runs more responsive to load average, and fixes a
problem that ignored the load average in locally
generated mail. From Eric Wassenaar.
Fix possible core dump on aliases with null LHS. From
John Orthoefer of BB&N.
Revert to using flock() whenever possible -- there are just
too many bugs in fcntl() locking, particularly over
NFS, that cause sendmail to fail in perverse ways.
Fix a bug that causes the connection cache to get confused
when sending error messages. This resulted in
"unexpected close" messages. It should fix itself
on the following queue run. Problem noted by
Liudvikas Bukys of Rochester University.
Include $k in $=k as documented in the Install & Op Guide.
This seems odd, but it was documented.... From
Michael Corrigan of UCSD.
Fix problem that caused :include:s from alias files to be
forced to be owned by root instead of daemon
(actually DefUid). From Tim Irvin.
Diagnose unrecognized I option values -- from Mortin Forssen
of the Chalmers University of Technology.
Make "error" mailer work consistently when there is no error
code associated with it -- previously it returned OK
even though there was a real problem. Now it assumes
EX_UNAVAILABLE.
Fix bug that caused the last header line of messages that had
no body and which were terminated with EOF instead of
"." to be discarded. Problem noted by Liudvikas Bukys.
Fix core dump on SMTP mail to programs that failed -- it tried
to go to a "next MX host" when none existed, causing
a core dump. From der Mouse at McGill University.
Change IDENTPROTO from a defined/not defined to a 0/1 switch;
this makes it easier to turn it off (using
-DIDENTPROTO=0 in the Makefile). From der Mouse.
Fix YP_MASTER_NAME store to use the unupdated result of
gethostname() (instead of myhostname(), which tries
to fully qualify the name) to be consistent with
SunOS. If your hostname is unqualified, this fixes
transfers to slave servers. Bug noted by Keith
McMillan of Ameritech Services, Inc.
Fix Ultrix problem: gethostbyname() can return a very large
(> 500) h_length field, which causes the sockaddr
to be trashed. Use the size of the sockaddr instead.
Fix from Bob Manson of Ohio State.
Don't assume "-a." on host lookups if NAMED_BIND is not
defined -- this confuses gethostbyname on hosts
file lookups, which doesn't understand the trailing
dot convention.
Log SMTP server subprocesses that die with a signal instead
of from a clean exit.
If you don't have option "I" set, don't assume that a DNS
"host unknown" message is authoritative -- it
might still be found in /etc/hosts.
Fix a problem that would cause Deferred: messages to be sent
as the subject of an error message, even though the
actual cause of a message was more severe than that.
Problem noted by Chris Seabrook of OSSI.
Fix race condition in DBM alias file locking. From Kyle
Jones of UUNET.
Limit delivery syslog line length to avoid bugs in some
versions of syslog(3). This adds a new compile time
variable SYSLOG_BUFSIZE. From Jay Plett of Princeton
University, which is in turn derived from IDA.
Fix quotes inside of comments in addresses -- previously
it insisted that they be balanced, but the 822 spec
says that they should be ignored.
Dump open file state to syslog upon receiving SIGUSR1 (for
debugging). This also evaluates ruleset 89, if set
(with the null input), and logs the result. This
should be used sparingly, since the rewrite process
is not reentrant.
Change -qI, -qR, and -qS flags to be case-insensitive as
documented in the Bat Book.
If the mailer returned EX_IOERR or EX_OSERR, sendmail did not
return an error message and did not requeue the message.
Fix based on code from Roland Dirlewanger of
Reseau Regional Aquarel, Bordeaux, France.
Fix a problem that caused a seg fault if you got a 421 error
code during some parts of connection initialization.
I've only seen this when talking to buggy mailers on
the other end, but it shouldn't give a seg fault in
any case. From Amir Plivatsky.
Fix core dump caused by a ruleset call that returns null.
Fix from Bryan Costales of ICSI.
Full-Name: field was being ignored. Fix from Motonori Nakamura
of Kyoto University.
Fix a possible problem with very long input lines in setproctitle.
From P{r Emanuelsson.
Avoid putting "This is a warning message" out on return receipts.
Suggested by Douglas Anderson.
Detect loops caused by recursive ruleset calls. Suggested by
Bryan Costales.
Initialize non-alias maps during alias rebuilds -- they may be
needed for parsing. Problem noted by Douglas Anderson.
Log sender address even if no message was collected in SMTP
(e.g., if all RCPTs failed). Suggested by Motonori
Nakamura.
Don't reflect the owner-list contents into the envelope sender
address if the value contains ", :, /, or | (to avoid
illegal addresses appearing there).
Efficiency hack for toktype macro -- from Craig Partridge of
BB&N.
Clean up DNS error printing so that a host name is always
included.
Remember to set $i during queue runs. Reported by Stephen
Campbell of Dartmouth University.
If ${HOSTALIASES} is set, use it during canonification so that
headers are properly mapped. Reported by Anne Bennett
of Concordia University.
Avoid printing misleading error message if SMTP mailer (not
using [IPC]) should die on a core dump.
Avoid incorrect diagnosis of "file 1 closed" when it is caused
by the other end closing the connection. From
Dave Morrison of Oracle.
Improve several of the error messages printed by "mailq"
to include a host name or other useful information.
Add NetInfo preliminary support for NeXT systems. From Vince
DeMarco.
Fix a glitch that sometimes caused :include:s that pointed to
NFS filesystems that were down to give an "aliasing/
forwarding loop broken" message instead of queueing
the message for retry. Noted by William C Fenner of
the NRL Connection Machine Facility.
Fix a problem that could cause a core dump if the input sequence
had (or somehow acquired) a \231 character.
Make sure that route-addrs always have <angle brackets> around
them in non-SMTP envelopes (SMTP envelopes already do
this properly).
Avoid wierd headers on unbalanced punctuation of the form:
``Joe User <user)'' -- this caused reference to the
null macro. Fix from Rick McCarty of IO.COM.
Fix a problem that caused an alias "user: user@local.host" to
not have the QNOTREMOTE bit set; this caused configs
to act as if FEATURE(notsticky) was defined even when
it was not. The effect of the problem was to make it
very hard to to set up satellite sites that had a few
local accounts, with everything else forwarded to a
corporate hub. Reported by Detlef Drewanz of the
University of Rostock and Mark Frost of NCD.
Change queuing to not call rulesets 3, {1 or 2}, 4 on header
addresses. This is more efficient (fewer name server
calls) and fixes certain unusual configurations, such
as those that have ruleset 4 do something that is
non-idempotent unless a mailer-specific ruleset did
something else. Problem reported by Brian J. Coan
of the Institute for Global Communications.
Fix the "obsolete argument" routine in main to better understand
new arguments. For example, if you used ``sendmail
-C config -v -q'' it would choke on the -q because
the -C would stop looking for old-format arguments.
Portability fixes for:
SCO UNIX from Murray Kucherawy.
SCO Open Server 3.2v4 from Philippe Brand.
System V Release 4 from Rick Ellis and others.
OSF/1 from Steve Campbell.
DG/UX from Ben Mesander of the USGS and Bryan Curnutt
of Stoner Associates.
Motorola SysV88 from Kevin Johnson of Motorola.
Solaris 2.3 from Casper H.S. Dik of the University
of Amsterdam and John Caruso of University
of Maryland.
FreeBSD from Ollivier Robert.
NetBSD from Adam Glass.
TitanOS from Kate Hedstrom of Rutgers University.
Irix from Bryan Curnutt.
Dynix from Jim Davis of the University of Arizona.
RISC/os.
Linux from John Kennedy of California State University
at Chico.
Solaris 2.x from Tony Boner of the U.S. Air Force.
NEXTSTEP 3.x from Vince DeMarco.
HP-UX from various people. NOTA BENE: the location
of the config file has moved to /usr/lib
to match the HP-UX version of sendmail.
CONFIG: Don't do any recipient rewriting on relay mailer;
since this is intended only for internal use, the
usual RFC 821/822/1123 rules can be relaxed. The
main point of this is to avoid munging (ugh) UUCP
addresses when relaying internally.
CONFIG: fix typo in mailer/uucp.m4 that mutilates list:;
syntax addresses delivered via UUCP. Solution
provided by Peter Wemm.
CONFIG: fix thumb-fumble in default UUCP relaying in ruleset
zero; it caused double @ signs in addresses. From
Irving Reid of the University of Toronto.
CONFIG: Portability fixes for SCO Unix 3.2 with TCP/IP 1.2.1
from Markku Toijala of ICL Personal Systems Oy.
CONFIG: Add trailing "." on pseudo-domains for consistency;
this fixes a problem (noted by Al Whaley of Sunnyside)
that made it hard to recognize your own pseudodomain
names.
CONFIG: catch "@host" syntax errors (i.e., null local-parts)
rather than letting them get "local configuration
error"s. Problem noted by John Gardiner Myers.
CONFIG: add uucp-uudom mailer variant, based on code posted
by Spider Boardman <spider@Orb.Nashua.NH.US>; this
has uucp-dom semantics but old UUCP syntax. This
also permits "uucp-old" as an alias for "uucp" and
"uucp-new" as a synonym for "suucp" for consistency.
CONFIG: add POP mailer support (from Kimmo Suominen
<kim@grendel.lut.fi>).
CONFIG: drop CSNET_RELAY support -- CSNET is long gone.
CONFIG: fix bug caused with domain literal addresses (e.g.,
``[128.32.131.12]'') when FEATURE(allmasquerade)
was set; it would get an additional @masquerade.host
added to the address. Problem noted by Peter Wan
of Georgia Tech.
CONFIG: make sure that the local UUCP name is in $=w. From
Jim Murray of Stratus.
CONFIG: changes to UUCP rewriting to simulate IDA-style "V"
mailer flag. Briefly, if you are sending to host
"foo", then it rewrites "foo!...!baz" to "...!baz",
"foo!baz" remains "foo!baz", and anything else has
the local name prepended.
CONFIG: portability fixes for HP-UX.
DOC: several minor problems fixed in the Install & Op Guide.
MAKEMAP: fix core dump problem on lines that are too long or
which lack newline. From Mark Delany.
MAILSTATS: print sums of columns (total messages & kbytes
in and out of the system). From Tom Ferrin of UC
San Francisco Computer Graphics Lab.
SIGNIFICANT USER- OR SYSAD-VISIBLE CHANGES:
On HP-UX, /etc/sendmail.cf has been moved to
/usr/lib/sendmail.cf to match HP sendmail.
Permissions have been tightened up on world-writable
:include: files and accounts that have shells
that are not listed in /etc/shells. This may
cause some .forward files that have worked
before to start failing.
SIGUSR1 dumps some state to the log.
NEW FILES:
src/Makefile.DGUX
src/Makefile.Dynix
src/Makefile.FreeBSD
src/Makefile.Mach386
src/Makefile.NetBSD
src/Makefile.RISCos
src/Makefile.SCO
src/Makefile.SVR4
src/Makefile.Titan
cf/mailer/pop.m4
cf/ostype/bsdi1.0.m4
cf/ostype/dgux.m4
cf/ostype/dynix3.2.m4
cf/ostype/sco3.2.m4
makemap/Makefile.dist
praliases/Makefile.dist
8.6.4/8.6.4 93/10/31
Repair core-dump problem (write to read-only memory segment)
if you fall back to the return-to-Postmaster case in
savemail. Problem reported by Richard Liu.
Immediately diagnose bogus sender addresses in SMTP. This
makes quite certain that crackers can't use this
class of attack.
Reliability Fix: check return value from fclose() and fsync()
in a few critical places.
Minor problem in initsys() that reversed a condition for
redirecting the output channel on queue runs. It's
not clear this code even does anything. From Eric
Wassenaar of the Dutch National Institute for Nuclear
and High-Energy Physics.
Fix some problems that caused queue runs to do "too much work",
such as double-reading the Errors-To: header. From
Eric Wassenaar.
Error messages on writing the temporary file (including the
data file) were getting suppressed in SMTP -- this
fix causes them to be properly reported. From Eric
Wassenaar.
Some changes to support AF_UNIX sockets -- this will only
really become relevant in the next release, but some
people need it for local patches. From Michael
Corrigan of UC San Diego.
Use dynamically allocated memory (instead of static buffers)
for macros defined in initsys() and settime(); since
these can have different values depending on which
envelope they are in. From Eric Wassenaar.
Improve logging to show ctladdr on to= logging; this tells you
what uid/gid processes ran as.
Fix a problem that caused error messages to be discarded if
the sender address was unparseable for some reason;
this was supposed to fall back to the "return to
postmaster" case.
Improve aliaswait backoff algorithm.
Portability patches for Linux (8.6.3 required another header
file) (from Karl London) and SCO UNIX.
CONFIG: patch prog mailer to not strip host name off of envelope
addresses (so that it matches local again). From
Christopher Davis.
CONFIG: change uucp-dom mailer so that "<>" translates to $n;
this prevents uux from seeing lines with null names like
``From Sat Oct 30 14:55:31 1993''. From Motonori
Nakamura of Kyoto University.
CONFIG: handle <list:;> syntax correctly. This isn't legal, but
it shouldn't fail miserably. From Motonori Nakamura.
8.6.3/8.6.3 93/10/24
IMPORTANT FIX: Fix several problems that caused open files to
be "lost" during queue runs; this overflowed the open
file table on large runs. An assumption that fdopen
always succeeds sometimes resulted in core dumps when
this happens; sometimes the message is delivered twice,
sometimes (probably) infinite times. This problem in
various form was reported by P{r (Pell) Emanuelsson and
Robert Campbell of U.C. Berkeley.
Special diagnosis of EMFILE error conditions -- it now prints
the known open file descriptors so you can figure out
what is consuming so much resources.
Fix a couple of problems caused by early address parsing
errors -- one caused it to return a "this is only a
warning" when it really wasn't, and the other started
parsing through a random pointer. The first was
noted by Eric Wassenaar.
Fix an infinite loop problem caused by null components in the
host signature. Problem noted by Jan Sorensen.
Be sure to reset the "current date" when sending an error
message -- PostMasterCopy messages were being sent
with an old Date: header.
Fix a problem that caused duplicated mail when sendmail was
(1) compiled without HASFLOCK, (2) you are sending to
an alias that has an owner-* alias, (3) you execute
sendmail with -t flag, (4) you run in -odb mode, and
(5) the sender specifies both the alias name and
another alias [i.e., the envelope is split], then
duplicate messages are sent. The problem description
and one-line fix are from Motonori Nakamura of Kyoto
University.
Avoid a problem that causes error messages to be discarded
in some cases -- this was the result of a "fix" to
avoid duplicate error messages, but two are better
than zero. Reported by Tim Rylance.
Fix a minor botch in checkfd012() -- fix from Dave Hill of
Computervision R&D Ltd.
Remove "X-Authentication-Warning: <user> set sender to <address>
using -f" entirely -- it is far too eager to include
this, and it is confusing folks. I'll try to make it
work "right" in 8.7. Problem noted by Yoshitaka
Tokugawa of dit Co., Ltd.
Fix a race condition with the errno value in tick() and
reapchild() -- this caused occasional misdiagnosis
of problems. Kyle Jones of UUNET helped this along.
Repair rule loop-detection code. From Michael Corrigan of
U.C. San Diego.
Fix a problem that caused sender domain addition (C mailer
flag to be ignored if you use -odq or use -odb with
a high load average. Problem reported by Jim Murray
of Stratus.
Fix ident protocol on multi-homed machines. It was not
always using the correct interface. Fix from J.R.
Oldroyd of Opal.
Previously, sendmail assumed that any SMTP greeting message
that wasn't 2xx was a temporary failure -- it should
only take 4xx as a temporary failure, and return a
solid error message on anything else -- for example,
to allow you to reject connections on a workstation
that is MXed to a mail server.
Portability enhancements for 386BSD/FreeBSD/NetBSD from
Ollivier Robert.
CONFIG: FEATURE(always_add_domain) didn't always add the domain;
in particular, on local mail it modified the header sender
but not the header recipient address(es). Reported by
Jeffrey Honig of Cornell University. Also, strip
any host from envelope recipient address(es), since
local mailers don't understand host names -- this is
to help mailertable entries. From Christopher Davis.
CONFIG: masquerading didn't apply to addresses that already
had a domain. This change replaces a local hostname
by the masquerade name in the SMTP mailer (previously
it only added the masquerade name if it didn't already
have a domain name). Several people complained about
this.
8.6.2/8.6.2 93/10/15
Put a "successful delivery" message in the transcript for
addresses that get return-receipts.
Put a prominent "this is only a warning" message in warning
messages -- some people don't read carefully enough
and end up sending the message several times.
Include reason for temporary failure in the "warning" return
message. Currently, it just says "cannot send for
four hours".
Fix the "Original message received" time generated for
returntosender messages. It was previously listed as
the current time. Bug reported by Eric Hagberg of
Cornell University Medical College.
If there is an error when writing the body of a message,
don't send the trailing dot and wait for a response
in sender SMTP, as this could cause the connection to
hang up under some bizarre circumstances. From Eric
Wassenaar.
Fix some server SMTP synchronization problems caused when
connections fail during message collection. From
Eric Wassenaar.
Fix a problem that can cause srvrsmtp to reject mail if the
name server is down -- it accepts the RCPT but rejects
the DATA command. Problem reported by Jim Murray of
Stratus.
Fix a problem that can cause core dumps if the config file
incorrectly resolves to a null hostname. Reported by
Allan Johannesen of WPI.
Non-root use of -C flag, dangerous -f flags, and use of -oQ
by non-root users were not put into
X-Authentication-Warning:s as intended because the
config file hadn't set the PrivacyFlags yet. Fix
from Sven-Ove Westberg of the University of Lulea.
Under very odd circumstances, the alias file rebuild code
could get confused as to whether a database was
open or not.
Check "vendor code" on the end of V lines -- this is
intended to provide a hook for vendor-specific
configuration syntax. (This is a "new feature",
but I've made an exception to my rule in a belief
that this is a highly exceptional case.)
Portability fixes for DG/UX (from Douglas Anderson of NCSC),
SCO Unix (from Murray Kucherawy), A/UX, and OSF/1
(from Jon Forrest of UC Berkeley)
CONFIG: fix ``mailer:host'' form of UUCP relay naming.
8.6.1/8.6 93/10/08
Portability fixes for A/UX and Encore UMAX V.
Fix error message handling -- if you had a name server down
causing an error during parsing, that message was never
propogated to the queue file.
8.6/8.6 93/10/05
Configuration cleanup: make it easier to undo IDENTPROTO in
conf.h (other systems have the same bug).
If HASGETDTABLESIZE and _SC_OPEN_MAX are both defined, assume
getdtablesize() instead of sysconf(); a disturbingly
large number of systems defined _SC_OPEN_MAX in the
header files but don't have the syscall.
Another patch to really truly ignore MX records in getcanonname
if trymx == FALSE.
Fix problem that caused the "250 IAA25499 Message accepted for
delivery" message to be omitted if there was an error
in the header of the message (e.g., a bad Errors-To:
line). Pointed out by Michael Corrigan of UCSD.
Announce name of host we are chatting when we get errors; this
is an IDA-ism suggested by Christophe Wolfhugel.
Portability fixes for Alpha OSF/1 (from Anthony Baxter of the
Australian Artificial Intelligence Institute), SCO Unix
(from Murray Kucherawy of Hookup Communication Corp.),
NeXT (from Vince DeMarco and myself), Linux (from
Karl London <karl@borg.demon.co.uk>), BSDI (from
Christophe Wolfhugel, and SVR4 on Dell (from Kimmo
Suominen), AUX 3.0 on Macintosh, and ANSI C compilers.
Some changes to get around gcc optimizer bugs. From Takahiro
Kanbe.
Fix error recovery in queueup if another tf file of the same
name already exists. Problem stumbled over by Bill
Wisner of The Well.
Output YP_MASTER_NAME and YP_LAST_MODIFIED without null bytes.
Problem noted by Keith McMillan of Ameritech Services.
Deal with group permissions properly when opening .forward and
:include: files. This relaxes the 8.1C restrictions
slightly more. This includes proper setting of groups
when reading :include: files, allowing you to read some
files that you should be able to read but have previously
been denied unless you owned them or they had "other"
read permission.
Make certain that $j is in $=w (after the .cf is read) so that
if the user is forced to override some silly system,
MX suppression will still work.
Fix a couple of efficiency problems where newstr was double-
calling expensive routines. In at least one case, it
wasn't guaranteed that they would always return the
same result. Problem noted by Christophe Wolfhugel.
Fix null pointer dereference in putoutmsg -- only on an error
condition from a non-SMTP mailer. From Motonori
Nakamura.
Macro expand "C" line class definitions before scanning so that
"CX $Z" works.
Fix problem that caused error message to be sent while still
trying to send the original message if the connection
is closed during a DATA command after getting an error
on an RCPT command (pretty obscure). Problem reported
by John Myers of CMU.
Fix reply to NOOP to be 250 instead of 200 -- this is a long
term bug.
Fix a nasty bug causing core dumps when returning the "warning:
cannot deliver for N hours -- will keep trying" message;
it only occurred if you had PostMasterCopy set and
only on some architectures. Although sendmail would
keep trying, it would send error messages on each
queue interval. This is an important fix.
Allow u and g options to take user and group names respectively.
Don't do a chdir into the queue directory in -bt mode to make
ruleset testing a bit easier.
Don't allow users to turn off logging (using -oL) on the command
line -- command line can only raise, not lower, logging
level.
Set $u to the original recipient on the SMTP transaction or on
the command line. This is only done if there is exactly
one recipient. Technically, this does not meet the
specs, because it does not guarantee a domain on the
address.
Fix a problem that dumped error messages on bad addresses if
you used the -t flag. Problem noted by Josh Smith of
Harvey Mudd College.
Given an address such as ``<foo> <bar>'', auto-quote the first
``<foo>'' part, giving ``"<foo>" <bar>''. This is to
avoid the problem of people who use angle brackets in
their full name information.
Fix a null pointer dereference if you set option "l", have
an Errors-To: header in the message, and have Errors-To:
defined in the config file H lines. From J.R. Oldroyd.
Put YPCOMPAT on #ifdef NIS instead -- it's one less thing to get
wrong when compiling. Suggested by Rick McCarty of TI.
Fix a problem that could pass negative SIZE parameter if the
df file got lost; this would cause servers to always
give a temporary failure, making the problem even worse.
Problem noted by Allan Johannesen of WPI.
Add "ident" timeout (one of the "r" option selectors) for IDENT
protocol timeouts (30s default). Requested by Murray
Kucherawy of HookUp Communication Corp. to handle bogus
PC TCP/IP implementations.
Change $w default definition to be just the first component of
the domain name on config level 5. The $j macro defaults
to the FQDN; $m remains as before. This lets well-behaved
config files use any of the short, long, or subdomain
names.
Add makesendmail script in src to try to automate multi-architecture
builds. I know, this is sub-optimal, but it is still
helpful.
Fix very obscure race condition that can cause a queue run to
get a queue file for an already completed job. This
problem has existed for years. Problem noted by the
long suffering Allan Johannesen of WPI.
Fix a problem that caused the raw sender name to be passed to
udbsender instead of the canonified name -- this caused
it to sometimes miss records that it should have found.
Relax check of name on HELO packet so that a program using -bs
that claims to be itself works properly.
Restore rewriting of $: part of address through 2, R, 4 in
buildaddr -- this requires passing a lot of flags to get
it right. Unlike old versions, this ONLY rewrites
recipient addresses, not sender addresses.
Fix a bug that caused core dumps in config files that cannot
resolve /file/name style addresses. Fix from Jonathan
Kamens of OpenVision Technologies.
Fix problem with fcntl locking that can cause error returns to
be lost if the lock is lost; this required fully
queueing everything, dropping the envelope (so errors
would get returned), and then re-reading the queue from
scratch.
Fix a problem that caused aliases that redefine an otherwise
true address to still send to the original address
if and only if the alias failed in certain bizarre
ways (e.g, if they pointed at a list:; syntax address).
Problem pointed out by Jonathan Kamens.
Remove support for frozen configuration files. They caused
more trouble than it was worth.
Fix problem that can cause error messages to get ignored when
using both -odb and -t flags. Problem noted by Rob
McNicholas at U.C. Berkeley.
Include all "normal" variations on hostname in $=w. For example,
if the host name is vangogh.cs.berkeley.edu, $=w will
contain vangogh, vangogh.cs, and vangogh.cs.berkeley.edu.
Add "restrictqrun" privacy flag -- without this, anyone can run
the queue.
Reset SmtpPhase global on initial connection creation so that
messages don't come out with stale information.
Pass an "ext" argument to lockfile so that error/log messages
will properly reflect the true filename being locked.
Put all [...] address forms into $=w -- this eliminates the need
for MAXIPADDR in conf.h. Suggested by John Gardiner
Myers of CMU.
Fix a bug that can cause qf files to be left around even after
an SMTP RSET command. Problem and fix from Michael
Corrigan.
Don't send a PostMasterCopy to errors when the Precedence: is
negative. Error reports still go to the envelope
sender address.
Add LA_SHORT for load averages.
Lock sendmail.st file when posting statistics.
Add "SendBufSize" and "RcvBufSize" suboptions to "O" option to
set the size of the TCP send and receive buffers; if you
run over a slow slip line you may need to set these down
(although it would be better to fix the SLIP implementation
so that it's not necessary to recompile every program
that does bulk data transfer).
Allow null defaults on $( ... $) lookups. Problem reported by
Amir Plivatsky.
Diagnose crufty S and V config lines. This resulted from an
observation that some people were using the SITE macro
without the SITECONFIG macro first, which was causing
bogus config files that were not caught.
Fix makemap -f flag to turn off case folding (it was turning it
on instead). THIS IS A USER VISIBLE CHANGE!!!
Fix a problem that caused multiple error messages to be sent if
you used "sendmail -t -oem -odb", your system uses fcntl
locking, and one of the recipient addresses is unknown.
Reset uid earlier in include() so that recursive .forwards or
:include:s don't use the wrong uid.
If file descriptor 0, 1, or 2 was closed when sendmail was
called, the code to recover the descriptor was broken.
This sometimes (only sometimes) caused problems with the
alias file. Fix from Motonori Nakamura.
Fix a problem that caused aliaswait to go into infinite recursion
if the @:@ metasymbol wasn't found in the alias file.
Improve error message on newaliases if database files cannot be
opened or if running with no database format defined.
Do a better estimation of the size of error messages when NoReturn
is set. Problem noted by P{r (Pell) Emanuelsson.
Fix a problem causing the "c" option (don't connect to expensive
mailers) to be ignored in SMTP. Problem noted and the
solution suggested by Robert Elz of Munnari University.
Improve connection caching algorithm by passing "[host]" to
hostsignature, which strips the square brackets and
returns the real name. This allows mailertable entries
to match regular entries.
Re-enable Return-Receipt-To: -- people seem to want this stupid
feature, even if it doesn't work right.
Catch and log attempts to try the "wiz" command in server SMTP.
This also ups the log level from LOG_NOTICE to LOG_CRIT.
Be more generous at assigning $z to the home directory -- do this
for programs that are specified through a .forward file.
Fix from Andrew Chang of Sun Microsystems.
Always save a fatal error message in preference to a non-fatal
error message so that the "subject" line of return
messages is the best possible.
CONFIG: reduce the number of quotes needed to quote configuration
parameters with commas: two quotes should work now, e.g.,
define(ALIAS_FILE, ``/etc/aliases,/etc/aliases.local'').
CONFIG: class $=Z is a set of UUCP hosts that use uucp-dom
connections (domain-ized UUCP).
CONFIG: fix bug in default maps (-o must be before database file
name). Pointed out by Christophe Wolfhugel.
CONFIG: add FEATURE(nodns) to state that we are not relying on
DNS. This would presumably be used in UUCP islands.
CONFIG: add OSTYPE(nextstep) and OSTYPE(linux).
CONFIG: log $u in Received: line. This is in technical violation
of the standards, since it doesn't guarantee a domain
on the address.
CONFIG: don't assume "m" in local mailer flags -- this means that
if you redefine LOCAL_MAILER_FLAGS you will have to include
the "m" flag should you want it. Apparently some Solaris 2.2
installations can't handle multiple local recipients.
Problem noted by Josh Smith.
CONFIG: add confDOMAIN_NAME to set $j (if undefined, $j defaults).
CONFIG: change default version level from 4 to 5.
CONFIG: add FEATURE(nullclient) to create a config file that
forwards all mail to a hub without ever looking at the
addresses in any detail.
CONFIG: properly strip mailer: information off of relays when
used to change .BITNET form into %-hack form.
CONFIG: fix a problem that caused infinite loops if presented
with an address such as "!foo".
CONFIG: check for self literal (e.g., [128.32.131.12]) even if
the reverse "PTR" mapping is broken. There's a better
way to do this, but the change is fairly major and I
want to hold it for another release. Problem noted by
Bret Marquis.
8.5/8.5 93/07/23
Serious bug: if you used a command line recipient that was unknown
sendmail would not send a return message (it was treating
everything as though it had an SMTP-style client that
would do the return itself). Problem noted by Josh Smith.
Change "trymx" option in getcanonname() to ignore all MX data,
even during a T_ANY query. This actually didn't break
anything, because the only time you called getcanonname
with !trymx was if you already knew there were no MX
records, but it is somewhat cleaner. From Motonori
Nakamura.
Don't call getcanonname from getmxrr if you already know there
are no DNS records matching the name.
Fix a problem causing error messages to always include "The
original message was received ... from localhost".
The correct original host information is now included.
Previous change to cf/sh/makeinfo.sh doesn't port to Ultrix (their
version of "test" doesn't have the -x flag). Change it
to use -f instead. From John Myers.
CONFIG: 8.4 mistakenly set the default SMTP-style mailer to
esmtp -- it should be smtp.
CONFIG: send all relayed mail using confRELAY_MAILER (defaults
to "relay" (a variant of "smtp") if MAILER(smtp) is used,
else "suucp" if MAILER(uucp) is used, else "unknown");
this cleans up the configs somewhat. This fixes a serious
problem that caused route-addrs to get mistaken as relays,
pointed out by John Myers. WARNING: this also causes
the default on SMART_HOST to change from "suucp" to
"relay" if you have MAILER(smtp) specified.
8.4/8.4 93/07/22
Add option `w'. If you receive a message that comes to you because
you are the best (lowest preference) target of an MX, and
you haven't explicitly recognized the source MX host in
your .cf file, this option will cause you to try the target
host directly (as if there were no MX for it at all). If
`w' is not set, this case is a configuration error.
Beware: if `w' is set, senders may get bogus errors like
"message timed out" or "host unknown" for problems that
are really configuration errors. This option is
disrecommended, provided only for compatibility with
UIUC sendmail.
Fix a problem that caused the incoming socket to be left open
when sendmail forks after the DATA command. This caused
calling systems to wait in FIN_WAIT_2 state until the
entire list was processed and the child closed -- a
potentially prodigious amount of time. Problem noted
by Neil Rickert.
Fix problem (created in 6.64) that caused mail sent to multiple
addresses, one of which was a bad address, to completely
suppress the sending of the message. This changes
handling of EF_FATALERRS somewhat, and adds an
EF_GLOBALERRS flag. This also fixes a potential problem
with duplicate error messages if there is a syntax error
in the header of a message that isn't noticed until late
in processing. Original problem pointed out by Josh Smith
of Harvey Mudd College. This release includes quite a bit
of dickering with error handling (see below).
Back out SMTP transaction if MAIL gets nested 501 error. This
will only hurt already-broken software and should help
humans.
Fix a problem that broke aliases when neither NDBM nor NEWDB were
compiled in. It would never read the alias file.
Repair unbalanced `)' and `>' (the "open" versions are already
repaired).
Logging of "done" in dropenvelope() was incorrect: it would
log this even when the queue file still existed. Change
this to only log "done" (at log level 11) when the
queue file is actually removed. From John Myers.
Log "lost connection" in server SMTP at log level 20 if there
is no pending transaction. Some senders just close the
connection rather than sending QUIT.
Fix a bug causing getmxrr to add a dot to the end of unqualified
domains that do not have MX records -- this would cause
the subsequent host name lookup to fail. The problem
only occurred if you had FEATURE(nocanonify) set.
Problem noted by Rick McCarty of Texas Instruments.
Fix invocation of setvbuf when passed a -X flag -- I had
unwittingly used an ANSI C extension, and this caused
core dumps on some machines.
Diagnose self-destructive alias loops on RCPT as well as EXPN.
Previously it just gave an empty send queue, which
then gave either "Need RCPT (recipient)" at the DATA
(confusing, since you had given an RCPT command which
returned 250) or just dropped the email, depending on
whether you were running VERBose mode. Now it usually
diagnoses this case as "aliasing/forwarding loop broken".
Unfortunately, it still doesn't adequately diagnose
some true error conditions.
Add internal concept of "warning messages" using 6xx codes.
These are not reported only to Postmaster. Unbalanced
parens, brackets, and quotes are printed as 653 codes.
They are always mapped to 5xx codes before use in SMTP.
Clean up error messages to tell both the actual address that
failed and the alias they arose from. This makes it
somewhat easier to diagnose problems. Difficulty noted
by Motonori Nakamura.
Fix a problem that inappropriately added a ctladdr to addresses
that shouldn't have had one during a queue run. This
caused error messages to be handled differently during
a queue run than a direct run.
Don't print the qf name and line number if you get errors during
the direct run of the queue from srvrsmtp -- this was
just extra stuff for users to crawl through.
Put command line flags on second line of pid file so you can
auto-restart the daemon with all appropriate arguments.
Use "kill `head -1 /etc/sendmail.pid`" to stop the
daemon, and "eval `tail -1 /etc/sendmail.pid`" to
restart it.
Remove the ``setuid(getuid())'' in main -- this caused the
IDENT daemon to screw up. This required that I change
HASSETEUID to HASSETREUID and complicate the mode
changing somewhat because both Ultrix and SunOS seem
to have a bug causing seteuid() to set the saved uid
as well as the effective. The program test/t_setreuid.c
will test to see if your implementation of setreuid(2)
is appropriately functional.
The FallBackMX (option V) handling failed to properly identify
fallback to yourself -- most of the code was there,
but it wasn't being enabled. Problem noted by Murray
Kucherawy of the University of Waterloo.
Change :include: open timeout from ETIMEDOUT to an internal
code EOPENTIMEOUT; this avoids adding "during SmtpPhase
with CurHostName" in error messages, which can be
confusing. Reported by Jonathan Kamens of OpenVision
Technologies.
Back out setpgrp (setpgid on POSIX systems) call to reset the
process group id. The original fix was to get around
some problems with recalcitrant MUAs, but it breaks
any call from a shell that creates a process group id
different from the process id. I could try to fix
this by diddling the tty owner (using tcsetpgrp or
equivalent) but this is too likely to break other
things.
Portability changes:
Support -M as equivalent to -oM on Ultrix -- apparently
DECnet calls sendmail with -MrDECnet -Ms<HOST> -bs
instead of using standard flags. Oh joy. This
behaviour reported by Jon Giltner of University
of Colorado.
SGI IRIX -- this includes several changes that should
help other strict ANSI compilers.
SCO Unix -- from Murray Kucherawy of HookUp Communication
Corporation.
Solaris running the Sun C compiler (which despite the
documentation apparently doesn't define
__STDC__ by default).
ConvexOS from Eric Schnoebelen of Convex.
Sony NEWS workstations and Omron LUNA workstations from
Motonori Nakamura.
CONFIG: add confTRY_NULL_MX_LIST to set option `w'.
CONFIG: delete `C' and `e' from default SMTP mailers flags;
several people have made a good argument that this
creates more problems than it solves (although this
may prove painful in the short run).
CONFIG: generalize all the relays to accept a "mailer:host"
format.
CONFIG: move local processing in ruleset 0 into a new ruleset
98 (8 on old sendmail). Domain literal [a.b.c.d]
addresses are also passed through this ruleset.
CONFIG: if neither SMART_HOST nor MAILER(smtp) were defined,
internet-style addresses would "fall off the end" of
ruleset zero and be interpreted as local -- however,
the angle brackets confused the recursive call.
These are now diagnosed as "Unrecognized host name".
CONFIG: USENET rules weren't included in S0 because of a mistaken
ifdef(`_MAILER_USENET_') instead of
ifdef(`_MAILER_usenet_'). Problem found by Rein Tollevik
of SINTEF RUNIT, Oslo.
CONFIG: move up LOCAL_RULE_0 processing so that it happens very
early in ruleset 0; this allows .mc authors to bypass
things like the "short circuit" code for local addresses.
Prompted by a comment by Bill Wisner of The Well.
CONFIG: add confSMTP_MAILER to define the mailer used (smtp or
esmtp) to send SMTP mail. This allows you to default
to esmtp but use a mailertable or other override to
deal with broken servers. This logic was pointed out
to me by Bill Wisner. Ditto for confLOCAL_MAILER.
Changes to cf/sh/makeinfo.sh to make it portable to SVR4
environments. Ugly as sin.
8.3/8.3 93/07/13
Fix setuid problems introduced in 8.2 that caused messages
like "Cannot create qfXXXXXX: Invalid argument"
or "Cannot reopen dfXXXXXX: Permission denied". This
involved a new compile flag "HASSETEUID" that takes
the place of the old _POSIX_SAVED_IDS -- it turns out
that the POSIX interface is broken enough to break
some systems badly. This includes some fixes for
HP-UX. Also fixes problems where the real uid is
not reset properly on startup (from Neil Rickert).
Fix a problem that caused timed out messages to not report the
addresses that timed out. Error messages are also more
"user friendly".
Drop required bandwidth on connections from 64 bytes/sec to
16 bytes/sec.
Further Solaris portability changes -- doesn't require the BSD
compatibility library. This also adds a new
"HASGETDTABLESIZE" compile flag which can be used if
you want to use getdtablesize(2) instead of sysconf(2).
These are loosely based on changes from David Meyer at
University of Oregon. This now seems to work, at least
for quick test cases.
Fix a problem that can cause duplicate error messages to be
sent if you are in SMTP, you send to multiple addresses,
and at least one of those addresses is good and points
to an account that has a .forward file (whew!).
Fix a problem causing messages to be discarded if checkcompat()
returned EX_TEMPFAIL (because it didn't properly mark
the "to" address). Problem noted by John Myers.
Fix dfopen to return NULL if the open failed; I was depending
on fdopen(-1) returning NULL, which isn't the case. This
isn't serious, but does result in wierd error diagnoses.
From Michael Corrigan.
CONFIG: add UUCP_MAX_SIZE M4 macro to set the maximum size of
messages sent through UUCP-family mailers. Suggested
by Bill Wisner of The Well.
CONFIG: if both MAILER(uucp) and MAILER(smtp) are specified,
include a "uucp-dom" mailer that uses domain-style
addressing. Suggested by Bill Wisner.
CONFIG: Add LOCAL_SHELL_FLAGS and LOCAL_SHELL_ARGS to match
LOCAL_MAILER_FLAGS and LOCAL_MAILER_ARGS. Suggested by
Christophe Wolfhugel.
CONFIG: Add OSTYPE(aix3). From Christophe Wolfhugel.
8.2/8.2 93/07/11
Don't drop out on config file parse errors in -bt mode.
On older configuration files, assume option "l" (use Errors-To
header) for back compatibility. NOTE: this DOES NOT
imply an endorsement of the Errors-To: header in any way.
Accept -x flag on AIX-3 as well as OSF/1. Why, why, why???
Don't log errors on EHLO -- it isn't a "real" error for an old
SMTP server to give an error on this command, and
logging it in the transcript can be confusing. Fix
from Bill Wisner.
IRIX compatibility changes provided by Dan Rich
<drich@sandman.lerc.nasa.gov>.
Solaris 2 compatibility changes. Provided by Bob Cunningham
<bob@kahala.soest.hawaii.edu>, John Oleynick
<juo@klinzhai.rutgers.edu>
Debugging: -d17 was overloaded (hostsignature and usersmtp.c);
move usersmtp (smtpinit and smtpmailfrom) to -d18 to
match the other flags in that file.
Flush transcript before fork in mailfile(). From Eric Wassenaar.
Save h_errno in mci struct and improve error message display.
Changes from Eric Wassenaar.
Open /dev/null for the transcript if the create of the xf file
failed; this avoids at least one possible null pointer
reference in very wierd cases. From Eric Wassenaar.
Clean up statistics gathering; it was over-reporting because of
forks. From Eric Wassenaar.
Fix problem that causes old Return-Path: line to override new
Return-Path: line (conf.c needs H_FORCE to avoid
re-using old value). From Motonori Nakamura.
Fix broken -m flag in K definition -- even if -m (match only)
was specified, it would still replace the key with the
value. Noted by Rick McCarty of Texas Instruments.
If the name server timed out over several days, no "timed out"
message would ever be sent back. The timeout code
has been moved from markfailure() to dropenvelope()
so that all such failures should be diagnosted. Pointed
out by Christophe Wolfhugel and others.
Relax safefile() constraints: directories in an include or
forward path must be readable by self if the controlling
user owns the entry, readable by all otherwise (e.g.,
when reading your .forward file, you have to own and
have X permssion in it; everyone needs X permission in
the root and directories leading up to your home);
include files must be readable by anyone, but need not
be owned by you.
If _POSIX_SAVED_IDS is defined, setuid to the owner before
reading a .forward file; this gets around some problems
on NFS mounts if root permission is not exported and
the user's home directory isn't x'able.
Additional NeXT portability enhancements from Axel Zinser.
Additional HP-UX portability enhancements from Brian Bullen.
Add a timeout around SMTP message writes; this assumes you can
get throughput of at least 64 bytes/second. Note that
this does not impact the "datafinal" default, which
is separate; this is just intended to work around
network clogs that will occur before the final dot
is sent. From Eric Wassenaar.
Change map code to set the "include null" flag adaptively --
it initially tries both, but if it finds anything
matching without a null it never tries again with a
null and vice versa. If -N is specified, it never
tries without the null and creates new maps with a
null byte. If -O is specified, it never tries with
the null (for efficiency). If -N and -O are specified,
you get -NO (get it?) lookup at all, so this would
be a bad idea. If you don't specify either -N or -O,
it adapts.
Fix recognition of "same from address" so that MH submissions
will insert the appropriate full name information;
this used to work and got broken somewhere along the
way.
Some changes to eliminate some unnecessary SYSERRs in the
log. For example, if you lost a connection, don't
bother reporting that fact on the connection you lost.
Add some "extended debugging" flags to try to track down
why we get occassional problems with file descriptor
one being closed when execing a mailer; it seems to
only happen when there has been another error in the
same transaction. This requires XDEBUG, defined
by default in conf.h.
Add "-X filename" command line flag, which logs both sides of
all SMTP transactions. This is intended ONLY for
debugging bad implementations of other mailers; start
it up, send a message from a mailer that is failing,
and then kill it off and examine the indicated log.
This output is not intended to be particularly human
readable. This also adds the HASSETVBUF compile
flag, defaulted on if your compiler defines __STDC__.
CONFIG: change SMART_HOST to override an SMTP mailer. If you
have a local net that should get direct connects, you
will need to use LOCAL_NET_CONFIG to catch these hosts.
See cf/README for an example.
CONFIG: add LOCAL_MAILER_ARGS (default: `mail -d $u') to handle
sites that don't use the -d flag.
CONFIG: hide recipient addresses as well as sender addresses
behind $M if FEATURE(allmasquerade) is specified; this
has been requested by several people, but can break
local aliases. For example, if you mail to "localalias"
this will be rewritten as "localalias@masqueradehost";
although initial delivery will work, replies will be
broken. Use it sparingly.
CONFIG: add FEATURE(domaintable). This maps unqualified domains
to qualified domains in headers. I believe this is
largely equivalent to the IDA feature of the same name.
CONFIG: use $U as UUCP name instead of $k. This permits you
to override the "system name" as your UUCP name --
in particular, to use domain-ized UUCP names. From
Bill Wisner of The Well.
CONFIG: create new mailer "esmtp" that always tries EHLO
first. This is currently unused in the config files,
but could be used in a mailertable entry.
8.1C/8.1B 93/06/27
Serious security bug fix: it was possible to read any file on
the system, regardless of ownership and permissions.
If a subroutine returns a fully qualified address, return it
immediately instead of feeding it back into rewriting.
This fixes a problem with mailertable lookups.
CONFIG: fix some M4 frotz (concat => CONCAT)
8.1B/8.1A 93/06/12
Serious bug fix: pattern matching backup algorithm stepped by
two tokens in classes instead of one. Found by Claus
Assmann at University of Kiel, Germany.
8.1A/8.1A 93/06/08
Another mailertable fix....
8.1/8.1 93/06/07
4.4BSD freeze. No semantic changes.
6.65/6.34 93/06/06
Fix some lintish problems.
Fix some cases where server SMTP behaved poorly when handed bogus
input, pointed out by Eric Wassenaar.
CONFIG: fix some more (sigh) mailertable bugs -- thanks to
Motonori Nakamura of Kyoto University (again).
6.64/6.33 93/06/05
Don't send 050 (-v) information after the 250 response to a QUIT
command in srvrsmtp -- clients usually close the connection
at this point, and it causes bogus error messages.
Don't send messages that have errors on input (such as unbalanced
parentheses) during SMTP transactions, since a return
message has (probably) already been sent.
Give better diagnostics on timeouts during network reads, including
information similar to the SMTP phase.
Fix bug that caused SMTP messages to deliver synchronously; this
happened after the DATA 250, and hence caused reading the
next command to be delayed.
Ignore Errors-To: header unless 'l' (lower case el) header is
specified. The Errors-To: header violates RFC 1123.
Errors-To: was only needed to take the place of the
envelope sender in the days when most Unix mailers
didn't understand about the two kinds of senders.
Don't send warning messages in response to automatically generated
messages (that is, those From:<>).
CONFIG: fix some rather stupid typos in the mailertable code
pointed out by Motonori Nakamura of Kyoto University.
CONFIG: add confUSE_ERRORS_TO configuration option.
CONFIG: if ALWAYS_ADD_DOMAIN is selected, try to use $M
(masquerade name) instead of $j.
CONFIG: don't add dots to relay names (added in 6.29); it breaks
several things, and can be simulated by dot terminating
the names of relays. For example, use:
DBbit.net.relay.
(note the trailing dot).
6.63/6.32 93/06/01
Fix prototypes to eliminate chars in argument lists -- some
compilers are pissy about this.
Log protocol ($r) and body type if set so we can determine if
the adaptive algorithms are working.
Pessimize on locking of database files (particularly for NEWDB
databases) during opens. There were problems with
processes opening the file while it was rebuilt; since
NEWDB caches heavily, the reader opened an empty file,
which is an error. If your system has the ability to
lock atomically on open, this works properly; otherwise,
there are race conditions.
Check mod time on .pag file instead of .dir in NDBM aliases
because the .dir file doesn't get updated for small
alias files. From John Gardiner Myers of CMU.
More Solaris portability -- it now compiles on Solaris, but
hangs up in gethostbyname().
Move setting of RES_DEBUG flag before first myhostname() call
so we can see name server traffic on that call.
Fsync() queue files.
Fix a problem that causes -bi to try to rebuild maps other than
the alias file(s).
Fix a problem that caused udb to reject entries from any but
the first database listed.
Rearrange doc subdirectory for 4.4BSD release tape.
CONFIG: put $r into the Received line. This was an oversight.
CONFIG: fix typo (call to ruleset 99 should have been rulset 90).
CONFIG: move "auxiliary" subroutines to be in ruleset 90-99
range -- in the long run, single digit rulesets may
become reserved for builtin use by sendmail.
CONFIG: fix major problem that causes host aliases (that is,
anything in $=w != $j) to not be recognized. This has
been around since 6.30.
6.62/6.31 93/05/28
BETA RELEASE
Fix recursive syserr (if there is an error printing a syserr
message). This makes the code much less eager to consider
a write error as serious. This also includes some
heuristics to be clever about closed connections.
Lock NEWDB files during gets. This requires version 1.5 or later
of the db library. If you have an older version, you
can use -DOLD_NEWDB. This will go away in a few weeks.
Fix problem causing aliases that use host maps to get overwritten.
Do appropriate byte swapping on port numbers in ident protocol
code. Fix from Allan Johannesen of WPI.
Defer opening of map files to the same time as alias files so that
the daemon will tend to pick up new versions more promptly.
Prototype a bunch more functions.
Some Solaris 2.1 changes (still doesn't link though).
Try to simplify Makefiles by including more subordinate #defines
in conf.h (based on OS type).
CONFIG: check for domains if FEATURE(mailertable) is defined.
For example, if the host name is "knecht.cs.berkeley.edu"
it will search the following mailertable keys:
knecht.cs.berkeley.edu
.cs.berkeley.edu
.berkeley.edu
.edu
This could be used to replace the special relays for bitnet
and similar nets.
6.61/6.30 93/05/24
Fix problem that prevented appending dots on canonified host
names. This breaks tons of config files -- very
important fix.
Fix improper pointer dereference in response to HELO command.
Fix core dump if debugging set in map_rewrite.
CONFIG: add FEATURE(always_add_domain) to always attach the
local domain (only impacts local mail).
CONFIG: try to avoid turning names into $j -- although
technically a host can only have one "canonical name",
it seems to be common practice to have several.
6.60/6.29 93/05/22
Major change: merge alias databases with maps. This expands and
changes the map class interface but fixes a bunch of bugs.
The important user-visible change is that the file name
in a K line now does not include the ".db" extension; this
is added automatically. Also, the -d (NIS domain) flag is
missing from the K config line; use @domain instead.
When compiling, the *_MAP names are gone -- just compile
in NDBM, NEWDB, and/or NIS support.
Announce mailer/host/user triple on -bv flag -- from Brian
Bullen of Stirling University.
Don't send more than one line in response to HELO -- it confuses
Pony Express, which then behaves very badly. However,
this change does send two line 220 greetings, with the
second line reading "ESMTP spoken here". The usersmtp
module recognizes this and goes into ESMTP mode regardless
of the setting of the "a" mailer flag. Thus, "a" means
"always try EHLO".
AIX portability changes (thanks to Christophe Wolfhugel of
Herve Schauer Consultants (Paris) for providing me with
an INSA account for this purpose). Lightly tested. Use
-D_AIX3. This probably breaks compatibility with some
older systems (e.g., 4.2bsd) but still works on SunOS
4.1.2, Ultrix 4.2A, HP-UX 8.07, OSF/1 T1.3, and AIX 3.2.3.
Fix a problem causing an error message loop if the output channel
is hosed.
Add the Makefiles that I use for various environments -- some are
Berkeley make versions and some are old make versions.
My makefile for the NeXT box has gotten lost, alas!
PRALIASES: support for printing NEWDB databases. From
Michael J. Corrigan of U.C. San Diego.
CONFIG: don't pass pseudo-domains to $[ ... $] (if you have
a wildcard MX it can have wierd results). From
Christophe Wolfhugel.
CONFIG: dot terminate relay hostnames in S0. From Christophe
Wolfhugel.
6.59/6.28 93/05/13
Log version with SMTP daemon startup message.
Adjust setproctitle to work on NetBSD and BSD/386.
Fix null pointer reference in MX fallback code.
A bunch of minor fixes from Eric Wassenaar:
If deliver cannot execv the mailer, return EX_OSERR
instead of EX_TEMPFAIL (to give better
error messages).
Consistently malloc e_message.
Catch degenerate case of calling returntosender()
with an empty returnq.
MIME reformatting.
6.58/6.28 93/05/13
Fix bug that can cause incorrect verbose display of user smtp
messages.
Disable SMTP VERB command if PRIV_NOEXPN is set (since this
could reveal the same information.
Allow failure when reading SMTP greeting message to go on to
next MX host.
Add "MIME-Version: 1.0" header if using MIME (this was NOT
included in RFC 1344, but Bill King of Allan-Bradley
Company forwarded me email from Nathaniel Borenstein
claiming that it was an inadvertent omission).
Don't use Content-Type: X-message-header. According to John
Myers of CMU, many MIME readers will completely ignore
the data if they don't recognize it. Instead, just
add a blank line to make it a legal (empty) message.
Fix problem causing dots to keep getting appended to cached
hostnames. This can cause buffer overrun conditions.
The problem was found by Erik Forsberg of Retix,
although I used a different bug fix than he provided.
Fix parsing of split header/envelope rewriting specs -- from
Eric Forsberg.
Fix from Eric Wassenaar to correct To: lists in error messages.
6.57/6.28 93/05/11
Fix minor glitch causing extra ctladdrs to be output to queue
file. Just an annoyance.
Cache results of name server canonification lookups to avoid
backed up queue runs.
Major rewrite of alias.c: considerable cleanup, plus sample
(untested) support for NIS aliases. The "A" option
can now be a comma separated list (or be repeated) --
that is, you can have multiple alias databases. Each
database can have the syntax ``class:file''; if no class
is specified, the "implicit" class is assumed. Implicit
searches through a list of compiled in types -- hash,
dbm, nis, and stab. Alias files are searched in the
order they are listed. For example:
OAhash:/etc/aliases.local,/etc/aliases
OAnis:mail.aliases@my.nis.domain
first searches the hash database /etc/aliases.local,
then the regular /etc/aliases database, then the NIS
map "mail.aliases" in the NIS domain "my.nis.domain".
If in Verbose mode (probably from VERB command) run SMTP job
in foreground and don't do RCPT optimizations.
Add udb :mailsender as equivalent to owner- for regular aliases.
Delete option 8; add option 7 that means the opposite. That is,
default to 8-bit mode; a special option is needed to
force sendmail into 7 bit mode.
Send error messages in encapsulated MIME format.
New compile flag "NIS" that turns on NIS alias and NIS map
support.
Add "j" option to send error messages in MIME (RFC 1341)
encapsulated message format per RFC 1344. The
syntax is pretty ugly if you don't have MIME-aware
user agents.
Clean up message handling (for display in mailq output).
New setproctitle implementation for 4.4bsd.
Create files (such as ~/dead.letter) using mode FileMode (the
F option value) instead of 0666.
Fix bug causing output of EXPN command to not be fully qualified.
This may cause some problems with UUCP addresses that
will require some config file assistance -- specifically,
the $: part has to include the host name for this output
to make sense.
Fix a problem that sometimes diagnosed errors and still sent the
message if the header syntax was bad.
Fix a bug that caused an error message to be emailed when sendmail
was operating in -bv mode.
Add "ListenQueueSize" keyword to daemon options option (OO) to
set the queue size parameter passed to listen(). You
will normally have to tweak your kernel to up this.
Strip spaces off of beginning of message-id before logging (in
case it was folded across lines).
Tweak compile flags in daemon.c -- there were some cases where
it wouldn't work without NETINET.
Change *file* mailer to output all the usual default headers
(From, Date, Message-Id). It gets used when sending
back error messages.
CONFIG: explicitly catch and diagnose list:; syntax in ruleset
zero -- this is not a valid recipient syntax according
to RFC 821.
CONFIG: add confMIME_FORMAT_ERRORS to send error messages in
MIME format. Defaults to on.
CONFIG: add SMTP_MAILER_FLAGS and UUCP_MAILER_FLAGS to augment
the flags for those mailers.
6.56/6.27 93/05/01
Fix problem that causes the fallback mail to postmaster
(case ESM_POSTMASTER in savemail()) to not look at
aliases (ugh).
Some more HPUX tweaking (compile flag hpux => __hpux so it
still works in ANSI mode).
Don't try to flock non-regular files when mailing to a file.
In particular, this was a problem if you tried to
send to /dev/null.
Fix a wierd bug that can cause senders to be queued as
recipients if the name server is down when the mail
is initially sent. This hack just ignores sender
deletion (essentially, it sets the MeToo flag) if there
is a TEMPFAIL during processing of the sender address.
Obscure.
Fix a dangling else problem -- from Brian Bullen from University
of Stirling, UK.
Add the "b" mailer flag to force a blank line on the end of
messages. Some brilliant versions of /bin/mail insist
on this but do not add it themselves.
Add the "g" mailer flag to prevent user SMTP from sending
"MAIL From:<>". This is only intended to be a
transitional gesture, and should not be used if at
all possible. It appears that Berkeley and IDA
config files have always handled this properly; the
UK config kit apparently does not.
Don't lowercase and then capitalize header field names -- leave
them with original capitalization. Fixes from Bill
King of Allen-Bradley Company.
Further cleanup and improved reporting of error messages,
particularly conditions that cause messages to be
requeued for future delivery.
Tweak syslog priorities in some cases.
CONFIG: clean up route-addr on UUCP addresses.
6.55/6.25 93/04/27
HPUX 8.07 compatibility changes in getla() -- I had to make
these changes to get it to work at Berkeley, although
others seem to have been working before (???).
Various patches to XLA code.
Fix problem that causes setuid bit on files to be ignored from
SMTP or in queue runs. Problem noted by Jason Ornstein
of Under The Wire, Inc.
Fix problem that can cause CNAMEs to be ignored.
Generalize getmxrr to match local host in $=w instead of a
single name passed in.
Some cleanup from Eric Wassenaar:
Use FileMailer instead of ProgMailer in two places.
Eliminate duplicate 8th-bit stripping in commaize.
Fix a problem with mis-parsing of backslash escapes
under some circumstances.
NIS map fix (was always including trailing null character)
from Mike Glendinning of Ingres UK.
Add "a" mailer flag to try using ESMTP. It tries the EHLO
command and if that fails falls back to regular SMTP.
Also parses EHLO option keywords. If host supports
SIZE extension, this is added to the MAIL FROM:
command.
Extend "b" option to include a second value which is the
maximum message size this server is willing to accept.
For example, a value of "10/1000000" says that there
must be ten blocks free, and sendmail will reject
any message larger than one megabyte.
Some portability hooks for NeXT (this could be applicable
to Mach in general). You have to create an empty
file called "unistd.h" to get it to compile.
Adjust config values (MAXLINE, MAXATOM, and PSBUFSIZE) to
be more generous.
Add X400-Received: to the list of headers tagged with H_TRACE
in conf.c. From Bill King, Allen-Bradley Co.
6.54/6.25 93/04/19
Fix problem that caused redefinition of SMTP and QUEUE compile
flags. Pointed out by Jon Forrest of the Sequoia 2000
project at Berkeley.
Properly handle \! hack -- it was treating host\!user as one
token (host!user) instead of three (host, !, user).
Fix from Eric Wassenaar of NIKHEF-H.
Fix compilation problem in getauthinfo() if IDENTPROTO is off.
Turn off DEFNAMES and DNSRCH when getting the hostsignature
(i.e., MX records) in level 1 configuration files; this
matches the old behaviour. From Motonori Nakamura of
Kyoto University.
Improve error message printing -- if sent through an alias,
error messages include the name of the alias in the
message. Unfortunately, in order to make this work
properly in queue runs, this changes the format of the
C line in the qf file. The relatively uselessness of
the previous information was pointed out to me by
Allan E Johannesen of WPI.
Add XLA compile flag to add hooks to Christophe Wolfhugel's
extended load average code. This is still in very early
form. For information regarding the guts of the xla
code, contact Christophe.Wolfhugel@grasp.insa-lyon.fr.
Additional hooks for detecting tempfails in rewriting rules
(that is, in map lookups).
6.53/6.25 93/04/15
Properly diagnose ruleset zero returning null (instead of a mailer
triple). From Motonori Nakamura of Kyoto University.
More generalization of socket code for other protocols.
Shorten timeouts on reverse name lookups -- since they are done
during connection establishment, long timeouts here can
cause higher level timeouts. This mainly serves to accept
mail from hosts that do not have proper reverse (PTR) DNS
records set up.
Reset e_statmsg before each mailer invocation to avoid bogus
messages in the log.
Redefine $r, $s, and $_ in error envelopes so you don't get
incorrect cruft in the error message. Problem noted by
Motonori Nakamura of Kyoto University.
Fix a problem that can cause failure to return errors to Postmaster
in certain cases. From Motonori Nakamura.
Fix a problem that can cause some systems to give duplicate error
messages when a bad syntax address such as "<a" is presented
to an SMTP server. It doesn't seem to occur on all
machines. From Motonori Nakamura.
Default IDENTPROTO off for Ultrix and HPUX, which apparently have
the interesting "feature" that when they receive a "Host
unreachable" message they closes all open connections to
that host. However, some firewall gateways send this message
if you try to connect to an unauthorized port, such as the
IDENT port (113). Thus, no email can be received from such
hosts. There is some evidence that versions of Ultrix before
4.3 do not have this problem. Thanks to Tom Ivar Helbekkmo
for pointing out this behaviour to me and to Michael Corrigan
of U.C. San Diego for informing me about the HPUX problem.
Allow IPC mailers to return a colon-separated list of hosts in the
$@ clause; these are searched in order as though they were
MX records.
When sending an error report, print the list of addresses tagged
as bad. Requested by Allan E Johannesen of WPI.
Change map function calls to return a status code. This gets
passed back as the result of rewrite. Parseaddr marks
the address as a QUEUEUP address if the return code is
EX_TEMPFAIL. All this to queue properly if the name
server is down. This code is not well tested. This code
changes the interface to map lookup functions (a fifth
parameter, int *statp, is added). Feature requested by
Dan Oscarsson.
Don't delete quotes (in the dequote map) if there are spaces in
the string, since this would cause them to be replaced by
the SpaceSub character.
Accept BODY=8BITMIME on SMTP MAIL command. This isn't advertised
because the 8BIT to 7BIT translation doesn't exist yet.
This does add a "bodytype" field to both envelope and
queue file and a -B command line flag to pass the type in
during direct invocations.
Discard return error messages only on responses to responses to
responses, not on responses to responses. That is, the
algorithm is to try return to sender, then return to
postmaster, then discard. Previously it discarded
immediately if the return to sender pass failed.
CONFIG: back out change to hide unqualified hostnames behind %-hack.
This screws up local aliases and .forward files.
CONFIG: add FEATURE(nocanonify) to turn off calls to $[ ... $];
some sites only handle completely canonified names.
Requested by John Gardiner Myers of CMU.
CONFIG: some UUCP code was still included even if FEATURE(nouucp)
was specified.
6.52/6.24 93/04/10
Clean up some minor glitches on error return messages pointed out
by Motonori Nakamura of Kyoto University.
Fix reply() to not reset SmtpReplyBuffer on fatal errors; this
was supposed to reset SmtpMsg Buffer. This makes the
client side code virtually useless. Reported by Allan
E Johannesen of WPI and Phil Brandenberger of Swarthmore.
Better debug messages if fuzzy is disabled, suggested by Allan
E Johannesen of WPI.
Offset SmtpReplyBuffer by four in usersmtp when checking for
loopback. From Eric Wassenaar.
Don't set $s until after runinchild in srvrsmtp -- otherwise
it gets cleared. From Eric Wassenaar.
Implement IDA-style $&x for deferred macro expansion.
More POSIX compatibility.
CONFIG: Hide unqualified hostnames behind %-hack using $s as the
actual sender. This is only done if $r is non-null, that
is, if this is not locally submitted mail.
CONFIG: Add FEATURE(bitdomain) allowing mapping of BITNET host
names to internet domains. A program contributed by
John Gardiner Myers of CMU to create the maps is included
in the contrib directory (in the "misc" tar file).
CONFIG: Add FEATURE(uucpdomain) for a similar mapping for UUCP
hosts. There is currently no tool to create this map.
6.51/6.23 93/04/04
Add D= mailer flag to specify a path of possible working directories
in which to execute the mailer. This is intended for the
prog mailer; some shells can get upset if they don't have
access to the current directory.
Add RFC 1413 (IDENT) protocol support. This is only very loosely
tested. This adds a $_ macro to be the authenticated
info (in ``user@domain [address]'' form) and debug flag
9 to trace the protocol.
Check for loopbacks in usersmtp instead of srvrsmtp -- there is no
reason for a local agent to not be talking to the localhost
(although the inverse is not true).
Add a few hooks for automated map rebuilding. This is certainly
not done yet.
CONFIG: Have prog mailer specify a path of ``D=$z:/'' -- that is,
user's home directory then the root.
CONFIG: Log RFC 1413 identification in Received: line.
6.50/6.22 93/04/01
Fixes to requeueing code to make it compute priority, nrcpts,
and the like properly.
6.49/6.22 93/04/01
Diagnose incorrect privacy flags. Suggested by Bryan Costales
of ICSI.
Some ANSI C fixes.
Arrange to quote backslashes as well as other special characters
in the phrase part of a route-addr.
Some fixes to FallBackMX code suggested by Motonori Nakamura of
Kyoto University.
More vigorous zeroing of CurHostAddr to avoid logging of bogus
host addresses when you are actually just printing
information from the MCI structure; problem noted by
Michael Corrigan of U.C. San Diego.
Don't ignore rest of queue if any job is not runnable. This can
also cause an incorrect job to be lost. Fix from
Eric Wassenaar.
Always respond "quickly" to RCPT command; do alias expansion and
the like later. This also means that mail for lists that
have errors will be acccepted, and an error sent back
later. This is done by instantiating the queue file
and then immediately running and requeueing it.
6.48/6.22 93/03/30
Fix incorrect diagnosis of infinite loop in ruleset. Problem noted
by several people.
Improve information printed when infinite loops are discovered.
Zero CurHostAddr to fix erroneous internet addresses in log when no
addresses can be bound. Pointed out by Motonori Nakamura
of Kyoto University.
"Probe" SMTP connections using RSET instead of NOOP "just in case".
Suggested by John Gardiner Myers of CMU.
Don't warn about -f if you are setting sender to yourself.
6.47/6.22 93/03/29
Fix incompatible call to endmailer in smtpquit which causes core
dumps. Noted by Allan E Johannesen of WPI.
HPUX portability changes from Michael J. Corrigan of UC San Diego.
Require MAIL before RCPT command in srvrsmtp.c. This had been
intentional from the 821 draft days when the order wasn't
clear, but is silly now.
Fix bug in nis_magic routine that was initializing parameters
incorrectly. Fix from Takahiro Kanbe of Fuji Xerox
Information Systems Co., Ltd.
Change default for PrivacyFlags in conf.c to 0 -- since it always
"or"s in new values, there was no way to turn off the
AuthWarning stuff.
Add O option to set SMTP daemon options.
Add V option to set fallback MX host. This always sorts at lower
priority than anything it gets from the name server. It
should only be used for environments with very bad network
connectivity. Requested by several people.
Log sending info. It's not clear this is a good idea.
CONFIG: fix typo in mailertable code. Noted by Phil Brandenberger
of Swarthmore.
CONFIG: add confDAEMON_OPTIONS and confFALLBACK_MX to set options
O and V, respectively.
6.46/6.21 93/03/26
Fix botch in server SMTP that broke transactions that did not
use HELO first (like MH). Fix from Michael Corrigan
of U.C. San Diego.
Fall back to other MX records if there is an error anywhere
in delivery (actually on MAIL or DATA -- RCPT is harder).
Suggested by John Gardiner Myers and Motonori Nakamura.
Revert to non-prototypes -- it turns out that our ANSI C
compiler is more forgiving than most others about
mixing prototyped extern declarations with non-prototyped
function definitions.
Fix a problem with multi-word class matching pointed out by
Neil Rickert. Given:
CX b a.b.c
R$+ $=X $+ $: $1 < $2 > $3
the input "user@a.b.c" failed instead of being properly
rewritten as "user@a.<b>.c".
Neil also convinced me that it was correct that $~ should match
only one token -- the problem is that it's always possible
to add another token, so $~ matches far too eagerly.
6.45/6.21 93/03/25
Implement multi-word classes (properly!).
6.44/6.21 93/03/25
Add X-Authentication-Warning: headers to clue users into possible
attempts to forge mail. This is on the authwarnings
privacy flag, but is the default. Suggested by Bryan
Costales of ICSI.
Pass default units for convtime in so they can be more reasonable.
Allow config files to always add a new Comments: header (i.e.,
they will be added even if an old one already exists).
Suggested by Bryan Costales of ICSI.
Allow config files to delete an existing Return-Path: header.
These should only be added at final delivery. Suggested
by Bryan Costales of ICSI.
Some debugging additions. Suggested by Bryan Costales of ICSI.
Clean up logging of Family 0 addresses. Noted by David Muir
Sharnoff and others.
Add a "dequote" map class. This allows config files to strip
quotes off of addresses. Note that this is not a builtin
map, just a class -- so you have to define the map
using the K line.
Fix a bug in the queueup() loop getting a locked tf where in
very odd cases it can fall off the bottom and core dump.
Of course, it was P{r Emanuelsson who found it....
Open a new transcript when splitting an envelope. Problem found
by Allan E Johannesen of WPI.
Improved error output in endmailer if the mailer core dumps.
CONFIG: Fix typo in UUCP mailer definition.
CONFIG: Default several of the new options on: eight bit input,
privacy flags set to "authwarnings", and message warning
set to 4h.
CONFIG: Use dequote map.
6.43/6.20 93/03/23
Fix problem with assumption of an sa_len field in a generic
sockaddr -- it turns out that most vendors haven't
picked up this (very important) fix.
Change compilation flags for daemon code -- select one or both
of NETINET or NETISO, but don't ever set DAEMON manually.
CONFIG: add FEATURE(mailertable) to do IDA-style mailertables.
6.42/6.19 93/03/19
Use Postmaster as default fallback return address, not root.
POSIX changes for file descriptor handling.
Diagnose errors writing new queue file.
If you change the owner using an owner- alias, also change the
error mode to EM_MAIL so that errors don't get dropped
into an inappropriate directory. Problem noted by
Allan E Johannesen of WPI.
If you are su'ed to root, send email as who you really are, not
as root. From Brian Kantor of U.C. San Diego.
Allow warning messages to be sent after a configurable interval
has passed without delivery. The message is sent only
once per envelope. This changes the format of the qf
file to have an F line, and the format of the T option
to accept take the format "return/warn" (both intervals).
Don't force all local names to lower case -- this was left over
from the wierd handling of case mapping on aliases. It
is now driven (as expected) by the "u" mailer flag.
Problem noted by P{r Emanuelsson.
Fix problem that caused headers on returned email to be trashed;
they were getting freed, but are still accessible via
BlankEnvelope.
Fix problem that caused bogus ids to be created on returned
mail.
Add support for ISO and other non-INET networking. This is by
no means finished yet. This does assume a lot of other
system support, like a version of gethostbyname that
returns non-AF_INET addresses.
CONFIG: change default on prog mailer to keep upper case in
user names (i.e., in the program command line).
CONFIG: strip trailing dots off of hosts in uucp mailer before
convert to bang format.
CONFIG: create new "relay" mailer for $R (LOCAL_RELAY) and $H
(MAIL_HUB) delivery that doesn't add local domain. Note
that this violates 821, but is probably "more correct"
for what we are trying to do. Problem pointed out by
Michael Graff of Iowa State.
6.41/6.18 93/03/18
Clean up unnecessary creates of queue ids (i.e., empty qf files)
when not needed, such as when starting up an SMTP
connection.
Fix problem where split envelopes aren't instantiated in the queue.
This is quite a serious bug.
Owner- aliases had problems with leading spaces causing a
premature delimitation.
6.40/6.18 93/03/18
Have ending 250 (after DATA) include the id; suggested by
Brian Kantor of UC San Diego.
Add logging on envelope splitting.
Change queue ids to have one more letter encoding the hour of
the day so that during a single day there is a greater
likelihood of uniqueness; requested by Brian Kantor.
6.39/6.18 93/03/18
Fix minor compile problem if LOCKF is defined.
Define size of tobuf in conf.h. Observed by Toshinari Takahashi
of Toshiba.
Restore e_sender -- this is equivalent to e_from.q_paddr without
decorations such as angle brackets and comments.
OSF/1 on Alpha changes from Allan E Johannesen of WPI.
CONFIG: fix typo in S3 for list syntax (;: => :;). Thanks to
Christopher Hoover for noting the problem.
6.38/6.17 93/03/17
Pass envelope to disconnect to avoid another use of CurEnv, which
can apparently end up being null at inopportune times.
Log "received from" as "relay=" for consistency (suggested by
John Gardiner Myers).
Fix major bug in header handling: if no From: line existed in
the header (so sendmail inserts one), and the sender is
an alias that has an owner, the From: line shows the
owner (as well as the envelope). Fixed by early binding
the headers (which will change debugging output).
HPUX portability patches from Michael J. Corrigan of UC San Diego.
Some attempts to adapt better to out of open file conditions.
Some changes to ctladdr handling in queue files.
6.37/6.17 93/03/16
MAJOR CHANGE: delete e_sender and e_returnpath (why are these
different from e_from?) and $< macro.
Log correct IP address in relay= field even if the connection
times out.
Log "received from [RESPONSE]" on EF_RESPONSE messages (from
John Gardiner Myers).
Fixes to SysExMsg logging (sometimes just got "message: %s"
instead of "message: error message"), noted by Eric
Wassenaar. Also reported by Motonori Nakamura.
Improvements to MX piggybacking code, from Motonori Nakamura.
Fix case where CurHostName points to an auto variable that has
been deallocated (from Motonori Nakamura).
Fix bug causing newlines to be included in aliases if option
"n" (check alias RHS) is set; bug noted by David Muir
Sharnoff.
Fix problem causing user names that should be mapped to lower
case to not be mapped if they are sent during a queue
run. This greatly simplifies the case mapping code.
Problem noted by Allan E Johannesen of WPI.
Don't do recipient address rewriting in buildaddr. This
improperly did recipient rewriting on sender addresses,
and just seems bogus in general -- but the change could
break some .cf files.
Pass TZ envariable to child processes for System V.
CONFIG: allow LOCAL_RULE_1 and LOCAL_RULE_2 if you want to
define those rulesets.
KNOWN PROBLEM: I have seen some problems on SunOS that causes
the User Data Base to give errors on some addresses. I
have tracked the problem back at least as far as 93.02.15
(version 6.22). Running with debugging on makes it
go away, so I conclude that it is referencing uninitialized
stack data. I haven't been able to track this down yet.
6.36/6.16 93/03/08
Allow local mailer to specify $@host -- this lets you assign the
"foo" part of jgm+foo to $h for passing in to the local
mailer.
Additional debug printing in getcanonname (show query type).
Don't add the e_fromdomain on sender addresses -- this interacts
wierdly with the owner- code.
Improve delivery logging to not log obvious or meaningless stuff.
Include numeric IP address in Received: lines per RFC 1123 section
5.2.8.
Fixed a bug in checking stat() return value if restrictmailq is
set. Also, check the entire group set instead of just the
primary group. Both from John Gardiner Myers.
Don't have usrerr automatically print errno, since this is often
misleading.
Use transienterror() in makeconnection after connect() fails and
in openmailer after execve() fails (from Eric Wassenaar).
Also moved transienterror() from util.c to conf.c.
Clean up from= logging on response messages.
Undo patch allowing prescan to return a null vector -- it breaks
too many things.
Config: FEATURE(notsticky) lets you use UDB for everything coming
in to the machine, even if it is specifically targetted
to this machine. Without it, UDB is bypassed if the user
name is fully qualified.
Config: fix another minor botch with <> (local mailer wasn't
mapping them properly).
6.35/6.15 93/03/05
Fix getrealhostname to return null if sinlen <= 0 -- this can
occur if stdin is a pipe.
Avoid infinite loop in getcanonname if name server return
NO_DATA (for example).
Config: avoid having C flag qualify list syntax and error syntax.
6.34/6.14 93/03/05
Fix logging in deliver to not pass too many parameters to Ultrix
versions of syslog.
Don't write the pid file until after the daemon has actually
opened and conditioned the connection.
Consider addresses "different" if their q_uids differ (so that
two users forwarding to the same program will be seen
as different, rather than the same).
Fix problem with bad parameters in main() -- they set ExitStat
but don't exit.
Fix null pointer references through RealHostName -- painfully
discovered by Allan E Johannesen of WPI.
Fix bug causing user@@localhost to core dump (yuch).
Config: don't put two @host.dom.ain on users in $=E in SMTP
mailer. Also, catch user@ (no host) in ruleset 0.
6.33/6.13 93/03/03
Config: add confCW_FILE as the name of the cw configuration file
(defaults to /etc/sendmail.cw). From P{r Emanuelsson.
Allow prescan to return a pointer to an empty list -- this is
not an error. Also, clean up error reporting to avoid
double errors (prescan reports once, then the caller
reports again).
Changes to avoid trusting T_ANY queries -- run them, but if you
don't get the info you expected, do T_A and T_MX queries
anyhow. This also fixes an oversight where _res.options
bits were being ignored.
If PRIV_NOVRFY is set, use 252 response code instead of 502 per
RFC 1123 section 5.2.3. It's not 100% clear that this
is correct, but it probably works better with stupid
mailers that do a VRFY and only check the first digit.
6.32/6.12 93/03/02
Fix uninitialized variable "protocol" in smtp code.
Include <unistd.h> in sendmail.h -- move towards POSIX/ANSI.
Additional hooks for RFC 1427 (ESMTP SIZE extension). This
includes requiring that enoughspace() know the system
block size, which will undoubtedly break most ports.
Trace flag 19 in use for srvrsmtp.c.
Additional logging -- notably the sending mailer name. This
also changes the delivery logging to strict field=value
syntax.
Fix some problems with messages getting sent even to addresses
that had been marked bad -- from Eric Wassenaar.
More WIDE changes: accept host name inside [...] as non-MXed
host. This is intended ONLY for use inside firewalled
environments, where the MX points at the gateway.
Change .cf file conventions so that mapping for <> addresses
don't have an @ in them (to avoid confusing the C mailer
flag). Pointed out by Neil Rickert.
Config extensions for Sam Leffler's FlexFAX software.
6.31/6.10 93/02/28
Fix some more bugs in alias owner code -- there were some wierd
cases where an error in a non-aliased name would override
the return info in an aliased name with an owner.
Changes from WIDE Project, forwarded to me by Motonori Nakamura:
Log actual delivery host (after MX et al); from
yasuhiro@dcl.co.jp.
Log daemon startup.
Deliver Postmaster copies without a body.
Better logging of SMTP senders.
Send all program email as daemon even when local.
As requested in various forms from many people, accept -qIstring
to limit queue runs to jobs with queue-id matching string.
Similarly for -qRstring for recipients, -qSstring for
senders.
Initial hooks for ESMTP support (see RFC 1425).
Fixed a syntax error in the UUCP mailer specification that caused
core dumps on startup.
Check for missing A= or P= arguments in mailer definitions.
6.30/6.10 93/02/27
Require FROZENCONFIG compilation flag to include frozen
configuration code. Frozen configuration is really
not a very good idea any more, particularly in shared
library environments.
Do better checking of errno after opens of :include: and .forward
files to defer delivery on network and other transient
errors. Suggestion from Craig Everhart.
Fix minor botch in read timeout macro processing.
Add FEATURE(nouucp) to config files for sites that know absolutely
nothing about UUCP.
Add built cf files to distribution tape and clarify how to build
them if you don't have the Berkeley make.
Some sizeof(long) portability changes for the Alpha, from Allan
E Johannesen.
Add "restrictmailq" privacy flag -- if set, only people in the same
group as your queue directory can print the queue. If you
set this, be sure you also restrict access to log files....
Fix another bug in owner-list stuff that can cause data files to
be "lost".
Fix a bug with queue runs that cause forwards to yourself to go
into alias/forwarding loops. I'm still iffy about this
fix.
Fix from Eric Wassenaar for suppression of return message code.
6.29/6.9 93/02/24
Fix yet another problem in alias owner code -- put the wrong return
address on the enclosed return-to-sender letter.
6.28/6.9 93/02/24
Fix botch in alias owner code that caused it to not operate if the
error was detected locally.
6.27/6.9 93/02/24
M_LOCAL => M_LOCALMAILER to avoid conflict with Ultrix include
file <sys/mount.h>.
Miscellaneous bug fixes from Eric Wassenaar:
sendmail -bv -t logs the from line even though in verify
mode only.
sendmail -v can go into queue mode if shouldqueue returns
TRUE.
Add route-addr pruning per RFC 1123 section 5.3.3. This can be
disabled using the "R" option.
Delete (always undocumented) -R flag (save original recipients);
there are ways to syslog(3) these now.
Clean up SMTP reply codes -- specify them as needed in the code,
instead of in conf.c -- this was needed during the NCP to
TCP transition, but seems silly now. This also changes
parameters to message and nmessage.
Have mailstats read the .cf file to find the sendmail.st file and
get text versions of mailer names. An initial version of
this code was provided by Tuominen Keijo (although the
comments indicate the good bits were written by "E.V.").
Add yet more System V compatibility hacks.
Fix bug in VRFY code (assumes everything must be a local user).
Allow specification of any of the hard-wired pathnames in the
Makefile.
Delete concept of "trusted users" -- this really didn't provide
any security anyway, and caused some problems.
Delete last vestige of support for the word "at" as an equivalent
to the character "@".
Propagate owner-foo alias information into the envelope sender.
Based on code from John Gardiner Myers. This is a major
semantic change -- beware!
Allow $@ on LHS to indicate "match zero" -- this is used to match
the null expression.
6.26/6.8 93/02/21
Don't "lose" queue runs. Very important fix from (who else?)
Eric Wassenaar.
Completely reset state on RSET command -- from Eric Wassenaar.
Send error messages and return receipts using an envelope sender
of <> regardless of the setting of $n. Rewriting rules
can undo this if they feel the necessity, as might be
needed for networks that don't understand the syntax.
This is permitted by RFC 821 section 3.6 and required by
RFC 1123 section 5.3.3. THIS REQUIRES VERSION 4 CONFIG
FILES because the rulesets must be able to parse <>
properly.
Don't ever send error messages to "<>" -- they will get sent to
the local postmaster or dumped in /usr/tmp/dead.letter
instead. Per RFC 1123 section 5.3.3.
Explicitly check for email to yourself as a dotted quad. You
have to call $[ [ ... ] $] to get this.
Up the message timeout to five days per RFC 1123 section 5.3.1.1.
Make all read timeouts individually configurable, as strongly
recommended by RFC 1123 section 5.3.2.
Use f_bavail (blocks available to regular users) instead of f_bfree
(blocks available to superuser) in free block checks.
Change $d macro to be the current time, not the origination time,
since this is consistent with how it is used now.
Generalization of enoughspace from Eric Wassenaar covering
SGI, Apollo, HPUX, Ultrix, and SunOS.
Ignore process group signals -- some front ends can do this if
you kill a window too quickly. From Eric Wassenaar.
Change umask to 022.
6.25/6.8 93/02/20
Close all cached connections before calling mailers and after
forking for delivery (caused double closes which resulted
in false errors).
Add FEATURE(redirect) in config files -- this allows you to alias
old addresses to a pointer to the new address that will
give a 551 error message, but not deliver the mail.
Some code changes to make the 551 errors look pretty.
Names of M4 program paths in config files have changed -- they
are all XXX_MAILER_PATH now, to match XXX_MAILER_FLAGS.
Fix a bug in the QSELFREF code having to do with empty .forward
files, reported by Eric Wassenaar.
Add option "p" (privacy flags); this allows you to tune how
picky the SMTP server will be. This also adds the
confPRIVACY_FLAGS M4 macro in the config files.
Add option "b" (minimum blocks free). If there are fewer than
this number of blocks free on the filesystem containing
the queue directory, the SMTP MAIL command will return
a 452 response and ask you to try again later. This
also adds the confMIN_FREE_BLOCKS M4 macro in the config
files.
Made VRFY just verify (doesn't expand aliases and .forward files);
EXPN does full expansion. RCPT in queue-only mode also
doesn't chase aliases and .forward.
6.24/6.7 93/02/19
Increase the number of domain search entries in domain.c to allow
for the extra "" entry indicating the root domain.
Reported by Motonori Nakamura of Kyoto U.
Add a "SMART_HOST" in the configs for UUCP-connected sites that
want to forward all mail with extra "@"s to that site.
Also allows SMART_HOST, LOCAL_RELAY, and MAIL_HUB to
be specified as ``mailer:hostname'' to use an alternate
mailer.
Clarified and updated some wording in the Operations Guide.
Add the "c" mailer flag -- this suppresses all comment parts of
addresses (requested by John Curran of NEARnet).
Have -v print prompts in -bt mode even if stdin is not a terminal
(default behaviour is to be silent if not reading from
a terminal). Suggested by Bryan Costales, ICSI.
Move the metacharacters from C0 space (\001-\037) into C1 space
(\201-\237). This also fixes a bunch of potential bugs
with G1 characters (\240-\276) in headers relating to
negative numbers passed to isspace() et al.
Add YP_LAST_MODIFIED and YP_MASTER_NAME to DBM version of alias
database if YPCOMPAT is #defined. Enhancement from
Takahiro Kanbe of Fuji Xerox Information Systems Co., Ltd.
Add "list" Precedence (-30); this can be used with old sendmails
which will map to precedence 0 (which will return error
messages). Suggested by Stephen R. van den Berg.
Many bug fixes from Eric Wassenaar of the National Institute for
Nuclear and High-Energy Physics, Amsterdam:
Clear timeouts properly on open failures in include().
Don't dereference through NULL if no home directory found.
Re-establish SIGCHLD signal on System 5 in reapchild().
Avoid NULL pointer reference on -pFOO flag.
Properly handle backslash escapes in comments.
Correctly check reply status on SMTP NOOP command.
Properly save SMTP error message if peer gives
"Service Shutting Down" message.
Avoid writing to the transcript if it couldn't be opened.
Signal errors in SMTP children to parent properly.
Handle self references in a list more globally (include a
QSELFREF bit in the address flags). This enhancement
was suggested by Eric Wassenaar.
Use initgroups() in hpux, even though it's System-V based. The
HASINITGROUPS compile flag can set this on other systems.
This HPUX behaviour was pointed out by Eric Wassenaar.
6.23/6.6 93/02/16
Clean up handling of LogLevel to make it easier to figure out
what's on what level.
Change log levels to have some consistency:
1 serious system failures, security problems
2 lost communications, protocol failures
3 other serious failures
4 minor errors
5 message collection
6 vrfy logging, creation of return-to-sender
7 delivery failures
8 delivery successes
9 delivery tempfails (queue ups)
10 database expansion
>64 debugging
Allow IDA-style separated processing on S= and R= in Mailer
definition lines. Note that rulesets 1 and 2 are
still used for both addresses as before. Bruce Lilly
gave a convincing argument that RFC976 insists on
this behaviour.
Added some time zones to arpatounix -- they may not be in the
standards, but they are in use. However, I may delete
arpatounix entirely -- there appears to be no reason
for it to exist.
Change to UUCP mailer (in cf directory) to try to do a saner job.
I'm still not certain about this mailer in general.
6.22/6.5 93/02/15
Fix bug that prevents saving letters in ~/dead.letter.
Don't add angle brackets in VRFY command if angle brackets already
exist in the address.
Fix bogus error message in udbexpand.
Null terminate host buffers in buildaddr (broken in 6.21) --
IMPORTANT FIX!!
6.21/6.5 93/02/15
Fix another incorrect error message in alias.c, found by Azuma
Okamoto.
Fix a couple of problems in the more-configurable config files,
found by Tom Ivar Helbekkmo.
Fix problem with quoted :include: entries.
Don't duplicate the filename on verbose printing of .forward and
:include: contents.
Extend size of prescan buffer (to allow bigger addresses). Also,
detect some buffer overflows.
Log user SMTP protocol errors (log level 4).
6.20/6.4 93/02/14
Fix another problem in the MCI state machine caused when there
were errors generated from the other end to commands
other than RCPT.
6.19/6.4 93/02/14
Include load average support for DEC Alpha running OSF/1.
Fix multiple-response problem with errors in MAIL From: line.
Fix SMTP reply codes for invalid address syntaxes (give 501;
never give multiple error messages for a single message).
Fix problem where a cached connection timeout rejects all
later connects to that host.
Fix incorrect error message if alias.c is compiled with DBM only.
Additional changes to fix nested conditionals (from Bruce Lilly).
Recover more gracefully from operating system failures, particularly
NULL returns from openmailer (from Noritoshi Demizu,
OMRON Corporation).
Log forward, alias, and userdb expand operations on log level 10;
concept suggested by P{r (Pell) Emanuelsson.
Changes for HPUX 8.07 compatibility.
6.18/6.4 93/02/12
Allow any config option to be set using an M4 define.
Change UNAME compile flag to HASUNAME for IDA compatibility
(besides, it's a better name).
Note in README that on SunOS it must be linked -Bstatic.
Fairly major change in domain.c to handle wildcard MX records
more rationally. NOTE: the "w" option (no wildcard MX
records match local domain) has been eliminated.
Fix some unset variable references pointed out by Bruce Lilly.
Fix host name in process titles when using cached connection.
6.17/6.3 93/01/28
Fix System 5 compatibility changes to be compatible with the rest
of the world.
6.16/6.3 93/01/28
Experimental fix for problem handling errors in the SMTP
protocol in conjunction with connection caching.
System 5 compatibility changes.
6.15/6.3 93/01/26
Fix a bug that causes local mail delivered using -odq to be
eliminated as a duplicate (because it matched the
ctladdr, now passed in as a C line). These changes
are pretty tricky......
6.14/6.3 93/01/25
Add debugging for some MCI errors.
6.13/6.3 93/01/22
Fix -e compatibility flag to take a value.
Fix a couple of minor compilation warnings on Sun cc.
Improve error messages in a few cases to be more self-explanatory.
6.12/6.3 93/01/21
Fix yet-another problem with environment handling, pointed out
by Yoshitaka Tokugawa and Tom Ivar Helbekkmo.
Some heuristics to try to limit resource exhaustion problems
if a downstream host has been down for a long time.
Fix problem with incorrect host name being logged in "Connection
timed out" messages (from Tom Ivar Helbekkmo).
Fix some ANSI C problems (from Takahiro Kanbe).
Properly log message sender on returned mail during queue run.
Count number of recipients properly.
Fix a problem in yp map code.
Diagnose "message timed out" (from Motonori Nakamura).
6.11/6.3 93/01/20
Fix problem with address delimitor inside quotes.
Define $k and $=k to be the UUCP name (from the uname call)
based on code from Bruce Lilly.
6.10/6.2 93/01/18
Implement arpatounix (largely code from Bruce Lilly).
Log more info (suggested by John Myers).
Allow nested $?...$|...$. (inspired by code from Bruce Lilly of
Sony US).
POSIX compatibility (noted by Keith Bostic).
Handle SMTP MAIL command errors properly (urged by several people,
notably John Myers of CMU).
Do early diagnosis of .cf errors (notably referencing a RHS
substitution that isn't on the LHS).
Adjust checkpointing to better handle batched recipients, suggested
by John Myers.
Fix miscellaneous bugs.
(config files:) Implement MAIL_HUB for all local mail (to handle
NFS-mounted directories) as urged by Tom Ivar Helbekkmo
of the Norwegian School of Economics.
6.9/6.1 93/01/13
Environment handling simplification/bug fix -- child processes
get a minimal, fixed environment. This avoids different
behaviour in queue runs.
Handle commas inside comments properly.
Properly limit large messages submitted in -obq mode.
6.8/6.1 93/01/10
Check mtime of thaw file against .cf and sendmail binary, based on
code from John Myers.
6.7/6.1 93/01/10
MX piggybacking, based on code from John Myers@CMU.
Allow checkcompat to return -1 to mean tempfail.
Bug fix in m_mno computation.
6.6/6.1 93/01/09
Tuning of queueing functions as recommended by John Gardiner Myers.
Return mail headers (no body) on messages with negative precedence.
Minor other bug fixes.
6.5/6.1 93/01/03
Fix botch causing queued headers to have ?XX? prefixes.
6.4/6.1 93/01/02
Changes to recognize special mailer types (e.g., file) early.
6.3/6.1 93/01/01
Pass timeouts to sfgets.
Check for control characters in addresses.
Fixed deferred error reporting.
Report duplicate aliases.
Handle mixed case recursive aliases.
Misc bug fixes.
6.2/6.1 92/12/30
Put return-receipt-to on a conf.c flag (but don't set it).
Fix minor syslog problem.