276 lines
9.6 KiB
Plaintext
276 lines
9.6 KiB
Plaintext
# $NetBSD: ARCTIC,v 1.54 2010/05/08 22:16:26 mrg Exp $
|
|
# $OpenBSD: ARCTIC,v 1.12 1999/08/29 12:14:03 niklas Exp $
|
|
#
|
|
# configuration file for DeskStation
|
|
#
|
|
|
|
include "arch/arc/conf/std.arc"
|
|
|
|
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
maxusers 32 # estimated number of users
|
|
|
|
# Platform support
|
|
options PLATFORM_DESKTECH_ARCSTATION_I # DeskStation rPC44
|
|
options PLATFORM_DESKTECH_TYNE # DeskStation Tyne
|
|
|
|
# Misc. arc-specific options
|
|
options PCCONS_FORCE_WORD # Max out at 16bit accesses to the
|
|
# VGA memory
|
|
|
|
# Standard system options
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
options NTP # NTP phase/frequency locked loop
|
|
|
|
options KTRACE # system call tracing via ktrace(1)
|
|
|
|
options SYSVMSG # System V-like message queues
|
|
options SYSVSEM # System V-like semaphores
|
|
options SYSVSHM # System V-like memory sharing
|
|
|
|
options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
|
|
|
|
# Diagnostic/debugging support options
|
|
options DIAGNOSTIC # cheap kernel consistency checks
|
|
#options DEBUG # expensive debugging checks/support
|
|
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
|
options DDB # in-kernel debugger
|
|
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
|
|
#options KGDB # remote gdb
|
|
#options KGDB_DEVRATE=19200 # kernel gdb port rate (default 9600)
|
|
#options KGDB_DEV="17*256+0" # device for kernel gdb
|
|
#makeoptions DEBUG="-g" # compile full symbol table
|
|
|
|
# Compatibility options
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
options COMPAT_10 # NetBSD 1.0,
|
|
options COMPAT_11 # NetBSD 1.1,
|
|
options COMPAT_12 # NetBSD 1.2,
|
|
options COMPAT_13 # NetBSD 1.3,
|
|
options COMPAT_14 # NetBSD 1.4,
|
|
options COMPAT_15 # NetBSD 1.5,
|
|
options COMPAT_16 # NetBSD 1.6,
|
|
options COMPAT_20 # NetBSD 2.0,
|
|
options COMPAT_30 # NetBSD 3.0,
|
|
options COMPAT_40 # NetBSD 4.0 compatibility.
|
|
options COMPAT_43 # and 4.3BSD
|
|
options COMPAT_386BSD_MBRPART # recognize old partition ID
|
|
|
|
# mipsel specific
|
|
options COMPAT_ULTRIX # Ultrix binary compatibility
|
|
options EXEC_ECOFF # Ultrix RISC binaries are ECOFF format
|
|
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
|
|
|
|
# File systems
|
|
file-system FFS # fast filesystem
|
|
#file-system EXT2FS # second extended file system (linux)
|
|
#file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NTFS # Windows/NT file system (experimental)
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # MS-DOS file system
|
|
file-system NFS # Network File System client
|
|
file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
#file-system NULLFS # loopback file system
|
|
#file-system OVERLAY # overlay file system
|
|
file-system PROCFS # /proc
|
|
#file-system UMAPFS # NULLFS + uid and gid remapping
|
|
#file-system UNION # union file system
|
|
#file-system CODA # Coda File System; also needs vcoda (below)
|
|
file-system PTYFS # /dev/pts/N support
|
|
|
|
# File system options
|
|
options QUOTA # FFS quotas
|
|
#options FFS_EI # FFS Endian Independent support
|
|
options NFSSERVER # Network File System server
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
# immutable) behave as system flags.
|
|
#options FFS_NO_SNAPSHOT # No FFS snapshot support
|
|
|
|
# Networking options
|
|
#options GATEWAY # IP packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # IP multicast routing
|
|
#options PIM # Protocol Independent Multicast
|
|
#options ISO,TPIP # OSI networking
|
|
#options EON # OSI tunneling over IP
|
|
options NETATALK # AppleTalk networking protocols
|
|
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
options PPP_DEFLATE # Deflate compression support for PPP
|
|
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
options PFIL_HOOKS # pfil(9) packet filter hooks
|
|
options IPFILTER_LOG # ipmon(8) log support
|
|
options IPFILTER_LOOKUP # ippool(8) support
|
|
options IPFILTER_COMPAT # Compat for IP-Filter
|
|
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
# These options enable verbose messages for several subsystems.
|
|
# Warning, these may compile large string tables into the kernel!
|
|
#options EISAVERBOSE # verbose EISA device autoconfig messages
|
|
#options PCIVERBOSE # verbose PCI device autoconfig messages
|
|
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
|
options SCSIVERBOSE # human readable SCSI error messages
|
|
|
|
# wscons terminal emulation
|
|
options WSEMUL_VT100 # VT100 emulation
|
|
|
|
# Kernel root file system and dump configuration.
|
|
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
|
|
config netbsd root on ? type ?
|
|
|
|
#
|
|
# Device configuration
|
|
#
|
|
|
|
mainbus0 at root
|
|
cpu* at mainbus0
|
|
|
|
#### ISA bus devices
|
|
|
|
# PLATFORM_DESKTECH_ARCSTATION_I
|
|
arcsisabr* at mainbus0 # DeskStation rPC44 ISA host bridge.
|
|
isa* at arcsisabr?
|
|
|
|
# PLATFORM_DESKTECH_TYNE
|
|
tyneisabr* at mainbus0 # DeskStation Tyne ISA host bridge.
|
|
isa* at tyneisabr?
|
|
|
|
#isadma0 at isa?
|
|
|
|
timer0 at isa? port 0x40 irq 0
|
|
mcclock0 at isa? port 0x70
|
|
|
|
pc0 at isa? irq 1 # generic PC console device
|
|
opms0 at isa? irq 12 # PS/2 auxiliary port mouse
|
|
#vga0 at isa?
|
|
#pckbc0 at isa? # PC keyboard controller
|
|
com0 at isa? port 0x3f8 irq 4
|
|
com1 at isa? port 0x2f8 irq 3
|
|
com2 at isa? port 0x3e8 irq 4
|
|
com3 at isa? port 0x2e8 irq 3
|
|
ast0 at isa? port 0x1a0 irq 3 # AST 4-port serial cards
|
|
com* at ast? slave ?
|
|
|
|
# Joystick driver. Probe is a little strange; add only if you have one.
|
|
joy0 at isa? port 0x201
|
|
|
|
# ISA ST506, ESDI, and IDE controllers
|
|
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
|
|
# fall back to 16bits I/O if 32bits I/O are not functional).
|
|
# Some controllers pass the initial 32bit test, but will fail later.
|
|
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
|
|
wdc1 at isa? port 0x170 irq 15 flags 0x00
|
|
#wdc* at isapnp?
|
|
|
|
# ISA parallel printer interfaces
|
|
lpt0 at isa? port 0x378 irq 7
|
|
|
|
# ISA network interfaces
|
|
ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
|
|
ep0 at isa? port ? irq ? # 3C509 ethernet cards
|
|
ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
|
|
ne1 at isa? port 0x300 irq 10
|
|
#ne* at isapnp? # NE[12]000 PnP ethernet
|
|
we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
|
|
we1 at isa? port 0x300 iomem 0xcc000 irq 10
|
|
|
|
#aha0 at isa? port 0x330 irq ? drq ? # Adaptec 154[02] SCSI
|
|
#aha1 at isa? port 0x334 irq ? drq ? # Adaptec 154[02] SCSI
|
|
btl0 at isa? port 0x330 irq ? drq ?
|
|
#wds0 at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000 SCSI
|
|
#wds1 at isa? port 0x358 irq 11 drq 5
|
|
|
|
# SCSI bus support
|
|
scsibus* at scsi?
|
|
|
|
#### SCSI bus devices
|
|
|
|
sd* at scsibus? target ? lun ?
|
|
st* at scsibus? target ? lun ?
|
|
cd* at scsibus? target ? lun ?
|
|
ch* at scsibus? target ? lun ?
|
|
ss* at scsibus? target ? lun ?
|
|
uk* at scsibus? target ? lun ?
|
|
|
|
# ATA (IDE) bus support
|
|
atabus* at ata?
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
wd* at atabus? drive ? flags 0x0000
|
|
|
|
# ATAPI bus support
|
|
atapibus* at atapi?
|
|
|
|
#### ATAPI bus devices
|
|
|
|
# flags have the same meaning as for IDE drives.
|
|
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
|
|
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
|
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
|
|
|
|
#### Workstation Console attachments
|
|
|
|
#wsdisplay* at vga?
|
|
#wsdisplay* at tga?
|
|
#pckbd* at pckbc? # PC keyboard (kbd port)
|
|
#wskbd* at pckbd?
|
|
#pms* at pckbc? # PS/2-style mouse (aux port)
|
|
#wsmouse* at pms?
|
|
|
|
#### Pseudo devices
|
|
|
|
# disk/mass storage pseudo-devices
|
|
pseudo-device ccd 4 # concatenated/striped disk devices
|
|
#pseudo-device raid 4 # RAIDframe disk driver
|
|
#pseudo-device fss # file system snapshot device
|
|
pseudo-device md 1 # memory disk device (ramdisk)
|
|
pseudo-device vnd # disk-like interface to files
|
|
|
|
# network pseudo-devices
|
|
pseudo-device bpfilter # Berkeley packet filter
|
|
pseudo-device ipfilter # IP filter (firewall) and NAT
|
|
pseudo-device loop 1 # network loopback
|
|
pseudo-device ppp # Point-to-Point Protocol
|
|
pseudo-device sl # Serial Line IP
|
|
#pseudo-device strip # Starmode Radio IP (Metricom)
|
|
pseudo-device tun # network tunneling over tty
|
|
#pseudo-device gre # generic L3 over IP tunnel
|
|
pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith # IPv[46] tcp relay translation i/f
|
|
pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty # pseudo-terminals
|
|
#pseudo-device sequencer 1 # MIDI sequencer
|
|
# rnd works; RND_COM does not on port arc yet.
|
|
pseudo-device rnd # /dev/random and in-kernel generator
|
|
#options RND_COM # use "com" randomness as well (BROKEN)
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
|
|
# a pseudo device needed for Coda # also needs CODA (above)
|
|
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
|
|
|
# mouse & keyboard multiplexor pseudo-devices
|
|
#pseudo-device wsmux
|