530 lines
14 KiB
C
530 lines
14 KiB
C
/* $NetBSD: sec.c,v 1.10 2008/04/05 20:08:52 cegger Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 2000, 2001, 2006 Ben Harris
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/*
|
|
* sec.c -- driver for Acorn SCSI expansion cards (AKA30, AKA31, AKA32)
|
|
*
|
|
* These cards are documented in:
|
|
* Acorn Archimedes 500 series / Acorn R200 series Technical Reference Manual
|
|
* Published by Acorn Computers Limited
|
|
* ISBN 1 85250 086 7
|
|
* Part number 0486,052
|
|
* Issue 1, November 1990
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: sec.c,v 1.10 2008/04/05 20:08:52 cegger Exp $");
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/buf.h>
|
|
#include <sys/device.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/reboot.h> /* For bootverbose */
|
|
#include <sys/syslog.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <dev/scsipi/scsi_all.h>
|
|
#include <dev/scsipi/scsipi_all.h>
|
|
#include <dev/scsipi/scsiconf.h>
|
|
|
|
#include <sys/bus.h>
|
|
|
|
#include <dev/ic/wd33c93reg.h>
|
|
#include <dev/ic/wd33c93var.h>
|
|
#include <dev/ic/nec71071reg.h>
|
|
|
|
#include <dev/podulebus/podulebus.h>
|
|
#include <dev/podulebus/podules.h>
|
|
#include <dev/podulebus/powerromreg.h>
|
|
#include <dev/podulebus/secreg.h>
|
|
|
|
#include "opt_ddb.h"
|
|
|
|
struct sec_softc {
|
|
struct wd33c93_softc sc_sbic;
|
|
bus_space_tag_t sc_pod_t;
|
|
bus_space_handle_t sc_pod_h;
|
|
bus_space_tag_t sc_mod_t;
|
|
bus_space_handle_t sc_mod_h;
|
|
void *sc_ih;
|
|
struct evcnt sc_intrcnt;
|
|
uint8_t sc_mpr;
|
|
|
|
/* Details of the current DMA transfer */
|
|
bool sc_dmaactive;
|
|
void * sc_dmaaddr;
|
|
int sc_dmaoff;
|
|
size_t sc_dmalen;
|
|
bool sc_dmain;
|
|
/* Details of the current block within the above transfer */
|
|
size_t sc_dmablk;
|
|
};
|
|
|
|
#define SEC_DMABLK 16384
|
|
#define SEC_NBLKS 3
|
|
#define SEC_DMAMODE MODE_TMODE_DMD
|
|
|
|
/* autoconfiguration glue */
|
|
static int sec_match(struct device *, struct cfdata *, void *);
|
|
static void sec_attach(struct device *, struct device *, void *);
|
|
|
|
/* shutdown hook */
|
|
static void sec_shutdown(void *);
|
|
|
|
/* callbacks from MI WD33C93 driver */
|
|
static int sec_dmasetup(struct wd33c93_softc *, void **, size_t *, int,
|
|
size_t *);
|
|
static int sec_dmago(struct wd33c93_softc *);
|
|
static void sec_dmastop(struct wd33c93_softc *);
|
|
static void sec_reset(struct wd33c93_softc *);
|
|
|
|
static int sec_intr(void *);
|
|
static int sec_dmatc(struct sec_softc *sc);
|
|
|
|
void sec_dumpdma(void *arg);
|
|
|
|
CFATTACH_DECL(sec, sizeof(struct sec_softc),
|
|
sec_match, sec_attach, NULL, NULL);
|
|
|
|
static inline void
|
|
sec_setpage(struct sec_softc *sc, int page)
|
|
{
|
|
|
|
sc->sc_mpr = (sc->sc_mpr & ~SEC_MPR_PAGE) | page;
|
|
bus_space_write_1(sc->sc_pod_t, sc->sc_pod_h, SEC_MPR, sc->sc_mpr);
|
|
}
|
|
|
|
static inline void
|
|
sec_cli(struct sec_softc *sc)
|
|
{
|
|
|
|
bus_space_write_1(sc->sc_pod_t, sc->sc_pod_h, SEC_CLRINT, 0);
|
|
}
|
|
|
|
static inline void
|
|
dmac_write(struct sec_softc *sc, int reg, uint8_t val)
|
|
{
|
|
|
|
bus_space_write_1(sc->sc_mod_t, sc->sc_mod_h,
|
|
SEC_DMAC + DMAC(reg), val);
|
|
}
|
|
|
|
static inline uint8_t
|
|
dmac_read(struct sec_softc *sc, int reg)
|
|
{
|
|
|
|
return bus_space_read_1(sc->sc_mod_t, sc->sc_mod_h,
|
|
SEC_DMAC + DMAC(reg));
|
|
}
|
|
|
|
static int
|
|
sec_match(struct device *parent, struct cfdata *cf, void *aux)
|
|
{
|
|
struct podulebus_attach_args *pa = aux;
|
|
|
|
/* Standard ROM, skipping the MCS card that used the same ID. */
|
|
if (pa->pa_product == PODULE_ACORN_SCSI &&
|
|
strncmp(pa->pa_descr, "MCS", 3) != 0)
|
|
return 1;
|
|
|
|
/* PowerROM */
|
|
if (pa->pa_product == PODULE_ALSYSTEMS_SCSI &&
|
|
podulebus_initloader(pa) == 0 &&
|
|
podloader_callloader(pa, 0, 0) == PRID_ACORN_SCSI1)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
sec_attach(struct device *parent, struct device *self, void *aux)
|
|
{
|
|
struct podulebus_attach_args *pa = aux;
|
|
struct sec_softc *sc = device_private(self);
|
|
int i;
|
|
|
|
/* Set up bus spaces */
|
|
sc->sc_pod_t = pa->pa_fast_t;
|
|
bus_space_map(pa->pa_fast_t, pa->pa_fast_base, 0x1000, 0,
|
|
&sc->sc_pod_h);
|
|
sc->sc_mod_t = pa->pa_mod_t;
|
|
bus_space_map(pa->pa_mod_t, pa->pa_mod_base, 0x1000, 0,
|
|
&sc->sc_mod_h);
|
|
|
|
sc->sc_sbic.sc_regt = sc->sc_mod_t;
|
|
bus_space_subregion(sc->sc_mod_t, sc->sc_mod_h, SEC_SBIC,
|
|
0x1000 - SEC_SBIC, &sc->sc_sbic.sc_regh);
|
|
|
|
sc->sc_sbic.sc_id = 7;
|
|
sc->sc_sbic.sc_clkfreq = SEC_CLKFREQ;
|
|
sc->sc_sbic.sc_dmamode = SBIC_CTL_BURST_DMA;
|
|
|
|
sc->sc_sbic.sc_adapter.adapt_request = wd33c93_scsi_request;
|
|
sc->sc_sbic.sc_adapter.adapt_minphys = minphys;
|
|
|
|
sc->sc_sbic.sc_dmasetup = sec_dmasetup;
|
|
sc->sc_sbic.sc_dmago = sec_dmago;
|
|
sc->sc_sbic.sc_dmastop = sec_dmastop;
|
|
sc->sc_sbic.sc_reset = sec_reset;
|
|
|
|
sc->sc_mpr = 0;
|
|
bus_space_write_1(sc->sc_pod_t, sc->sc_pod_h, SEC_MPR, sc->sc_mpr);
|
|
|
|
for (i = 0; i < SEC_NPAGES; i++) {
|
|
sec_setpage(sc, i);
|
|
bus_space_set_region_2(sc->sc_mod_t, sc->sc_mod_h,
|
|
SEC_SRAM, 0, SEC_PAGESIZE / 2);
|
|
}
|
|
|
|
wd33c93_attach(&sc->sc_sbic);
|
|
|
|
evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, NULL,
|
|
device_xname(self), "intr");
|
|
sc->sc_ih = podulebus_irq_establish(pa->pa_ih, IPL_BIO, sec_intr,
|
|
sc, &sc->sc_intrcnt);
|
|
sec_cli(sc);
|
|
sc->sc_mpr |= SEC_MPR_IE;
|
|
bus_space_write_1(sc->sc_pod_t, sc->sc_pod_h, SEC_MPR, sc->sc_mpr);
|
|
shutdownhook_establish(sec_shutdown, sc);
|
|
}
|
|
|
|
/*
|
|
* Before reboot, reset the page register to 0 so that RISC OS can see
|
|
* the podule ROM.
|
|
*/
|
|
static void
|
|
sec_shutdown(void *cookie)
|
|
{
|
|
struct sec_softc *sc = cookie;
|
|
|
|
sec_setpage(sc, 0);
|
|
}
|
|
|
|
static void
|
|
sec_copyin(struct sec_softc *sc, void *dest, int src, size_t size)
|
|
{
|
|
uint16_t tmp, *wptr;
|
|
int cnt, extra_byte;
|
|
|
|
KASSERT(src >= 0);
|
|
KASSERT(src + size <= SEC_MEMSIZE);
|
|
if (src % 2 != 0) {
|
|
/*
|
|
* There's a stray byte at the start. Read the word
|
|
* containing it.
|
|
*/
|
|
sec_setpage(sc, src / SEC_PAGESIZE);
|
|
tmp = bus_space_read_2(sc->sc_mod_t, sc->sc_mod_h,
|
|
SEC_SRAM + (src % SEC_PAGESIZE / 2));
|
|
*(uint8_t *)dest = tmp >> 8;
|
|
dest = ((uint8_t *)dest) + 1;
|
|
src++; size--;
|
|
}
|
|
KASSERT(src % 2 == 0);
|
|
KASSERT(ALIGNED_POINTER(dest, uint16_t));
|
|
wptr = dest;
|
|
extra_byte = size % 2;
|
|
size -= extra_byte;
|
|
while (size > 0) {
|
|
cnt = SEC_PAGESIZE - src % SEC_PAGESIZE;
|
|
if (cnt > size)
|
|
cnt = size;
|
|
sec_setpage(sc, src / SEC_PAGESIZE);
|
|
/* bus ops are in words */
|
|
bus_space_read_region_2(sc->sc_mod_t, sc->sc_mod_h,
|
|
SEC_SRAM + src % SEC_PAGESIZE / 2, wptr, cnt / 2);
|
|
src += cnt;
|
|
wptr += cnt / 2;
|
|
size -= cnt;
|
|
}
|
|
if (extra_byte) {
|
|
sec_setpage(sc, src / SEC_PAGESIZE);
|
|
*(u_int8_t *)wptr =
|
|
bus_space_read_2(sc->sc_mod_t, sc->sc_mod_h,
|
|
SEC_SRAM + src % SEC_PAGESIZE / 2) & 0xff;
|
|
}
|
|
}
|
|
|
|
static void
|
|
sec_copyout(struct sec_softc *sc, const void *src, int dest, size_t size)
|
|
{
|
|
int cnt, extra_byte;
|
|
const uint16_t *wptr;
|
|
uint16_t tmp;
|
|
|
|
KASSERT(dest >= 0);
|
|
KASSERT(dest + size <= SEC_MEMSIZE);
|
|
if (dest % 2 != 0) {
|
|
/*
|
|
* There's a stray byte at the start. Read the word
|
|
* containing it.
|
|
*/
|
|
sec_setpage(sc, dest / SEC_PAGESIZE);
|
|
tmp = bus_space_read_2(sc->sc_mod_t, sc->sc_mod_h,
|
|
SEC_SRAM + (dest % SEC_PAGESIZE / 2));
|
|
tmp &= 0xff;
|
|
tmp |= *(uint8_t const *)src << 8;
|
|
bus_space_write_2(sc->sc_mod_t, sc->sc_mod_h,
|
|
SEC_SRAM + (dest % SEC_PAGESIZE / 2), tmp);
|
|
src = ((uint8_t const *)src) + 1;
|
|
dest++; size--;
|
|
}
|
|
KASSERT(dest % 2 == 0);
|
|
KASSERT(ALIGNED_POINTER(src, uint16_t));
|
|
wptr = src;
|
|
extra_byte = size % 2;
|
|
size -= extra_byte;
|
|
while (size > 0) {
|
|
cnt = SEC_PAGESIZE - dest % SEC_PAGESIZE;
|
|
if (cnt > size)
|
|
cnt = size;
|
|
sec_setpage(sc, dest / SEC_PAGESIZE);
|
|
/* bus ops are in words */
|
|
bus_space_write_region_2(sc->sc_mod_t, sc->sc_mod_h,
|
|
dest % SEC_PAGESIZE / 2, wptr, cnt / 2);
|
|
wptr += cnt / 2;
|
|
dest += cnt;
|
|
size -= cnt;
|
|
}
|
|
if (extra_byte) {
|
|
/*
|
|
* There's a stray byte at the end. Read the word
|
|
* containing it.
|
|
*/
|
|
sec_setpage(sc, dest / SEC_PAGESIZE);
|
|
tmp = bus_space_read_2(sc->sc_mod_t, sc->sc_mod_h,
|
|
SEC_SRAM + (dest % SEC_PAGESIZE / 2));
|
|
tmp &= 0xff00;
|
|
tmp |= *(uint8_t const *)wptr;
|
|
bus_space_write_2(sc->sc_mod_t, sc->sc_mod_h,
|
|
SEC_SRAM + (dest % SEC_PAGESIZE / 2), tmp);
|
|
}
|
|
}
|
|
|
|
static void
|
|
sec_dmablk(struct sec_softc *sc, int blk)
|
|
{
|
|
int off;
|
|
size_t len;
|
|
|
|
KASSERT(blk >= 0);
|
|
KASSERT(blk * SEC_DMABLK < sc->sc_dmalen);
|
|
off = (blk % SEC_NBLKS) * SEC_DMABLK + sc->sc_dmaoff;
|
|
len = MIN(SEC_DMABLK, sc->sc_dmalen - (blk * SEC_DMABLK));
|
|
dmac_write(sc, NEC71071_ADDRLO, off & 0xff);
|
|
dmac_write(sc, NEC71071_ADDRMID, off >> 8);
|
|
dmac_write(sc, NEC71071_ADDRHI, 0);
|
|
/*
|
|
* "Note: The number of DMA transfer cycles is actually the
|
|
* value of the current count register + 1. Therefore, when
|
|
* programming the count register, specify the number of DMA
|
|
* transfers minus one." -- uPD71071 datasheet
|
|
*/
|
|
dmac_write(sc, NEC71071_COUNTLO, (len - 1) & 0xff);
|
|
dmac_write(sc, NEC71071_COUNTHI, (len - 1) >> 8);
|
|
}
|
|
|
|
static void
|
|
sec_copyoutblk(struct sec_softc *sc, int blk)
|
|
{
|
|
int off;
|
|
size_t len;
|
|
|
|
KASSERT(blk >= 0);
|
|
KASSERT(blk * SEC_DMABLK < sc->sc_dmalen);
|
|
KASSERT(!sc->sc_dmain);
|
|
off = (blk % SEC_NBLKS) * SEC_DMABLK + sc->sc_dmaoff;
|
|
len = MIN(SEC_DMABLK, sc->sc_dmalen - (blk * SEC_DMABLK));
|
|
sec_copyout(sc, (char*)sc->sc_dmaaddr + (blk * SEC_DMABLK), off, len);
|
|
}
|
|
|
|
static void
|
|
sec_copyinblk(struct sec_softc *sc, int blk)
|
|
{
|
|
int off;
|
|
size_t len;
|
|
|
|
KASSERT(blk >= 0);
|
|
KASSERT(blk * SEC_DMABLK < sc->sc_dmalen);
|
|
KASSERT(sc->sc_dmain);
|
|
off = (blk % SEC_NBLKS) * SEC_DMABLK + sc->sc_dmaoff;
|
|
len = MIN(SEC_DMABLK, sc->sc_dmalen - (blk * SEC_DMABLK));
|
|
sec_copyin(sc, (char*)sc->sc_dmaaddr + (blk * SEC_DMABLK), off, len);
|
|
}
|
|
|
|
static int
|
|
sec_dmasetup(struct wd33c93_softc *sc_sbic, void **addr, size_t *len,
|
|
int datain, size_t *dmasize)
|
|
{
|
|
struct sec_softc *sc = (struct sec_softc *)sc_sbic;
|
|
uint8_t mode;
|
|
|
|
sc->sc_dmaaddr = *addr;
|
|
sc->sc_dmaoff = ALIGNED_POINTER(*addr, uint16_t) ? 0 : 1;
|
|
sc->sc_dmalen = *len;
|
|
sc->sc_dmain = datain;
|
|
sc->sc_dmablk = 0;
|
|
mode = SEC_DMAMODE | (datain ? MODE_TDIR_IOTM : MODE_TDIR_MTIO);
|
|
/* Program first block into DMAC and queue up second. */
|
|
dmac_write(sc, NEC71071_CHANNEL, 0);
|
|
if (!sc->sc_dmain)
|
|
sec_copyoutblk(sc, 0);
|
|
sec_dmablk(sc, 0);
|
|
/* Mode control register */
|
|
dmac_write(sc, NEC71071_MODE, mode);
|
|
return sc->sc_dmalen;
|
|
}
|
|
|
|
static int
|
|
sec_dmago(struct wd33c93_softc *sc_sbic)
|
|
{
|
|
struct sec_softc *sc = (struct sec_softc *)sc_sbic;
|
|
|
|
dmac_write(sc, NEC71071_MASK, 0xe);
|
|
sc->sc_dmaactive = true;
|
|
if (!sc->sc_dmain && sc->sc_dmalen > SEC_DMABLK)
|
|
sec_copyoutblk(sc, 1);
|
|
return sc->sc_dmalen;
|
|
}
|
|
|
|
static void
|
|
sec_dmastop(struct wd33c93_softc *sc_sbic)
|
|
{
|
|
struct sec_softc *sc = (struct sec_softc *)sc_sbic;
|
|
|
|
dmac_write(sc, NEC71071_MASK, 0xf);
|
|
if (sc->sc_dmaactive && sc->sc_dmain)
|
|
sec_copyinblk(sc, sc->sc_dmablk);
|
|
sc->sc_dmaactive = false;
|
|
}
|
|
|
|
/*
|
|
* Reset the SCSI bus, and incidentally the SBIC and DMAC.
|
|
*/
|
|
static void
|
|
sec_reset(struct wd33c93_softc *sc_sbic)
|
|
{
|
|
struct sec_softc *sc = (struct sec_softc *)sc_sbic;
|
|
uint8_t asr, csr;
|
|
|
|
bus_space_write_1(sc->sc_pod_t, sc->sc_pod_h, SEC_MPR,
|
|
sc->sc_mpr | SEC_MPR_UR);
|
|
DELAY(7);
|
|
bus_space_write_1(sc->sc_pod_t, sc->sc_pod_h, SEC_MPR, sc->sc_mpr);
|
|
/* Wait for and clear the reset-complete interrupt */
|
|
do
|
|
GET_SBIC_asr(sc_sbic, asr);
|
|
while (!(asr & SBIC_ASR_INT));
|
|
GET_SBIC_csr(sc_sbic, csr);
|
|
dmac_write(sc, NEC71071_DCTRL1, DCTRL1_CMP | DCTRL1_RQL);
|
|
dmac_write(sc, NEC71071_DCTRL2, 0);
|
|
sec_cli(sc);
|
|
}
|
|
|
|
static int
|
|
sec_intr(void *arg)
|
|
{
|
|
struct sec_softc *sc = arg;
|
|
u_int8_t isr;
|
|
|
|
isr = bus_space_read_1(sc->sc_pod_t, sc->sc_pod_h, SEC_ISR);
|
|
if (!(isr & SEC_ISR_IRQ))
|
|
return 0;
|
|
if (isr & SEC_ISR_DMAC)
|
|
sec_dmatc(sc);
|
|
if (isr & SEC_ISR_SBIC)
|
|
wd33c93_intr(&sc->sc_sbic);
|
|
return 1;
|
|
}
|
|
|
|
static int
|
|
sec_dmatc(struct sec_softc *sc)
|
|
{
|
|
|
|
sec_cli(sc);
|
|
/* DMAC finished block n-1 and is now working on block n */
|
|
sc->sc_dmablk++;
|
|
if (sc->sc_dmalen > sc->sc_dmablk * SEC_DMABLK) {
|
|
dmac_write(sc, NEC71071_CHANNEL, 0);
|
|
sec_dmablk(sc, sc->sc_dmablk);
|
|
dmac_write(sc, NEC71071_MASK, 0xe);
|
|
if (!sc->sc_dmain &&
|
|
sc->sc_dmalen > (sc->sc_dmablk + 1) * SEC_DMABLK)
|
|
sec_copyoutblk(sc, sc->sc_dmablk + 1);
|
|
} else {
|
|
/* All blocks fully processed. */
|
|
sc->sc_dmaactive = false;
|
|
}
|
|
if (sc->sc_dmain)
|
|
sec_copyinblk(sc, sc->sc_dmablk - 1);
|
|
return 1;
|
|
}
|
|
|
|
#ifdef DDB
|
|
void
|
|
sec_dumpdma(void *arg)
|
|
{
|
|
struct sec_softc *sc = arg;
|
|
|
|
dmac_write(sc, NEC71071_CHANNEL, 0);
|
|
printf("%s: DMA state: cur count %02x%02x cur addr %02x%02x%02x ",
|
|
device_xname(&sc->sc_sbic.sc_dev),
|
|
dmac_read(sc, NEC71071_COUNTHI), dmac_read(sc, NEC71071_COUNTLO),
|
|
dmac_read(sc, NEC71071_ADDRHI), dmac_read(sc, NEC71071_ADDRMID),
|
|
dmac_read(sc, NEC71071_ADDRLO));
|
|
dmac_write(sc, NEC71071_CHANNEL, 0 | CHANNEL_WBASE);
|
|
printf("base count %02x%02x base addr %02x%02x%02x\n",
|
|
dmac_read(sc, NEC71071_COUNTHI), dmac_read(sc, NEC71071_COUNTLO),
|
|
dmac_read(sc, NEC71071_ADDRHI), dmac_read(sc, NEC71071_ADDRMID),
|
|
dmac_read(sc, NEC71071_ADDRLO));
|
|
printf("%s: DMA state: dctrl %1x%02x mode %02x status %02x req %02x "
|
|
"mask %02x\n",
|
|
device_xname(&sc->sc_sbic.sc_dev), dmac_read(sc, NEC71071_DCTRL2),
|
|
dmac_read(sc, NEC71071_DCTRL1), dmac_read(sc, NEC71071_MODE),
|
|
dmac_read(sc, NEC71071_STATUS), dmac_read(sc, NEC71071_REQUEST),
|
|
dmac_read(sc, NEC71071_MASK));
|
|
printf("%s: soft DMA state: %zd@%p%s%d\n", device_xname(&sc->sc_sbic.sc_dev),
|
|
sc->sc_dmalen, sc->sc_dmaaddr, sc->sc_dmain ? "<-" : "->",
|
|
sc->sc_dmaoff);
|
|
}
|
|
|
|
void sec_dumpall(void); /* Call from DDB */
|
|
|
|
extern struct cfdriver sec_cd;
|
|
|
|
void sec_dumpall(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sec_cd.cd_ndevs; ++i)
|
|
if (sec_cd.cd_devs[i])
|
|
sec_dumpdma(sec_cd.cd_devs[i]);
|
|
}
|
|
#endif
|