Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/arch/amiga/dev/sbic.c

2906 lines
71 KiB
C
Raw Blame History

/* $NetBSD: sbic.c,v 1.34 1998/11/05 14:13:59 frueauf Exp $ */
/*
* Copyright (c) 1994 Christian E. Hopps
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Van Jacobson of Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)scsi.c 7.5 (Berkeley) 5/4/91
*/
/*
* AMIGA AMD 33C93 scsi adaptor driver
*/
#include "opt_ddb.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/kernel.h> /* For hz */
#include <sys/disklabel.h>
#include <sys/dkstat.h>
#include <sys/buf.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <vm/vm.h>
#include <vm/vm_kern.h>
#include <vm/vm_page.h>
#include <machine/pmap.h>
#include <machine/cpu.h>
#include <amiga/amiga/device.h>
#include <amiga/amiga/custom.h>
#include <amiga/amiga/isr.h>
#include <amiga/dev/dmavar.h>
#include <amiga/dev/sbicreg.h>
#include <amiga/dev/sbicvar.h>
/* These are for bounce buffers */
#include <amiga/amiga/cc.h>
#include <amiga/dev/zbusvar.h>
#include <vm/pmap.h>
/* Since I can't find this in any other header files */
#define SCSI_PHASE(reg) (reg&0x07)
/*
* SCSI delays
* In u-seconds, primarily for state changes on the SPC.
*/
#define SBIC_CMD_WAIT 50000 /* wait per step of 'immediate' cmds */
#define SBIC_DATA_WAIT 50000 /* wait per data in/out step */
#define SBIC_INIT_WAIT 50000 /* wait per step (both) during init */
#define b_cylin b_resid
#define SBIC_WAIT(regs, until, timeo) sbicwait(regs, until, timeo, __LINE__)
int sbicicmd __P((struct sbic_softc *, int, int, void *, int, void *, int));
int sbicgo __P((struct sbic_softc *, struct scsipi_xfer *));
int sbicdmaok __P((struct sbic_softc *, struct scsipi_xfer *));
int sbicwait __P((sbic_regmap_t, char, int , int));
int sbiccheckdmap __P((void *, u_long, u_long));
int sbicselectbus __P((struct sbic_softc *, sbic_regmap_t, u_char, u_char, u_char));
int sbicxfstart __P((sbic_regmap_t, int, u_char, int));
int sbicxfout __P((sbic_regmap_t regs, int, void *, int));
int sbicfromscsiperiod __P((struct sbic_softc *, sbic_regmap_t, int));
int sbictoscsiperiod __P((struct sbic_softc *, sbic_regmap_t, int));
int sbicpoll __P((struct sbic_softc *));
int sbicnextstate __P((struct sbic_softc *, u_char, u_char));
int sbicmsgin __P((struct sbic_softc *));
int sbicxfin __P((sbic_regmap_t regs, int, void *));
int sbicabort __P((struct sbic_softc *, sbic_regmap_t, char *));
void sbicxfdone __P((struct sbic_softc *, sbic_regmap_t, int));
void sbicerror __P((struct sbic_softc *, sbic_regmap_t, u_char));
void sbicstart __P((struct sbic_softc *));
void sbicreset __P((struct sbic_softc *));
void sbic_scsidone __P((struct sbic_acb *, int));
void sbic_sched __P((struct sbic_softc *));
void sbic_save_ptrs __P((struct sbic_softc *, sbic_regmap_t,int,int));
void sbic_load_ptrs __P((struct sbic_softc *, sbic_regmap_t,int,int));
#ifdef DEBUG
void sbicdumpstate __P((void));
void sbic_dump_acb __P((struct sbic_acb *));
#endif
/*
* Synch xfer parameters, and timing conversions
*/
int sbic_min_period = SBIC_SYN_MIN_PERIOD; /* in cycles = f(ICLK,FSn) */
int sbic_max_offset = SBIC_SYN_MAX_OFFSET; /* pure number */
int sbic_cmd_wait = SBIC_CMD_WAIT;
int sbic_data_wait = SBIC_DATA_WAIT;
int sbic_init_wait = SBIC_INIT_WAIT;
/*
* was broken before.. now if you want this you get it for all drives
* on sbic controllers.
*/
u_char sbic_inhibit_sync[8];
int sbic_enable_reselect = 1;
int sbic_clock_override = 0;
int sbic_no_dma = 0;
int sbic_parallel_operations = 1;
#ifdef DEBUG
sbic_regmap_t debug_sbic_regs;
int sbicdma_ops = 0; /* total DMA operations */
int sbicdma_bounces = 0; /* number operations using bounce buffer */
int sbicdma_hits = 0; /* number of DMA chains that were contiguous */
int sbicdma_misses = 0; /* number of DMA chains that were not contiguous */
int sbicdma_saves = 0;
#define QPRINTF(a) if (sbic_debug > 1) printf a
int sbic_debug = 0;
int sync_debug = 0;
int sbic_dma_debug = 0;
int reselect_debug = 0;
int report_sense = 0;
int data_pointer_debug = 0;
u_char debug_asr, debug_csr, routine;
void sbictimeout __P((struct sbic_softc *dev));
#define CSR_TRACE_SIZE 32
#if CSR_TRACE_SIZE
#define CSR_TRACE(w,c,a,x) do { \
int s = splbio(); \
csr_trace[csr_traceptr].whr = (w); csr_trace[csr_traceptr].csr = (c); \
csr_trace[csr_traceptr].asr = (a); csr_trace[csr_traceptr].xtn = (x); \
dma_cachectl((caddr_t)&csr_trace[csr_traceptr], sizeof(csr_trace[0])); \
csr_traceptr = (csr_traceptr + 1) & (CSR_TRACE_SIZE - 1); \
/* dma_cachectl((caddr_t)&csr_traceptr, sizeof(csr_traceptr));*/ \
splx(s); \
} while (0)
int csr_traceptr;
int csr_tracesize = CSR_TRACE_SIZE;
struct {
u_char whr;
u_char csr;
u_char asr;
u_char xtn;
} csr_trace[CSR_TRACE_SIZE];
#else
#define CSR_TRACE(w,c,a,x)
#endif
#define SBIC_TRACE_SIZE 0
#if SBIC_TRACE_SIZE
#define SBIC_TRACE(dev) do { \
int s = splbio(); \
sbic_trace[sbic_traceptr].sp = &s; \
sbic_trace[sbic_traceptr].line = __LINE__; \
sbic_trace[sbic_traceptr].sr = s; \
sbic_trace[sbic_traceptr].csr = csr_traceptr; \
dma_cachectl(&sbic_trace[sbic_traceptr], sizeof(sbic_trace[0])); \
sbic_traceptr = (sbic_traceptr + 1) & (SBIC_TRACE_SIZE - 1); \
dma_cachectl(&sbic_traceptr, sizeof(sbic_traceptr)); \
if (dev) dma_cachectl(dev, sizeof(*dev)); \
splx(s); \
} while (0)
int sbic_traceptr;
int sbic_tracesize = SBIC_TRACE_SIZE;
struct {
void *sp;
u_short line;
u_short sr;
int csr;
} sbic_trace[SBIC_TRACE_SIZE];
#else
#define SBIC_TRACE(dev)
#endif
#else /* DEBUG */
#define QPRINTF(a)
#define CSR_TRACE(w,c,a,x)
#define SBIC_TRACE(dev)
#endif /* DEBUG */
/*
* default minphys routine for sbic based controllers
*/
void
sbic_minphys(bp)
struct buf *bp;
{
/*
* No max transfer at this level.
*/
minphys(bp);
}
/*
* Save DMA pointers. Take into account partial transfer. Shut down DMA.
*/
void
sbic_save_ptrs(dev, regs, target, lun)
struct sbic_softc *dev;
sbic_regmap_t regs;
int target, lun;
{
int count, asr, s;
struct sbic_acb* acb;
SBIC_TRACE(dev);
if( !dev->sc_cur ) return;
if( !(dev->sc_flags & SBICF_INDMA) ) return; /* DMA not active */
s = splbio();
acb = dev->sc_nexus;
count = -1;
do {
GET_SBIC_asr(regs, asr);
if( asr & SBIC_ASR_DBR ) {
printf("sbic_save_ptrs: asr %02x canceled!\n", asr);
splx(s);
SBIC_TRACE(dev);
return;
}
} while( asr & (SBIC_ASR_BSY|SBIC_ASR_CIP) );
/* Save important state */
/* must be done before dmastop */
acb->sc_dmacmd = dev->sc_dmacmd;
SBIC_TC_GET(regs, count);
/* Shut down DMA ====CAREFUL==== */
dev->sc_dmastop(dev);
dev->sc_flags &= ~SBICF_INDMA;
SBIC_TC_PUT(regs, 0);
#ifdef DEBUG
if(!count && sbic_debug) printf("%dcount0",target);
if(data_pointer_debug == -1)
printf("SBIC saving target %d data pointers from (%p,%x)%xASR:%02x",
target, dev->sc_cur->dc_addr, dev->sc_cur->dc_count,
acb->sc_dmacmd, asr);
#endif
/* Fixup partial xfers */
acb->sc_kv.dc_addr += (dev->sc_tcnt - count);
acb->sc_kv.dc_count -= (dev->sc_tcnt - count);
acb->sc_pa.dc_addr += (dev->sc_tcnt - count);
acb->sc_pa.dc_count -= ((dev->sc_tcnt - count)>>1);
acb->sc_tcnt = dev->sc_tcnt = count;
#ifdef DEBUG
if(data_pointer_debug)
printf(" at (%p,%x):%x\n",
dev->sc_cur->dc_addr, dev->sc_cur->dc_count,count);
sbicdma_saves++;
#endif
splx(s);
SBIC_TRACE(dev);
}
/*
* DOES NOT RESTART DMA!!!
*/
void sbic_load_ptrs(dev, regs, target, lun)
struct sbic_softc *dev;
sbic_regmap_t regs;
int target, lun;
{
int s, count;
char* vaddr, * paddr;
struct sbic_acb *acb;
SBIC_TRACE(dev);
acb = dev->sc_nexus;
if( !acb->sc_kv.dc_count ) {
/* No data to xfer */
SBIC_TRACE(dev);
return;
}
s = splbio();
dev->sc_last = dev->sc_cur = &acb->sc_pa;
dev->sc_tcnt = acb->sc_tcnt;
dev->sc_dmacmd = acb->sc_dmacmd;
#ifdef DEBUG
sbicdma_ops++;
#endif
if( !dev->sc_tcnt ) {
/* sc_tcnt == 0 implies end of segment */
/* do kvm to pa mappings */
paddr = acb->sc_pa.dc_addr =
(char *) kvtop(acb->sc_kv.dc_addr);
vaddr = acb->sc_kv.dc_addr;
count = acb->sc_kv.dc_count;
for(count = (NBPG - ((int)vaddr & PGOFSET));
count < acb->sc_kv.dc_count
&& (char*)kvtop(vaddr + count + 4) == paddr + count + 4;
count += NBPG);
/* If it's all contiguous... */
if(count > acb->sc_kv.dc_count ) {
count = acb->sc_kv.dc_count;
#ifdef DEBUG
sbicdma_hits++;
#endif
} else {
#ifdef DEBUG
sbicdma_misses++;
#endif
}
acb->sc_tcnt = count;
acb->sc_pa.dc_count = count >> 1;
#ifdef DEBUG
if(data_pointer_debug)
printf("DMA recalc:kv(%p,%x)pa(%p,%lx)\n",
acb->sc_kv.dc_addr,
acb->sc_kv.dc_count,
acb->sc_pa.dc_addr,
acb->sc_tcnt);
#endif
}
splx(s);
#ifdef DEBUG
if(data_pointer_debug)
printf("SBIC restoring target %d data pointers at (%p,%x)%x\n",
target, dev->sc_cur->dc_addr, dev->sc_cur->dc_count,
dev->sc_dmacmd);
#endif
SBIC_TRACE(dev);
}
/*
* used by specific sbic controller
*
* it appears that the higher level code does nothing with LUN's
* so I will too. I could plug it in, however so could they
* in scsi_scsipi_cmd().
*/
int
sbic_scsicmd(xs)
struct scsipi_xfer *xs;
{
struct sbic_acb *acb;
struct sbic_softc *dev;
struct scsipi_link *slp;
int flags, s, stat;
slp = xs->sc_link;
dev = slp->adapter_softc;
SBIC_TRACE(dev);
flags = xs->flags;
if (flags & SCSI_DATA_UIO)
panic("sbic: scsi data uio requested");
if (dev->sc_nexus && flags & SCSI_POLL)
panic("sbic_scsicmd: busy");
if (slp->scsipi_scsi.target == slp->scsipi_scsi.adapter_target)
return ESCAPE_NOT_SUPPORTED;
s = splbio();
acb = dev->free_list.tqh_first;
if (acb)
TAILQ_REMOVE(&dev->free_list, acb, chain);
splx(s);
if (acb == NULL) {
#ifdef DEBUG
printf("sbic_scsicmd: unable to queue request for target %d\n",
slp->scsipi_scsi.target);
#ifdef DDB
Debugger();
#endif
#endif
xs->error = XS_DRIVER_STUFFUP;
SBIC_TRACE(dev);
return(TRY_AGAIN_LATER);
}
acb->flags = ACB_ACTIVE;
if (flags & SCSI_DATA_IN)
acb->flags |= ACB_DATAIN;
acb->xs = xs;
bcopy(xs->cmd, &acb->cmd, xs->cmdlen);
acb->clen = xs->cmdlen;
acb->sc_kv.dc_addr = xs->data;
acb->sc_kv.dc_count = xs->datalen;
acb->pa_addr = xs->data ? (char *)kvtop(xs->data) : 0; /* XXXX check */
if (flags & SCSI_POLL) {
s = splbio();
/*
* This has major side effects -- it locks up the machine
*/
dev->sc_flags |= SBICF_ICMD;
do {
while(dev->sc_nexus)
sbicpoll(dev);
dev->sc_nexus = acb;
dev->sc_stat[0] = -1;
dev->sc_xs = xs;
dev->target = slp->scsipi_scsi.target;
dev->lun = slp->scsipi_scsi.lun;
stat = sbicicmd(dev, slp->scsipi_scsi.target, slp->scsipi_scsi.lun,
&acb->cmd, acb->clen,
acb->sc_kv.dc_addr, acb->sc_kv.dc_count);
} while (dev->sc_nexus != acb);
sbic_scsidone(acb, stat);
splx(s);
SBIC_TRACE(dev);
return(COMPLETE);
}
s = splbio();
TAILQ_INSERT_TAIL(&dev->ready_list, acb, chain);
if (dev->sc_nexus) {
splx(s);
SBIC_TRACE(dev);
return(SUCCESSFULLY_QUEUED);
}
/*
* nothing is active, try to start it now.
*/
sbic_sched(dev);
splx(s);
SBIC_TRACE(dev);
/* TODO: add sbic_poll to do SCSI_POLL operations */
#if 0
if (flags & SCSI_POLL)
return(COMPLETE);
#endif
return(SUCCESSFULLY_QUEUED);
}
/*
* attempt to start the next available command
*/
void
sbic_sched(dev)
struct sbic_softc *dev;
{
struct scsipi_xfer *xs;
struct scsipi_link *slp;
struct sbic_acb *acb;
int flags, /*phase,*/ stat, i;
SBIC_TRACE(dev);
if (dev->sc_nexus)
return; /* a command is current active */
SBIC_TRACE(dev);
for (acb = dev->ready_list.tqh_first; acb; acb = acb->chain.tqe_next) {
slp = acb->xs->sc_link;
i = slp->scsipi_scsi.target;
if (!(dev->sc_tinfo[i].lubusy & (1 << slp->scsipi_scsi.lun))) {
struct sbic_tinfo *ti = &dev->sc_tinfo[i];
TAILQ_REMOVE(&dev->ready_list, acb, chain);
dev->sc_nexus = acb;
slp = acb->xs->sc_link;
ti = &dev->sc_tinfo[slp->scsipi_scsi.target];
ti->lubusy |= (1 << slp->scsipi_scsi.lun);
acb->sc_pa.dc_addr = acb->pa_addr; /* XXXX check */
break;
}
}
SBIC_TRACE(dev);
if (acb == NULL)
return; /* did not find an available command */
dev->sc_xs = xs = acb->xs;
slp = xs->sc_link;
flags = xs->flags;
if (flags & SCSI_RESET)
sbicreset(dev);
#ifdef DEBUG
if( data_pointer_debug > 1 )
printf("sbic_sched(%d,%d)\n",slp->scsipi_scsi.target,
slp->scsipi_scsi.lun);
#endif
dev->sc_stat[0] = -1;
dev->target = slp->scsipi_scsi.target;
dev->lun = slp->scsipi_scsi.lun;
if ( flags & SCSI_POLL || ( !sbic_parallel_operations
&& (/*phase == STATUS_PHASE ||*/
sbicdmaok(dev, xs) == 0) ) )
stat = sbicicmd(dev, slp->scsipi_scsi.target,
slp->scsipi_scsi.lun, &acb->cmd,
acb->clen, acb->sc_kv.dc_addr, acb->sc_kv.dc_count);
else if (sbicgo(dev, xs) == 0) {
SBIC_TRACE(dev);
return;
} else
stat = dev->sc_stat[0];
sbic_scsidone(acb, stat);
SBIC_TRACE(dev);
}
void
sbic_scsidone(acb, stat)
struct sbic_acb *acb;
int stat;
{
struct scsipi_xfer *xs;
struct scsipi_link *slp;
struct sbic_softc *dev;
int dosched = 0;
xs = acb->xs;
slp = xs->sc_link;
dev = slp->adapter_softc;
SBIC_TRACE(dev);
#ifdef DIAGNOSTIC
if (acb == NULL || xs == NULL) {
printf("sbic_scsidone -- (%d,%d) no scsi_xfer\n",
dev->target, dev->lun);
#ifdef DDB
Debugger();
#endif
return;
}
#endif
/*
* is this right?
*/
xs->status = stat;
#ifdef DEBUG
if( data_pointer_debug > 1 )
printf("scsidone: (%d,%d)->(%d,%d)%02x\n",
slp->scsipi_scsi.target, slp->scsipi_scsi.lun,
dev->target, dev->lun, stat);
if( xs->sc_link->scsipi_scsi.target ==
dev->sc_link.scsipi_scsi.adapter_target )
panic("target == hostid");
#endif
if (xs->error == XS_NOERROR && !(acb->flags & ACB_CHKSENSE)) {
if (stat == SCSI_CHECK) {
/* Schedule a REQUEST SENSE */
struct scsipi_sense *ss = (void *)&acb->cmd;
#ifdef DEBUG
if (report_sense)
printf("sbic_scsidone: autosense %02x targ %d lun %d",
acb->cmd.opcode, slp->scsipi_scsi.target,
slp->scsipi_scsi.lun);
#endif
bzero(ss, sizeof(*ss));
ss->opcode = REQUEST_SENSE;
ss->byte2 = slp->scsipi_scsi.lun << 5;
ss->length = sizeof(struct scsipi_sense_data);
acb->clen = sizeof(*ss);
acb->sc_kv.dc_addr = (char *)&xs->sense.scsi_sense;
acb->sc_kv.dc_count = sizeof(struct scsipi_sense_data);
acb->pa_addr = (char *)kvtop((u_char *)&xs->sense.scsi_sense); /* XXX check */
acb->flags = ACB_ACTIVE | ACB_CHKSENSE | ACB_DATAIN;
TAILQ_INSERT_HEAD(&dev->ready_list, acb, chain);
dev->sc_tinfo[slp->scsipi_scsi.target].lubusy &=
~(1 << slp->scsipi_scsi.lun);
dev->sc_tinfo[slp->scsipi_scsi.target].senses++;
if (dev->sc_nexus == acb) {
dev->sc_nexus = NULL;
dev->sc_xs = NULL;
sbic_sched(dev);
}
SBIC_TRACE(dev);
return;
}
}
if (xs->error == XS_NOERROR && (acb->flags & ACB_CHKSENSE)) {
xs->error = XS_SENSE;
#ifdef DEBUG
if (report_sense)
printf(" => %02x %02x\n", xs->sense.scsi_sense.flags,
xs->sense.scsi_sense.extra_bytes[3]);
#endif
} else {
xs->resid = 0; /* XXXX */
}
#if whataboutthisone
case SCSI_BUSY:
xs->error = XS_BUSY;
break;
#endif
xs->flags |= ITSDONE;
/*
* Remove the ACB from whatever queue it's on. We have to do a bit of
* a hack to figure out which queue it's on. Note that it is *not*
* necessary to cdr down the ready queue, but we must cdr down the
* nexus queue and see if it's there, so we can mark the unit as no
* longer busy. This code is sickening, but it works.
*/
if (acb == dev->sc_nexus) {
dev->sc_nexus = NULL;
dev->sc_xs = NULL;
dev->sc_tinfo[slp->scsipi_scsi.target].lubusy &=
~(1<<slp->scsipi_scsi.lun);
if (dev->ready_list.tqh_first)
dosched = 1; /* start next command */
} else if (dev->ready_list.tqh_last == &acb->chain.tqe_next) {
TAILQ_REMOVE(&dev->ready_list, acb, chain);
} else {
register struct sbic_acb *acb2;
for (acb2 = dev->nexus_list.tqh_first; acb2;
acb2 = acb2->chain.tqe_next) {
if (acb2 == acb) {
TAILQ_REMOVE(&dev->nexus_list, acb, chain);
dev->sc_tinfo[slp->scsipi_scsi.target].lubusy
&= ~(1<<slp->scsipi_scsi.lun);
break;
}
}
if (acb2)
;
else if (acb->chain.tqe_next) {
TAILQ_REMOVE(&dev->ready_list, acb, chain);
} else {
printf("%s: can't find matching acb\n",
dev->sc_dev.dv_xname);
#ifdef DDB
Debugger();
#endif
}
}
/* Put it on the free list. */
acb->flags = ACB_FREE;
TAILQ_INSERT_HEAD(&dev->free_list, acb, chain);
dev->sc_tinfo[slp->scsipi_scsi.target].cmds++;
scsipi_done(xs);
if (dosched)
sbic_sched(dev);
SBIC_TRACE(dev);
}
int
sbicdmaok(dev, xs)
struct sbic_softc *dev;
struct scsipi_xfer *xs;
{
if (sbic_no_dma || xs->datalen & 0x1 || (u_int)xs->data & 0x3)
return(0);
/*
* controller supports dma to any addresses?
*/
else if ((dev->sc_flags & SBICF_BADDMA) == 0)
return(1);
/*
* this address is ok for dma?
*/
else if (sbiccheckdmap(xs->data, xs->datalen, dev->sc_dmamask) == 0)
return(1);
/*
* we have a bounce buffer?
*/
else if (dev->sc_tinfo[xs->sc_link->scsipi_scsi.target].bounce)
return(1);
/*
* try to get one
*/
else if ((dev->sc_tinfo[xs->sc_link->scsipi_scsi.target].bounce
= (char *)alloc_z2mem(MAXPHYS))) {
if (isztwomem(dev->sc_tinfo[xs->sc_link->scsipi_scsi.target].bounce))
printf("alloc ZII target %d bounce pa 0x%x\n",
xs->sc_link->scsipi_scsi.target,
kvtop(dev->sc_tinfo[xs->sc_link->scsipi_scsi.target].bounce));
else if (dev->sc_tinfo[xs->sc_link->scsipi_scsi.target].bounce)
printf("alloc CHIP target %d bounce pa 0x%p\n",
xs->sc_link->scsipi_scsi.target,
PREP_DMA_MEM(dev->sc_tinfo[xs->sc_link->scsipi_scsi.target].bounce));
return(1);
}
return(0);
}
int
sbicwait(regs, until, timeo, line)
sbic_regmap_t regs;
char until;
int timeo;
int line;
{
u_char val;
int csr;
SBIC_TRACE((struct sbic_softc *)0);
if (timeo == 0)
timeo = 1000000; /* some large value.. */
GET_SBIC_asr(regs,val);
while ((val & until) == 0) {
if (timeo-- == 0) {
GET_SBIC_csr(regs, csr);
printf("sbicwait TIMEO @%d with asr=x%x csr=x%x\n",
line, val, csr);
#if defined(DDB) && defined(DEBUG)
Debugger();
#endif
return(val); /* Maybe I should abort */
break;
}
DELAY(1);
GET_SBIC_asr(regs,val);
}
SBIC_TRACE((struct sbic_softc *)0);
return(val);
}
int
sbicabort(dev, regs, where)
struct sbic_softc *dev;
sbic_regmap_t regs;
char *where;
{
u_char csr, asr;
GET_SBIC_asr(regs, asr);
GET_SBIC_csr(regs, csr);
printf ("%s: abort %s: csr = 0x%02x, asr = 0x%02x\n",
dev->sc_dev.dv_xname, where, csr, asr);
#if 0
/* Clean up running command */
if (dev->sc_nexus != NULL) {
dev->sc_nexus->xs->error = XS_DRIVER_STUFFUP;
sbic_scsidone(dev->sc_nexus, dev->sc_stat[0]);
}
while (acb = dev->nexus_list.tqh_first) {
acb->xs->error = XS_DRIVER_STUFFUP;
sbic_scsidone(acb, -1 /*acb->stat[0]*/);
}
#endif
/* Clean up chip itself */
if (dev->sc_flags & SBICF_SELECTED) {
while( asr & SBIC_ASR_DBR ) {
/* sbic is jammed w/data. need to clear it */
/* But we don't know what direction it needs to go */
GET_SBIC_data(regs, asr);
printf("%s: abort %s: clearing data buffer 0x%02x\n",
dev->sc_dev.dv_xname, where, asr);
GET_SBIC_asr(regs, asr);
if( asr & SBIC_ASR_DBR ) /* Not the read direction, then */
SET_SBIC_data(regs, asr);
GET_SBIC_asr(regs, asr);
}
WAIT_CIP(regs);
printf("%s: sbicabort - sending ABORT command\n", dev->sc_dev.dv_xname);
SET_SBIC_cmd(regs, SBIC_CMD_ABORT);
WAIT_CIP(regs);
GET_SBIC_asr(regs, asr);
if (asr & (SBIC_ASR_BSY|SBIC_ASR_LCI)) {
/* ok, get more drastic.. */
printf("%s: sbicabort - asr %x, trying to reset\n", dev->sc_dev.dv_xname, asr);
sbicreset(dev);
dev->sc_flags &= ~SBICF_SELECTED;
return -1;
}
printf("%s: sbicabort - sending DISC command\n", dev->sc_dev.dv_xname);
SET_SBIC_cmd(regs, SBIC_CMD_DISC);
do {
asr = SBIC_WAIT (regs, SBIC_ASR_INT, 0);
GET_SBIC_csr (regs, csr);
CSR_TRACE('a',csr,asr,0);
} while ((csr != SBIC_CSR_DISC) && (csr != SBIC_CSR_DISC_1)
&& (csr != SBIC_CSR_CMD_INVALID));
/* lets just hope it worked.. */
dev->sc_flags &= ~SBICF_SELECTED;
}
return -1;
}
/*
* Initialize driver-private structures
*/
void
sbicinit(dev)
struct sbic_softc *dev;
{
sbic_regmap_t regs;
u_int i;
struct sbic_acb *acb;
u_int inhibit_sync;
extern u_long scsi_nosync;
extern int shift_nosync;
regs = dev->sc_sbic;
if ((dev->sc_flags & SBICF_ALIVE) == 0) {
TAILQ_INIT(&dev->ready_list);
TAILQ_INIT(&dev->nexus_list);
TAILQ_INIT(&dev->free_list);
dev->sc_nexus = NULL;
dev->sc_xs = NULL;
acb = dev->sc_acb;
bzero(acb, sizeof(dev->sc_acb));
for (i = 0; i < sizeof(dev->sc_acb) / sizeof(*acb); i++) {
TAILQ_INSERT_TAIL(&dev->free_list, acb, chain);
acb++;
}
bzero(dev->sc_tinfo, sizeof(dev->sc_tinfo));
#ifdef DEBUG
/* make sure timeout is really not needed */
timeout((void *)sbictimeout, dev, 30 * hz);
#endif
} else panic("sbic: reinitializing driver!");
dev->sc_flags |= SBICF_ALIVE;
dev->sc_flags &= ~SBICF_SELECTED;
/* initialize inhibit array */
if (scsi_nosync) {
inhibit_sync = (scsi_nosync >> shift_nosync) & 0xff;
shift_nosync += 8;
#ifdef DEBUG
if (inhibit_sync)
printf("%s: Inhibiting synchronous transfer %02x\n",
dev->sc_dev.dv_xname, inhibit_sync);
#endif
for (i = 0; i < 8; ++i)
if (inhibit_sync & (1 << i))
sbic_inhibit_sync[i] = 1;
}
sbicreset(dev);
}
void
sbicreset(dev)
struct sbic_softc *dev;
{
sbic_regmap_t regs;
u_int my_id, s;
u_char csr;
#if 0
u_int i;
struct sbic_acb *acb;
#endif
regs = dev->sc_sbic;
#if 0
if (dev->sc_flags & SBICF_ALIVE) {
SET_SBIC_cmd(regs, SBIC_CMD_ABORT);
WAIT_CIP(regs);
}
#else
SET_SBIC_cmd(regs, SBIC_CMD_ABORT);
WAIT_CIP(regs);
#endif
s = splbio();
my_id = dev->sc_link.scsipi_scsi.adapter_target & SBIC_ID_MASK;
/* Enable advanced mode */
my_id |= SBIC_ID_EAF /*| SBIC_ID_EHP*/ ;
SET_SBIC_myid(regs, my_id);
/*
* Disable interrupts (in dmainit) then reset the chip
*/
SET_SBIC_cmd(regs, SBIC_CMD_RESET);
DELAY(25);
SBIC_WAIT(regs, SBIC_ASR_INT, 0);
GET_SBIC_csr(regs, csr); /* clears interrupt also */
if (dev->sc_clkfreq < 110)
my_id |= SBIC_ID_FS_8_10;
else if (dev->sc_clkfreq < 160)
my_id |= SBIC_ID_FS_12_15;
else if (dev->sc_clkfreq < 210)
my_id |= SBIC_ID_FS_16_20;
SET_SBIC_myid(regs, my_id);
/*
* Set up various chip parameters
*/
SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI /* | SBIC_CTL_HSP */
| SBIC_MACHINE_DMA_MODE);
/*
* don't allow (re)selection (SBIC_RID_ES)
* until we can handle target mode!!
*/
SET_SBIC_rselid(regs, SBIC_RID_ER);
SET_SBIC_syn(regs, 0); /* asynch for now */
/*
* anything else was zeroed by reset
*/
splx(s);
#if 0
if ((dev->sc_flags & SBICF_ALIVE) == 0) {
TAILQ_INIT(&dev->ready_list);
TAILQ_INIT(&dev->nexus_list);
TAILQ_INIT(&dev->free_list);
dev->sc_nexus = NULL;
dev->sc_xs = NULL;
acb = dev->sc_acb;
bzero(acb, sizeof(dev->sc_acb));
for (i = 0; i < sizeof(dev->sc_acb) / sizeof(*acb); i++) {
TAILQ_INSERT_TAIL(&dev->free_list, acb, chain);
acb++;
}
bzero(dev->sc_tinfo, sizeof(dev->sc_tinfo));
} else {
if (dev->sc_nexus != NULL) {
dev->sc_nexus->xs->error = XS_DRIVER_STUFFUP;
sbic_scsidone(dev->sc_nexus, dev->sc_stat[0]);
}
while (acb = dev->nexus_list.tqh_first) {
acb->xs->error = XS_DRIVER_STUFFUP;
sbic_scsidone(acb, -1 /*acb->stat[0]*/);
}
}
dev->sc_flags |= SBICF_ALIVE;
#endif
dev->sc_flags &= ~SBICF_SELECTED;
}
void
sbicerror(dev, regs, csr)
struct sbic_softc *dev;
sbic_regmap_t regs;
u_char csr;
{
struct scsipi_xfer *xs;
xs = dev->sc_xs;
#ifdef DIAGNOSTIC
if (xs == NULL)
panic("sbicerror");
#endif
if (xs->flags & SCSI_SILENT)
return;
printf("%s: ", dev->sc_dev.dv_xname);
printf("csr == 0x%02x\n", csr); /* XXX */
}
/*
* select the bus, return when selected or error.
*/
int
sbicselectbus(dev, regs, target, lun, our_addr)
struct sbic_softc *dev;
sbic_regmap_t regs;
u_char target, lun, our_addr;
{
u_char asr, csr, id;
SBIC_TRACE(dev);
QPRINTF(("sbicselectbus %d\n", target));
/*
* if we're already selected, return (XXXX panic maybe?)
*/
if (dev->sc_flags & SBICF_SELECTED) {
SBIC_TRACE(dev);
return(1);
}
/*
* issue select
*/
SBIC_TC_PUT(regs, 0);
SET_SBIC_selid(regs, target);
SET_SBIC_timeo(regs, SBIC_TIMEOUT(250,dev->sc_clkfreq));
/*
* set sync or async
*/
if (dev->sc_sync[target].state == SYNC_DONE)
SET_SBIC_syn(regs, SBIC_SYN (dev->sc_sync[target].offset,
dev->sc_sync[target].period));
else
SET_SBIC_syn(regs, SBIC_SYN (0, sbic_min_period));
GET_SBIC_asr(regs, asr);
if( asr & (SBIC_ASR_INT|SBIC_ASR_BSY) ) {
/* This means we got ourselves reselected upon */
/* printf("sbicselectbus: INT/BSY asr %02x\n", asr);*/
#ifdef DDB
/* Debugger();*/
#endif
SBIC_TRACE(dev);
return 1;
}
SET_SBIC_cmd(regs, SBIC_CMD_SEL_ATN);
/*
* wait for select (merged from seperate function may need
* cleanup)
*/
WAIT_CIP(regs);
do {
asr = SBIC_WAIT(regs, SBIC_ASR_INT | SBIC_ASR_LCI, 0);
if (asr & SBIC_ASR_LCI) {
#ifdef DEBUG
if (reselect_debug)
printf("sbicselectbus: late LCI asr %02x\n", asr);
#endif
SBIC_TRACE(dev);
return 1;
}
GET_SBIC_csr (regs, csr);
CSR_TRACE('s',csr,asr,target);
QPRINTF(("%02x ", csr));
if( csr == SBIC_CSR_RSLT_NI || csr == SBIC_CSR_RSLT_IFY) {
#ifdef DEBUG
if(reselect_debug)
printf("sbicselectbus: reselected asr %02x\n", asr);
#endif
/* We need to handle this now so we don't lock up later */
sbicnextstate(dev, csr, asr);
SBIC_TRACE(dev);
return 1;
}
if( csr == SBIC_CSR_SLT || csr == SBIC_CSR_SLT_ATN) {
panic("sbicselectbus: target issued select!");
return 1;
}
} while (csr != (SBIC_CSR_MIS_2|MESG_OUT_PHASE)
&& csr != (SBIC_CSR_MIS_2|CMD_PHASE) && csr != SBIC_CSR_SEL_TIMEO);
/* Enable (or not) reselection */
if(!sbic_enable_reselect && dev->nexus_list.tqh_first == NULL)
SET_SBIC_rselid (regs, 0);
else
SET_SBIC_rselid (regs, SBIC_RID_ER);
if (csr == (SBIC_CSR_MIS_2|CMD_PHASE)) {
dev->sc_flags |= SBICF_SELECTED; /* device ignored ATN */
GET_SBIC_selid(regs, id);
dev->target = id;
GET_SBIC_tlun(regs,dev->lun);
if( dev->lun & SBIC_TLUN_VALID )
dev->lun &= SBIC_TLUN_MASK;
else
dev->lun = lun;
} else if (csr == (SBIC_CSR_MIS_2|MESG_OUT_PHASE)) {
/*
* Send identify message
* (SCSI-2 requires an identify msg (?))
*/
GET_SBIC_selid(regs, id);
dev->target = id;
GET_SBIC_tlun(regs,dev->lun);
if( dev->lun & SBIC_TLUN_VALID )
dev->lun &= SBIC_TLUN_MASK;
else
dev->lun = lun;
/*
* handle drives that don't want to be asked
* whether to go sync at all.
*/
if (sbic_inhibit_sync[id]
&& dev->sc_sync[id].state == SYNC_START) {
#ifdef DEBUG
if (sync_debug)
printf("Forcing target %d asynchronous.\n", id);
#endif
dev->sc_sync[id].offset = 0;
dev->sc_sync[id].period = sbic_min_period;
dev->sc_sync[id].state = SYNC_DONE;
}
if (dev->sc_sync[id].state != SYNC_START){
if( dev->sc_xs->flags & SCSI_POLL
|| (dev->sc_flags & SBICF_ICMD)
|| !sbic_enable_reselect )
SEND_BYTE (regs, MSG_IDENTIFY | lun);
else
SEND_BYTE (regs, MSG_IDENTIFY_DR | lun);
} else {
/*
* try to initiate a sync transfer.
* So compose the sync message we're going
* to send to the target
*/
#ifdef DEBUG
if (sync_debug)
printf("Sending sync request to target %d ... ",
id);
#endif
/*
* setup scsi message sync message request
*/
dev->sc_msg[0] = MSG_IDENTIFY | lun;
dev->sc_msg[1] = MSG_EXT_MESSAGE;
dev->sc_msg[2] = 3;
dev->sc_msg[3] = MSG_SYNC_REQ;
dev->sc_msg[4] = sbictoscsiperiod(dev, regs,
sbic_min_period);
dev->sc_msg[5] = sbic_max_offset;
if (sbicxfstart(regs, 6, MESG_OUT_PHASE, sbic_cmd_wait))
sbicxfout(regs, 6, dev->sc_msg, MESG_OUT_PHASE);
dev->sc_sync[id].state = SYNC_SENT;
#ifdef DEBUG
if (sync_debug)
printf ("sent\n");
#endif
}
asr = SBIC_WAIT (regs, SBIC_ASR_INT, 0);
GET_SBIC_csr (regs, csr);
CSR_TRACE('y',csr,asr,target);
QPRINTF(("[%02x]", csr));
#ifdef DEBUG
if (sync_debug && dev->sc_sync[id].state == SYNC_SENT)
printf("csr-result of last msgout: 0x%x\n", csr);
#endif
if (csr != SBIC_CSR_SEL_TIMEO)
dev->sc_flags |= SBICF_SELECTED;
}
if (csr == SBIC_CSR_SEL_TIMEO)
dev->sc_xs->error = XS_SELTIMEOUT;
QPRINTF(("\n"));
SBIC_TRACE(dev);
return(csr == SBIC_CSR_SEL_TIMEO);
}
int
sbicxfstart(regs, len, phase, wait)
sbic_regmap_t regs;
int len, wait;
u_char phase;
{
u_char id;
switch (phase) {
case DATA_IN_PHASE:
case MESG_IN_PHASE:
GET_SBIC_selid (regs, id);
id |= SBIC_SID_FROM_SCSI;
SET_SBIC_selid (regs, id);
SBIC_TC_PUT (regs, (unsigned)len);
break;
case DATA_OUT_PHASE:
case MESG_OUT_PHASE:
case CMD_PHASE:
GET_SBIC_selid (regs, id);
id &= ~SBIC_SID_FROM_SCSI;
SET_SBIC_selid (regs, id);
SBIC_TC_PUT (regs, (unsigned)len);
break;
default:
SBIC_TC_PUT (regs, 0);
}
QPRINTF(("sbicxfstart %d, %d, %d\n", len, phase, wait));
return(1);
}
int
sbicxfout(regs, len, bp, phase)
sbic_regmap_t regs;
int len;
void *bp;
int phase;
{
u_char orig_csr, asr, *buf;
int wait;
buf = bp;
wait = sbic_data_wait;
QPRINTF(("sbicxfout {%d} %02x %02x %02x %02x %02x "
"%02x %02x %02x %02x %02x\n", len, buf[0], buf[1], buf[2],
buf[3], buf[4], buf[5], buf[6], buf[7], buf[8], buf[9]));
GET_SBIC_csr (regs, orig_csr);
CSR_TRACE('>',orig_csr,0,0);
/*
* sigh.. WD-PROTO strikes again.. sending the command in one go
* causes the chip to lock up if talking to certain (misbehaving?)
* targets. Anyway, this procedure should work for all targets, but
* it's slightly slower due to the overhead
*/
WAIT_CIP (regs);
SET_SBIC_cmd (regs, SBIC_CMD_XFER_INFO);
for (;len > 0; len--) {
GET_SBIC_asr (regs, asr);
while ((asr & SBIC_ASR_DBR) == 0) {
if ((asr & SBIC_ASR_INT) || --wait < 0) {
#ifdef DEBUG
if (sbic_debug)
printf("sbicxfout fail: l%d i%x w%d\n",
len, asr, wait);
#endif
return (len);
}
/* DELAY(1);*/
GET_SBIC_asr (regs, asr);
}
SET_SBIC_data (regs, *buf);
buf++;
}
SBIC_TC_GET(regs, len);
QPRINTF(("sbicxfout done %d bytes\n", len));
/*
* this leaves with one csr to be read
*/
return(0);
}
/* returns # bytes left to read */
int
sbicxfin(regs, len, bp)
sbic_regmap_t regs;
int len;
void *bp;
{
int wait;
u_char *obp, *buf;
u_char orig_csr, csr, asr;
wait = sbic_data_wait;
obp = bp;
buf = bp;
GET_SBIC_csr (regs, orig_csr);
CSR_TRACE('<',orig_csr,0,0);
QPRINTF(("sbicxfin %d, csr=%02x\n", len, orig_csr));
WAIT_CIP (regs);
SET_SBIC_cmd (regs, SBIC_CMD_XFER_INFO);
for (;len > 0; len--) {
GET_SBIC_asr (regs, asr);
if((asr & SBIC_ASR_PE)) {
#ifdef DEBUG
printf("sbicxfin parity error: l%d i%x w%d\n",
len, asr, wait);
/* return ((unsigned long)buf - (unsigned long)bp); */
#ifdef DDB
Debugger();
#endif
#endif
}
while ((asr & SBIC_ASR_DBR) == 0) {
if ((asr & SBIC_ASR_INT) || --wait < 0) {
#ifdef DEBUG
if (sbic_debug) {
QPRINTF(("sbicxfin fail:{%d} %02x %02x %02x %02x %02x %02x "
"%02x %02x %02x %02x\n", len, obp[0], obp[1], obp[2],
obp[3], obp[4], obp[5], obp[6], obp[7], obp[8], obp[9]));
printf("sbicxfin fail: l%d i%x w%d\n",
len, asr, wait);
}
#endif
return len;
}
if( ! asr & SBIC_ASR_BSY ) {
GET_SBIC_csr(regs, csr);
CSR_TRACE('<',csr,asr,len);
QPRINTF(("[CSR%02xASR%02x]", csr, asr));
}
/* DELAY(1);*/
GET_SBIC_asr (regs, asr);
}
GET_SBIC_data (regs, *buf);
/* QPRINTF(("asr=%02x, csr=%02x, data=%02x\n", asr, csr, *buf));*/
buf++;
}
QPRINTF(("sbicxfin {%d} %02x %02x %02x %02x %02x %02x "
"%02x %02x %02x %02x\n", len, obp[0], obp[1], obp[2],
obp[3], obp[4], obp[5], obp[6], obp[7], obp[8], obp[9]));
/* this leaves with one csr to be read */
return len;
}
/*
* SCSI 'immediate' command: issue a command to some SCSI device
* and get back an 'immediate' response (i.e., do programmed xfer
* to get the response data). 'cbuf' is a buffer containing a scsi
* command of length clen bytes. 'buf' is a buffer of length 'len'
* bytes for data. The transfer direction is determined by the device
* (i.e., by the scsi bus data xfer phase). If 'len' is zero, the
* command must supply no data.
*/
int
sbicicmd(dev, target, lun, cbuf, clen, buf, len)
struct sbic_softc *dev;
void *cbuf, *buf;
int clen, len;
{
sbic_regmap_t regs;
u_char phase, csr, asr;
int wait, i;
struct sbic_acb *acb;
#define CSR_LOG_BUF_SIZE 0
#if CSR_LOG_BUF_SIZE
int bufptr;
int csrbuf[CSR_LOG_BUF_SIZE];
bufptr=0;
#endif
SBIC_TRACE(dev);
regs = dev->sc_sbic;
acb = dev->sc_nexus;
/* Make sure pointers are OK */
dev->sc_last = dev->sc_cur = &acb->sc_pa;
dev->sc_tcnt = acb->sc_tcnt = 0;
acb->sc_pa.dc_count = 0; /* No DMA */
acb->sc_kv.dc_addr = buf;
acb->sc_kv.dc_count = len;
#ifdef DEBUG
routine = 3;
debug_sbic_regs = regs; /* store this to allow debug calls */
if( data_pointer_debug > 1 )
printf("sbicicmd(%d,%d):%d\n", target, lun,
acb->sc_kv.dc_count);
#endif
/*
* set the sbic into non-DMA mode
*/
SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI /*| SBIC_CTL_HSP*/);
dev->sc_stat[0] = 0xff;
dev->sc_msg[0] = 0xff;
i = 1; /* pre-load */
/* We're stealing the SCSI bus */
dev->sc_flags |= SBICF_ICMD;
do {
/*
* select the SCSI bus (it's an error if bus isn't free)
*/
if (!( dev->sc_flags & SBICF_SELECTED )
&& sbicselectbus(dev, regs, target, lun, dev->sc_scsiaddr)) {
/*printf("sbicicmd trying to select busy bus!\n");*/
dev->sc_flags &= ~SBICF_ICMD;
return(-1);
}
/*
* Wait for a phase change (or error) then let the device sequence
* us through the various SCSI phases.
*/
wait = sbic_cmd_wait;
asr = GET_SBIC_asr (regs, asr);
GET_SBIC_csr (regs, csr);
CSR_TRACE('I',csr,asr,target);
QPRINTF((">ASR:%02xCSR:%02x<", asr, csr));
#if CSR_LOG_BUF_SIZE
csrbuf[bufptr++] = csr;
#endif
switch (csr) {
case SBIC_CSR_S_XFERRED:
case SBIC_CSR_DISC:
case SBIC_CSR_DISC_1:
dev->sc_flags &= ~SBICF_SELECTED;
GET_SBIC_cmd_phase (regs, phase);
if (phase == 0x60) {
GET_SBIC_tlun (regs, dev->sc_stat[0]);
i = 0; /* done */
/* break; */ /* Bypass all the state gobldygook */
} else {
#ifdef DEBUG
if(reselect_debug>1)
printf("sbicicmd: handling disconnect\n");
#endif
i = SBIC_STATE_DISCONNECT;
}
break;
case SBIC_CSR_XFERRED|CMD_PHASE:
case SBIC_CSR_MIS|CMD_PHASE:
case SBIC_CSR_MIS_1|CMD_PHASE:
case SBIC_CSR_MIS_2|CMD_PHASE:
if (sbicxfstart(regs, clen, CMD_PHASE, sbic_cmd_wait))
if (sbicxfout(regs, clen,
cbuf, CMD_PHASE))
i = sbicabort(dev, regs,"icmd sending cmd");
#if 0
GET_SBIC_csr(regs, csr); /* Lets us reload tcount */
WAIT_CIP(regs);
GET_SBIC_asr(regs, asr);
CSR_TRACE('I',csr,asr,target);
if( asr & (SBIC_ASR_BSY|SBIC_ASR_LCI|SBIC_ASR_CIP) )
printf("next: cmd sent asr %02x, csr %02x\n",
asr, csr);
#endif
break;
#if 0
case SBIC_CSR_XFERRED|DATA_OUT_PHASE:
case SBIC_CSR_XFERRED|DATA_IN_PHASE:
case SBIC_CSR_MIS|DATA_OUT_PHASE:
case SBIC_CSR_MIS|DATA_IN_PHASE:
case SBIC_CSR_MIS_1|DATA_OUT_PHASE:
case SBIC_CSR_MIS_1|DATA_IN_PHASE:
case SBIC_CSR_MIS_2|DATA_OUT_PHASE:
case SBIC_CSR_MIS_2|DATA_IN_PHASE:
if (acb->sc_kv.dc_count <= 0)
i = sbicabort(dev, regs, "icmd out of data");
else {
wait = sbic_data_wait;
if (sbicxfstart(regs,
acb->sc_kv.dc_count,
SBIC_PHASE(csr), wait))
if (csr & 0x01)
/* data in? */
i=sbicxfin(regs,
acb->sc_kv.dc_count,
acb->sc_kv.dc_addr);
else
i=sbicxfout(regs,
acb->sc_kv.dc_count,
acb->sc_kv.dc_addr,
SBIC_PHASE(csr));
acb->sc_kv.dc_addr +=
(acb->sc_kv.dc_count - i);
acb->sc_kv.dc_count = i;
i = 1;
}
break;
#endif
case SBIC_CSR_XFERRED|STATUS_PHASE:
case SBIC_CSR_MIS|STATUS_PHASE:
case SBIC_CSR_MIS_1|STATUS_PHASE:
case SBIC_CSR_MIS_2|STATUS_PHASE:
/*
* the sbic does the status/cmd-complete reading ok,
* so do this with its hi-level commands.
*/
#ifdef DEBUG
if(sbic_debug)
printf("SBICICMD status phase\n");
#endif
SBIC_TC_PUT(regs, 0);
SET_SBIC_cmd_phase(regs, 0x46);
SET_SBIC_cmd(regs, SBIC_CMD_SEL_ATN_XFER);
break;
#if THIS_IS_A_RESERVED_STATE
case BUS_FREE_PHASE: /* This is not legal */
if( dev->sc_stat[0] != 0xff )
goto out;
break;
#endif
default:
i = sbicnextstate(dev, csr, asr);
}
/*
* make sure the last command was taken,
* ie. we're not hunting after an ignored command..
*/
GET_SBIC_asr(regs, asr);
/* tapes may take a loooong time.. */
while (asr & SBIC_ASR_BSY){
if(asr & SBIC_ASR_DBR) {
printf("sbicicmd: Waiting while sbic is jammed, CSR:%02x,ASR:%02x\n",
csr,asr);
#ifdef DDB
Debugger();
#endif
/* SBIC is jammed */
/* DUNNO which direction */
/* Try old direction */
GET_SBIC_data(regs,i);
GET_SBIC_asr(regs, asr);
if( asr & SBIC_ASR_DBR) /* Wants us to write */
SET_SBIC_data(regs,i);
}
GET_SBIC_asr(regs, asr);
}
/*
* wait for last command to complete
*/
if (asr & SBIC_ASR_LCI) {
printf("sbicicmd: last command ignored\n");
}
else if( i == 1 ) /* Bsy */
SBIC_WAIT (regs, SBIC_ASR_INT, wait);
/*
* do it again
*/
} while ( i > 0 && dev->sc_stat[0] == 0xff);
/* Sometimes we need to do an extra read of the CSR */
GET_SBIC_csr(regs, csr);
CSR_TRACE('I',csr,asr,0xff);
#if CSR_LOG_BUF_SIZE
if(reselect_debug>1)
for(i=0; i<bufptr; i++)
printf("CSR:%02x", csrbuf[i]);
#endif
#ifdef DEBUG
if(data_pointer_debug > 1)
printf("sbicicmd done(%d,%d):%d =%d=\n",
dev->target, lun,
acb->sc_kv.dc_count,
dev->sc_stat[0]);
#endif
QPRINTF(("=STS:%02x=", dev->sc_stat[0]));
dev->sc_flags &= ~SBICF_ICMD;
SBIC_TRACE(dev);
return(dev->sc_stat[0]);
}
/*
* Finish SCSI xfer command: After the completion interrupt from
* a read/write operation, sequence through the final phases in
* programmed i/o. This routine is a lot like sbicicmd except we
* skip (and don't allow) the select, cmd out and data in/out phases.
*/
void
sbicxfdone(dev, regs, target)
struct sbic_softc *dev;
sbic_regmap_t regs;
int target;
{
u_char phase, asr, csr;
int s;
SBIC_TRACE(dev);
QPRINTF(("{"));
s = splbio();
/*
* have the sbic complete on its own
*/
SBIC_TC_PUT(regs, 0);
SET_SBIC_cmd_phase(regs, 0x46);
SET_SBIC_cmd(regs, SBIC_CMD_SEL_ATN_XFER);
do {
asr = SBIC_WAIT (regs, SBIC_ASR_INT, 0);
GET_SBIC_csr (regs, csr);
CSR_TRACE('f',csr,asr,target);
QPRINTF(("%02x:", csr));
} while ((csr != SBIC_CSR_DISC) && (csr != SBIC_CSR_DISC_1)
&& (csr != SBIC_CSR_S_XFERRED));
dev->sc_flags &= ~SBICF_SELECTED;
GET_SBIC_cmd_phase (regs, phase);
QPRINTF(("}%02x", phase));
if (phase == 0x60)
GET_SBIC_tlun(regs, dev->sc_stat[0]);
else
sbicerror(dev, regs, csr);
QPRINTF(("=STS:%02x=\n", dev->sc_stat[0]));
splx(s);
SBIC_TRACE(dev);
}
/*
* No DMA chains
*/
int
sbicgo(dev, xs)
struct sbic_softc *dev;
struct scsipi_xfer *xs;
{
int i, dmaflags, count, usedma;
u_char csr, asr, *addr;
sbic_regmap_t regs;
struct sbic_acb *acb;
SBIC_TRACE(dev);
dev->target = xs->sc_link->scsipi_scsi.target;
dev->lun = xs->sc_link->scsipi_scsi.lun;
acb = dev->sc_nexus;
regs = dev->sc_sbic;
usedma = sbicdmaok(dev, xs);
#ifdef DEBUG
routine = 1;
debug_sbic_regs = regs; /* store this to allow debug calls */
if( data_pointer_debug > 1 )
printf("sbicgo(%d,%d)\n", dev->target, dev->lun);
#endif
/*
* set the sbic into DMA mode
*/
if( usedma )
SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI |
SBIC_MACHINE_DMA_MODE);
else
SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI);
/*
* select the SCSI bus (it's an error if bus isn't free)
*/
if (sbicselectbus(dev, regs, dev->target, dev->lun,
dev->sc_scsiaddr)) {
/* printf("sbicgo: Trying to select busy bus!\n"); */
SBIC_TRACE(dev);
return(0); /* Not done: needs to be rescheduled */
}
dev->sc_stat[0] = 0xff;
/*
* Calculate DMA chains now
*/
dmaflags = 0;
if (acb->flags & ACB_DATAIN)
dmaflags |= DMAGO_READ;
/*
* Deal w/bounce buffers.
*/
addr = acb->sc_kv.dc_addr;
count = acb->sc_kv.dc_count;
if (count && (char *)kvtop(addr) != acb->sc_pa.dc_addr) { /* XXXX check */
printf("sbic: DMA buffer mapping changed %p->%x\n",
acb->sc_pa.dc_addr, kvtop(addr));
#ifdef DDB
Debugger();
#endif
}
#ifdef DEBUG
++sbicdma_ops; /* count total DMA operations */
#endif
if (count && usedma && dev->sc_flags & SBICF_BADDMA &&
sbiccheckdmap(addr, count, dev->sc_dmamask)) {
/*
* need to bounce the dma.
*/
if (dmaflags & DMAGO_READ) {
acb->flags |= ACB_BBUF;
acb->sc_dmausrbuf = addr;
acb->sc_dmausrlen = count;
acb->sc_usrbufpa = (u_char *)kvtop(addr);
if(!dev->sc_tinfo[dev->target].bounce) {
printf("sbicgo: HELP! no bounce allocated for %d\n",
dev->target);
printf("xfer: (%p->%p,%lx)\n", acb->sc_dmausrbuf,
acb->sc_usrbufpa, acb->sc_dmausrlen);
dev->sc_tinfo[xs->sc_link->scsipi_scsi.target].bounce
= (char *)alloc_z2mem(MAXPHYS);
if (isztwomem(dev->sc_tinfo[xs->sc_link->scsipi_scsi.target].bounce))
printf("alloc ZII target %d bounce pa 0x%x\n",
xs->sc_link->scsipi_scsi.target,
kvtop(dev->sc_tinfo[xs->sc_link->scsipi_scsi.target].bounce));
else if (dev->sc_tinfo[xs->sc_link->scsipi_scsi.target].bounce)
printf("alloc CHIP target %d bounce pa 0x%p\n",
xs->sc_link->scsipi_scsi.target,
PREP_DMA_MEM(dev->sc_tinfo[xs->sc_link->scsipi_scsi.target].bounce));
printf("Allocating %d bounce at %x\n",
dev->target,
kvtop(dev->sc_tinfo[dev->target].bounce));
}
} else { /* write: copy to dma buffer */
#ifdef DEBUG
if(data_pointer_debug)
printf("sbicgo: copying %x bytes to target %d bounce %x\n",
count, dev->target,
kvtop(dev->sc_tinfo[dev->target].bounce));
#endif
bcopy (addr, dev->sc_tinfo[dev->target].bounce, count);
}
addr = dev->sc_tinfo[dev->target].bounce;/* and use dma buffer */
acb->sc_kv.dc_addr = addr;
#ifdef DEBUG
++sbicdma_bounces; /* count number of bounced */
#endif
}
/*
* Allocate the DMA chain
*/
/* Set start KVM addresses */
#if 0
acb->sc_kv.dc_addr = addr;
acb->sc_kv.dc_count = count;
#endif
/* Mark end of segment */
acb->sc_tcnt = dev->sc_tcnt = 0;
acb->sc_pa.dc_count = 0;
sbic_load_ptrs(dev, regs, dev->target, dev->lun);
SBIC_TRACE(dev);
/* Enable interrupts but don't do any DMA */
dev->sc_enintr(dev);
if (usedma) {
dev->sc_tcnt = dev->sc_dmago(dev, acb->sc_pa.dc_addr,
acb->sc_pa.dc_count,
dmaflags);
#ifdef DEBUG
dev->sc_dmatimo = dev->sc_tcnt ? 1 : 0;
#endif
} else
dev->sc_dmacmd = 0; /* Don't use DMA */
dev->sc_flags |= SBICF_INDMA;
/* SBIC_TC_PUT(regs, dev->sc_tcnt); */ /* XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
SBIC_TRACE(dev);
sbic_save_ptrs(dev, regs, dev->target, dev->lun);
/*
* push the data cache ( I think this won't work (EH))
*/
#if defined(M68040) || defined(M68060)
if (mmutype == MMU_68040 && usedma && count) {
dma_cachectl(addr, count);
if (((u_int)addr & 0xF) || (((u_int)addr + count) & 0xF))
dev->sc_flags |= SBICF_DCFLUSH;
}
#endif
/*
* enintr() also enables interrupts for the sbic
*/
#ifdef DEBUG
if( data_pointer_debug > 1 )
printf("sbicgo dmago:%d(%p:%lx)\n",
dev->target,dev->sc_cur->dc_addr,dev->sc_tcnt);
#if 0
/*
* Hmm - this isn't right: asr and csr haven't been set yet.
*/
debug_asr = asr;
debug_csr = csr;
#endif
#endif
/*
* Lets cycle a while then let the interrupt handler take over
*/
asr = GET_SBIC_asr(regs, asr);
do {
GET_SBIC_csr(regs, csr);
CSR_TRACE('g',csr,asr,dev->target);
#ifdef DEBUG
debug_csr = csr;
routine = 1;
#endif
QPRINTF(("go[0x%x]", csr));
i = sbicnextstate(dev, csr, asr);
WAIT_CIP(regs);
GET_SBIC_asr(regs, asr);
#ifdef DEBUG
debug_asr = asr;
#endif
if(asr & SBIC_ASR_LCI) printf("sbicgo: LCI asr:%02x csr:%02x\n",
asr,csr);
} while( i == SBIC_STATE_RUNNING
&& asr & (SBIC_ASR_INT|SBIC_ASR_LCI) );
CSR_TRACE('g',csr,asr,i<<4);
SBIC_TRACE(dev);
if (i == SBIC_STATE_DONE && dev->sc_stat[0] == 0xff) printf("sbicgo: done & stat = 0xff\n");
if (i == SBIC_STATE_DONE && dev->sc_stat[0] != 0xff) {
/* if( i == SBIC_STATE_DONE && dev->sc_stat[0] ) { */
/* Did we really finish that fast? */
return 1;
}
return 0;
}
int
sbicintr(dev)
struct sbic_softc *dev;
{
sbic_regmap_t regs;
u_char asr, csr;
int i;
regs = dev->sc_sbic;
/*
* pending interrupt?
*/
GET_SBIC_asr (regs, asr);
if ((asr & SBIC_ASR_INT) == 0)
return(0);
SBIC_TRACE(dev);
do {
GET_SBIC_csr(regs, csr);
CSR_TRACE('i',csr,asr,dev->target);
#ifdef DEBUG
debug_csr = csr;
routine = 2;
#endif
QPRINTF(("intr[0x%x]", csr));
i = sbicnextstate(dev, csr, asr);
WAIT_CIP(regs);
GET_SBIC_asr(regs, asr);
#ifdef DEBUG
debug_asr = asr;
#endif
#if 0
if(asr & SBIC_ASR_LCI) printf("sbicintr: LCI asr:%02x csr:%02x\n",
asr,csr);
#endif
} while(i == SBIC_STATE_RUNNING &&
asr & (SBIC_ASR_INT|SBIC_ASR_LCI));
CSR_TRACE('i',csr,asr,i<<4);
SBIC_TRACE(dev);
return(1);
}
/*
* Run commands and wait for disconnect
*/
int
sbicpoll(dev)
struct sbic_softc *dev;
{
sbic_regmap_t regs;
u_char asr, csr;
int i;
SBIC_TRACE(dev);
regs = dev->sc_sbic;
do {
GET_SBIC_asr (regs, asr);
#ifdef DEBUG
debug_asr = asr;
#endif
GET_SBIC_csr(regs, csr);
CSR_TRACE('p',csr,asr,dev->target);
#ifdef DEBUG
debug_csr = csr;
routine = 2;
#endif
QPRINTF(("poll[0x%x]", csr));
i = sbicnextstate(dev, csr, asr);
WAIT_CIP(regs);
GET_SBIC_asr(regs, asr);
/* tapes may take a loooong time.. */
while (asr & SBIC_ASR_BSY){
if(asr & SBIC_ASR_DBR) {
printf("sbipoll: Waiting while sbic is jammed, CSR:%02x,ASR:%02x\n",
csr,asr);
#ifdef DDB
Debugger();
#endif
/* SBIC is jammed */
/* DUNNO which direction */
/* Try old direction */
GET_SBIC_data(regs,i);
GET_SBIC_asr(regs, asr);
if( asr & SBIC_ASR_DBR) /* Wants us to write */
SET_SBIC_data(regs,i);
}
GET_SBIC_asr(regs, asr);
}
if(asr & SBIC_ASR_LCI) printf("sbicpoll: LCI asr:%02x csr:%02x\n",
asr,csr);
else if( i == 1 ) /* BSY */
SBIC_WAIT(regs, SBIC_ASR_INT, sbic_cmd_wait);
} while(i == SBIC_STATE_RUNNING);
CSR_TRACE('p',csr,asr,i<<4);
SBIC_TRACE(dev);
return(1);
}
/*
* Handle a single msgin
*/
int
sbicmsgin(dev)
struct sbic_softc *dev;
{
sbic_regmap_t regs;
int recvlen;
u_char asr, csr, *tmpaddr;
regs = dev->sc_sbic;
dev->sc_msg[0] = 0xff;
dev->sc_msg[1] = 0xff;
GET_SBIC_asr(regs, asr);
#ifdef DEBUG
if(reselect_debug>1)
printf("sbicmsgin asr=%02x\n", asr);
#endif
sbic_save_ptrs(dev, regs, dev->target, dev->lun);
GET_SBIC_selid (regs, csr);
SET_SBIC_selid (regs, csr | SBIC_SID_FROM_SCSI);
SBIC_TC_PUT(regs, 0);
tmpaddr = dev->sc_msg;
recvlen = 1;
do {
while( recvlen-- ) {
asr = GET_SBIC_asr(regs, asr);
GET_SBIC_csr(regs, csr);
QPRINTF(("sbicmsgin ready to go (csr,asr)=(%02x,%02x)\n",
csr, asr));
RECV_BYTE(regs, *tmpaddr);
CSR_TRACE('m',csr,asr,*tmpaddr);
#if 1
/*
* get the command completion interrupt, or we
* can't send a new command (LCI)
*/
SBIC_WAIT(regs, SBIC_ASR_INT, 0);
GET_SBIC_csr(regs, csr);
CSR_TRACE('X',csr,asr,dev->target);
#else
WAIT_CIP(regs);
do {
GET_SBIC_asr(regs, asr);
csr = 0xff;
GET_SBIC_csr(regs, csr);
CSR_TRACE('X',csr,asr,dev->target);
if( csr == 0xff )
printf("sbicmsgin waiting: csr %02x asr %02x\n", csr, asr);
} while( csr == 0xff );
#endif
#ifdef DEBUG
if(reselect_debug>1)
printf("sbicmsgin: got %02x csr %02x asr %02x\n",
*tmpaddr, csr, asr);
#endif
#if do_parity_check
if( asr & SBIC_ASR_PE ) {
printf ("Parity error");
/* This code simply does not work. */
WAIT_CIP(regs);
SET_SBIC_cmd(regs, SBIC_CMD_SET_ATN);
WAIT_CIP(regs);
GET_SBIC_asr(regs, asr);
WAIT_CIP(regs);
SET_SBIC_cmd(regs, SBIC_CMD_CLR_ACK);
WAIT_CIP(regs);
if( !(asr & SBIC_ASR_LCI) )
/* Target wants to send garbled msg*/
continue;
printf("--fixing\n");
/* loop until a msgout phase occurs on target */
while(csr & 0x07 != MESG_OUT_PHASE) {
while( asr & SBIC_ASR_BSY &&
!(asr & SBIC_ASR_DBR|SBIC_ASR_INT) )
GET_SBIC_asr(regs, asr);
if( asr & SBIC_ASR_DBR )
panic("msgin: jammed again!\n");
GET_SBIC_csr(regs, csr);
CSR_TRACE('e',csr,asr,dev->target);
if( csr & 0x07 != MESG_OUT_PHASE ) {
sbicnextstate(dev, csr, asr);
sbic_save_ptrs(dev, regs,
dev->target,
dev->lun);
}
}
/* Should be msg out by now */
SEND_BYTE(regs, MSG_PARITY_ERROR);
}
else
#endif
tmpaddr++;
if(recvlen) {
/* Clear ACK */
WAIT_CIP(regs);
GET_SBIC_asr(regs, asr);
GET_SBIC_csr(regs, csr);
CSR_TRACE('X',csr,asr,dev->target);
QPRINTF(("sbicmsgin pre byte CLR_ACK (csr,asr)=(%02x,%02x)\n",
csr, asr));
SET_SBIC_cmd(regs, SBIC_CMD_CLR_ACK);
SBIC_WAIT(regs, SBIC_ASR_INT, 0);
}
};
if(dev->sc_msg[0] == 0xff) {
printf("sbicmsgin: sbic swallowed our message\n");
break;
}
#ifdef DEBUG
if (sync_debug)
printf("msgin done csr 0x%x asr 0x%x msg 0x%x\n",
csr, asr, dev->sc_msg[0]);
#endif
/*
* test whether this is a reply to our sync
* request
*/
if (MSG_ISIDENTIFY(dev->sc_msg[0])) {
QPRINTF(("IFFY"));
#if 0
/* There is an implied load-ptrs here */
sbic_load_ptrs(dev, regs, dev->target, dev->lun);
#endif
/* Got IFFY msg -- ack it */
} else if (dev->sc_msg[0] == MSG_REJECT
&& dev->sc_sync[dev->target].state == SYNC_SENT) {
QPRINTF(("REJECT of SYN"));
#ifdef DEBUG
if (sync_debug)
printf("target %d rejected sync, going async\n",
dev->target);
#endif
dev->sc_sync[dev->target].period = sbic_min_period;
dev->sc_sync[dev->target].offset = 0;
dev->sc_sync[dev->target].state = SYNC_DONE;
SET_SBIC_syn(regs,
SBIC_SYN(dev->sc_sync[dev->target].offset,
dev->sc_sync[dev->target].period));
} else if ((dev->sc_msg[0] == MSG_REJECT)) {
QPRINTF(("REJECT"));
/*
* we'll never REJECt a REJECT message..
*/
} else if ((dev->sc_msg[0] == MSG_SAVE_DATA_PTR)) {
QPRINTF(("MSG_SAVE_DATA_PTR"));
/*
* don't reject this either.
*/
} else if ((dev->sc_msg[0] == MSG_DISCONNECT)) {
QPRINTF(("DISCONNECT"));
#ifdef DEBUG
if( reselect_debug>1 && dev->sc_msg[0] == MSG_DISCONNECT )
printf("sbicmsgin: got disconnect msg %s\n",
(dev->sc_flags & SBICF_ICMD)?"rejecting":"");
#endif
if( dev->sc_flags & SBICF_ICMD ) {
/* We're in immediate mode. Prevent disconnects. */
/* prepare to reject the message, NACK */
SET_SBIC_cmd(regs, SBIC_CMD_SET_ATN);
WAIT_CIP(regs);
}
} else if (dev->sc_msg[0] == MSG_CMD_COMPLETE ) {
QPRINTF(("CMD_COMPLETE"));
/* !! KLUDGE ALERT !! quite a few drives don't seem to
* really like the current way of sending the
* sync-handshake together with the ident-message, and
* they react by sending command-complete and
* disconnecting right after returning the valid sync
* handshake. So, all I can do is reselect the drive,
* and hope it won't disconnect again. I don't think
* this is valid behavior, but I can't help fixing a
* problem that apparently exists.
*
* Note: we should not get here on `normal' command
* completion, as that condition is handled by the
* high-level sel&xfer resume command used to walk
* thru status/cc-phase.
*/
#ifdef DEBUG
if (sync_debug)
printf ("GOT MSG %d! target %d acting weird.."
" waiting for disconnect...\n",
dev->sc_msg[0], dev->target);
#endif
/* Check to see if sbic is handling this */
GET_SBIC_asr(regs, asr);
if(asr & SBIC_ASR_BSY)
return SBIC_STATE_RUNNING;
/* Let's try this: Assume it works and set status to 00 */
dev->sc_stat[0] = 0;
} else if (dev->sc_msg[0] == MSG_EXT_MESSAGE
&& tmpaddr == &dev->sc_msg[1]) {
QPRINTF(("ExtMSG\n"));
/* Read in whole extended message */
SET_SBIC_cmd(regs, SBIC_CMD_CLR_ACK);
SBIC_WAIT(regs, SBIC_ASR_INT, 0);
GET_SBIC_asr(regs, asr);
GET_SBIC_csr(regs, csr);
QPRINTF(("CLR ACK asr %02x, csr %02x\n", asr, csr));
RECV_BYTE(regs, *tmpaddr);
CSR_TRACE('x',csr,asr,*tmpaddr);
/* Wait for command completion IRQ */
SBIC_WAIT(regs, SBIC_ASR_INT, 0);
recvlen = *tmpaddr++;
QPRINTF(("Recving ext msg, asr %02x csr %02x len %02x\n",
asr, csr, recvlen));
} else if (dev->sc_msg[0] == MSG_EXT_MESSAGE && dev->sc_msg[1] == 3
&& dev->sc_msg[2] == MSG_SYNC_REQ) {
QPRINTF(("SYN"));
dev->sc_sync[dev->target].period =
sbicfromscsiperiod(dev,
regs, dev->sc_msg[3]);
dev->sc_sync[dev->target].offset = dev->sc_msg[4];
dev->sc_sync[dev->target].state = SYNC_DONE;
SET_SBIC_syn(regs,
SBIC_SYN(dev->sc_sync[dev->target].offset,
dev->sc_sync[dev->target].period));
printf("%s: target %d now synchronous,"
" period=%dns, offset=%d.\n",
dev->sc_dev.dv_xname, dev->target,
dev->sc_msg[3] * 4, dev->sc_msg[4]);
} else {
#ifdef DEBUG
if (sbic_debug || sync_debug)
printf ("sbicmsgin: Rejecting message 0x%02x\n",
dev->sc_msg[0]);
#endif
/* prepare to reject the message, NACK */
SET_SBIC_cmd(regs, SBIC_CMD_SET_ATN);
WAIT_CIP(regs);
}
/* Clear ACK */
WAIT_CIP(regs);
GET_SBIC_asr(regs, asr);
GET_SBIC_csr(regs, csr);
CSR_TRACE('X',csr,asr,dev->target);
QPRINTF(("sbicmsgin pre CLR_ACK (csr,asr)=(%02x,%02x)%d\n",
csr, asr, recvlen));
SET_SBIC_cmd(regs, SBIC_CMD_CLR_ACK);
SBIC_WAIT(regs, SBIC_ASR_INT, 0);
}
#if 0
while((csr == SBIC_CSR_MSGIN_W_ACK)
|| (SBIC_PHASE(csr) == MESG_IN_PHASE));
#else
while (recvlen>0);
#endif
QPRINTF(("sbicmsgin finished: csr %02x, asr %02x\n",csr, asr));
/* Should still have one CSR to read */
return SBIC_STATE_RUNNING;
}
/*
* sbicnextstate()
* return:
* 0 == done
* 1 == working
* 2 == disconnected
* -1 == error
*/
int
sbicnextstate(dev, csr, asr)
struct sbic_softc *dev;
u_char csr, asr;
{
sbic_regmap_t regs;
struct sbic_acb *acb;
int i, newtarget, newlun, wait;
#if 0
unsigned tcnt;
#endif
i = 0;
SBIC_TRACE(dev);
regs = dev->sc_sbic;
acb = dev->sc_nexus;
QPRINTF(("next[%02x,%02x]",asr,csr));
switch (csr) {
case SBIC_CSR_XFERRED|CMD_PHASE:
case SBIC_CSR_MIS|CMD_PHASE:
case SBIC_CSR_MIS_1|CMD_PHASE:
case SBIC_CSR_MIS_2|CMD_PHASE:
sbic_save_ptrs(dev, regs, dev->target, dev->lun);
if (sbicxfstart(regs, acb->clen, CMD_PHASE, sbic_cmd_wait))
if (sbicxfout(regs, acb->clen,
&acb->cmd, CMD_PHASE))
goto abort;
break;
case SBIC_CSR_XFERRED|STATUS_PHASE:
case SBIC_CSR_MIS|STATUS_PHASE:
case SBIC_CSR_MIS_1|STATUS_PHASE:
case SBIC_CSR_MIS_2|STATUS_PHASE:
/*
* this should be the normal i/o completion case.
* get the status & cmd complete msg then let the
* device driver look at what happened.
*/
sbicxfdone(dev,regs,dev->target);
/*
* check for overlapping cache line, flush if so
*/
#if defined(M68040) || defined(M68060)
if (dev->sc_flags & SBICF_DCFLUSH) {
#if 0
printf("sbic: 68040/68060 DMA cache flush needs"
"fixing? %x:%x\n",
dev->sc_xs->data, dev->sc_xs->datalen);
#endif
}
#endif
#ifdef DEBUG
if( data_pointer_debug > 1 )
printf("next dmastop: %d(%p:%lx)\n",
dev->target,dev->sc_cur->dc_addr,dev->sc_tcnt);
dev->sc_dmatimo = 0;
#endif
dev->sc_dmastop(dev); /* was dmafree */
if (acb->flags & ACB_BBUF) {
if ((u_char *)kvtop(acb->sc_dmausrbuf) != acb->sc_usrbufpa)
printf("%s: WARNING - buffer mapping changed %p->%x\n",
dev->sc_dev.dv_xname, acb->sc_usrbufpa,
kvtop(acb->sc_dmausrbuf));
#ifdef DEBUG
if(data_pointer_debug)
printf("sbicgo:copying %lx bytes from target %d bounce %x\n",
acb->sc_dmausrlen,
dev->target,
kvtop(dev->sc_tinfo[dev->target].bounce));
#endif
bcopy(dev->sc_tinfo[dev->target].bounce,
acb->sc_dmausrbuf,
acb->sc_dmausrlen);
}
dev->sc_flags &= ~(SBICF_INDMA | SBICF_DCFLUSH);
sbic_scsidone(acb, dev->sc_stat[0]);
SBIC_TRACE(dev);
return SBIC_STATE_DONE;
case SBIC_CSR_XFERRED|DATA_OUT_PHASE:
case SBIC_CSR_XFERRED|DATA_IN_PHASE:
case SBIC_CSR_MIS|DATA_OUT_PHASE:
case SBIC_CSR_MIS|DATA_IN_PHASE:
case SBIC_CSR_MIS_1|DATA_OUT_PHASE:
case SBIC_CSR_MIS_1|DATA_IN_PHASE:
case SBIC_CSR_MIS_2|DATA_OUT_PHASE:
case SBIC_CSR_MIS_2|DATA_IN_PHASE:
if( dev->sc_xs->flags & SCSI_POLL || dev->sc_flags & SBICF_ICMD
|| acb->sc_dmacmd == 0 ) {
/* Do PIO */
SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI);
if (acb->sc_kv.dc_count <= 0) {
printf("sbicnextstate:xfer count %d asr%x csr%x\n",
acb->sc_kv.dc_count, asr, csr);
goto abort;
}
wait = sbic_data_wait;
if( sbicxfstart(regs,
acb->sc_kv.dc_count,
SBIC_PHASE(csr), wait)) {
if( SBIC_PHASE(csr) == DATA_IN_PHASE )
/* data in? */
i=sbicxfin(regs,
acb->sc_kv.dc_count,
acb->sc_kv.dc_addr);
else
i=sbicxfout(regs,
acb->sc_kv.dc_count,
acb->sc_kv.dc_addr,
SBIC_PHASE(csr));
}
acb->sc_kv.dc_addr +=
(acb->sc_kv.dc_count - i);
acb->sc_kv.dc_count = i;
} else {
if (acb->sc_kv.dc_count <= 0) {
printf("sbicnextstate:xfer count %d asr%x csr%x\n",
acb->sc_kv.dc_count, asr, csr);
goto abort;
}
/*
* do scatter-gather dma
* hacking the controller chip, ouch..
*/
SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI |
SBIC_MACHINE_DMA_MODE);
/*
* set next dma addr and dec count
*/
#if 0
SBIC_TC_GET(regs, tcnt);
dev->sc_cur->dc_count -= ((dev->sc_tcnt - tcnt) >> 1);
dev->sc_cur->dc_addr += (dev->sc_tcnt - tcnt);
dev->sc_tcnt = acb->sc_tcnt = tcnt;
#else
sbic_save_ptrs(dev, regs, dev->target, dev->lun);
sbic_load_ptrs(dev, regs, dev->target, dev->lun);
#endif
#ifdef DEBUG
if( data_pointer_debug > 1 )
printf("next dmanext: %d(%p:%lx)\n",
dev->target,dev->sc_cur->dc_addr,
dev->sc_tcnt);
dev->sc_dmatimo = 1;
#endif
dev->sc_tcnt = dev->sc_dmanext(dev);
SBIC_TC_PUT(regs, (unsigned)dev->sc_tcnt);
SET_SBIC_cmd(regs, SBIC_CMD_XFER_INFO);
dev->sc_flags |= SBICF_INDMA;
}
break;
case SBIC_CSR_XFERRED|MESG_IN_PHASE:
case SBIC_CSR_MIS|MESG_IN_PHASE:
case SBIC_CSR_MIS_1|MESG_IN_PHASE:
case SBIC_CSR_MIS_2|MESG_IN_PHASE:
SBIC_TRACE(dev);
return sbicmsgin(dev);
case SBIC_CSR_MSGIN_W_ACK:
SET_SBIC_cmd(regs, SBIC_CMD_CLR_ACK); /* Dunno what I'm ACKing */
printf("Acking unknown msgin CSR:%02x",csr);
break;
case SBIC_CSR_XFERRED|MESG_OUT_PHASE:
case SBIC_CSR_MIS|MESG_OUT_PHASE:
case SBIC_CSR_MIS_1|MESG_OUT_PHASE:
case SBIC_CSR_MIS_2|MESG_OUT_PHASE:
#ifdef DEBUG
if (sync_debug)
printf ("sending REJECT msg to last msg.\n");
#endif
sbic_save_ptrs(dev, regs, dev->target, dev->lun);
/*
* should only get here on reject,
* since it's always US that
* initiate a sync transfer
*/
SEND_BYTE(regs, MSG_REJECT);
WAIT_CIP(regs);
if( asr & (SBIC_ASR_BSY|SBIC_ASR_LCI|SBIC_ASR_CIP) )
printf("next: REJECT sent asr %02x\n", asr);
SBIC_TRACE(dev);
return SBIC_STATE_RUNNING;
case SBIC_CSR_DISC:
case SBIC_CSR_DISC_1:
dev->sc_flags &= ~(SBICF_INDMA|SBICF_SELECTED);
/* Try to schedule another target */
#ifdef DEBUG
if(reselect_debug>1)
printf("sbicnext target %d disconnected\n", dev->target);
#endif
TAILQ_INSERT_HEAD(&dev->nexus_list, acb, chain);
++dev->sc_tinfo[dev->target].dconns;
dev->sc_nexus = NULL;
dev->sc_xs = NULL;
if( acb->xs->flags & SCSI_POLL
|| (dev->sc_flags & SBICF_ICMD)
|| !sbic_parallel_operations ) {
SBIC_TRACE(dev);
return SBIC_STATE_DISCONNECT;
}
sbic_sched(dev);
SBIC_TRACE(dev);
return SBIC_STATE_DISCONNECT;
case SBIC_CSR_RSLT_NI:
case SBIC_CSR_RSLT_IFY:
GET_SBIC_rselid(regs, newtarget);
/* check SBIC_RID_SIV? */
newtarget &= SBIC_RID_MASK;
if (csr == SBIC_CSR_RSLT_IFY) {
/* Read IFY msg to avoid lockup */
GET_SBIC_data(regs, newlun);
WAIT_CIP(regs);
newlun &= SBIC_TLUN_MASK;
CSR_TRACE('r',csr,asr,newtarget);
} else {
/* Need to get IFY message */
for (newlun = 256; newlun; --newlun) {
GET_SBIC_asr(regs, asr);
if (asr & SBIC_ASR_INT)
break;
delay(1);
}
newlun = 0; /* XXXX */
if ((asr & SBIC_ASR_INT) == 0) {
#ifdef DEBUG
if (reselect_debug)
printf("RSLT_NI - no IFFY message? asr %x\n", asr);
#endif
} else {
GET_SBIC_csr(regs,csr);
CSR_TRACE('n',csr,asr,newtarget);
if (csr == (SBIC_CSR_MIS | MESG_IN_PHASE) ||
csr == (SBIC_CSR_MIS_1 | MESG_IN_PHASE) ||
csr == (SBIC_CSR_MIS_2 | MESG_IN_PHASE)) {
sbicmsgin(dev);
newlun = dev->sc_msg[0] & 7;
} else {
printf("RSLT_NI - not MESG_IN_PHASE %x\n",
csr);
}
}
}
#ifdef DEBUG
if(reselect_debug>1 || (reselect_debug && csr==SBIC_CSR_RSLT_NI))
printf("sbicnext: reselect %s from targ %d lun %d\n",
csr == SBIC_CSR_RSLT_NI ? "NI" : "IFY",
newtarget, newlun);
#endif
if (dev->sc_nexus) {
#ifdef DEBUG
if (reselect_debug > 1)
printf("%s: reselect %s with active command\n",
dev->sc_dev.dv_xname,
csr == SBIC_CSR_RSLT_NI ? "NI" : "IFY");
#ifdef DDB
/* Debugger();*/
#endif
#endif
TAILQ_INSERT_HEAD(&dev->ready_list, dev->sc_nexus, chain);
dev->sc_tinfo[dev->target].lubusy &= ~(1 << dev->lun);
dev->sc_nexus = NULL;
dev->sc_xs = NULL;
}
/* Reload sync values for this target */
if (dev->sc_sync[newtarget].state == SYNC_DONE)
SET_SBIC_syn(regs, SBIC_SYN (dev->sc_sync[newtarget].offset,
dev->sc_sync[newtarget].period));
else
SET_SBIC_syn(regs, SBIC_SYN (0, sbic_min_period));
for (acb = dev->nexus_list.tqh_first; acb;
acb = acb->chain.tqe_next) {
if (acb->xs->sc_link->scsipi_scsi.target != newtarget ||
acb->xs->sc_link->scsipi_scsi.lun != newlun)
continue;
TAILQ_REMOVE(&dev->nexus_list, acb, chain);
dev->sc_nexus = acb;
dev->sc_xs = acb->xs;
dev->sc_flags |= SBICF_SELECTED;
dev->target = newtarget;
dev->lun = newlun;
break;
}
if (acb == NULL) {
printf("%s: reselect %s targ %d not in nexus_list %p\n",
dev->sc_dev.dv_xname,
csr == SBIC_CSR_RSLT_NI ? "NI" : "IFY", newtarget,
&dev->nexus_list.tqh_first);
panic("bad reselect in sbic");
}
if (csr == SBIC_CSR_RSLT_IFY)
SET_SBIC_cmd(regs, SBIC_CMD_CLR_ACK);
break;
default:
abort:
/*
* Something unexpected happened -- deal with it.
*/
printf("sbicnextstate: aborting csr %02x asr %02x\n", csr, asr);
#ifdef DDB
Debugger();
#endif
#ifdef DEBUG
if( data_pointer_debug > 1 )
printf("next dmastop: %d(%p:%lx)\n",
dev->target,dev->sc_cur->dc_addr,dev->sc_tcnt);
dev->sc_dmatimo = 0;
#endif
dev->sc_dmastop(dev);
SET_SBIC_control(regs, SBIC_CTL_EDI | SBIC_CTL_IDI);
sbicerror(dev, regs, csr);
sbicabort(dev, regs, "next");
if (dev->sc_flags & SBICF_INDMA) {
/*
* check for overlapping cache line, flush if so
*/
#if defined(M68040) || defined(M68060)
if (dev->sc_flags & SBICF_DCFLUSH) {
#if 0
printf("sbic: 68040/060 DMA cache flush needs"
"fixing? %x:%x\n",
dev->sc_xs->data, dev->sc_xs->datalen);
#endif
}
#endif
dev->sc_flags &=
~(SBICF_INDMA | SBICF_DCFLUSH);
#ifdef DEBUG
if( data_pointer_debug > 1 )
printf("next dmastop: %d(%p:%lx)\n",
dev->target,dev->sc_cur->dc_addr,dev->sc_tcnt);
dev->sc_dmatimo = 0;
#endif
dev->sc_dmastop(dev);
sbic_scsidone(acb, -1);
}
SBIC_TRACE(dev);
return SBIC_STATE_ERROR;
}
SBIC_TRACE(dev);
return(SBIC_STATE_RUNNING);
}
/*
* Check if DMA can not be used with specified buffer
*/
int
sbiccheckdmap(bp, len, mask)
void *bp;
u_long len, mask;
{
u_char *buffer;
u_long phy_buf;
u_long phy_len;
buffer = bp;
if (len == 0)
return(0);
while (len) {
phy_buf = kvtop(buffer);
if (len < (phy_len = NBPG - ((int) buffer & PGOFSET)))
phy_len = len;
if (phy_buf & mask)
return(1);
buffer += phy_len;
len -= phy_len;
}
return(0);
}
int
sbictoscsiperiod(dev, regs, a)
struct sbic_softc *dev;
sbic_regmap_t regs;
int a;
{
unsigned int fs;
/*
* cycle = DIV / (2*CLK)
* DIV = FS+2
* best we can do is 200ns at 20Mhz, 2 cycles
*/
GET_SBIC_myid(regs,fs);
fs = (fs >>6) + 2; /* DIV */
fs = (fs * 10000) / (dev->sc_clkfreq<<1); /* Cycle, in ns */
if (a < 2) a = 8; /* map to Cycles */
return ((fs*a)>>2); /* in 4 ns units */
}
int
sbicfromscsiperiod(dev, regs, p)
struct sbic_softc *dev;
sbic_regmap_t regs;
int p;
{
register unsigned int fs, ret;
/* Just the inverse of the above */
GET_SBIC_myid(regs,fs);
fs = (fs >>6) + 2; /* DIV */
fs = (fs * 10000) / (dev->sc_clkfreq<<1); /* Cycle, in ns */
ret = p << 2; /* in ns units */
ret = ret / fs; /* in Cycles */
if (ret < sbic_min_period)
return(sbic_min_period);
/* verify rounding */
if (sbictoscsiperiod(dev, regs, ret) < p)
ret++;
return (ret >= 8) ? 0 : ret;
}
#ifdef DEBUG
void
sbicdumpstate()
{
u_char csr, asr;
GET_SBIC_asr(debug_sbic_regs,asr);
GET_SBIC_csr(debug_sbic_regs,csr);
printf("%s: asr:csr(%02x:%02x)->(%02x:%02x)\n",
(routine==1)?"sbicgo":
(routine==2)?"sbicintr":
(routine==3)?"sbicicmd":
(routine==4)?"sbicnext":"unknown",
debug_asr, debug_csr, asr, csr);
}
void
sbictimeout(dev)
struct sbic_softc *dev;
{
int s, asr;
s = splbio();
if (dev->sc_dmatimo) {
if (dev->sc_dmatimo > 1) {
printf("%s: dma timeout #%d\n",
dev->sc_dev.dv_xname, dev->sc_dmatimo - 1);
GET_SBIC_asr(dev->sc_sbic, asr);
if( asr & SBIC_ASR_INT ) {
/* We need to service a missed IRQ */
printf("Servicing a missed int:(%02x,%02x)->(%02x,??)\n",
debug_asr, debug_csr, asr);
sbicintr(dev);
}
sbicdumpstate();
}
dev->sc_dmatimo++;
}
splx(s);
timeout((void *)sbictimeout, dev, 30 * hz);
}
void
sbic_dump_acb(acb)
struct sbic_acb *acb;
{
u_char *b = (u_char *) &acb->cmd;
int i;
printf("acb@%p ", acb);
if (acb->xs == NULL) {
printf("<unused>\n");
return;
}
printf("(%d:%d) flags %2x clen %2d cmd ",
acb->xs->sc_link->scsipi_scsi.target,
acb->xs->sc_link->scsipi_scsi.lun, acb->flags, acb->clen);
for (i = acb->clen; i; --i)
printf(" %02x", *b++);
printf("\n");
printf(" xs: %8p data %8p:%04x ", acb->xs, acb->xs->data,
acb->xs->datalen);
printf("va %8p:%04x ", acb->sc_kv.dc_addr, acb->sc_kv.dc_count);
printf("pa %8p:%04x tcnt %lx\n", acb->sc_pa.dc_addr, acb->sc_pa.dc_count,
acb->sc_tcnt);
}
void
sbic_dump(dev)
struct sbic_softc *dev;
{
sbic_regmap_t regs;
u_char csr, asr;
struct sbic_acb *acb;
int s;
int i;
s = splbio();
regs = dev->sc_sbic;
#if CSR_TRACE_SIZE
printf("csr trace: ");
i = csr_traceptr;
do {
printf("%c%02x%02x%02x ", csr_trace[i].whr,
csr_trace[i].csr, csr_trace[i].asr, csr_trace[i].xtn);
switch(csr_trace[i].whr) {
case 'g':
printf("go "); break;
case 's':
printf("select "); break;
case 'y':
printf("select+ "); break;
case 'i':
printf("intr "); break;
case 'f':
printf("finish "); break;
case '>':
printf("out "); break;
case '<':
printf("in "); break;
case 'm':
printf("msgin "); break;
case 'x':
printf("msginx "); break;
case 'X':
printf("msginX "); break;
case 'r':
printf("reselect "); break;
case 'I':
printf("icmd "); break;
case 'a':
printf("abort "); break;
default:
printf("? ");
}
switch(csr_trace[i].csr) {
case 0x11:
printf("INITIATOR"); break;
case 0x16:
printf("S_XFERRED"); break;
case 0x20:
printf("MSGIN_ACK"); break;
case 0x41:
printf("DISC"); break;
case 0x42:
printf("SEL_TIMEO"); break;
case 0x80:
printf("RSLT_NI"); break;
case 0x81:
printf("RSLT_IFY"); break;
case 0x85:
printf("DISC_1"); break;
case 0x18: case 0x19: case 0x1a:
case 0x1b: case 0x1e: case 0x1f:
case 0x28: case 0x29: case 0x2a:
case 0x2b: case 0x2e: case 0x2f:
case 0x48: case 0x49: case 0x4a:
case 0x4b: case 0x4e: case 0x4f:
case 0x88: case 0x89: case 0x8a:
case 0x8b: case 0x8e: case 0x8f:
switch(csr_trace[i].csr & 0xf0) {
case 0x10:
printf("DONE_"); break;
case 0x20:
printf("STOP_"); break;
case 0x40:
printf("ERR_"); break;
case 0x80:
printf("REQ_"); break;
}
switch(csr_trace[i].csr & 7) {
case 0:
printf("DATA_OUT"); break;
case 1:
printf("DATA_IN"); break;
case 2:
printf("CMD"); break;
case 3:
printf("STATUS"); break;
case 6:
printf("MSG_OUT"); break;
case 7:
printf("MSG_IN"); break;
default:
printf("invld phs");
}
break;
default: printf("****"); break;
}
if (csr_trace[i].asr & SBIC_ASR_INT)
printf(" ASR_INT");
if (csr_trace[i].asr & SBIC_ASR_LCI)
printf(" ASR_LCI");
if (csr_trace[i].asr & SBIC_ASR_BSY)
printf(" ASR_BSY");
if (csr_trace[i].asr & SBIC_ASR_CIP)
printf(" ASR_CIP");
printf("\n");
i = (i + 1) & (CSR_TRACE_SIZE - 1);
} while (i != csr_traceptr);
#endif
GET_SBIC_asr(regs, asr);
if ((asr & SBIC_ASR_INT) == 0)
GET_SBIC_csr(regs, csr);
else
csr = 0;
printf("%s@%p regs %p asr %x csr %x\n", dev->sc_dev.dv_xname,
dev, regs, asr, csr);
if ((acb = dev->free_list.tqh_first)) {
printf("Free list:\n");
while (acb) {
sbic_dump_acb(acb);
acb = acb->chain.tqe_next;
}
}
if ((acb = dev->ready_list.tqh_first)) {
printf("Ready list:\n");
while (acb) {
sbic_dump_acb(acb);
acb = acb->chain.tqe_next;
}
}
if ((acb = dev->nexus_list.tqh_first)) {
printf("Nexus list:\n");
while (acb) {
sbic_dump_acb(acb);
acb = acb->chain.tqe_next;
}
}
if (dev->sc_nexus) {
printf("nexus:\n");
sbic_dump_acb(dev->sc_nexus);
}
printf("sc_xs %p targ %d lun %d flags %x tcnt %lx dmacmd %x mask %lx\n",
dev->sc_xs, dev->target, dev->lun, dev->sc_flags, dev->sc_tcnt,
dev->sc_dmacmd, dev->sc_dmamask);
for (i = 0; i < 8; ++i) {
if (dev->sc_tinfo[i].cmds > 2) {
printf("tgt %d: cmds %d disc %d senses %d lubusy %x\n",
i, dev->sc_tinfo[i].cmds,
dev->sc_tinfo[i].dconns,
dev->sc_tinfo[i].senses,
dev->sc_tinfo[i].lubusy);
}
}
splx(s);
}
#endif
Reference in New Issue View Git Blame Copy Permalink