NetBSD/sys/dev/i2o/iopsp.c

675 lines
18 KiB
C

/* $NetBSD: iopsp.c,v 1.4 2001/02/07 17:05:46 ad Exp $ */
/*-
* Copyright (c) 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Andrew Doran.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Raw SCSI/FC-AL device support for I2O. I2O presents SCSI devices
* individually; we group them by controller port.
*/
#include "opt_i2o.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/queue.h>
#include <sys/proc.h>
#include <sys/buf.h>
#include <sys/endian.h>
#include <sys/malloc.h>
#include <sys/scsiio.h>
#include <sys/lock.h>
#include <machine/bswap.h>
#include <machine/bus.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsi_disk.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/i2o/i2o.h>
#include <dev/i2o/iopreg.h>
#include <dev/i2o/iopvar.h>
#include <dev/i2o/iopspvar.h>
static void iopsp_attach(struct device *, struct device *, void *);
static void iopsp_intr(struct device *, struct iop_msg *, void *);
static int iopsp_ioctl(struct scsipi_link *, u_long, caddr_t, int,
struct proc *);
static int iopsp_match(struct device *, struct cfdata *, void *);
static void iopsp_minphys(struct buf *);
static int iopsp_rescan(struct iopsp_softc *);
static int iopsp_reconfig(struct device *);
static int iopsp_scsi_abort(struct iopsp_softc *, int, struct iop_msg *);
static int iopsp_scsi_cmd(struct scsipi_xfer *);
static struct scsipi_device iopsp_dev = {
NULL, /* Use default error handler */
NULL, /* have a queue, served by this */
NULL, /* have no async handler */
NULL, /* Use default 'done' routine */
};
struct cfattach iopsp_ca = {
sizeof(struct iopsp_softc), iopsp_match, iopsp_attach
};
/*
* Match SCSI and fibre channel ports.
*/
static int
iopsp_match(struct device *parent, struct cfdata *match, void *aux)
{
struct iop_attach_args *ia;
struct {
struct i2o_param_op_results pr;
struct i2o_param_read_results prr;
struct i2o_param_hba_ctlr_info ci;
} __attribute__ ((__packed__)) param;
ia = aux;
if (ia->ia_class != I2O_CLASS_BUS_ADAPTER_PORT)
return (0);
if (iop_param_op((struct iop_softc *)parent, ia->ia_tid, 0,
I2O_PARAM_HBA_CTLR_INFO, &param, sizeof(param)) != 0)
return (0);
return (param.ci.bustype == I2O_HBA_BUS_SCSI ||
param.ci.bustype == I2O_HBA_BUS_FCA);
}
/*
* Attach a supported device.
*/
static void
iopsp_attach(struct device *parent, struct device *self, void *aux)
{
struct iop_attach_args *ia;
struct iopsp_softc *sc;
struct scsipi_link *sc_link;
struct iop_softc *iop;
struct {
struct i2o_param_op_results pr;
struct i2o_param_read_results prr;
union {
struct i2o_param_device_identity di;
struct i2o_param_hba_ctlr_info ci;
struct i2o_param_hba_scsi_ctlr_info sci;
struct i2o_param_hba_scsi_port_info spi;
} p;
} __attribute__ ((__packed__)) param;
char ident[64];
int fcal, rv;
#ifdef I2OVERBOSE
int size;
#endif
ia = (struct iop_attach_args *)aux;
sc = (struct iopsp_softc *)self;
iop = (struct iop_softc *)parent;
sc->sc_tid = ia->ia_tid;
/* Register us as an initiator. */
sc->sc_ii.ii_dv = self;
sc->sc_ii.ii_intr = iopsp_intr;
sc->sc_ii.ii_flags = 0;
sc->sc_ii.ii_tid = ia->ia_tid;
sc->sc_ii.ii_reconfig = iopsp_reconfig;
if (iop_initiator_register(iop, &sc->sc_ii) != 0) {
printf("%s: unable to register as an initiator",
sc->sc_dv.dv_xname);
return;
}
rv = iop_param_op(iop, ia->ia_tid, 0, I2O_PARAM_HBA_CTLR_INFO, &param,
sizeof(param));
if (rv != 0) {
printf("%s: unable to get parameters (0x%04x; %d)\n",
sc->sc_dv.dv_xname, I2O_PARAM_HBA_CTLR_INFO, rv);
goto bad;
}
fcal = (param.p.ci.bustype == I2O_HBA_BUS_FCA); /* XXX */
/*
* Say what the device is. If we can find out what the controling
* device is, say what that is too.
*/
printf(": %s SCSI port", fcal ? "FC-AL" : "SE/LVD");
if (iop_param_op(iop, ia->ia_tid, 0, I2O_PARAM_DEVICE_IDENTITY, &param,
sizeof(param)) == 0) {
iop_strvis(iop, param.p.di.vendorinfo,
sizeof(param.p.di.vendorinfo), ident, sizeof(ident));
printf(" <%s, ", ident);
iop_strvis(iop, param.p.di.productinfo,
sizeof(param.p.di.productinfo), ident, sizeof(ident));
printf("%s, ", ident);
iop_strvis(iop, param.p.di.revlevel,
sizeof(param.p.di.revlevel), ident, sizeof(ident));
printf("%s> ", ident);
}
printf("\n");
rv = iop_param_op(iop, ia->ia_tid, 0, I2O_PARAM_HBA_SCSI_CTLR_INFO,
&param, sizeof(param));
if (rv != 0) {
printf("%s: unable to get parameters (0x%04x; %d)\n",
sc->sc_dv.dv_xname, I2O_PARAM_HBA_SCSI_CTLR_INFO, rv);
goto bad;
}
#ifdef I2OVERBOSE
printf("%s: %d-bit, max sync rate %dMHz, initiator ID %d\n",
sc->sc_dv.dv_xname, param.p.sci.maxdatawidth,
(u_int32_t)le64toh(param.p.sci.maxsyncrate) / 1000,
le32toh(param.p.sci.initiatorid));
#endif
sc->sc_adapter.scsipi_cmd = iopsp_scsi_cmd;
sc->sc_adapter.scsipi_minphys = iopsp_minphys;
sc->sc_adapter.scsipi_ioctl = iopsp_ioctl;
sc_link = &sc->sc_link;
sc_link->type = BUS_SCSI;
sc_link->device = &iopsp_dev;
sc_link->adapter = &sc->sc_adapter;
sc_link->adapter_softc = sc;
sc_link->scsipi_scsi.channel = 0;
sc_link->scsipi_scsi.adapter_target = le32toh(param.p.sci.initiatorid);
sc_link->scsipi_scsi.max_target =
fcal ? IOPSP_MAX_FCAL_TARGET : param.p.sci.maxdatawidth - 1;
sc_link->scsipi_scsi.max_lun = IOPSP_MAX_LUN;
sc_link->openings = iop->sc_maxqueuecnt / 4; /* XXX */
#ifdef I2OVERBOSE
/*
* Allocate the target map. Currently used for informational
* purposes only.
*/
size = (sc_link->scsipi_scsi.max_target + 1) *
sizeof(struct iopsp_target);
sc->sc_targetmap = malloc(size, M_DEVBUF, M_NOWAIT);
memset(sc->sc_targetmap, 0, size);
#endif
/* Build the two maps, and attach to scsipi. */
if (iopsp_reconfig(self) != 0) {
printf("%s: bus scan failed\n", sc->sc_dv.dv_xname);
goto bad;
}
config_found(self, sc_link, scsiprint);
return;
bad:
iop_initiator_unregister(iop, &sc->sc_ii);
}
/*
* Scan the LCT to determine which devices we control, and enter them into
* the maps.
*/
static int
iopsp_reconfig(struct device *dv)
{
struct iopsp_softc *sc;
struct iop_softc *iop;
struct i2o_lct_entry *le;
struct scsipi_link *sc_link;
struct {
struct i2o_param_op_results pr;
struct i2o_param_read_results prr;
struct i2o_param_scsi_device_info sdi;
} __attribute__ ((__packed__)) param;
int tid, nent, i, targ, lun, size, s, rv;
u_short *tidmap;
#ifdef I2OVERBOSE
struct iopsp_target *it;
int syncrate;
#endif
sc = (struct iopsp_softc *)dv;
iop = (struct iop_softc *)sc->sc_dv.dv_parent;
sc_link = &sc->sc_link;
/* Anything to do? */
if (iop->sc_lct->changeindicator == sc->sc_chgindicator)
return (0);
/*
* Allocate memory for the target/LUN -> TID map. Use zero to
* denote absent targets (zero is the TID of the I2O executive,
* and we never address that here).
*/
size = (sc_link->scsipi_scsi.max_target + 1) *
(IOPSP_MAX_LUN + 1) * sizeof(u_short);
if ((tidmap = malloc(size, M_DEVBUF, M_WAITOK)) == NULL)
return (ENOMEM);
memset(tidmap, 0, size);
#ifdef I2OVERBOSE
for (i = 0; i <= sc_link->scsipi_scsi.max_target; i++)
sc->sc_targetmap[i].it_flags &= ~IT_PRESENT;
#endif
nent = iop->sc_nlctent;
for (i = 0, le = iop->sc_lct->entry; i < nent; i++, le++) {
switch (le16toh(le->classid) & 4095) {
case I2O_CLASS_SCSI_PERIPHERAL:
break;
default:
continue;
}
if (((le32toh(le->usertid) >> 12) & 4095) != sc->sc_tid)
continue;
tid = le32toh(le->localtid) & 4095;
rv = iop_param_op(iop, tid, 0, I2O_PARAM_SCSI_DEVICE_INFO,
&param, sizeof(param));
if (rv != 0) {
printf("%s: unable to get parameters (0x%04x; %d)\n",
sc->sc_dv.dv_xname, I2O_PARAM_SCSI_DEVICE_INFO,
rv);
continue;
}
targ = le32toh(param.sdi.identifier);
lun = param.sdi.luninfo[1];
/* If the device is in use by a DDM, ignore it. */
if ((le32toh(le->usertid) & 4095) != 4095) {
#ifdef I2OVERBOSE
if (sc->sc_tidmap == NULL ||
IOPSP_TIDMAP(sc->sc_tidmap, targ, lun) !=
IOPSP_TID_INUSE)
printf("%s: target %d,%d (tid %d): in use by"
" tid %d\n", sc->sc_dv.dv_xname,
targ, lun, tid,
le32toh(le->usertid) & 4095);
#endif
IOPSP_TIDMAP(tidmap, targ, lun) = IOPSP_TID_INUSE;
continue;
}
IOPSP_TIDMAP(tidmap, targ, lun) = (u_short)tid;
#ifdef I2OVERBOSE
/*
* If we've already described this target, and nothing has
* changed, then don't describe it again.
*/
it = &sc->sc_targetmap[targ];
it->it_flags |= IT_PRESENT;
syncrate = ((int)le64toh(param.sdi.negsyncrate) + 500) / 1000;
if (it->it_width == param.sdi.negdatawidth &&
it->it_offset == param.sdi.negoffset &&
it->it_syncrate == syncrate)
continue;
it->it_width = param.sdi.negdatawidth;
it->it_offset = param.sdi.negoffset;
it->it_syncrate = syncrate;
printf("%s: target %d (tid %d): %d-bit, ", sc->sc_dv.dv_xname,
targ, tid, it->it_width);
if (it->it_syncrate == 0)
printf("asynchronous\n");
else
printf("synchronous at %dMHz, offset 0x%x\n",
it->it_syncrate, it->it_offset);
#endif
}
#ifdef I2OVERBOSE
for (i = 0; i <= sc_link->scsipi_scsi.max_target; i++)
if ((sc->sc_targetmap[i].it_flags & IT_PRESENT) == 0)
sc->sc_targetmap[i].it_width = 0;
#endif
/* Swap in the new map and return. */
s = splbio();
if (sc->sc_tidmap != NULL)
free(sc->sc_tidmap, M_DEVBUF);
sc->sc_tidmap = tidmap;
splx(s);
sc->sc_chgindicator = iop->sc_lct->changeindicator;
return (0);
}
/*
* Adjust the size of an I/O request.
*/
static void
iopsp_minphys(struct buf *bp)
{
if (bp->b_bcount > IOP_MAX_XFER)
bp->b_bcount = IOP_MAX_XFER;
minphys(bp);
}
/*
* Re-scan the bus; to be called from a higher level (e.g. scsipi).
*/
static int
iopsp_rescan(struct iopsp_softc *sc)
{
struct iop_softc *iop;
struct iop_msg *im;
struct i2o_hba_bus_scan *mb;
int rv;
iop = (struct iop_softc *)sc->sc_dv.dv_parent;
rv = lockmgr(&iop->sc_conflock, LK_EXCLUSIVE | LK_RECURSEFAIL, NULL);
if (rv != 0) {
#ifdef I2ODEBUG
printf("iopsp_rescan: unable to acquire lock\n");
#endif
return (rv);
}
/* XXX If it's boot time, the bus will already have been scanned. */
if (curproc != &proc0) {
if ((rv = iop_msg_alloc(iop, &sc->sc_ii, &im, IM_NOINTR)) != 0)
goto done;
mb = (struct i2o_hba_bus_scan *)im->im_msg;
mb->msgflags = I2O_MSGFLAGS(i2o_hba_bus_scan);
mb->msgfunc = I2O_MSGFUNC(sc->sc_tid, I2O_HBA_BUS_SCAN);
mb->msgictx = sc->sc_ii.ii_ictx;
mb->msgtctx = im->im_tctx;
rv = iop_msg_enqueue(iop, im, 5*60*1000);
iop_msg_free(iop, &sc->sc_ii, im);
if (rv != 0)
goto done;
if ((rv = iop_lct_get(iop)) != 0)
goto done;
}
/* Rebuild the target/LUN -> TID map, release lock, and return. */
rv = iopsp_reconfig(&sc->sc_dv);
done:
lockmgr(&iop->sc_conflock, LK_RELEASE, NULL);
return (rv);
}
/*
* Start a SCSI command.
*/
static int
iopsp_scsi_cmd(struct scsipi_xfer *xs)
{
struct scsipi_link *sc_link;
struct iopsp_softc *sc;
struct iop_msg *im;
struct iop_softc *iop;
struct i2o_scsi_scb_exec *mb;
int error, flags, tid;
sc_link = xs->sc_link;
flags = xs->xs_control;
sc = sc_link->adapter_softc;
iop = (struct iop_softc *)sc->sc_dv.dv_parent;
tid = IOPSP_TIDMAP(sc->sc_tidmap, sc_link->scsipi_scsi.target,
sc_link->scsipi_scsi.lun);
if (tid == IOPSP_TID_ABSENT || tid == IOPSP_TID_INUSE) {
xs->error = XS_SELTIMEOUT;
return (COMPLETE);
}
SC_DEBUG(sc_link, SDEV_DB2, ("iopsp_scsi_cmd\n"));
/* Need to reset the target? */
if ((flags & XS_CTL_RESET) != 0) {
if (iop_simple_cmd(iop, tid, I2O_SCSI_DEVICE_RESET,
sc->sc_ii.ii_ictx, 1, 10*1000) != 0) {
#ifdef I2ODEBUG
printf("%s: reset failed\n", sc->sc_dv.dv_xname);
#endif
xs->error = XS_DRIVER_STUFFUP;
}
return (COMPLETE);
}
#if defined(I2ODEBUG) || defined(SCSIDEBUG)
if (xs->cmdlen > 16)
panic("%s: CDB too large\n", sc->sc_dv.dv_xname);
#endif
if (iop_msg_alloc(iop, &sc->sc_ii, &im,
(flags & (XS_CTL_POLL | XS_CTL_NOSLEEP)) != 0 ? IM_NOWAIT : 0)) {
xs->error = XS_DRIVER_STUFFUP;
return (TRY_AGAIN_LATER);
}
im->im_dvcontext = xs;
mb = (struct i2o_scsi_scb_exec *)im->im_msg;
mb->msgflags = I2O_MSGFLAGS(i2o_scsi_scb_exec);
mb->msgfunc = I2O_MSGFUNC(tid, I2O_SCSI_SCB_EXEC);
mb->msgictx = sc->sc_ii.ii_ictx;
mb->msgtctx = im->im_tctx;
mb->flags = xs->cmdlen | I2O_SCB_FLAG_ENABLE_DISCONNECT |
I2O_SCB_FLAG_SENSE_DATA_IN_MESSAGE;
memcpy(mb->cdb, xs->cmd, xs->cmdlen);
mb->datalen = xs->datalen;
if ((xs->sc_link->quirks & SDEV_NOTAG) == 0 &&
(xs->xs_control & XS_CTL_POLL) != 0) {
if (xs->bp != NULL && (xs->bp->b_flags & B_ASYNC) != 0)
mb->flags |= I2O_SCB_FLAG_ORDERED_QUEUE_TAG;
else
mb->flags |= I2O_SCB_FLAG_SIMPLE_QUEUE_TAG;
}
if (xs->datalen != 0) {
error = iop_msg_map(iop, im, xs->data, xs->datalen,
(flags & XS_CTL_DATA_OUT) == 0);
if (error) {
#ifdef I2ODEBUG
printf("%s: error %d mapping xfer\n",
sc->sc_dv.dv_xname, error);
#endif
xs->error = XS_DRIVER_STUFFUP;
iop_msg_free(iop, &sc->sc_ii, im);
return (COMPLETE);
}
if ((flags & XS_CTL_DATA_IN) == 0)
mb->flags |= I2O_SCB_FLAG_XFER_TO_DEVICE;
else
mb->flags |= I2O_SCB_FLAG_XFER_FROM_DEVICE;
}
/*
* If the command is allowed to execute asynchronously, enqueue it
* with the IOP.
*/
if ((flags & XS_CTL_POLL) == 0) {
iop_msg_enqueue(iop, im, 0);
return (SUCCESSFULLY_QUEUED);
}
if (iop_msg_send(iop, im, xs->timeout)) {
scsi_print_addr(xs->sc_link);
printf("timeout; aborting command\n");
if (iopsp_scsi_abort(sc, tid, im)) {
scsi_print_addr(xs->sc_link);
printf("abort failed\n");
}
xs->error = XS_DRIVER_STUFFUP;
}
return (COMPLETE);
}
/*
* Abort the specified I2O_SCSI_SCB_EXEC message and its associated SCB.
*/
static int
iopsp_scsi_abort(struct iopsp_softc *sc, int atid, struct iop_msg *aim)
{
struct iop_msg *im;
struct i2o_scsi_scb_abort *mb;
struct iop_softc *iop;
int rv;
iop = (struct iop_softc *)sc->sc_dv.dv_parent;
rv = iop_msg_alloc(iop, &sc->sc_ii, &im, IM_NOWAIT | IM_NOINTR);
if (rv != 0)
return (rv);
mb = (struct i2o_scsi_scb_abort *)im->im_msg;
mb->msgflags = I2O_MSGFLAGS(i2o_scsi_scb_abort);
mb->msgfunc = I2O_MSGFUNC(atid, I2O_SCSI_SCB_ABORT);
mb->msgictx = sc->sc_ii.ii_ictx;
mb->msgtctx = im->im_tctx;
mb->tctxabort = aim->im_tctx;
rv = iop_msg_send(iop, im, 1000);
iop_msg_free(iop, &sc->sc_ii, im);
return (rv);
}
/*
* We have a message which has been processed and replied to by the IOP -
* deal with it.
*/
static void
iopsp_intr(struct device *dv, struct iop_msg *im, void *reply)
{
struct scsipi_xfer *xs;
struct iopsp_softc *sc;
struct i2o_scsi_reply *rb;
struct iop_softc *iop;
u_int hba_status, scsi_status, detail;
int sl;
sc = (struct iopsp_softc *)dv;
xs = (struct scsipi_xfer *)im->im_dvcontext;
iop = (struct iop_softc *)dv->dv_parent;
SC_DEBUG(xs->sc_link, SDEV_DB2, ("iopsp_intr\n"));
if (xs->error == XS_NOERROR) {
rb = reply;
detail = le16toh(rb->detail);
hba_status = (detail >> 8) & 0xff;
scsi_status = detail & 0xff;
if (hba_status != I2O_SCSI_DSC_SUCCESS) {
switch (hba_status) {
case I2O_SCSI_DSC_ADAPTER_BUSY:
case I2O_SCSI_DSC_SCSI_BUS_RESET:
case I2O_SCSI_DSC_BUS_BUSY:
xs->error = XS_BUSY;
break;
case I2O_SCSI_DSC_SELECTION_TIMEOUT:
xs->error = XS_SELTIMEOUT;
break;
case I2O_SCSI_DSC_COMMAND_TIMEOUT:
case I2O_SCSI_DSC_DEVICE_NOT_PRESENT:
case I2O_SCSI_DSC_LUN_INVALID:
case I2O_SCSI_DSC_SCSI_TID_INVALID:
xs->error = XS_TIMEOUT;
break;
default:
xs->error = XS_DRIVER_STUFFUP;
break;
}
#ifdef I2ODEBUG
printf("%s: HBA status 0x%02x\n", sc->sc_dv.dv_xname,
hba_status);
#endif
} else if (scsi_status != SCSI_OK) {
switch (scsi_status) {
case SCSI_CHECK:
xs->error = XS_SENSE;
sl = le32toh(rb->senselen);
if (xs->req_sense_length != 0 &&
xs->req_sense_length < sl)
sl = xs->req_sense_length;
if (sl > sizeof(xs->sense.scsi_sense))
sl = le32toh(rb->senselen);
memcpy(&xs->sense.scsi_sense, rb->sense, sl);
break;
case SCSI_BUSY:
xs->error = XS_BUSY;
break;
default:
xs->error = XS_DRIVER_STUFFUP;
break;
}
} else
xs->error = XS_NOERROR;
xs->resid = le32toh(rb->datalen) - xs->datalen;
xs->status = scsi_status;
}
/* Free the message wrapper and pass the news to scsipi. */
iop_msg_unmap(iop, im);
iop_msg_free(iop, &sc->sc_ii, im);
xs->xs_status |= XS_STS_DONE;
scsipi_done(xs);
}
/*
* ioctl hook; used here only to initiate low-level rescans.
*/
static int
iopsp_ioctl(struct scsipi_link *sc_link, u_long cmd, caddr_t data, int flag,
struct proc *p)
{
int rv;
switch (cmd) {
case SCBUSIOLLSCAN:
rv = iopsp_rescan(sc_link->adapter_softc);
break;
default:
rv = ENXIO;
break;
}
return (rv);
}