NetBSD/sys/net/if_sl.c
pooka 10fe49d72c Redefine bpf linkage through an always present op vector, i.e.
#if NBPFILTER is no longer required in the client.  This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached.  However, callers of bpf can
now be modularized.

Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff.  ... and I'm not going to ponder the depths of unload
here.

Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
2010-01-19 22:06:18 +00:00

1044 lines
26 KiB
C

/* $NetBSD: if_sl.c,v 1.116 2010/01/19 22:08:01 pooka Exp $ */
/*
* Copyright (c) 1987, 1989, 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)if_sl.c 8.9 (Berkeley) 1/9/95
*/
/*
* Serial Line interface
*
* Rick Adams
* Center for Seismic Studies
* 1300 N 17th Street, Suite 1450
* Arlington, Virginia 22209
* (703)276-7900
* rick@seismo.ARPA
* seismo!rick
*
* Pounded on heavily by Chris Torek (chris@mimsy.umd.edu, umcp-cs!chris).
* N.B.: this belongs in netinet, not net, the way it stands now.
* Should have a link-layer type designation, but wouldn't be
* backwards-compatible.
*
* Converted to 4.3BSD Beta by Chris Torek.
* Other changes made at Berkeley, based in part on code by Kirk Smith.
* W. Jolitz added slip abort.
*
* Hacked almost beyond recognition by Van Jacobson (van@helios.ee.lbl.gov).
* Added priority queuing for "interactive" traffic; hooks for TCP
* header compression; ICMP filtering (at 2400 baud, some cretin
* pinging you can use up all your bandwidth). Made low clist behavior
* more robust and slightly less likely to hang serial line.
* Sped up a bunch of things.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_sl.c,v 1.116 2010/01/19 22:08:01 pooka Exp $");
#include "opt_inet.h"
#include <sys/param.h>
#include <sys/proc.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/buf.h>
#include <sys/dkstat.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/file.h>
#include <sys/conf.h>
#include <sys/tty.h>
#include <sys/kernel.h>
#include <sys/socketvar.h>
#if __NetBSD__
#include <sys/systm.h>
#include <sys/kauth.h>
#endif
#include <sys/cpu.h>
#include <sys/intr.h>
#include <net/if.h>
#include <net/if_types.h>
#include <net/netisr.h>
#include <net/route.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#endif
#include <net/slcompress.h>
#include <net/if_slvar.h>
#include <net/slip.h>
#include <net/ppp_defs.h>
#include <net/if_ppp.h>
#include <sys/time.h>
#include <net/bpf.h>
/*
* SLMAX is a hard limit on input packet size. To simplify the code
* and improve performance, we require that packets fit in an mbuf
* cluster, and if we get a compressed packet, there's enough extra
* room to expand the header into a max length tcp/ip header (128
* bytes). So, SLMAX can be at most
* MCLBYTES - 128
*
* SLMTU is a hard limit on output packet size. To insure good
* interactive response, SLMTU wants to be the smallest size that
* amortizes the header cost. (Remember that even with
* type-of-service queuing, we have to wait for any in-progress
* packet to finish. I.e., we wait, on the average, 1/2 * mtu /
* cps, where cps is the line speed in characters per second.
* E.g., 533ms wait for a 1024 byte MTU on a 9600 baud line. The
* average compressed header size is 6-8 bytes so any MTU > 90
* bytes will give us 90% of the line bandwidth. A 100ms wait is
* tolerable (500ms is not), so want an MTU around 296. (Since TCP
* will send 256 byte segments (to allow for 40 byte headers), the
* typical packet size on the wire will be around 260 bytes). In
* 4.3tahoe+ systems, we can set an MTU in a route so we do that &
* leave the interface MTU relatively high (so we don't IP fragment
* when acting as a gateway to someone using a stupid MTU).
*
* Similar considerations apply to SLIP_HIWAT: It's the amount of
* data that will be queued 'downstream' of us (i.e., in clists
* waiting to be picked up by the tty output interrupt). If we
* queue a lot of data downstream, it's immune to our t.o.s. queuing.
* E.g., if SLIP_HIWAT is 1024, the interactive traffic in mixed
* telnet/ftp will see a 1 sec wait, independent of the mtu (the
* wait is dependent on the ftp window size but that's typically
* 1k - 4k). So, we want SLIP_HIWAT just big enough to amortize
* the cost (in idle time on the wire) of the tty driver running
* off the end of its clists & having to call back slstart for a
* new packet. For a tty interface with any buffering at all, this
* cost will be zero. Even with a totally brain dead interface (like
* the one on a typical workstation), the cost will be <= 1 character
* time. So, setting SLIP_HIWAT to ~100 guarantees that we'll lose
* at most 1% while maintaining good interactive response.
*/
#define BUFOFFSET (128+sizeof(struct ifnet **)+SLIP_HDRLEN)
#define SLMAX (MCLBYTES - BUFOFFSET)
#define SLBUFSIZE (SLMAX + BUFOFFSET)
#ifndef SLMTU
#define SLMTU 296
#endif
#if (SLMTU < 3)
#error SLMTU way too small.
#endif
#define SLIP_HIWAT roundup(50,CBSIZE)
#ifndef __NetBSD__ /* XXX - cgd */
#define CLISTRESERVE 1024 /* Can't let clists get too low */
#endif /* !__NetBSD__ */
/*
* SLIP ABORT ESCAPE MECHANISM:
* (inspired by HAYES modem escape arrangement)
* 1sec escape 1sec escape 1sec escape { 1sec escape 1sec escape }
* within window time signals a "soft" exit from slip mode by remote end
* if the IFF_DEBUG flag is on.
*/
#define ABT_ESC '\033' /* can't be t_intr - distant host must know it*/
#define ABT_IDLE 1 /* in seconds - idle before an escape */
#define ABT_COUNT 3 /* count of escapes for abort */
#define ABT_WINDOW (ABT_COUNT*2+2) /* in seconds - time to count */
static int sl_clone_create(struct if_clone *, int);
static int sl_clone_destroy(struct ifnet *);
static LIST_HEAD(, sl_softc) sl_softc_list;
struct if_clone sl_cloner =
IF_CLONE_INITIALIZER("sl", sl_clone_create, sl_clone_destroy);
#define FRAME_END 0xc0 /* Frame End */
#define FRAME_ESCAPE 0xdb /* Frame Esc */
#define TRANS_FRAME_END 0xdc /* transposed frame end */
#define TRANS_FRAME_ESCAPE 0xdd /* transposed frame esc */
static void slintr(void *);
static int slinit(struct sl_softc *);
static struct mbuf *sl_btom(struct sl_softc *, int);
static int slclose(struct tty *, int);
static int slinput(int, struct tty *);
static int slioctl(struct ifnet *, u_long, void *);
static int slopen(dev_t, struct tty *);
static int sloutput(struct ifnet *, struct mbuf *, const struct sockaddr *,
struct rtentry *);
static int slstart(struct tty *);
static int sltioctl(struct tty *, u_long, void *, int, struct lwp *);
static struct linesw slip_disc = {
.l_name = "slip",
.l_open = slopen,
.l_close = slclose,
.l_read = ttyerrio,
.l_write = ttyerrio,
.l_ioctl = sltioctl,
.l_rint = slinput,
.l_start = slstart,
.l_modem = nullmodem,
.l_poll = ttyerrpoll
};
void slattach(void);
void
slattach(void)
{
if (ttyldisc_attach(&slip_disc) != 0)
panic("slattach");
LIST_INIT(&sl_softc_list);
if_clone_attach(&sl_cloner);
}
static int
sl_clone_create(struct if_clone *ifc, int unit)
{
struct sl_softc *sc;
sc = malloc(sizeof(*sc), M_DEVBUF, M_WAIT|M_ZERO);
sc->sc_unit = unit;
if_initname(&sc->sc_if, ifc->ifc_name, unit);
sc->sc_if.if_softc = sc;
sc->sc_if.if_mtu = SLMTU;
sc->sc_if.if_flags = IFF_POINTOPOINT | SC_AUTOCOMP | IFF_MULTICAST;
sc->sc_if.if_type = IFT_SLIP;
sc->sc_if.if_ioctl = slioctl;
sc->sc_if.if_output = sloutput;
sc->sc_if.if_dlt = DLT_SLIP;
sc->sc_fastq.ifq_maxlen = 32;
IFQ_SET_READY(&sc->sc_if.if_snd);
if_attach(&sc->sc_if);
if_alloc_sadl(&sc->sc_if);
bpf_ops->bpf_attach(&sc->sc_if, DLT_SLIP, SLIP_HDRLEN,
&sc->sc_if.if_bpf);
LIST_INSERT_HEAD(&sl_softc_list, sc, sc_iflist);
return 0;
}
static int
sl_clone_destroy(struct ifnet *ifp)
{
struct sl_softc *sc = (struct sl_softc *)ifp->if_softc;
if (sc->sc_ttyp != NULL)
return EBUSY; /* Not removing it */
LIST_REMOVE(sc, sc_iflist);
bpf_ops->bpf_detach(ifp);
if_detach(ifp);
free(sc, M_DEVBUF);
return 0;
}
static int
slinit(struct sl_softc *sc)
{
if (sc->sc_mbuf == NULL) {
sc->sc_mbuf = m_gethdr(M_WAIT, MT_DATA);
m_clget(sc->sc_mbuf, M_WAIT);
}
sc->sc_ep = (u_char *)sc->sc_mbuf->m_ext.ext_buf +
sc->sc_mbuf->m_ext.ext_size;
sc->sc_mp = sc->sc_pktstart = (u_char *)sc->sc_mbuf->m_ext.ext_buf +
BUFOFFSET;
#ifdef INET
sl_compress_init(&sc->sc_comp);
#endif
return 1;
}
/*
* Line specific open routine.
* Attach the given tty to the first available sl unit.
*/
/* ARGSUSED */
static int
slopen(dev_t dev, struct tty *tp)
{
struct lwp *l = curlwp; /* XXX */
struct sl_softc *sc;
int error;
error = kauth_authorize_network(l->l_cred, KAUTH_NETWORK_INTERFACE_SLIP,
KAUTH_REQ_NETWORK_INTERFACE_SLIP_ADD, NULL, NULL, NULL);
if (error)
return error;
if (tp->t_linesw == &slip_disc)
return 0;
LIST_FOREACH(sc, &sl_softc_list, sc_iflist)
if (sc->sc_ttyp == NULL) {
sc->sc_si = softint_establish(SOFTINT_NET,
slintr, sc);
if (sc->sc_si == NULL)
return ENOMEM;
if (slinit(sc) == 0) {
softint_disestablish(sc->sc_si);
return ENOBUFS;
}
tp->t_sc = (void *)sc;
sc->sc_ttyp = tp;
sc->sc_if.if_baudrate = tp->t_ospeed;
mutex_spin_enter(&tty_lock);
tp->t_state |= TS_ISOPEN | TS_XCLUDE;
ttyflush(tp, FREAD | FWRITE);
/*
* make sure tty output queue is large enough
* to hold a full-sized packet (including frame
* end, and a possible extra frame end). full-sized
* packet occupies a max of 2*SLMAX bytes (because
* of possible escapes), and add two on for frame
* ends.
*/
if (tp->t_outq.c_cn < 2 * SLMAX + 2) {
sc->sc_oldbufsize = tp->t_outq.c_cn;
sc->sc_oldbufquot = tp->t_outq.c_cq != 0;
clfree(&tp->t_outq);
mutex_spin_exit(&tty_lock);
error = clalloc(&tp->t_outq, 2 * SLMAX + 2, 0);
if (error) {
softint_disestablish(sc->sc_si);
/*
* clalloc() might return -1 which
* is no good, so we need to return
* something else.
*/
return ENOMEM; /* XXX ?! */
}
} else {
sc->sc_oldbufsize = sc->sc_oldbufquot = 0;
mutex_spin_exit(&tty_lock);
}
return 0;
}
return ENXIO;
}
/*
* Line specific close routine.
* Detach the tty from the sl unit.
*/
static int
slclose(struct tty *tp, int flag)
{
struct sl_softc *sc;
int s;
ttywflush(tp);
sc = tp->t_sc;
if (sc != NULL) {
softint_disestablish(sc->sc_si);
s = splnet();
if_down(&sc->sc_if);
IF_PURGE(&sc->sc_fastq);
splx(s);
s = spltty();
ttyldisc_release(tp->t_linesw);
tp->t_linesw = ttyldisc_default();
tp->t_state = 0;
sc->sc_ttyp = NULL;
tp->t_sc = NULL;
m_freem(sc->sc_mbuf);
sc->sc_mbuf = NULL;
sc->sc_ep = sc->sc_mp = sc->sc_pktstart = NULL;
IF_PURGE(&sc->sc_inq);
/*
* If necessary, install a new outq buffer of the
* appropriate size.
*/
if (sc->sc_oldbufsize != 0) {
clfree(&tp->t_outq);
clalloc(&tp->t_outq, sc->sc_oldbufsize,
sc->sc_oldbufquot);
}
splx(s);
}
return 0;
}
/*
* Line specific (tty) ioctl routine.
* Provide a way to get the sl unit number.
*/
/* ARGSUSED */
static int
sltioctl(struct tty *tp, u_long cmd, void *data, int flag,
struct lwp *l)
{
struct sl_softc *sc = (struct sl_softc *)tp->t_sc;
switch (cmd) {
case SLIOCGUNIT:
*(int *)data = sc->sc_unit; /* XXX */
break;
default:
return EPASSTHROUGH;
}
return 0;
}
/*
* Queue a packet. Start transmission if not active.
* Compression happens in slintr(); if we do it here, IP TOS
* will cause us to not compress "background" packets, because
* ordering gets trashed. It can be done for all packets in slintr().
*/
static int
sloutput(struct ifnet *ifp, struct mbuf *m, const struct sockaddr *dst,
struct rtentry *rtp)
{
struct sl_softc *sc = ifp->if_softc;
struct ip *ip;
struct ifqueue *ifq = NULL;
int s, error;
ALTQ_DECL(struct altq_pktattr pktattr;)
IFQ_CLASSIFY(&ifp->if_snd, m, dst->sa_family, &pktattr);
/*
* `Cannot happen' (see slioctl). Someday we will extend
* the line protocol to support other address families.
*/
if (dst->sa_family != AF_INET) {
printf("%s: af%d not supported\n", sc->sc_if.if_xname,
dst->sa_family);
m_freem(m);
sc->sc_if.if_noproto++;
return EAFNOSUPPORT;
}
if (sc->sc_ttyp == NULL) {
m_freem(m);
return ENETDOWN; /* sort of */
}
if ((sc->sc_ttyp->t_state & TS_CARR_ON) == 0 &&
(sc->sc_ttyp->t_cflag & CLOCAL) == 0) {
m_freem(m);
printf("%s: no carrier and not local\n", sc->sc_if.if_xname);
return EHOSTUNREACH;
}
ip = mtod(m, struct ip *);
#ifdef INET
if (sc->sc_if.if_flags & SC_NOICMP && ip->ip_p == IPPROTO_ICMP) {
m_freem(m);
return ENETRESET; /* XXX ? */
}
#endif
s = spltty();
if (sc->sc_oqlen && sc->sc_ttyp->t_outq.c_cc == sc->sc_oqlen) {
struct bintime bt;
/* if output's been stalled for too long, and restart */
getbinuptime(&bt);
bintime_sub(&bt, &sc->sc_lastpacket);
if (bt.sec > 0) {
sc->sc_otimeout++;
slstart(sc->sc_ttyp);
}
}
splx(s);
s = splnet();
#ifdef INET
if ((ip->ip_tos & IPTOS_LOWDELAY) != 0)
ifq = &sc->sc_fastq;
#endif
if ((error = ifq_enqueue2(ifp, ifq, m ALTQ_COMMA
ALTQ_DECL(&pktattr))) != 0) {
splx(s);
return error;
}
getbinuptime(&sc->sc_lastpacket);
splx(s);
s = spltty();
if ((sc->sc_oqlen = sc->sc_ttyp->t_outq.c_cc) == 0)
slstart(sc->sc_ttyp);
splx(s);
return 0;
}
/*
* Start output on interface. Get another datagram
* to send from the interface queue and map it to
* the interface before starting output.
*/
static int
slstart(struct tty *tp)
{
struct sl_softc *sc = tp->t_sc;
/*
* If there is more in the output queue, just send it now.
* We are being called in lieu of ttstart and must do what
* it would.
*/
if (tp->t_outq.c_cc != 0) {
(*tp->t_oproc)(tp);
if (tp->t_outq.c_cc > SLIP_HIWAT)
return 0;
}
/*
* This happens briefly when the line shuts down.
*/
if (sc == NULL)
return 0;
softint_schedule(sc->sc_si);
return 0;
}
/*
* Copy data buffer to mbuf chain; add ifnet pointer.
*/
static struct mbuf *
sl_btom(struct sl_softc *sc, int len)
{
struct mbuf *m;
/*
* Allocate a new input buffer and swap.
*/
m = sc->sc_mbuf;
MGETHDR(sc->sc_mbuf, M_DONTWAIT, MT_DATA);
if (sc->sc_mbuf == NULL) {
sc->sc_mbuf = m;
return NULL;
}
MCLGET(sc->sc_mbuf, M_DONTWAIT);
if ((sc->sc_mbuf->m_flags & M_EXT) == 0) {
m_freem(sc->sc_mbuf);
sc->sc_mbuf = m;
return NULL;
}
sc->sc_ep = (u_char *)sc->sc_mbuf->m_ext.ext_buf +
sc->sc_mbuf->m_ext.ext_size;
m->m_data = sc->sc_pktstart;
m->m_pkthdr.len = m->m_len = len;
m->m_pkthdr.rcvif = &sc->sc_if;
return m;
}
/*
* tty interface receiver interrupt.
*/
static int
slinput(int c, struct tty *tp)
{
struct sl_softc *sc;
struct mbuf *m;
int len;
tk_nin++;
sc = (struct sl_softc *)tp->t_sc;
if (sc == NULL)
return 0;
if ((c & TTY_ERRORMASK) || ((tp->t_state & TS_CARR_ON) == 0 &&
(tp->t_cflag & CLOCAL) == 0)) {
sc->sc_flags |= SC_ERROR;
return 0;
}
c &= TTY_CHARMASK;
++sc->sc_if.if_ibytes;
if (sc->sc_if.if_flags & IFF_DEBUG) {
if (c == ABT_ESC) {
/*
* If we have a previous abort, see whether
* this one is within the time limit.
*/
if (sc->sc_abortcount &&
time_second >= sc->sc_starttime + ABT_WINDOW)
sc->sc_abortcount = 0;
/*
* If we see an abort after "idle" time, count it;
* record when the first abort escape arrived.
*/
if (time_second >= sc->sc_lasttime + ABT_IDLE) {
if (++sc->sc_abortcount == 1)
sc->sc_starttime = time_second;
if (sc->sc_abortcount >= ABT_COUNT) {
slclose(tp, 0);
return 0;
}
}
} else
sc->sc_abortcount = 0;
sc->sc_lasttime = time_second;
}
switch (c) {
case TRANS_FRAME_ESCAPE:
if (sc->sc_escape)
c = FRAME_ESCAPE;
break;
case TRANS_FRAME_END:
if (sc->sc_escape)
c = FRAME_END;
break;
case FRAME_ESCAPE:
sc->sc_escape = 1;
return 0;
case FRAME_END:
if (sc->sc_flags & SC_ERROR) {
sc->sc_flags &= ~SC_ERROR;
goto newpack;
}
len = sc->sc_mp - sc->sc_pktstart;
if (len < 3)
/* less than min length packet - ignore */
goto newpack;
m = sl_btom(sc, len);
if (m == NULL)
goto error;
IF_ENQUEUE(&sc->sc_inq, m);
softint_schedule(sc->sc_si);
goto newpack;
}
if (sc->sc_mp < sc->sc_ep) {
*sc->sc_mp++ = c;
sc->sc_escape = 0;
return 0;
}
/* can't put lower; would miss an extra frame */
sc->sc_flags |= SC_ERROR;
error:
sc->sc_if.if_ierrors++;
newpack:
sc->sc_mp = sc->sc_pktstart = (u_char *)sc->sc_mbuf->m_ext.ext_buf +
BUFOFFSET;
sc->sc_escape = 0;
return 0;
}
static void
slintr(void *arg)
{
struct sl_softc *sc = arg;
struct tty *tp = sc->sc_ttyp;
struct mbuf *m;
int s, len;
u_char *pktstart;
#ifdef INET
u_char c;
#endif
u_char chdr[CHDR_LEN];
KASSERT(tp != NULL);
/*
* Output processing loop.
*/
mutex_enter(softnet_lock);
for (;;) {
#ifdef INET
struct ip *ip;
#endif
struct mbuf *m2;
struct mbuf *bpf_m;
/*
* Do not remove the packet from the queue if it
* doesn't look like it will fit into the current
* serial output queue. With a packet full of
* escapes, this could be as bad as MTU*2+2.
*/
s = spltty();
if (tp->t_outq.c_cn - tp->t_outq.c_cc <
2 * sc->sc_if.if_mtu + 2) {
splx(s);
break;
}
splx(s);
/*
* Get a packet and send it to the interface.
*/
s = splnet();
IF_DEQUEUE(&sc->sc_fastq, m);
if (m)
sc->sc_if.if_omcasts++; /* XXX */
else
IFQ_DEQUEUE(&sc->sc_if.if_snd, m);
splx(s);
if (m == NULL)
break;
/*
* We do the header compression here rather than in
* sloutput() because the packets will be out of order
* if we are using TOS queueing, and the connection
* ID compression will get munged when this happens.
*/
if (sc->sc_if.if_bpf) {
/*
* We need to save the TCP/IP header before
* it's compressed. To avoid complicated
* code, we just make a deep copy of the
* entire packet (since this is a serial
* line, packets should be short and/or the
* copy should be negligible cost compared
* to the packet transmission time).
*/
bpf_m = m_dup(m, 0, M_COPYALL, M_DONTWAIT);
} else
bpf_m = NULL;
#ifdef INET
if ((ip = mtod(m, struct ip *))->ip_p == IPPROTO_TCP) {
if (sc->sc_if.if_flags & SC_COMPRESS)
*mtod(m, u_char *) |=
sl_compress_tcp(m, ip, &sc->sc_comp, 1);
}
#endif
if (sc->sc_if.if_bpf && bpf_m != NULL)
bpf_ops->bpf_mtap_sl_out(sc->sc_if.if_bpf, mtod(m, u_char *), bpf_m);
getbinuptime(&sc->sc_lastpacket);
s = spltty();
/*
* The extra FRAME_END will start up a new packet,
* and thus will flush any accumulated garbage. We
* do this whenever the line may have been idle for
* some time.
*/
if (tp->t_outq.c_cc == 0) {
sc->sc_if.if_obytes++;
(void)putc(FRAME_END, &tp->t_outq);
}
while (m) {
u_char *bp, *cp, *ep;
bp = cp = mtod(m, u_char *);
ep = cp + m->m_len;
while (cp < ep) {
/*
* Find out how many bytes in the
* string we can handle without
* doing something special.
*/
while (cp < ep) {
switch (*cp++) {
case FRAME_ESCAPE:
case FRAME_END:
cp--;
goto out;
}
}
out:
if (cp > bp) {
/*
* Put N characters at once
* into the tty output queue.
*/
if (b_to_q(bp, cp - bp, &tp->t_outq))
break;
sc->sc_if.if_obytes += cp - bp;
}
/*
* If there are characters left in
* the mbuf, the first one must be
* special.. Put it out in a different
* form.
*/
if (cp < ep) {
if (putc(FRAME_ESCAPE, &tp->t_outq))
break;
if (putc(*cp++ == FRAME_ESCAPE ?
TRANS_FRAME_ESCAPE :
TRANS_FRAME_END,
&tp->t_outq)) {
(void)unputc(&tp->t_outq);
break;
}
sc->sc_if.if_obytes += 2;
}
bp = cp;
}
MFREE(m, m2);
m = m2;
}
if (putc(FRAME_END, &tp->t_outq)) {
/*
* Not enough room. Remove a char to make
* room and end the packet normally. If
* you get many collisions (more than one
* or two a day), you probably do not have
* enough clists and you should increase
* "nclist" in param.c
*/
(void)unputc(&tp->t_outq);
(void)putc(FRAME_END, &tp->t_outq);
sc->sc_if.if_collisions++;
} else {
sc->sc_if.if_obytes++;
sc->sc_if.if_opackets++;
}
/*
* We now have characters in the output queue,
* kick the serial port.
*/
(*tp->t_oproc)(tp);
splx(s);
}
/*
* Input processing loop.
*/
for (;;) {
s = spltty();
IF_DEQUEUE(&sc->sc_inq, m);
splx(s);
if (m == NULL)
break;
pktstart = mtod(m, u_char *);
len = m->m_pkthdr.len;
if (sc->sc_if.if_bpf) {
/*
* Save the compressed header, so we
* can tack it on later. Note that we
* will end up copying garbage in some
* cases but this is okay. We remember
* where the buffer started so we can
* compute the new header length.
*/
memcpy(chdr, pktstart, CHDR_LEN);
}
#ifdef INET
if ((c = (*pktstart & 0xf0)) != (IPVERSION << 4)) {
if (c & 0x80)
c = TYPE_COMPRESSED_TCP;
else if (c == TYPE_UNCOMPRESSED_TCP)
*pktstart &= 0x4f; /* XXX */
/*
* We've got something that's not an IP
* packet. If compression is enabled,
* try to decompress it. Otherwise, if
* `auto-enable' compression is on and
* it's a reasonable packet, decompress
* it and then enable compression.
* Otherwise, drop it.
*/
if (sc->sc_if.if_flags & SC_COMPRESS) {
len = sl_uncompress_tcp(&pktstart, len,
(u_int)c, &sc->sc_comp);
if (len <= 0) {
m_freem(m);
continue;
}
} else if ((sc->sc_if.if_flags & SC_AUTOCOMP) &&
c == TYPE_UNCOMPRESSED_TCP && len >= 40) {
len = sl_uncompress_tcp(&pktstart, len,
(u_int)c, &sc->sc_comp);
if (len <= 0) {
m_freem(m);
continue;
}
sc->sc_if.if_flags |= SC_COMPRESS;
} else {
m_freem(m);
continue;
}
}
#endif
m->m_data = (void *) pktstart;
m->m_pkthdr.len = m->m_len = len;
if (sc->sc_if.if_bpf) {
bpf_ops->bpf_mtap_sl_in(sc->sc_if.if_bpf, chdr, &m);
if (m == NULL)
continue;
}
/*
* If the packet will fit into a single
* header mbuf, copy it into one, to save
* memory.
*/
if (m->m_pkthdr.len < MHLEN) {
struct mbuf *n;
int pktlen;
MGETHDR(n, M_DONTWAIT, MT_DATA);
pktlen = m->m_pkthdr.len;
M_MOVE_PKTHDR(n, m);
memcpy(mtod(n, void *), mtod(m, void *), pktlen);
n->m_len = m->m_len;
m_freem(m);
m = n;
}
sc->sc_if.if_ipackets++;
getbinuptime(&sc->sc_lastpacket);
#ifdef INET
s = splnet();
if (IF_QFULL(&ipintrq)) {
IF_DROP(&ipintrq);
sc->sc_if.if_ierrors++;
sc->sc_if.if_iqdrops++;
m_freem(m);
} else {
IF_ENQUEUE(&ipintrq, m);
schednetisr(NETISR_IP);
}
splx(s);
#endif
}
mutex_exit(softnet_lock);
}
/*
* Process an ioctl request.
*/
static int
slioctl(struct ifnet *ifp, u_long cmd, void *data)
{
struct ifaddr *ifa = (struct ifaddr *)data;
struct ifreq *ifr = (struct ifreq *)data;
int s = splnet(), error = 0;
struct sl_softc *sc = ifp->if_softc;
struct ppp_stats *psp;
struct ppp_comp_stats *pcp;
switch (cmd) {
case SIOCINITIFADDR:
if (ifa->ifa_addr->sa_family == AF_INET)
ifp->if_flags |= IFF_UP;
else
error = EAFNOSUPPORT;
break;
case SIOCSIFDSTADDR:
if (ifa->ifa_addr->sa_family != AF_INET)
error = EAFNOSUPPORT;
break;
case SIOCSIFMTU:
if ((ifr->ifr_mtu < 3) || (ifr->ifr_mtu > SLMAX)) {
error = EINVAL;
break;
}
/*FALLTHROUGH*/
case SIOCGIFMTU:
if ((error = ifioctl_common(&sc->sc_if, cmd, data)) == ENETRESET)
error = 0;
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
if (ifr == 0) {
error = EAFNOSUPPORT; /* XXX */
break;
}
switch (ifreq_getaddr(cmd, ifr)->sa_family) {
#ifdef INET
case AF_INET:
break;
#endif
default:
error = EAFNOSUPPORT;
break;
}
break;
case SIOCGPPPSTATS:
psp = &((struct ifpppstatsreq *) data)->stats;
(void)memset(psp, 0, sizeof(*psp));
psp->p.ppp_ibytes = sc->sc_if.if_ibytes;
psp->p.ppp_ipackets = sc->sc_if.if_ipackets;
psp->p.ppp_ierrors = sc->sc_if.if_ierrors;
psp->p.ppp_obytes = sc->sc_if.if_obytes;
psp->p.ppp_opackets = sc->sc_if.if_opackets;
psp->p.ppp_oerrors = sc->sc_if.if_oerrors;
#ifdef INET
psp->vj.vjs_packets = sc->sc_comp.sls_packets;
psp->vj.vjs_compressed = sc->sc_comp.sls_compressed;
psp->vj.vjs_searches = sc->sc_comp.sls_searches;
psp->vj.vjs_misses = sc->sc_comp.sls_misses;
psp->vj.vjs_uncompressedin = sc->sc_comp.sls_uncompressedin;
psp->vj.vjs_compressedin = sc->sc_comp.sls_compressedin;
psp->vj.vjs_errorin = sc->sc_comp.sls_errorin;
psp->vj.vjs_tossed = sc->sc_comp.sls_tossed;
#endif
break;
case SIOCGPPPCSTATS:
pcp = &((struct ifpppcstatsreq *) data)->stats;
(void)memset(pcp, 0, sizeof(*pcp));
break;
default:
error = ifioctl_common(ifp, cmd, data);
break;
}
splx(s);
return error;
}