NetBSD/sys/dev/mii/ihphyreg.h

112 lines
4.3 KiB
C

/* $NetBSD: ihphyreg.h,v 1.1 2010/11/27 20:15:27 christos Exp $ */
/*-
* Copyright (c) 2010 The NetBSD Foundation, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DEV_MII_IHPHYREG_H_
#define _DEV_MII_IHPHYREG_H_
#include <dev/mii/inbmphyreg.h>
/*
* Intel 82577LM registers.
*/
/* PHY Control Register 2 */
#define IHPHY_MII_ECR2 BME1000_REG(0, 18)
/* Loopback Control Register */
#define IHPHY_MII_LCR BME1000_REG(0, 19)
/* RX Error Counter Register */
#define IHPHY_MII_RXERR BME1000_REG(0, 20)
/* Management Interface Register */
#define IHPHY_MII_MIR BME1000_REG(0, 21)
/* PHY Configuration Register */
#define IHPHY_MII_CFG BME1000_REG(0, 22)
#define IHPHY_CFG_TX_CRS 0x8000 /* CRS transmit enable */
#define IHPHY_CFG_FIFO_DEPTH 0x3000 /* Transmit FIFO depth*/
#define IHPHY_CFG_DOWN_SHIFT 0x0C00 /* Automatic speed downshift mode */
#define IHPHY_CFG_ALT_PAGE 0x0080 /* Alternate next page */
#define IHPHY_CFG_GRP_MDIO 0x0040 /* Group MDIO mode enable */
#define IHPHY_CFG_TX_CLOCK 0x0020 /* Transmit clock enable */
/* PHY Control Register */
#define IHPHY_MII_ECR BME1000_REG(0, 23)
#define IHPHY_ECR_LNK_EN 0x2000 /* Link enable */
#define IHPHY_ECR_DOWN_SHIFT 0x1C00 /* Automatic speed downshift attempts */
#define IHPHY_ECR_LNK_PARTNER 0x0080 /* Link Partner Detected */
#define IHPHY_ECR_JABBER 0x0040 /* Jabber (10BASE-T) */
#define IHPHY_ECR_SQE 0x0020 /* Heartbeat (10BASE-T) */
#define IHPHY_ECR_TP_LOOPBACK 0x0010 /* TP loopback (10BASE-T) */
#define IHPHY_ECR_PRE_LENGTH 0x000C /* Preamble length (10BASE-T) */
/* Interrupt Mask Register */
#define IHPHY_MII_IMR BME1000_REG(0, 24)
/* Interrupt Status Register */
#define IHPHY_MII_ISR BME1000_REG(0, 25)
/* PHY Status Register */
#define IHPHY_MII_ESR BME1000_REG(0, 26)
#define IHPHY_ESR_STANDBY 0x8000 /* PHY in standby */
#define IHPHY_ESR_ANEG_FAULT 0x6000 /* Autonegotation fault status */
#define IHPHY_ESR_ANEG_STAT 0x1000 /* Autonegotiation status */
#define IHPHY_ESR_PAIR_SWAP 0x0800 /* Pair swap on pairs A and B */
#define IHPHY_ESR_POLARITY 0x0400 /* Polarity status */
#define IHPHY_ESR_SPEED 0x0300 /* Speed status */
#define IHPHY_ESR_DUPLEX 0x0080 /* Duplex status */
#define IHPHY_ESR_LINK 0x0040 /* Link status */
#define IHPHY_ESR_TRANSMIT 0x0020 /* Transmit status */
#define IHPHY_ESR_RECEIVE 0x0010 /* Receive status */
#define IHPHY_ESR_COLLISION 0x0008 /* Collision status */
#define IHPHY_ESR_ANEG_BOTH 0x0004 /* Autonegotiation enabled for both */
#define IHPHY_ESR_PAUSE 0x0002 /* Link partner has PAUSE */
#define IHPHY_ESR_ASYM_PAUSE 0x0001 /* Link partner has asymmetric PAUSE */
#define IHPHY_SPEED_10 0x0000
#define IHPHY_SPEED_100 0x0100
#define IHPHY_SPEED_1000 0x0200
/* LED Control Register 1 */
#define IHPHY_MII_LED1 BME1000_REG(0, 27)
/* LED Control Register 2 */
#define IHPHY_MII_LED2 BME1000_REG(0, 28)
/* LED Control Register 3 */
#define IHPHY_MII_LED3 BME1000_REG(0, 29)
/* Diagnostics Control Register */
#define IHPHY_MII_DCR BME1000_REG(0, 30)
/* Diagnostics Status Register */
#define IHPHY_MII_DSR BME1000_REG(0, 31)
#endif /* _DEV_IHPHY_MIIREG_H_ */