NetBSD/sys/dev/ic/uhareg.h

246 lines
8.5 KiB
C

/* $NetBSD: uhareg.h,v 1.8 2000/06/08 18:22:15 cgd Exp $ */
/*-
* Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum and by Jason R. Thorpe of the Numerical Aerospace
* Simulation Facility, NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Ported for use with the UltraStor 14f by Gary Close (gclose@wvnvms.wvnet.edu)
* Slight fixes to timeouts to run with the 34F
* Thanks to Julian Elischer for advice and help with this port.
*
* Originally written by Julian Elischer (julian@tfs.com)
* for TRW Financial Systems for use under the MACH(2.5) operating system.
*
* TRW Financial Systems, in accordance with their agreement with Carnegie
* Mellon University, makes this software available to CMU to distribute
* or use in any manner that they see fit as long as this message is kept with
* the software. For this reason TFS also grants any other persons or
* organisations permission to use or modify this software.
*
* TFS supplies this software to be publicly redistributed
* on the understanding that TFS is not responsible for the correct
* functioning of this software in any circumstances.
*
* commenced: Sun Sep 27 18:14:01 PDT 1992
* slight mod to make work with 34F as well: Wed Jun 2 18:05:48 WST 1993
*/
typedef u_long physaddr;
typedef u_long physlen;
/************************** board definitions *******************************/
/*
* I/O Port Interface
*/
#define U14_LMASK 0x0000 /* local doorbell mask reg */
#define U14_LINT 0x0001 /* local doorbell int/stat reg */
#define U14_SMASK 0x0002 /* system doorbell mask reg */
#define U14_SINT 0x0003 /* system doorbell int/stat reg */
#define U14_ID 0x0004 /* product id reg (2 ports) */
#define U14_CONFIG 0x0006 /* config reg (2 ports) */
#define U14_OGMPTR 0x0008 /* outgoing mail ptr (4 ports) */
#define U14_ICMPTR 0x000c /* incoming mail ptr (4 ports) */
#define U24_CONFIG 0x0005 /* config reg (3 ports) */
#define U24_LMASK 0x000c /* local doorbell mask reg */
#define U24_LINT 0x000d /* local doorbell int/stat reg */
#define U24_SMASK 0x000e /* system doorbell mask reg */
#define U24_SINT 0x000f /* system doorbell int/stat reg */
#define U24_OGMCMD 0x0016 /* outgoing commands */
#define U24_OGMPTR 0x0017 /* outgoing mail ptr (4 ports) */
#define U24_ICMCMD 0x001b /* incoming commands */
#define U24_ICMPTR 0x001c /* incoming mail ptr (4 ports) */
/*
* UHA_LMASK bits (read only)
*/
#define UHA_LDIE 0x80 /* local doorbell int enabled */
#define UHA_SRSTE 0x40 /* soft reset enabled */
#define UHA_ABORTEN 0x10 /* abort MSCP enabled */
#define UHA_OGMINTEN 0x01 /* outgoing mail interrupt enabled */
/*
* UHA_LINT bits (read only)
*/
#define U14_LDIP 0x80 /* local doorbell int pending */
#define U24_LDIP 0x02 /* local doorbell int pending */
/*
* UHA_LINT bits (write only)
*/
#define U14_OGMFULL 0x01 /* outgoing mailbox is full */
#define U14_ABORT 0x10 /* abort MSCP */
#define U24_OGMFULL 0x02 /* outgoing mailbox is full */
#define UHA_SBRST 0x40 /* scsi bus reset */
#define UHA_ADRST 0x80 /* adapter soft reset */
#define UHA_ASRST 0xc0 /* adapter and scsi reset */
/*
* UHA_SMASK bits (read/write)
*/
#define UHA_ENSINT 0x80 /* enable system doorbell interrupt */
#define UHA_EN_ABORT_COMPLETE 0x10 /* enable abort MSCP complete int */
#define UHA_ENICM 0x01 /* enable ICM interrupt */
/*
* UHA_SINT bits (read)
*/
#define U14_SDIP 0x80 /* system doorbell int pending */
#define U24_SDIP 0x02 /* system doorbell int pending */
#define UHA_ABORT_SUCC 0x10 /* abort MSCP successful */
#define UHA_ABORT_FAIL 0x18 /* abort MSCP failed */
/*
* UHA_SINT bits (write)
*/
#define U14_ICM_ACK 0x01 /* acknowledge ICM and clear */
#define U24_ICM_ACK 0x02 /* acknowledge ICM and clear */
#define UHA_ABORT_ACK 0x18 /* acknowledge status and clear */
/*
* U14_CONFIG bits (read only)
*/
#define U14_DMA_CH5 0x0000 /* DMA channel 5 */
#define U14_DMA_CH6 0x4000 /* 6 */
#define U14_DMA_CH7 0x8000 /* 7 */
#define U14_DMA_MASK 0xc000
#define U14_IRQ15 0x0000 /* IRQ 15 */
#define U14_IRQ14 0x1000 /* 14 */
#define U14_IRQ11 0x2000 /* 11 */
#define U14_IRQ10 0x3000 /* 10 */
#define U14_IRQ_MASK 0x3000
#define U14_HOSTID_MASK 0x0007
/*
* U24_CONFIG bits (read only)
*/
#define U24_MAGIC1 0x08
#define U24_IRQ15 0x10
#define U24_IRQ14 0x20
#define U24_IRQ11 0x40
#define U24_IRQ10 0x80
#define U24_IRQ_MASK 0xf0
#define U24_MAGIC2 0x04
#define U24_HOSTID_MASK 0x07
/*
* EISA registers (offset from slot base)
*/
#define EISA_VENDOR 0x0c80 /* vendor ID (2 ports) */
#define EISA_MODEL 0x0c82 /* model number (2 ports) */
#define EISA_CONTROL 0x0c84
#define EISA_RESET 0x04
#define EISA_ERROR 0x02
#define EISA_ENABLE 0x01
/*
* host_stat error codes
*/
#define UHA_NO_ERR 0x00 /* No error supposedly */
#define UHA_SBUS_ABORT_ERR 0x84 /* scsi bus abort error */
#define UHA_SBUS_TIMEOUT 0x91 /* scsi bus selection timeout */
#define UHA_SBUS_OVER_UNDER 0x92 /* scsi bus over/underrun */
#define UHA_BAD_SCSI_CMD 0x96 /* illegal scsi command */
#define UHA_AUTO_SENSE_ERR 0x9b /* auto request sense err */
#define UHA_SBUS_RES_ERR 0xa3 /* scsi bus reset error */
#define UHA_BAD_SG_LIST 0xff /* invalid scatter gath list */
#define UHA_NSEG 33 /* number of dma segments supported */
struct uha_dma_seg {
physaddr seg_addr;
physlen seg_len;
};
#pragma pack(1)
struct uha_mscp {
u_char opcode:3;
#define UHA_HAC 0x01 /* host adapter command */
#define UHA_TSP 0x02 /* target scsi pass through command */
#define UHA_SDR 0x04 /* scsi device reset */
u_char xdir:2; /* xfer direction */
#define UHA_SDET 0x00 /* determined by scsi command */
#define UHA_SDIN 0x01 /* scsi data in */
#define UHA_SDOUT 0x02 /* scsi data out */
#define UHA_NODATA 0x03 /* no data xfer */
u_char dcn:1; /* disable disconnect for this command */
u_char ca:1; /* cache control */
u_char sgth:1; /* scatter gather flag */
u_char target:3;
u_char chan:2; /* scsi channel (always 0 for 14f) */
u_char lun:3;
physaddr data_addr;
physlen data_length;
physaddr link_addr;
u_char link_id;
u_char sg_num; /* number of scat gath segs */
/*in s-g list if sg flag is */
/*set. starts at 1, 8bytes per */
u_char req_sense_length;
u_char scsi_cmd_length;
struct scsi_generic scsi_cmd;
u_char host_stat;
u_char target_stat;
physaddr sense_ptr; /* if 0 no auto sense */
struct uha_dma_seg uha_dma[UHA_NSEG];
struct scsipi_sense_data mscp_sense;
/*-----------------end of hardware supported fields----------------*/
TAILQ_ENTRY(uha_mscp) chain;
struct uha_mscp *nexthash;
u_long hashkey;
struct scsipi_xfer *xs; /* the scsipi_xfer for this cmd */
int flags;
#define MSCP_ALLOC 0x01
#define MSCP_ABORT 0x02
int timeout;
/*
* This DMA map maps the buffer involved in the transfer.
* It's contents are loaded into "uha_dma" above.
*/
bus_dmamap_t dmamap_xfer;
};
#pragma pack()