36e9866d7b
- Use static to unexport symbols that don't need to be exported. - ANSI'ify. - Some whitespace nits.
694 lines
21 KiB
C
694 lines
21 KiB
C
/* $NetBSD: piixide.c,v 1.2 2003/10/11 17:40:15 thorpej Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1999, 2000, 2001 Manuel Bouyer.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Manuel Bouyer.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcidevs.h>
|
|
#include <dev/pci/pciidereg.h>
|
|
#include <dev/pci/pciidevar.h>
|
|
#include <dev/pci/pciide_piix_reg.h>
|
|
|
|
static void piix_chip_map(struct pciide_softc*, struct pci_attach_args *);
|
|
static void piix_setup_channel(struct channel_softc *);
|
|
static void piix3_4_setup_channel(struct channel_softc *);
|
|
static u_int32_t piix_setup_idetim_timings(u_int8_t, u_int8_t, u_int8_t);
|
|
static u_int32_t piix_setup_idetim_drvs(struct ata_drive_datas *);
|
|
static u_int32_t piix_setup_sidetim_timings(u_int8_t, u_int8_t, u_int8_t);
|
|
static void artisea_chip_map(struct pciide_softc*, struct pci_attach_args *);
|
|
|
|
static int piixide_match(struct device *, struct cfdata *, void *);
|
|
static void piixide_attach(struct device *, struct device *, void *);
|
|
|
|
static const struct pciide_product_desc pciide_intel_products[] = {
|
|
{ PCI_PRODUCT_INTEL_82092AA,
|
|
0,
|
|
"Intel 82092AA IDE controller",
|
|
default_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82371FB_IDE,
|
|
0,
|
|
"Intel 82371FB IDE controller (PIIX)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82371SB_IDE,
|
|
0,
|
|
"Intel 82371SB IDE Interface (PIIX3)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82371AB_IDE,
|
|
0,
|
|
"Intel 82371AB IDE controller (PIIX4)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82440MX_IDE,
|
|
0,
|
|
"Intel 82440MX IDE controller",
|
|
piix_chip_map
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82801AA_IDE,
|
|
0,
|
|
"Intel 82801AA IDE Controller (ICH)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82801AB_IDE,
|
|
0,
|
|
"Intel 82801AB IDE Controller (ICH0)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82801BA_IDE,
|
|
0,
|
|
"Intel 82801BA IDE Controller (ICH2)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82801BAM_IDE,
|
|
0,
|
|
"Intel 82801BAM IDE Controller (ICH2-M)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82801CA_IDE_1,
|
|
0,
|
|
"Intel 82801CA IDE Controller (ICH3)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82801CA_IDE_2,
|
|
0,
|
|
"Intel 82801CA IDE Controller (ICH3)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82801DB_IDE,
|
|
0,
|
|
"Intel 82801DB IDE Controller (ICH4)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82801DBM_IDE,
|
|
0,
|
|
"Intel 82801DBM IDE Controller (ICH4-M)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82801EB_IDE,
|
|
0,
|
|
"Intel 82801EB IDE Controller (ICH5)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_31244,
|
|
0,
|
|
"Intel 31244 Serial ATA Controller",
|
|
artisea_chip_map,
|
|
},
|
|
/*
|
|
* XXX Is this really the same as the 31244? --thorpej
|
|
*/
|
|
{ PCI_PRODUCT_INTEL_82801EB_SATA,
|
|
0,
|
|
"Intel 82801EB Serial ATA Controller",
|
|
artisea_chip_map,
|
|
},
|
|
{ 0,
|
|
0,
|
|
NULL,
|
|
NULL
|
|
}
|
|
};
|
|
|
|
CFATTACH_DECL(piixide, sizeof(struct pciide_softc),
|
|
piixide_match, piixide_attach, NULL, NULL);
|
|
|
|
static int
|
|
piixide_match(struct device *parent, struct cfdata *match, void *aux)
|
|
{
|
|
struct pci_attach_args *pa = aux;
|
|
|
|
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_INTEL) {
|
|
if (pciide_lookup_product(pa->pa_id, pciide_intel_products))
|
|
return (2);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
piixide_attach(struct device *parent, struct device *self, void *aux)
|
|
{
|
|
struct pci_attach_args *pa = aux;
|
|
struct pciide_softc *sc = (struct pciide_softc *)self;
|
|
|
|
pciide_common_attach(sc, pa,
|
|
pciide_lookup_product(pa->pa_id, pciide_intel_products));
|
|
|
|
}
|
|
|
|
static void
|
|
piix_chip_map(struct pciide_softc *sc, struct pci_attach_args *pa)
|
|
{
|
|
struct pciide_channel *cp;
|
|
int channel;
|
|
u_int32_t idetim;
|
|
bus_size_t cmdsize, ctlsize;
|
|
|
|
if (pciide_chipen(sc, pa) == 0)
|
|
return;
|
|
|
|
aprint_normal("%s: bus-master DMA support present",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
pciide_mapreg_dma(sc, pa);
|
|
aprint_normal("\n");
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
|
|
WDC_CAPABILITY_MODE;
|
|
if (sc->sc_dma_ok) {
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
|
|
sc->sc_wdcdev.irqack = pciide_irqack;
|
|
switch(sc->sc_pp->ide_product) {
|
|
case PCI_PRODUCT_INTEL_82371AB_IDE:
|
|
case PCI_PRODUCT_INTEL_82440MX_IDE:
|
|
case PCI_PRODUCT_INTEL_82801AA_IDE:
|
|
case PCI_PRODUCT_INTEL_82801AB_IDE:
|
|
case PCI_PRODUCT_INTEL_82801BA_IDE:
|
|
case PCI_PRODUCT_INTEL_82801BAM_IDE:
|
|
case PCI_PRODUCT_INTEL_82801CA_IDE_1:
|
|
case PCI_PRODUCT_INTEL_82801CA_IDE_2:
|
|
case PCI_PRODUCT_INTEL_82801DB_IDE:
|
|
case PCI_PRODUCT_INTEL_82801DBM_IDE:
|
|
case PCI_PRODUCT_INTEL_82801EB_IDE:
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
|
|
}
|
|
}
|
|
sc->sc_wdcdev.PIO_cap = 4;
|
|
sc->sc_wdcdev.DMA_cap = 2;
|
|
switch(sc->sc_pp->ide_product) {
|
|
case PCI_PRODUCT_INTEL_82801AA_IDE:
|
|
sc->sc_wdcdev.UDMA_cap = 4;
|
|
break;
|
|
case PCI_PRODUCT_INTEL_82801BA_IDE:
|
|
case PCI_PRODUCT_INTEL_82801BAM_IDE:
|
|
case PCI_PRODUCT_INTEL_82801CA_IDE_1:
|
|
case PCI_PRODUCT_INTEL_82801CA_IDE_2:
|
|
case PCI_PRODUCT_INTEL_82801DB_IDE:
|
|
case PCI_PRODUCT_INTEL_82801DBM_IDE:
|
|
case PCI_PRODUCT_INTEL_82801EB_IDE:
|
|
sc->sc_wdcdev.UDMA_cap = 5;
|
|
break;
|
|
default:
|
|
sc->sc_wdcdev.UDMA_cap = 2;
|
|
}
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82371FB_IDE)
|
|
sc->sc_wdcdev.set_modes = piix_setup_channel;
|
|
else
|
|
sc->sc_wdcdev.set_modes = piix3_4_setup_channel;
|
|
sc->sc_wdcdev.channels = sc->wdc_chanarray;
|
|
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
|
|
|
|
WDCDEBUG_PRINT(("piix_setup_chip: old idetim=0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
|
|
DEBUG_PROBE);
|
|
if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
|
|
WDCDEBUG_PRINT((", sidetim=0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
|
|
DEBUG_PROBE);
|
|
if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
|
|
WDCDEBUG_PRINT((", udamreg 0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
|
|
DEBUG_PROBE);
|
|
}
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2 ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DB_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DBM_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801EB_IDE ) {
|
|
WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
|
|
DEBUG_PROBE);
|
|
}
|
|
|
|
}
|
|
WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
|
|
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
cp = &sc->pciide_channels[channel];
|
|
/* PIIX is compat-only */
|
|
if (pciide_chansetup(sc, channel, 0) == 0)
|
|
continue;
|
|
idetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
|
|
if ((PIIX_IDETIM_READ(idetim, channel) &
|
|
PIIX_IDETIM_IDE) == 0) {
|
|
#if 1
|
|
aprint_normal("%s: %s channel ignored (disabled)\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
cp->wdc_channel.ch_flags |= WDCF_DISABLED;
|
|
continue;
|
|
#else
|
|
pcireg_t interface;
|
|
|
|
idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE,
|
|
channel);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM,
|
|
idetim);
|
|
interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc,
|
|
sc->sc_tag, PCI_CLASS_REG));
|
|
aprint_normal("channel %d idetim=%08x interface=%02x\n",
|
|
channel, idetim, interface);
|
|
#endif
|
|
}
|
|
/* PIIX are compat-only pciide devices */
|
|
pciide_mapchan(pa, cp, 0, &cmdsize, &ctlsize, pciide_pci_intr);
|
|
}
|
|
|
|
WDCDEBUG_PRINT(("piix_setup_chip: idetim=0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
|
|
DEBUG_PROBE);
|
|
if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
|
|
WDCDEBUG_PRINT((", sidetim=0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
|
|
DEBUG_PROBE);
|
|
if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
|
|
WDCDEBUG_PRINT((", udamreg 0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
|
|
DEBUG_PROBE);
|
|
}
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2 ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DB_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DBM_IDE) {
|
|
WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
|
|
DEBUG_PROBE);
|
|
}
|
|
}
|
|
WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
|
|
}
|
|
|
|
static void
|
|
piix_setup_channel(struct channel_softc *chp)
|
|
{
|
|
u_int8_t mode[2], drive;
|
|
u_int32_t oidetim, idetim, idedma_ctl;
|
|
struct pciide_channel *cp = (struct pciide_channel*)chp;
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
struct ata_drive_datas *drvp = cp->wdc_channel.ch_drive;
|
|
|
|
oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
|
|
idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, chp->channel);
|
|
idedma_ctl = 0;
|
|
|
|
/* set up new idetim: Enable IDE registers decode */
|
|
idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE,
|
|
chp->channel);
|
|
|
|
/* setup DMA */
|
|
pciide_channel_dma_setup(cp);
|
|
|
|
/*
|
|
* Here we have to mess up with drives mode: PIIX can't have
|
|
* different timings for master and slave drives.
|
|
* We need to find the best combination.
|
|
*/
|
|
|
|
/* If both drives supports DMA, take the lower mode */
|
|
if ((drvp[0].drive_flags & DRIVE_DMA) &&
|
|
(drvp[1].drive_flags & DRIVE_DMA)) {
|
|
mode[0] = mode[1] =
|
|
min(drvp[0].DMA_mode, drvp[1].DMA_mode);
|
|
drvp[0].DMA_mode = mode[0];
|
|
drvp[1].DMA_mode = mode[1];
|
|
goto ok;
|
|
}
|
|
/*
|
|
* If only one drive supports DMA, use its mode, and
|
|
* put the other one in PIO mode 0 if mode not compatible
|
|
*/
|
|
if (drvp[0].drive_flags & DRIVE_DMA) {
|
|
mode[0] = drvp[0].DMA_mode;
|
|
mode[1] = drvp[1].PIO_mode;
|
|
if (piix_isp_pio[mode[1]] != piix_isp_dma[mode[0]] ||
|
|
piix_rtc_pio[mode[1]] != piix_rtc_dma[mode[0]])
|
|
mode[1] = drvp[1].PIO_mode = 0;
|
|
goto ok;
|
|
}
|
|
if (drvp[1].drive_flags & DRIVE_DMA) {
|
|
mode[1] = drvp[1].DMA_mode;
|
|
mode[0] = drvp[0].PIO_mode;
|
|
if (piix_isp_pio[mode[0]] != piix_isp_dma[mode[1]] ||
|
|
piix_rtc_pio[mode[0]] != piix_rtc_dma[mode[1]])
|
|
mode[0] = drvp[0].PIO_mode = 0;
|
|
goto ok;
|
|
}
|
|
/*
|
|
* If both drives are not DMA, takes the lower mode, unless
|
|
* one of them is PIO mode < 2
|
|
*/
|
|
if (drvp[0].PIO_mode < 2) {
|
|
mode[0] = drvp[0].PIO_mode = 0;
|
|
mode[1] = drvp[1].PIO_mode;
|
|
} else if (drvp[1].PIO_mode < 2) {
|
|
mode[1] = drvp[1].PIO_mode = 0;
|
|
mode[0] = drvp[0].PIO_mode;
|
|
} else {
|
|
mode[0] = mode[1] =
|
|
min(drvp[1].PIO_mode, drvp[0].PIO_mode);
|
|
drvp[0].PIO_mode = mode[0];
|
|
drvp[1].PIO_mode = mode[1];
|
|
}
|
|
ok: /* The modes are setup */
|
|
for (drive = 0; drive < 2; drive++) {
|
|
if (drvp[drive].drive_flags & DRIVE_DMA) {
|
|
idetim |= piix_setup_idetim_timings(
|
|
mode[drive], 1, chp->channel);
|
|
goto end;
|
|
}
|
|
}
|
|
/* If we are there, none of the drives are DMA */
|
|
if (mode[0] >= 2)
|
|
idetim |= piix_setup_idetim_timings(
|
|
mode[0], 0, chp->channel);
|
|
else
|
|
idetim |= piix_setup_idetim_timings(
|
|
mode[1], 0, chp->channel);
|
|
end: /*
|
|
* timing mode is now set up in the controller. Enable
|
|
* it per-drive
|
|
*/
|
|
for (drive = 0; drive < 2; drive++) {
|
|
/* If no drive, skip */
|
|
if ((drvp[drive].drive_flags & DRIVE) == 0)
|
|
continue;
|
|
idetim |= piix_setup_idetim_drvs(&drvp[drive]);
|
|
if (drvp[drive].drive_flags & DRIVE_DMA)
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
}
|
|
if (idedma_ctl != 0) {
|
|
/* Add software bits in status register */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
|
|
idedma_ctl);
|
|
}
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
|
|
}
|
|
|
|
static void
|
|
piix3_4_setup_channel(struct channel_softc *chp)
|
|
{
|
|
struct ata_drive_datas *drvp;
|
|
u_int32_t oidetim, idetim, sidetim, udmareg, ideconf, idedma_ctl;
|
|
struct pciide_channel *cp = (struct pciide_channel*)chp;
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
int drive;
|
|
int channel = chp->channel;
|
|
|
|
oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
|
|
sidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM);
|
|
udmareg = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG);
|
|
ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG);
|
|
idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, channel);
|
|
sidetim &= ~(PIIX_SIDETIM_ISP_MASK(channel) |
|
|
PIIX_SIDETIM_RTC_MASK(channel));
|
|
idedma_ctl = 0;
|
|
|
|
/* set up new idetim: Enable IDE registers decode */
|
|
idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE, channel);
|
|
|
|
/* setup DMA if needed */
|
|
pciide_channel_dma_setup(cp);
|
|
|
|
for (drive = 0; drive < 2; drive++) {
|
|
udmareg &= ~(PIIX_UDMACTL_DRV_EN(channel, drive) |
|
|
PIIX_UDMATIM_SET(0x3, channel, drive));
|
|
drvp = &chp->ch_drive[drive];
|
|
/* If no drive, skip */
|
|
if ((drvp->drive_flags & DRIVE) == 0)
|
|
continue;
|
|
if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
|
|
(drvp->drive_flags & DRIVE_UDMA) == 0))
|
|
goto pio;
|
|
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2 ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DB_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DBM_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801EB_IDE) {
|
|
ideconf |= PIIX_CONFIG_PINGPONG;
|
|
}
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2 ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DB_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801DBM_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801EB_IDE) {
|
|
/* setup Ultra/100 */
|
|
if (drvp->UDMA_mode > 2 &&
|
|
(ideconf & PIIX_CONFIG_CR(channel, drive)) == 0)
|
|
drvp->UDMA_mode = 2;
|
|
if (drvp->UDMA_mode > 4) {
|
|
ideconf |= PIIX_CONFIG_UDMA100(channel, drive);
|
|
} else {
|
|
ideconf &= ~PIIX_CONFIG_UDMA100(channel, drive);
|
|
if (drvp->UDMA_mode > 2) {
|
|
ideconf |= PIIX_CONFIG_UDMA66(channel,
|
|
drive);
|
|
} else {
|
|
ideconf &= ~PIIX_CONFIG_UDMA66(channel,
|
|
drive);
|
|
}
|
|
}
|
|
}
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE) {
|
|
/* setup Ultra/66 */
|
|
if (drvp->UDMA_mode > 2 &&
|
|
(ideconf & PIIX_CONFIG_CR(channel, drive)) == 0)
|
|
drvp->UDMA_mode = 2;
|
|
if (drvp->UDMA_mode > 2)
|
|
ideconf |= PIIX_CONFIG_UDMA66(channel, drive);
|
|
else
|
|
ideconf &= ~PIIX_CONFIG_UDMA66(channel, drive);
|
|
}
|
|
if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
|
|
(drvp->drive_flags & DRIVE_UDMA)) {
|
|
/* use Ultra/DMA */
|
|
drvp->drive_flags &= ~DRIVE_DMA;
|
|
udmareg |= PIIX_UDMACTL_DRV_EN( channel, drive);
|
|
udmareg |= PIIX_UDMATIM_SET(
|
|
piix4_sct_udma[drvp->UDMA_mode], channel, drive);
|
|
} else {
|
|
/* use Multiword DMA */
|
|
drvp->drive_flags &= ~DRIVE_UDMA;
|
|
if (drive == 0) {
|
|
idetim |= piix_setup_idetim_timings(
|
|
drvp->DMA_mode, 1, channel);
|
|
} else {
|
|
sidetim |= piix_setup_sidetim_timings(
|
|
drvp->DMA_mode, 1, channel);
|
|
idetim =PIIX_IDETIM_SET(idetim,
|
|
PIIX_IDETIM_SITRE, channel);
|
|
}
|
|
}
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
|
|
pio: /* use PIO mode */
|
|
idetim |= piix_setup_idetim_drvs(drvp);
|
|
if (drive == 0) {
|
|
idetim |= piix_setup_idetim_timings(
|
|
drvp->PIO_mode, 0, channel);
|
|
} else {
|
|
sidetim |= piix_setup_sidetim_timings(
|
|
drvp->PIO_mode, 0, channel);
|
|
idetim =PIIX_IDETIM_SET(idetim,
|
|
PIIX_IDETIM_SITRE, channel);
|
|
}
|
|
}
|
|
if (idedma_ctl != 0) {
|
|
/* Add software bits in status register */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
|
|
idedma_ctl);
|
|
}
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM, sidetim);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG, udmareg);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_CONFIG, ideconf);
|
|
}
|
|
|
|
|
|
/* setup ISP and RTC fields, based on mode */
|
|
static u_int32_t
|
|
piix_setup_idetim_timings(mode, dma, channel)
|
|
u_int8_t mode;
|
|
u_int8_t dma;
|
|
u_int8_t channel;
|
|
{
|
|
|
|
if (dma)
|
|
return PIIX_IDETIM_SET(0,
|
|
PIIX_IDETIM_ISP_SET(piix_isp_dma[mode]) |
|
|
PIIX_IDETIM_RTC_SET(piix_rtc_dma[mode]),
|
|
channel);
|
|
else
|
|
return PIIX_IDETIM_SET(0,
|
|
PIIX_IDETIM_ISP_SET(piix_isp_pio[mode]) |
|
|
PIIX_IDETIM_RTC_SET(piix_rtc_pio[mode]),
|
|
channel);
|
|
}
|
|
|
|
/* setup DTE, PPE, IE and TIME field based on PIO mode */
|
|
static u_int32_t
|
|
piix_setup_idetim_drvs(drvp)
|
|
struct ata_drive_datas *drvp;
|
|
{
|
|
u_int32_t ret = 0;
|
|
struct channel_softc *chp = drvp->chnl_softc;
|
|
u_int8_t channel = chp->channel;
|
|
u_int8_t drive = drvp->drive;
|
|
|
|
/*
|
|
* If drive is using UDMA, timings setups are independant
|
|
* So just check DMA and PIO here.
|
|
*/
|
|
if (drvp->drive_flags & DRIVE_DMA) {
|
|
/* if mode = DMA mode 0, use compatible timings */
|
|
if ((drvp->drive_flags & DRIVE_DMA) &&
|
|
drvp->DMA_mode == 0) {
|
|
drvp->PIO_mode = 0;
|
|
return ret;
|
|
}
|
|
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
|
|
/*
|
|
* PIO and DMA timings are the same, use fast timings for PIO
|
|
* too, else use compat timings.
|
|
*/
|
|
if ((piix_isp_pio[drvp->PIO_mode] !=
|
|
piix_isp_dma[drvp->DMA_mode]) ||
|
|
(piix_rtc_pio[drvp->PIO_mode] !=
|
|
piix_rtc_dma[drvp->DMA_mode]))
|
|
drvp->PIO_mode = 0;
|
|
/* if PIO mode <= 2, use compat timings for PIO */
|
|
if (drvp->PIO_mode <= 2) {
|
|
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_DTE(drive),
|
|
channel);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Now setup PIO modes. If mode < 2, use compat timings.
|
|
* Else enable fast timings. Enable IORDY and prefetch/post
|
|
* if PIO mode >= 3.
|
|
*/
|
|
|
|
if (drvp->PIO_mode < 2)
|
|
return ret;
|
|
|
|
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
|
|
if (drvp->PIO_mode >= 3) {
|
|
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_IE(drive), channel);
|
|
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_PPE(drive), channel);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* setup values in SIDETIM registers, based on mode */
|
|
static u_int32_t
|
|
piix_setup_sidetim_timings(mode, dma, channel)
|
|
u_int8_t mode;
|
|
u_int8_t dma;
|
|
u_int8_t channel;
|
|
{
|
|
if (dma)
|
|
return PIIX_SIDETIM_ISP_SET(piix_isp_dma[mode], channel) |
|
|
PIIX_SIDETIM_RTC_SET(piix_rtc_dma[mode], channel);
|
|
else
|
|
return PIIX_SIDETIM_ISP_SET(piix_isp_pio[mode], channel) |
|
|
PIIX_SIDETIM_RTC_SET(piix_rtc_pio[mode], channel);
|
|
}
|
|
|
|
static void
|
|
artisea_chip_map(struct pciide_softc *sc, struct pci_attach_args *pa)
|
|
{
|
|
struct pciide_channel *cp;
|
|
bus_size_t cmdsize, ctlsize;
|
|
pcireg_t interface;
|
|
int channel;
|
|
|
|
if (pciide_chipen(sc, pa) == 0)
|
|
return;
|
|
|
|
aprint_normal("%s: bus-master DMA support present",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
#ifndef PCIIDE_I31244_ENABLEDMA
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_31244 &&
|
|
PCI_REVISION(pa->pa_class) == 0) {
|
|
aprint_normal(" but disabled due to rev. 0");
|
|
sc->sc_dma_ok = 0;
|
|
} else
|
|
#endif
|
|
pciide_mapreg_dma(sc, pa);
|
|
aprint_normal("\n");
|
|
|
|
/*
|
|
* XXX Configure LEDs to show activity.
|
|
*/
|
|
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
|
|
WDC_CAPABILITY_MODE;
|
|
sc->sc_wdcdev.PIO_cap = 4;
|
|
if (sc->sc_dma_ok) {
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
|
|
sc->sc_wdcdev.irqack = pciide_irqack;
|
|
sc->sc_wdcdev.DMA_cap = 2;
|
|
sc->sc_wdcdev.UDMA_cap = 6;
|
|
}
|
|
sc->sc_wdcdev.set_modes = sata_setup_channel;
|
|
|
|
sc->sc_wdcdev.channels = sc->wdc_chanarray;
|
|
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
|
|
|
|
interface = PCI_INTERFACE(pa->pa_class);
|
|
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
cp = &sc->pciide_channels[channel];
|
|
if (pciide_chansetup(sc, channel, interface) == 0)
|
|
continue;
|
|
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
|
|
pciide_pci_intr);
|
|
}
|
|
}
|