499 lines
15 KiB
C
499 lines
15 KiB
C
/**************************************************************************
|
|
|
|
Copyright (c) 2007, Chelsio Inc.
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Neither the name of the Chelsio Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
***************************************************************************/
|
|
|
|
#include <sys/cdefs.h>
|
|
#ifdef __NetBSD__
|
|
__KERNEL_RCSID(0, "$NetBSD: cxgb_mc5.c,v 1.3 2008/01/17 06:03:22 jklos Exp $");
|
|
#endif
|
|
#ifdef __FreeBSD__
|
|
__FBSDID("$FreeBSD: src/sys/dev/cxgb/common/cxgb_mc5.c,v 1.5 2007/07/17 06:50:34 kmacy Exp $");
|
|
#endif
|
|
|
|
#ifdef CONFIG_DEFINED
|
|
#include <common/cxgb_common.h>
|
|
#include <common/cxgb_regs.h>
|
|
#else
|
|
#ifdef __FreeBSD__
|
|
#include <dev/cxgb/common/cxgb_common.h>
|
|
#include <dev/cxgb/common/cxgb_regs.h>
|
|
#endif
|
|
#ifdef __NetBSD__
|
|
#include <dev/pci/cxgb_common.h>
|
|
#include <dev/pci/cxgb_regs.h>
|
|
#endif
|
|
#endif
|
|
|
|
enum {
|
|
IDT75P52100 = 4,
|
|
IDT75N43102 = 5
|
|
};
|
|
|
|
/* DBGI command mode */
|
|
enum {
|
|
DBGI_MODE_MBUS = 0,
|
|
DBGI_MODE_IDT52100 = 5
|
|
};
|
|
|
|
/* IDT 75P52100 commands */
|
|
#define IDT_CMD_READ 0
|
|
#define IDT_CMD_WRITE 1
|
|
#define IDT_CMD_SEARCH 2
|
|
#define IDT_CMD_LEARN 3
|
|
|
|
/* IDT LAR register address and value for 144-bit mode (low 32 bits) */
|
|
#define IDT_LAR_ADR0 0x180006
|
|
#define IDT_LAR_MODE144 0xffff0000
|
|
|
|
/* IDT SCR and SSR addresses (low 32 bits) */
|
|
#define IDT_SCR_ADR0 0x180000
|
|
#define IDT_SSR0_ADR0 0x180002
|
|
#define IDT_SSR1_ADR0 0x180004
|
|
|
|
/* IDT GMR base address (low 32 bits) */
|
|
#define IDT_GMR_BASE_ADR0 0x180020
|
|
|
|
/* IDT data and mask array base addresses (low 32 bits) */
|
|
#define IDT_DATARY_BASE_ADR0 0
|
|
#define IDT_MSKARY_BASE_ADR0 0x80000
|
|
|
|
/* IDT 75N43102 commands */
|
|
#define IDT4_CMD_SEARCH144 3
|
|
#define IDT4_CMD_WRITE 4
|
|
#define IDT4_CMD_READ 5
|
|
|
|
/* IDT 75N43102 SCR address (low 32 bits) */
|
|
#define IDT4_SCR_ADR0 0x3
|
|
|
|
/* IDT 75N43102 GMR base addresses (low 32 bits) */
|
|
#define IDT4_GMR_BASE0 0x10
|
|
#define IDT4_GMR_BASE1 0x20
|
|
#define IDT4_GMR_BASE2 0x30
|
|
|
|
/* IDT 75N43102 data and mask array base addresses (low 32 bits) */
|
|
#define IDT4_DATARY_BASE_ADR0 0x1000000
|
|
#define IDT4_MSKARY_BASE_ADR0 0x2000000
|
|
|
|
#define MAX_WRITE_ATTEMPTS 5
|
|
|
|
#define MAX_ROUTES 2048
|
|
|
|
/*
|
|
* Issue a command to the TCAM and wait for its completion. The address and
|
|
* any data required by the command must have been setup by the caller.
|
|
*/
|
|
static int mc5_cmd_write(adapter_t *adapter, u32 cmd)
|
|
{
|
|
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_CMD, cmd);
|
|
return t3_wait_op_done(adapter, A_MC5_DB_DBGI_RSP_STATUS,
|
|
F_DBGIRSPVALID, 1, MAX_WRITE_ATTEMPTS, 1);
|
|
}
|
|
|
|
static inline void dbgi_wr_addr3(adapter_t *adapter, u32 v1, u32 v2, u32 v3)
|
|
{
|
|
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, v1);
|
|
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR1, v2);
|
|
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR2, v3);
|
|
}
|
|
|
|
static inline void dbgi_wr_data3(adapter_t *adapter, u32 v1, u32 v2, u32 v3)
|
|
{
|
|
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA0, v1);
|
|
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA1, v2);
|
|
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA2, v3);
|
|
}
|
|
|
|
static inline void dbgi_rd_rsp3(adapter_t *adapter, u32 *v1, u32 *v2, u32 *v3)
|
|
{
|
|
*v1 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA0);
|
|
*v2 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA1);
|
|
*v3 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA2);
|
|
}
|
|
|
|
/*
|
|
* Write data to the TCAM register at address (0, 0, addr_lo) using the TCAM
|
|
* command cmd. The data to be written must have been set up by the caller.
|
|
* Returns -1 on failure, 0 on success.
|
|
*/
|
|
static int mc5_write(adapter_t *adapter, u32 addr_lo, u32 cmd)
|
|
{
|
|
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, addr_lo);
|
|
if (mc5_cmd_write(adapter, cmd) == 0)
|
|
return 0;
|
|
CH_ERR(adapter, "MC5 timeout writing to TCAM address 0x%x\n", addr_lo);
|
|
return -1;
|
|
}
|
|
|
|
static int init_mask_data_array(struct mc5 *mc5, u32 mask_array_base,
|
|
u32 data_array_base, u32 write_cmd,
|
|
int addr_shift)
|
|
{
|
|
unsigned int i;
|
|
adapter_t *adap = mc5->adapter;
|
|
|
|
/*
|
|
* We need the size of the TCAM data and mask arrays in terms of
|
|
* 72-bit entries.
|
|
*/
|
|
unsigned int size72 = mc5->tcam_size;
|
|
unsigned int server_base = t3_read_reg(adap, A_MC5_DB_SERVER_INDEX);
|
|
|
|
if (mc5->mode == MC5_MODE_144_BIT) {
|
|
size72 *= 2; /* 1 144-bit entry is 2 72-bit entries */
|
|
server_base *= 2;
|
|
}
|
|
|
|
/* Clear the data array */
|
|
dbgi_wr_data3(adap, 0, 0, 0);
|
|
for (i = 0; i < size72; i++)
|
|
if (mc5_write(adap, data_array_base + (i << addr_shift),
|
|
write_cmd))
|
|
return -1;
|
|
|
|
/* Initialize the mask array. */
|
|
for (i = 0; i < server_base; i++) {
|
|
dbgi_wr_data3(adap, 0x3fffffff, 0xfff80000, 0xff);
|
|
if (mc5_write(adap, mask_array_base + (i << addr_shift),
|
|
write_cmd))
|
|
return -1;
|
|
i++;
|
|
dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
|
|
if (mc5_write(adap, mask_array_base + (i << addr_shift),
|
|
write_cmd))
|
|
return -1;
|
|
}
|
|
|
|
dbgi_wr_data3(adap,
|
|
mc5->mode == MC5_MODE_144_BIT ? 0xfffffff9 : 0xfffffffd,
|
|
0xffffffff, 0xff);
|
|
for (; i < size72; i++)
|
|
if (mc5_write(adap, mask_array_base + (i << addr_shift),
|
|
write_cmd))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int init_idt52100(struct mc5 *mc5)
|
|
{
|
|
int i;
|
|
adapter_t *adap = mc5->adapter;
|
|
|
|
t3_write_reg(adap, A_MC5_DB_RSP_LATENCY,
|
|
V_RDLAT(0x15) | V_LRNLAT(0x15) | V_SRCHLAT(0x15));
|
|
t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 2);
|
|
|
|
/*
|
|
* Use GMRs 14-15 for ELOOKUP, GMRs 12-13 for SYN lookups, and
|
|
* GMRs 8-9 for ACK- and AOPEN searches.
|
|
*/
|
|
t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT_CMD_WRITE);
|
|
t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT_CMD_WRITE);
|
|
t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, IDT_CMD_SEARCH);
|
|
t3_write_reg(adap, A_MC5_DB_AOPEN_LRN_CMD, IDT_CMD_LEARN);
|
|
t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT_CMD_SEARCH | 0x6000);
|
|
t3_write_reg(adap, A_MC5_DB_SYN_LRN_CMD, IDT_CMD_LEARN);
|
|
t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT_CMD_SEARCH);
|
|
t3_write_reg(adap, A_MC5_DB_ACK_LRN_CMD, IDT_CMD_LEARN);
|
|
t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT_CMD_SEARCH);
|
|
t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT_CMD_SEARCH | 0x7000);
|
|
t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT_CMD_WRITE);
|
|
t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT_CMD_READ);
|
|
|
|
/* Set DBGI command mode for IDT TCAM. */
|
|
t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100);
|
|
|
|
/* Set up LAR */
|
|
dbgi_wr_data3(adap, IDT_LAR_MODE144, 0, 0);
|
|
if (mc5_write(adap, IDT_LAR_ADR0, IDT_CMD_WRITE))
|
|
goto err;
|
|
|
|
/* Set up SSRs */
|
|
dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0);
|
|
if (mc5_write(adap, IDT_SSR0_ADR0, IDT_CMD_WRITE) ||
|
|
mc5_write(adap, IDT_SSR1_ADR0, IDT_CMD_WRITE))
|
|
goto err;
|
|
|
|
/* Set up GMRs */
|
|
for (i = 0; i < 32; ++i) {
|
|
if (i >= 12 && i < 15)
|
|
dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff);
|
|
else if (i == 15)
|
|
dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff);
|
|
else
|
|
dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
|
|
|
|
if (mc5_write(adap, IDT_GMR_BASE_ADR0 + i, IDT_CMD_WRITE))
|
|
goto err;
|
|
}
|
|
|
|
/* Set up SCR */
|
|
dbgi_wr_data3(adap, 1, 0, 0);
|
|
if (mc5_write(adap, IDT_SCR_ADR0, IDT_CMD_WRITE))
|
|
goto err;
|
|
|
|
return init_mask_data_array(mc5, IDT_MSKARY_BASE_ADR0,
|
|
IDT_DATARY_BASE_ADR0, IDT_CMD_WRITE, 0);
|
|
err:
|
|
return -EIO;
|
|
}
|
|
|
|
static int init_idt43102(struct mc5 *mc5)
|
|
{
|
|
int i;
|
|
adapter_t *adap = mc5->adapter;
|
|
|
|
t3_write_reg(adap, A_MC5_DB_RSP_LATENCY,
|
|
adap->params.rev == 0 ? V_RDLAT(0xd) | V_SRCHLAT(0x11) :
|
|
V_RDLAT(0xd) | V_SRCHLAT(0x12));
|
|
|
|
/*
|
|
* Use GMRs 24-25 for ELOOKUP, GMRs 20-21 for SYN lookups, and no mask
|
|
* for ACK- and AOPEN searches.
|
|
*/
|
|
t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT4_CMD_WRITE);
|
|
t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT4_CMD_WRITE);
|
|
t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD,
|
|
IDT4_CMD_SEARCH144 | 0x3800);
|
|
t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT4_CMD_SEARCH144);
|
|
t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT4_CMD_SEARCH144 | 0x3800);
|
|
t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x3800);
|
|
t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x800);
|
|
t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT4_CMD_WRITE);
|
|
t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT4_CMD_READ);
|
|
|
|
t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 3);
|
|
|
|
/* Set DBGI command mode for IDT TCAM. */
|
|
t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100);
|
|
|
|
/* Set up GMRs */
|
|
dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
|
|
for (i = 0; i < 7; ++i)
|
|
if (mc5_write(adap, IDT4_GMR_BASE0 + i, IDT4_CMD_WRITE))
|
|
goto err;
|
|
|
|
for (i = 0; i < 4; ++i)
|
|
if (mc5_write(adap, IDT4_GMR_BASE2 + i, IDT4_CMD_WRITE))
|
|
goto err;
|
|
|
|
dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff);
|
|
if (mc5_write(adap, IDT4_GMR_BASE1, IDT4_CMD_WRITE) ||
|
|
mc5_write(adap, IDT4_GMR_BASE1 + 1, IDT4_CMD_WRITE) ||
|
|
mc5_write(adap, IDT4_GMR_BASE1 + 4, IDT4_CMD_WRITE))
|
|
goto err;
|
|
|
|
dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff);
|
|
if (mc5_write(adap, IDT4_GMR_BASE1 + 5, IDT4_CMD_WRITE))
|
|
goto err;
|
|
|
|
/* Set up SCR */
|
|
dbgi_wr_data3(adap, 0xf0000000, 0, 0);
|
|
if (mc5_write(adap, IDT4_SCR_ADR0, IDT4_CMD_WRITE))
|
|
goto err;
|
|
|
|
return init_mask_data_array(mc5, IDT4_MSKARY_BASE_ADR0,
|
|
IDT4_DATARY_BASE_ADR0, IDT4_CMD_WRITE, 1);
|
|
err:
|
|
return -EIO;
|
|
}
|
|
|
|
/* Put MC5 in DBGI mode. */
|
|
static inline void mc5_dbgi_mode_enable(const struct mc5 *mc5)
|
|
{
|
|
t3_set_reg_field(mc5->adapter, A_MC5_DB_CONFIG, F_PRTYEN | F_MBUSEN,
|
|
F_DBGIEN);
|
|
}
|
|
|
|
/* Put MC5 in M-Bus mode. */
|
|
static void mc5_dbgi_mode_disable(const struct mc5 *mc5)
|
|
{
|
|
t3_set_reg_field(mc5->adapter, A_MC5_DB_CONFIG, F_DBGIEN,
|
|
V_PRTYEN(mc5->parity_enabled) | F_MBUSEN);
|
|
}
|
|
|
|
/*
|
|
* Initialization that requires the OS and protocol layers to already
|
|
* be intialized goes here.
|
|
*/
|
|
int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
|
|
unsigned int nroutes)
|
|
{
|
|
int err;
|
|
unsigned int tcam_size = mc5->tcam_size;
|
|
unsigned int mode72 = mc5->mode == MC5_MODE_72_BIT;
|
|
adapter_t *adap = mc5->adapter;
|
|
|
|
if (!tcam_size)
|
|
return 0;
|
|
|
|
if (nroutes > MAX_ROUTES || nroutes + nservers + nfilters > tcam_size)
|
|
return -EINVAL;
|
|
|
|
if (nfilters && adap->params.rev < T3_REV_C)
|
|
mc5->parity_enabled = 0;
|
|
|
|
/* Reset the TCAM */
|
|
t3_set_reg_field(adap, A_MC5_DB_CONFIG, F_TMMODE | F_COMPEN,
|
|
V_COMPEN(mode72) | V_TMMODE(mode72) | F_TMRST);
|
|
if (t3_wait_op_done(adap, A_MC5_DB_CONFIG, F_TMRDY, 1, 500, 0)) {
|
|
CH_ERR(adap, "TCAM reset timed out\n");
|
|
return -1;
|
|
}
|
|
|
|
t3_write_reg(adap, A_MC5_DB_ROUTING_TABLE_INDEX, tcam_size - nroutes);
|
|
t3_write_reg(adap, A_MC5_DB_FILTER_TABLE,
|
|
tcam_size - nroutes - nfilters);
|
|
t3_write_reg(adap, A_MC5_DB_SERVER_INDEX,
|
|
tcam_size - nroutes - nfilters - nservers);
|
|
|
|
/* All the TCAM addresses we access have only the low 32 bits non 0 */
|
|
t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR1, 0);
|
|
t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR2, 0);
|
|
|
|
mc5_dbgi_mode_enable(mc5);
|
|
|
|
switch (mc5->part_type) {
|
|
case IDT75P52100:
|
|
err = init_idt52100(mc5);
|
|
break;
|
|
case IDT75N43102:
|
|
err = init_idt43102(mc5);
|
|
break;
|
|
default:
|
|
CH_ERR(adap, "Unsupported TCAM type %d\n", mc5->part_type);
|
|
err = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
mc5_dbgi_mode_disable(mc5);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* read_mc5_range - dump a part of the memory managed by MC5
|
|
* @mc5: the MC5 handle
|
|
* @start: the start address for the dump
|
|
* @n: number of 72-bit words to read
|
|
* @buf: result buffer
|
|
*
|
|
* Read n 72-bit words from MC5 memory from the given start location.
|
|
*/
|
|
int t3_read_mc5_range(const struct mc5 *mc5, unsigned int start,
|
|
unsigned int n, u32 *buf)
|
|
{
|
|
u32 read_cmd;
|
|
int err = 0;
|
|
adapter_t *adap = mc5->adapter;
|
|
|
|
if (mc5->part_type == IDT75P52100)
|
|
read_cmd = IDT_CMD_READ;
|
|
else if (mc5->part_type == IDT75N43102)
|
|
read_cmd = IDT4_CMD_READ;
|
|
else
|
|
return -EINVAL;
|
|
|
|
mc5_dbgi_mode_enable(mc5);
|
|
|
|
while (n--) {
|
|
t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR0, start++);
|
|
if (mc5_cmd_write(adap, read_cmd)) {
|
|
err = -EIO;
|
|
break;
|
|
}
|
|
dbgi_rd_rsp3(adap, buf + 2, buf + 1, buf);
|
|
buf += 3;
|
|
}
|
|
|
|
mc5_dbgi_mode_disable(mc5);
|
|
return 0;
|
|
}
|
|
|
|
#define MC5_INT_FATAL (F_PARITYERR | F_REQQPARERR | F_DISPQPARERR)
|
|
|
|
/*
|
|
* MC5 interrupt handler
|
|
*/
|
|
void t3_mc5_intr_handler(struct mc5 *mc5)
|
|
{
|
|
adapter_t *adap = mc5->adapter;
|
|
u32 cause = t3_read_reg(adap, A_MC5_DB_INT_CAUSE);
|
|
|
|
if ((cause & F_PARITYERR) && mc5->parity_enabled) {
|
|
CH_ALERT(adap, "MC5 parity error\n");
|
|
mc5->stats.parity_err++;
|
|
}
|
|
|
|
if (cause & F_REQQPARERR) {
|
|
CH_ALERT(adap, "MC5 request queue parity error\n");
|
|
mc5->stats.reqq_parity_err++;
|
|
}
|
|
|
|
if (cause & F_DISPQPARERR) {
|
|
CH_ALERT(adap, "MC5 dispatch queue parity error\n");
|
|
mc5->stats.dispq_parity_err++;
|
|
}
|
|
|
|
if (cause & F_ACTRGNFULL)
|
|
mc5->stats.active_rgn_full++;
|
|
if (cause & F_NFASRCHFAIL)
|
|
mc5->stats.nfa_srch_err++;
|
|
if (cause & F_UNKNOWNCMD)
|
|
mc5->stats.unknown_cmd++;
|
|
if (cause & F_DELACTEMPTY)
|
|
mc5->stats.del_act_empty++;
|
|
if (cause & MC5_INT_FATAL)
|
|
t3_fatal_err(adap);
|
|
|
|
t3_write_reg(adap, A_MC5_DB_INT_CAUSE, cause);
|
|
}
|
|
|
|
void __devinit t3_mc5_prep(adapter_t *adapter, struct mc5 *mc5, int mode)
|
|
{
|
|
#define K * 1024
|
|
|
|
static unsigned int tcam_part_size[] = { /* in K 72-bit entries */
|
|
64 K, 128 K, 256 K, 32 K
|
|
};
|
|
|
|
#undef K
|
|
|
|
u32 cfg = t3_read_reg(adapter, A_MC5_DB_CONFIG);
|
|
|
|
mc5->adapter = adapter;
|
|
mc5->parity_enabled = 1;
|
|
mc5->mode = (unsigned char) mode;
|
|
mc5->part_type = (unsigned char) G_TMTYPE(cfg);
|
|
if (cfg & F_TMTYPEHI)
|
|
mc5->part_type |= 4;
|
|
|
|
mc5->tcam_size = tcam_part_size[G_TMPARTSIZE(cfg)];
|
|
if (mode == MC5_MODE_144_BIT)
|
|
mc5->tcam_size /= 2;
|
|
}
|