NetBSD/sys/dev/ic/nslm7xvar.h
ad 5a728ace12 Changes for SMBus/I2C:
- Move lm_readreg/lm_writereg into the front-ends. Add/use function pointers
  in the softc.
- Add a bank select function pointer to the softc and provide a generic
  version. WinBond chips accessed over serial bus present three addresses,
  two of which are used to access bank 1/2 registers.
- Mark TSENS2/3 sensor data as invalid if the the corresponding bank select
  fails.
2002-11-15 14:55:41 +00:00

144 lines
4.9 KiB
C

/* $NetBSD: nslm7xvar.h,v 1.10 2002/11/15 14:55:42 ad Exp $ */
/*-
* Copyright (c) 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Bill Squier.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DEV_ISA_NSLM7XVAR_H_
#define _DEV_ISA_NSLM7XVAR_H_
/* ctl registers */
#define LMC_ADDR 0x05
#define LMC_DATA 0x06
/* data registers */
#define LMD_SENSORBASE 0x20 /* Sensors occupy 0x20 -- 0x2a */
#define LMD_CONFIG 0x40 /* Configuration */
#define LMD_ISR1 0x41 /* Interrupt Status 1 */
#define LMD_ISR2 0x42 /* Interrupt Status 2 */
#define LMD_SMI1 0x43 /* SMI Mask 1 */
#define LMD_SMI2 0x44 /* SMI Mask 2 */
#define LMD_NMI1 0x45 /* NMI Mask 1 */
#define LMD_NMI2 0x46 /* NMI Mask 2 */
#define LMD_VIDFAN 0x47 /* VID/Fan Divisor */
#define LMD_SBUSADDR 0x48 /* Serial Bus Address */
#define LMD_CHIPID 0x49 /* Chip Reset/ID */
/* misc constants */
#define LM_NUM_SENSORS 11
#define LM_ID_LM78 0x00
#define LM_ID_LM78J 0x40
#define LM_ID_LM79 0xC0
#define LM_ID_LM81 0x80
#define LM_ID_MASK 0xFE
/*
* additionnal registers for the Winbond chips:
* WB83781D: mostly lm7x compatible; extra temp sensors in bank1 & 2
* WB83782D & WB83627HF: voltage sensors needs different handling, more FAN
* dividers; mode voltage sensors, more temp sensors.
*/
#define WB_T23ADDR 0x4A /* temp sens 2/3 I2C addr */
#define WB_PIN 0x4B /* pin & fan3 divider */
#define WB_BANKSEL 0x4E /* banck select register */
#define WB_BANKSEL_B0 0x00 /* select bank 0 */
#define WB_BANKSEL_B1 0x01 /* select bank 1 */
#define WB_BANKSEL_B2 0x02 /* select bank 2 */
#define WB_BANKSEL_B3 0x03 /* select bank 3 */
#define WB_BANKSEL_B4 0x04 /* select bank 4 */
#define WB_BANKSEL_B5 0x05 /* select bank 5 */
#define WB_BANKSEL_HBAC 0x80 /* hight byte access */
#define WB_VENDID 0x4F /* vendor ID register */
#define WB_VENDID_WINBOND 0x5CA3
/* Bank0 regs */
#define WB_BANK0_CHIPID 0x58
#define WB_CHIPID_83781 0x10
#define WB_CHIPID_83781_2 0x11
#define WB_CHIPID_83782 0x30
#define WB_CHIPID_83627 0x21
#define WB_CHIPID_83697 0x60
#define WB_BANK0_FANBAT 0x5D
/* Bank1 regs */
#define WB_BANK1_T2H 0x50
#define WB_BANK1_T2L 0x51
/* Bank2 regs */
#define WB_BANK2_T3H 0x50
#define WB_BANK2_T3L 0x51
/* Bank4 regs 83782/83627 only */
#define WB_BANK4_T1OFF 0x54
#define WB_BANK4_T2OFF 0x55
#define WB_BANK4_T3OFF 0x56
/* Bank5 regs 83782/83627 only */
#define WB_BANK5_5VSB 0x50
#define WB_BANK5_VBAT 0x51
#define WB83781_NUM_SENSORS 13
#define WB83697_NUM_SENSORS 14
#define WB_NUM_SENSORS 15
struct lm_softc {
struct device sc_dev;
int lm_iobase;
bus_space_tag_t lm_iot;
bus_space_handle_t lm_ioh;
int sc_flags;
struct timeval lastread; /* only allow reads every 1.5 seconds */
struct envsys_tre_data sensors[WB_NUM_SENSORS];
struct envsys_basic_info info[WB_NUM_SENSORS];
u_int numsensors;
void (*refresh_sensor_data) __P((struct lm_softc *));
int (*lm_banksel)(struct lm_softc *, int);
u_int8_t (*lm_readreg)(struct lm_softc *, int);
void (*lm_writereg)(struct lm_softc *, int, int);
struct sysmon_envsys sc_sysmon;
};
void lm_attach __P((struct lm_softc *));
int lm_probe __P((bus_space_tag_t, bus_space_handle_t));
#endif /* _DEV_ISA_NSLM7XVAR_H_ */