NetBSD/usr.bin/tset/set.c
roy 258cf0abec Add capfile(5) to describe the termcap format.
Adjust various man pages and other documentation to point to capfile(5)
instead of termcap(5).
Remove getcap(3) as curses hasn't been building it for a long time.
Punt wrterm.c as tset no longer uses it.
2012-04-21 12:27:24 +00:00

273 lines
6.7 KiB
C

/* $NetBSD: set.c,v 1.17 2012/04/21 12:27:30 roy Exp $ */
/*-
* Copyright (c) 1991, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__RCSID("$NetBSD: set.c,v 1.17 2012/04/21 12:27:30 roy Exp $");
#include <err.h>
#include <stdio.h>
#include <term.h>
#include <termios.h>
#include <unistd.h>
#include "extern.h"
#define CHK(val, dft) (val <= 0 ? dft : val)
static int set_tabs(void);
/*
* Reset the terminal mode bits to a sensible state. Very useful after
* a child program dies in raw mode.
*/
void
reset_mode(void)
{
tcgetattr(STDERR_FILENO, &mode);
#if defined(VDISCARD) && defined(CDISCARD)
mode.c_cc[VDISCARD] = CHK(mode.c_cc[VDISCARD], CDISCARD);
#endif
mode.c_cc[VEOF] = CHK(mode.c_cc[VEOF], CEOF);
mode.c_cc[VERASE] = CHK(mode.c_cc[VERASE], CERASE);
#if defined(VFLUSH) && defined(CFLUSH)
mode.c_cc[VFLUSH] = CHK(mode.c_cc[VFLUSH], CFLUSH);
#endif
mode.c_cc[VINTR] = CHK(mode.c_cc[VINTR], CINTR);
mode.c_cc[VKILL] = CHK(mode.c_cc[VKILL], CKILL);
#if defined(VLNEXT) && defined(CLNEXT)
mode.c_cc[VLNEXT] = CHK(mode.c_cc[VLNEXT], CLNEXT);
#endif
mode.c_cc[VQUIT] = CHK(mode.c_cc[VQUIT], CQUIT);
#if defined(VREPRINT) && defined(CRPRNT)
mode.c_cc[VREPRINT] = CHK(mode.c_cc[VREPRINT], CRPRNT);
#endif
mode.c_cc[VSTART] = CHK(mode.c_cc[VSTART], CSTART);
mode.c_cc[VSTOP] = CHK(mode.c_cc[VSTOP], CSTOP);
mode.c_cc[VSUSP] = CHK(mode.c_cc[VSUSP], CSUSP);
#if defined(VWERASE) && defined(CWERASE)
mode.c_cc[VWERASE] = CHK(mode.c_cc[VWERASE], CWERASE);
#endif
mode.c_iflag &= ~(IGNBRK | PARMRK | INPCK | ISTRIP | INLCR | IGNCR
#ifdef IUCLC
| IUCLC
#endif
#ifdef IXANY
| IXANY
#endif
| IXOFF);
mode.c_iflag |= (BRKINT | IGNPAR | ICRNL | IXON
#ifdef IMAXBEL
| IMAXBEL
#endif
);
mode.c_oflag &= ~(0
#ifdef OLCUC
| OLCUC
#endif
#ifdef OCRNL
| OCRNL
#endif
#ifdef ONOCR
| ONOCR
#endif
#ifdef ONLRET
| ONLRET
#endif
#ifdef OFILL
| OFILL
#endif
#ifdef OFDEL
| OFDEL
#endif
#ifdef NLDLY
| NLDLY | CRDLY | TABDLY | BSDLY | VTDLY | FFDLY
#endif
);
mode.c_oflag |= (OPOST
#ifdef ONLCR
| ONLCR
#endif
);
mode.c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD);
mode.c_cflag |= (CS8 | CREAD);
mode.c_lflag &= ~(ECHONL | NOFLSH | TOSTOP
#ifdef ECHOPTR
| ECHOPRT
#endif
#ifdef XCASE
| XCASE
#endif
);
mode.c_lflag |= (ISIG | ICANON | ECHO | ECHOE | ECHOK
#ifdef ECHOCTL
| ECHOCTL
#endif
#ifdef ECHOKE
| ECHOKE
#endif
);
tcsetattr(STDERR_FILENO, TCSADRAIN, &mode);
}
/*
* Determine the erase, interrupt, and kill characters from the terminfo
* entry and command line and update their values in 'mode'.
*/
void
set_control_chars(int erasechar, int intrchar, int killchar)
{
if (mode.c_cc[VERASE] == 0 || erasechar != 0) {
if (erasechar == 0) {
if (over_strike &&
key_backspace != NULL &&
key_backspace[1] == '\0')
mode.c_cc[VERASE] = key_backspace[1];
else
mode.c_cc[VERASE] = CERASE;
} else
mode.c_cc[VERASE] = erasechar;
}
if (mode.c_cc[VINTR] == 0 || intrchar != 0)
mode.c_cc[VINTR] = intrchar ? intrchar : CINTR;
if (mode.c_cc[VKILL] == 0 || killchar != 0)
mode.c_cc[VKILL] = killchar ? killchar : CKILL;
}
/*
* Set up various conversions in 'mode', including parity, tabs, returns,
* echo, and case, according to the terminfo entry. If the program we're
* running was named with a leading upper-case character, map external
* uppercase to internal lowercase.
*/
void
set_conversions(int usingupper)
{
#ifdef ONLCR
mode.c_oflag |= ONLCR;
#endif
mode.c_iflag |= ICRNL;
mode.c_lflag |= ECHO;
mode.c_oflag |= OXTABS;
if (newline != NULL && newline[0] == '\n' && !newline[1]) { /* Newline, not linefeed. */
#ifdef ONLCR
mode.c_oflag &= ~ONLCR;
#endif
mode.c_iflag &= ~ICRNL;
}
if (tab) /* Print tabs. */
mode.c_oflag &= ~OXTABS;
mode.c_lflag |= (ECHOE | ECHOK);
}
/* Output startup string. */
void
set_init(void)
{
const char *bp;
int settle;
#ifdef TAB3
if (oldmode.c_oflag & (TAB3 | ONLCR | OCRNL | ONLRET)) {
oldmode.c_oflag &= (TAB3 | ONLCR | OCRNL | ONLRET);
tcsetattr(STDERR_FILENO, TCSADRAIN, &oldmode);
}
#endif
settle = set_tabs();
if (isreset) {
if (reset_1string) {
tputs(reset_1string, 0, outc);
settle = 1;
}
if (reset_2string) {
tputs(reset_2string, 0, outc);
settle = 1;
}
if ((bp = reset_file) || (bp = init_file)) {
tset_cat(bp);
settle = 1;
}
}
if (settle) {
(void)putc('\r', stderr);
(void)fflush(stderr);
(void)sleep(1); /* Settle the terminal. */
}
}
/*
* Set the hardware tabs on the terminal, using the ct (clear all tabs),
* st (set one tab) and ch (horizontal cursor addressing) capabilities.
* This is done before if and is, so they can patch in case we blow this.
* Return nonzero if we set any tab stops, zero if not.
*/
static int
set_tabs(void)
{
int c;
char *out;
if (set_tab) {
if (clear_all_tabs) {
(void)putc('\r', stderr); /* Force to left margin. */
tputs(clear_all_tabs, 0, outc);
}
for (c = 8; c < ncolumns; c += 8) {
if (column_address)
out = tiparm(column_address, c);
else
out = NULL;
if (out)
tputs(out, 1, outc);
else
(void)fprintf(stderr, "%s", " ");
/* Set the tab. */
tputs(set_tab, 0, outc);
}
putc('\r', stderr);
return (1);
}
return (0);
}