Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/isa/smsc.c

374 lines
9.7 KiB
C
Raw Blame History

/* $NetBSD: smsc.c,v 1.12 2015/04/23 23:23:00 pgoyette Exp $ */
/*-
* Copyright (c) 2007 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Brett Lymn.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* This is a driver for the Standard Microsystems Corp (SMSC)
* LPC47B397 "super i/o" chip. This driver only handles the environment
* monitoring capabilities of the chip, the other functions will be
* probed/matched as "normal" PC hardware devices (serial ports, fdc, so on).
* SMSC has not deigned to release a datasheet for this particular chip
* (though they do for others they make) so this driver was written from
* information contained in the comment block for the Linux driver.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: smsc.c,v 1.12 2015/04/23 23:23:00 pgoyette Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <dev/isa/isareg.h>
#include <dev/isa/isavar.h>
#include <dev/sysmon/sysmonvar.h>
#include <dev/isa/smscvar.h>
#if defined(LMDEBUG)
#define DPRINTF(x) do { printf x; } while (0)
#else
#define DPRINTF(x)
#endif
static int smsc_match(device_t, cfdata_t, void *);
static void smsc_attach(device_t, device_t, void *);
static int smsc_detach(device_t, int);
static uint8_t smsc_readreg(bus_space_tag_t, bus_space_handle_t, int);
static void smsc_writereg(bus_space_tag_t, bus_space_handle_t, int, int);
static void smsc_refresh(struct sysmon_envsys *, envsys_data_t *);
CFATTACH_DECL_NEW(smsc, sizeof(struct smsc_softc),
smsc_match, smsc_attach, smsc_detach, NULL);
/*
* Probe for the SMSC Super I/O chip
*/
static int
smsc_match(device_t parent, cfdata_t match, void *aux)
{
bus_space_handle_t ioh;
struct isa_attach_args *ia = aux;
int rv;
uint8_t cr;
/* Must supply an address */
if (ia->ia_nio < 1)
return 0;
if (ISA_DIRECT_CONFIG(ia))
return 0;
if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT)
return 0;
if (bus_space_map(ia->ia_iot, ia->ia_io[0].ir_addr, 2, 0, &ioh))
return 0;
/* To get the device ID we must enter config mode... */
bus_space_write_1(ia->ia_iot, ioh, SMSC_ADDR, SMSC_CONFIG_START);
/* Then select the device id register */
cr = smsc_readreg(ia->ia_iot, ioh, SMSC_DEVICE_ID);
/* Exit config mode, apparently this is important to do */
bus_space_write_1(ia->ia_iot, ioh, SMSC_ADDR, SMSC_CONFIG_END);
switch (cr) {
case SMSC_ID_47B397:
case SMSC_ID_SCH5307NS:
case SMSC_ID_SCH5317:
rv = 1;
break;
default:
rv = 0;
break;
}
DPRINTF(("smsc: rv = %d, cr = %x\n", rv, cr));
bus_space_unmap(ia->ia_iot, ioh, 2);
if (rv) {
ia->ia_nio = 1;
ia->ia_io[0].ir_size = 2;
ia->ia_niomem = 0;
ia->ia_nirq = 0;
ia->ia_ndrq = 0;
}
return rv;
}
/*
* Get the base address for the monitoring registers and set up the
* sysmon_envsys(9) framework.
*/
static void
smsc_attach(device_t parent, device_t self, void *aux)
{
struct smsc_softc *sc = device_private(self);
struct isa_attach_args *ia = aux;
bus_space_handle_t ioh;
uint8_t rev, msb, lsb, chipid;
unsigned address;
int i;
sc->sc_iot = ia->ia_iot;
aprint_naive("\n");
/*
* To attach we need to find the actual Hardware Monitor
* I/O address space.
*/
if (bus_space_map(ia->ia_iot, ia->ia_io[0].ir_addr, 2, 0,
&ioh)) {
aprint_error(": can't map base i/o space\n");
return;
}
/* Enter config mode */
bus_space_write_1(ia->ia_iot, ioh, SMSC_ADDR, SMSC_CONFIG_START);
/*
* While we have the base registers mapped, grab the chip
* revision and device ID.
*/
rev = smsc_readreg(ia->ia_iot, ioh, SMSC_DEVICE_REVISION);
chipid = smsc_readreg(ia->ia_iot, ioh, SMSC_DEVICE_ID);
/* Select the Hardware Monitor LDN */
smsc_writereg(ia->ia_iot, ioh, SMSC_LOGICAL_DEV_SEL,
SMSC_LOGICAL_DEVICE);
/* Read the base address for the registers. */
msb = smsc_readreg(ia->ia_iot, ioh, SMSC_IO_BASE_MSB);
lsb = smsc_readreg(ia->ia_iot, ioh, SMSC_IO_BASE_LSB);
address = (msb << 8) | lsb;
/* Exit config mode */
bus_space_write_1(ia->ia_iot, ioh, SMSC_ADDR, SMSC_CONFIG_END);
bus_space_unmap(ia->ia_iot, ioh, 2);
/* Map the Hardware Monitor I/O space. */
if (bus_space_map(ia->ia_iot, address, 2, 0, &sc->sc_ioh)) {
aprint_error(": can't map register i/o space\n");
return;
}
sc->sc_sme = sysmon_envsys_create();
#define INITSENSOR(index, string, reg, type) \
do { \
strlcpy(sc->sc_sensor[index].desc, string, \
sizeof(sc->sc_sensor[index].desc)); \
sc->sc_sensor[index].units = type; \
sc->sc_regs[index] = reg; \
sc->sc_sensor[index].state = ENVSYS_SVALID; \
} while (/* CONSTCOND */ 0)
/* Temperature sensors */
INITSENSOR(0, "Temp0", SMSC_TEMP1, ENVSYS_STEMP);
INITSENSOR(1, "Temp1", SMSC_TEMP2, ENVSYS_STEMP);
INITSENSOR(2, "Temp2", SMSC_TEMP3, ENVSYS_STEMP);
INITSENSOR(3, "Temp3", SMSC_TEMP4, ENVSYS_STEMP);
/* Fan sensors */
INITSENSOR(4, "Fan0", SMSC_FAN1_LSB, ENVSYS_SFANRPM);
INITSENSOR(5, "Fan1", SMSC_FAN2_LSB, ENVSYS_SFANRPM);
INITSENSOR(6, "Fan2", SMSC_FAN3_LSB, ENVSYS_SFANRPM);
INITSENSOR(7, "Fan3", SMSC_FAN4_LSB, ENVSYS_SFANRPM);
for (i = 0; i < SMSC_MAX_SENSORS; i++) {
sc->sc_sensor[i].state = ENVSYS_SINVALID;
if (sysmon_envsys_sensor_attach(sc->sc_sme,
&sc->sc_sensor[i])) {
sysmon_envsys_destroy(sc->sc_sme);
bus_space_unmap(sc->sc_iot, sc->sc_ioh, 2);
return;
}
}
sc->sc_sme->sme_name = device_xname(self);
sc->sc_sme->sme_cookie = sc;
sc->sc_sme->sme_refresh = smsc_refresh;
if ((i = sysmon_envsys_register(sc->sc_sme)) != 0) {
aprint_error(": unable to register with sysmon (%d)\n", i);
sysmon_envsys_destroy(sc->sc_sme);
bus_space_unmap(sc->sc_iot, sc->sc_ioh, 2);
return;
}
switch (chipid) {
case SMSC_ID_47B397:
aprint_normal(": SMSC LPC47B397 Super I/O");
break;
case SMSC_ID_SCH5307NS:
aprint_normal(": SMSC SCH5307-NS Super I/O");
break;
case SMSC_ID_SCH5317:
aprint_normal(": SMSC SCH5317 Super I/O");
break;
}
aprint_normal(" (rev %u)\n", rev);
aprint_normal_dev(self, "Hardware Monitor registers at 0x%04x\n",
address);
}
static int
smsc_detach(device_t self, int flags)
{
struct smsc_softc *sc = device_private(self);
sysmon_envsys_unregister(sc->sc_sme);
bus_space_unmap(sc->sc_iot, sc->sc_ioh, 2);
return 0;
}
/*
* Read the value of the given register
*/
static uint8_t
smsc_readreg(bus_space_tag_t iot, bus_space_handle_t ioh, int reg)
{
bus_space_write_1(iot, ioh, SMSC_ADDR, reg);
return bus_space_read_1(iot, ioh, SMSC_DATA);
}
/*
* Write the given value to the given register.
*/
static void
smsc_writereg(bus_space_tag_t iot, bus_space_handle_t ioh, int reg, int val)
{
bus_space_write_1(iot, ioh, SMSC_ADDR, reg);
bus_space_write_1(iot, ioh, SMSC_DATA, val);
}
/* convert temperature read from the chip to micro kelvin */
static inline int
smsc_temp2muk(uint8_t t)
{
int temp=t;
return temp * 1000000 + 273150000U;
}
/*
* convert register value read from chip into rpm using:
*
* RPM = 60/(Count * 11.111us)
*
* 1/1.1111us = 90kHz
*
*/
static inline int
smsc_reg2rpm(unsigned int r)
{
unsigned long rpm;
if (r == 0x0)
return 0;
rpm = (90000 * 60) / ((unsigned long) r);
return (int) rpm;
}
/* min and max temperatures in uK */
#define SMSC_MIN_TEMP_UK ((-127 * 1000000) + 273150000)
#define SMSC_MAX_TEMP_UK ((127 * 1000000) + 273150000)
/*
* Get the data for the requested sensor, update the sysmon structure
* with the retrieved value.
*/
static void
smsc_refresh(struct sysmon_envsys *sme, envsys_data_t *edata)
{
struct smsc_softc *sc = sme->sme_cookie;
int reg;
unsigned int rpm;
uint8_t msb, lsb;
reg = sc->sc_regs[edata->sensor];
switch (edata->units) {
case ENVSYS_STEMP:
edata->value_cur =
smsc_temp2muk(smsc_readreg(sc->sc_iot, sc->sc_ioh, reg));
break;
case ENVSYS_SFANRPM:
/* reading lsb first locks msb... */
lsb = smsc_readreg(sc->sc_iot, sc->sc_ioh, reg);
msb = smsc_readreg(sc->sc_iot, sc->sc_ioh, reg + 1);
rpm = (msb << 8) | lsb;
edata->value_cur = smsc_reg2rpm(rpm);
break;
}
}
MODULE(MODULE_CLASS_DRIVER, smsc, "sysmon_envsys");
#ifdef _MODULE
#include "ioconf.c"
#endif
static int
smsc_modcmd(modcmd_t cmd, void *opaque)
{
int error = 0;
switch (cmd) {
case MODULE_CMD_INIT:
#ifdef _MODULE
error = config_init_component(cfdriver_ioconf_smsc,
cfattach_ioconf_smsc, cfdata_ioconf_smsc);
#endif
return error;
case MODULE_CMD_FINI:
#ifdef _MODULE
error = config_fini_component(cfdriver_ioconf_smsc,
cfattach_ioconf_smsc, cfdata_ioconf_smsc);
#endif
return error;
default:
return ENOTTY;
}
}
Reference in New Issue View Git Blame Copy Permalink