NetBSD/sys/arch/hpcmips/dev/mq200priv.h

157 lines
4.9 KiB
C

/* $NetBSD: mq200priv.h,v 1.2 2003/12/27 05:47:54 takemura Exp $ */
/*-
* Copyright (c) 2001 TAKEMURA Shin
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
struct mq200_crt_param {
u_int16_t width, height, clock;
u_int16_t hdtotal;
u_int16_t vdtotal;
u_int16_t hsstart, hsend;
u_int16_t vsstart, vsend;
u_int32_t opt;
};
#define MQ200_CRT_640x480_60Hz 0
#define MQ200_CRT_800x600_60Hz 1
#define MQ200_CRT_1024x768_60Hz 2
struct mq200_clock_setting {
u_int8_t mem, ge, gc[2];
int pll1, pll2, pll3;
};
struct mq200_md_param {
platid_t *md_platform;
short md_fp_width, md_fp_height;
int md_baseclock;
int md_flags;
#define MQ200_MD_HAVECRT (1<<0)
#define MQ200_MD_HAVEFP (1<<1)
u_int32_t *md_init_ops;
const struct mq200_clock_setting *md_clock_settings;
u_int32_t md_init_dcmisc;
u_int32_t md_init_pmc;
u_int32_t md_init_mm01;
};
extern struct mq200_crt_param mq200_crt_params[];
extern int mq200_crt_nparams;
extern char *mq200_clknames[];
int mq200_pllparam(int reqout, u_int32_t *res);
void mq200_set_pll(struct mq200_softc *, int, int);
void mq200_setup_regctx(struct mq200_softc *sc);
void mq200_setup(struct mq200_softc *sc);
void mq200_win_enable(struct mq200_softc *sc, int gc,
u_int32_t depth, u_int32_t start,
int width, int height, int stride);
void mq200_win_disable(struct mq200_softc *sc, int gc);
void mq200_setupmd(struct mq200_softc *sc);
void mq200_mdsetup(struct mq200_softc *sc);
void mq200_dump_gc(struct mq200_softc *sc, int gc);
void mq200_dump_fp(struct mq200_softc *sc);
void mq200_dump_dc(struct mq200_softc *sc);
void mq200_dump_pll(struct mq200_softc *sc);
void mq200_dump_all(struct mq200_softc *sc);
char* mq200_regname(struct mq200_softc *sc, int offset, char *buf, int size);
#ifdef MQ200_DEBUG
#ifndef MQ200DEBUG_CONF
#define MQ200DEBUG_CONF 0
#endif
extern int mq200_debug;
#define DPRINTF(fmt, args...) do { if (mq200_debug) printf("mq200: " fmt, ##args); } while(0)
#define VPRINTF(fmt, args...) do { if (bootverbose || mq200_debug) printf("mq200: " fmt, ##args); } while(0)
#else
#define DPRINTF(fmt, args...) do { } while (0)
#define VPRINTF(fmt, args...) do { if (bootverbose) printf("mq200: " fmt, ##args); } while(0)
#endif
/*
* register access wrappers
*/
static inline void
mq200_writex(struct mq200_softc *sc, int offset, u_int32_t data)
{
#ifdef _KERNEL
bus_space_write_4(sc->sc_iot, sc->sc_ioh, offset, data);
#else
*(volatile unsigned long*)(sc->sc_baseaddr + offset) = data;
#endif
}
#ifdef MQ200_DEBUG
void
mq200_write(struct mq200_softc *sc, int offset, u_int32_t data);
#else
static inline void
mq200_write(struct mq200_softc *sc, int offset, u_int32_t data)
{
mq200_writex(sc, offset, data);
}
#endif /* MQ200_DEBUG */
static inline void
mq200_write2(struct mq200_softc *sc, struct mq200_regctx *reg, u_int32_t data)
{
reg->val = data;
mq200_writex(sc, reg->offset, reg->val);
}
static inline u_int32_t
mq200_read(struct mq200_softc *sc, int offset)
{
#ifdef _KERNEL
return bus_space_read_4(sc->sc_iot, sc->sc_ioh, offset);
#else
return *(volatile unsigned long*)(sc->sc_baseaddr + offset);
#endif
}
static inline void
mq200_mod(struct mq200_softc *sc, struct mq200_regctx *reg, u_int32_t mask, u_int32_t data)
{
reg->val &= ~mask;
reg->val |= data;
mq200_writex(sc, reg->offset, reg->val);
}
static inline void
mq200_on(struct mq200_softc *sc, struct mq200_regctx *reg, unsigned long data)
{
mq200_mod(sc, reg, data, data);
}
static inline void
mq200_off(struct mq200_softc *sc, struct mq200_regctx *reg, unsigned long data)
{
mq200_mod(sc, reg, data, 0);
}