2015 lines
51 KiB
C
2015 lines
51 KiB
C
/* $NetBSD: gem.c,v 1.27 2003/05/03 18:11:17 wiz Exp $ */
|
|
|
|
/*
|
|
*
|
|
* Copyright (C) 2001 Eduardo Horvath.
|
|
* All rights reserved.
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Driver for Sun GEM ethernet controllers.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: gem.c,v 1.27 2003/05/03 18:11:17 wiz Exp $");
|
|
|
|
#include "bpfilter.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/device.h>
|
|
|
|
#include <machine/endian.h>
|
|
|
|
#include <uvm/uvm_extern.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_ether.h>
|
|
|
|
#if NBPFILTER > 0
|
|
#include <net/bpf.h>
|
|
#endif
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/intr.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
#include <dev/mii/mii_bitbang.h>
|
|
|
|
#include <dev/ic/gemreg.h>
|
|
#include <dev/ic/gemvar.h>
|
|
|
|
#define TRIES 10000
|
|
|
|
void gem_start __P((struct ifnet *));
|
|
void gem_stop __P((struct ifnet *, int));
|
|
int gem_ioctl __P((struct ifnet *, u_long, caddr_t));
|
|
void gem_tick __P((void *));
|
|
void gem_watchdog __P((struct ifnet *));
|
|
void gem_shutdown __P((void *));
|
|
int gem_init __P((struct ifnet *));
|
|
void gem_init_regs(struct gem_softc *sc);
|
|
static int gem_ringsize(int sz);
|
|
int gem_meminit __P((struct gem_softc *));
|
|
void gem_mifinit __P((struct gem_softc *));
|
|
void gem_reset __P((struct gem_softc *));
|
|
int gem_reset_rx(struct gem_softc *sc);
|
|
int gem_reset_tx(struct gem_softc *sc);
|
|
int gem_disable_rx(struct gem_softc *sc);
|
|
int gem_disable_tx(struct gem_softc *sc);
|
|
void gem_rxdrain(struct gem_softc *sc);
|
|
int gem_add_rxbuf(struct gem_softc *sc, int idx);
|
|
void gem_setladrf __P((struct gem_softc *));
|
|
|
|
/* MII methods & callbacks */
|
|
static int gem_mii_readreg __P((struct device *, int, int));
|
|
static void gem_mii_writereg __P((struct device *, int, int, int));
|
|
static void gem_mii_statchg __P((struct device *));
|
|
|
|
int gem_mediachange __P((struct ifnet *));
|
|
void gem_mediastatus __P((struct ifnet *, struct ifmediareq *));
|
|
|
|
struct mbuf *gem_get __P((struct gem_softc *, int, int));
|
|
int gem_put __P((struct gem_softc *, int, struct mbuf *));
|
|
void gem_read __P((struct gem_softc *, int, int));
|
|
int gem_eint __P((struct gem_softc *, u_int));
|
|
int gem_rint __P((struct gem_softc *));
|
|
int gem_tint __P((struct gem_softc *));
|
|
void gem_power __P((int, void *));
|
|
|
|
#ifdef GEM_DEBUG
|
|
#define DPRINTF(sc, x) if ((sc)->sc_ethercom.ec_if.if_flags & IFF_DEBUG) \
|
|
printf x
|
|
#else
|
|
#define DPRINTF(sc, x) /* nothing */
|
|
#endif
|
|
|
|
|
|
/*
|
|
* gem_attach:
|
|
*
|
|
* Attach a Gem interface to the system.
|
|
*/
|
|
void
|
|
gem_attach(sc, enaddr)
|
|
struct gem_softc *sc;
|
|
const uint8_t *enaddr;
|
|
{
|
|
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
|
|
struct mii_data *mii = &sc->sc_mii;
|
|
struct mii_softc *child;
|
|
struct ifmedia_entry *ifm;
|
|
int i, error;
|
|
u_int32_t v;
|
|
|
|
/* Make sure the chip is stopped. */
|
|
ifp->if_softc = sc;
|
|
gem_reset(sc);
|
|
|
|
/*
|
|
* Allocate the control data structures, and create and load the
|
|
* DMA map for it.
|
|
*/
|
|
if ((error = bus_dmamem_alloc(sc->sc_dmatag,
|
|
sizeof(struct gem_control_data), PAGE_SIZE, 0, &sc->sc_cdseg,
|
|
1, &sc->sc_cdnseg, 0)) != 0) {
|
|
aprint_error(
|
|
"%s: unable to allocate control data, error = %d\n",
|
|
sc->sc_dev.dv_xname, error);
|
|
goto fail_0;
|
|
}
|
|
|
|
/* XXX should map this in with correct endianness */
|
|
if ((error = bus_dmamem_map(sc->sc_dmatag, &sc->sc_cdseg, sc->sc_cdnseg,
|
|
sizeof(struct gem_control_data), (caddr_t *)&sc->sc_control_data,
|
|
BUS_DMA_COHERENT)) != 0) {
|
|
aprint_error("%s: unable to map control data, error = %d\n",
|
|
sc->sc_dev.dv_xname, error);
|
|
goto fail_1;
|
|
}
|
|
|
|
if ((error = bus_dmamap_create(sc->sc_dmatag,
|
|
sizeof(struct gem_control_data), 1,
|
|
sizeof(struct gem_control_data), 0, 0, &sc->sc_cddmamap)) != 0) {
|
|
aprint_error("%s: unable to create control data DMA map, "
|
|
"error = %d\n", sc->sc_dev.dv_xname, error);
|
|
goto fail_2;
|
|
}
|
|
|
|
if ((error = bus_dmamap_load(sc->sc_dmatag, sc->sc_cddmamap,
|
|
sc->sc_control_data, sizeof(struct gem_control_data), NULL,
|
|
0)) != 0) {
|
|
aprint_error(
|
|
"%s: unable to load control data DMA map, error = %d\n",
|
|
sc->sc_dev.dv_xname, error);
|
|
goto fail_3;
|
|
}
|
|
|
|
/*
|
|
* Initialize the transmit job descriptors.
|
|
*/
|
|
SIMPLEQ_INIT(&sc->sc_txfreeq);
|
|
SIMPLEQ_INIT(&sc->sc_txdirtyq);
|
|
|
|
/*
|
|
* Create the transmit buffer DMA maps.
|
|
*/
|
|
for (i = 0; i < GEM_TXQUEUELEN; i++) {
|
|
struct gem_txsoft *txs;
|
|
|
|
txs = &sc->sc_txsoft[i];
|
|
txs->txs_mbuf = NULL;
|
|
if ((error = bus_dmamap_create(sc->sc_dmatag,
|
|
ETHER_MAX_LEN_JUMBO, GEM_NTXSEGS,
|
|
ETHER_MAX_LEN_JUMBO, 0, 0,
|
|
&txs->txs_dmamap)) != 0) {
|
|
aprint_error("%s: unable to create tx DMA map %d, "
|
|
"error = %d\n", sc->sc_dev.dv_xname, i, error);
|
|
goto fail_4;
|
|
}
|
|
SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
}
|
|
|
|
/*
|
|
* Create the receive buffer DMA maps.
|
|
*/
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
if ((error = bus_dmamap_create(sc->sc_dmatag, MCLBYTES, 1,
|
|
MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) {
|
|
aprint_error("%s: unable to create rx DMA map %d, "
|
|
"error = %d\n", sc->sc_dev.dv_xname, i, error);
|
|
goto fail_5;
|
|
}
|
|
sc->sc_rxsoft[i].rxs_mbuf = NULL;
|
|
}
|
|
|
|
/*
|
|
* From this point forward, the attachment cannot fail. A failure
|
|
* before this point releases all resources that may have been
|
|
* allocated.
|
|
*/
|
|
|
|
/* Announce ourselves. */
|
|
aprint_normal("%s: Ethernet address %s", sc->sc_dev.dv_xname,
|
|
ether_sprintf(enaddr));
|
|
|
|
/* Get RX FIFO size */
|
|
sc->sc_rxfifosize = 64 *
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_RX_FIFO_SIZE);
|
|
aprint_normal(", %uKB RX fifo", sc->sc_rxfifosize / 1024);
|
|
|
|
/* Get TX FIFO size */
|
|
v = bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_TX_FIFO_SIZE);
|
|
aprint_normal(", %uKB TX fifo\n", v / 16);
|
|
|
|
/* Initialize ifnet structure. */
|
|
strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
|
|
ifp->if_softc = sc;
|
|
ifp->if_flags =
|
|
IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | IFF_MULTICAST;
|
|
ifp->if_start = gem_start;
|
|
ifp->if_ioctl = gem_ioctl;
|
|
ifp->if_watchdog = gem_watchdog;
|
|
ifp->if_stop = gem_stop;
|
|
ifp->if_init = gem_init;
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
/* Initialize ifmedia structures and MII info */
|
|
mii->mii_ifp = ifp;
|
|
mii->mii_readreg = gem_mii_readreg;
|
|
mii->mii_writereg = gem_mii_writereg;
|
|
mii->mii_statchg = gem_mii_statchg;
|
|
|
|
ifmedia_init(&mii->mii_media, IFM_IMASK, gem_mediachange, gem_mediastatus);
|
|
|
|
gem_mifinit(sc);
|
|
|
|
mii_attach(&sc->sc_dev, mii, 0xffffffff,
|
|
MII_PHY_ANY, MII_OFFSET_ANY, MIIF_FORCEANEG);
|
|
|
|
child = LIST_FIRST(&mii->mii_phys);
|
|
if (child == NULL) {
|
|
/* No PHY attached */
|
|
ifmedia_add(&sc->sc_media, IFM_ETHER|IFM_MANUAL, 0, NULL);
|
|
ifmedia_set(&sc->sc_media, IFM_ETHER|IFM_MANUAL);
|
|
} else {
|
|
/*
|
|
* Walk along the list of attached MII devices and
|
|
* establish an `MII instance' to `phy number'
|
|
* mapping. We'll use this mapping in media change
|
|
* requests to determine which phy to use to program
|
|
* the MIF configuration register.
|
|
*/
|
|
for (; child != NULL; child = LIST_NEXT(child, mii_list)) {
|
|
/*
|
|
* Note: we support just two PHYs: the built-in
|
|
* internal device and an external on the MII
|
|
* connector.
|
|
*/
|
|
if (child->mii_phy > 1 || child->mii_inst > 1) {
|
|
aprint_error(
|
|
"%s: cannot accomodate MII device %s"
|
|
" at phy %d, instance %d\n",
|
|
sc->sc_dev.dv_xname,
|
|
child->mii_dev.dv_xname,
|
|
child->mii_phy, child->mii_inst);
|
|
continue;
|
|
}
|
|
|
|
sc->sc_phys[child->mii_inst] = child->mii_phy;
|
|
|
|
}
|
|
|
|
/*
|
|
* Now select and activate the PHY we will use.
|
|
*
|
|
* The order of preference is External (MDI1),
|
|
* Internal (MDI0), Serial Link (no MII).
|
|
*/
|
|
if (sc->sc_phys[1]) {
|
|
#ifdef DEBUG
|
|
aprint_debug("using external phy\n");
|
|
#endif
|
|
sc->sc_mif_config |= GEM_MIF_CONFIG_PHY_SEL;
|
|
} else {
|
|
#ifdef DEBUG
|
|
aprint_debug("using internal phy\n");
|
|
#endif
|
|
sc->sc_mif_config &= ~GEM_MIF_CONFIG_PHY_SEL;
|
|
}
|
|
bus_space_write_4(sc->sc_bustag, sc->sc_h, GEM_MIF_CONFIG,
|
|
sc->sc_mif_config);
|
|
|
|
/*
|
|
* XXX - we can really do the following ONLY if the
|
|
* phy indeed has the auto negotiation capability!!
|
|
*/
|
|
ifmedia_set(&sc->sc_media, IFM_ETHER|IFM_AUTO);
|
|
}
|
|
|
|
/*
|
|
* If we support GigE media, we support jumbo frames too.
|
|
* Unless we are Apple.
|
|
*/
|
|
TAILQ_FOREACH(ifm, &sc->sc_media.ifm_list, ifm_list) {
|
|
if (IFM_SUBTYPE(ifm->ifm_media) == IFM_1000_T ||
|
|
IFM_SUBTYPE(ifm->ifm_media) == IFM_1000_SX ||
|
|
IFM_SUBTYPE(ifm->ifm_media) == IFM_1000_LX ||
|
|
IFM_SUBTYPE(ifm->ifm_media) == IFM_1000_CX) {
|
|
if (sc->sc_variant != GEM_APPLE_GMAC)
|
|
sc->sc_ethercom.ec_capabilities
|
|
|= ETHERCAP_JUMBO_MTU;
|
|
|
|
sc->sc_flags |= GEM_GIGABIT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* claim 802.1q capability */
|
|
sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU;
|
|
|
|
/* Attach the interface. */
|
|
if_attach(ifp);
|
|
ether_ifattach(ifp, enaddr);
|
|
|
|
sc->sc_sh = shutdownhook_establish(gem_shutdown, sc);
|
|
if (sc->sc_sh == NULL)
|
|
panic("gem_config: can't establish shutdownhook");
|
|
|
|
#if NRND > 0
|
|
rnd_attach_source(&sc->rnd_source, sc->sc_dev.dv_xname,
|
|
RND_TYPE_NET, 0);
|
|
#endif
|
|
|
|
evcnt_attach_dynamic(&sc->sc_ev_intr, EVCNT_TYPE_INTR,
|
|
NULL, sc->sc_dev.dv_xname, "interrupts");
|
|
#ifdef GEM_COUNTERS
|
|
evcnt_attach_dynamic(&sc->sc_ev_txint, EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_intr, sc->sc_dev.dv_xname, "tx interrupts");
|
|
evcnt_attach_dynamic(&sc->sc_ev_rxint, EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_intr, sc->sc_dev.dv_xname, "rx interrupts");
|
|
evcnt_attach_dynamic(&sc->sc_ev_rxfull, EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_rxint, sc->sc_dev.dv_xname, "rx ring full");
|
|
evcnt_attach_dynamic(&sc->sc_ev_rxnobuf, EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_rxint, sc->sc_dev.dv_xname, "rx malloc failure");
|
|
evcnt_attach_dynamic(&sc->sc_ev_rxhist[0], EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_rxint, sc->sc_dev.dv_xname, "rx 0desc");
|
|
evcnt_attach_dynamic(&sc->sc_ev_rxhist[1], EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_rxint, sc->sc_dev.dv_xname, "rx 1desc");
|
|
evcnt_attach_dynamic(&sc->sc_ev_rxhist[2], EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_rxint, sc->sc_dev.dv_xname, "rx 2desc");
|
|
evcnt_attach_dynamic(&sc->sc_ev_rxhist[3], EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_rxint, sc->sc_dev.dv_xname, "rx 3desc");
|
|
evcnt_attach_dynamic(&sc->sc_ev_rxhist[4], EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_rxint, sc->sc_dev.dv_xname, "rx >3desc");
|
|
evcnt_attach_dynamic(&sc->sc_ev_rxhist[5], EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_rxint, sc->sc_dev.dv_xname, "rx >7desc");
|
|
evcnt_attach_dynamic(&sc->sc_ev_rxhist[6], EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_rxint, sc->sc_dev.dv_xname, "rx >15desc");
|
|
evcnt_attach_dynamic(&sc->sc_ev_rxhist[7], EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_rxint, sc->sc_dev.dv_xname, "rx >31desc");
|
|
evcnt_attach_dynamic(&sc->sc_ev_rxhist[8], EVCNT_TYPE_INTR,
|
|
&sc->sc_ev_rxint, sc->sc_dev.dv_xname, "rx >63desc");
|
|
#endif
|
|
|
|
#if notyet
|
|
/*
|
|
* Add a suspend hook to make sure we come back up after a
|
|
* resume.
|
|
*/
|
|
sc->sc_powerhook = powerhook_establish(gem_power, sc);
|
|
if (sc->sc_powerhook == NULL)
|
|
aprint_error("%s: WARNING: unable to establish power hook\n",
|
|
sc->sc_dev.dv_xname);
|
|
#endif
|
|
|
|
callout_init(&sc->sc_tick_ch);
|
|
return;
|
|
|
|
/*
|
|
* Free any resources we've allocated during the failed attach
|
|
* attempt. Do this in reverse order and fall through.
|
|
*/
|
|
fail_5:
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
if (sc->sc_rxsoft[i].rxs_dmamap != NULL)
|
|
bus_dmamap_destroy(sc->sc_dmatag,
|
|
sc->sc_rxsoft[i].rxs_dmamap);
|
|
}
|
|
fail_4:
|
|
for (i = 0; i < GEM_TXQUEUELEN; i++) {
|
|
if (sc->sc_txsoft[i].txs_dmamap != NULL)
|
|
bus_dmamap_destroy(sc->sc_dmatag,
|
|
sc->sc_txsoft[i].txs_dmamap);
|
|
}
|
|
bus_dmamap_unload(sc->sc_dmatag, sc->sc_cddmamap);
|
|
fail_3:
|
|
bus_dmamap_destroy(sc->sc_dmatag, sc->sc_cddmamap);
|
|
fail_2:
|
|
bus_dmamem_unmap(sc->sc_dmatag, (caddr_t)sc->sc_control_data,
|
|
sizeof(struct gem_control_data));
|
|
fail_1:
|
|
bus_dmamem_free(sc->sc_dmatag, &sc->sc_cdseg, sc->sc_cdnseg);
|
|
fail_0:
|
|
return;
|
|
}
|
|
|
|
|
|
void
|
|
gem_tick(arg)
|
|
void *arg;
|
|
{
|
|
struct gem_softc *sc = arg;
|
|
int s;
|
|
|
|
s = splnet();
|
|
mii_tick(&sc->sc_mii);
|
|
splx(s);
|
|
|
|
callout_reset(&sc->sc_tick_ch, hz, gem_tick, sc);
|
|
|
|
}
|
|
|
|
void
|
|
gem_reset(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
int i;
|
|
int s;
|
|
|
|
s = splnet();
|
|
DPRINTF(sc, ("%s: gem_reset\n", sc->sc_dev.dv_xname));
|
|
gem_reset_rx(sc);
|
|
gem_reset_tx(sc);
|
|
|
|
/* Do a full reset */
|
|
bus_space_write_4(t, h, GEM_RESET, GEM_RESET_RX|GEM_RESET_TX);
|
|
for (i=TRIES; i--; delay(100))
|
|
if ((bus_space_read_4(t, h, GEM_RESET) &
|
|
(GEM_RESET_RX|GEM_RESET_TX)) == 0)
|
|
break;
|
|
if ((bus_space_read_4(t, h, GEM_RESET) &
|
|
(GEM_RESET_RX|GEM_RESET_TX)) != 0) {
|
|
printf("%s: cannot reset device\n",
|
|
sc->sc_dev.dv_xname);
|
|
}
|
|
splx(s);
|
|
}
|
|
|
|
|
|
/*
|
|
* gem_rxdrain:
|
|
*
|
|
* Drain the receive queue.
|
|
*/
|
|
void
|
|
gem_rxdrain(struct gem_softc *sc)
|
|
{
|
|
struct gem_rxsoft *rxs;
|
|
int i;
|
|
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
rxs = &sc->sc_rxsoft[i];
|
|
if (rxs->rxs_mbuf != NULL) {
|
|
bus_dmamap_unload(sc->sc_dmatag, rxs->rxs_dmamap);
|
|
m_freem(rxs->rxs_mbuf);
|
|
rxs->rxs_mbuf = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset the whole thing.
|
|
*/
|
|
void
|
|
gem_stop(struct ifnet *ifp, int disable)
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)ifp->if_softc;
|
|
struct gem_txsoft *txs;
|
|
|
|
DPRINTF(sc, ("%s: gem_stop\n", sc->sc_dev.dv_xname));
|
|
|
|
callout_stop(&sc->sc_tick_ch);
|
|
mii_down(&sc->sc_mii);
|
|
|
|
/* XXX - Should we reset these instead? */
|
|
gem_disable_rx(sc);
|
|
gem_disable_tx(sc);
|
|
|
|
/*
|
|
* Release any queued transmit buffers.
|
|
*/
|
|
while ((txs = SIMPLEQ_FIRST(&sc->sc_txdirtyq)) != NULL) {
|
|
SIMPLEQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q);
|
|
if (txs->txs_mbuf != NULL) {
|
|
bus_dmamap_unload(sc->sc_dmatag, txs->txs_dmamap);
|
|
m_freem(txs->txs_mbuf);
|
|
txs->txs_mbuf = NULL;
|
|
}
|
|
SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
}
|
|
|
|
if (disable) {
|
|
gem_rxdrain(sc);
|
|
}
|
|
|
|
/*
|
|
* Mark the interface down and cancel the watchdog timer.
|
|
*/
|
|
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
ifp->if_timer = 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Reset the receiver
|
|
*/
|
|
int
|
|
gem_reset_rx(struct gem_softc *sc)
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
int i;
|
|
|
|
|
|
/*
|
|
* Resetting while DMA is in progress can cause a bus hang, so we
|
|
* disable DMA first.
|
|
*/
|
|
gem_disable_rx(sc);
|
|
bus_space_write_4(t, h, GEM_RX_CONFIG, 0);
|
|
/* Wait till it finishes */
|
|
for (i=TRIES; i--; delay(100))
|
|
if ((bus_space_read_4(t, h, GEM_RX_CONFIG) & 1) == 0)
|
|
break;
|
|
if ((bus_space_read_4(t, h, GEM_RX_CONFIG) & 1) != 0)
|
|
printf("%s: cannot disable read DMA\n",
|
|
sc->sc_dev.dv_xname);
|
|
|
|
/* Wait 5ms extra. */
|
|
delay(5000);
|
|
|
|
/* Finally, reset the ERX */
|
|
bus_space_write_4(t, h, GEM_RESET, GEM_RESET_RX);
|
|
/* Wait till it finishes */
|
|
for (i=TRIES; i--; delay(100))
|
|
if ((bus_space_read_4(t, h, GEM_RESET) & GEM_RESET_RX) == 0)
|
|
break;
|
|
if ((bus_space_read_4(t, h, GEM_RESET) & GEM_RESET_RX) != 0) {
|
|
printf("%s: cannot reset receiver\n",
|
|
sc->sc_dev.dv_xname);
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Reset the transmitter
|
|
*/
|
|
int
|
|
gem_reset_tx(struct gem_softc *sc)
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
int i;
|
|
|
|
/*
|
|
* Resetting while DMA is in progress can cause a bus hang, so we
|
|
* disable DMA first.
|
|
*/
|
|
gem_disable_tx(sc);
|
|
bus_space_write_4(t, h, GEM_TX_CONFIG, 0);
|
|
/* Wait till it finishes */
|
|
for (i=TRIES; i--; delay(100))
|
|
if ((bus_space_read_4(t, h, GEM_TX_CONFIG) & 1) == 0)
|
|
break;
|
|
if ((bus_space_read_4(t, h, GEM_TX_CONFIG) & 1) != 0)
|
|
printf("%s: cannot disable read DMA\n",
|
|
sc->sc_dev.dv_xname);
|
|
|
|
/* Wait 5ms extra. */
|
|
delay(5000);
|
|
|
|
/* Finally, reset the ETX */
|
|
bus_space_write_4(t, h, GEM_RESET, GEM_RESET_TX);
|
|
/* Wait till it finishes */
|
|
for (i=TRIES; i--; delay(100))
|
|
if ((bus_space_read_4(t, h, GEM_RESET) & GEM_RESET_TX) == 0)
|
|
break;
|
|
if ((bus_space_read_4(t, h, GEM_RESET) & GEM_RESET_TX) != 0) {
|
|
printf("%s: cannot reset receiver\n",
|
|
sc->sc_dev.dv_xname);
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* disable receiver.
|
|
*/
|
|
int
|
|
gem_disable_rx(struct gem_softc *sc)
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
int i;
|
|
u_int32_t cfg;
|
|
|
|
/* Flip the enable bit */
|
|
cfg = bus_space_read_4(t, h, GEM_MAC_RX_CONFIG);
|
|
cfg &= ~GEM_MAC_RX_ENABLE;
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CONFIG, cfg);
|
|
|
|
/* Wait for it to finish */
|
|
for (i=TRIES; i--; delay(100))
|
|
if ((bus_space_read_4(t, h, GEM_MAC_RX_CONFIG) &
|
|
GEM_MAC_RX_ENABLE) == 0)
|
|
return (0);
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* disable transmitter.
|
|
*/
|
|
int
|
|
gem_disable_tx(struct gem_softc *sc)
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
int i;
|
|
u_int32_t cfg;
|
|
|
|
/* Flip the enable bit */
|
|
cfg = bus_space_read_4(t, h, GEM_MAC_TX_CONFIG);
|
|
cfg &= ~GEM_MAC_TX_ENABLE;
|
|
bus_space_write_4(t, h, GEM_MAC_TX_CONFIG, cfg);
|
|
|
|
/* Wait for it to finish */
|
|
for (i=TRIES; i--; delay(100))
|
|
if ((bus_space_read_4(t, h, GEM_MAC_TX_CONFIG) &
|
|
GEM_MAC_TX_ENABLE) == 0)
|
|
return (0);
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Initialize interface.
|
|
*/
|
|
int
|
|
gem_meminit(struct gem_softc *sc)
|
|
{
|
|
struct gem_rxsoft *rxs;
|
|
int i, error;
|
|
|
|
/*
|
|
* Initialize the transmit descriptor ring.
|
|
*/
|
|
memset((void *)sc->sc_txdescs, 0, sizeof(sc->sc_txdescs));
|
|
for (i = 0; i < GEM_NTXDESC; i++) {
|
|
sc->sc_txdescs[i].gd_flags = 0;
|
|
sc->sc_txdescs[i].gd_addr = 0;
|
|
}
|
|
GEM_CDTXSYNC(sc, 0, GEM_NTXDESC,
|
|
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
|
|
sc->sc_txfree = GEM_NTXDESC-1;
|
|
sc->sc_txnext = 0;
|
|
sc->sc_txwin = 0;
|
|
|
|
/*
|
|
* Initialize the receive descriptor and receive job
|
|
* descriptor rings.
|
|
*/
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
rxs = &sc->sc_rxsoft[i];
|
|
if (rxs->rxs_mbuf == NULL) {
|
|
if ((error = gem_add_rxbuf(sc, i)) != 0) {
|
|
printf("%s: unable to allocate or map rx "
|
|
"buffer %d, error = %d\n",
|
|
sc->sc_dev.dv_xname, i, error);
|
|
/*
|
|
* XXX Should attempt to run with fewer receive
|
|
* XXX buffers instead of just failing.
|
|
*/
|
|
gem_rxdrain(sc);
|
|
return (1);
|
|
}
|
|
} else
|
|
GEM_INIT_RXDESC(sc, i);
|
|
}
|
|
sc->sc_rxptr = 0;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
gem_ringsize(int sz)
|
|
{
|
|
int v;
|
|
|
|
switch (sz) {
|
|
case 32:
|
|
v = GEM_RING_SZ_32;
|
|
break;
|
|
case 64:
|
|
v = GEM_RING_SZ_64;
|
|
break;
|
|
case 128:
|
|
v = GEM_RING_SZ_128;
|
|
break;
|
|
case 256:
|
|
v = GEM_RING_SZ_256;
|
|
break;
|
|
case 512:
|
|
v = GEM_RING_SZ_512;
|
|
break;
|
|
case 1024:
|
|
v = GEM_RING_SZ_1024;
|
|
break;
|
|
case 2048:
|
|
v = GEM_RING_SZ_2048;
|
|
break;
|
|
case 4096:
|
|
v = GEM_RING_SZ_4096;
|
|
break;
|
|
case 8192:
|
|
v = GEM_RING_SZ_8192;
|
|
break;
|
|
default:
|
|
printf("gem: invalid Receive Descriptor ring size\n");
|
|
break;
|
|
}
|
|
return (v);
|
|
}
|
|
|
|
/*
|
|
* Initialization of interface; set up initialization block
|
|
* and transmit/receive descriptor rings.
|
|
*/
|
|
int
|
|
gem_init(struct ifnet *ifp)
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)ifp->if_softc;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
int s;
|
|
u_int max_frame_size;
|
|
u_int32_t v;
|
|
|
|
s = splnet();
|
|
|
|
DPRINTF(sc, ("%s: gem_init: calling stop\n", sc->sc_dev.dv_xname));
|
|
/*
|
|
* Initialization sequence. The numbered steps below correspond
|
|
* to the sequence outlined in section 6.3.5.1 in the Ethernet
|
|
* Channel Engine manual (part of the PCIO manual).
|
|
* See also the STP2002-STQ document from Sun Microsystems.
|
|
*/
|
|
|
|
/* step 1 & 2. Reset the Ethernet Channel */
|
|
gem_stop(ifp, 0);
|
|
gem_reset(sc);
|
|
DPRINTF(sc, ("%s: gem_init: restarting\n", sc->sc_dev.dv_xname));
|
|
|
|
/* Re-initialize the MIF */
|
|
gem_mifinit(sc);
|
|
|
|
/* Call MI reset function if any */
|
|
if (sc->sc_hwreset)
|
|
(*sc->sc_hwreset)(sc);
|
|
|
|
/* step 3. Setup data structures in host memory */
|
|
gem_meminit(sc);
|
|
|
|
/* step 4. TX MAC registers & counters */
|
|
gem_init_regs(sc);
|
|
max_frame_size = max(sc->sc_ethercom.ec_if.if_mtu, ETHERMTU);
|
|
max_frame_size += ETHER_HDR_LEN + ETHER_CRC_LEN;
|
|
if (sc->sc_ethercom.ec_capenable & ETHERCAP_VLAN_MTU)
|
|
max_frame_size += ETHER_VLAN_ENCAP_LEN;
|
|
bus_space_write_4(t, h, GEM_MAC_MAC_MAX_FRAME,
|
|
max_frame_size|/* burst size */(0x2000<<16));
|
|
|
|
/* step 5. RX MAC registers & counters */
|
|
gem_setladrf(sc);
|
|
|
|
/* step 6 & 7. Program Descriptor Ring Base Addresses */
|
|
/* NOTE: we use only 32-bit DMA addresses here. */
|
|
bus_space_write_4(t, h, GEM_TX_RING_PTR_HI, 0);
|
|
bus_space_write_4(t, h, GEM_TX_RING_PTR_LO, GEM_CDTXADDR(sc, 0));
|
|
|
|
bus_space_write_4(t, h, GEM_RX_RING_PTR_HI, 0);
|
|
bus_space_write_4(t, h, GEM_RX_RING_PTR_LO, GEM_CDRXADDR(sc, 0));
|
|
|
|
/* step 8. Global Configuration & Interrupt Mask */
|
|
bus_space_write_4(t, h, GEM_INTMASK,
|
|
~(GEM_INTR_TX_INTME|
|
|
GEM_INTR_TX_EMPTY|
|
|
GEM_INTR_RX_DONE|GEM_INTR_RX_NOBUF|
|
|
GEM_INTR_RX_TAG_ERR|GEM_INTR_PCS|
|
|
GEM_INTR_MAC_CONTROL|GEM_INTR_MIF|
|
|
GEM_INTR_BERR));
|
|
bus_space_write_4(t, h, GEM_MAC_RX_MASK,
|
|
GEM_MAC_RX_DONE|GEM_MAC_RX_FRAME_CNT);
|
|
bus_space_write_4(t, h, GEM_MAC_TX_MASK, 0xffff); /* XXXX */
|
|
bus_space_write_4(t, h, GEM_MAC_CONTROL_MASK, 0); /* XXXX */
|
|
|
|
/* step 9. ETX Configuration: use mostly default values */
|
|
|
|
/* Enable DMA */
|
|
v = gem_ringsize(GEM_NTXDESC /*XXX*/);
|
|
bus_space_write_4(t, h, GEM_TX_CONFIG,
|
|
v|GEM_TX_CONFIG_TXDMA_EN|
|
|
((0x400<<10)&GEM_TX_CONFIG_TXFIFO_TH));
|
|
bus_space_write_4(t, h, GEM_TX_KICK, sc->sc_txnext);
|
|
|
|
/* step 10. ERX Configuration */
|
|
|
|
/* Encode Receive Descriptor ring size: four possible values */
|
|
v = gem_ringsize(GEM_NRXDESC /*XXX*/);
|
|
|
|
/* Enable DMA */
|
|
bus_space_write_4(t, h, GEM_RX_CONFIG,
|
|
v|(GEM_THRSH_1024<<GEM_RX_CONFIG_FIFO_THRS_SHIFT)|
|
|
(2<<GEM_RX_CONFIG_FBOFF_SHFT)|GEM_RX_CONFIG_RXDMA_EN|
|
|
(0<<GEM_RX_CONFIG_CXM_START_SHFT));
|
|
/*
|
|
* The following value is for an OFF Threshold of about 3/4 full
|
|
* and an ON Threshold of 1/4 full.
|
|
*/
|
|
bus_space_write_4(t, h, GEM_RX_PAUSE_THRESH,
|
|
(3 * sc->sc_rxfifosize / 256) |
|
|
( (sc->sc_rxfifosize / 256) << 12));
|
|
bus_space_write_4(t, h, GEM_RX_BLANKING, (6<<12)|6);
|
|
|
|
/* step 11. Configure Media */
|
|
mii_mediachg(&sc->sc_mii);
|
|
|
|
/* XXXX Serial link needs a whole different setup. */
|
|
|
|
|
|
/* step 12. RX_MAC Configuration Register */
|
|
v = bus_space_read_4(t, h, GEM_MAC_RX_CONFIG);
|
|
v |= GEM_MAC_RX_ENABLE;
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CONFIG, v);
|
|
|
|
/* step 14. Issue Transmit Pending command */
|
|
|
|
/* Call MI initialization function if any */
|
|
if (sc->sc_hwinit)
|
|
(*sc->sc_hwinit)(sc);
|
|
|
|
|
|
/* step 15. Give the reciever a swift kick */
|
|
bus_space_write_4(t, h, GEM_RX_KICK, GEM_NRXDESC-4);
|
|
|
|
/* Start the one second timer. */
|
|
callout_reset(&sc->sc_tick_ch, hz, gem_tick, sc);
|
|
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
ifp->if_timer = 0;
|
|
splx(s);
|
|
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
gem_init_regs(struct gem_softc *sc)
|
|
{
|
|
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
const u_char *laddr = LLADDR(ifp->if_sadl);
|
|
u_int32_t v;
|
|
|
|
/* These regs are not cleared on reset */
|
|
if (!sc->sc_inited) {
|
|
|
|
/* Wooo. Magic values. */
|
|
bus_space_write_4(t, h, GEM_MAC_IPG0, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_IPG1, 8);
|
|
bus_space_write_4(t, h, GEM_MAC_IPG2, 4);
|
|
|
|
bus_space_write_4(t, h, GEM_MAC_MAC_MIN_FRAME, ETHER_MIN_LEN);
|
|
/* Max frame and max burst size */
|
|
bus_space_write_4(t, h, GEM_MAC_MAC_MAX_FRAME,
|
|
ETHER_MAX_LEN | (0x2000<<16));
|
|
|
|
bus_space_write_4(t, h, GEM_MAC_PREAMBLE_LEN, 0x7);
|
|
bus_space_write_4(t, h, GEM_MAC_JAM_SIZE, 0x4);
|
|
bus_space_write_4(t, h, GEM_MAC_ATTEMPT_LIMIT, 0x10);
|
|
/* Dunno.... */
|
|
bus_space_write_4(t, h, GEM_MAC_CONTROL_TYPE, 0x8088);
|
|
bus_space_write_4(t, h, GEM_MAC_RANDOM_SEED,
|
|
((laddr[5]<<8)|laddr[4])&0x3ff);
|
|
|
|
/* Secondary MAC addr set to 0:0:0:0:0:0 */
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR3, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR4, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR5, 0);
|
|
|
|
/* MAC control addr set to 01:80:c2:00:00:01 */
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR6, 0x0001);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR7, 0xc200);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR8, 0x0180);
|
|
|
|
/* MAC filter addr set to 0:0:0:0:0:0 */
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR_FILTER0, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR_FILTER1, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR_FILTER2, 0);
|
|
|
|
bus_space_write_4(t, h, GEM_MAC_ADR_FLT_MASK1_2, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADR_FLT_MASK0, 0);
|
|
|
|
sc->sc_inited = 1;
|
|
}
|
|
|
|
/* Counters need to be zeroed */
|
|
bus_space_write_4(t, h, GEM_MAC_NORM_COLL_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_FIRST_COLL_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_EXCESS_COLL_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_LATE_COLL_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_DEFER_TMR_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_PEAK_ATTEMPTS, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_FRAME_COUNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_LEN_ERR_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_ALIGN_ERR, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CRC_ERR_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CODE_VIOL, 0);
|
|
|
|
/* Un-pause stuff */
|
|
#if 0
|
|
bus_space_write_4(t, h, GEM_MAC_SEND_PAUSE_CMD, 0x1BF0);
|
|
#else
|
|
bus_space_write_4(t, h, GEM_MAC_SEND_PAUSE_CMD, 0);
|
|
#endif
|
|
|
|
/*
|
|
* Set the station address.
|
|
*/
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR0, (laddr[4]<<8)|laddr[5]);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR1, (laddr[2]<<8)|laddr[3]);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR2, (laddr[0]<<8)|laddr[1]);
|
|
|
|
#if 0
|
|
if (sc->sc_variant != APPLE_GMAC)
|
|
return;
|
|
#endif
|
|
|
|
/*
|
|
* Enable MII outputs. Enable GMII if there is a gigabit PHY.
|
|
*/
|
|
sc->sc_mif_config = bus_space_read_4(t, h, GEM_MIF_CONFIG);
|
|
v = GEM_MAC_XIF_TX_MII_ENA;
|
|
if (sc->sc_mif_config & GEM_MIF_CONFIG_MDI1) {
|
|
v |= GEM_MAC_XIF_FDPLX_LED;
|
|
if (sc->sc_flags & GEM_GIGABIT)
|
|
v |= GEM_MAC_XIF_GMII_MODE;
|
|
}
|
|
bus_space_write_4(t, h, GEM_MAC_XIF_CONFIG, v);
|
|
}
|
|
|
|
void
|
|
gem_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)ifp->if_softc;
|
|
struct mbuf *m0, *m;
|
|
struct gem_txsoft *txs, *last_txs;
|
|
bus_dmamap_t dmamap;
|
|
int error, firsttx, nexttx, lasttx, ofree, seg;
|
|
|
|
if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
|
|
return;
|
|
|
|
/*
|
|
* Remember the previous number of free descriptors and
|
|
* the first descriptor we'll use.
|
|
*/
|
|
ofree = sc->sc_txfree;
|
|
firsttx = sc->sc_txnext;
|
|
|
|
DPRINTF(sc, ("%s: gem_start: txfree %d, txnext %d\n",
|
|
sc->sc_dev.dv_xname, ofree, firsttx));
|
|
|
|
/*
|
|
* Loop through the send queue, setting up transmit descriptors
|
|
* until we drain the queue, or use up all available transmit
|
|
* descriptors.
|
|
*/
|
|
while ((txs = SIMPLEQ_FIRST(&sc->sc_txfreeq)) != NULL &&
|
|
sc->sc_txfree != 0) {
|
|
/*
|
|
* Grab a packet off the queue.
|
|
*/
|
|
IFQ_POLL(&ifp->if_snd, m0);
|
|
if (m0 == NULL)
|
|
break;
|
|
m = NULL;
|
|
|
|
dmamap = txs->txs_dmamap;
|
|
|
|
/*
|
|
* Load the DMA map. If this fails, the packet either
|
|
* didn't fit in the alloted number of segments, or we were
|
|
* short on resources. In this case, we'll copy and try
|
|
* again.
|
|
*/
|
|
if (bus_dmamap_load_mbuf(sc->sc_dmatag, dmamap, m0,
|
|
BUS_DMA_WRITE|BUS_DMA_NOWAIT) != 0) {
|
|
if (m0->m_pkthdr.len > MCLBYTES) {
|
|
printf("%s: unable to allocate jumbo Tx "
|
|
"cluster\n", sc->sc_dev.dv_xname);
|
|
IFQ_DEQUEUE(&ifp->if_snd, m0);
|
|
m_freem(m0);
|
|
continue;
|
|
}
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m == NULL) {
|
|
printf("%s: unable to allocate Tx mbuf\n",
|
|
sc->sc_dev.dv_xname);
|
|
break;
|
|
}
|
|
MCLAIM(m, &sc->sc_ethercom.ec_tx_mowner);
|
|
if (m0->m_pkthdr.len > MHLEN) {
|
|
MCLGET(m, M_DONTWAIT);
|
|
if ((m->m_flags & M_EXT) == 0) {
|
|
printf("%s: unable to allocate Tx "
|
|
"cluster\n", sc->sc_dev.dv_xname);
|
|
m_freem(m);
|
|
break;
|
|
}
|
|
}
|
|
m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, caddr_t));
|
|
m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len;
|
|
error = bus_dmamap_load_mbuf(sc->sc_dmatag, dmamap,
|
|
m, BUS_DMA_WRITE|BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("%s: unable to load Tx buffer, "
|
|
"error = %d\n", sc->sc_dev.dv_xname, error);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Ensure we have enough descriptors free to describe
|
|
* the packet.
|
|
*/
|
|
if (dmamap->dm_nsegs > sc->sc_txfree) {
|
|
/*
|
|
* Not enough free descriptors to transmit this
|
|
* packet. We haven't committed to anything yet,
|
|
* so just unload the DMA map, put the packet
|
|
* back on the queue, and punt. Notify the upper
|
|
* layer that there are no more slots left.
|
|
*
|
|
* XXX We could allocate an mbuf and copy, but
|
|
* XXX it is worth it?
|
|
*/
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
bus_dmamap_unload(sc->sc_dmatag, dmamap);
|
|
if (m != NULL)
|
|
m_freem(m);
|
|
break;
|
|
}
|
|
|
|
IFQ_DEQUEUE(&ifp->if_snd, m0);
|
|
if (m != NULL) {
|
|
m_freem(m0);
|
|
m0 = m;
|
|
}
|
|
|
|
/*
|
|
* WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET.
|
|
*/
|
|
|
|
/* Sync the DMA map. */
|
|
bus_dmamap_sync(sc->sc_dmatag, dmamap, 0, dmamap->dm_mapsize,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
/*
|
|
* Initialize the transmit descriptors.
|
|
*/
|
|
for (nexttx = sc->sc_txnext, seg = 0;
|
|
seg < dmamap->dm_nsegs;
|
|
seg++, nexttx = GEM_NEXTTX(nexttx)) {
|
|
uint64_t flags;
|
|
|
|
/*
|
|
* If this is the first descriptor we're
|
|
* enqueueing, set the start of packet flag,
|
|
* and the checksum stuff if we want the hardware
|
|
* to do it.
|
|
*/
|
|
sc->sc_txdescs[nexttx].gd_addr =
|
|
GEM_DMA_WRITE(sc, dmamap->dm_segs[seg].ds_addr);
|
|
flags = dmamap->dm_segs[seg].ds_len & GEM_TD_BUFSIZE;
|
|
if (nexttx == firsttx) {
|
|
flags |= GEM_TD_START_OF_PACKET;
|
|
if (++sc->sc_txwin > GEM_NTXSEGS * 2 / 3) {
|
|
sc->sc_txwin = 0;
|
|
flags |= GEM_TD_INTERRUPT_ME;
|
|
}
|
|
}
|
|
if (seg == dmamap->dm_nsegs - 1) {
|
|
flags |= GEM_TD_END_OF_PACKET;
|
|
}
|
|
sc->sc_txdescs[nexttx].gd_flags =
|
|
GEM_DMA_WRITE(sc, flags);
|
|
lasttx = nexttx;
|
|
}
|
|
|
|
#ifdef GEM_DEBUG
|
|
if (ifp->if_flags & IFF_DEBUG) {
|
|
printf(" gem_start %p transmit chain:\n", txs);
|
|
for (seg = sc->sc_txnext;; seg = GEM_NEXTTX(seg)) {
|
|
printf("descriptor %d:\t", seg);
|
|
printf("gd_flags: 0x%016llx\t", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_txdescs[seg].gd_flags));
|
|
printf("gd_addr: 0x%016llx\n", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_txdescs[seg].gd_addr));
|
|
if (seg == lasttx)
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Sync the descriptors we're using. */
|
|
GEM_CDTXSYNC(sc, sc->sc_txnext, dmamap->dm_nsegs,
|
|
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
|
|
|
|
/*
|
|
* Store a pointer to the packet so we can free it later,
|
|
* and remember what txdirty will be once the packet is
|
|
* done.
|
|
*/
|
|
txs->txs_mbuf = m0;
|
|
txs->txs_firstdesc = sc->sc_txnext;
|
|
txs->txs_lastdesc = lasttx;
|
|
txs->txs_ndescs = dmamap->dm_nsegs;
|
|
|
|
/* Advance the tx pointer. */
|
|
sc->sc_txfree -= dmamap->dm_nsegs;
|
|
sc->sc_txnext = nexttx;
|
|
|
|
SIMPLEQ_REMOVE_HEAD(&sc->sc_txfreeq, txs_q);
|
|
SIMPLEQ_INSERT_TAIL(&sc->sc_txdirtyq, txs, txs_q);
|
|
|
|
last_txs = txs;
|
|
|
|
#if NBPFILTER > 0
|
|
/*
|
|
* Pass the packet to any BPF listeners.
|
|
*/
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp->if_bpf, m0);
|
|
#endif /* NBPFILTER > 0 */
|
|
}
|
|
|
|
if (txs == NULL || sc->sc_txfree == 0) {
|
|
/* No more slots left; notify upper layer. */
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
}
|
|
|
|
if (sc->sc_txfree != ofree) {
|
|
DPRINTF(sc, ("%s: packets enqueued, IC on %d, OWN on %d\n",
|
|
sc->sc_dev.dv_xname, lasttx, firsttx));
|
|
/*
|
|
* The entire packet chain is set up.
|
|
* Kick the transmitter.
|
|
*/
|
|
DPRINTF(sc, ("%s: gem_start: kicking tx %d\n",
|
|
sc->sc_dev.dv_xname, nexttx));
|
|
bus_space_write_4(sc->sc_bustag, sc->sc_h, GEM_TX_KICK,
|
|
sc->sc_txnext);
|
|
|
|
/* Set a watchdog timer in case the chip flakes out. */
|
|
ifp->if_timer = 5;
|
|
DPRINTF(sc, ("%s: gem_start: watchdog %d\n",
|
|
sc->sc_dev.dv_xname, ifp->if_timer));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Transmit interrupt.
|
|
*/
|
|
int
|
|
gem_tint(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mac = sc->sc_h;
|
|
struct gem_txsoft *txs;
|
|
int txlast;
|
|
int progress = 0;
|
|
|
|
|
|
DPRINTF(sc, ("%s: gem_tint\n", sc->sc_dev.dv_xname));
|
|
|
|
/*
|
|
* Unload collision counters
|
|
*/
|
|
ifp->if_collisions +=
|
|
bus_space_read_4(t, mac, GEM_MAC_NORM_COLL_CNT) +
|
|
bus_space_read_4(t, mac, GEM_MAC_FIRST_COLL_CNT) +
|
|
bus_space_read_4(t, mac, GEM_MAC_EXCESS_COLL_CNT) +
|
|
bus_space_read_4(t, mac, GEM_MAC_LATE_COLL_CNT);
|
|
|
|
/*
|
|
* then clear the hardware counters.
|
|
*/
|
|
bus_space_write_4(t, mac, GEM_MAC_NORM_COLL_CNT, 0);
|
|
bus_space_write_4(t, mac, GEM_MAC_FIRST_COLL_CNT, 0);
|
|
bus_space_write_4(t, mac, GEM_MAC_EXCESS_COLL_CNT, 0);
|
|
bus_space_write_4(t, mac, GEM_MAC_LATE_COLL_CNT, 0);
|
|
|
|
/*
|
|
* Go through our Tx list and free mbufs for those
|
|
* frames that have been transmitted.
|
|
*/
|
|
while ((txs = SIMPLEQ_FIRST(&sc->sc_txdirtyq)) != NULL) {
|
|
GEM_CDTXSYNC(sc, txs->txs_lastdesc,
|
|
txs->txs_ndescs,
|
|
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
|
|
|
|
#ifdef GEM_DEBUG
|
|
if (ifp->if_flags & IFF_DEBUG) {
|
|
int i;
|
|
printf(" txsoft %p transmit chain:\n", txs);
|
|
for (i = txs->txs_firstdesc;; i = GEM_NEXTTX(i)) {
|
|
printf("descriptor %d: ", i);
|
|
printf("gd_flags: 0x%016llx\t", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_txdescs[i].gd_flags));
|
|
printf("gd_addr: 0x%016llx\n", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_txdescs[i].gd_addr));
|
|
if (i == txs->txs_lastdesc)
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* In theory, we could harveast some descriptors before
|
|
* the ring is empty, but that's a bit complicated.
|
|
*
|
|
* GEM_TX_COMPLETION points to the last descriptor
|
|
* processed +1.
|
|
*/
|
|
txlast = bus_space_read_4(t, mac, GEM_TX_COMPLETION);
|
|
DPRINTF(sc,
|
|
("gem_tint: txs->txs_lastdesc = %d, txlast = %d\n",
|
|
txs->txs_lastdesc, txlast));
|
|
if (txs->txs_firstdesc <= txs->txs_lastdesc) {
|
|
if ((txlast >= txs->txs_firstdesc) &&
|
|
(txlast <= txs->txs_lastdesc))
|
|
break;
|
|
} else {
|
|
/* Ick -- this command wraps */
|
|
if ((txlast >= txs->txs_firstdesc) ||
|
|
(txlast <= txs->txs_lastdesc))
|
|
break;
|
|
}
|
|
|
|
DPRINTF(sc, ("gem_tint: releasing a desc\n"));
|
|
SIMPLEQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q);
|
|
|
|
sc->sc_txfree += txs->txs_ndescs;
|
|
|
|
if (txs->txs_mbuf == NULL) {
|
|
#ifdef DIAGNOSTIC
|
|
panic("gem_txintr: null mbuf");
|
|
#endif
|
|
}
|
|
|
|
bus_dmamap_sync(sc->sc_dmatag, txs->txs_dmamap,
|
|
0, txs->txs_dmamap->dm_mapsize,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sc_dmatag, txs->txs_dmamap);
|
|
m_freem(txs->txs_mbuf);
|
|
txs->txs_mbuf = NULL;
|
|
|
|
SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
|
|
ifp->if_opackets++;
|
|
progress = 1;
|
|
}
|
|
|
|
DPRINTF(sc, ("gem_tint: GEM_TX_STATE_MACHINE %x "
|
|
"GEM_TX_DATA_PTR %llx "
|
|
"GEM_TX_COMPLETION %x\n",
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_TX_STATE_MACHINE),
|
|
((long long) bus_space_read_4(sc->sc_bustag, sc->sc_h,
|
|
GEM_TX_DATA_PTR_HI) << 32) |
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h,
|
|
GEM_TX_DATA_PTR_LO),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_TX_COMPLETION)));
|
|
|
|
if (progress) {
|
|
if (sc->sc_txfree == GEM_NTXDESC - 1)
|
|
sc->sc_txwin = 0;
|
|
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
gem_start(ifp);
|
|
|
|
if (SIMPLEQ_EMPTY(&sc->sc_txdirtyq))
|
|
ifp->if_timer = 0;
|
|
}
|
|
DPRINTF(sc, ("%s: gem_tint: watchdog %d\n",
|
|
sc->sc_dev.dv_xname, ifp->if_timer));
|
|
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Receive interrupt.
|
|
*/
|
|
int
|
|
gem_rint(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
struct ether_header *eh;
|
|
struct gem_rxsoft *rxs;
|
|
struct mbuf *m;
|
|
u_int64_t rxstat;
|
|
u_int32_t rxcomp;
|
|
int i, len, progress = 0;
|
|
|
|
DPRINTF(sc, ("%s: gem_rint\n", sc->sc_dev.dv_xname));
|
|
|
|
/*
|
|
* Read the completion register once. This limits
|
|
* how long the following loop can execute.
|
|
*/
|
|
rxcomp = bus_space_read_4(t, h, GEM_RX_COMPLETION);
|
|
|
|
/*
|
|
* XXXX Read the lastrx only once at the top for speed.
|
|
*/
|
|
DPRINTF(sc, ("gem_rint: sc->rxptr %d, complete %d\n",
|
|
sc->sc_rxptr, rxcomp));
|
|
|
|
/*
|
|
* Go into the loop at least once.
|
|
*/
|
|
for (i = sc->sc_rxptr; i == sc->sc_rxptr || i != rxcomp;
|
|
i = GEM_NEXTRX(i)) {
|
|
rxs = &sc->sc_rxsoft[i];
|
|
|
|
GEM_CDRXSYNC(sc, i,
|
|
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
|
|
|
|
rxstat = GEM_DMA_READ(sc, sc->sc_rxdescs[i].gd_flags);
|
|
|
|
if (rxstat & GEM_RD_OWN) {
|
|
/*
|
|
* We have processed all of the receive buffers.
|
|
*/
|
|
break;
|
|
}
|
|
|
|
progress++;
|
|
ifp->if_ipackets++;
|
|
|
|
if (rxstat & GEM_RD_BAD_CRC) {
|
|
ifp->if_ierrors++;
|
|
printf("%s: receive error: CRC error\n",
|
|
sc->sc_dev.dv_xname);
|
|
GEM_INIT_RXDESC(sc, i);
|
|
continue;
|
|
}
|
|
|
|
bus_dmamap_sync(sc->sc_dmatag, rxs->rxs_dmamap, 0,
|
|
rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD);
|
|
#ifdef GEM_DEBUG
|
|
if (ifp->if_flags & IFF_DEBUG) {
|
|
printf(" rxsoft %p descriptor %d: ", rxs, i);
|
|
printf("gd_flags: 0x%016llx\t", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_rxdescs[i].gd_flags));
|
|
printf("gd_addr: 0x%016llx\n", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_rxdescs[i].gd_addr));
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* No errors; receive the packet. Note the Gem
|
|
* includes the CRC with every packet.
|
|
*/
|
|
len = GEM_RD_BUFLEN(rxstat);
|
|
|
|
/*
|
|
* Allocate a new mbuf cluster. If that fails, we are
|
|
* out of memory, and must drop the packet and recycle
|
|
* the buffer that's already attached to this descriptor.
|
|
*/
|
|
m = rxs->rxs_mbuf;
|
|
if (gem_add_rxbuf(sc, i) != 0) {
|
|
GEM_COUNTER_INCR(sc, sc_ev_rxnobuf);
|
|
ifp->if_ierrors++;
|
|
GEM_INIT_RXDESC(sc, i);
|
|
bus_dmamap_sync(sc->sc_dmatag, rxs->rxs_dmamap, 0,
|
|
rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
|
|
continue;
|
|
}
|
|
m->m_data += 2; /* We're already off by two */
|
|
|
|
eh = mtod(m, struct ether_header *);
|
|
m->m_flags |= M_HASFCS;
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = m->m_len = len;
|
|
|
|
#if NBPFILTER > 0
|
|
/*
|
|
* Pass this up to any BPF listeners, but only
|
|
* pass it up the stack if its for us.
|
|
*/
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp->if_bpf, m);
|
|
#endif /* NPBFILTER > 0 */
|
|
|
|
/* Pass it on. */
|
|
(*ifp->if_input)(ifp, m);
|
|
}
|
|
|
|
if (progress) {
|
|
/* Update the receive pointer. */
|
|
if (i == sc->sc_rxptr) {
|
|
GEM_COUNTER_INCR(sc, sc_ev_rxfull);
|
|
#ifdef GEM_DEBUG
|
|
if (ifp->if_flags & GEM_DEBUG)
|
|
printf("%s: rint: ring wrap\n",
|
|
sc->sc_dev.dv_xname);
|
|
#endif
|
|
}
|
|
sc->sc_rxptr = i;
|
|
bus_space_write_4(t, h, GEM_RX_KICK, GEM_PREVRX(i));
|
|
}
|
|
#ifdef GEM_COUNTERS
|
|
if (progress <= 4) {
|
|
GEM_COUNTER_INCR(sc, sc_ev_rxhist[progress]);
|
|
} else if (progress > 31) {
|
|
if (progress < 16)
|
|
GEM_COUNTER_INCR(sc, sc_ev_rxhist[5]);
|
|
else
|
|
GEM_COUNTER_INCR(sc, sc_ev_rxhist[6]);
|
|
|
|
} else {
|
|
if (progress < 64)
|
|
GEM_COUNTER_INCR(sc, sc_ev_rxhist[7]);
|
|
else
|
|
GEM_COUNTER_INCR(sc, sc_ev_rxhist[8]);
|
|
}
|
|
#endif
|
|
|
|
DPRINTF(sc, ("gem_rint: done sc->rxptr %d, complete %d\n",
|
|
sc->sc_rxptr, bus_space_read_4(t, h, GEM_RX_COMPLETION)));
|
|
|
|
return (1);
|
|
}
|
|
|
|
|
|
/*
|
|
* gem_add_rxbuf:
|
|
*
|
|
* Add a receive buffer to the indicated descriptor.
|
|
*/
|
|
int
|
|
gem_add_rxbuf(struct gem_softc *sc, int idx)
|
|
{
|
|
struct gem_rxsoft *rxs = &sc->sc_rxsoft[idx];
|
|
struct mbuf *m;
|
|
int error;
|
|
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m == NULL)
|
|
return (ENOBUFS);
|
|
|
|
MCLAIM(m, &sc->sc_ethercom.ec_rx_mowner);
|
|
MCLGET(m, M_DONTWAIT);
|
|
if ((m->m_flags & M_EXT) == 0) {
|
|
m_freem(m);
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
#ifdef GEM_DEBUG
|
|
/* bzero the packet to check DMA */
|
|
memset(m->m_ext.ext_buf, 0, m->m_ext.ext_size);
|
|
#endif
|
|
|
|
if (rxs->rxs_mbuf != NULL)
|
|
bus_dmamap_unload(sc->sc_dmatag, rxs->rxs_dmamap);
|
|
|
|
rxs->rxs_mbuf = m;
|
|
|
|
error = bus_dmamap_load(sc->sc_dmatag, rxs->rxs_dmamap,
|
|
m->m_ext.ext_buf, m->m_ext.ext_size, NULL,
|
|
BUS_DMA_READ|BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("%s: can't load rx DMA map %d, error = %d\n",
|
|
sc->sc_dev.dv_xname, idx, error);
|
|
panic("gem_add_rxbuf"); /* XXX */
|
|
}
|
|
|
|
bus_dmamap_sync(sc->sc_dmatag, rxs->rxs_dmamap, 0,
|
|
rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
|
|
|
|
GEM_INIT_RXDESC(sc, idx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
int
|
|
gem_eint(sc, status)
|
|
struct gem_softc *sc;
|
|
u_int status;
|
|
{
|
|
char bits[128];
|
|
|
|
if ((status & GEM_INTR_MIF) != 0) {
|
|
printf("%s: XXXlink status changed\n", sc->sc_dev.dv_xname);
|
|
return (1);
|
|
}
|
|
|
|
printf("%s: status=%s\n", sc->sc_dev.dv_xname,
|
|
bitmask_snprintf(status, GEM_INTR_BITS, bits, sizeof(bits)));
|
|
return (1);
|
|
}
|
|
|
|
|
|
int
|
|
gem_intr(v)
|
|
void *v;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)v;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t seb = sc->sc_h;
|
|
u_int32_t status;
|
|
int r = 0;
|
|
#ifdef GEM_DEBUG
|
|
char bits[128];
|
|
#endif
|
|
|
|
sc->sc_ev_intr.ev_count++;
|
|
|
|
status = bus_space_read_4(t, seb, GEM_STATUS);
|
|
DPRINTF(sc, ("%s: gem_intr: cplt %xstatus %s\n",
|
|
sc->sc_dev.dv_xname, (status>>19),
|
|
bitmask_snprintf(status, GEM_INTR_BITS, bits, sizeof(bits))));
|
|
|
|
if ((status & (GEM_INTR_RX_TAG_ERR | GEM_INTR_BERR)) != 0)
|
|
r |= gem_eint(sc, status);
|
|
|
|
if ((status & (GEM_INTR_TX_EMPTY | GEM_INTR_TX_INTME)) != 0) {
|
|
GEM_COUNTER_INCR(sc, sc_ev_txint);
|
|
r |= gem_tint(sc);
|
|
}
|
|
|
|
if ((status & (GEM_INTR_RX_DONE | GEM_INTR_RX_NOBUF)) != 0) {
|
|
GEM_COUNTER_INCR(sc, sc_ev_rxint);
|
|
r |= gem_rint(sc);
|
|
}
|
|
|
|
/* We should eventually do more than just print out error stats. */
|
|
if (status & GEM_INTR_TX_MAC) {
|
|
int txstat = bus_space_read_4(t, seb, GEM_MAC_TX_STATUS);
|
|
if (txstat & ~GEM_MAC_TX_XMIT_DONE)
|
|
printf("%s: MAC tx fault, status %x\n",
|
|
sc->sc_dev.dv_xname, txstat);
|
|
}
|
|
if (status & GEM_INTR_RX_MAC) {
|
|
int rxstat = bus_space_read_4(t, seb, GEM_MAC_RX_STATUS);
|
|
if (rxstat & ~GEM_MAC_RX_DONE)
|
|
printf("%s: MAC rx fault, status %x\n",
|
|
sc->sc_dev.dv_xname, rxstat);
|
|
}
|
|
return (r);
|
|
}
|
|
|
|
|
|
void
|
|
gem_watchdog(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct gem_softc *sc = ifp->if_softc;
|
|
|
|
DPRINTF(sc, ("gem_watchdog: GEM_RX_CONFIG %x GEM_MAC_RX_STATUS %x "
|
|
"GEM_MAC_RX_CONFIG %x\n",
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_RX_CONFIG),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_MAC_RX_STATUS),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_MAC_RX_CONFIG)));
|
|
|
|
log(LOG_ERR, "%s: device timeout\n", sc->sc_dev.dv_xname);
|
|
++ifp->if_oerrors;
|
|
|
|
/* Try to get more packets going. */
|
|
gem_start(ifp);
|
|
}
|
|
|
|
/*
|
|
* Initialize the MII Management Interface
|
|
*/
|
|
void
|
|
gem_mifinit(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mif = sc->sc_h;
|
|
|
|
/* Configure the MIF in frame mode */
|
|
sc->sc_mif_config = bus_space_read_4(t, mif, GEM_MIF_CONFIG);
|
|
sc->sc_mif_config &= ~GEM_MIF_CONFIG_BB_ENA;
|
|
bus_space_write_4(t, mif, GEM_MIF_CONFIG, sc->sc_mif_config);
|
|
}
|
|
|
|
/*
|
|
* MII interface
|
|
*
|
|
* The GEM MII interface supports at least three different operating modes:
|
|
*
|
|
* Bitbang mode is implemented using data, clock and output enable registers.
|
|
*
|
|
* Frame mode is implemented by loading a complete frame into the frame
|
|
* register and polling the valid bit for completion.
|
|
*
|
|
* Polling mode uses the frame register but completion is indicated by
|
|
* an interrupt.
|
|
*
|
|
*/
|
|
static int
|
|
gem_mii_readreg(self, phy, reg)
|
|
struct device *self;
|
|
int phy, reg;
|
|
{
|
|
struct gem_softc *sc = (void *)self;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mif = sc->sc_h;
|
|
int n;
|
|
u_int32_t v;
|
|
|
|
#ifdef GEM_DEBUG1
|
|
if (sc->sc_debug)
|
|
printf("gem_mii_readreg: phy %d reg %d\n", phy, reg);
|
|
#endif
|
|
|
|
#if 0
|
|
/* Select the desired PHY in the MIF configuration register */
|
|
v = bus_space_read_4(t, mif, GEM_MIF_CONFIG);
|
|
/* Clear PHY select bit */
|
|
v &= ~GEM_MIF_CONFIG_PHY_SEL;
|
|
if (phy == GEM_PHYAD_EXTERNAL)
|
|
/* Set PHY select bit to get at external device */
|
|
v |= GEM_MIF_CONFIG_PHY_SEL;
|
|
bus_space_write_4(t, mif, GEM_MIF_CONFIG, v);
|
|
#endif
|
|
|
|
/* Construct the frame command */
|
|
v = (reg << GEM_MIF_REG_SHIFT) | (phy << GEM_MIF_PHY_SHIFT) |
|
|
GEM_MIF_FRAME_READ;
|
|
|
|
bus_space_write_4(t, mif, GEM_MIF_FRAME, v);
|
|
for (n = 0; n < 100; n++) {
|
|
DELAY(1);
|
|
v = bus_space_read_4(t, mif, GEM_MIF_FRAME);
|
|
if (v & GEM_MIF_FRAME_TA0)
|
|
return (v & GEM_MIF_FRAME_DATA);
|
|
}
|
|
|
|
printf("%s: mii_read timeout\n", sc->sc_dev.dv_xname);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
gem_mii_writereg(self, phy, reg, val)
|
|
struct device *self;
|
|
int phy, reg, val;
|
|
{
|
|
struct gem_softc *sc = (void *)self;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mif = sc->sc_h;
|
|
int n;
|
|
u_int32_t v;
|
|
|
|
#ifdef GEM_DEBUG1
|
|
if (sc->sc_debug)
|
|
printf("gem_mii_writereg: phy %d reg %d val %x\n",
|
|
phy, reg, val);
|
|
#endif
|
|
|
|
#if 0
|
|
/* Select the desired PHY in the MIF configuration register */
|
|
v = bus_space_read_4(t, mif, GEM_MIF_CONFIG);
|
|
/* Clear PHY select bit */
|
|
v &= ~GEM_MIF_CONFIG_PHY_SEL;
|
|
if (phy == GEM_PHYAD_EXTERNAL)
|
|
/* Set PHY select bit to get at external device */
|
|
v |= GEM_MIF_CONFIG_PHY_SEL;
|
|
bus_space_write_4(t, mif, GEM_MIF_CONFIG, v);
|
|
#endif
|
|
/* Construct the frame command */
|
|
v = GEM_MIF_FRAME_WRITE |
|
|
(phy << GEM_MIF_PHY_SHIFT) |
|
|
(reg << GEM_MIF_REG_SHIFT) |
|
|
(val & GEM_MIF_FRAME_DATA);
|
|
|
|
bus_space_write_4(t, mif, GEM_MIF_FRAME, v);
|
|
for (n = 0; n < 100; n++) {
|
|
DELAY(1);
|
|
v = bus_space_read_4(t, mif, GEM_MIF_FRAME);
|
|
if (v & GEM_MIF_FRAME_TA0)
|
|
return;
|
|
}
|
|
|
|
printf("%s: mii_write timeout\n", sc->sc_dev.dv_xname);
|
|
}
|
|
|
|
static void
|
|
gem_mii_statchg(dev)
|
|
struct device *dev;
|
|
{
|
|
struct gem_softc *sc = (void *)dev;
|
|
#ifdef GEM_DEBUG
|
|
int instance = IFM_INST(sc->sc_mii.mii_media.ifm_cur->ifm_media);
|
|
#endif
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mac = sc->sc_h;
|
|
u_int32_t v;
|
|
|
|
#ifdef GEM_DEBUG
|
|
if (sc->sc_debug)
|
|
printf("gem_mii_statchg: status change: phy = %d\n",
|
|
sc->sc_phys[instance];);
|
|
#endif
|
|
|
|
|
|
/* Set tx full duplex options */
|
|
bus_space_write_4(t, mac, GEM_MAC_TX_CONFIG, 0);
|
|
delay(10000); /* reg must be cleared and delay before changing. */
|
|
v = GEM_MAC_TX_ENA_IPG0|GEM_MAC_TX_NGU|GEM_MAC_TX_NGU_LIMIT|
|
|
GEM_MAC_TX_ENABLE;
|
|
if ((IFM_OPTIONS(sc->sc_mii.mii_media_active) & IFM_FDX) != 0) {
|
|
v |= GEM_MAC_TX_IGN_CARRIER|GEM_MAC_TX_IGN_COLLIS;
|
|
}
|
|
bus_space_write_4(t, mac, GEM_MAC_TX_CONFIG, v);
|
|
|
|
/* XIF Configuration */
|
|
/* We should really calculate all this rather than rely on defaults */
|
|
v = bus_space_read_4(t, mac, GEM_MAC_XIF_CONFIG);
|
|
v = GEM_MAC_XIF_LINK_LED;
|
|
v |= GEM_MAC_XIF_TX_MII_ENA;
|
|
|
|
/* If an external transceiver is connected, enable its MII drivers */
|
|
sc->sc_mif_config = bus_space_read_4(t, mac, GEM_MIF_CONFIG);
|
|
if ((sc->sc_mif_config & GEM_MIF_CONFIG_MDI1) != 0) {
|
|
/* External MII needs echo disable if half duplex. */
|
|
if ((IFM_OPTIONS(sc->sc_mii.mii_media_active) & IFM_FDX) != 0)
|
|
/* turn on full duplex LED */
|
|
v |= GEM_MAC_XIF_FDPLX_LED;
|
|
else
|
|
/* half duplex -- disable echo */
|
|
v |= GEM_MAC_XIF_ECHO_DISABL;
|
|
|
|
if (sc->sc_ethercom.ec_if.if_baudrate == IF_Mbps(1000))
|
|
v |= GEM_MAC_XIF_GMII_MODE;
|
|
else
|
|
v &= ~GEM_MAC_XIF_GMII_MODE;
|
|
} else
|
|
/* Internal MII needs buf enable */
|
|
v |= GEM_MAC_XIF_MII_BUF_ENA;
|
|
bus_space_write_4(t, mac, GEM_MAC_XIF_CONFIG, v);
|
|
}
|
|
|
|
int
|
|
gem_mediachange(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct gem_softc *sc = ifp->if_softc;
|
|
|
|
if (IFM_TYPE(sc->sc_media.ifm_media) != IFM_ETHER)
|
|
return (EINVAL);
|
|
|
|
return (mii_mediachg(&sc->sc_mii));
|
|
}
|
|
|
|
void
|
|
gem_mediastatus(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct gem_softc *sc = ifp->if_softc;
|
|
|
|
if ((ifp->if_flags & IFF_UP) == 0)
|
|
return;
|
|
|
|
mii_pollstat(&sc->sc_mii);
|
|
ifmr->ifm_active = sc->sc_mii.mii_media_active;
|
|
ifmr->ifm_status = sc->sc_mii.mii_media_status;
|
|
}
|
|
|
|
int gem_ioctldebug = 0;
|
|
/*
|
|
* Process an ioctl request.
|
|
*/
|
|
int
|
|
gem_ioctl(ifp, cmd, data)
|
|
struct ifnet *ifp;
|
|
u_long cmd;
|
|
caddr_t data;
|
|
{
|
|
struct gem_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
int s, error = 0;
|
|
|
|
s = splnet();
|
|
|
|
switch (cmd) {
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->sc_media, cmd);
|
|
break;
|
|
|
|
default:
|
|
error = ether_ioctl(ifp, cmd, data);
|
|
if (error == ENETRESET) {
|
|
/*
|
|
* Multicast list has changed; set the hardware filter
|
|
* accordingly.
|
|
*/
|
|
if (gem_ioctldebug) printf("reset1\n");
|
|
gem_init(ifp);
|
|
delay(50000);
|
|
error = 0;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* Try to get things going again */
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (gem_ioctldebug) printf("start\n");
|
|
gem_start(ifp);
|
|
}
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
|
|
|
|
void
|
|
gem_shutdown(arg)
|
|
void *arg;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)arg;
|
|
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
|
|
|
|
gem_stop(ifp, 1);
|
|
}
|
|
|
|
/*
|
|
* Set up the logical address filter.
|
|
*/
|
|
void
|
|
gem_setladrf(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ethercom *ec = &sc->sc_ethercom;
|
|
struct ifnet *ifp = &ec->ec_if;
|
|
struct ether_multi *enm;
|
|
struct ether_multistep step;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
u_int32_t crc;
|
|
u_int32_t hash[16];
|
|
u_int32_t v;
|
|
int i;
|
|
|
|
/* Get current RX configuration */
|
|
v = bus_space_read_4(t, h, GEM_MAC_RX_CONFIG);
|
|
|
|
/*
|
|
* Turn off promiscuous mode, promiscuous group mode (all multicast),
|
|
* and hash filter. Depending on the case, the right bit will be
|
|
* enabled.
|
|
*/
|
|
v &= ~(GEM_MAC_RX_PROMISCUOUS|GEM_MAC_RX_HASH_FILTER|
|
|
GEM_MAC_RX_PROMISC_GRP);
|
|
|
|
if ((ifp->if_flags & IFF_PROMISC) != 0) {
|
|
/* Turn on promiscuous mode */
|
|
v |= GEM_MAC_RX_PROMISCUOUS;
|
|
ifp->if_flags |= IFF_ALLMULTI;
|
|
goto chipit;
|
|
}
|
|
|
|
/*
|
|
* Set up multicast address filter by passing all multicast addresses
|
|
* through a crc generator, and then using the high order 8 bits as an
|
|
* index into the 256 bit logical address filter. The high order 4
|
|
* bits select the word, while the other 4 bits select the bit within
|
|
* the word (where bit 0 is the MSB).
|
|
*/
|
|
|
|
/* Clear hash table */
|
|
memset(hash, 0, sizeof(hash));
|
|
|
|
ETHER_FIRST_MULTI(step, ec, enm);
|
|
while (enm != NULL) {
|
|
if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
|
|
/*
|
|
* We must listen to a range of multicast addresses.
|
|
* For now, just accept all multicasts, rather than
|
|
* trying to set only those filter bits needed to match
|
|
* the range. (At this time, the only use of address
|
|
* ranges is for IP multicast routing, for which the
|
|
* range is big enough to require all bits set.)
|
|
* XXX use the addr filter for this
|
|
*/
|
|
ifp->if_flags |= IFF_ALLMULTI;
|
|
v |= GEM_MAC_RX_PROMISC_GRP;
|
|
goto chipit;
|
|
}
|
|
|
|
/* Get the LE CRC32 of the address */
|
|
crc = ether_crc32_le(enm->enm_addrlo, sizeof(enm->enm_addrlo));
|
|
|
|
/* Just want the 8 most significant bits. */
|
|
crc >>= 24;
|
|
|
|
/* Set the corresponding bit in the filter. */
|
|
hash[crc >> 4] |= 1 << (15 - (crc & 15));
|
|
|
|
ETHER_NEXT_MULTI(step, enm);
|
|
}
|
|
|
|
v |= GEM_MAC_RX_HASH_FILTER;
|
|
ifp->if_flags &= ~IFF_ALLMULTI;
|
|
|
|
/* Now load the hash table into the chip (if we are using it) */
|
|
for (i = 0; i < 16; i++) {
|
|
bus_space_write_4(t, h,
|
|
GEM_MAC_HASH0 + i * (GEM_MAC_HASH1-GEM_MAC_HASH0),
|
|
hash[i]);
|
|
}
|
|
|
|
chipit:
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CONFIG, v);
|
|
}
|
|
|
|
#if notyet
|
|
|
|
/*
|
|
* gem_power:
|
|
*
|
|
* Power management (suspend/resume) hook.
|
|
*/
|
|
void
|
|
gem_power(why, arg)
|
|
int why;
|
|
void *arg;
|
|
{
|
|
struct gem_softc *sc = arg;
|
|
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
|
|
int s;
|
|
|
|
s = splnet();
|
|
switch (why) {
|
|
case PWR_SUSPEND:
|
|
case PWR_STANDBY:
|
|
gem_stop(ifp, 1);
|
|
if (sc->sc_power != NULL)
|
|
(*sc->sc_power)(sc, why);
|
|
break;
|
|
case PWR_RESUME:
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (sc->sc_power != NULL)
|
|
(*sc->sc_power)(sc, why);
|
|
gem_init(ifp);
|
|
}
|
|
break;
|
|
case PWR_SOFTSUSPEND:
|
|
case PWR_SOFTSTANDBY:
|
|
case PWR_SOFTRESUME:
|
|
break;
|
|
}
|
|
splx(s);
|
|
}
|
|
#endif
|