NetBSD/usr.bin/make/make.1

.\"	$NetBSD: make.1,v 1.146 2008/11/26 19:08:05 wiz Exp $
.\"
.\" Copyright (c) 1990, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"	from: @(#)make.1	8.4 (Berkeley) 3/19/94
.\"
.Dd November 25, 2008
.Dt MAKE 1
.Os
.Sh NAME
.Nm make
.Nd maintain program dependencies
.Sh SYNOPSIS
.Nm
.Op Fl BeikNnqrstWX
.Bk -words
.Op Fl D Ar variable
.Ek
.Bk -words
.Op Fl d Ar flags
.Ek
.Bk -words
.Op Fl f Ar makefile
.Ek
.Bk -words
.Op Fl I Ar directory
.Ek
.Bk -words
.Op Fl J Ar private
.Ek
.Bk -words
.Op Fl j Ar max_jobs
.Ek
.Bk -words
.Op Fl m Ar directory
.Ek
.Bk -words
.Op Fl T Ar file
.Ek
.Bk -words
.Op Fl V Ar variable
.Ek
.Op Ar variable=value
.Bk -words
.Op Ar target ...
.Ek
.Sh DESCRIPTION
.Nm
is a program designed to simplify the maintenance of other programs.
Its input is a list of specifications as to the files upon which programs
and other files depend.
If no
.Fl f Ar makefile
makefile option is given,
.Nm
will try to open
.Ql Pa makefile
then
.Ql Pa Makefile
in order to find the specifications.
If the file
.Ql Pa .depend
exists, it is read (see
.Xr mkdep 1 ) .
.Pp
This manual page is intended as a reference document only.
For a more thorough description of
.Nm
and makefiles, please refer to
.%T "Make \- A Tutorial" .
.Pp
.Nm
will prepend the contents of the
.Va MAKEFLAGS
environment variable to the command line arguments before parsing them.
.Pp
The options are as follows:
.Bl -tag -width Ds
.It Fl B
Try to be backwards compatible by executing a single shell per command and
by executing the commands to make the sources of a dependency line in sequence.
.It Fl D Ar variable
Define
.Ar variable
to be 1, in the global context.
.It Fl d Ar [-]flags
Turn on debugging, and specify which portions of
.Nm
are to print debugging information.
Unless the flags are preceded by
.Ql -
they are added to the
.Va MAKEFLAGS
environment variable and will be processed by any child make processes.
By default, debugging information is printed to standard error,
but this can be changed using the
.Ar F
debugging flag.
The debugging output is always unbuffered; in addition, if debugging
is enabled but debugging output is not directed to standard output,
then the standard output is line buffered.
.Ar Flags
is one or more of the following:
.Bl -tag -width Ds
.It Ar A
Print all possible debugging information;
equivalent to specifying all of the debugging flags.
.It Ar a
Print debugging information about archive searching and caching.
.It Ar c
Print debugging information about conditional evaluation.
.It Ar d
Print debugging information about directory searching and caching.
.It Ar e
Print debugging information about failed commands and targets.
.It Ar F Ns Oo Sy \&+ Oc Ns Ar filename
Specify where debugging output is written.
This must be the last flag, because it consumes the remainder of
the argument.
If the character immediately after the
.Ql F
flag is
.Ql \&+ ,
then the file will be opened in append mode;
otherwise the file will be overwritten.
If the file name is
.Ql stdout
or
.Ql stderr
then debugging output will be written to the
standard output or standard error output file descriptors respectively
(and the
.Ql \&+
option has no effect).
Otherwise, the output will be written to the named file.
If the file name ends
.Ql .%d
then the
.Ql %d
is replaced by the pid.
.It Ar f
Print debugging information about loop evaluation.
.It Ar "g1"
Print the input graph before making anything.
.It Ar "g2"
Print the input graph after making everything, or before exiting
on error.
.It Ar "g3"
Print the input graph before exiting on error.
.It Ar j
Print debugging information about running multiple shells.
.It Ar l
Print commands in Makefiles regardless of whether or not they are prefixed by
.Ql @
or other "quiet" flags.
Also known as "loud" behavior.
.It Ar m
Print debugging information about making targets, including modification
dates.
.It Ar n
Don't delete the temporary command scripts created in
.Pa /tmp
when running commands.
These are created via
.Xr mkstemp 3
and have names of the form
.Pa /tmp/makeXXXXX .
.Em NOTE :
This can create many file in
.Pa /tmp
so use with care.
.It Ar p
Print debugging information about makefile parsing.
.It Ar s
Print debugging information about suffix-transformation rules.
.It Ar t
Print debugging information about target list maintenance.
.It Ar v
Print debugging information about variable assignment.
.It Ar x
Run shell commands with
.Fl x
so the actual commands are printed as they are executed.
.El
.It Fl e
Specify that environment variables override macro assignments within
makefiles.
.It Fl f Ar makefile
Specify a makefile to read instead of the default
.Ql Pa makefile .
If
.Ar makefile
is
.Ql Fl ,
standard input is read.
Multiple makefiles may be specified, and are read in the order specified.
.It Fl I Ar directory
Specify a directory in which to search for makefiles and included makefiles.
The system makefile directory (or directories, see the
.Fl m
option) is automatically included as part of this list.
.It Fl i
Ignore non-zero exit of shell commands in the makefile.
Equivalent to specifying
.Ql Fl
before each command line in the makefile.
.It Fl J Ar private
This option should
.Em not
be specified by the user.
.Pp
When the
.Ar j
option is in use in a recursive build, this option is passed by a make
to child makes to allow all the make processes in the build to
cooperate to avoid overloading the system.
.It Fl j Ar max_jobs
Specify the maximum number of jobs that
.Nm
may have running at any one time.
Turns compatibility mode off, unless the
.Ar B
flag is also specified.
.It Fl k
Continue processing after errors are encountered, but only on those targets
that do not depend on the target whose creation caused the error.
.It Fl m Ar directory
Specify a directory in which to search for sys.mk and makefiles included
via the
.Ao Ar file Ac Ns -style
include statement.
The
.Fl m
option can be used multiple times to form a search path.
This path will override the default system include path: /usr/share/mk.
Furthermore the system include path will be appended to the search path used
for
.Qo Ar file Qc Ns -style
include statements (see the
.Fl I
option).
.Pp
If a file or directory name in the
.Fl m
argument (or the
.Ev MAKESYSPATH
environment variable) starts with the string
.Qq \&.../
then
.Nm
will search for the specified file or directory named in the remaining part
of the argument string.
The search starts with the current directory of
the Makefile and then works upward towards the root of the filesystem.
If the search is successful, then the resulting directory replaces the
.Qq \&.../
specification in the
.Fl m
argument.
If used, this feature allows
.Nm
to easily search in the current source tree for customized sys.mk files
(e.g., by using
.Qq \&.../mk/sys.mk
as an argument).
.It Fl n
Display the commands that would have been executed, but do not
actually execute them unless the target depends on the .MAKE special
source (see below).
.It Fl N
Display the commands which would have been executed, but do not
actually execute any of them; useful for debugging top-level makefiles
without descending into subdirectories.
.It Fl q
Do not execute any commands, but exit 0 if the specified targets are
up-to-date and 1, otherwise.
.It Fl r
Do not use the built-in rules specified in the system makefile.
.It Fl s
Do not echo any commands as they are executed.
Equivalent to specifying
.Ql Ic @
before each command line in the makefile.
.It Fl T Ar tracefile
When used with the
.Fl j
flag,
append a trace record to
.Ar tracefile
for each job started and completed.
.It Fl t
Rather than re-building a target as specified in the makefile, create it
or update its modification time to make it appear up-to-date.
.It Fl V Ar variable
Print
.Nm Ns 's
idea of the value of
.Ar variable ,
in the global context.
Do not build any targets.
Multiple instances of this option may be specified;
the variables will be printed one per line,
with a blank line for each null or undefined variable.
If
.Ar variable
contains a
.Ql \&$
then the value will be expanded before printing.
.It Fl W
Treat any warnings during makefile parsing as errors.
.It Fl X
Don't export variables passed on the command line to the environment
individually.
Variables passed on the command line are still exported
via the
.Va MAKEFLAGS
environment variable.
This option may be useful on systems which have a small limit on the
size of command arguments.
.It Ar variable=value
Set the value of the variable
.Ar variable
to
.Ar value .
Normally, all values passed on the command line are also exported to
sub-makes in the environment.
The
.Fl X
flag disables this behavior.
Variable assignments should follow options for POSIX compatibility
but no ordering is enforced.
.El
.Pp
There are seven different types of lines in a makefile: file dependency
specifications, shell commands, variable assignments, include statements,
conditional directives, for loops, and comments.
.Pp
In general, lines may be continued from one line to the next by ending
them with a backslash
.Pq Ql \e .
The trailing newline character and initial whitespace on the following
line are compressed into a single space.
.Sh FILE DEPENDENCY SPECIFICATIONS
Dependency lines consist of one or more targets, an operator, and zero
or more sources.
This creates a relationship where the targets
.Dq depend
on the sources
and are usually created from them.
The exact relationship between the target and the source is determined
by the operator that separates them.
The three operators are as follows:
.Bl -tag -width flag
.It Ic \&:
A target is considered out-of-date if its modification time is less than
those of any of its sources.
Sources for a target accumulate over dependency lines when this operator
is used.
The target is removed if
.Nm
is interrupted.
.It Ic \&!
Targets are always re-created, but not until all sources have been
examined and re-created as necessary.
Sources for a target accumulate over dependency lines when this operator
is used.
The target is removed if
.Nm
is interrupted.
.It Ic \&::
If no sources are specified, the target is always re-created.
Otherwise, a target is considered out-of-date if any of its sources has
been modified more recently than the target.
Sources for a target do not accumulate over dependency lines when this
operator is used.
The target will not be removed if
.Nm
is interrupted.
.El
.Pp
Targets and sources may contain the shell wildcard values
.Ql \&? ,
.Ql * ,
.Ql [] ,
and
.Ql {} .
The values
.Ql \&? ,
.Ql * ,
and
.Ql []
may only be used as part of the final
component of the target or source, and must be used to describe existing
files.
The value
.Ql {}
need not necessarily be used to describe existing files.
Expansion is in directory order, not alphabetically as done in the shell.
.Sh SHELL COMMANDS
Each target may have associated with it a series of shell commands, normally
used to create the target.
Each of the commands in this script
.Em must
be preceded by a tab.
While any target may appear on a dependency line, only one of these
dependencies may be followed by a creation script, unless the
.Ql Ic \&::
operator is used.
.Pp
If the first characters of the command line are any combination of
.Ql Ic @ ,
.Ql Ic + ,
or
.Ql Ic \- ,
the command is treated specially.
A
.Ql Ic @
causes the command not to be echoed before it is executed.
A
.Ql Ic +
causes the command to be executed even when
.Fl n
is given.
This is similar to the effect of the .MAKE special source,
except that the effect can be limited to a single line of a script.
A
.Ql Ic \-
causes any non-zero exit status of the command line to be ignored.
.Sh VARIABLE ASSIGNMENTS
Variables in make are much like variables in the shell, and, by tradition,
consist of all upper-case letters.
.Ss Variable assignment modifiers
The five operators that can be used to assign values to variables are as
follows:
.Bl -tag -width Ds
.It Ic \&=
Assign the value to the variable.
Any previous value is overridden.
.It Ic \&+=
Append the value to the current value of the variable.
.It Ic \&?=
Assign the value to the variable if it is not already defined.
.It Ic \&:=
Assign with expansion, i.e. expand the value before assigning it
to the variable.
Normally, expansion is not done until the variable is referenced.
.Em NOTE :
References to undefined variables are
.Em not
expanded.
This can cause problems when variable modifiers are used.
.It Ic \&!=
Expand the value and pass it to the shell for execution and assign
the result to the variable.
Any newlines in the result are replaced with spaces.
.El
.Pp
Any white-space before the assigned
.Ar value
is removed; if the value is being appended, a single space is inserted
between the previous contents of the variable and the appended value.
.Pp
Variables are expanded by surrounding the variable name with either
curly braces
.Pq Ql {}
or parentheses
.Pq Ql ()
and preceding it with
a dollar sign
.Pq Ql \&$ .
If the variable name contains only a single letter, the surrounding
braces or parentheses are not required.
This shorter form is not recommended.
.Pp
Variable substitution occurs at two distinct times, depending on where
the variable is being used.
Variables in dependency lines are expanded as the line is read.
Variables in shell commands are expanded when the shell command is
executed.
.Ss Variable classes
The four different classes of variables (in order of increasing precedence)
are:
.Bl -tag -width Ds
.It Environment variables
Variables defined as part of
.Nm Ns 's
environment.
.It Global variables
Variables defined in the makefile or in included makefiles.
.It Command line variables
Variables defined as part of the command line.
.It Local variables
Variables that are defined specific to a certain target.
The seven local variables are as follows:
.Bl -tag -width ".ARCHIVE"
.It Va .ALLSRC
The list of all sources for this target; also known as
.Ql Va \&\*[Gt] .
.It Va .ARCHIVE
The name of the archive file.
.It Va .IMPSRC
In suffix-transformation rules, the name/path of the source from which the
target is to be transformed (the
.Dq implied
source); also known as
.Ql Va \&\*[Lt] .
It is not defined in explicit rules.
.It Va .MEMBER
The name of the archive member.
.It Va .OODATE
The list of sources for this target that were deemed out-of-date; also
known as
.Ql Va \&? .
.It Va .PREFIX
The file prefix of the file, containing only the file portion, no suffix
or preceding directory components; also known as
.Ql Va * .
.It Va .TARGET
The name of the target; also known as
.Ql Va @ .
.El
.Pp
The shorter forms
.Ql Va @ ,
.Ql Va \&? ,
.Ql Va \&\*[Lt] ,
.Ql Va \&\*[Gt] ,
and
.Ql Va *
are permitted for backward
compatibility with historical makefiles and are not recommended.
The six variables
.Ql Va "@F" ,
.Ql Va "@D" ,
.Ql Va "\*[Lt]F" ,
.Ql Va "\*[Lt]D" ,
.Ql Va "*F" ,
and
.Ql Va "*D"
are permitted for compatibility with
.At V
makefiles and are not recommended.
.Pp
Four of the local variables may be used in sources on dependency lines
because they expand to the proper value for each target on the line.
These variables are
.Ql Va .TARGET ,
.Ql Va .PREFIX ,
.Ql Va .ARCHIVE ,
and
.Ql Va .MEMBER .
.El
.Ss Additional built-in variables
In addition,
.Nm
sets or knows about the following variables:
.Bl -tag -width .MAKEOVERRIDES
.It Va \&$
A single dollar sign
.Ql \&$ ,
i.e.
.Ql \&$$
expands to a single dollar
sign.
.It Va .ALLTARGETS
The list of all targets encountered in the Makefile.
If evaluated during
Makefile parsing, lists only those targets encountered thus far.
.It Va .CURDIR
A path to the directory where
.Nm
was executed.
Refer to the description of
.Ql Ev PWD
for more details.
.It Ev MAKE
The name that
.Nm
was executed with
.Pq Va argv[0] .
For compatibility
.Nm
also sets
.Va .MAKE
with the same value.
The preferred variable to use is the environment variable
.Ev MAKE
because it is more compatible with other versions of
.Nm
and cannot be confused with the special target with the same name.
.It Va .MAKE.EXPORTED
The list of variables exported by
.Nm .
.It Va .MAKE.MAKEFILES
The list of makefiles read by
.Nm ,
which is useful for tracking dependencies.
Each makefile is recorded only once, regardless of the number of times read.
.It Va .MAKE.PID
The process-id of
.Nm .
.It Va .MAKE.PPID
The parent process-id of
.Nm .
.It Va .MAKE.JOB.PREFIX
If
.Nm
is run with
.Ar j
then output for each target is prefixed with a token
.Ql --- target ---
the first part of which can be controlled via
.Va .MAKE.JOB.PREFIX .
.br
For example:
.Li .MAKE.JOB.PREFIX=${.newline}---${.MAKE:T}[${.MAKE.PID}]
would produce tokens like
.Ql ---make[1234] target ---
making it easier to track the degree of parallelism being achieved.
.It Ev MAKEFLAGS
The environment variable
.Ql Ev MAKEFLAGS
may contain anything that
may be specified on
.Nm Ns 's
command line.
Anything specified on
.Nm Ns 's
command line is appended to the
.Ql Ev MAKEFLAGS
variable which is then
entered into the environment for all programs which
.Nm
executes.
.It Va .MAKEOVERRIDES
This variable is used to record the names of variables assigned to
on the command line, so that they may be exported as part of
.Ql Ev MAKEFLAGS .
This behaviour can be disabled by assigning an empty value to
.Ql Va .MAKEOVERRIDES
within a makefile.
Extra variables can be exported from a makefile
by appending their names to
.Ql Va .MAKEOVERRIDES .
.Ql Ev MAKEFLAGS
is re-exported whenever
.Ql Va .MAKEOVERRIDES
is modified.
.It Va MAKE_PRINT_VAR_ON_ERROR
When
.Nm
stops due to an error, it prints its name and the value of
.Ql Va .CURDIR
as well as the value of any variables named in
.Ql Va MAKE_PRINT_VAR_ON_ERROR .
.It Va .newline
This variable is simply assigned a newline character as its value.
This allows expansions using the
.Cm \&:@
modifier to put a newline between
iterations of the loop rather than a space.
For example, the printing of
.Ql Va MAKE_PRINT_VAR_ON_ERROR
could be done as ${MAKE_PRINT_VAR_ON_ERROR:@v@$v='${$v}'${.newline}@}.
.It Va .OBJDIR
A path to the directory where the targets are built.
Its value is determined by trying to
.Xr chdir 2
to the following directories in order and using the first match:
.Bl -enum
.It
.Ev ${MAKEOBJDIRPREFIX}${.CURDIR}
.Pp
(Only if
.Ql Ev MAKEOBJDIRPREFIX
is set in the environment or on the command line.)
.It
.Ev ${MAKEOBJDIR}
.Pp
(Only if
.Ql Ev MAKEOBJDIR
is set in the environment or on the command line.)
.It
.Ev ${.CURDIR} Ns Pa /obj. Ns Ev ${MACHINE}
.It
.Ev ${.CURDIR} Ns Pa /obj
.It
.Pa /usr/obj/ Ns Ev ${.CURDIR}
.It
.Ev ${.CURDIR}
.El
.Pp
Variable expansion is performed on the value before it's used,
so expressions such as
.Dl ${.CURDIR:C,^/usr/src,/var/obj,}
may be used.
.Pp
.Ql Va .OBJDIR
may be modified in the makefile as a global variable.
In all cases,
.Nm
will
.Xr chdir 2
to
.Ql Va .OBJDIR
and set
.Ql Ev PWD
to that directory before executing any targets.
.
.It Va .PARSEDIR
A path to the directory of the current
.Ql Pa Makefile
being parsed.
.It Va .PARSEFILE
The basename of the current
.Ql Pa Makefile
being parsed.
This variable and
.Ql Va .PARSEDIR
are both set only while the
.Ql Pa Makefiles
are being parsed.
.It Va .PATH
A variable that represents the list of directories that
.Nm
will search for files.
The search list should be updated using the target
.Ql Va .PATH
rather than the variable.
.It Ev PWD
Alternate path to the current directory.
.Nm
normally sets
.Ql Va .CURDIR
to the canonical path given by
.Xr getcwd 3 .
However, if the environment variable
.Ql Ev PWD
is set and gives a path to the current directory, then
.Nm
sets
.Ql Va .CURDIR
to the value of
.Ql Ev PWD
instead.
This behaviour is disabled if
.Ql Ev MAKEOBJDIRPREFIX
is set or
.Ql Ev MAKEOBJDIR
contains a variable transform.
.Ql Ev PWD
is set to the value of
.Ql Va .OBJDIR
for all programs which
.Nm
executes.
.It Ev VPATH
Colon-separated
.Pq Dq \&:
lists of directories that
.Nm
will search for files.
The variable is supported for compatibility with old make programs only,
use
.Ql Va .PATH
instead.
.El
.Ss Variable modifiers
Variable expansion may be modified to select or modify each word of the
variable (where a
.Dq word
is white-space delimited sequence of characters).
The general format of a variable expansion is as follows:
.Pp
.Dl ${variable[:modifier[:...]]}
.Pp
Each modifier begins with a colon,
which may be escaped with a backslash
.Pq Ql \e .
.Pp
A set of modifiers can be specified via a variable, as follows:
.Pp
.Dl modifier_variable=modifier[:...]
.Dl ${variable:${modifier_variable}[:...]}
.Pp
In this case the first modifier in the modifier_variable does not
start with a colon, since that must appear in the referencing
variable.
If any of the modifiers in the modifier_variable contain a dollar sign
.Pq Ql $ ,
these must be doubled to avoid early expansion.
.Pp
The supported modifiers are:
.Bl -tag -width EEE
.It Cm \&:E
Replaces each word in the variable with its suffix.
.It Cm \&:H
Replaces each word in the variable with everything but the last component.
.It Cm \&:M Ns Ar pattern
Select only those words that match
.Ar pattern .
The standard shell wildcard characters
.Pf ( Ql * ,
.Ql \&? ,
and
.Ql Op )
may
be used.
The wildcard characters may be escaped with a backslash
.Pq Ql \e .
.It Cm \&:N Ns Ar pattern
This is identical to
.Ql Cm \&:M ,
but selects all words which do not match
.Ar pattern .
.It Cm \&:O
Order every word in variable alphabetically.
To sort words in
reverse order use the
.Ql Cm \&:O:[-1..1]
combination of modifiers.
.It Cm \&:Ox
Randomize words in variable.
The results will be different each time you are referring to the
modified variable; use the assignment with expansion
.Pq Ql Cm \&:=
to prevent such behaviour.
For example,
.Bd -literal -offset indent
LIST=			uno due tre quattro
RANDOM_LIST=		${LIST:Ox}
STATIC_RANDOM_LIST:=	${LIST:Ox}

all:
	@echo "${RANDOM_LIST}"
	@echo "${RANDOM_LIST}"
	@echo "${STATIC_RANDOM_LIST}"
	@echo "${STATIC_RANDOM_LIST}"
.Ed
may produce output similar to:
.Bd -literal -offset indent
quattro due tre uno
tre due quattro uno
due uno quattro tre
due uno quattro tre
.Ed
.It Cm \&:Q
Quotes every shell meta-character in the variable, so that it can be passed
safely through recursive invocations of
.Nm .
.It Cm \&:R
Replaces each word in the variable with everything but its suffix.
.It Cm \&:tl
Converts variable to lower-case letters.
.It Cm \&:ts Ns Ar c
Words in the variable are normally separated by a space on expansion.
This modifier sets the separator to the character
.Ar c .
If
.Ar c
is omitted, then no separator is used.
.It Cm \&:tu
Converts variable to upper-case letters.
.It Cm \&:tW
Causes the value to be treated as a single word
(possibly containing embedded white space).
See also
.Ql Cm \&:[*] .
.It Cm \&:tw
Causes the value to be treated as a sequence of
words delimited by white space.
See also
.Ql Cm \&:[@] .
.Sm off
.It Cm \&:S No \&/ Ar old_string Xo
.No \&/ Ar new_string
.No \&/ Op Cm 1gW
.Xc
.Sm on
Modify the first occurrence of
.Ar old_string
in the variable's value, replacing it with
.Ar new_string .
If a
.Ql g
is appended to the last slash of the pattern, all occurrences
in each word are replaced.
If a
.Ql 1
is appended to the last slash of the pattern, only the first word
is affected.
If a
.Ql W
is appended to the last slash of the pattern,
then the value is treated as a single word
(possibly containing embedded white space).
If
.Ar old_string
begins with a caret
.Pq Ql ^ ,
.Ar old_string
is anchored at the beginning of each word.
If
.Ar old_string
ends with a dollar sign
.Pq Ql \&$ ,
it is anchored at the end of each word.
Inside
.Ar new_string ,
an ampersand
.Pq Ql \*[Am]
is replaced by
.Ar old_string
(without any
.Ql ^
or
.Ql \&$ ) .
Any character may be used as a delimiter for the parts of the modifier
string.
The anchoring, ampersand and delimiter characters may be escaped with a
backslash
.Pq Ql \e .
.Pp
Variable expansion occurs in the normal fashion inside both
.Ar old_string
and
.Ar new_string
with the single exception that a backslash is used to prevent the expansion
of a dollar sign
.Pq Ql \&$ ,
not a preceding dollar sign as is usual.
.Sm off
.It Cm \&:C No \&/ Ar pattern Xo
.No \&/ Ar replacement
.No \&/ Op Cm 1gW
.Xc
.Sm on
The
.Cm \&:C
modifier is just like the
.Cm \&:S
modifier except that the old and new strings, instead of being
simple strings, are a regular expression (see
.Xr regex 3 )
string
.Ar pattern
and an
.Xr ed 1 Ns \-style
string
.Ar replacement .
Normally, the first occurrence of the pattern
.Ar pattern
in each word of the value is substituted with
.Ar replacement .
The
.Ql 1
modifier causes the substitution to apply to at most one word; the
.Ql g
modifier causes the substitution to apply to as many instances of the
search pattern
.Ar pattern
as occur in the word or words it is found in; the
.Ql W
modifier causes the value to be treated as a single word
(possibly containing embedded white space).
Note that
.Ql 1
and
.Ql g
are orthogonal; the former specifies whether multiple words are
potentially affected, the latter whether multiple substitutions can
potentially occur within each affected word.
.It Cm \&:T
Replaces each word in the variable with its last component.
.It Cm \&:u
Remove adjacent duplicate words (like
.Xr uniq 1 ) .
.Sm off
.It Cm \&:\&? Ar true_string Cm \&: Ar false_string
.Sm on
If the variable (actually an expression; see below)
evaluates to true, return as its value the
.Ar true_string ,
otherwise return the
.Ar false_string .
The expression parser needs careful feeding to avoid surprises.
For example the following all do what one might expect,
.Dl ${"${NUMBERS:M42}":?match:no}
.Dl ${${NUMBER:U0} > 0:?set:zero}
.Dl ${empty(NUMBER):?empty:set}
The first case expands to
.Ql match
if
.Dv NUMBERS
contains the value 42 (the quotes are important).
The second expands to
.Ql zero
unless
.Dv NUMBER
is set to a value greater than 0.
The last case expands to
.Ql empty
or
.Ql set
depending on whether
.Dv NUMBER
is empty.
In this example, use of
.Ql {}
rather than
.Ql ()
is important to avoid the parser getting confused.
By contrast, the following examples will
.Em not
behave as expected.
.Dl ${"1 < 0":?always:no}
.Dl ${NUMBERS:M42:?always:no}
in both cases the expansion will always be
.Ql always .
.It Ar :old_string=new_string
This is the
.At V
style variable substitution.
It must be the last modifier specified.
If
.Ar old_string
or
.Ar new_string
do not contain the pattern matching character
.Ar %
then it is assumed that they are
anchored at the end of each word, so only suffixes or entire
words may be replaced.
Otherwise
.Ar %
is the substring of
.Ar old_string
to be replaced in
.Ar new_string .
.Pp
Variable expansion occurs in the normal fashion inside both
.Ar old_string
and
.Ar new_string
with the single exception that a backslash is used to prevent the
expansion of a dollar sign
.Pq Ql \&$ ,
not a preceding dollar sign as is usual.
.Sm off
.It Cm \&:@ Ar temp Cm @ Xo
.Ar string Cm @
.Sm on
.Xc
This is the loop expansion mechanism from the OSF Development
Environment (ODE) make.
Unlike
.Cm \&.for
loops expansion occurs at the time of
reference.
Assign
.Ar temp
to each word in the variable and evaluate
.Ar string .
The ODE convention is that
.Ar temp
should start and end with a period.
For example.
.Dl ${LINKS:@.LINK.@${LN} ${TARGET} ${.LINK.}@}
.It Cm \&:U Ns Ar newval
If the variable is undefined
.Ar newval
is the value.
If the variable is defined, the existing value is returned.
This is another ODE make feature.
It is handy for setting per-target CFLAGS for instance:
.Dl ${_${.TARGET:T}_CFLAGS:U${DEF_CFLAGS}}
If a value is only required if the variable is undefined, use:
.Dl ${VAR:D:Unewval}
.It Cm \&:D Ns Ar newval
If the variable is defined
.Ar newval
is the value.
.It Cm \&:L
The name of the variable is the value.
.It Cm \&:P
The path of the node which has the same name as the variable
is the value.
If no such node exists or its path is null, then the
name of the variable is used.
.Sm off
.It Cm \&:\&! Ar cmd Cm \&!
.Sm on
The output of running
.Ar cmd
is the value.
.It Cm \&:sh
If the variable is non-empty it is run as a command and the output
becomes the new value.
.It Cm \&::= Ns Ar str
The variable is assigned the value
.Ar str
after substitution.
This modifier and its variations are useful in
obscure situations such as wanting to apply modifiers to
.Cm \&.for
loop iteration variables which won't work due to the way
.Cm \&.for
loops are implemented.
These assignment modifiers always expand to
nothing, so if appearing in a rule line by themselves should be
preceded with something to keep
.Nm
happy.
As in:
.Bd -literal
use_foo: \&.USE
\&.for i in ${\&.TARGET} ${\&.TARGET:R}\&.gz
	@: ${t::=$i}
	@echo t:R:T=${t:R:T}
\&.endfor

.Ed
The
.Ql Cm \&::
helps avoid false matches with the
.At V
style
.Cm \&:=
modifier and since substitution always occurs the
.Cm \&::=
form is vaguely appropriate.
.It Cm \&::?= Ns Ar str
As for
.Cm \&::=
but only if the variable does not already have a value.
.It Cm \&::+= Ns Ar str
Append
.Ar str
to the variable.
.It Cm \&::!= Ns Ar cmd
Assign the output of
.Ar cmd
to the variable.
.It Cm \&:\&[ Ns Ar range Ns Cm \&]
Selects one or more words from the value,
or performs other operations related to the way in which the
value is divided into words.
.Pp
Ordinarily, a value is treated as a sequence of words
delimited by white space.
Some modifiers suppress this behaviour,
causing a value to be treated as a single word
(possibly containing embedded white space).
An empty value, or a value that consists entirely of white-space,
is treated as a single word.
For the purposes of the
.Ql Cm \&:[]
modifier, the words are indexed both forwards using positive integers
(where index 1 represents the first word),
and backwards using negative integers
(where index -1 represents the last word).
.Pp
The
.Ar range
is subjected to variable expansion, and the expanded result is
then interpreted as follows:
.Bl -tag -width index
.\" :[n]
.It Ar index
Selects a single word from the value.
.\" :[start..end]
.It Ar start Ns Cm \&.. Ns Ar end
Selects all words from
.Ar start
to
.Ar end ,
inclusive.
For example,
.Ql Cm \&:[2..-1]
selects all words from the second word to the last word.
If
.Ar start
is greater than
.Ar end ,
then the words are output in reverse order.
For example,
.Ql Cm \&:[-1..1]
selects all the words from last to first.
.\" :[*]
.It Cm \&*
Causes subsequent modifiers to treat the value as a single word
(possibly containing embedded white space).
Analogous to the effect of
\&"$*\&"
in Bourne shell.
.\" :[0]
.It 0
Means the same as
.Ql Cm \&:[*] .
.\" :[*]
.It Cm \&@
Causes subsequent modifiers to treat the value as a sequence of words
delimited by white space.
Analogous to the effect of
\&"$@\&"
in Bourne shell.
.\" :[#]
.It Cm \&#
Returns the number of words in the value.
.El \" :[range]
.El
.Sh INCLUDE STATEMENTS, CONDITIONALS AND FOR LOOPS
Makefile inclusion, conditional structures and for loops  reminiscent
of the C programming language are provided in
.Nm .
All such structures are identified by a line beginning with a single
dot
.Pq Ql \&.
character.
Files are included with either
.Cm \&.include Aq Ar file
or
.Cm \&.include Pf \*q Ar file Ns \*q .
Variables between the angle brackets or double quotes are expanded
to form the file name.
If angle brackets are used, the included makefile is expected to be in
the system makefile directory.
If double quotes are used, the including makefile's directory and any
directories specified using the
.Fl I
option are searched before the system
makefile directory.
For compatibility with other versions of
.Nm
.Ql include file ...
is also accepted.
If the include statement is written as
.Cm .-include
or as
.Cm .sinclude
then errors locating and/or opening include files are ignored.
.Pp
Conditional expressions are also preceded by a single dot as the first
character of a line.
The possible conditionals are as follows:
.Bl -tag -width Ds
.It Ic .export Ar variable
Export the specified global variable.
If no variable is provided, all globals are exported
except for internal variables (those that start with
.Ql \&.
).
This is not affected by the
.Fl X
flag, so should be used with caution.
Appending a variable name to
.Va .MAKE.EXPORTED
is equivalent to exporting a variable.
.It Ic .undef Ar variable
Un-define the specified global variable.
Only global variables may be un-defined.
.It Xo
.Ic \&.if
.Oo \&! Oc Ns Ar expression
.Op Ar operator expression ...
.Xc
Test the value of an expression.
.It Xo
.Ic .ifdef
.Oo \&! Oc Ns Ar variable
.Op Ar operator variable ...
.Xc
Test the value of a variable.
.It Xo
.Ic .ifndef
.Oo \&! Oc Ns Ar variable
.Op Ar operator variable ...
.Xc
Test the value of a variable.
.It Xo
.Ic .ifmake
.Oo \&! Oc Ns Ar target
.Op Ar operator target ...
.Xc
Test the target being built.
.It Xo
.Ic .ifnmake
.Oo \&! Ns Oc Ar target
.Op Ar operator target ...
.Xc
Test the target being built.
.It Ic .else
Reverse the sense of the last conditional.
.It Xo
.Ic .elif
.Oo \&! Ns Oc Ar expression
.Op Ar operator expression ...
.Xc
A combination of
.Ql Ic .else
followed by
.Ql Ic .if .
.It Xo
.Ic .elifdef
.Oo \&! Oc Ns Ar variable
.Op Ar operator variable ...
.Xc
A combination of
.Ql Ic .else
followed by
.Ql Ic .ifdef .
.It Xo
.Ic .elifndef
.Oo \&! Oc Ns Ar variable
.Op Ar operator variable ...
.Xc
A combination of
.Ql Ic .else
followed by
.Ql Ic .ifndef .
.It Xo
.Ic .elifmake
.Oo \&! Oc Ns Ar target
.Op Ar operator target ...
.Xc
A combination of
.Ql Ic .else
followed by
.Ql Ic .ifmake .
.It Xo
.Ic .elifnmake
.Oo \&! Oc Ns Ar target
.Op Ar operator target ...
.Xc
A combination of
.Ql Ic .else
followed by
.Ql Ic .ifnmake .
.It Ic .endif
End the body of the conditional.
.El
.Pp
The
.Ar operator
may be any one of the following:
.Bl -tag -width "Cm XX"
.It Cm \&|\&|
Logical OR.
.It Cm \&\*[Am]\*[Am]
Logical
.Tn AND ;
of higher precedence than
.Dq \&|\&| .
.El
.Pp
As in C,
.Nm
will only evaluate a conditional as far as is necessary to determine
its value.
Parentheses may be used to change the order of evaluation.
The boolean operator
.Ql Ic \&!
may be used to logically negate an entire
conditional.
It is of higher precedence than
.Ql Ic \&\*[Am]\*[Am] .
.Pp
The value of
.Ar expression
may be any of the following:
.Bl -tag -width defined
.It Ic defined
Takes a variable name as an argument and evaluates to true if the variable
has been defined.
.It Ic make
Takes a target name as an argument and evaluates to true if the target
was specified as part of
.Nm Ns 's
command line or was declared the default target (either implicitly or
explicitly, see
.Va .MAIN )
before the line containing the conditional.
.It Ic empty
Takes a variable, with possible modifiers, and evaluates to true if
the expansion of the variable would result in an empty string.
.It Ic exists
Takes a file name as an argument and evaluates to true if the file exists.
The file is searched for on the system search path (see
.Va .PATH ) .
.It Ic target
Takes a target name as an argument and evaluates to true if the target
has been defined.
.It Ic commands
Takes a target name as an argument and evaluates to true if the target
has been defined and has commands associated with it.
.El
.Pp
.Ar Expression
may also be an arithmetic or string comparison.
Variable expansion is
performed on both sides of the comparison, after which the integral
values are compared.
A value is interpreted as hexadecimal if it is
preceded by 0x, otherwise it is decimal; octal numbers are not supported.
The standard C relational operators are all supported.
If after
variable expansion, either the left or right hand side of a
.Ql Ic ==
or
.Ql Ic "!="
operator is not an integral value, then
string comparison is performed between the expanded
variables.
If no relational operator is given, it is assumed that the expanded
variable is being compared against 0 or an empty string in the case
of a string comparison.
.Pp
When
.Nm
is evaluating one of these conditional expression, and it encounters
a word it doesn't recognize, either the
.Dq make
or
.Dq defined
expression is applied to it, depending on the form of the conditional.
If the form is
.Ql Ic .ifdef
or
.Ql Ic .ifndef ,
the
.Dq defined
expression is applied.
Similarly, if the form is
.Ql Ic .ifmake
or
.Ql Ic .ifnmake , the
.Dq make
expression is applied.
.Pp
If the conditional evaluates to true the parsing of the makefile continues
as before.
If it evaluates to false, the following lines are skipped.
In both cases this continues until a
.Ql Ic .else
or
.Ql Ic .endif
is found.
.Pp
For loops are typically used to apply a set of rules to a list of files.
The syntax of a for loop is:
.Pp
.Bl -tag -compact -width Ds
.It Xo
.Ic \&.for
.Ar variable
.Op Ar variable ...
.Ic in
.Ar expression
.Xc
.It Aq make-rules
.It Ic \&.endfor
.El
.Pp
After the for
.Ic expression
is evaluated, it is split into words.
On each iteration of the loop, one word is taken and assigned to each
.Ic variable ,
in order, and these
.Ic variables
are substituted into the
.Ic make-rules
inside the body of the for loop.
The number of words must come out even; that is, if there are three
iteration variables, the number of words provided must be a multiple
of three.
.Sh COMMENTS
Comments begin with a hash
.Pq Ql \&#
character, anywhere but in a shell
command line, and continue to the end of an unescaped new line.
.Sh SPECIAL SOURCES (ATTRIBUTES)
.Bl -tag -width .IGNOREx
.It Ic .EXEC
Target is never out of date, but always execute commands anyway.
.It Ic .IGNORE
Ignore any errors from the commands associated with this target, exactly
as if they all were preceded by a dash
.Pq Ql \- .
.\" .It Ic .INVISIBLE
.\" XXX
.\" .It Ic .JOIN
.\" XXX
.It Ic .MADE
Mark all sources of this target as being up-to-date.
.It Ic .MAKE
Execute the commands associated with this target even if the
.Fl n
or
.Fl t
options were specified.
Normally used to mark recursive
.Nm Ns 's .
.It Ic .NOPATH
Do not search for the target in the directories specified by
.Ic .PATH .
.It Ic .NOTMAIN
Normally
.Nm
selects the first target it encounters as the default target to be built
if no target was specified.
This source prevents this target from being selected.
.It Ic .OPTIONAL
If a target is marked with this attribute and
.Nm
can't figure out how to create it, it will ignore this fact and assume
the file isn't needed or already exists.
.It Ic .PHONY
The target does not
correspond to an actual file; it is always considered to be out of date,
and will not be created with the
.Fl t
option.
.It Ic .PRECIOUS
When
.Nm
is interrupted, it normally removes any partially made targets.
This source prevents the target from being removed.
.It Ic .RECURSIVE
Synonym for
.Ic .MAKE .
.It Ic .SILENT
Do not echo any of the commands associated with this target, exactly
as if they all were preceded by an at sign
.Pq Ql @ .
.It Ic .USE
Turn the target into
.Nm Ns 's
version of a macro.
When the target is used as a source for another target, the other target
acquires the commands, sources, and attributes (except for
.Ic .USE )
of the
source.
If the target already has commands, the
.Ic .USE
target's commands are appended
to them.
.It Ic .USEBEFORE
Exactly like
.Ic .USE ,
but prepend the
.Ic .USEBEFORE
target commands to the target.
.It Ic .WAIT
If
.Ic .WAIT
appears in a dependency line, the sources that precede it are
made before the sources that succeed it in the line.
Since the dependents of files are not made until the file itself
could be made, this also stops the dependents being built unless they
are needed for another branch of the dependency tree.
So given:
.Bd -literal
x: a .WAIT b
	echo x
a:
	echo a
b: b1
	echo b
b1:
	echo b1

.Ed
the output is always
.Ql b1 ,
.Ql b ,
.Ql a ,
.Ql x .
.br
The ordering imposed by
.Ic .WAIT
is only relevant for parallel makes.
.El
.Sh SPECIAL TARGETS
Special targets may not be included with other targets, i.e. they must be
the only target specified.
.Bl -tag -width .BEGINx
.It Ic .BEGIN
Any command lines attached to this target are executed before anything
else is done.
.It Ic .DEFAULT
This is sort of a
.Ic .USE
rule for any target (that was used only as a
source) that
.Nm
can't figure out any other way to create.
Only the shell script is used.
The
.Ic .IMPSRC
variable of a target that inherits
.Ic .DEFAULT Ns 's
commands is set
to the target's own name.
.It Ic .END
Any command lines attached to this target are executed after everything
else is done.
.It Ic .IGNORE
Mark each of the sources with the
.Ic .IGNORE
attribute.
If no sources are specified, this is the equivalent of specifying the
.Fl i
option.
.It Ic .INTERRUPT
If
.Nm
is interrupted, the commands for this target will be executed.
.It Ic .MAIN
If no target is specified when
.Nm
is invoked, this target will be built.
.It Ic .MAKEFLAGS
This target provides a way to specify flags for
.Nm
when the makefile is used.
The flags are as if typed to the shell, though the
.Fl f
option will have
no effect.
.\" XXX: NOT YET!!!!
.\" .It Ic .NOTPARALLEL
.\" The named targets are executed in non parallel mode.
.\" If no targets are
.\" specified, then all targets are executed in non parallel mode.
.It Ic .NOPATH
Apply the
.Ic .NOPATH
attribute to any specified sources.
.It Ic .NOTPARALLEL
Disable parallel mode.
.It Ic .NO_PARALLEL
Synonym for
.Ic .NOTPARALLEL ,
for compatibility with other pmake variants.
.It Ic .ORDER
The named targets are made in sequence.
This ordering does not add targets to the list of targets to be made.
Since the dependents of a target do not get built until the target itself
could be built, unless
.Ql a
is built by another part of the dependency graph,
the following is a dependency loop:
.Bd -literal
\&.ORDER a b
b: a
.Ed
.Pp
The ordering imposed by
.Ic .ORDER
is only relevant for parallel makes.
.\" XXX: NOT YET!!!!
.\" .It Ic .PARALLEL
.\" The named targets are executed in parallel mode.
.\" If no targets are
.\" specified, then all targets are executed in parallel mode.
.It Ic .PATH
The sources are directories which are to be searched for files not
found in the current directory.
If no sources are specified, any previously specified directories are
deleted.
If the source is the special
.Ic .DOTLAST
target, then the current working
directory is searched last.
.It Ic .PHONY
Apply the
.Ic .PHONY
attribute to any specified sources.
.It Ic .PRECIOUS
Apply the
.Ic .PRECIOUS
attribute to any specified sources.
If no sources are specified, the
.Ic .PRECIOUS
attribute is applied to every
target in the file.
.It Ic .SHELL
Sets the shell that
.Nm
will use to execute commands.
The sources are a set of
.Ar field=value
pairs.
.Bl -tag -width hasErrCtls
.It Ar name
This is the minimal specification, used to select one of the builtin
shell specs;
.Ar sh ,
.Ar ksh ,
and
.Ar csh .
.It Ar path
Specifies the path to the shell.
.It Ar hasErrCtl
Indicates whether the shell supports exit on error.
.It Ar check
The command to turn on error checking.
.It Ar ignore
The command to disable error checking.
.It Ar echo
The command to turn on echoing of commands executed.
.It Ar quiet
The command to turn off echoing of commands executed.
.It Ar filter
The output to filter after issuing the
.Ar quiet
command.
It is typically identical to
.Ar quiet .
.It Ar errFlag
The flag to pass the shell to enable error checking.
.It Ar echoFlag
The flag to pass the shell to enable command echoing.
.It Ar newline
The string literal to pass the shell that results in a single newline
character when used outside of any quoting characters.
.El
Example:
.Bd -literal
\&.SHELL: name=ksh path=/bin/ksh hasErrCtl=true \\
	check="set -e" ignore="set +e" \\
	echo="set -v" quiet="set +v" filter="set +v" \\
	echoFlag=v errFlag=e newline="'\\n'"
.Ed
.It Ic .SILENT
Apply the
.Ic .SILENT
attribute to any specified sources.
If no sources are specified, the
.Ic .SILENT
attribute is applied to every
command in the file.
.It Ic .SUFFIXES
Each source specifies a suffix to
.Nm .
If no sources are specified, any previously specified suffixes are deleted.
It allows the creation of suffix-transformation rules.
.Pp
Example:
.Bd -literal
\&.SUFFIXES: .o
\&.c.o:
	cc -o ${.TARGET} -c ${.IMPSRC}
.Ed
.El
.Sh ENVIRONMENT
.Nm
uses the following environment variables, if they exist:
.Ev MACHINE ,
.Ev MACHINE_ARCH ,
.Ev MAKE ,
.Ev MAKEFLAGS ,
.Ev MAKEOBJDIR ,
.Ev MAKEOBJDIRPREFIX ,
.Ev MAKESYSPATH ,
and
.Ev PWD .
.Pp
.Ev MAKEOBJDIRPREFIX
and
.Ev MAKEOBJDIR
may only be set in the environment or on the command line to
.Nm
and not as makefile variables;
see the description of
.Ql Va .OBJDIR
for more details.
.Sh FILES
.Bl -tag -width /usr/share/mk -compact
.It .depend
list of dependencies
.It Makefile
list of dependencies
.It makefile
list of dependencies
.It sys.mk
system makefile
.It /usr/share/mk
system makefile directory
.El
.Sh COMPATIBILITY
The basic make syntax is compatible between different versions of make,
however the special variables, variable modifiers and conditionals are not.
.Pp
The way that parallel makes are scheduled changed in
.Nx 4.0
so that .ORDER and .WAIT apply recursively to the dependant nodes.
The algorithms used may change again in the future.
.Sh SEE ALSO
.Xr mkdep 1
.Sh HISTORY
A
.Nm
command appeared in
.At v7 .