2003 lines
55 KiB
C
2003 lines
55 KiB
C
/* $NetBSD: osiop.c,v 1.17 2003/11/02 11:07:45 wiz Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2001 Izumi Tsutsui. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 1990 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Van Jacobson of Lawrence Berkeley Laboratory.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)siop.c 7.5 (Berkeley) 5/4/91
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 1994 Michael L. Hitch
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Van Jacobson of Lawrence Berkeley Laboratory.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)siop.c 7.5 (Berkeley) 5/4/91
|
|
*/
|
|
|
|
/*
|
|
* MI NCR53C710 scsi adaptor driver; based on arch/amiga/dev/siop.c:
|
|
* NetBSD: siop.c,v 1.43 1999/09/30 22:59:53 thorpej Exp
|
|
*
|
|
* bus_space/bus_dma'fied by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
|
|
*
|
|
* The 53c710 datasheet is available at:
|
|
* http://www.lsilogic.com/techlib/techdocs/storage_stand_prod/index.html
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: osiop.c,v 1.17 2003/11/02 11:07:45 wiz Exp $");
|
|
|
|
/* #define OSIOP_DEBUG */
|
|
|
|
#include "opt_ddb.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/device.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/kernel.h>
|
|
|
|
#include <uvm/uvm_extern.h>
|
|
|
|
#include <dev/scsipi/scsi_all.h>
|
|
#include <dev/scsipi/scsipi_all.h>
|
|
#include <dev/scsipi/scsiconf.h>
|
|
#include <dev/scsipi/scsi_message.h>
|
|
|
|
#include <machine/cpu.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/ic/osiopreg.h>
|
|
#include <dev/ic/osiopvar.h>
|
|
|
|
/* 53C710 script */
|
|
#include <dev/microcode/siop/osiop.out>
|
|
|
|
void osiop_attach(struct osiop_softc *);
|
|
void osiop_minphys(struct buf *);
|
|
void osiop_scsipi_request(struct scsipi_channel *, scsipi_adapter_req_t,
|
|
void *);
|
|
void osiop_poll(struct osiop_softc *, struct osiop_acb *);
|
|
void osiop_sched(struct osiop_softc *);
|
|
void osiop_scsidone(struct osiop_acb *, int);
|
|
void osiop_abort(struct osiop_softc *, const char *);
|
|
void osiop_init(struct osiop_softc *);
|
|
void osiop_reset(struct osiop_softc *);
|
|
void osiop_resetbus(struct osiop_softc *);
|
|
void osiop_start(struct osiop_softc *);
|
|
int osiop_checkintr(struct osiop_softc *, u_int8_t, u_int8_t, u_int8_t, int *);
|
|
void osiop_select(struct osiop_softc *);
|
|
void osiop_update_xfer_mode(struct osiop_softc *, int);
|
|
void scsi_period_to_osiop(struct osiop_softc *, int);
|
|
void osiop_timeout(void *);
|
|
|
|
int osiop_reset_delay = 250; /* delay after reset, in milliseconds */
|
|
|
|
#ifdef OSIOP_DEBUG
|
|
#define DEBUG_DMA 0x01
|
|
#define DEBUG_INT 0x02
|
|
#define DEBUG_PHASE 0x04
|
|
#define DEBUG_UNEXCEPT 0x08
|
|
#define DEBUG_DISC 0x10
|
|
#define DEBUG_CMD 0x20
|
|
#define DEBUG_ALL 0xff
|
|
int osiop_debug = 0; /*DEBUG_ALL;*/
|
|
int osiopsync_debug = 0;
|
|
int osiopdma_hits = 1;
|
|
int osiopstarts = 0;
|
|
int osiopints = 0;
|
|
int osiopphmm = 0;
|
|
int osiop_trix = 0;
|
|
#define OSIOP_TRACE_SIZE 128
|
|
#define OSIOP_TRACE(a,b,c,d) do { \
|
|
osiop_trbuf[osiop_trix + 0] = (a); \
|
|
osiop_trbuf[osiop_trix + 1] = (b); \
|
|
osiop_trbuf[osiop_trix + 2] = (c); \
|
|
osiop_trbuf[osiop_trix + 3] = (d); \
|
|
osiop_trix = (osiop_trix + 4) & (OSIOP_TRACE_SIZE - 1); \
|
|
} while (0)
|
|
u_int8_t osiop_trbuf[OSIOP_TRACE_SIZE];
|
|
void osiop_dump_trace(void);
|
|
void osiop_dump_acb(struct osiop_acb *);
|
|
void osiop_dump(struct osiop_softc *);
|
|
#else
|
|
#define OSIOP_TRACE(a,b,c,d)
|
|
#endif
|
|
|
|
void
|
|
osiop_attach(sc)
|
|
struct osiop_softc *sc;
|
|
{
|
|
struct osiop_acb *acb;
|
|
bus_dma_segment_t seg;
|
|
int nseg;
|
|
int i, err;
|
|
|
|
/*
|
|
* Allocate and map DMA-safe memory for the script.
|
|
*/
|
|
err = bus_dmamem_alloc(sc->sc_dmat, PAGE_SIZE, PAGE_SIZE, 0,
|
|
&seg, 1, &nseg, BUS_DMA_NOWAIT);
|
|
if (err) {
|
|
printf(": failed to allocate script memory, err=%d\n", err);
|
|
return;
|
|
}
|
|
err = bus_dmamem_map(sc->sc_dmat, &seg, nseg, PAGE_SIZE,
|
|
(caddr_t *)&sc->sc_script, BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
|
|
if (err) {
|
|
printf(": failed to map script memory, err=%d\n", err);
|
|
return;
|
|
}
|
|
err = bus_dmamap_create(sc->sc_dmat, PAGE_SIZE, 1, PAGE_SIZE, 0,
|
|
BUS_DMA_NOWAIT, &sc->sc_scrdma);
|
|
if (err) {
|
|
printf(": failed to create script map, err=%d\n", err);
|
|
return;
|
|
}
|
|
err = bus_dmamap_load(sc->sc_dmat, sc->sc_scrdma,
|
|
sc->sc_script, PAGE_SIZE, NULL, BUS_DMA_NOWAIT);
|
|
if (err) {
|
|
printf(": failed to load script map, err=%d\n", err);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Copy and sync script
|
|
*/
|
|
memcpy(sc->sc_script, osiop_script, sizeof(osiop_script));
|
|
bus_dmamap_sync(sc->sc_dmat, sc->sc_scrdma, 0, sizeof(osiop_script),
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
/*
|
|
* Allocate and map DMA-safe memory for the script data structure.
|
|
*/
|
|
err = bus_dmamem_alloc(sc->sc_dmat,
|
|
sizeof(struct osiop_ds) * OSIOP_NACB, PAGE_SIZE, 0,
|
|
&seg, 1, &nseg, BUS_DMA_NOWAIT);
|
|
if (err) {
|
|
printf(": failed to allocate ds memory, err=%d\n", err);
|
|
return;
|
|
}
|
|
err = bus_dmamem_map(sc->sc_dmat, &seg, nseg,
|
|
sizeof(struct osiop_ds) * OSIOP_NACB, (caddr_t *)&sc->sc_ds,
|
|
BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
|
|
if (err) {
|
|
printf(": failed to map ds memory, err=%d\n", err);
|
|
return;
|
|
}
|
|
err = bus_dmamap_create(sc->sc_dmat,
|
|
sizeof(struct osiop_ds) * OSIOP_NACB, 1,
|
|
sizeof(struct osiop_ds) * OSIOP_NACB, 0,
|
|
BUS_DMA_NOWAIT, &sc->sc_dsdma);
|
|
if (err) {
|
|
printf(": failed to create ds map, err=%d\n", err);
|
|
return;
|
|
}
|
|
err = bus_dmamap_load(sc->sc_dmat, sc->sc_dsdma, sc->sc_ds,
|
|
sizeof(struct osiop_ds) * OSIOP_NACB, NULL, BUS_DMA_NOWAIT);
|
|
if (err) {
|
|
printf(": failed to load ds map, err=%d\n", err);
|
|
return;
|
|
}
|
|
|
|
acb = malloc(sizeof(struct osiop_acb) * OSIOP_NACB,
|
|
M_DEVBUF, M_NOWAIT|M_ZERO);
|
|
if (acb == NULL) {
|
|
printf(": can't allocate memory for acb\n");
|
|
return;
|
|
}
|
|
sc->sc_acb = acb;
|
|
sc->sc_cfflags = sc->sc_dev.dv_cfdata->cf_flags;
|
|
sc->sc_nexus = NULL;
|
|
sc->sc_active = 0;
|
|
memset(sc->sc_tinfo, 0, sizeof(sc->sc_tinfo));
|
|
|
|
/* Initialize command block queue */
|
|
TAILQ_INIT(&sc->ready_list);
|
|
TAILQ_INIT(&sc->nexus_list);
|
|
TAILQ_INIT(&sc->free_list);
|
|
|
|
/* Initialize each command block */
|
|
for (i = 0; i < OSIOP_NACB; i++) {
|
|
bus_addr_t dsa;
|
|
|
|
/* XXX How much size is required for each command block? */
|
|
err = bus_dmamap_create(sc->sc_dmat, PAGE_SIZE, 1, PAGE_SIZE,
|
|
0, BUS_DMA_NOWAIT, &acb->cmddma);
|
|
if (err) {
|
|
printf(": failed to create cmddma map, err=%d\n", err);
|
|
return;
|
|
}
|
|
err = bus_dmamap_create(sc->sc_dmat, OSIOP_MAX_XFER, OSIOP_NSG,
|
|
OSIOP_MAX_XFER, 0, BUS_DMA_NOWAIT, &acb->datadma);
|
|
if (err) {
|
|
printf(": failed to create datadma map, err=%d\n",
|
|
err);
|
|
return;
|
|
}
|
|
|
|
acb->sc = sc;
|
|
acb->ds = &sc->sc_ds[i];
|
|
acb->dsoffset = sizeof(struct osiop_ds) * i;
|
|
|
|
dsa = sc->sc_dsdma->dm_segs[0].ds_addr + acb->dsoffset;
|
|
acb->ds->id.addr = dsa + OSIOP_DSIDOFF;
|
|
acb->ds->status.count = 1;
|
|
acb->ds->status.addr = dsa + OSIOP_DSSTATOFF;
|
|
acb->ds->msg.count = 1;
|
|
acb->ds->msg.addr = dsa + OSIOP_DSMSGOFF;
|
|
acb->ds->msgin.count = 1;
|
|
acb->ds->msgin.addr = dsa + OSIOP_DSMSGINOFF;
|
|
acb->ds->extmsg.count = 1;
|
|
acb->ds->extmsg.addr = dsa + OSIOP_DSEXTMSGOFF;
|
|
acb->ds->synmsg.count = 3;
|
|
acb->ds->synmsg.addr = dsa + OSIOP_DSSYNMSGOFF;
|
|
TAILQ_INSERT_TAIL(&sc->free_list, acb, chain);
|
|
|
|
acb++;
|
|
}
|
|
|
|
printf(": NCR53C710 rev %d, %dMHz, SCSI ID %d\n",
|
|
osiop_read_1(sc, OSIOP_CTEST8) >> 4, sc->sc_clock_freq, sc->sc_id);
|
|
|
|
/*
|
|
* Initialize all
|
|
*/
|
|
osiop_init(sc);
|
|
|
|
/*
|
|
* Fill in the adapter.
|
|
*/
|
|
sc->sc_adapter.adapt_dev = &sc->sc_dev;
|
|
sc->sc_adapter.adapt_nchannels = 1;
|
|
sc->sc_adapter.adapt_openings = OSIOP_NACB;
|
|
sc->sc_adapter.adapt_max_periph = 1;
|
|
sc->sc_adapter.adapt_ioctl = NULL;
|
|
sc->sc_adapter.adapt_minphys = osiop_minphys;
|
|
sc->sc_adapter.adapt_request = osiop_scsipi_request;
|
|
|
|
/*
|
|
* Fill in the channel.
|
|
*/
|
|
sc->sc_channel.chan_adapter = &sc->sc_adapter;
|
|
sc->sc_channel.chan_bustype = &scsi_bustype;
|
|
sc->sc_channel.chan_channel = 0;
|
|
sc->sc_channel.chan_ntargets = OSIOP_NTGT;
|
|
sc->sc_channel.chan_nluns = 8;
|
|
sc->sc_channel.chan_id = sc->sc_id;
|
|
|
|
/*
|
|
* Now try to attach all the sub devices.
|
|
*/
|
|
config_found(&sc->sc_dev, &sc->sc_channel, scsiprint);
|
|
}
|
|
|
|
/*
|
|
* default minphys routine for osiop based controllers
|
|
*/
|
|
void
|
|
osiop_minphys(bp)
|
|
struct buf *bp;
|
|
{
|
|
|
|
if (bp->b_bcount > OSIOP_MAX_XFER)
|
|
bp->b_bcount = OSIOP_MAX_XFER;
|
|
minphys(bp);
|
|
}
|
|
|
|
/*
|
|
* used by specific osiop controller
|
|
*
|
|
*/
|
|
void
|
|
osiop_scsipi_request(chan, req, arg)
|
|
struct scsipi_channel *chan;
|
|
scsipi_adapter_req_t req;
|
|
void *arg;
|
|
{
|
|
struct scsipi_xfer *xs;
|
|
struct scsipi_periph *periph;
|
|
struct osiop_acb *acb;
|
|
struct osiop_softc *sc;
|
|
int err, flags, s;
|
|
|
|
sc = (struct osiop_softc *)chan->chan_adapter->adapt_dev;
|
|
|
|
switch (req) {
|
|
case ADAPTER_REQ_RUN_XFER:
|
|
xs = arg;
|
|
periph = xs->xs_periph;
|
|
flags = xs->xs_control;
|
|
|
|
/* XXXX ?? */
|
|
if (flags & XS_CTL_DATA_UIO)
|
|
panic("osiop: scsi data uio requested");
|
|
|
|
/* XXXX ?? */
|
|
if (sc->sc_nexus && flags & XS_CTL_POLL)
|
|
#if 0
|
|
panic("osiop_scsicmd: busy");
|
|
#else
|
|
printf("osiop_scsicmd: busy\n");
|
|
#endif
|
|
|
|
s = splbio();
|
|
acb = TAILQ_FIRST(&sc->free_list);
|
|
if (acb != NULL) {
|
|
TAILQ_REMOVE(&sc->free_list, acb, chain);
|
|
}
|
|
#ifdef DIAGNOSTIC
|
|
else {
|
|
scsipi_printaddr(periph);
|
|
printf("unable to allocate acb\n");
|
|
panic("osiop_scsipi_request");
|
|
}
|
|
#endif
|
|
|
|
acb->status = ACB_S_READY;
|
|
acb->xs = xs;
|
|
|
|
/* Setup DMA map for SCSI command buffer */
|
|
err = bus_dmamap_load(sc->sc_dmat, acb->cmddma,
|
|
xs->cmd, xs->cmdlen, NULL, BUS_DMA_NOWAIT);
|
|
if (err) {
|
|
printf("%s: unable to load cmd DMA map: %d",
|
|
sc->sc_dev.dv_xname, err);
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
TAILQ_INSERT_TAIL(&sc->free_list, acb, chain);
|
|
scsipi_done(xs);
|
|
splx(s);
|
|
return;
|
|
}
|
|
|
|
/* Setup DMA map for data buffer */
|
|
if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
|
|
err = bus_dmamap_load(sc->sc_dmat, acb->datadma,
|
|
xs->data, xs->datalen, NULL,
|
|
BUS_DMA_NOWAIT | BUS_DMA_STREAMING |
|
|
((xs->xs_control & XS_CTL_DATA_IN) ?
|
|
BUS_DMA_READ : BUS_DMA_WRITE));
|
|
if (err) {
|
|
printf("%s: unable to load data DMA map: %d",
|
|
sc->sc_dev.dv_xname, err);
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
scsipi_done(xs);
|
|
bus_dmamap_unload(sc->sc_dmat, acb->cmddma);
|
|
TAILQ_INSERT_TAIL(&sc->free_list, acb, chain);
|
|
splx(s);
|
|
return;
|
|
}
|
|
bus_dmamap_sync(sc->sc_dmat, acb->datadma,
|
|
0, xs->datalen, (xs->xs_control & XS_CTL_DATA_IN) ?
|
|
BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
|
|
}
|
|
bus_dmamap_sync(sc->sc_dmat, acb->cmddma, 0, xs->cmdlen,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
acb->cmdlen = xs->cmdlen;
|
|
acb->datalen = xs->datalen;
|
|
#ifdef OSIOP_DEBUG
|
|
acb->data = xs->data;
|
|
#endif
|
|
|
|
TAILQ_INSERT_TAIL(&sc->ready_list, acb, chain);
|
|
|
|
if (sc->sc_nexus == NULL)
|
|
osiop_sched(sc);
|
|
|
|
splx(s);
|
|
|
|
if (flags & XS_CTL_POLL || sc->sc_flags & OSIOP_NODMA)
|
|
osiop_poll(sc, acb);
|
|
return;
|
|
|
|
case ADAPTER_REQ_GROW_RESOURCES:
|
|
return;
|
|
|
|
case ADAPTER_REQ_SET_XFER_MODE:
|
|
{
|
|
struct osiop_tinfo *ti;
|
|
struct scsipi_xfer_mode *xm = arg;
|
|
|
|
ti = &sc->sc_tinfo[xm->xm_target];
|
|
|
|
if ((xm->xm_mode & PERIPH_CAP_SYNC) != 0 &&
|
|
(ti->flags & TI_NOSYNC) == 0)
|
|
ti->state = NEG_INIT;
|
|
|
|
/*
|
|
* If we're not going to negotiate, send the
|
|
* notification now, since it won't happen later.
|
|
*/
|
|
if (ti->state == NEG_DONE)
|
|
osiop_update_xfer_mode(sc, xm->xm_target);
|
|
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
void
|
|
osiop_poll(sc, acb)
|
|
struct osiop_softc *sc;
|
|
struct osiop_acb *acb;
|
|
{
|
|
struct scsipi_xfer *xs = acb->xs;
|
|
int status, i, s, to;
|
|
u_int8_t istat, dstat, sstat0;
|
|
|
|
s = splbio();
|
|
to = xs->timeout / 1000;
|
|
if (!TAILQ_EMPTY(&sc->nexus_list))
|
|
printf("%s: osiop_poll called with disconnected device\n",
|
|
sc->sc_dev.dv_xname);
|
|
for (;;) {
|
|
i = 1000;
|
|
while (((istat = osiop_read_1(sc, OSIOP_ISTAT)) &
|
|
(OSIOP_ISTAT_SIP | OSIOP_ISTAT_DIP)) == 0) {
|
|
if (i <= 0) {
|
|
#ifdef OSIOP_DEBUG
|
|
printf("waiting: tgt %d cmd %02x sbcl %02x"
|
|
" dsp %x (+%lx) dcmd %x"
|
|
" ds %p timeout %d\n",
|
|
xs->xs_periph->periph_target,
|
|
xs->cmd->opcode,
|
|
osiop_read_1(sc, OSIOP_SBCL),
|
|
osiop_read_4(sc, OSIOP_DSP),
|
|
osiop_read_4(sc, OSIOP_DSP) -
|
|
sc->sc_scrdma->dm_segs[0].ds_addr,
|
|
osiop_read_1(sc, OSIOP_DCMD),
|
|
acb->ds, acb->xs->timeout);
|
|
#endif
|
|
i = 1000;
|
|
to--;
|
|
if (to <= 0) {
|
|
osiop_reset(sc);
|
|
splx(s);
|
|
return;
|
|
}
|
|
}
|
|
delay(1000);
|
|
i--;
|
|
}
|
|
sstat0 = osiop_read_1(sc, OSIOP_SSTAT0);
|
|
delay(25);
|
|
dstat = osiop_read_1(sc, OSIOP_DSTAT);
|
|
if (osiop_checkintr(sc, istat, dstat, sstat0, &status)) {
|
|
if (acb != sc->sc_nexus)
|
|
printf("%s: osiop_poll disconnected device"
|
|
" completed\n", sc->sc_dev.dv_xname);
|
|
else if ((sc->sc_flags & OSIOP_INTDEFER) == 0) {
|
|
sc->sc_flags &= ~OSIOP_INTSOFF;
|
|
osiop_write_1(sc, OSIOP_SIEN, sc->sc_sien);
|
|
osiop_write_1(sc, OSIOP_DIEN, sc->sc_dien);
|
|
}
|
|
osiop_scsidone(sc->sc_nexus, status);
|
|
}
|
|
|
|
if (xs->xs_status & XS_STS_DONE)
|
|
break;
|
|
}
|
|
|
|
splx(s);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* start next command that's ready
|
|
*/
|
|
void
|
|
osiop_sched(sc)
|
|
struct osiop_softc *sc;
|
|
{
|
|
struct scsipi_periph *periph;
|
|
struct osiop_acb *acb;
|
|
int i;
|
|
|
|
#ifdef OSIOP_DEBUG
|
|
if (sc->sc_nexus != NULL) {
|
|
printf("%s: osiop_sched- nexus %p/%d ready %p/%d\n",
|
|
sc->sc_dev.dv_xname, sc->sc_nexus,
|
|
sc->sc_nexus->xs->xs_periph->periph_target,
|
|
sc->ready_list.tqh_first,
|
|
sc->ready_list.tqh_first->xs->xs_periph->periph_target);
|
|
return;
|
|
}
|
|
#endif
|
|
TAILQ_FOREACH(acb, &sc->ready_list, chain) {
|
|
periph = acb->xs->xs_periph;
|
|
i = periph->periph_target;
|
|
if ((sc->sc_tinfo[i].lubusy & (1 << periph->periph_lun)) == 0) {
|
|
struct osiop_tinfo *ti;
|
|
|
|
TAILQ_REMOVE(&sc->ready_list, acb, chain);
|
|
sc->sc_nexus = acb;
|
|
ti = &sc->sc_tinfo[i];
|
|
ti->lubusy |= (1 << periph->periph_lun);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (acb == NULL) {
|
|
#ifdef OSIOP_DEBUG
|
|
printf("%s: osiop_sched didn't find ready command\n",
|
|
sc->sc_dev.dv_xname);
|
|
#endif
|
|
return;
|
|
}
|
|
|
|
if (acb->xs->xs_control & XS_CTL_RESET)
|
|
osiop_reset(sc);
|
|
|
|
sc->sc_active++;
|
|
osiop_select(sc);
|
|
}
|
|
|
|
void
|
|
osiop_scsidone(acb, status)
|
|
struct osiop_acb *acb;
|
|
int status;
|
|
{
|
|
struct scsipi_xfer *xs;
|
|
struct scsipi_periph *periph;
|
|
struct osiop_softc *sc;
|
|
int dosched = 0;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (acb == NULL || acb->xs == NULL) {
|
|
printf("osiop_scsidone: NULL acb or scsipi_xfer\n");
|
|
#if defined(OSIOP_DEBUG) && defined(DDB)
|
|
Debugger();
|
|
#endif
|
|
return;
|
|
}
|
|
#endif
|
|
xs = acb->xs;
|
|
sc = acb->sc;
|
|
periph = xs->xs_periph;
|
|
|
|
#ifdef OSIOP_DEBUG
|
|
if (acb->status != ACB_S_DONE)
|
|
printf("%s: acb not done (status %d)\n",
|
|
sc->sc_dev.dv_xname, acb->status);
|
|
#endif
|
|
|
|
xs->status = status;
|
|
|
|
switch (status) {
|
|
case SCSI_OK:
|
|
xs->error = XS_NOERROR;
|
|
break;
|
|
case SCSI_BUSY:
|
|
xs->error = XS_BUSY;
|
|
break;
|
|
case SCSI_CHECK:
|
|
xs->error = XS_BUSY;
|
|
break;
|
|
case SCSI_OSIOP_NOCHECK:
|
|
/*
|
|
* don't check status, xs->error is already valid
|
|
*/
|
|
break;
|
|
case SCSI_OSIOP_NOSTATUS:
|
|
/*
|
|
* the status byte was not updated, cmd was
|
|
* aborted
|
|
*/
|
|
xs->error = XS_SELTIMEOUT;
|
|
break;
|
|
default:
|
|
#ifdef OSIOP_DEBUG
|
|
printf("%s: osiop_scsidone: unknown status code (0x%02x)\n",
|
|
sc->sc_dev.dv_xname, status);
|
|
#endif
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
break;
|
|
}
|
|
|
|
if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
|
|
bus_dmamap_sync(sc->sc_dmat, acb->datadma, 0, acb->datalen,
|
|
(xs->xs_control & XS_CTL_DATA_IN) ?
|
|
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sc_dmat, acb->datadma);
|
|
}
|
|
|
|
bus_dmamap_sync(sc->sc_dmat, acb->cmddma, 0, acb->cmdlen,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sc_dmat, acb->cmddma);
|
|
|
|
/*
|
|
* Remove the ACB from whatever queue it's on. We have to do a bit of
|
|
* a hack to figure out which queue it's on. Note that it is *not*
|
|
* necessary to cdr down the ready queue, but we must cdr down the
|
|
* nexus queue and see if it's there, so we can mark the unit as no
|
|
* longer busy. This code is sickening, but it works.
|
|
*/
|
|
if (acb == sc->sc_nexus) {
|
|
sc->sc_nexus = NULL;
|
|
sc->sc_tinfo[periph->periph_target].lubusy &=
|
|
~(1 << periph->periph_lun);
|
|
if (!TAILQ_EMPTY(&sc->ready_list))
|
|
dosched = 1; /* start next command */
|
|
sc->sc_active--;
|
|
OSIOP_TRACE('d', 'a', status, 0);
|
|
} else if (sc->ready_list.tqh_last == &acb->chain.tqe_next) {
|
|
TAILQ_REMOVE(&sc->ready_list, acb, chain);
|
|
OSIOP_TRACE('d', 'r', status, 0);
|
|
} else {
|
|
struct osiop_acb *acb2;
|
|
TAILQ_FOREACH(acb2, &sc->nexus_list, chain) {
|
|
if (acb2 == acb) {
|
|
TAILQ_REMOVE(&sc->nexus_list, acb, chain);
|
|
sc->sc_tinfo[periph->periph_target].lubusy &=
|
|
~(1 << periph->periph_lun);
|
|
sc->sc_active--;
|
|
break;
|
|
}
|
|
}
|
|
if (acb2 == NULL) {
|
|
if (acb->chain.tqe_next != NULL) {
|
|
TAILQ_REMOVE(&sc->ready_list, acb, chain);
|
|
sc->sc_active--;
|
|
} else {
|
|
printf("%s: can't find matching acb\n",
|
|
sc->sc_dev.dv_xname);
|
|
#ifdef DDB
|
|
#if 0
|
|
Debugger();
|
|
#endif
|
|
#endif
|
|
}
|
|
}
|
|
OSIOP_TRACE('d', 'n', status, 0);
|
|
}
|
|
/* Put it on the free list. */
|
|
acb->status = ACB_S_FREE;
|
|
TAILQ_INSERT_TAIL(&sc->free_list, acb, chain);
|
|
sc->sc_tinfo[periph->periph_target].cmds++;
|
|
|
|
callout_stop(&xs->xs_callout);
|
|
xs->resid = 0;
|
|
scsipi_done(xs);
|
|
|
|
if (dosched && sc->sc_nexus == NULL)
|
|
osiop_sched(sc);
|
|
}
|
|
|
|
void
|
|
osiop_abort(sc, where)
|
|
struct osiop_softc *sc;
|
|
const char *where;
|
|
{
|
|
|
|
printf("%s: abort %s: dstat %02x, sstat0 %02x sbcl %02x\n",
|
|
sc->sc_dev.dv_xname, where,
|
|
osiop_read_1(sc, OSIOP_DSTAT),
|
|
osiop_read_1(sc, OSIOP_SSTAT0),
|
|
osiop_read_1(sc, OSIOP_SBCL));
|
|
|
|
/* XXX XXX XXX */
|
|
if (sc->sc_active > 0) {
|
|
sc->sc_active = 0;
|
|
}
|
|
}
|
|
|
|
void
|
|
osiop_init(sc)
|
|
struct osiop_softc *sc;
|
|
{
|
|
int i, inhibit_sync, inhibit_disc;
|
|
|
|
sc->sc_tcp[1] = 1000 / sc->sc_clock_freq;
|
|
sc->sc_tcp[2] = 1500 / sc->sc_clock_freq;
|
|
sc->sc_tcp[3] = 2000 / sc->sc_clock_freq;
|
|
sc->sc_minsync = sc->sc_tcp[1]; /* in 4ns units */
|
|
|
|
if (sc->sc_minsync < 25)
|
|
sc->sc_minsync = 25;
|
|
|
|
if (sc->sc_clock_freq <= 25) {
|
|
sc->sc_dcntl |= OSIOP_DCNTL_CF_1; /* SCLK/1 */
|
|
sc->sc_tcp[0] = sc->sc_tcp[1];
|
|
} else if (sc->sc_clock_freq <= 37) {
|
|
sc->sc_dcntl |= OSIOP_DCNTL_CF_1_5; /* SCLK/1.5 */
|
|
sc->sc_tcp[0] = sc->sc_tcp[2];
|
|
} else if (sc->sc_clock_freq <= 50) {
|
|
sc->sc_dcntl |= OSIOP_DCNTL_CF_2; /* SCLK/2 */
|
|
sc->sc_tcp[0] = sc->sc_tcp[3];
|
|
} else {
|
|
sc->sc_dcntl |= OSIOP_DCNTL_CF_3; /* SCLK/3 */
|
|
sc->sc_tcp[0] = 3000 / sc->sc_clock_freq;
|
|
}
|
|
|
|
if ((sc->sc_cfflags & 0x10000) != 0) {
|
|
sc->sc_flags |= OSIOP_NODMA;
|
|
#ifdef OSIOP_DEBUG
|
|
printf("%s: DMA disabled; use polling\n",
|
|
sc->sc_dev.dv_xname);
|
|
#endif
|
|
}
|
|
|
|
inhibit_sync = (sc->sc_cfflags & 0xff00) >> 8; /* XXX */
|
|
inhibit_disc = sc->sc_cfflags & 0x00ff; /* XXX */
|
|
#ifdef OSIOP_DEBUG
|
|
if (inhibit_sync != 0)
|
|
printf("%s: Inhibiting synchronous transfer: 0x%02x\n",
|
|
sc->sc_dev.dv_xname, inhibit_sync);
|
|
if (inhibit_disc != 0)
|
|
printf("%s: Inhibiting disconnect: 0x%02x\n",
|
|
sc->sc_dev.dv_xname, inhibit_disc);
|
|
#endif
|
|
for (i = 0; i < OSIOP_NTGT; i++) {
|
|
if (inhibit_sync & (1 << i))
|
|
sc->sc_tinfo[i].flags |= TI_NOSYNC;
|
|
if (inhibit_disc & (1 << i))
|
|
sc->sc_tinfo[i].flags |= TI_NODISC;
|
|
}
|
|
|
|
osiop_resetbus(sc);
|
|
osiop_reset(sc);
|
|
}
|
|
|
|
void
|
|
osiop_reset(sc)
|
|
struct osiop_softc *sc;
|
|
{
|
|
struct osiop_acb *acb;
|
|
int i, s;
|
|
u_int8_t stat;
|
|
|
|
#ifdef OSIOP_DEBUG
|
|
printf("%s: resetting chip\n", sc->sc_dev.dv_xname);
|
|
#endif
|
|
if (sc->sc_flags & OSIOP_ALIVE)
|
|
osiop_abort(sc, "reset");
|
|
|
|
s = splbio();
|
|
|
|
/*
|
|
* Reset the chip
|
|
* XXX - is this really needed?
|
|
*/
|
|
|
|
/* abort current script */
|
|
osiop_write_1(sc, OSIOP_ISTAT,
|
|
osiop_read_1(sc, OSIOP_ISTAT) | OSIOP_ISTAT_ABRT);
|
|
/* reset chip */
|
|
osiop_write_1(sc, OSIOP_ISTAT,
|
|
osiop_read_1(sc, OSIOP_ISTAT) | OSIOP_ISTAT_RST);
|
|
delay(100);
|
|
osiop_write_1(sc, OSIOP_ISTAT,
|
|
osiop_read_1(sc, OSIOP_ISTAT) & ~OSIOP_ISTAT_RST);
|
|
delay(100);
|
|
|
|
/*
|
|
* Set up various chip parameters
|
|
*/
|
|
osiop_write_1(sc, OSIOP_SCNTL0,
|
|
OSIOP_ARB_FULL | OSIOP_SCNTL0_EPC | OSIOP_SCNTL0_EPG);
|
|
osiop_write_1(sc, OSIOP_SCNTL1, OSIOP_SCNTL1_ESR);
|
|
osiop_write_1(sc, OSIOP_DCNTL, sc->sc_dcntl);
|
|
osiop_write_1(sc, OSIOP_DMODE, OSIOP_DMODE_BL4);
|
|
/* don't enable interrupts yet */
|
|
osiop_write_1(sc, OSIOP_SIEN, 0x00);
|
|
osiop_write_1(sc, OSIOP_DIEN, 0x00);
|
|
osiop_write_1(sc, OSIOP_SCID, OSIOP_SCID_VALUE(sc->sc_id));
|
|
osiop_write_1(sc, OSIOP_DWT, 0x00);
|
|
osiop_write_1(sc, OSIOP_CTEST0, osiop_read_1(sc, OSIOP_CTEST0)
|
|
| OSIOP_CTEST0_BTD | OSIOP_CTEST0_EAN);
|
|
osiop_write_1(sc, OSIOP_CTEST7,
|
|
osiop_read_1(sc, OSIOP_CTEST7) | sc->sc_ctest7);
|
|
|
|
/* will need to re-negotiate sync xfers */
|
|
for (i = 0; i < OSIOP_NTGT; i++) {
|
|
sc->sc_tinfo[i].state = NEG_INIT;
|
|
sc->sc_tinfo[i].period = 0;
|
|
sc->sc_tinfo[i].offset = 0;
|
|
}
|
|
|
|
stat = osiop_read_1(sc, OSIOP_ISTAT);
|
|
if (stat & OSIOP_ISTAT_SIP)
|
|
osiop_read_1(sc, OSIOP_SSTAT0);
|
|
delay(25);
|
|
if (stat & OSIOP_ISTAT_DIP)
|
|
osiop_read_1(sc, OSIOP_DSTAT);
|
|
|
|
splx(s);
|
|
|
|
delay(osiop_reset_delay * 1000);
|
|
|
|
if (sc->sc_nexus != NULL) {
|
|
sc->sc_nexus->xs->error =
|
|
(sc->sc_nexus->flags & ACB_F_TIMEOUT) ?
|
|
XS_TIMEOUT : XS_RESET;
|
|
sc->sc_nexus->status = ACB_S_DONE;
|
|
sc->sc_nexus->flags = 0;
|
|
osiop_scsidone(sc->sc_nexus, SCSI_OSIOP_NOCHECK);
|
|
}
|
|
while ((acb = TAILQ_FIRST(&sc->nexus_list)) != NULL) {
|
|
acb->xs->error = (acb->flags & ACB_F_TIMEOUT) ?
|
|
XS_TIMEOUT : XS_RESET;
|
|
acb->status = ACB_S_DONE;
|
|
acb->flags = 0;
|
|
osiop_scsidone(acb, SCSI_OSIOP_NOCHECK);
|
|
}
|
|
|
|
sc->sc_flags &= ~(OSIOP_INTDEFER | OSIOP_INTSOFF);
|
|
/* enable SCSI and DMA interrupts */
|
|
sc->sc_sien = OSIOP_SIEN_M_A | OSIOP_SIEN_STO | /*OSIOP_SIEN_SEL |*/
|
|
OSIOP_SIEN_SGE | OSIOP_SIEN_UDC | OSIOP_SIEN_RST | OSIOP_SIEN_PAR;
|
|
sc->sc_dien = OSIOP_DIEN_BF | OSIOP_DIEN_ABRT | OSIOP_DIEN_SIR |
|
|
/*OSIOP_DIEN_WTD |*/ OSIOP_DIEN_IID;
|
|
osiop_write_1(sc, OSIOP_SIEN, sc->sc_sien);
|
|
osiop_write_1(sc, OSIOP_DIEN, sc->sc_dien);
|
|
}
|
|
|
|
void
|
|
osiop_resetbus(sc)
|
|
struct osiop_softc *sc;
|
|
{
|
|
|
|
osiop_write_1(sc, OSIOP_SIEN, 0);
|
|
osiop_write_1(sc, OSIOP_SCNTL1,
|
|
osiop_read_1(sc, OSIOP_SCNTL1) | OSIOP_SCNTL1_RST);
|
|
delay(25);
|
|
osiop_write_1(sc, OSIOP_SCNTL1,
|
|
osiop_read_1(sc, OSIOP_SCNTL1) & ~OSIOP_SCNTL1_RST);
|
|
}
|
|
|
|
/*
|
|
* Setup Data Storage for 53C710 and start SCRIPTS processing
|
|
*/
|
|
|
|
void
|
|
osiop_start(sc)
|
|
struct osiop_softc *sc;
|
|
{
|
|
struct osiop_acb *acb = sc->sc_nexus;
|
|
struct osiop_ds *ds = acb->ds;
|
|
struct scsipi_xfer *xs = acb->xs;
|
|
bus_dmamap_t dsdma = sc->sc_dsdma, datadma = acb->datadma;
|
|
struct osiop_tinfo *ti;
|
|
int target = xs->xs_periph->periph_target;
|
|
int lun = xs->xs_periph->periph_lun;
|
|
int disconnect, i;
|
|
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_DISC &&
|
|
osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
|
|
printf("ACK! osiop was busy: script %p dsa %p active %d\n",
|
|
sc->sc_script, acb->ds, sc->sc_active);
|
|
printf("istat %02x sfbr %02x lcrc %02x sien %02x dien %02x\n",
|
|
osiop_read_1(sc, OSIOP_ISTAT),
|
|
osiop_read_1(sc, OSIOP_SFBR),
|
|
osiop_read_1(sc, OSIOP_LCRC),
|
|
osiop_read_1(sc, OSIOP_SIEN),
|
|
osiop_read_1(sc, OSIOP_DIEN));
|
|
#ifdef DDB
|
|
#if 0
|
|
Debugger();
|
|
#endif
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#ifdef OSIOP_DEBUG
|
|
if (acb->status != ACB_S_READY)
|
|
panic("osiop_start: non-ready cmd in acb");
|
|
#endif
|
|
|
|
acb->intstat = 0;
|
|
|
|
ds->cmd.count = acb->cmdlen;
|
|
ds->cmd.addr = acb->cmddma->dm_segs[0].ds_addr;
|
|
|
|
ti = &sc->sc_tinfo[target];
|
|
ds->scsi_addr = ((1 << 16) << target) | (ti->sxfer << 8);
|
|
|
|
disconnect = (xs->xs_control & XS_CTL_REQSENSE) == 0 &&
|
|
(ti->flags & TI_NODISC) == 0;
|
|
|
|
ds->msgout[0] = MSG_IDENTIFY(lun, disconnect);
|
|
ds->id.count = 1;
|
|
ds->stat[0] = SCSI_OSIOP_NOSTATUS; /* set invalid status */
|
|
ds->msgbuf[0] = ds->msgbuf[1] = MSG_INVALID;
|
|
memset(&ds->data, 0, sizeof(ds->data));
|
|
|
|
/*
|
|
* Negotiate wide is the initial negotiation state; since the 53c710
|
|
* doesn't do wide transfers, just begin the synchronous transfer
|
|
* negotiation here.
|
|
*/
|
|
if (ti->state == NEG_INIT) {
|
|
if ((ti->flags & TI_NOSYNC) != 0) {
|
|
ti->state = NEG_DONE;
|
|
ti->sbcl = 0;
|
|
ti->sxfer = 0;
|
|
ti->period = 0;
|
|
ti->offset = 0;
|
|
osiop_update_xfer_mode(sc, target);
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiopsync_debug)
|
|
printf("Forcing target %d asynchronous\n",
|
|
target);
|
|
#endif
|
|
} else {
|
|
ds->msgbuf[2] = MSG_INVALID;
|
|
ds->msgout[1] = MSG_EXTENDED;
|
|
ds->msgout[2] = MSG_EXT_SDTR_LEN;
|
|
ds->msgout[3] = MSG_EXT_SDTR;
|
|
ds->msgout[4] = sc->sc_minsync;
|
|
ds->msgout[5] = OSIOP_MAX_OFFSET;
|
|
ds->id.count = MSG_EXT_SDTR_LEN + 3;
|
|
ti->state = NEG_WAITS;
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiopsync_debug)
|
|
printf("Sending sync request to target %d\n",
|
|
target);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
acb->curaddr = 0;
|
|
acb->curlen = 0;
|
|
|
|
/*
|
|
* Build physical DMA addresses for scatter/gather I/O
|
|
*/
|
|
if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
|
|
for (i = 0; i < datadma->dm_nsegs; i++) {
|
|
ds->data[i].count = datadma->dm_segs[i].ds_len;
|
|
ds->data[i].addr = datadma->dm_segs[i].ds_addr;
|
|
}
|
|
}
|
|
|
|
/* sync script data structure */
|
|
bus_dmamap_sync(sc->sc_dmat, dsdma,
|
|
acb->dsoffset, sizeof(struct osiop_ds),
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
acb->status = ACB_S_ACTIVE;
|
|
|
|
/* handle timeout */
|
|
if ((xs->xs_control & XS_CTL_POLL) == 0) {
|
|
int timeout = mstohz(acb->xs->timeout);
|
|
/* start expire timer */
|
|
if (timeout == 0)
|
|
timeout = 1;
|
|
callout_reset(&xs->xs_callout, timeout,
|
|
osiop_timeout, acb);
|
|
}
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_DISC &&
|
|
osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
|
|
printf("ACK! osiop was busy at start: "
|
|
"script %p dsa %p active %d\n",
|
|
sc->sc_script, acb->ds, sc->sc_active);
|
|
#ifdef DDB
|
|
#if 0
|
|
Debugger();
|
|
#endif
|
|
#endif
|
|
}
|
|
#endif
|
|
if (TAILQ_EMPTY(&sc->nexus_list)) {
|
|
if (osiop_read_1(sc, OSIOP_ISTAT) & OSIOP_ISTAT_CON)
|
|
printf("%s: osiop_select while connected?\n",
|
|
sc->sc_dev.dv_xname);
|
|
osiop_write_4(sc, OSIOP_TEMP, 0);
|
|
osiop_write_1(sc, OSIOP_SBCL, ti->sbcl);
|
|
osiop_write_4(sc, OSIOP_DSA,
|
|
dsdma->dm_segs[0].ds_addr + acb->dsoffset);
|
|
osiop_write_4(sc, OSIOP_DSP,
|
|
sc->sc_scrdma->dm_segs[0].ds_addr + Ent_scripts);
|
|
OSIOP_TRACE('s', 1, 0, 0);
|
|
} else {
|
|
if ((osiop_read_1(sc, OSIOP_ISTAT) & OSIOP_ISTAT_CON) == 0) {
|
|
osiop_write_1(sc, OSIOP_ISTAT, OSIOP_ISTAT_SIGP);
|
|
OSIOP_TRACE('s', 2, 0, 0);
|
|
} else {
|
|
OSIOP_TRACE('s', 3,
|
|
osiop_read_1(sc, OSIOP_ISTAT), 0);
|
|
}
|
|
}
|
|
#ifdef OSIOP_DEBUG
|
|
osiopstarts++;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Process a DMA or SCSI interrupt from the 53C710 SIOP
|
|
*/
|
|
|
|
int
|
|
osiop_checkintr(sc, istat, dstat, sstat0, status)
|
|
struct osiop_softc *sc;
|
|
u_int8_t istat;
|
|
u_int8_t dstat;
|
|
u_int8_t sstat0;
|
|
int *status;
|
|
{
|
|
struct osiop_acb *acb = sc->sc_nexus;
|
|
struct osiop_ds *ds = NULL; /* XXX */
|
|
bus_dmamap_t dsdma = sc->sc_dsdma;
|
|
bus_addr_t scraddr = sc->sc_scrdma->dm_segs[0].ds_addr;
|
|
int target = 0;
|
|
int dfifo, dbc, intcode, sstat1;
|
|
|
|
dfifo = osiop_read_1(sc, OSIOP_DFIFO);
|
|
dbc = osiop_read_4(sc, OSIOP_DBC) & 0x00ffffff;
|
|
sstat1 = osiop_read_1(sc, OSIOP_SSTAT1);
|
|
osiop_write_1(sc, OSIOP_CTEST8,
|
|
osiop_read_1(sc, OSIOP_CTEST8) | OSIOP_CTEST8_CLF);
|
|
while ((osiop_read_1(sc, OSIOP_CTEST1) & OSIOP_CTEST1_FMT) !=
|
|
OSIOP_CTEST1_FMT)
|
|
;
|
|
osiop_write_1(sc, OSIOP_CTEST8,
|
|
osiop_read_1(sc, OSIOP_CTEST8) & ~OSIOP_CTEST8_CLF);
|
|
intcode = osiop_read_4(sc, OSIOP_DSPS);
|
|
#ifdef OSIOP_DEBUG
|
|
osiopints++;
|
|
if (osiop_read_4(sc, OSIOP_DSP) != 0 &&
|
|
(osiop_read_4(sc, OSIOP_DSP) < scraddr ||
|
|
osiop_read_4(sc, OSIOP_DSP) >= scraddr + sizeof(osiop_script))) {
|
|
printf("%s: dsp not within script dsp %x scripts %lx:%lx",
|
|
sc->sc_dev.dv_xname,
|
|
osiop_read_4(sc, OSIOP_DSP),
|
|
scraddr, scraddr + sizeof(osiop_script));
|
|
printf(" istat %x dstat %x sstat0 %x\n", istat, dstat, sstat0);
|
|
#ifdef DDB
|
|
Debugger();
|
|
#endif
|
|
}
|
|
#endif
|
|
OSIOP_TRACE('i', dstat, istat, (istat & OSIOP_ISTAT_DIP) ?
|
|
intcode & 0xff : sstat0);
|
|
|
|
if (acb != NULL) { /* XXX */
|
|
ds = acb->ds;
|
|
bus_dmamap_sync(sc->sc_dmat, dsdma,
|
|
acb->dsoffset, sizeof(struct osiop_ds),
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
#ifdef OSIOP_DEBUG
|
|
if (acb->status != ACB_S_ACTIVE)
|
|
printf("osiop_checkintr: acb not active (status %d)\n",
|
|
acb->status);
|
|
#endif
|
|
}
|
|
|
|
|
|
if (dstat & OSIOP_DSTAT_SIR && intcode == A_ok) {
|
|
/* Normal completion status, or check condition */
|
|
struct osiop_tinfo *ti;
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_read_4(sc, OSIOP_DSA) !=
|
|
dsdma->dm_segs[0].ds_addr + acb->dsoffset) {
|
|
printf("osiop: invalid dsa: %x %lx\n",
|
|
osiop_read_4(sc, OSIOP_DSA),
|
|
dsdma->dm_segs[0].ds_addr + acb->dsoffset);
|
|
panic("*** osiop DSA invalid ***");
|
|
}
|
|
#endif
|
|
target = acb->xs->xs_periph->periph_target;
|
|
ti = &sc->sc_tinfo[target];
|
|
if (ti->state == NEG_WAITS) {
|
|
if (ds->msgbuf[1] == MSG_INVALID)
|
|
printf("%s: target %d ignored sync request\n",
|
|
sc->sc_dev.dv_xname, target);
|
|
else if (ds->msgbuf[1] == MSG_MESSAGE_REJECT)
|
|
printf("%s: target %d rejected sync request\n",
|
|
sc->sc_dev.dv_xname, target);
|
|
ti->period = 0;
|
|
ti->offset = 0;
|
|
osiop_update_xfer_mode(sc, target);
|
|
ti->state = NEG_DONE;
|
|
}
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
|
|
#if 0
|
|
printf("ACK! osiop was busy at end: "
|
|
"script %p dsa %p\n", &osiop_script, ds);
|
|
#ifdef DDB
|
|
Debugger();
|
|
#endif
|
|
#endif
|
|
}
|
|
if (ds->msgbuf[0] != MSG_CMDCOMPLETE)
|
|
printf("%s: message was not COMMAND COMPLETE: %02x\n",
|
|
sc->sc_dev.dv_xname, ds->msgbuf[0]);
|
|
#endif
|
|
if (!TAILQ_EMPTY(&sc->nexus_list))
|
|
osiop_write_1(sc, OSIOP_DCNTL,
|
|
osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
|
|
*status = ds->stat[0];
|
|
acb->status = ACB_S_DONE;
|
|
return (1);
|
|
}
|
|
if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_syncmsg) {
|
|
target = acb->xs->xs_periph->periph_target;
|
|
if (ds->msgbuf[1] == MSG_EXTENDED &&
|
|
ds->msgbuf[2] == MSG_EXT_SDTR_LEN &&
|
|
ds->msgbuf[3] == MSG_EXT_SDTR) {
|
|
struct osiop_tinfo *ti = &sc->sc_tinfo[target];
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiopsync_debug)
|
|
printf("sync msg in: "
|
|
"%02x %02x %02x %02x %02x %02x\n",
|
|
ds->msgbuf[0], ds->msgbuf[1],
|
|
ds->msgbuf[2], ds->msgbuf[3],
|
|
ds->msgbuf[4], ds->msgbuf[5]);
|
|
#endif
|
|
ti->period = ds->msgbuf[4];
|
|
ti->offset = ds->msgbuf[5];
|
|
ti->sxfer = 0;
|
|
ti->sbcl = 0;
|
|
if (ds->msgbuf[5] != 0)
|
|
scsi_period_to_osiop(sc, target);
|
|
osiop_update_xfer_mode(sc, target);
|
|
|
|
bus_dmamap_sync(sc->sc_dmat, dsdma,
|
|
acb->dsoffset, sizeof(struct osiop_ds),
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
osiop_write_1(sc, OSIOP_SXFER, ti->sxfer);
|
|
osiop_write_1(sc, OSIOP_SBCL, ti->sbcl);
|
|
if (ti->state == NEG_WAITS) {
|
|
ti->state = NEG_DONE;
|
|
osiop_write_4(sc, OSIOP_DSP,
|
|
scraddr + Ent_clear_ack);
|
|
return (0);
|
|
}
|
|
osiop_write_1(sc, OSIOP_DCNTL,
|
|
osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
|
|
ti->state = NEG_DONE;
|
|
return (0);
|
|
}
|
|
/* XXX - not SDTR message */
|
|
}
|
|
if (sstat0 & OSIOP_SSTAT0_M_A) {
|
|
/* Phase mismatch */
|
|
#ifdef OSIOP_DEBUG
|
|
osiopphmm++;
|
|
if (acb == NULL)
|
|
printf("%s: Phase mismatch with no active command?\n",
|
|
sc->sc_dev.dv_xname);
|
|
#endif
|
|
if (acb->datalen > 0) {
|
|
int adjust = (dfifo - (dbc & 0x7f)) & 0x7f;
|
|
if (sstat1 & OSIOP_SSTAT1_ORF)
|
|
adjust++;
|
|
if (sstat1 & OSIOP_SSTAT1_OLF)
|
|
adjust++;
|
|
acb->curaddr = osiop_read_4(sc, OSIOP_DNAD) - adjust;
|
|
acb->curlen = dbc + adjust;
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_DISC) {
|
|
printf("Phase mismatch: curaddr %lx "
|
|
"curlen %lx dfifo %x dbc %x sstat1 %x "
|
|
"adjust %x sbcl %x starts %d acb %p\n",
|
|
acb->curaddr, acb->curlen, dfifo,
|
|
dbc, sstat1, adjust,
|
|
osiop_read_1(sc, OSIOP_SBCL),
|
|
osiopstarts, acb);
|
|
if (ds->data[1].count != 0) {
|
|
int i;
|
|
for (i = 0; ds->data[i].count != 0; i++)
|
|
printf("chain[%d] "
|
|
"addr %x len %x\n", i,
|
|
ds->data[i].addr,
|
|
ds->data[i].count);
|
|
}
|
|
bus_dmamap_sync(sc->sc_dmat, dsdma,
|
|
acb->dsoffset, sizeof(struct osiop_ds),
|
|
BUS_DMASYNC_PREREAD |
|
|
BUS_DMASYNC_PREWRITE);
|
|
}
|
|
#endif
|
|
}
|
|
#ifdef OSIOP_DEBUG
|
|
OSIOP_TRACE('m', osiop_read_1(sc, OSIOP_SBCL),
|
|
osiop_read_4(sc, OSIOP_DSP) >> 8,
|
|
osiop_read_4(sc, OSIOP_DSP));
|
|
if (osiop_debug & DEBUG_PHASE)
|
|
printf("Phase mismatch: %x dsp +%lx dcmd %x\n",
|
|
osiop_read_1(sc, OSIOP_SBCL),
|
|
osiop_read_4(sc, OSIOP_DSP) - scraddr,
|
|
osiop_read_4(sc, OSIOP_DBC));
|
|
#endif
|
|
if ((osiop_read_1(sc, OSIOP_SBCL) & OSIOP_REQ) == 0) {
|
|
printf("Phase mismatch: "
|
|
"REQ not asserted! %02x dsp %x\n",
|
|
osiop_read_1(sc, OSIOP_SBCL),
|
|
osiop_read_4(sc, OSIOP_DSP));
|
|
#if defined(OSIOP_DEBUG) && defined(DDB)
|
|
/*Debugger(); XXX is*/
|
|
#endif
|
|
}
|
|
switch (OSIOP_PHASE(osiop_read_1(sc, OSIOP_SBCL))) {
|
|
case DATA_OUT_PHASE:
|
|
case DATA_IN_PHASE:
|
|
case STATUS_PHASE:
|
|
case COMMAND_PHASE:
|
|
case MSG_IN_PHASE:
|
|
case MSG_OUT_PHASE:
|
|
osiop_write_4(sc, OSIOP_DSP, scraddr + Ent_switch);
|
|
break;
|
|
default:
|
|
printf("%s: invalid phase\n", sc->sc_dev.dv_xname);
|
|
goto bad_phase;
|
|
}
|
|
return (0);
|
|
}
|
|
if (sstat0 & OSIOP_SSTAT0_STO) {
|
|
/* Select timed out */
|
|
#ifdef OSIOP_DEBUG
|
|
if (acb == NULL)
|
|
printf("%s: Select timeout with no active command?\n",
|
|
sc->sc_dev.dv_xname);
|
|
if (osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
|
|
printf("ACK! osiop was busy at timeout: "
|
|
"script %p dsa %lx\n", sc->sc_script,
|
|
dsdma->dm_segs[0].ds_addr + acb->dsoffset);
|
|
printf(" sbcl %x sdid %x "
|
|
"istat %x dstat %x sstat0 %x\n",
|
|
osiop_read_1(sc, OSIOP_SBCL),
|
|
osiop_read_1(sc, OSIOP_SDID),
|
|
istat, dstat, sstat0);
|
|
if ((osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) == 0) {
|
|
printf("Yikes, it's not busy now!\n");
|
|
#if 0
|
|
*status = SCSI_OSIOP_NOSTATUS;
|
|
if (!TAILQ_EMPTY(&sc->nexus_list))
|
|
osiop_write_4(sc, OSIOP_DSP,
|
|
scraddr + Ent_wait_reselect);
|
|
return (1);
|
|
#endif
|
|
}
|
|
#if 0
|
|
osiop_write_1(sc, OSIOP_DCNTL,
|
|
osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
|
|
#endif
|
|
#ifdef DDB
|
|
Debugger();
|
|
#endif
|
|
return (0);
|
|
}
|
|
#endif
|
|
acb->status = ACB_S_DONE;
|
|
*status = SCSI_OSIOP_NOSTATUS;
|
|
acb->xs->error = XS_SELTIMEOUT;
|
|
if (!TAILQ_EMPTY(&sc->nexus_list))
|
|
osiop_write_4(sc, OSIOP_DSP,
|
|
scraddr + Ent_wait_reselect);
|
|
return (1);
|
|
}
|
|
if (acb != NULL)
|
|
target = acb->xs->xs_periph->periph_target;
|
|
else
|
|
target = sc->sc_id;
|
|
if (sstat0 & OSIOP_SSTAT0_UDC) {
|
|
#ifdef OSIOP_DEBUG
|
|
if (acb == NULL)
|
|
printf("%s: Unexpected disconnect "
|
|
"with no active command?\n", sc->sc_dev.dv_xname);
|
|
printf("%s: target %d disconnected unexpectedly\n",
|
|
sc->sc_dev.dv_xname, target);
|
|
#endif
|
|
#if 0
|
|
osiop_abort(sc, "osiop_chkintr");
|
|
#endif
|
|
*status = SCSI_CHECK;
|
|
if (!TAILQ_EMPTY(&sc->nexus_list))
|
|
osiop_write_4(sc, OSIOP_DSP,
|
|
scraddr + Ent_wait_reselect);
|
|
return (acb != NULL);
|
|
}
|
|
if (dstat & OSIOP_DSTAT_SIR &&
|
|
(intcode == A_int_disc || intcode == A_int_disc_wodp)) {
|
|
/* Disconnect */
|
|
if (acb == NULL) {
|
|
printf("%s: Disconnect with no active command?\n",
|
|
sc->sc_dev.dv_xname);
|
|
return (0);
|
|
}
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_DISC) {
|
|
printf("%s: ID %02x disconnected TEMP %x (+%lx) "
|
|
"curaddr %lx curlen %lx buf %x len %x dfifo %x "
|
|
"dbc %x sstat1 %x starts %d acb %p\n",
|
|
sc->sc_dev.dv_xname, 1 << target,
|
|
osiop_read_4(sc, OSIOP_TEMP),
|
|
(osiop_read_4(sc, OSIOP_TEMP) != 0) ?
|
|
osiop_read_4(sc, OSIOP_TEMP) - scraddr : 0,
|
|
acb->curaddr, acb->curlen,
|
|
ds->data[0].addr, ds->data[0].count,
|
|
dfifo, dbc, sstat1, osiopstarts, acb);
|
|
bus_dmamap_sync(sc->sc_dmat, dsdma,
|
|
acb->dsoffset, sizeof(struct osiop_ds),
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
}
|
|
#endif
|
|
/*
|
|
* XXXX need to update curaddr/curlen to reflect
|
|
* current data transferred. If device disconnected in
|
|
* the middle of a DMA block, they should already be set
|
|
* by the phase change interrupt. If the disconnect
|
|
* occurs on a DMA block boundary, we have to figure out
|
|
* which DMA block it was.
|
|
*/
|
|
if (acb->datalen > 0 &&
|
|
osiop_read_4(sc, OSIOP_TEMP) != 0) {
|
|
long n = osiop_read_4(sc, OSIOP_TEMP) - scraddr;
|
|
|
|
if (acb->curlen != 0 &&
|
|
acb->curlen != ds->data[0].count)
|
|
printf("%s: curaddr/curlen already set? "
|
|
"n %lx iob %lx/%lx chain[0] %x/%x\n",
|
|
sc->sc_dev.dv_xname, n,
|
|
acb->curaddr, acb->curlen,
|
|
ds->data[0].addr, ds->data[0].count);
|
|
if (n < Ent_datain)
|
|
n = (n - Ent_dataout) / 16;
|
|
else
|
|
n = (n - Ent_datain) / 16;
|
|
if (n < 0 || n >= OSIOP_NSG)
|
|
printf("TEMP invalid %ld\n", n);
|
|
else {
|
|
acb->curaddr = ds->data[n].addr;
|
|
acb->curlen = ds->data[n].count;
|
|
}
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_DISC) {
|
|
printf("%s: TEMP offset %ld",
|
|
sc->sc_dev.dv_xname, n);
|
|
printf(" curaddr %lx curlen %lx\n",
|
|
acb->curaddr, acb->curlen);
|
|
}
|
|
#endif
|
|
}
|
|
/*
|
|
* If data transfer was interrupted by disconnect, curaddr
|
|
* and curlen should reflect the point of interruption.
|
|
* Adjust the DMA chain so that the data transfer begins
|
|
* at the appropriate place upon reselection.
|
|
* XXX This should only be done on save data pointer message?
|
|
*/
|
|
if (acb->curlen > 0) {
|
|
int i, j;
|
|
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_DISC)
|
|
printf("%s: adjusting DMA chain\n",
|
|
sc->sc_dev.dv_xname);
|
|
if (intcode == A_int_disc_wodp)
|
|
printf("%s: ID %02x disconnected "
|
|
"without Save Data Pointers\n",
|
|
sc->sc_dev.dv_xname, 1 << target);
|
|
#endif
|
|
for (i = 0; i < OSIOP_NSG; i++) {
|
|
if (ds->data[i].count == 0)
|
|
break;
|
|
if (acb->curaddr >= ds->data[i].addr &&
|
|
acb->curaddr <
|
|
(ds->data[i].addr + ds->data[i].count))
|
|
break;
|
|
}
|
|
if (i >= OSIOP_NSG || ds->data[i].count == 0) {
|
|
printf("couldn't find saved data pointer: "
|
|
"curaddr %lx curlen %lx i %d\n",
|
|
acb->curaddr, acb->curlen, i);
|
|
#ifdef DDB
|
|
Debugger();
|
|
#endif
|
|
}
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_DISC)
|
|
printf(" chain[0]: %x/%x -> %lx/%lx\n",
|
|
ds->data[0].addr, ds->data[0].count,
|
|
acb->curaddr, acb->curlen);
|
|
#endif
|
|
ds->data[0].addr = acb->curaddr;
|
|
ds->data[0].count = acb->curlen;
|
|
for (j = 1, i = i + 1;
|
|
i < OSIOP_NSG && ds->data[i].count > 0;
|
|
i++, j++) {
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_DISC)
|
|
printf(" chain[%d]: %x/%x -> %x/%x\n",
|
|
j, ds->data[j].addr,
|
|
ds->data[j].count,
|
|
ds->data[i].addr,
|
|
ds->data[i].count);
|
|
#endif
|
|
ds->data[j].addr = ds->data[i].addr;
|
|
ds->data[j].count = ds->data[i].count;
|
|
}
|
|
if (j < OSIOP_NSG) {
|
|
ds->data[j].addr = 0;
|
|
ds->data[j].count = 0;
|
|
}
|
|
bus_dmamap_sync(sc->sc_dmat, dsdma,
|
|
acb->dsoffset, sizeof(struct osiop_ds),
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
}
|
|
sc->sc_tinfo[target].dconns++;
|
|
/*
|
|
* add nexus to waiting list
|
|
* clear nexus
|
|
* try to start another command for another target/lun
|
|
*/
|
|
acb->intstat = sc->sc_flags & OSIOP_INTSOFF;
|
|
TAILQ_INSERT_TAIL(&sc->nexus_list, acb, chain);
|
|
sc->sc_nexus = NULL; /* no current device */
|
|
osiop_write_4(sc, OSIOP_DSP, scraddr + Ent_wait_reselect);
|
|
/* XXXX start another command ? */
|
|
if (!TAILQ_EMPTY(&sc->ready_list))
|
|
osiop_sched(sc);
|
|
return (0);
|
|
}
|
|
if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_reconnect) {
|
|
int reselid = ffs(osiop_read_4(sc, OSIOP_SCRATCH) & 0xff) - 1;
|
|
int reselun = osiop_read_1(sc, OSIOP_SFBR) & 0x07;
|
|
#ifdef OSIOP_DEBUG
|
|
u_int8_t resmsg;
|
|
#endif
|
|
|
|
/* Reconnect */
|
|
/* XXXX save current SBCL */
|
|
sc->sc_sstat1 = osiop_read_1(sc, OSIOP_SBCL);
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_DISC)
|
|
printf("%s: target ID %02x reselected dsps %x\n",
|
|
sc->sc_dev.dv_xname, reselid, intcode);
|
|
resmsg = osiop_read_1(sc, OSIOP_SFBR);
|
|
if (!MSG_ISIDENTIFY(resmsg))
|
|
printf("%s: Reselect message in was not identify: "
|
|
"%02x\n", sc->sc_dev.dv_xname, resmsg);
|
|
#endif
|
|
if (sc->sc_nexus != NULL) {
|
|
struct scsipi_periph *periph =
|
|
sc->sc_nexus->xs->xs_periph;
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_DISC)
|
|
printf("%s: reselect ID %02x w/active\n",
|
|
sc->sc_dev.dv_xname, reselid);
|
|
#endif
|
|
TAILQ_INSERT_HEAD(&sc->ready_list,
|
|
sc->sc_nexus, chain);
|
|
sc->sc_tinfo[periph->periph_target].lubusy
|
|
&= ~(1 << periph->periph_lun);
|
|
sc->sc_active--;
|
|
}
|
|
/*
|
|
* locate acb of reselecting device
|
|
* set sc->sc_nexus to acb
|
|
*/
|
|
TAILQ_FOREACH(acb, &sc->nexus_list, chain) {
|
|
struct scsipi_periph *periph = acb->xs->xs_periph;
|
|
if (reselid != periph->periph_target ||
|
|
reselun != periph->periph_lun) {
|
|
continue;
|
|
}
|
|
TAILQ_REMOVE(&sc->nexus_list, acb, chain);
|
|
sc->sc_nexus = acb;
|
|
sc->sc_flags |= acb->intstat;
|
|
acb->intstat = 0;
|
|
osiop_write_4(sc, OSIOP_DSA,
|
|
dsdma->dm_segs[0].ds_addr + acb->dsoffset);
|
|
osiop_write_1(sc, OSIOP_SXFER,
|
|
sc->sc_tinfo[reselid].sxfer);
|
|
osiop_write_1(sc, OSIOP_SBCL,
|
|
sc->sc_tinfo[reselid].sbcl);
|
|
break;
|
|
}
|
|
if (acb == NULL) {
|
|
printf("%s: target ID %02x reselect nexus_list %p\n",
|
|
sc->sc_dev.dv_xname, reselid,
|
|
TAILQ_FIRST(&sc->nexus_list));
|
|
panic("unable to find reselecting device");
|
|
}
|
|
|
|
osiop_write_4(sc, OSIOP_TEMP, 0);
|
|
osiop_write_1(sc, OSIOP_DCNTL,
|
|
osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
|
|
return (0);
|
|
}
|
|
if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_connect) {
|
|
#ifdef OSIOP_DEBUG
|
|
u_int8_t ctest2 = osiop_read_1(sc, OSIOP_CTEST2);
|
|
|
|
/* reselect was interrupted (by Sig_P or select) */
|
|
if (osiop_debug & DEBUG_DISC ||
|
|
(ctest2 & OSIOP_CTEST2_SIGP) == 0)
|
|
printf("%s: reselect interrupted (Sig_P?) "
|
|
"scntl1 %x ctest2 %x sfbr %x istat %x/%x\n",
|
|
sc->sc_dev.dv_xname,
|
|
osiop_read_1(sc, OSIOP_SCNTL1), ctest2,
|
|
osiop_read_1(sc, OSIOP_SFBR), istat,
|
|
osiop_read_1(sc, OSIOP_ISTAT));
|
|
#endif
|
|
/* XXX assumes it was not select */
|
|
if (sc->sc_nexus == NULL) {
|
|
#ifdef OSIOP_DEBUG
|
|
printf("%s: reselect interrupted, sc_nexus == NULL\n",
|
|
sc->sc_dev.dv_xname);
|
|
#if 0
|
|
osiop_dump(sc);
|
|
#ifdef DDB
|
|
Debugger();
|
|
#endif
|
|
#endif
|
|
#endif
|
|
osiop_write_1(sc, OSIOP_DCNTL,
|
|
osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
|
|
return (0);
|
|
}
|
|
target = sc->sc_nexus->xs->xs_periph->periph_target;
|
|
osiop_write_4(sc, OSIOP_TEMP, 0);
|
|
osiop_write_4(sc, OSIOP_DSA,
|
|
dsdma->dm_segs[0].ds_addr + sc->sc_nexus->dsoffset);
|
|
osiop_write_1(sc, OSIOP_SXFER, sc->sc_tinfo[target].sxfer);
|
|
osiop_write_1(sc, OSIOP_SBCL, sc->sc_tinfo[target].sbcl);
|
|
osiop_write_4(sc, OSIOP_DSP, scraddr + Ent_scripts);
|
|
return (0);
|
|
}
|
|
if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_msgin) {
|
|
/* Unrecognized message in byte */
|
|
if (acb == NULL)
|
|
printf("%s: Bad message-in with no active command?\n",
|
|
sc->sc_dev.dv_xname);
|
|
printf("%s: Unrecognized message in data "
|
|
"sfbr %x msg %x sbcl %x\n", sc->sc_dev.dv_xname,
|
|
osiop_read_1(sc, OSIOP_SFBR), ds->msgbuf[1],
|
|
osiop_read_1(sc, OSIOP_SBCL));
|
|
/* what should be done here? */
|
|
osiop_write_4(sc, OSIOP_DSP, scraddr + Ent_switch);
|
|
bus_dmamap_sync(sc->sc_dmat, dsdma,
|
|
acb->dsoffset, sizeof(struct osiop_ds),
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
return (0);
|
|
}
|
|
if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_status) {
|
|
/* Status phase wasn't followed by message in phase? */
|
|
printf("%s: Status phase not followed by message in phase? "
|
|
"sbcl %x sbdl %x\n", sc->sc_dev.dv_xname,
|
|
osiop_read_1(sc, OSIOP_SBCL),
|
|
osiop_read_1(sc, OSIOP_SBDL));
|
|
if (osiop_read_1(sc, OSIOP_SBCL) == 0xa7) {
|
|
/* It is now, just continue the script? */
|
|
osiop_write_1(sc, OSIOP_DCNTL,
|
|
osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
|
|
return (0);
|
|
}
|
|
}
|
|
if (dstat & OSIOP_DSTAT_SIR && sstat0 == 0) {
|
|
printf("OSIOP interrupt: %x sts %x msg %x %x sbcl %x\n",
|
|
intcode, ds->stat[0], ds->msgbuf[0], ds->msgbuf[1],
|
|
osiop_read_1(sc, OSIOP_SBCL));
|
|
osiop_reset(sc);
|
|
*status = SCSI_OSIOP_NOSTATUS;
|
|
return (0); /* osiop_reset has cleaned up */
|
|
}
|
|
if (sstat0 & OSIOP_SSTAT0_SGE)
|
|
printf("%s: SCSI Gross Error\n", sc->sc_dev.dv_xname);
|
|
if (sstat0 & OSIOP_SSTAT0_PAR)
|
|
printf("%s: Parity Error\n", sc->sc_dev.dv_xname);
|
|
if (dstat & OSIOP_DSTAT_IID)
|
|
printf("%s: Invalid instruction detected\n",
|
|
sc->sc_dev.dv_xname);
|
|
bad_phase:
|
|
/*
|
|
* temporary panic for unhandled conditions
|
|
* displays various things about the 53C710 status and registers
|
|
* then panics.
|
|
* XXXX need to clean this up to print out the info, reset, and continue
|
|
*/
|
|
printf("osiop_chkintr: target %x ds %p\n", target, ds);
|
|
printf("scripts %lx ds %lx dsp %x dcmd %x\n", scraddr,
|
|
sc->sc_dsdma->dm_segs[0].ds_addr + acb->dsoffset,
|
|
osiop_read_4(sc, OSIOP_DSP),
|
|
osiop_read_4(sc, OSIOP_DBC));
|
|
printf("osiop_chkintr: istat %x dstat %x sstat0 %x "
|
|
"dsps %x dsa %x sbcl %x sts %x msg %x %x sfbr %x\n",
|
|
istat, dstat, sstat0, intcode,
|
|
osiop_read_4(sc, OSIOP_DSA),
|
|
osiop_read_1(sc, OSIOP_SBCL),
|
|
ds->stat[0], ds->msgbuf[0], ds->msgbuf[1],
|
|
osiop_read_1(sc, OSIOP_SFBR));
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_DMA)
|
|
panic("osiop_chkintr: **** temp ****");
|
|
#endif
|
|
#ifdef DDB
|
|
Debugger();
|
|
#endif
|
|
osiop_reset(sc); /* hard reset */
|
|
*status = SCSI_OSIOP_NOSTATUS;
|
|
acb->status = ACB_S_DONE;
|
|
return (0); /* osiop_reset cleaned up */
|
|
}
|
|
|
|
void
|
|
osiop_select(sc)
|
|
struct osiop_softc *sc;
|
|
{
|
|
struct osiop_acb *acb = sc->sc_nexus;
|
|
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_CMD)
|
|
printf("%s: select ", sc->sc_dev.dv_xname);
|
|
#endif
|
|
|
|
if (acb->xs->xs_control & XS_CTL_POLL || sc->sc_flags & OSIOP_NODMA) {
|
|
sc->sc_flags |= OSIOP_INTSOFF;
|
|
sc->sc_flags &= ~OSIOP_INTDEFER;
|
|
if ((osiop_read_1(sc, OSIOP_ISTAT) & OSIOP_ISTAT_CON) == 0) {
|
|
osiop_write_1(sc, OSIOP_SIEN, 0);
|
|
osiop_write_1(sc, OSIOP_DIEN, 0);
|
|
}
|
|
#if 0
|
|
} else if ((sc->sc_flags & OSIOP_INTDEFER) == 0) {
|
|
sc->sc_flags &= ~OSIOP_INTSOFF;
|
|
if ((osiop_read_1(sc, OSIOP_ISTAT) & OSIOP_ISTAT_CON) == 0) {
|
|
osiop_write_1(sc, OSIOP_SIEN, sc->sc_sien);
|
|
osiop_write_1(sc, OSIOP_DIEN, sc->sc_dien);
|
|
}
|
|
#endif
|
|
}
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & DEBUG_CMD)
|
|
printf("osiop_select: target %x cmd %02x ds %p\n",
|
|
acb->xs->xs_periph->periph_target,
|
|
acb->xs->cmd->opcode, sc->sc_nexus->ds);
|
|
#endif
|
|
|
|
osiop_start(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* 53C710 interrupt handler
|
|
*/
|
|
|
|
void
|
|
osiop_intr(sc)
|
|
struct osiop_softc *sc;
|
|
{
|
|
int status, s;
|
|
u_int8_t istat, dstat, sstat0;
|
|
|
|
s = splbio();
|
|
|
|
istat = sc->sc_istat;
|
|
if ((istat & (OSIOP_ISTAT_SIP | OSIOP_ISTAT_DIP)) == 0) {
|
|
splx(s);
|
|
return;
|
|
}
|
|
|
|
/* Got a valid interrupt on this device; set by MD handler */
|
|
dstat = sc->sc_dstat;
|
|
sstat0 = sc->sc_sstat0;
|
|
sc->sc_istat = 0;
|
|
#ifdef OSIOP_DEBUG
|
|
if (!sc->sc_active) {
|
|
/* XXX needs sync */
|
|
printf("%s: spurious interrupt? "
|
|
"istat %x dstat %x sstat0 %x nexus %p status %x\n",
|
|
sc->sc_dev.dv_xname, istat, dstat, sstat0, sc->sc_nexus,
|
|
(sc->sc_nexus != NULL) ? sc->sc_nexus->ds->stat[0] : 0);
|
|
}
|
|
#endif
|
|
|
|
#ifdef OSIOP_DEBUG
|
|
if (osiop_debug & (DEBUG_INT|DEBUG_CMD)) {
|
|
/* XXX needs sync */
|
|
printf("%s: intr istat %x dstat %x sstat0 %x dsps %x "
|
|
"sbcl %x dsp %x dcmd %x sts %x msg %x\n",
|
|
sc->sc_dev.dv_xname,
|
|
istat, dstat, sstat0,
|
|
osiop_read_4(sc, OSIOP_DSPS),
|
|
osiop_read_1(sc, OSIOP_SBCL),
|
|
osiop_read_4(sc, OSIOP_DSP),
|
|
osiop_read_4(sc, OSIOP_DBC),
|
|
(sc->sc_nexus != NULL) ? sc->sc_nexus->ds->stat[0] : 0,
|
|
(sc->sc_nexus != NULL) ? sc->sc_nexus->ds->msgbuf[0] : 0);
|
|
}
|
|
#endif
|
|
if (sc->sc_flags & OSIOP_INTDEFER) {
|
|
sc->sc_flags &= ~(OSIOP_INTDEFER | OSIOP_INTSOFF);
|
|
osiop_write_1(sc, OSIOP_SIEN, sc->sc_sien);
|
|
osiop_write_1(sc, OSIOP_DIEN, sc->sc_dien);
|
|
}
|
|
if (osiop_checkintr(sc, istat, dstat, sstat0, &status)) {
|
|
#if 0
|
|
if (status == SCSI_OSIOP_NOSTATUS)
|
|
printf("osiop_intr: no valid status \n");
|
|
#endif
|
|
if ((sc->sc_flags & (OSIOP_INTSOFF | OSIOP_INTDEFER)) !=
|
|
OSIOP_INTSOFF) {
|
|
#if 0
|
|
if (osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
|
|
struct scsipi_periph *periph;
|
|
|
|
periph = sc->sc_nexus->xs->xs_periph;
|
|
printf("%s: SCSI bus busy at completion"
|
|
" targ %d sbcl %02x sfbr %x lcrc "
|
|
"%02x dsp +%x\n", sc->sc_dev.dv_xname,
|
|
periph->periphtarget,
|
|
osiop_read_1(sc, OSIOP_SBCL),
|
|
osiop_read_1(sc, OSIOP_SFBR),
|
|
osiop_read_1(sc, OSIOP_LCRC),
|
|
osiop_read_4(sc, OSIOP_DSP) -
|
|
sc->sc_scrdma->dm_segs[0].ds_addr);
|
|
}
|
|
#endif
|
|
osiop_scsidone(sc->sc_nexus, status);
|
|
}
|
|
}
|
|
splx(s);
|
|
}
|
|
|
|
void
|
|
osiop_update_xfer_mode(sc, target)
|
|
struct osiop_softc *sc;
|
|
int target;
|
|
{
|
|
struct osiop_tinfo *tinfo = &sc->sc_tinfo[target];
|
|
struct scsipi_xfer_mode xm;
|
|
|
|
xm.xm_target = target;
|
|
xm.xm_mode = 0;
|
|
xm.xm_period = 0;
|
|
xm.xm_offset = 0;
|
|
|
|
if (tinfo->period) {
|
|
xm.xm_mode |= PERIPH_CAP_SYNC;
|
|
xm.xm_period = tinfo->period;
|
|
xm.xm_offset = tinfo->offset;
|
|
}
|
|
|
|
scsipi_async_event(&sc->sc_channel, ASYNC_EVENT_XFER_MODE, &xm);
|
|
}
|
|
|
|
void
|
|
scsi_period_to_osiop(sc, target)
|
|
struct osiop_softc *sc;
|
|
int target;
|
|
{
|
|
int period, offset, sxfer, sbcl;
|
|
|
|
period = sc->sc_tinfo[target].period;
|
|
offset = sc->sc_tinfo[target].offset;
|
|
for (sbcl = 1; sbcl < 4; sbcl++) {
|
|
sxfer = (period * 4 - 1) / sc->sc_tcp[sbcl] - 3;
|
|
if (sxfer >= 0 && sxfer <= 7)
|
|
break;
|
|
}
|
|
if (sbcl > 3) {
|
|
printf("osiop sync: unable to compute sync params "
|
|
"for period %d ns\n", period * 4);
|
|
/*
|
|
* XXX need to pick a value we can do and renegotiate
|
|
*/
|
|
sxfer = sbcl = 0;
|
|
} else {
|
|
sxfer = (sxfer << 4) | ((offset <= OSIOP_MAX_OFFSET) ?
|
|
offset : OSIOP_MAX_OFFSET);
|
|
#ifdef DEBUG_SYNC
|
|
printf("osiop sync: params for period %dns: sxfer %x sbcl %x",
|
|
period * 4, sxfer, sbcl);
|
|
printf(" actual period %dns\n",
|
|
sc->sc_tcp[sbcl] * ((sxfer >> 4) + 4));
|
|
#endif
|
|
}
|
|
sc->sc_tinfo[target].sxfer = sxfer;
|
|
sc->sc_tinfo[target].sbcl = sbcl;
|
|
#ifdef DEBUG_SYNC
|
|
printf("osiop sync: osiop_sxfr %02x, osiop_sbcl %02x\n", sxfer, sbcl);
|
|
#endif
|
|
}
|
|
|
|
void
|
|
osiop_timeout(arg)
|
|
void *arg;
|
|
{
|
|
struct osiop_acb *acb = arg;
|
|
struct scsipi_xfer *xs = acb->xs;
|
|
struct osiop_softc *sc = acb->sc;
|
|
int s;
|
|
|
|
scsipi_printaddr(xs->xs_periph);
|
|
printf("command timeout\n");
|
|
|
|
s = splbio();
|
|
/* reset the scsi bus */
|
|
osiop_resetbus(sc);
|
|
|
|
/* deactivate callout */
|
|
callout_stop(&xs->xs_callout);
|
|
acb->flags |= ACB_F_TIMEOUT;
|
|
osiop_reset(sc);
|
|
splx(s);
|
|
return;
|
|
}
|
|
|
|
#ifdef OSIOP_DEBUG
|
|
|
|
#if OSIOP_TRACE_SIZE
|
|
void
|
|
osiop_dump_trace()
|
|
{
|
|
int i;
|
|
|
|
printf("osiop trace: next index %d\n", osiop_trix);
|
|
i = osiop_trix;
|
|
do {
|
|
printf("%3d: '%c' %02x %02x %02x\n", i,
|
|
osiop_trbuf[i], osiop_trbuf[i + 1],
|
|
osiop_trbuf[i + 2], osiop_trbuf[i + 3]);
|
|
i = (i + 4) & (OSIOP_TRACE_SIZE - 1);
|
|
} while (i != osiop_trix);
|
|
}
|
|
#endif
|
|
|
|
void
|
|
osiop_dump_acb(acb)
|
|
struct osiop_acb *acb;
|
|
{
|
|
u_int8_t *b;
|
|
int i;
|
|
|
|
printf("acb@%p ", acb);
|
|
if (acb->xs == NULL) {
|
|
printf("<unused>\n");
|
|
return;
|
|
}
|
|
|
|
b = (u_int8_t *)&acb->xs->cmd;
|
|
printf("(%d:%d) status %2x cmdlen %2ld cmd ",
|
|
acb->xs->xs_periph->periph_target,
|
|
acb->xs->xs_periph->periph_lun, acb->status, acb->cmdlen);
|
|
for (i = acb->cmdlen; i > 0; i--)
|
|
printf(" %02x", *b++);
|
|
printf("\n");
|
|
printf(" xs: %p data %p:%04x ", acb->xs, acb->xs->data,
|
|
acb->xs->datalen);
|
|
printf("va %p:%lx ", acb->data, acb->datalen);
|
|
printf("cur %lx:%lx\n", acb->curaddr, acb->curlen);
|
|
}
|
|
|
|
void
|
|
osiop_dump(sc)
|
|
struct osiop_softc *sc;
|
|
{
|
|
struct osiop_acb *acb;
|
|
int i, s;
|
|
|
|
s = splbio();
|
|
#if OSIOP_TRACE_SIZE
|
|
osiop_dump_trace();
|
|
#endif
|
|
printf("%s@%p istat %02x\n",
|
|
sc->sc_dev.dv_xname, sc, osiop_read_1(sc, OSIOP_ISTAT));
|
|
if ((acb = TAILQ_FIRST(&sc->free_list)) != NULL) {
|
|
printf("Free list:\n");
|
|
while (acb) {
|
|
osiop_dump_acb(acb);
|
|
acb = TAILQ_NEXT(acb, chain);
|
|
}
|
|
}
|
|
if ((acb = TAILQ_FIRST(&sc->ready_list)) != NULL) {
|
|
printf("Ready list:\n");
|
|
while (acb) {
|
|
osiop_dump_acb(acb);
|
|
acb = TAILQ_NEXT(acb, chain);
|
|
}
|
|
}
|
|
if ((acb = TAILQ_FIRST(&sc->nexus_list)) != NULL) {
|
|
printf("Nexus list:\n");
|
|
while (acb) {
|
|
osiop_dump_acb(acb);
|
|
acb = TAILQ_NEXT(acb, chain);
|
|
}
|
|
}
|
|
if (sc->sc_nexus) {
|
|
printf("Nexus:\n");
|
|
osiop_dump_acb(sc->sc_nexus);
|
|
}
|
|
for (i = 0; i < OSIOP_NTGT; i++) {
|
|
if (sc->sc_tinfo[i].cmds > 2) {
|
|
printf("tgt %d: cmds %d disc %d lubusy %x\n",
|
|
i, sc->sc_tinfo[i].cmds,
|
|
sc->sc_tinfo[i].dconns,
|
|
sc->sc_tinfo[i].lubusy);
|
|
}
|
|
}
|
|
splx(s);
|
|
}
|
|
#endif
|