73 lines
2.3 KiB
Plaintext
73 lines
2.3 KiB
Plaintext
NetBSD/hp300 1.2 will run on most HP 9000/300- and 400-series machines.
|
|
The smallest amount of RAM that has been tested is 4M. If you wish to
|
|
run X, more RAM is recommended.
|
|
|
|
Here is a table of recommended HD partition sizes for a full install:
|
|
partition: advise needed
|
|
root (/) 15M 10M
|
|
user (/usr) 80M 45M
|
|
swap (2 or 3 * RAM) 6M (see note below)
|
|
Anything else is up to you!
|
|
|
|
NOTE: The hp300 installation procedure uses a `miniroot' filesystem
|
|
which is placed into the swap area of the disk. The swap partition
|
|
must be large enough to hold this miniroot image.
|
|
|
|
The following HP hardware is supported:
|
|
|
|
CPUs:
|
|
68020-based: 318, 319, 320, 330, and 350.
|
|
68030-based: 340, 345, 360, 370, 375, and 400(*).
|
|
68040-based: 380, 425(*), and 433(*).
|
|
|
|
Disks:
|
|
HP-IB/CS80: 7912, 7914, 7933, 7936, 7937, 7945, 7957,
|
|
7958, 7959, 2200, and 2203.
|
|
SCSI-I(**), including magneto-optical and CD-ROM.
|
|
|
|
Tape drives:
|
|
Low-density HP-IB/CS80 cartridge: 7914, 7946, and 9144.
|
|
High-density HP-IB/CS80 cartridge: 9145.
|
|
HP-IB/CS80 1/2": 7974A, 7978A/B, 7979A, 7980A, and 7980XC.
|
|
SCSI: HP DAT, Exabyte, and SCSI QIC drives such as
|
|
the Archive Viper.
|
|
|
|
RS232 interfaces:
|
|
98644 built-in single port (dca).
|
|
98642 4-port (dcm).
|
|
98638 8-port (dcm).
|
|
|
|
Network interfaces:
|
|
98643 built-in and add-on LAN cards.
|
|
|
|
Displays:
|
|
98544, 98545, and 98547 color and monochrome Topcat.
|
|
98548, 98549, and 98550 color and monochrome Catseye.
|
|
98700 and 98710 Gatorbox.
|
|
98720 and 98721 Renaissance.
|
|
98730 and 98731 DaVinci.
|
|
A1096A monochrome Hyperion.
|
|
|
|
Input devices:
|
|
General interface supporting all HIL devices: keyboard,
|
|
2 and 3 button mice(***), and ID module.
|
|
|
|
Miscellaneous:
|
|
Battery-backed real-time clock.
|
|
98624 built-in HP-IB interface.
|
|
98625A and 98625B `fast' HP-IB interface.
|
|
98658A built-in and add-on SCSI interface.
|
|
Printers and plotters on RS232 and HP-IB.
|
|
SCSI autochanger.
|
|
|
|
(*) 400-series machines configured for Domain/OS are not fully supported,
|
|
notably, the keyboard doesn't work and the ROMs must be in `HP-UX mode'.
|
|
|
|
(**) SCSI-II drives are known to work, though this may require changing a
|
|
jumper on some drives. See your disk's documentation for details.
|
|
|
|
(***) Serial mice connected to a `HIL to quad' converter are also known
|
|
to work.
|
|
|
|
If it's not on this list, there is no official support for it in this release.
|