669 lines
17 KiB
C
669 lines
17 KiB
C
/* $NetBSD: lsi64854.c,v 1.39 2018/09/03 16:29:31 riastradh Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Paul Kranenburg.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: lsi64854.c,v 1.39 2018/09/03 16:29:31 riastradh Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/device.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <machine/autoconf.h>
|
|
#include <sys/cpu.h>
|
|
|
|
#include <dev/scsipi/scsi_all.h>
|
|
#include <dev/scsipi/scsipi_all.h>
|
|
#include <dev/scsipi/scsiconf.h>
|
|
|
|
#include <dev/ic/lsi64854reg.h>
|
|
#include <dev/ic/lsi64854var.h>
|
|
|
|
#include <dev/ic/ncr53c9xreg.h>
|
|
#include <dev/ic/ncr53c9xvar.h>
|
|
|
|
void lsi64854_reset(struct lsi64854_softc *);
|
|
int lsi64854_setup(struct lsi64854_softc *, uint8_t **, size_t *,
|
|
int, size_t *);
|
|
int lsi64854_setup_pp(struct lsi64854_softc *, uint8_t **, size_t *,
|
|
int, size_t *);
|
|
|
|
#ifdef DEBUG
|
|
#define LDB_SCSI 1
|
|
#define LDB_ENET 2
|
|
#define LDB_PP 4
|
|
#define LDB_ANY 0xff
|
|
int lsi64854debug = 0;
|
|
#define DPRINTF(a,x) do { if (lsi64854debug & (a)) printf x ; } while (0)
|
|
#else
|
|
#define DPRINTF(a,x)
|
|
#endif
|
|
|
|
#define MAX_DMA_SZ (16 * 1024 * 1024)
|
|
|
|
/*
|
|
* Finish attaching this DMA device.
|
|
* Front-end must fill in these fields:
|
|
* sc_bustag
|
|
* sc_dmatag
|
|
* sc_regs
|
|
* sc_burst
|
|
* sc_channel (one of SCSI, ENET, PP)
|
|
* sc_client (one of SCSI, ENET, PP `soft_c' pointers)
|
|
*/
|
|
void
|
|
lsi64854_attach(struct lsi64854_softc *sc)
|
|
{
|
|
uint32_t csr;
|
|
|
|
/* Indirect functions */
|
|
switch (sc->sc_channel) {
|
|
case L64854_CHANNEL_SCSI:
|
|
sc->intr = lsi64854_scsi_intr;
|
|
sc->setup = lsi64854_setup;
|
|
break;
|
|
case L64854_CHANNEL_ENET:
|
|
sc->intr = lsi64854_enet_intr;
|
|
break;
|
|
case L64854_CHANNEL_PP:
|
|
sc->setup = lsi64854_setup_pp;
|
|
break;
|
|
default:
|
|
aprint_error(": unknown channel");
|
|
}
|
|
sc->reset = lsi64854_reset;
|
|
|
|
/* Allocate a dmamap */
|
|
if (bus_dmamap_create(sc->sc_dmatag, MAX_DMA_SZ, 1, MAX_DMA_SZ,
|
|
0, BUS_DMA_WAITOK, &sc->sc_dmamap) != 0) {
|
|
aprint_error(": DMA map create failed\n");
|
|
return;
|
|
}
|
|
|
|
csr = L64854_GCSR(sc);
|
|
sc->sc_rev = csr & L64854_DEVID;
|
|
if (sc->sc_rev == DMAREV_HME) {
|
|
return;
|
|
}
|
|
aprint_normal(": DMA rev ");
|
|
switch (sc->sc_rev) {
|
|
case DMAREV_0:
|
|
aprint_normal("0");
|
|
break;
|
|
case DMAREV_ESC:
|
|
aprint_normal("esc");
|
|
break;
|
|
case DMAREV_1:
|
|
aprint_normal("1");
|
|
break;
|
|
case DMAREV_PLUS:
|
|
aprint_normal("1+");
|
|
break;
|
|
case DMAREV_2:
|
|
aprint_normal("2");
|
|
break;
|
|
default:
|
|
aprint_normal("unknown (0x%x)", sc->sc_rev);
|
|
}
|
|
|
|
DPRINTF(LDB_ANY, (", burst 0x%x, csr 0x%x", sc->sc_burst, csr));
|
|
aprint_normal("\n");
|
|
}
|
|
|
|
/*
|
|
* DMAWAIT waits while condition is true
|
|
*/
|
|
#define DMAWAIT(SC, COND, MSG, DONTPANIC) do if (COND) { \
|
|
int count = 500000; \
|
|
while ((COND) && --count > 0) DELAY(1); \
|
|
if (count == 0) { \
|
|
printf("%s: line %d: CSR = 0x%lx\n", __FILE__, __LINE__, \
|
|
(u_long)L64854_GCSR(SC)); \
|
|
if (DONTPANIC) \
|
|
printf(MSG); \
|
|
else \
|
|
panic(MSG); \
|
|
} \
|
|
} while (/* CONSTCOND */ 0)
|
|
|
|
#define DMA_DRAIN(sc, dontpanic) do { \
|
|
uint32_t _csr; \
|
|
/* \
|
|
* DMA rev0 & rev1: we are not allowed to touch the DMA "flush" \
|
|
* and "drain" bits while it is still thinking about a \
|
|
* request. \
|
|
* other revs: D_ESC_R_PEND bit reads as 0 \
|
|
*/ \
|
|
DMAWAIT(sc, L64854_GCSR(sc) & D_ESC_R_PEND, "R_PEND", dontpanic);\
|
|
if (sc->sc_rev != DMAREV_HME) { \
|
|
/* \
|
|
* Select drain bit based on revision \
|
|
* also clears errors and D_TC flag \
|
|
*/ \
|
|
_csr = L64854_GCSR(sc); \
|
|
if (sc->sc_rev == DMAREV_1 || sc->sc_rev == DMAREV_0) \
|
|
_csr |= D_ESC_DRAIN; \
|
|
else \
|
|
_csr |= L64854_INVALIDATE; \
|
|
\
|
|
L64854_SCSR(sc,_csr); \
|
|
} \
|
|
/* \
|
|
* Wait for draining to finish \
|
|
* rev0 & rev1 call this PACKCNT \
|
|
*/ \
|
|
DMAWAIT(sc, L64854_GCSR(sc) & L64854_DRAINING, "DRAINING", dontpanic);\
|
|
} while (/* CONSTCOND */ 0)
|
|
|
|
#define DMA_FLUSH(sc, dontpanic) do { \
|
|
uint32_t _csr; \
|
|
/* \
|
|
* DMA rev0 & rev1: we are not allowed to touch the DMA "flush" \
|
|
* and "drain" bits while it is still thinking about a \
|
|
* request. \
|
|
* other revs: D_ESC_R_PEND bit reads as 0 \
|
|
*/ \
|
|
DMAWAIT(sc, L64854_GCSR(sc) & D_ESC_R_PEND, "R_PEND", dontpanic);\
|
|
_csr = L64854_GCSR(sc); \
|
|
_csr &= ~(L64854_WRITE | L64854_EN_DMA); /* no-ops on ENET */ \
|
|
_csr |= L64854_INVALIDATE; /* XXX FAS ? */ \
|
|
L64854_SCSR(sc,_csr); \
|
|
} while (/* CONSTCOND */ 0)
|
|
|
|
void
|
|
lsi64854_reset(struct lsi64854_softc *sc)
|
|
{
|
|
uint32_t csr;
|
|
|
|
DMA_FLUSH(sc, 1);
|
|
csr = L64854_GCSR(sc);
|
|
|
|
DPRINTF(LDB_ANY, ("%s: csr 0x%x\n", __func__, csr));
|
|
|
|
/*
|
|
* XXX is sync needed?
|
|
*/
|
|
if (sc->sc_dmamap->dm_nsegs > 0)
|
|
bus_dmamap_unload(sc->sc_dmatag, sc->sc_dmamap);
|
|
|
|
if (sc->sc_rev == DMAREV_HME)
|
|
L64854_SCSR(sc, csr | D_HW_RESET_FAS366);
|
|
|
|
|
|
csr |= L64854_RESET; /* reset DMA */
|
|
L64854_SCSR(sc, csr);
|
|
DELAY(200); /* > 10 Sbus clocks(?) */
|
|
|
|
/*DMAWAIT1(sc); why was this here? */
|
|
csr = L64854_GCSR(sc);
|
|
csr &= ~L64854_RESET; /* de-assert reset line */
|
|
L64854_SCSR(sc, csr);
|
|
DELAY(5); /* allow a few ticks to settle */
|
|
|
|
csr = L64854_GCSR(sc);
|
|
csr |= L64854_INT_EN; /* enable interrupts */
|
|
if (sc->sc_rev > DMAREV_1 && sc->sc_channel == L64854_CHANNEL_SCSI) {
|
|
if (sc->sc_rev == DMAREV_HME)
|
|
csr |= D_TWO_CYCLE;
|
|
else
|
|
csr |= D_FASTER;
|
|
}
|
|
|
|
/* Set burst */
|
|
switch (sc->sc_rev) {
|
|
case DMAREV_HME:
|
|
case DMAREV_2:
|
|
csr &= ~L64854_BURST_SIZE;
|
|
if (sc->sc_burst == 32) {
|
|
csr |= L64854_BURST_32;
|
|
} else if (sc->sc_burst == 16) {
|
|
csr |= L64854_BURST_16;
|
|
} else {
|
|
csr |= L64854_BURST_0;
|
|
}
|
|
break;
|
|
case DMAREV_ESC:
|
|
csr |= D_ESC_AUTODRAIN; /* Auto-drain */
|
|
if (sc->sc_burst == 32) {
|
|
csr &= ~D_ESC_BURST;
|
|
} else
|
|
csr |= D_ESC_BURST;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
L64854_SCSR(sc, csr);
|
|
|
|
if (sc->sc_rev == DMAREV_HME) {
|
|
bus_space_write_4(sc->sc_bustag, sc->sc_regs,
|
|
L64854_REG_ADDR, 0);
|
|
sc->sc_dmactl = csr;
|
|
}
|
|
sc->sc_active = 0;
|
|
|
|
DPRINTF(LDB_ANY, ("%s: done, csr 0x%x\n", __func__, csr));
|
|
}
|
|
|
|
|
|
#define DMAMAX(a) (MAX_DMA_SZ - ((a) & (MAX_DMA_SZ-1)))
|
|
/*
|
|
* setup a DMA transfer
|
|
*/
|
|
int
|
|
lsi64854_setup(struct lsi64854_softc *sc, uint8_t **addr, size_t *len,
|
|
int datain, size_t *dmasize)
|
|
{
|
|
uint32_t csr;
|
|
|
|
DMA_FLUSH(sc, 0);
|
|
|
|
#if 0
|
|
DMACSR(sc) &= ~D_INT_EN;
|
|
#endif
|
|
sc->sc_dmaaddr = addr;
|
|
sc->sc_dmalen = len;
|
|
|
|
/*
|
|
* the rules say we cannot transfer more than the limit
|
|
* of this DMA chip (64k for old and 16Mb for new),
|
|
* and we cannot cross a 16Mb boundary.
|
|
*/
|
|
*dmasize = sc->sc_dmasize =
|
|
uimin(*dmasize, DMAMAX((size_t)*sc->sc_dmaaddr));
|
|
|
|
DPRINTF(LDB_ANY, ("%s: dmasize = %ld\n",
|
|
__func__, (long)sc->sc_dmasize));
|
|
|
|
/*
|
|
* XXX what length?
|
|
*/
|
|
if (sc->sc_rev == DMAREV_HME) {
|
|
|
|
L64854_SCSR(sc, sc->sc_dmactl | L64854_RESET);
|
|
L64854_SCSR(sc, sc->sc_dmactl);
|
|
|
|
bus_space_write_4(sc->sc_bustag, sc->sc_regs,
|
|
L64854_REG_CNT, *dmasize);
|
|
}
|
|
|
|
/* Program the DMA address */
|
|
if (sc->sc_dmasize) {
|
|
sc->sc_dvmaaddr = *sc->sc_dmaaddr;
|
|
if (bus_dmamap_load(sc->sc_dmatag, sc->sc_dmamap,
|
|
*sc->sc_dmaaddr, sc->sc_dmasize,
|
|
NULL /* kernel address */,
|
|
BUS_DMA_NOWAIT | BUS_DMA_STREAMING))
|
|
panic("%s: cannot allocate DVMA address",
|
|
device_xname(sc->sc_dev));
|
|
bus_dmamap_sync(sc->sc_dmatag, sc->sc_dmamap, 0, sc->sc_dmasize,
|
|
datain ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
|
|
bus_space_write_4(sc->sc_bustag, sc->sc_regs, L64854_REG_ADDR,
|
|
sc->sc_dmamap->dm_segs[0].ds_addr);
|
|
}
|
|
|
|
if (sc->sc_rev == DMAREV_ESC) {
|
|
/* DMA ESC chip bug work-around */
|
|
long bcnt = sc->sc_dmasize;
|
|
long eaddr = bcnt + (long)*sc->sc_dmaaddr;
|
|
|
|
if ((eaddr & PGOFSET) != 0)
|
|
bcnt = roundup(bcnt, PAGE_SIZE);
|
|
bus_space_write_4(sc->sc_bustag, sc->sc_regs, L64854_REG_CNT,
|
|
bcnt);
|
|
}
|
|
|
|
/* Setup DMA control register */
|
|
csr = L64854_GCSR(sc);
|
|
|
|
if (datain)
|
|
csr |= L64854_WRITE;
|
|
else
|
|
csr &= ~L64854_WRITE;
|
|
csr |= L64854_INT_EN;
|
|
|
|
if (sc->sc_rev == DMAREV_HME) {
|
|
csr |= (D_DSBL_SCSI_DRN | D_EN_DMA);
|
|
}
|
|
|
|
L64854_SCSR(sc, csr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Pseudo (chained) interrupt from the esp driver to kick the
|
|
* current running DMA transfer. Called from ncr53c9x_intr()
|
|
* for now.
|
|
*
|
|
* return 1 if it was a DMA continue.
|
|
*/
|
|
int
|
|
lsi64854_scsi_intr(void *arg)
|
|
{
|
|
struct lsi64854_softc *sc = arg;
|
|
struct ncr53c9x_softc *nsc = sc->sc_client;
|
|
char bits[64];
|
|
int trans, resid;
|
|
uint32_t csr;
|
|
|
|
csr = L64854_GCSR(sc);
|
|
#ifdef DEBUG
|
|
snprintb(bits, sizeof(bits), DDMACSR_BITS, csr);
|
|
#endif
|
|
DPRINTF(LDB_SCSI, ("%s: %s: addr 0x%x, csr %s\n",
|
|
device_xname(sc->sc_dev), __func__,
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_regs, L64854_REG_ADDR),
|
|
bits));
|
|
|
|
|
|
if (csr & (D_ERR_PEND|D_SLAVE_ERR)) {
|
|
snprintb(bits, sizeof(bits), DDMACSR_BITS, csr);
|
|
printf("%s: error: csr=%s\n", device_xname(sc->sc_dev), bits);
|
|
csr &= ~D_EN_DMA; /* Stop DMA */
|
|
/* Invalidate the queue; SLAVE_ERR bit is write-to-clear */
|
|
csr |= D_INVALIDATE|D_SLAVE_ERR;
|
|
L64854_SCSR(sc, csr);
|
|
return -1;
|
|
}
|
|
|
|
/* This is an "assertion" :) */
|
|
if (sc->sc_active == 0)
|
|
panic("%s: DMA wasn't active", __func__);
|
|
|
|
DMA_DRAIN(sc, 0);
|
|
|
|
/* DMA has stopped */
|
|
csr &= ~D_EN_DMA;
|
|
L64854_SCSR(sc, csr);
|
|
sc->sc_active = 0;
|
|
|
|
if (sc->sc_dmasize == 0) {
|
|
/* A "Transfer Pad" operation completed */
|
|
DPRINTF(LDB_SCSI, ("%s: discarded %d bytes (tcl=%d, tcm=%d)\n",
|
|
__func__,
|
|
NCR_READ_REG(nsc, NCR_TCL) |
|
|
(NCR_READ_REG(nsc, NCR_TCM) << 8),
|
|
NCR_READ_REG(nsc, NCR_TCL),
|
|
NCR_READ_REG(nsc, NCR_TCM)));
|
|
return 0;
|
|
}
|
|
|
|
resid = 0;
|
|
/*
|
|
* If a transfer onto the SCSI bus gets interrupted by the device
|
|
* (e.g. for a SAVEPOINTER message), the data in the FIFO counts
|
|
* as residual since the NCR53C9X counter registers get decremented
|
|
* as bytes are clocked into the FIFO.
|
|
*/
|
|
if (!(csr & D_WRITE) &&
|
|
(resid = (NCR_READ_REG(nsc, NCR_FFLAG) & NCRFIFO_FF)) != 0) {
|
|
DPRINTF(LDB_SCSI, ("%s: empty esp FIFO of %d ",
|
|
__func__, resid));
|
|
if (nsc->sc_rev == NCR_VARIANT_FAS366 &&
|
|
(NCR_READ_REG(nsc, NCR_CFG3) & NCRFASCFG3_EWIDE))
|
|
resid <<= 1;
|
|
}
|
|
|
|
if ((nsc->sc_espstat & NCRSTAT_TC) == 0) {
|
|
/*
|
|
* `Terminal count' is off, so read the residue
|
|
* out of the NCR53C9X counter registers.
|
|
*/
|
|
resid += (NCR_READ_REG(nsc, NCR_TCL) |
|
|
(NCR_READ_REG(nsc, NCR_TCM) << 8) |
|
|
((nsc->sc_cfg2 & NCRCFG2_FE) ?
|
|
(NCR_READ_REG(nsc, NCR_TCH) << 16) : 0));
|
|
|
|
if (resid == 0 && sc->sc_dmasize == 65536 &&
|
|
(nsc->sc_cfg2 & NCRCFG2_FE) == 0)
|
|
/* A transfer of 64K is encoded as `TCL=TCM=0' */
|
|
resid = 65536;
|
|
}
|
|
|
|
trans = sc->sc_dmasize - resid;
|
|
if (trans < 0) { /* transferred < 0 ? */
|
|
#if 0
|
|
/*
|
|
* This situation can happen in perfectly normal operation
|
|
* if the ESP is reselected while using DMA to select
|
|
* another target. As such, don't print the warning.
|
|
*/
|
|
printf("%s: xfer (%d) > req (%d)\n",
|
|
device_xname(sc->sc_dev), trans, sc->sc_dmasize);
|
|
#endif
|
|
trans = sc->sc_dmasize;
|
|
}
|
|
|
|
DPRINTF(LDB_SCSI, ("%s: tcl=%d, tcm=%d, tch=%d; trans=%d, resid=%d\n",
|
|
__func__,
|
|
NCR_READ_REG(nsc, NCR_TCL),
|
|
NCR_READ_REG(nsc, NCR_TCM),
|
|
(nsc->sc_cfg2 & NCRCFG2_FE) ?
|
|
NCR_READ_REG(nsc, NCR_TCH) : 0,
|
|
trans, resid));
|
|
|
|
if (sc->sc_dmamap->dm_nsegs > 0) {
|
|
bus_dmamap_sync(sc->sc_dmatag, sc->sc_dmamap, 0, sc->sc_dmasize,
|
|
(csr & D_WRITE) != 0 ?
|
|
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sc_dmatag, sc->sc_dmamap);
|
|
}
|
|
|
|
*sc->sc_dmalen -= trans;
|
|
*sc->sc_dmaaddr += trans;
|
|
|
|
#if 0 /* this is not normal operation just yet */
|
|
if (*sc->sc_dmalen == 0 ||
|
|
nsc->sc_phase != nsc->sc_prevphase)
|
|
return 0;
|
|
|
|
/* and again */
|
|
dma_start(sc, sc->sc_dmaaddr, sc->sc_dmalen, DMACSR(sc) & D_WRITE);
|
|
return 1;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Pseudo (chained) interrupt to le driver to handle DMA errors.
|
|
*/
|
|
int
|
|
lsi64854_enet_intr(void *arg)
|
|
{
|
|
struct lsi64854_softc *sc = arg;
|
|
char bits[64];
|
|
uint32_t csr;
|
|
static int dodrain = 0;
|
|
int rv;
|
|
|
|
csr = L64854_GCSR(sc);
|
|
|
|
/* If the DMA logic shows an interrupt, claim it */
|
|
rv = ((csr & E_INT_PEND) != 0) ? 1 : 0;
|
|
|
|
if (csr & (E_ERR_PEND|E_SLAVE_ERR)) {
|
|
snprintb(bits, sizeof(bits), EDMACSR_BITS, csr);
|
|
printf("%s: error: csr=%s\n", device_xname(sc->sc_dev), bits);
|
|
csr &= ~L64854_EN_DMA; /* Stop DMA */
|
|
/* Invalidate the queue; SLAVE_ERR bit is write-to-clear */
|
|
csr |= E_INVALIDATE|E_SLAVE_ERR;
|
|
L64854_SCSR(sc, csr);
|
|
DMA_RESET(sc);
|
|
dodrain = 1;
|
|
return 1;
|
|
}
|
|
|
|
if (dodrain) { /* XXX - is this necessary with D_DSBL_WRINVAL on? */
|
|
int i = 10;
|
|
csr |= E_DRAIN;
|
|
L64854_SCSR(sc, csr);
|
|
while (i-- > 0 && (L64854_GCSR(sc) & D_DRAINING))
|
|
delay(1);
|
|
}
|
|
|
|
return rv | (*sc->sc_intrchain)(sc->sc_intrchainarg);
|
|
}
|
|
|
|
/*
|
|
* setup a DMA transfer
|
|
*/
|
|
int
|
|
lsi64854_setup_pp(struct lsi64854_softc *sc, uint8_t **addr, size_t *len,
|
|
int datain, size_t *dmasize)
|
|
{
|
|
uint32_t csr;
|
|
|
|
DMA_FLUSH(sc, 0);
|
|
|
|
sc->sc_dmaaddr = addr;
|
|
sc->sc_dmalen = len;
|
|
|
|
DPRINTF(LDB_PP, ("%s: pp start %ld@%p,%d\n", device_xname(sc->sc_dev),
|
|
(long)*sc->sc_dmalen, *sc->sc_dmaaddr, datain ? 1 : 0));
|
|
|
|
/*
|
|
* the rules say we cannot transfer more than the limit
|
|
* of this DMA chip (64k for old and 16Mb for new),
|
|
* and we cannot cross a 16Mb boundary.
|
|
*/
|
|
*dmasize = sc->sc_dmasize =
|
|
uimin(*dmasize, DMAMAX((size_t) *sc->sc_dmaaddr));
|
|
|
|
DPRINTF(LDB_PP, ("%s: dmasize = %ld\n",
|
|
__func__, (long)sc->sc_dmasize));
|
|
|
|
/* Program the DMA address */
|
|
if (sc->sc_dmasize) {
|
|
sc->sc_dvmaaddr = *sc->sc_dmaaddr;
|
|
if (bus_dmamap_load(sc->sc_dmatag, sc->sc_dmamap,
|
|
*sc->sc_dmaaddr, sc->sc_dmasize,
|
|
NULL /* kernel address */,
|
|
BUS_DMA_NOWAIT/*|BUS_DMA_COHERENT*/))
|
|
panic("%s: pp cannot allocate DVMA address",
|
|
device_xname(sc->sc_dev));
|
|
bus_dmamap_sync(sc->sc_dmatag, sc->sc_dmamap, 0, sc->sc_dmasize,
|
|
datain ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
|
|
bus_space_write_4(sc->sc_bustag, sc->sc_regs, L64854_REG_ADDR,
|
|
sc->sc_dmamap->dm_segs[0].ds_addr);
|
|
|
|
bus_space_write_4(sc->sc_bustag, sc->sc_regs, L64854_REG_CNT,
|
|
sc->sc_dmasize);
|
|
}
|
|
|
|
/* Setup DMA control register */
|
|
csr = L64854_GCSR(sc);
|
|
csr &= ~L64854_BURST_SIZE;
|
|
if (sc->sc_burst == 32) {
|
|
csr |= L64854_BURST_32;
|
|
} else if (sc->sc_burst == 16) {
|
|
csr |= L64854_BURST_16;
|
|
} else {
|
|
csr |= L64854_BURST_0;
|
|
}
|
|
csr |= P_EN_DMA|P_INT_EN|P_EN_CNT;
|
|
#if 0
|
|
/* This bit is read-only in PP csr register */
|
|
if (datain)
|
|
csr |= P_WRITE;
|
|
else
|
|
csr &= ~P_WRITE;
|
|
#endif
|
|
L64854_SCSR(sc, csr);
|
|
|
|
return 0;
|
|
}
|
|
/*
|
|
* Parallel port DMA interrupt.
|
|
*/
|
|
int
|
|
lsi64854_pp_intr(void *arg)
|
|
{
|
|
struct lsi64854_softc *sc = arg;
|
|
char bits[64];
|
|
int ret, trans, resid = 0;
|
|
uint32_t csr;
|
|
|
|
csr = L64854_GCSR(sc);
|
|
|
|
#ifdef DEBUG
|
|
snprintb(bits, sizeof(bits), PDMACSR_BITS, csr);
|
|
#endif
|
|
DPRINTF(LDB_PP, ("%s: pp intr: addr 0x%x, csr %s\n",
|
|
device_xname(sc->sc_dev),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_regs, L64854_REG_ADDR),
|
|
bits));
|
|
|
|
if (csr & (P_ERR_PEND|P_SLAVE_ERR)) {
|
|
resid = bus_space_read_4(sc->sc_bustag, sc->sc_regs,
|
|
L64854_REG_CNT);
|
|
snprintb(bits, sizeof(bits), PDMACSR_BITS, csr);
|
|
printf("%s: pp error: resid %d csr=%s\n",
|
|
device_xname(sc->sc_dev), resid, bits);
|
|
csr &= ~P_EN_DMA; /* Stop DMA */
|
|
/* Invalidate the queue; SLAVE_ERR bit is write-to-clear */
|
|
csr |= P_INVALIDATE|P_SLAVE_ERR;
|
|
L64854_SCSR(sc, csr);
|
|
return 1;
|
|
}
|
|
|
|
ret = (csr & P_INT_PEND) != 0;
|
|
|
|
if (sc->sc_active != 0) {
|
|
DMA_DRAIN(sc, 0);
|
|
resid = bus_space_read_4(sc->sc_bustag, sc->sc_regs,
|
|
L64854_REG_CNT);
|
|
}
|
|
|
|
/* DMA has stopped */
|
|
csr &= ~D_EN_DMA;
|
|
L64854_SCSR(sc, csr);
|
|
sc->sc_active = 0;
|
|
|
|
trans = sc->sc_dmasize - resid;
|
|
if (trans < 0) { /* transferred < 0 ? */
|
|
trans = sc->sc_dmasize;
|
|
}
|
|
*sc->sc_dmalen -= trans;
|
|
*sc->sc_dmaaddr += trans;
|
|
|
|
if (sc->sc_dmamap->dm_nsegs > 0) {
|
|
bus_dmamap_sync(sc->sc_dmatag, sc->sc_dmamap, 0, sc->sc_dmasize,
|
|
(csr & D_WRITE) != 0 ?
|
|
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sc_dmatag, sc->sc_dmamap);
|
|
}
|
|
|
|
return ret != 0;
|
|
}
|