20d6d7ec56
is supported, which is not present in all flash chips. Add lmtemp(4), an LM75 temperature sensor, which is found in some Synology NAS models.
376 lines
13 KiB
Plaintext
376 lines
13 KiB
Plaintext
# $NetBSD: GENERIC,v 1.91 2015/09/30 14:22:02 phx Exp $
|
|
#
|
|
# machine description file for GENERIC NAS
|
|
#
|
|
# This machine description file is used to generate the default NetBSD
|
|
# kernel. The generic kernel does not include all options, subsystems
|
|
# and device drivers, but should be useful for most applications.
|
|
#
|
|
# The machine description file can be customised for your specific
|
|
# machine to reduce the kernel size and improve its performance.
|
|
#
|
|
# For further information on compiling NetBSD kernels, see the config(8)
|
|
# man page.
|
|
#
|
|
# For further information on hardware support for this architecture, see
|
|
# the intro(4) man page. For further information about kernel options
|
|
# for this architecture, see the options(4) man page. For an explanation
|
|
# of each device driver in this file see the section 4 man page for the
|
|
# device.
|
|
|
|
include "arch/sandpoint/conf/std.sandpoint"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC-$Revision: 1.91 $"
|
|
|
|
maxusers 32
|
|
|
|
#options ALTIVEC # Include AltiVec support
|
|
|
|
# Standard system options
|
|
#options INSECURE # disable kernel security levels
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
options KTRACE
|
|
|
|
options SYSVMSG # System V message queues
|
|
options SYSVSEM # System V semaphores
|
|
options SYSVSHM # System V shared memory
|
|
|
|
#options MODULAR # module(7) support
|
|
#options MODULAR_DEFAULT_AUTOLOAD
|
|
#options USERCONF # userconf(4) support
|
|
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
|
|
|
|
# Enable experimental buffer queue strategy for better responsiveness under
|
|
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
|
|
#options BUFQ_READPRIO
|
|
#options BUFQ_PRIOCSCAN
|
|
|
|
# Diagnostic/debugging support options
|
|
#options DIAGNOSTIC # cheap kernel consistency checks
|
|
#options DEBUG # expensive debugging checks/support
|
|
options DDB
|
|
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
|
|
#options TRAP_PANICWAIT
|
|
#options PMAPCHECK
|
|
#options PMAPDEBUG
|
|
options MSGBUFSIZE=65536
|
|
|
|
#makeoptions DEBUG="-g"
|
|
|
|
# Compatibility options
|
|
options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI
|
|
options COMPAT_09 # NetBSD 0.9,
|
|
options COMPAT_10 # NetBSD 1.0,
|
|
options COMPAT_11 # NetBSD 1.1,
|
|
options COMPAT_12 # NetBSD 1.2 (and 386BSD and BSDI),
|
|
options COMPAT_13 # NetBSD 1.3 (and 386BSD and BSDI),
|
|
options COMPAT_14 # NetBSD 1.4,
|
|
options COMPAT_15 # NetBSD 1.5,
|
|
options COMPAT_16 # NetBSD 1.6,
|
|
options COMPAT_20 # NetBSD 2.0,
|
|
options COMPAT_30 # NetBSD 3.0,
|
|
options COMPAT_40 # NetBSD 4.0,
|
|
options COMPAT_50 # NetBSD 5.0,
|
|
options COMPAT_60 # NetBSD 6.0, and
|
|
options COMPAT_70 # NetBSD 7.0 binary compatibility.
|
|
options COMPAT_43 # 4.3BSD, 386BSD, and BSDI
|
|
#options COMPAT_386BSD_MBRPART # recognize old partition ID
|
|
#options COMPAT_LINUX # binary compatibility with Linux
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
|
|
|
|
# Wedge support
|
|
options DKWEDGE_AUTODISCOVER # Automatically add dk(4) instances
|
|
options DKWEDGE_METHOD_GPT # Supports GPT partitions as wedges
|
|
#options DKWEDGE_METHOD_BSDLABEL # Support disklabel entries as wedges
|
|
#options DKWEDGE_METHOD_MBR # Support MBR partitions as wedges
|
|
options DKWEDGE_METHOD_APPLE # Support Apple partitions as wedges
|
|
|
|
# File systems
|
|
file-system FFS # UFS
|
|
file-system EXT2FS # second extended file system (linux)
|
|
#file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NFS # Network File System client
|
|
#file-system NTFS # Windows/NT file system (experimental)
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # MS-DOS file system
|
|
file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
file-system NULLFS # loopback file system
|
|
#file-system OVERLAY # overlay file system
|
|
file-system PROCFS # /proc
|
|
#file-system UMAPFS # NULLFS + uid and gid remapping
|
|
#file-system UNION # union file system
|
|
#file-system CODA # Coda File System; also needs vcoda (below)
|
|
#file-system SMBFS # experimental - CIFS; also needs nsmb (below)
|
|
file-system PTYFS # /dev/ptm support
|
|
file-system TMPFS # Efficient memory file-system
|
|
|
|
# File system options
|
|
options QUOTA # legacy UFS quotas
|
|
options QUOTA2 # new, in-filesystem UFS quotas
|
|
#options FFS_EI # FFS Endian Independent support
|
|
options WAPBL # File system journaling support
|
|
options NFSSERVER # Network File System server
|
|
#options FFS_NO_SNAPSHOT # No FFS snapshot support
|
|
options UFS_EXTATTR # Extended attribute support for UFS1
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
|
|
#options NFS_BOOT_DHCP
|
|
options NFS_BOOT_BOOTPARAM,NFS_BOOT_BOOTP
|
|
|
|
# Networking options
|
|
#options GATEWAY # packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # IP multicast routing
|
|
#options PIM # Protocol Independent Multicast
|
|
#options NETATALK # AppleTalk networking protocols
|
|
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
#options PPP_DEFLATE # Deflate compression support for PPP
|
|
#options PPP_FILTER # Active filter support for PPP (requires BPF)
|
|
#options IPFILTER_LOG # ipmon(8) log support
|
|
#options IPFILTER_LOOKUP # ippool(8) support
|
|
#options IPFILTER_COMPAT # Compat for IP-Filter
|
|
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
#options ALTQ # Manipulate network interfaces' output queues
|
|
#options ALTQ_BLUE # Stochastic Fair Blue
|
|
#options ALTQ_CBQ # Class-Based Queueing
|
|
#options ALTQ_CDNR # Diffserv Traffic Conditioner
|
|
#options ALTQ_FIFOQ # First-In First-Out Queue
|
|
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
|
|
#options ALTQ_HFSC # Hierarchical Fair Service Curve
|
|
#options ALTQ_LOCALQ # Local queueing discipline
|
|
#options ALTQ_PRIQ # Priority Queueing
|
|
#options ALTQ_RED # Random Early Detection
|
|
#options ALTQ_RIO # RED with IN/OUT
|
|
#options ALTQ_WFQ # Weighted Fair Queueing
|
|
|
|
# These options enable verbose messages for several subsystems.
|
|
# Warning, these may compile large string tables into the kernel!
|
|
#options PCIVERBOSE # verbose PCI device autoconfig messages
|
|
#options MIIVERBOSE # verbose PHY autoconfig messages
|
|
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
|
#options SCSIVERBOSE # human readable SCSI error messages
|
|
#options USBVERBOSE # verbose USB device autoconfig messages
|
|
|
|
# Kernel root file system and dump configuration
|
|
config netbsd root on ? type ?
|
|
|
|
#
|
|
# Device configuration
|
|
#
|
|
mainbus0 at root
|
|
cpu* at mainbus0
|
|
|
|
#cfi0 at mainbus0
|
|
#nor* at cfi?
|
|
#flash* at nor?
|
|
|
|
nhpow0 at mainbus0 # NH230/231 power,LED,buttons
|
|
|
|
#options PCI_NETBSD_CONFIGURE
|
|
pci* at mainbus0 bus ?
|
|
pchb* at pci? dev ? function ? # PCI host bridge
|
|
|
|
eumb* at mainbus0
|
|
com0 at eumb? unit 0 # console at 0x4500
|
|
#com1 at eumb? unit 1
|
|
satmgr0 at eumb? unit 1 # satmgr at 0x4600
|
|
ociic* at eumb?
|
|
iic* at ociic?
|
|
lmtemp* at iic? addr 0x48 # LM75 temperature sensor
|
|
rs5c372rtc* at iic? addr 0x32
|
|
s390rtc* at iic? addr 0x30
|
|
pcf8563rtc* at iic? addr 0x51
|
|
dsrtc* at iic? addr 0x68
|
|
strtc* at iic? addr 0x68
|
|
options STRTC_NO_WATCHDOG
|
|
options STRTC_NO_USERRAM
|
|
|
|
# PCI IDE controllers - see pciide(4) for supported hardware.
|
|
acardide* at pci? dev ? function ? # Acard IDE controllers
|
|
cmdide* at pci? dev ? function ? # CMD tech IDE controllers
|
|
iteide* at pci? dev ? function ? # IT Express IDE controllers
|
|
satalink* at pci? dev ? function ? # SiI SATALink controllers
|
|
viaide* at pci? dev ? function ? # VIA IDE controllers
|
|
|
|
# ATA (IDE) bus support
|
|
atabus* at ata?
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
wd* at atabus? drive ? flags 0x0000
|
|
|
|
# ATAPI bus support
|
|
atapibus* at atapi?
|
|
|
|
# ATAPI devices
|
|
# flags have the same meaning as for IDE drives.
|
|
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
|
|
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
|
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
|
|
|
|
# PCI network interfaces
|
|
ral* at pci? dev ? function ? # Ralink Technology RT25x0 802.11a/b/g
|
|
re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S
|
|
skc* at pci? dev ? function ? # Marvell Yukon Gigabit Ethernet
|
|
sk* at skc? # Marvell Yukon Gigabit Ethernet
|
|
stge* at pci? dev ? function ? # Sundance ST1023 Gigabit
|
|
tlp* at pci? dev ? function ? # DEC Tulip and similar
|
|
wm* at pci? dev ? function ? # Intel 8254x Gigabit Ethernet
|
|
|
|
inphy* at mii? phy ? # Intel 82555 PHYs
|
|
nsphy* at mii? phy ? # NS83840 PHYs
|
|
rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs
|
|
makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
|
|
ukphy* at mii? phy ? # generic unknown PHYs
|
|
|
|
# GPIO devices
|
|
gpio* at gpiobus?
|
|
|
|
# USB Controller and Devices
|
|
ehci* at pci? dev ? function ? # Enhanced Host Controller
|
|
ohci* at pci? dev ? function ? # Open Host Controller
|
|
|
|
# USB bus support
|
|
usb* at ehci?
|
|
usb* at ohci?
|
|
|
|
# USB Hubs
|
|
uhub* at usb?
|
|
uhub* at uhub? port ?
|
|
|
|
# USB HID devices
|
|
uhidev* at uhub? port ? configuration ? interface ? # USB HID device
|
|
uthum* at uhidev? reportid ? # TEMPerHUM sensors
|
|
uhid* at uhidev? reportid ? # USB Generic HID
|
|
|
|
# USB video
|
|
uvideo* at uhub? # USB Video Class capture devices
|
|
video* at videobus?
|
|
|
|
# USB printer
|
|
ulpt* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB Mass Storage
|
|
umass* at uhub? port ? configuration ? interface ?
|
|
wd* at umass?
|
|
|
|
# USB scanners
|
|
#uscanner* at uhub? port ?
|
|
ugen* at uhub? port ? configuration ? interface ? # USB Generic driver
|
|
|
|
# SCSI bus support
|
|
scsibus* at umass?
|
|
|
|
# SCSI devices
|
|
sd* at scsibus? target ? lun ? # SCSI disk drives
|
|
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
|
|
|
|
|
|
#
|
|
# Pseudo-Devices
|
|
#
|
|
#pseudo-device crypto # /dev/crypto device
|
|
#pseudo-device swcrypto # software crypto implementation
|
|
|
|
# disk/mass storage pseudo-devices
|
|
#pseudo-device ccd # concatenated/striped disk devices
|
|
#pseudo-device cgd # cryptographic disk devices
|
|
pseudo-device fss # file system snapshot device
|
|
#pseudo-device putter # for puffs and pud
|
|
|
|
pseudo-device raid # RAIDframe disk driver
|
|
options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
# Options to enable various other RAIDframe RAID types.
|
|
#options RF_INCLUDE_EVENODD=1
|
|
#options RF_INCLUDE_RAID5_RS=1
|
|
#options RF_INCLUDE_PARITYLOGGING=1
|
|
#options RF_INCLUDE_CHAINDECLUSTER=1
|
|
#options RF_INCLUDE_INTERDECLUSTER=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
|
|
pseudo-device vnd
|
|
#options VND_COMPRESSION # compressed vnd(4)
|
|
|
|
# network pseudo-devices
|
|
pseudo-device loop
|
|
pseudo-device bpfilter # packet filter
|
|
#pseudo-device carp # Common Address Redundancy Protocol
|
|
#pseudo-device ppp # Point-to-Point Protocol
|
|
#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
#pseudo-device ipfilter
|
|
#pseudo-device pf # PF packet filter
|
|
#pseudo-device pflog # PF log if
|
|
#pseudo-device sl # Serial Line IP
|
|
#pseudo-device tun # network tunneling over tty
|
|
#pseudo-device tap # virtual Ethernet
|
|
#pseudo-device gre # generic L3 over IP tunnel
|
|
#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith # IPv[46] tcp relay translation i/f
|
|
#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
|
|
#pseudo-device vlan # IEEE 802.1q encapsulation
|
|
#pseudo-device bridge # simple inter-network bridging
|
|
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
|
|
#pseudo-device agr # IEEE 802.3ad link aggregation
|
|
|
|
#
|
|
# accept filters
|
|
#pseudo-device accf_data # "dataready" accept filter
|
|
#pseudo-device accf_http # "httpready" accept filter
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
pseudo-device ksyms # /dev/ksyms
|
|
#pseudo-device lockstat # lock profiling
|
|
|
|
# a pseudo device needed for Coda # also needs CODA (above)
|
|
#pseudo-device vcoda # coda minicache <-> venus comm.
|
|
|
|
# a pseudo device needed for SMBFS
|
|
#pseudo-device nsmb # experimental - SMB requester
|
|
|
|
# userland interface to drivers, including autoconf and properties retrieval
|
|
pseudo-device drvctl
|
|
|
|
# Veriexec
|
|
#
|
|
# a pseudo device needed for veriexec
|
|
#pseudo-device veriexec
|
|
#
|
|
# Uncomment the fingerprint methods below that are desired. Note that
|
|
# removing fingerprint methods will have almost no impact on the kernel
|
|
# code size.
|
|
#
|
|
#options VERIFIED_EXEC_FP_RMD160
|
|
#options VERIFIED_EXEC_FP_SHA256
|
|
#options VERIFIED_EXEC_FP_SHA384
|
|
#options VERIFIED_EXEC_FP_SHA512
|
|
#options VERIFIED_EXEC_FP_SHA1
|
|
#options VERIFIED_EXEC_FP_MD5
|
|
|
|
#options PAX_MPROTECT=0 # PaX mprotect(2) restrictions
|
|
#options PAX_ASLR=0 # PaX Address Space Layout Randomization
|