NetBSD/sys/dev/ppbus/ppbus_base.h
2005-02-27 00:26:58 +00:00

163 lines
5.6 KiB
C

/* $NetBSD: ppbus_base.h,v 1.4 2005/02/27 00:27:44 perry Exp $ */
/*
* Copyright (c) 1997, 1998, 1999 Nicolas Souchu
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD: src/sys/dev/ppbus/ppbconf.h,v 1.17.2.1 2000/05/24 00:20:57 n_hibma Exp $
*
*/
#ifndef __PPBUS_BASE_H
#define __PPBUS_BASE_H
#include <machine/bus.h>
#include <dev/ppbus/ppbus_msq.h>
/* Parallel Port Chipset control bits. */
#define STROBE 0x01
#define AUTOFEED 0x02
#define nINIT 0x04
#define SELECTIN 0x08
#define IRQENABLE 0x10
#define PCD 0x20
#define nSTROBE inv(STROBE)
#define nAUTOFEED inv(AUTOFEED)
#define INIT inv(nINIT)
#define nSELECTIN inv(SELECTIN)
#define nPCD inv(PCD)
/* Parallel Port Chipset status bits. */
#define TIMEOUT 0x01
#define nFAULT 0x08
#define SELECT 0x10
#define PERROR 0x20
#define nACK 0x40
#define nBUSY 0x80
/* Byte mode signals */
#define HOSTCLK nSTROBE /* Also ECP mode signal */
#define HOSTBUSY nAUTOFEED
#define ACTIVE1284 nSELECTIN /* Also ECP mode signal */
#define PTRCLK nACK
#define PTRBUSY BUSY
#define ACKDATAREQ PERROR
#define XFLAG SELECT /* Also ECP mode signal */
#define nDATAVAIL nERROR
/* ECP mode signals */
#define HOSTACK nAUTOFEED
#define nREVREQ nINIT
#define PERICLK nACK
#define PERIACK BUSY
#define nACKREV PERROR
#define nPERIREQ nERROR
/* EPP mode signals */
#define nWRITE nSTROBE
#define nDATASTB nAUTOFEED
#define nADDRSTB nSELECTIN
#define nWAIT BUSY
/*
#define nINIT nRESET
#define nACK nINTR
*/
/* ECR register bit definitions */
#define ECR_FIFO_EMPTY 0x1 /* ecr register - bit 0 */
#define ECR_FIFO_FULL 0x2 /* ecr register - bit 1 */
#define ECR_SERVICE_INTR 0x4 /* ecr register - bit 2 */
#define ECR_ENABLE_DMA 0x8 /* ecr register - bit 3 */
#define ECR_nFAULT_INTR 0x10 /* ecr register - bit 4 */
/* bits 5 through 7 */
#define ECR_STD 0x00 /* Standard mode */
#define ECR_PS2 0x20 /* Bidirectional mode */
#define ECR_FIFO 0x40 /* Fast Centronics mode */
#define ECR_ECP 0x60 /* ECP mode */
#define ECR_EPP 0x80 /* EPP mode */
#define ECR_TST 0xc0 /* Test mode*/
/* Used for IEEE 1284 'PNP' detection */
#define PPBUS_PNP_PRINTER 0
#define PPBUS_PNP_MODEM 1
#define PPBUS_PNP_NET 2
#define PPBUS_PNP_HDC 3
#define PPBUS_PNP_PCMCIA 4
#define PPBUS_PNP_MEDIA 5
#define PPBUS_PNP_FDC 6
#define PPBUS_PNP_PORTS 7
#define PPBUS_PNP_SCANNER 8
#define PPBUS_PNP_DIGICAM 9
#define PPBUS_PNP_UNKNOWN 10
/* Structure to store status information. */
struct ppbus_status {
unsigned char status;
unsigned int timeout:1;
unsigned int error:1;
unsigned int select:1;
unsigned int paper_end:1;
unsigned int ack:1;
unsigned int busy:1;
};
/* How tsleep() is called in ppbus_request_bus(). */
#define PPBUS_DONTWAIT 0
#define PPBUS_NOINTR 0
#define PPBUS_WAIT 0x1
#define PPBUS_INTR 0x2
#define PPBUS_POLL 0x4
#define PPBUS_FOREVER -1
/* PPBUS interface functions (includes parport interface) */
int ppbus_scan_bus(struct device *);
void ppbus_pnp_detect(struct device *);
int ppbus_request_bus(struct device *, struct device *, int, unsigned int);
int ppbus_release_bus(struct device *, struct device *, int, unsigned int);
int ppbus_get_status(struct device *, struct ppbus_status *);
int ppbus_poll_bus(struct device *, int, char, char, int);
/* Parport interface function prototypes */
int ppbus_read_ivar(struct device *, int, unsigned int *);
int ppbus_write_ivar(struct device *, int, unsigned int *);
int ppbus_reset_epp_timeout(struct device *);
int ppbus_ecp_sync(struct device *);
int ppbus_set_mode(struct device *, int, int);
int ppbus_get_mode(struct device *);
int ppbus_write(struct device *, char *, int, int, size_t *);
int ppbus_read(struct device *, char *, int, int, size_t *);
int ppbus_exec_microseq(struct device *, struct ppbus_microseq * *);
int ppbus_io(struct device *, int, u_char *, int, u_char);
int ppbus_dma_malloc(struct device *, caddr_t *, bus_addr_t *, bus_size_t);
int ppbus_dma_free(struct device *, caddr_t *, bus_addr_t *, bus_size_t);
int ppbus_add_handler(struct device *, void (*)(void *), void *);
int ppbus_remove_handler(struct device *, void (*)(void *));
#endif /* __PPBUS_BASE_H */