245 lines
11 KiB
C
245 lines
11 KiB
C
/* $NetBSD: z8536reg.h,v 1.2 2008/05/23 10:46:53 hauke Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 2008 Hauke Fath
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Zilog Z8536 CIO (Counter/Timer and Parallel I/O Unit)
|
|
* Register Definitions
|
|
*
|
|
* The CIO has four registers: One control register, and three data
|
|
* registers for ports A/B/C. To set up the CIO through the control
|
|
* register, first write the number of the internal register to it,
|
|
* then access or set the selected register contents. Once selected,
|
|
* an internal register can be polled continuously by reading out the
|
|
* control port.
|
|
*
|
|
* Internal registers are read-writable, except where noted.
|
|
*/
|
|
#define Z8536_IOSIZE 0x04
|
|
|
|
#define Z8536_MICR 0x00 /* Master Interrupt Control Register */
|
|
#define MICR_RESET 0x01 /* Chip Reset */
|
|
#define MICR_RJA 0x02 /* Only z8036 (ZBUS version) */
|
|
#define MICR_CTVIS 0x04 /* CT vector includes status */
|
|
#define MICR_PBVIS 0x08 /* Port B vector includes status */
|
|
#define MICR_PAVIS 0x10 /* Port A vector includes status */
|
|
#define MICR_NV 0x20 /* No Vector (NV) */
|
|
#define MICR_DLC 0x40 /* Disable Lower Chain (DLC) */
|
|
#define MICR_MIE 0x80 /* Master Interrupt Enable (MIE) */
|
|
|
|
#define Z8536_MCCR 0x01 /* Master Configuration Register */
|
|
#define MCCR_CTINDPT 0x00 /* Counter/Timers Independent */
|
|
#define MCCR_CT1GT2 0x01 /* CT 1 /OUTPUT gates CT 2 */
|
|
#define MCCR_CT1TR2 0x02 /* CT 1 /OUTPUT triggers CT 2 */
|
|
#define MCCR_CT1CT2 0x03 /* CT 1 /OUTPUT is CT 2's COUNT */
|
|
#define MCCR_PAE 0x04 /* Port A Enable */
|
|
#define MCCR_PLC 0x08 /* Port Link Control (A/B) */
|
|
#define MCCR_PC_CT3E 0x10 /* Counter/Timer 3 + Port C Enable */
|
|
#define MCCR_CT2E 0x20 /* Counter/Timer 2 Enable */
|
|
#define MCCR_CT1E 0x40 /* Counter/Timer 1 Enable */
|
|
#define MCCR_PBE 0x80 /* Port B Enable */
|
|
|
|
/* Interrupt Vector Registers */
|
|
#define Z8536_IVRA 0x02 /* Port A Interrupt Vector */
|
|
#define Z8536_IVRB 0x03 /* Port B Interrupt Vector */
|
|
#define Z8536_IVRCT 0x04 /* Counter/Timer Interrupt Vector */
|
|
|
|
/* Port C setup */
|
|
#define Z8536_DPPRC 0x05 /* Port C Data Path Polarity */
|
|
#define Z8536_DDRC 0x06 /* Port C Data Direction */
|
|
#define Z8536_SIOCRC 0x07 /* Port C Special I/O Control */
|
|
|
|
#define Z8536_PCSRA 0x08 /* Port A Command and Status */
|
|
#define Z8536_PCSRB 0x09 /* Port B Command and Status */
|
|
|
|
/* Z8536_PCSRA + Z8536_PCSRB command and status bits */
|
|
#define PCSR_IOE 0x01 /* Interrupt on error */
|
|
#define PCSR_PMF 0x02 /* Pattern match flag (RO) */
|
|
#define PCSR_IRF 0x04 /* Input register full (RO) */
|
|
#define PCSR_ORE 0x08 /* Output register empty (RO) */
|
|
#define PCSR_ERR 0x10 /* Interrupt error */
|
|
#define PCSR_IP 0x20 /* Interrupt pending */
|
|
#define PCSR_IE 0x40 /* Interrupt enable */
|
|
#define PCSR_IUS 0x80 /* Interrupt under service */
|
|
/* PCSR{A,B} interrupt bits: IUS/IE/IP */
|
|
#define PCSR_NULL 0x00 /* Null Code */
|
|
#define PCSR_CLR_IP_IUS 0x20 /* Clear IP and IUS */
|
|
#define PCSR_SET_IUS 0x40 /* Set Interrupt Under Service */
|
|
#define PCSR_CLR_IUS 0x60 /* Clear Interrupt Under Service */
|
|
#define PCSR_SET_IP 0x80 /* Set Interrupt Pending */
|
|
#define PCSR_CLR_IP 0xA0 /* Clear Interrupt Pending */
|
|
#define PCSR_SET_IE 0xC0 /* Set Interrupt Enable */
|
|
#define PCSR_CLR_IE 0xE0 /* Clear Interrupt Enable */
|
|
|
|
/* Counter/Timer 1..3 Command and Status Registers */
|
|
#define Z8536_CTCSR1 0x0A /* CT 1 Command and Status */
|
|
#define Z8536_CTCSR2 0x0B /* CT 2 Command and Status */
|
|
#define Z8536_CTCSR3 0x0C /* CT 3 Command and Status */
|
|
|
|
/* CTCSR setup bits */
|
|
#define CTCS_CIP 0x01 /* Count in Progress (RO) */
|
|
#define CTCS_TCB 0x02 /* Trigger Command Bit (WO) */
|
|
#define CTCS_GCB 0x04 /* Gate Command Bit */
|
|
#define CTCS_RCC 0x08 /* Read Counter Control */
|
|
#define CTCS_ERR 0x10 /* Interrupt Error (RO) */
|
|
#define CTCS_IP 0x20 /* Interrupt Pending */
|
|
#define CTCS_IE 0x40 /* Interrupt Enable */
|
|
#define CTCS_IUS 0x80 /* Interrupt Under Service */
|
|
|
|
/* CTCSR interrupt bits: IUS/IE/IP */
|
|
#define CTCS_NULL 0x00 /* Null Code */
|
|
#define CTCS_CLR_IP_IUS 0x20 /* Clear IP and IUS */
|
|
#define CTCS_SET_IUS 0x40 /* Set Interrupt Under Service */
|
|
#define CTCS_CLR_IUS 0x60 /* Clear Interrupt Under Service */
|
|
#define CTCS_SET_IP 0x80 /* Set Interrupt Pending */
|
|
#define CTCS_CLR_IP 0xA0 /* Clear Interrupt Pending */
|
|
#define CTCS_SET_IE 0xC0 /* Set Interrupt Enable */
|
|
#define CTCS_CLR_IE 0xE0 /* Clear Interrupt Enable */
|
|
|
|
/* The port data registers are directly accessible at their own IO address */
|
|
#define Z8536_PDRA 0x0D /* Port A Data Register */
|
|
#define Z8536_PDRB 0x0E /* Port B Data Register */
|
|
#define Z8536_PDRC 0x0F /* Port C Data Register */
|
|
|
|
/* Bytewise access to current count registers (read-only) */
|
|
#define Z8536_CTCCR1_MSB 0x10 /* CT 1 Current Count MSB */
|
|
#define Z8536_CTCCR1_LSB 0x11 /* CT 1 Current Count LSB */
|
|
#define Z8536_CTCCR2_MSB 0x12 /* CT 2 Current Count MSB */
|
|
#define Z8536_CTCCR2_LSB 0x13 /* CT 2 Current Count LSB */
|
|
#define Z8536_CTCCR3_MSB 0x14 /* CT 3 Current Count MSB */
|
|
#define Z8536_CTCCR3_LSB 0x15 /* CT 3 Current Count LSB */
|
|
|
|
/* Bytewise access to time constant registers */
|
|
#define Z8536_CTTCR1_MSB 0x16 /* CT 1 Time Constant MSB */
|
|
#define Z8536_CTTCR1_LSB 0x17 /* CT 1 Time Constant LSB */
|
|
#define Z8536_CTTCR2_MSB 0x18 /* CT 2 Time Constant MSB */
|
|
#define Z8536_CTTCR2_LSB 0x19 /* CT 2 Time Constant LSB */
|
|
#define Z8536_CTTCR3_MSB 0x1A /* CT 3 Time Constant MSB */
|
|
#define Z8536_CTTCR3_LSB 0x1B /* CT 3 Time Constant LSB */
|
|
|
|
/* Counter/Timer Mode specification */
|
|
#define Z8536_CTMSR1 0x1C /* CT 1 Mode Specification */
|
|
#define Z8536_CTMSR2 0x1D /* CT 2 Mode Specification */
|
|
#define Z8536_CTMSR3 0x1E /* CT 3 Mode Specification */
|
|
#define CTMS_DCS_PULSE 0x00 /* Pulse Output */
|
|
#define CTMS_DCS_ONESHOT 0x01 /* One-Shot Output */
|
|
#define CTMS_DCS_SQUARE 0x02 /* Square Wave Output */
|
|
#define CTMS_REB 0x04 /* Retrigger Enable */
|
|
#define CTMS_EGE 0x08 /* External Gate Enable */
|
|
#define CTMS_ETE 0x10 /* External Trigger Enable */
|
|
#define CTMS_ECE 0x20 /* External Count Enable */
|
|
#define CTMS_EOE 0x40 /* External Output Enable */
|
|
#define CTMS_CSC 0x80 /* Continuous / Single Cycle */
|
|
|
|
#define Z8536_CVR 0x1F /* Current Interrupt Vector (RO) */
|
|
|
|
/* Port A specification registers */
|
|
#define Z8536_PMSRA 0x20 /* Port A Mode Specification */
|
|
#define Z8536_PHSRA 0x21 /* Port A Handshake Specification */
|
|
#define Z8536_DPPRA 0x22 /* Port A Data Path Polarity */
|
|
#define Z8536_DDRA 0x23 /* Port A Data Direction */
|
|
#define Z8536_SIOCRA 0x24 /* Port A Special I/O Control */
|
|
#define Z8536_PPRA 0x25 /* Port A Pattern Polarity */
|
|
#define Z8536_PTRA 0x26 /* Port A Pattern Transition */
|
|
#define Z8536_PMRA 0x27 /* Port A Pattern Mask */
|
|
|
|
/* Port B specification registers */
|
|
#define Z8536_PMSRB 0x28 /* Port B Mode Specification */
|
|
#define Z8536_PHSRB 0x29 /* Port B Handshake Specification */
|
|
#define Z8536_DPPRB 0x2A /* Port B Data Path Polarity */
|
|
#define Z8536_DDRB 0x2B /* Port B Data Direction */
|
|
#define Z8536_SIOCRB 0x2C /* Port B Special I/O Control */
|
|
#define Z8536_PPRB 0x2D /* Port B Pattern Polarity */
|
|
#define Z8536_PTRB 0x2E /* Port B Pattern Transition */
|
|
#define Z8536_PMRB 0x2F /* Port B Pattern Mask */
|
|
|
|
/* Bit definitions, common to ports A and B */
|
|
|
|
/* Z8536_PMSRA + Z8536_PMSRB port mode specification bits */
|
|
#define PMSR_LPM 0x01 /* Bit mode: latched */
|
|
#define PMSR_DTE 0x01 /* Hsk mode: deskew timer enable */
|
|
/*
|
|
* PMS1 PMS0 Pattern mode specification
|
|
* 0 0 disable pattern match
|
|
* 0 1 "and" mode, transition-triggered interrupt
|
|
* 1 0 "or" mode, transition-triggered interrupt
|
|
* 1 1 "or-priority encoded vector" mode, level-
|
|
* triggered interrupt (only transparent LPM mode)
|
|
*/
|
|
#define PMSR_PMS0 0x02
|
|
#define PMSR_PMS1 0x04
|
|
#define PMSR_PMS_OFF 0x00 /* Disable pattern match */
|
|
#define PMSR_PMS_AND 0x02 /* "and" mode, transition-triggered */
|
|
#define PMSR_PMS_OR 0x04 /* "or" mode, transition-triggered */
|
|
/*
|
|
* "or-priority encoded vector" mode, level-triggered interrupt
|
|
* (only in transparent LPM mode)
|
|
*/
|
|
#define PMSR_PMS_OR_PEV 0x06
|
|
#define PMSR_IMO 0x08 /* Interrupt on match only */
|
|
#define PMSR_SB 0x10 /* Single buffered mode */
|
|
#define PMSR_ITB 0x20 /* Interrupt on two bytes */
|
|
/*
|
|
* PTS1 PTS0 Port type selects
|
|
* 0 0 bit port
|
|
* 0 1 input port
|
|
* 1 0 output port
|
|
* 1 1 bidirectional port
|
|
*/
|
|
#define PMSR_PTS0 0x40
|
|
#define PMSR_PTS1 0x80
|
|
#define PMSR_PTS_BIT 0x00
|
|
#define PMSR_PTS_IN 0x40
|
|
#define PMSR_PTS_OUT 0x80
|
|
#define PMSR_PTS_BIDI 0xC0
|
|
/*
|
|
* Z8536_PHSRA + Z8536_PHSRB port handshake specification bits
|
|
* Bits 0-2 set deskew timer for output ports
|
|
*
|
|
* RWS2 RWS1 RWS0 Status signals on port C
|
|
* 0 0 0 REQUEST/-WAIT disabled
|
|
* 0 0 1 output -WAIT
|
|
* 0 1 1 input -WAIT
|
|
* 1 0 0 special REQUEST
|
|
* 1 0 1 output REQUEST
|
|
* 1 1 1 input REQUEST
|
|
*/
|
|
#define PHSR_RWS0 0x08
|
|
#define PHSR_RWS1 0x10
|
|
#define PHSR_RWS2 0x20
|
|
/*
|
|
* HTS1 HTS0 Handshake type specification
|
|
* 0 0 interlocked handshake
|
|
* 0 1 strobed handshake
|
|
* 1 0 pulsed handshake
|
|
* 1 1 three-wire-handshake
|
|
*/
|
|
#define PHSR_HTS0 0x40
|
|
#define PHSR_HTS1 0x80
|
|
#define PHSR_HTS_INT 0x00
|
|
#define PHSR_HTS_STR 0x40
|
|
#define PHSR_HTS_PUL 0x80
|
|
#define PHSR_HTS_TWI 0xC0
|