960df3c8d1
be inserted into ktrace records. The general change has been to replace "struct proc *" with "struct lwp *" in various function prototypes, pass the lwp through and use l_proc to get the process pointer when needed. Bump the kernel rev up to 1.6V
737 lines
17 KiB
C
737 lines
17 KiB
C
/* $NetBSD: dpti.c,v 1.12 2003/06/28 14:21:33 darrenr Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 2001 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Andrew Doran.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 1996-2000 Distributed Processing Technology Corporation
|
|
* Copyright (c) 2000 Adaptec Corporation
|
|
* All rights reserved.
|
|
*
|
|
* TERMS AND CONDITIONS OF USE
|
|
*
|
|
* Redistribution and use in source form, with or without modification, are
|
|
* permitted provided that redistributions of source code must retain the
|
|
* above copyright notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* This software is provided `as is' by Adaptec and any express or implied
|
|
* warranties, including, but not limited to, the implied warranties of
|
|
* merchantability and fitness for a particular purpose, are disclaimed. In no
|
|
* event shall Adaptec be liable for any direct, indirect, incidental, special,
|
|
* exemplary or consequential damages (including, but not limited to,
|
|
* procurement of substitute goods or services; loss of use, data, or profits;
|
|
* or business interruptions) however caused and on any theory of liability,
|
|
* whether in contract, strict liability, or tort (including negligence or
|
|
* otherwise) arising in any way out of the use of this driver software, even
|
|
* if advised of the possibility of such damage.
|
|
*/
|
|
|
|
/*
|
|
* Adaptec/DPT I2O control interface.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: dpti.c,v 1.12 2003/06/28 14:21:33 darrenr Exp $");
|
|
|
|
#include "opt_i2o.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/device.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/ioctl.h>
|
|
|
|
#include <uvm/uvm_extern.h>
|
|
|
|
#include <machine/bus.h>
|
|
#ifdef __i386__
|
|
#include <machine/pio.h>
|
|
#endif
|
|
|
|
#include <dev/i2o/i2o.h>
|
|
#include <dev/i2o/i2odpt.h>
|
|
#include <dev/i2o/iopio.h>
|
|
#include <dev/i2o/iopvar.h>
|
|
#include <dev/i2o/dptivar.h>
|
|
|
|
#ifdef I2ODEBUG
|
|
#define DPRINTF(x) printf x
|
|
#else
|
|
#define DPRINTF(x)
|
|
#endif
|
|
|
|
static struct dpt_sig dpti_sig = {
|
|
{ 'd', 'P', 't', 'S', 'i', 'G'},
|
|
SIG_VERSION,
|
|
#if defined(__i386__)
|
|
PROC_INTEL,
|
|
#elif defined(__powerpc__)
|
|
PROC_POWERPC,
|
|
#elif defined(__alpha__)
|
|
PROC_ALPHA,
|
|
#elif defined(__mips__)
|
|
PROC_MIPS,
|
|
#elif defined(__sparc64__)
|
|
PROC_ULTRASPARC,
|
|
#endif
|
|
#if defined(__i386__)
|
|
PROC_386 | PROC_486 | PROC_PENTIUM | PROC_SEXIUM,
|
|
#else
|
|
0,
|
|
#endif
|
|
FT_HBADRVR,
|
|
0,
|
|
OEM_DPT,
|
|
OS_FREE_BSD, /* XXX */
|
|
CAP_ABOVE16MB,
|
|
DEV_ALL,
|
|
ADF_ALL_SC5,
|
|
0,
|
|
0,
|
|
DPTI_VERSION,
|
|
DPTI_REVISION,
|
|
DPTI_SUBREVISION,
|
|
DPTI_MONTH,
|
|
DPTI_DAY,
|
|
DPTI_YEAR,
|
|
"" /* Will be filled later */
|
|
};
|
|
|
|
void dpti_attach(struct device *, struct device *, void *);
|
|
int dpti_blinkled(struct dpti_softc *);
|
|
int dpti_ctlrinfo(struct dpti_softc *, int, caddr_t);
|
|
int dpti_match(struct device *, struct cfdata *, void *);
|
|
int dpti_passthrough(struct dpti_softc *, caddr_t, struct proc *);
|
|
int dpti_sysinfo(struct dpti_softc *, int, caddr_t);
|
|
|
|
dev_type_open(dptiopen);
|
|
dev_type_ioctl(dptiioctl);
|
|
|
|
const struct cdevsw dpti_cdevsw = {
|
|
dptiopen, nullclose, noread, nowrite, dptiioctl,
|
|
nostop, notty, nopoll, nommap, nokqfilter,
|
|
};
|
|
|
|
extern struct cfdriver dpti_cd;
|
|
|
|
CFATTACH_DECL(dpti, sizeof(struct dpti_softc),
|
|
dpti_match, dpti_attach, NULL, NULL);
|
|
|
|
int
|
|
dpti_match(struct device *parent, struct cfdata *match, void *aux)
|
|
{
|
|
struct iop_attach_args *ia;
|
|
struct iop_softc *iop;
|
|
|
|
ia = aux;
|
|
iop = (struct iop_softc *)parent;
|
|
|
|
if (ia->ia_class != I2O_CLASS_ANY || ia->ia_tid != I2O_TID_IOP)
|
|
return (0);
|
|
|
|
if (le16toh(iop->sc_status.orgid) != I2O_ORG_DPT)
|
|
return (0);
|
|
|
|
return (1);
|
|
}
|
|
|
|
void
|
|
dpti_attach(struct device *parent, struct device *self, void *aux)
|
|
{
|
|
struct iop_softc *iop;
|
|
struct dpti_softc *sc;
|
|
struct {
|
|
struct i2o_param_op_results pr;
|
|
struct i2o_param_read_results prr;
|
|
struct i2o_dpt_param_exec_iop_buffers dib;
|
|
} __attribute__ ((__packed__)) param;
|
|
int rv;
|
|
|
|
sc = (struct dpti_softc *)self;
|
|
iop = (struct iop_softc *)parent;
|
|
|
|
/*
|
|
* Tell the world what we are. The description in the signature
|
|
* must be no more than 46 bytes long (see dptivar.h).
|
|
*/
|
|
printf(": DPT/Adaptec RAID management interface\n");
|
|
sprintf(dpti_sig.dsDescription, "NetBSD %s I2O OSM", osrelease);
|
|
|
|
rv = iop_field_get_all(iop, I2O_TID_IOP,
|
|
I2O_DPT_PARAM_EXEC_IOP_BUFFERS, ¶m,
|
|
sizeof(param), NULL);
|
|
if (rv != 0)
|
|
return;
|
|
|
|
sc->sc_blinkled = le32toh(param.dib.serialoutputoff) + 8;
|
|
}
|
|
|
|
int
|
|
dptiopen(dev_t dev, int flag, int mode, struct lwp *l)
|
|
{
|
|
|
|
if (securelevel > 1)
|
|
return (EPERM);
|
|
if (device_lookup(&dpti_cd, minor(dev)) == NULL)
|
|
return (ENXIO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
dptiioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct lwp *l)
|
|
{
|
|
struct iop_softc *iop;
|
|
struct dpti_softc *sc;
|
|
struct ioctl_pt *pt;
|
|
int i, size, rv, linux;
|
|
|
|
sc = device_lookup(&dpti_cd, minor(dev));
|
|
iop = (struct iop_softc *)sc->sc_dv.dv_parent;
|
|
|
|
if (cmd == PTIOCLINUX) {
|
|
pt = (struct ioctl_pt *)data;
|
|
size = IOCPARM_LEN(pt->com);
|
|
cmd = pt->com & 0xffff;
|
|
data = pt->data;
|
|
linux = 1;
|
|
} else {
|
|
size = IOCPARM_LEN(cmd);
|
|
cmd = cmd & 0xffff;
|
|
linux = 0;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case DPT_SIGNATURE:
|
|
if (size > sizeof(dpti_sig))
|
|
size = sizeof(dpti_sig);
|
|
memcpy(data, &dpti_sig, size);
|
|
return (0);
|
|
|
|
case DPT_CTRLINFO:
|
|
return (dpti_ctlrinfo(sc, size, data));
|
|
|
|
case DPT_SYSINFO:
|
|
return (dpti_sysinfo(sc, size, data));
|
|
|
|
case DPT_BLINKLED:
|
|
if ((i = dpti_blinkled(sc)) == -1)
|
|
i = 0;
|
|
|
|
if (size == 0)
|
|
return (copyout(&i, *(caddr_t *)data, sizeof(i)));
|
|
|
|
*(int *)data = i;
|
|
return (0);
|
|
|
|
case DPT_TARGET_BUSY:
|
|
/*
|
|
* XXX This is here to stop linux_machdepioctl() from
|
|
* whining about an unknown ioctl.
|
|
*/
|
|
return (EIO);
|
|
|
|
case DPT_I2OUSRCMD:
|
|
if (sc->sc_nactive++ >= 2)
|
|
tsleep(&sc->sc_nactive, PRIBIO, "dptislp", 0);
|
|
|
|
if (linux)
|
|
rv = dpti_passthrough(sc, data, l->l_proc);
|
|
else
|
|
rv = dpti_passthrough(sc, *(caddr_t *)data, l->l_proc);
|
|
|
|
sc->sc_nactive--;
|
|
wakeup_one(&sc->sc_nactive);
|
|
return (rv);
|
|
|
|
case DPT_I2ORESETCMD:
|
|
printf("%s: I2ORESETCMD not implemented\n",
|
|
sc->sc_dv.dv_xname);
|
|
return (EOPNOTSUPP);
|
|
|
|
case DPT_I2ORESCANCMD:
|
|
return (iop_reconfigure(iop, 0));
|
|
|
|
default:
|
|
return (ENOTTY);
|
|
}
|
|
}
|
|
|
|
int
|
|
dpti_blinkled(struct dpti_softc *sc)
|
|
{
|
|
struct iop_softc *iop;
|
|
u_int v;
|
|
|
|
iop = (struct iop_softc *)sc->sc_dv.dv_parent;
|
|
|
|
v = bus_space_read_1(iop->sc_iot, iop->sc_ioh, sc->sc_blinkled + 0);
|
|
if (v == 0xbc) {
|
|
v = bus_space_read_1(iop->sc_iot, iop->sc_ioh,
|
|
sc->sc_blinkled + 1);
|
|
return (v);
|
|
}
|
|
|
|
return (-1);
|
|
}
|
|
|
|
int
|
|
dpti_ctlrinfo(struct dpti_softc *sc, int size, caddr_t data)
|
|
{
|
|
struct dpt_ctlrinfo info;
|
|
struct iop_softc *iop;
|
|
int rv, i;
|
|
|
|
iop = (struct iop_softc *)sc->sc_dv.dv_parent;
|
|
|
|
memset(&info, 0, sizeof(info));
|
|
|
|
info.length = sizeof(info) - sizeof(u_int16_t);
|
|
info.drvrHBAnum = sc->sc_dv.dv_unit;
|
|
info.baseAddr = iop->sc_memaddr;
|
|
if ((i = dpti_blinkled(sc)) == -1)
|
|
i = 0;
|
|
info.blinkState = i;
|
|
info.pciBusNum = iop->sc_pcibus;
|
|
info.pciDeviceNum = iop->sc_pcidev;
|
|
info.hbaFlags = FLG_OSD_PCI_VALID | FLG_OSD_DMA | FLG_OSD_I2O;
|
|
info.Interrupt = 10; /* XXX */
|
|
|
|
if (size > sizeof(*data)) {
|
|
memcpy(data, &info, min(sizeof(info), size));
|
|
rv = 0;
|
|
} else
|
|
rv = copyout(&info, *(caddr_t *)data, sizeof(info));
|
|
|
|
return (rv);
|
|
}
|
|
|
|
int
|
|
dpti_sysinfo(struct dpti_softc *sc, int size, caddr_t data)
|
|
{
|
|
struct dpt_sysinfo info;
|
|
int rv;
|
|
#ifdef __i386__
|
|
int i, j;
|
|
#endif
|
|
|
|
memset(&info, 0, sizeof(info));
|
|
|
|
#ifdef __i386__
|
|
outb (0x70, 0x12);
|
|
i = inb(0x71);
|
|
j = i >> 4;
|
|
if (i == 0x0f) {
|
|
outb (0x70, 0x19);
|
|
j = inb (0x71);
|
|
}
|
|
info.drive0CMOS = j;
|
|
|
|
j = i & 0x0f;
|
|
if (i == 0x0f) {
|
|
outb (0x70, 0x1a);
|
|
j = inb (0x71);
|
|
}
|
|
info.drive1CMOS = j;
|
|
info.processorFamily = dpti_sig.dsProcessorFamily;
|
|
|
|
/*
|
|
* Get the conventional memory size from CMOS.
|
|
*/
|
|
outb(0x70, 0x16);
|
|
j = inb(0x71);
|
|
j <<= 8;
|
|
outb(0x70, 0x15);
|
|
j |= inb(0x71);
|
|
info.conventionalMemSize = j;
|
|
|
|
/*
|
|
* Get the extended memory size from CMOS.
|
|
*/
|
|
outb(0x70, 0x31);
|
|
j = inb(0x71);
|
|
j <<= 8;
|
|
outb(0x70, 0x30);
|
|
j |= inb(0x71);
|
|
info.extendedMemSize = j;
|
|
|
|
switch (cpu_class) {
|
|
case CPUCLASS_386:
|
|
info.processorType = PROC_386;
|
|
break;
|
|
case CPUCLASS_486:
|
|
info.processorType = PROC_486;
|
|
break;
|
|
case CPUCLASS_586:
|
|
info.processorType = PROC_PENTIUM;
|
|
break;
|
|
case CPUCLASS_686:
|
|
default:
|
|
info.processorType = PROC_SEXIUM;
|
|
break;
|
|
}
|
|
|
|
info.flags = SI_CMOS_Valid | SI_BusTypeValid |
|
|
SI_MemorySizeValid | SI_NO_SmartROM;
|
|
#else
|
|
info.flags = SI_BusTypeValid | SI_NO_SmartROM;
|
|
#endif
|
|
|
|
info.busType = SI_PCI_BUS;
|
|
|
|
/*
|
|
* Copy out the info structure to the user.
|
|
*/
|
|
if (size > sizeof(*data)) {
|
|
memcpy(data, &info, min(sizeof(info), size));
|
|
rv = 0;
|
|
} else
|
|
rv = copyout(&info, *(caddr_t *)data, sizeof(info));
|
|
|
|
return (rv);
|
|
}
|
|
|
|
int
|
|
dpti_passthrough(struct dpti_softc *sc, caddr_t data, struct proc *proc)
|
|
{
|
|
struct iop_softc *iop;
|
|
struct i2o_msg mh, *mf;
|
|
struct i2o_reply rh;
|
|
struct iop_msg *im;
|
|
struct dpti_ptbuf bufs[IOP_MAX_MSG_XFERS];
|
|
u_int32_t mbtmp[IOP_MAX_MSG_SIZE / sizeof(u_int32_t)];
|
|
u_int32_t rbtmp[IOP_MAX_MSG_SIZE / sizeof(u_int32_t)];
|
|
int rv, msgsize, repsize, sgoff, i, mapped, nbuf, nfrag, j, sz;
|
|
u_int32_t *p, *pmax, *pstart;
|
|
|
|
iop = (struct iop_softc *)sc->sc_dv.dv_parent;
|
|
im = NULL;
|
|
|
|
if ((rv = dpti_blinkled(sc)) != -1) {
|
|
if (rv != 0) {
|
|
printf("%s: adapter blinkled = 0x%02x\n",
|
|
sc->sc_dv.dv_xname, rv);
|
|
return (EIO);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Copy in the message frame header and determine the size of the
|
|
* full message frame.
|
|
*/
|
|
if ((rv = copyin(data, &mh, sizeof(mh))) != 0) {
|
|
DPRINTF(("%s: message copyin failed\n",
|
|
sc->sc_dv.dv_xname));
|
|
return (rv);
|
|
}
|
|
|
|
msgsize = (mh.msgflags >> 14) & ~3;
|
|
if (msgsize < sizeof(mh) || msgsize >= IOP_MAX_MSG_SIZE) {
|
|
DPRINTF(("%s: bad message frame size\n",
|
|
sc->sc_dv.dv_xname));
|
|
return (EINVAL);
|
|
}
|
|
|
|
/*
|
|
* Handle special commands.
|
|
*/
|
|
switch (mh.msgfunc >> 24) {
|
|
case I2O_EXEC_IOP_RESET:
|
|
printf("%s: I2O_EXEC_IOP_RESET not implemented\n",
|
|
sc->sc_dv.dv_xname);
|
|
return (EOPNOTSUPP);
|
|
|
|
case I2O_EXEC_OUTBOUND_INIT:
|
|
printf("%s: I2O_EXEC_OUTBOUND_INIT not implemented\n",
|
|
sc->sc_dv.dv_xname);
|
|
return (EOPNOTSUPP);
|
|
|
|
case I2O_EXEC_SYS_TAB_SET:
|
|
printf("%s: I2O_EXEC_SYS_TAB_SET not implemented\n",
|
|
sc->sc_dv.dv_xname);
|
|
return (EOPNOTSUPP);
|
|
|
|
case I2O_EXEC_STATUS_GET:
|
|
if ((rv = iop_status_get(iop, 0)) == 0)
|
|
rv = copyout(&iop->sc_status, data + msgsize,
|
|
sizeof(iop->sc_status));
|
|
return (rv);
|
|
}
|
|
|
|
/*
|
|
* Copy in the full message frame.
|
|
*/
|
|
if ((rv = copyin(data, mbtmp, msgsize)) != 0) {
|
|
DPRINTF(("%s: full message copyin failed\n",
|
|
sc->sc_dv.dv_xname));
|
|
return (rv);
|
|
}
|
|
|
|
/*
|
|
* Determine the size of the reply frame, and copy it in.
|
|
*/
|
|
if ((rv = copyin(data + msgsize, &rh, sizeof(rh))) != 0) {
|
|
DPRINTF(("%s: reply copyin failed\n",
|
|
sc->sc_dv.dv_xname));
|
|
return (rv);
|
|
}
|
|
|
|
repsize = (rh.msgflags >> 14) & ~3;
|
|
if (repsize < sizeof(rh) || repsize >= IOP_MAX_MSG_SIZE) {
|
|
DPRINTF(("%s: bad reply header size\n",
|
|
sc->sc_dv.dv_xname));
|
|
return (EINVAL);
|
|
}
|
|
|
|
if ((rv = copyin(data + msgsize, rbtmp, repsize)) != 0) {
|
|
DPRINTF(("%s: reply too large\n", sc->sc_dv.dv_xname));
|
|
return (rv);
|
|
}
|
|
|
|
/*
|
|
* If the message has a scatter gather list, it must be comprised of
|
|
* simple elements. If any one transfer contains multiple segments,
|
|
* we allocate a temporary buffer for it; otherwise, the buffer will
|
|
* be mapped directly.
|
|
*/
|
|
if ((sgoff = ((mh.msgflags >> 4) & 15)) != 0) {
|
|
if ((sgoff + 2) > (msgsize >> 2)) {
|
|
DPRINTF(("%s: invalid message size fields\n",
|
|
sc->sc_dv.dv_xname));
|
|
return (EINVAL);
|
|
}
|
|
|
|
memset(bufs, 0, sizeof(bufs));
|
|
} else
|
|
nbuf = -1;
|
|
|
|
rv = EINVAL;
|
|
|
|
if (sgoff != 0) {
|
|
p = mbtmp + sgoff;
|
|
pmax = mbtmp + (msgsize >> 2) - 2;
|
|
|
|
for (nbuf = 0; nbuf < IOP_MAX_MSG_XFERS; nbuf++, p += 2) {
|
|
if (p > pmax) {
|
|
DPRINTF(("%s: invalid SGL (1)\n",
|
|
sc->sc_dv.dv_xname));
|
|
goto bad;
|
|
}
|
|
|
|
if ((p[0] & 0x30000000) != I2O_SGL_SIMPLE) {
|
|
DPRINTF(("%s: invalid SGL (2)\n",
|
|
sc->sc_dv.dv_xname));
|
|
goto bad;
|
|
}
|
|
|
|
bufs[nbuf].db_out = (p[0] & I2O_SGL_DATA_OUT) != 0;
|
|
bufs[nbuf].db_ptr = NULL;
|
|
|
|
if ((p[0] & I2O_SGL_END_BUFFER) != 0) {
|
|
if ((p[0] & 0x00ffffff) > IOP_MAX_XFER) {
|
|
DPRINTF(("%s: buffer too large\n",
|
|
sc->sc_dv.dv_xname));
|
|
goto bad;
|
|
}
|
|
|
|
bufs[nbuf].db_ptr = (caddr_t)p[1];
|
|
bufs[nbuf].db_proc = proc;
|
|
bufs[nbuf].db_size = p[0] & 0x00ffffff;
|
|
|
|
if ((p[0] & I2O_SGL_END) != 0)
|
|
break;
|
|
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* The buffer has multiple segments. Determine the
|
|
* total size.
|
|
*/
|
|
nfrag = 0;
|
|
sz = 0;
|
|
for (pstart = p; p <= pmax; p += 2) {
|
|
if (nfrag == DPTI_MAX_SEGS) {
|
|
DPRINTF(("%s: too many segments\n",
|
|
sc->sc_dv.dv_xname));
|
|
goto bad;
|
|
}
|
|
|
|
bufs[nbuf].db_frags[nfrag].iov_len =
|
|
p[0] & 0x00ffffff;
|
|
bufs[nbuf].db_frags[nfrag].iov_base =
|
|
(void *)p[1];
|
|
|
|
sz += p[0] & 0x00ffffff;
|
|
nfrag++;
|
|
|
|
if ((p[0] & I2O_SGL_END) != 0) {
|
|
if ((p[0] & I2O_SGL_END_BUFFER) == 0) {
|
|
DPRINTF((
|
|
"%s: invalid SGL (3)\n",
|
|
sc->sc_dv.dv_xname));
|
|
goto bad;
|
|
}
|
|
break;
|
|
}
|
|
if ((p[0] & I2O_SGL_END_BUFFER) != 0)
|
|
break;
|
|
}
|
|
bufs[nbuf].db_nfrag = nfrag;
|
|
|
|
if (p > pmax) {
|
|
DPRINTF(("%s: invalid SGL (4)\n",
|
|
sc->sc_dv.dv_xname));
|
|
goto bad;
|
|
}
|
|
|
|
if (sz > IOP_MAX_XFER) {
|
|
DPRINTF(("%s: buffer too large\n",
|
|
sc->sc_dv.dv_xname));
|
|
goto bad;
|
|
}
|
|
|
|
bufs[nbuf].db_size = sz;
|
|
bufs[nbuf].db_ptr = malloc(sz, M_DEVBUF, M_WAITOK);
|
|
if (bufs[nbuf].db_ptr == NULL) {
|
|
DPRINTF(("%s: allocation failure\n",
|
|
sc->sc_dv.dv_xname));
|
|
rv = ENOMEM;
|
|
goto bad;
|
|
}
|
|
|
|
for (i = 0, sz = 0; i < bufs[nbuf].db_nfrag; i++) {
|
|
rv = copyin(bufs[nbuf].db_frags[i].iov_base,
|
|
bufs[nbuf].db_ptr + sz,
|
|
bufs[nbuf].db_frags[i].iov_len);
|
|
if (rv != 0) {
|
|
DPRINTF(("%s: frag copyin\n",
|
|
sc->sc_dv.dv_xname));
|
|
goto bad;
|
|
}
|
|
sz += bufs[nbuf].db_frags[i].iov_len;
|
|
}
|
|
|
|
if ((p[0] & I2O_SGL_END) != 0)
|
|
break;
|
|
}
|
|
|
|
if (nbuf == IOP_MAX_MSG_XFERS) {
|
|
DPRINTF(("%s: too many transfers\n",
|
|
sc->sc_dv.dv_xname));
|
|
goto bad;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Allocate a wrapper, and adjust the message header fields to
|
|
* indicate that no scatter-gather list is currently present.
|
|
*/
|
|
mapped = 0;
|
|
|
|
im = iop_msg_alloc(iop, IM_WAIT | IM_NOSTATUS);
|
|
im->im_rb = (struct i2o_reply *)rbtmp;
|
|
mf = (struct i2o_msg *)mbtmp;
|
|
mf->msgictx = IOP_ICTX;
|
|
mf->msgtctx = im->im_tctx;
|
|
|
|
if (sgoff != 0)
|
|
mf->msgflags = (mf->msgflags & 0xff0f) | (sgoff << 16);
|
|
|
|
/*
|
|
* Map the data transfer(s).
|
|
*/
|
|
for (i = 0; i <= nbuf; i++) {
|
|
rv = iop_msg_map(iop, im, mbtmp, bufs[i].db_ptr,
|
|
bufs[i].db_size, bufs[i].db_out, bufs[i].db_proc);
|
|
if (rv != 0) {
|
|
DPRINTF(("%s: msg_map failed, rv = %d\n",
|
|
sc->sc_dv.dv_xname, rv));
|
|
goto bad;
|
|
}
|
|
mapped = 1;
|
|
}
|
|
|
|
/*
|
|
* Start the command and sleep until it completes.
|
|
*/
|
|
if ((rv = iop_msg_post(iop, im, mbtmp, 5*60*1000)) != 0)
|
|
goto bad;
|
|
|
|
/*
|
|
* Copy out the reply frame.
|
|
*/
|
|
if ((rv = copyout(rbtmp, data + msgsize, repsize)) != 0)
|
|
DPRINTF(("%s: reply copyout() failed\n",
|
|
sc->sc_dv.dv_xname));
|
|
|
|
bad:
|
|
/*
|
|
* Free resources and return to the caller.
|
|
*/
|
|
if (im != NULL) {
|
|
if (mapped)
|
|
iop_msg_unmap(iop, im);
|
|
iop_msg_free(iop, im);
|
|
}
|
|
|
|
for (i = 0; i <= nbuf; i++) {
|
|
if (bufs[i].db_proc != NULL)
|
|
continue;
|
|
|
|
if (!bufs[i].db_out && rv == 0) {
|
|
for (j = 0, sz = 0; j < bufs[i].db_nfrag; j++) {
|
|
rv = copyout(bufs[i].db_ptr + sz,
|
|
bufs[i].db_frags[j].iov_base,
|
|
bufs[i].db_frags[j].iov_len);
|
|
if (rv != 0)
|
|
break;
|
|
sz += bufs[i].db_frags[j].iov_len;
|
|
}
|
|
}
|
|
|
|
if (bufs[i].db_ptr != NULL)
|
|
free(bufs[i].db_ptr, M_DEVBUF);
|
|
}
|
|
|
|
return (rv);
|
|
}
|