Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/isa/esp_isa.c

637 lines
18 KiB
C
Raw Blame History

/* $NetBSD: esp_isa.c,v 1.10 1998/06/09 07:24:59 thorpej Exp $ */
/*-
* Copyright (c) 1997 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1994 Peter Galbavy
* Copyright (c) 1995 Paul Kranenburg
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Peter Galbavy
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Based on aic6360 by Jarle Greipsland
*
* Acknowledgements: Many of the algorithms used in this driver are
* inspired by the work of Julian Elischer (julian@tfs.com) and
* Charles Hannum (mycroft@duality.gnu.ai.mit.edu). Thanks a million!
*/
/*
* Initial m68k mac support from Allen Briggs <briggs@macbsd.com>
* (basically consisting of the match, a bit of the attach, and the
* "DMA" glue functions).
*/
/*
* Copyright (c) 1994, 1996, 1997 Charles M. Hannum. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Charles M. Hannum.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1997 Eric S. Hvozda (hvozda@netcom.com)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Eric S. Hvozda.
* 4. The name of Eric S. Hvozda may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/buf.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/isa/isavar.h>
#include <dev/isa/isadmavar.h>
#include <dev/ic/ncr53c9xreg.h>
#include <dev/ic/ncr53c9xvar.h>
#include <dev/isa/espvar.h>
int esp_isa_match __P((struct device *, struct cfdata *, void *));
void esp_isa_attach __P((struct device *, struct device *, void *));
struct cfattach esp_isa_ca = {
sizeof(struct esp_softc), esp_isa_match, esp_isa_attach
};
struct scsipi_adapter esp_switch = {
ncr53c9x_scsi_cmd,
minphys, /* no max at this level; handled by DMA code */
NULL,
NULL,
};
struct scsipi_device esp_dev = {
NULL, /* Use default error handler */
NULL, /* have a queue, served by this */
NULL, /* have no async handler */
NULL, /* Use default 'done' routine */
};
int esp_debug = 0; /* ESP_SHOWTRAC | ESP_SHOWREGS | ESP_SHOWMISC */
/*
* Functions and the switch for the MI code.
*/
u_char esp_read_reg __P((struct ncr53c9x_softc *, int));
void esp_write_reg __P((struct ncr53c9x_softc *, int, u_char));
int esp_dma_isintr __P((struct ncr53c9x_softc *));
void esp_dma_reset __P((struct ncr53c9x_softc *));
int esp_dma_intr __P((struct ncr53c9x_softc *));
int esp_dma_setup __P((struct ncr53c9x_softc *, caddr_t *,
size_t *, int, size_t *));
void esp_dma_go __P((struct ncr53c9x_softc *));
void esp_dma_stop __P((struct ncr53c9x_softc *));
int esp_dma_isactive __P((struct ncr53c9x_softc *));
struct ncr53c9x_glue esp_glue = {
esp_read_reg,
esp_write_reg,
esp_dma_isintr,
esp_dma_reset,
esp_dma_intr,
esp_dma_setup,
esp_dma_go,
esp_dma_stop,
esp_dma_isactive,
NULL, /* gl_clear_latched_intr */
};
/*
* Look for the board
*/
int
esp_find(iot, ioh, epd)
bus_space_tag_t iot;
bus_space_handle_t ioh;
struct esp_probe_data *epd;
{
u_int vers;
u_int p1;
u_int p2;
u_int jmp;
ESP_TRACE(("[esp_find] "));
/* reset card before we probe? */
/*
* Switch to the PIO regs and look for the bit pattern
* we expect...
*/
bus_space_write_1(iot, ioh, NCR_CFG4,
NCRCFG4_CRS1 | bus_space_read_1(iot, ioh, NCR_CFG4));
#define SIG_MASK 0x87
#define REV_MASK 0x70
#define M1 0x02
#define M2 0x05
#define ISNCR 0x80
#define ISESP406 0x40
vers = bus_space_read_1(iot, ioh, NCR_SIGNTR);
p1 = bus_space_read_1(iot, ioh, NCR_SIGNTR) & SIG_MASK;
p2 = bus_space_read_1(iot, ioh, NCR_SIGNTR) & SIG_MASK;
ESP_MISC(("esp_find: 0x%0x 0x%0x 0x%0x\n", vers, p1, p2));
if (!((p1 == M1 && p2 == M2) || (p1 == M2 && p2 == M1)))
return 0;
/* Ok, what is it? */
epd->sc_isncr = (vers & ISNCR);
epd->sc_rev = ((vers & REV_MASK) == ISESP406) ?
NCR_VARIANT_ESP406 : NCR_VARIANT_FAS408;
/* What do the jumpers tell us? */
jmp = bus_space_read_1(iot, ioh, NCR_JMP);
epd->sc_msize = (jmp & NCRJMP_ROMSZ) ? 0x4000 : 0x8000;
epd->sc_parity = jmp & NCRJMP_J2;
epd->sc_sync = jmp & NCRJMP_J4;
epd->sc_id = (jmp & NCRJMP_J3) ? 7 : 6;
switch (jmp & (NCRJMP_J0 | NCRJMP_J1)) {
case NCRJMP_J0 | NCRJMP_J1:
epd->sc_irq = 11;
break;
case NCRJMP_J0:
epd->sc_irq = 10;
break;
case NCRJMP_J1:
epd->sc_irq = 15;
break;
default:
epd->sc_irq = 12;
break;
}
bus_space_write_1(iot, ioh, NCR_CFG4,
~NCRCFG4_CRS1 & bus_space_read_1(iot, ioh, NCR_CFG4));
/* Try to set NCRESPCFG3_FCLK, some FAS408's don't support
* NCRESPCFG3_FCLK even though it is documented. A bad
* batch of chips perhaps?
*/
bus_space_write_1(iot, ioh, NCR_ESPCFG3,
bus_space_read_1(iot, ioh, NCR_ESPCFG3) | NCRESPCFG3_FCLK);
epd->sc_isfast = bus_space_read_1(iot, ioh, NCR_ESPCFG3)
& NCRESPCFG3_FCLK;
return 1;
}
void
esp_init(esc, epd)
struct esp_softc *esc;
struct esp_probe_data *epd;
{
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
ESP_TRACE(("[esp_init] "));
/*
* Set up the glue for MI code early; we use some of it here.
*/
sc->sc_glue = &esp_glue;
sc->sc_rev = epd->sc_rev;
sc->sc_id = epd->sc_id;
/* If we could set NCRESPCFG3_FCLK earlier, we can really move */
sc->sc_cfg3 = NCR_READ_REG(sc, NCR_ESPCFG3);
if ((epd->sc_rev == NCR_VARIANT_FAS408) && epd->sc_isfast) {
sc->sc_freq = 40;
sc->sc_cfg3 |= NCRESPCFG3_FCLK;
}
else
sc->sc_freq = 24;
/* Setup the register defaults */
sc->sc_cfg1 = sc->sc_id;
if (epd->sc_parity)
sc->sc_cfg1 |= NCRCFG1_PARENB;
sc->sc_cfg2 = NCRCFG2_SCSI2;
sc->sc_cfg3 |= NCRESPCFG3_IDM | NCRESPCFG3_FSCSI;
/*
* This is the value used to start sync negotiations
* Note that the NCR register "SYNCTP" is programmed
* in "clocks per byte", and has a minimum value of 4.
* The SCSI period used in negotiation is one-fourth
* of the time (in nanoseconds) needed to transfer one byte.
* Since the chip's clock is given in MHz, we have the following
* formula: 4 * period = (1000 / freq) * 4
*/
if (epd->sc_sync)
{
#ifdef DIAGNOSTIC
printf("%s: sync requested, but not supported; will do async\n",
sc->sc_dev.dv_xname);
#endif
epd->sc_sync = 0;
}
sc->sc_minsync = 0;
/* Really no limit, but since we want to fit into the TCR... */
sc->sc_maxxfer = 64 * 1024;
}
/*
* Check the slots looking for a board we recognise
* If we find one, note it's address (slot) and call
* the actual probe routine to check it out.
*/
int
esp_isa_match(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
struct isa_attach_args *ia = aux;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
struct esp_probe_data epd;
int rv;
ESP_TRACE(("[esp_isa_match] "));
if (ia->ia_iobase != 0x230 && ia->ia_iobase != 0x330)
return 0;
if (bus_space_map(iot, ia->ia_iobase, ESP_ISA_IOSIZE, 0, &ioh))
return 0;
rv = esp_find(iot, ioh, &epd);
bus_space_unmap(iot, ioh, ESP_ISA_IOSIZE);
if (rv) {
if (ia->ia_irq != IRQUNK && ia->ia_irq != epd.sc_irq) {
#ifdef DIAGNOSTIC
printf("esp_isa_match: configured IRQ (%0d) does not "
"match board IRQ (%0d), device not configured\n",
ia->ia_irq, epd.sc_irq);
#endif
return 0;
}
ia->ia_irq = epd.sc_irq;
ia->ia_msize = 0;
ia->ia_iosize = ESP_ISA_IOSIZE;
}
return (rv);
}
/*
* Attach this instance, and then all the sub-devices
*/
void
esp_isa_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct isa_attach_args *ia = aux;
struct esp_softc *esc = (void *)self;
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
struct esp_probe_data epd;
isa_chipset_tag_t ic = ia->ia_ic;
printf("\n");
ESP_TRACE(("[esp_isa_attach] "));
if (bus_space_map(iot, ia->ia_iobase, ESP_ISA_IOSIZE, 0, &ioh)) {
printf("%s: can't map i/o space\n", sc->sc_dev.dv_xname);
return;
}
if (!esp_find(iot, ioh, &epd)) {
printf("%s: esp_find failed\n", sc->sc_dev.dv_xname);
return;
}
if (ia->ia_drq != DRQUNK)
isa_dmacascade(ic, ia->ia_drq);
esc->sc_ih = isa_intr_establish(ic, ia->ia_irq, IST_EDGE, IPL_BIO,
(int (*)(void *))ncr53c9x_intr, esc);
if (esc->sc_ih == NULL) {
printf("%s: couldn't establish interrupt\n",
sc->sc_dev.dv_xname);
return;
}
esp_init(esc, &epd);
esc->sc_ioh = ioh;
esc->sc_iot = iot;
printf("%s:%ssync,%sparity\n", sc->sc_dev.dv_xname,
epd.sc_sync ? " " : " no ", epd.sc_parity ? " " : " no ");
printf("%s", sc->sc_dev.dv_xname);
/*
* Now try to attach all the sub-devices
*/
ncr53c9x_attach(sc, &esp_switch, &esp_dev);
}
/*
* Glue functions.
*/
u_char
esp_read_reg(sc, reg)
struct ncr53c9x_softc *sc;
int reg;
{
struct esp_softc *esc = (struct esp_softc *)sc;
u_char v;
v = bus_space_read_1(esc->sc_iot, esc->sc_ioh, reg);
ESP_REGS(("[esp_read_reg CRS%c 0x%02x=0x%02x] ",
(bus_space_read_1(esc->sc_iot, esc->sc_ioh, NCR_CFG4) &
NCRCFG4_CRS1) ? '1' : '0', reg, v));
return v;
}
void
esp_write_reg(sc, reg, val)
struct ncr53c9x_softc *sc;
int reg;
u_char val;
{
struct esp_softc *esc = (struct esp_softc *)sc;
u_char v = val;
if (reg == NCR_CMD && v == (NCRCMD_TRANS|NCRCMD_DMA)) {
v = NCRCMD_TRANS;
}
ESP_REGS(("[esp_write_reg CRS%c 0x%02x=0x%02x] ",
(bus_space_read_1(esc->sc_iot, esc->sc_ioh, NCR_CFG4) &
NCRCFG4_CRS1) ? '1' : '0', reg, v));
bus_space_write_1(esc->sc_iot, esc->sc_ioh, reg, v);
}
int
esp_dma_isintr(sc)
struct ncr53c9x_softc *sc;
{
ESP_TRACE(("[esp_dma_isintr] "));
return NCR_READ_REG(sc, NCR_STAT) & NCRSTAT_INT;
}
void
esp_dma_reset(sc)
struct ncr53c9x_softc *sc;
{
struct esp_softc *esc = (struct esp_softc *)sc;
ESP_TRACE(("[esp_dma_reset] "));
esc->sc_active = 0;
esc->sc_tc = 0;
}
int
esp_dma_intr(sc)
struct ncr53c9x_softc *sc;
{
struct esp_softc *esc = (struct esp_softc *)sc;
u_char *p;
u_int espphase, espstat, espintr;
int cnt;
ESP_TRACE(("[esp_dma_intr] "));
if (esc->sc_active == 0) {
printf("%s: dma_intr--inactive DMA\n", sc->sc_dev.dv_xname);
return -1;
}
if ((sc->sc_espintr & NCRINTR_BS) == 0) {
esc->sc_active = 0;
return 0;
}
cnt = *esc->sc_pdmalen;
if (*esc->sc_pdmalen == 0) {
printf("%s: data interrupt, but no count left\n",
sc->sc_dev.dv_xname);
}
p = *esc->sc_dmaaddr;
espphase = sc->sc_phase;
espstat = (u_int) sc->sc_espstat;
espintr = (u_int) sc->sc_espintr;
do {
if (esc->sc_datain) {
*p++ = NCR_READ_REG(sc, NCR_FIFO);
cnt--;
if (espphase == DATA_IN_PHASE) {
NCR_WRITE_REG(sc, NCR_CMD, NCRCMD_TRANS);
} else {
esc->sc_active = 0;
}
} else {
if ( (espphase == DATA_OUT_PHASE)
|| (espphase == MESSAGE_OUT_PHASE)) {
NCR_WRITE_REG(sc, NCR_FIFO, *p++);
cnt--;
NCR_WRITE_REG(sc, NCR_CMD, NCRCMD_TRANS);
} else {
esc->sc_active = 0;
}
}
if (esc->sc_active) {
while (!(NCR_READ_REG(sc, NCR_STAT) & 0x80));
espstat = NCR_READ_REG(sc, NCR_STAT);
espintr = NCR_READ_REG(sc, NCR_INTR);
espphase = (espintr & NCRINTR_DIS)
? /* Disconnected */ BUSFREE_PHASE
: espstat & PHASE_MASK;
}
} while (esc->sc_active && espintr);
sc->sc_phase = espphase;
sc->sc_espstat = (u_char) espstat;
sc->sc_espintr = (u_char) espintr;
*esc->sc_dmaaddr = p;
*esc->sc_pdmalen = cnt;
if (*esc->sc_pdmalen == 0) {
esc->sc_tc = NCRSTAT_TC;
}
sc->sc_espstat |= esc->sc_tc;
return 0;
}
int
esp_dma_setup(sc, addr, len, datain, dmasize)
struct ncr53c9x_softc *sc;
caddr_t *addr;
size_t *len;
int datain;
size_t *dmasize;
{
struct esp_softc *esc = (struct esp_softc *)sc;
ESP_TRACE(("[esp_dma_setup] "));
esc->sc_dmaaddr = addr;
esc->sc_pdmalen = len;
esc->sc_datain = datain;
esc->sc_dmasize = *dmasize;
esc->sc_tc = 0;
return 0;
}
void
esp_dma_go(sc)
struct ncr53c9x_softc *sc;
{
struct esp_softc *esc = (struct esp_softc *)sc;
ESP_TRACE(("[esp_dma_go] "));
esc->sc_active = 1;
}
void
esp_dma_stop(sc)
struct ncr53c9x_softc *sc;
{
ESP_TRACE(("[esp_dma_stop] "));
}
int
esp_dma_isactive(sc)
struct ncr53c9x_softc *sc;
{
struct esp_softc *esc = (struct esp_softc *)sc;
ESP_TRACE(("[esp_dma_isactive] "));
return esc->sc_active;
}
Reference in New Issue View Git Blame Copy Permalink