NetBSD/gnu/dist/toolchain/gcc/reorg.c

3674 lines
116 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Perform instruction reorganizations for delay slot filling.
Copyright (C) 1992, 93-98, 1999 Free Software Foundation, Inc.
Contributed by Richard Kenner (kenner@vlsi1.ultra.nyu.edu).
Hacked by Michael Tiemann (tiemann@cygnus.com).
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* Instruction reorganization pass.
This pass runs after register allocation and final jump
optimization. It should be the last pass to run before peephole.
It serves primarily to fill delay slots of insns, typically branch
and call insns. Other insns typically involve more complicated
interactions of data dependencies and resource constraints, and
are better handled by scheduling before register allocation (by the
function `schedule_insns').
The Branch Penalty is the number of extra cycles that are needed to
execute a branch insn. On an ideal machine, branches take a single
cycle, and the Branch Penalty is 0. Several RISC machines approach
branch delays differently:
The MIPS and AMD 29000 have a single branch delay slot. Most insns
(except other branches) can be used to fill this slot. When the
slot is filled, two insns execute in two cycles, reducing the
branch penalty to zero.
The Motorola 88000 conditionally exposes its branch delay slot,
so code is shorter when it is turned off, but will run faster
when useful insns are scheduled there.
The IBM ROMP has two forms of branch and call insns, both with and
without a delay slot. Much like the 88k, insns not using the delay
slot can be shorted (2 bytes vs. 4 bytes), but will run slowed.
The SPARC always has a branch delay slot, but its effects can be
annulled when the branch is not taken. This means that failing to
find other sources of insns, we can hoist an insn from the branch
target that would only be safe to execute knowing that the branch
is taken.
The HP-PA always has a branch delay slot. For unconditional branches
its effects can be annulled when the branch is taken. The effects
of the delay slot in a conditional branch can be nullified for forward
taken branches, or for untaken backward branches. This means
we can hoist insns from the fall-through path for forward branches or
steal insns from the target of backward branches.
The TMS320C3x and C4x have three branch delay slots. When the three
slots are filled, the branch penalty is zero. Most insns can fill the
delay slots except jump insns.
Three techniques for filling delay slots have been implemented so far:
(1) `fill_simple_delay_slots' is the simplest, most efficient way
to fill delay slots. This pass first looks for insns which come
from before the branch and which are safe to execute after the
branch. Then it searches after the insn requiring delay slots or,
in the case of a branch, for insns that are after the point at
which the branch merges into the fallthrough code, if such a point
exists. When such insns are found, the branch penalty decreases
and no code expansion takes place.
(2) `fill_eager_delay_slots' is more complicated: it is used for
scheduling conditional jumps, or for scheduling jumps which cannot
be filled using (1). A machine need not have annulled jumps to use
this strategy, but it helps (by keeping more options open).
`fill_eager_delay_slots' tries to guess the direction the branch
will go; if it guesses right 100% of the time, it can reduce the
branch penalty as much as `fill_simple_delay_slots' does. If it
guesses wrong 100% of the time, it might as well schedule nops (or
on the m88k, unexpose the branch slot). When
`fill_eager_delay_slots' takes insns from the fall-through path of
the jump, usually there is no code expansion; when it takes insns
from the branch target, there is code expansion if it is not the
only way to reach that target.
(3) `relax_delay_slots' uses a set of rules to simplify code that
has been reorganized by (1) and (2). It finds cases where
conditional test can be eliminated, jumps can be threaded, extra
insns can be eliminated, etc. It is the job of (1) and (2) to do a
good job of scheduling locally; `relax_delay_slots' takes care of
making the various individual schedules work well together. It is
especially tuned to handle the control flow interactions of branch
insns. It does nothing for insns with delay slots that do not
branch.
On machines that use CC0, we are very conservative. We will not make
a copy of an insn involving CC0 since we want to maintain a 1-1
correspondence between the insn that sets and uses CC0. The insns are
allowed to be separated by placing an insn that sets CC0 (but not an insn
that uses CC0; we could do this, but it doesn't seem worthwhile) in a
delay slot. In that case, we point each insn at the other with REG_CC_USER
and REG_CC_SETTER notes. Note that these restrictions affect very few
machines because most RISC machines with delay slots will not use CC0
(the RT is the only known exception at this point).
Not yet implemented:
The Acorn Risc Machine can conditionally execute most insns, so
it is profitable to move single insns into a position to execute
based on the condition code of the previous insn.
The HP-PA can conditionally nullify insns, providing a similar
effect to the ARM, differing mostly in which insn is "in charge". */
#include "config.h"
#include "system.h"
#include "toplev.h"
#include "rtl.h"
#include "expr.h"
#include "insn-config.h"
#include "conditions.h"
#include "hard-reg-set.h"
#include "basic-block.h"
#include "regs.h"
#include "insn-flags.h"
#include "recog.h"
#include "flags.h"
#include "output.h"
#include "obstack.h"
#include "insn-attr.h"
#include "resource.h"
#ifdef DELAY_SLOTS
#define obstack_chunk_alloc xmalloc
#define obstack_chunk_free free
#ifndef ANNUL_IFTRUE_SLOTS
#define eligible_for_annul_true(INSN, SLOTS, TRIAL, FLAGS) 0
#endif
#ifndef ANNUL_IFFALSE_SLOTS
#define eligible_for_annul_false(INSN, SLOTS, TRIAL, FLAGS) 0
#endif
/* Insns which have delay slots that have not yet been filled. */
static struct obstack unfilled_slots_obstack;
static rtx *unfilled_firstobj;
/* Define macros to refer to the first and last slot containing unfilled
insns. These are used because the list may move and its address
should be recomputed at each use. */
#define unfilled_slots_base \
((rtx *) obstack_base (&unfilled_slots_obstack))
#define unfilled_slots_next \
((rtx *) obstack_next_free (&unfilled_slots_obstack))
/* Points to the label before the end of the function. */
static rtx end_of_function_label;
/* Mapping between INSN_UID's and position in the code since INSN_UID's do
not always monotonically increase. */
static int *uid_to_ruid;
/* Highest valid index in `uid_to_ruid'. */
static int max_uid;
static int stop_search_p PROTO((rtx, int));
static int resource_conflicts_p PROTO((struct resources *,
struct resources *));
static int insn_references_resource_p PROTO((rtx, struct resources *, int));
static int insn_sets_resource_p PROTO((rtx, struct resources *, int));
static rtx find_end_label PROTO((void));
static rtx emit_delay_sequence PROTO((rtx, rtx, int));
static rtx add_to_delay_list PROTO((rtx, rtx));
static rtx delete_from_delay_slot PROTO((rtx));
static void delete_scheduled_jump PROTO((rtx));
static void note_delay_statistics PROTO((int, int));
static rtx optimize_skip PROTO((rtx));
static int get_jump_flags PROTO((rtx, rtx));
static int rare_destination PROTO((rtx));
static int mostly_true_jump PROTO((rtx, rtx));
static rtx get_branch_condition PROTO((rtx, rtx));
static int condition_dominates_p PROTO((rtx, rtx));
static int redirect_with_delay_slots_safe_p PROTO ((rtx, rtx, rtx));
static int redirect_with_delay_list_safe_p PROTO ((rtx, rtx, rtx));
static int check_annul_list_true_false PROTO ((int, rtx));
static rtx steal_delay_list_from_target PROTO((rtx, rtx, rtx, rtx,
struct resources *,
struct resources *,
struct resources *,
int, int *, int *, rtx *));
static rtx steal_delay_list_from_fallthrough PROTO((rtx, rtx, rtx, rtx,
struct resources *,
struct resources *,
struct resources *,
int, int *, int *));
static void try_merge_delay_insns PROTO((rtx, rtx));
static rtx redundant_insn PROTO((rtx, rtx, rtx));
static int own_thread_p PROTO((rtx, rtx, int));
static void update_block PROTO((rtx, rtx));
static int reorg_redirect_jump PROTO((rtx, rtx));
static void update_reg_dead_notes PROTO((rtx, rtx));
static void fix_reg_dead_note PROTO((rtx, rtx));
static void update_reg_unused_notes PROTO((rtx, rtx));
static void fill_simple_delay_slots PROTO((int));
static rtx fill_slots_from_thread PROTO((rtx, rtx, rtx, rtx, int, int,
int, int, int *, rtx));
static void fill_eager_delay_slots PROTO((void));
static void relax_delay_slots PROTO((rtx));
static void make_return_insns PROTO((rtx));
/* Return TRUE if this insn should stop the search for insn to fill delay
slots. LABELS_P indicates that labels should terminate the search.
In all cases, jumps terminate the search. */
static int
stop_search_p (insn, labels_p)
rtx insn;
int labels_p;
{
if (insn == 0)
return 1;
switch (GET_CODE (insn))
{
case NOTE:
case CALL_INSN:
return 0;
case CODE_LABEL:
return labels_p;
case JUMP_INSN:
case BARRIER:
return 1;
case INSN:
/* OK unless it contains a delay slot or is an `asm' insn of some type.
We don't know anything about these. */
return (GET_CODE (PATTERN (insn)) == SEQUENCE
|| GET_CODE (PATTERN (insn)) == ASM_INPUT
|| asm_noperands (PATTERN (insn)) >= 0);
default:
abort ();
}
}
/* Return TRUE if any resources are marked in both RES1 and RES2 or if either
resource set contains a volatile memory reference. Otherwise, return FALSE. */
static int
resource_conflicts_p (res1, res2)
struct resources *res1, *res2;
{
if ((res1->cc && res2->cc) || (res1->memory && res2->memory)
|| (res1->unch_memory && res2->unch_memory)
|| res1->volatil || res2->volatil)
return 1;
#ifdef HARD_REG_SET
return (res1->regs & res2->regs) != HARD_CONST (0);
#else
{
int i;
for (i = 0; i < HARD_REG_SET_LONGS; i++)
if ((res1->regs[i] & res2->regs[i]) != 0)
return 1;
return 0;
}
#endif
}
/* Return TRUE if any resource marked in RES, a `struct resources', is
referenced by INSN. If INCLUDE_DELAYED_EFFECTS is set, return if the called
routine is using those resources.
We compute this by computing all the resources referenced by INSN and
seeing if this conflicts with RES. It might be faster to directly check
ourselves, and this is the way it used to work, but it means duplicating
a large block of complex code. */
static int
insn_references_resource_p (insn, res, include_delayed_effects)
register rtx insn;
register struct resources *res;
int include_delayed_effects;
{
struct resources insn_res;
CLEAR_RESOURCE (&insn_res);
mark_referenced_resources (insn, &insn_res, include_delayed_effects);
return resource_conflicts_p (&insn_res, res);
}
/* Return TRUE if INSN modifies resources that are marked in RES.
INCLUDE_DELAYED_EFFECTS is set if the actions of that routine should be
included. CC0 is only modified if it is explicitly set; see comments
in front of mark_set_resources for details. */
static int
insn_sets_resource_p (insn, res, include_delayed_effects)
register rtx insn;
register struct resources *res;
int include_delayed_effects;
{
struct resources insn_sets;
CLEAR_RESOURCE (&insn_sets);
mark_set_resources (insn, &insn_sets, 0, include_delayed_effects);
return resource_conflicts_p (&insn_sets, res);
}
/* Find a label at the end of the function or before a RETURN. If there is
none, make one. */
static rtx
find_end_label ()
{
rtx insn;
/* If we found one previously, return it. */
if (end_of_function_label)
return end_of_function_label;
/* Otherwise, see if there is a label at the end of the function. If there
is, it must be that RETURN insns aren't needed, so that is our return
label and we don't have to do anything else. */
insn = get_last_insn ();
while (GET_CODE (insn) == NOTE
|| (GET_CODE (insn) == INSN
&& (GET_CODE (PATTERN (insn)) == USE
|| GET_CODE (PATTERN (insn)) == CLOBBER)))
insn = PREV_INSN (insn);
/* When a target threads its epilogue we might already have a
suitable return insn. If so put a label before it for the
end_of_function_label. */
if (GET_CODE (insn) == BARRIER
&& GET_CODE (PREV_INSN (insn)) == JUMP_INSN
&& GET_CODE (PATTERN (PREV_INSN (insn))) == RETURN)
{
rtx temp = PREV_INSN (PREV_INSN (insn));
end_of_function_label = gen_label_rtx ();
LABEL_NUSES (end_of_function_label) = 0;
/* Put the label before an USE insns that may proceed the RETURN insn. */
while (GET_CODE (temp) == USE)
temp = PREV_INSN (temp);
emit_label_after (end_of_function_label, temp);
}
else if (GET_CODE (insn) == CODE_LABEL)
end_of_function_label = insn;
else
{
/* Otherwise, make a new label and emit a RETURN and BARRIER,
if needed. */
end_of_function_label = gen_label_rtx ();
LABEL_NUSES (end_of_function_label) = 0;
emit_label (end_of_function_label);
#ifdef HAVE_return
if (HAVE_return)
{
/* The return we make may have delay slots too. */
rtx insn = gen_return ();
insn = emit_jump_insn (insn);
emit_barrier ();
if (num_delay_slots (insn) > 0)
obstack_ptr_grow (&unfilled_slots_obstack, insn);
}
#endif
}
/* Show one additional use for this label so it won't go away until
we are done. */
++LABEL_NUSES (end_of_function_label);
return end_of_function_label;
}
/* Put INSN and LIST together in a SEQUENCE rtx of LENGTH, and replace
the pattern of INSN with the SEQUENCE.
Chain the insns so that NEXT_INSN of each insn in the sequence points to
the next and NEXT_INSN of the last insn in the sequence points to
the first insn after the sequence. Similarly for PREV_INSN. This makes
it easier to scan all insns.
Returns the SEQUENCE that replaces INSN. */
static rtx
emit_delay_sequence (insn, list, length)
rtx insn;
rtx list;
int length;
{
register int i = 1;
register rtx li;
int had_barrier = 0;
/* Allocate the rtvec to hold the insns and the SEQUENCE. */
rtvec seqv = rtvec_alloc (length + 1);
rtx seq = gen_rtx_SEQUENCE (VOIDmode, seqv);
rtx seq_insn = make_insn_raw (seq);
rtx first = get_insns ();
rtx last = get_last_insn ();
/* Make a copy of the insn having delay slots. */
rtx delay_insn = copy_rtx (insn);
/* If INSN is followed by a BARRIER, delete the BARRIER since it will only
confuse further processing. Update LAST in case it was the last insn.
We will put the BARRIER back in later. */
if (NEXT_INSN (insn) && GET_CODE (NEXT_INSN (insn)) == BARRIER)
{
delete_insn (NEXT_INSN (insn));
last = get_last_insn ();
had_barrier = 1;
}
/* Splice our SEQUENCE into the insn stream where INSN used to be. */
NEXT_INSN (seq_insn) = NEXT_INSN (insn);
PREV_INSN (seq_insn) = PREV_INSN (insn);
if (insn != last)
PREV_INSN (NEXT_INSN (seq_insn)) = seq_insn;
if (insn != first)
NEXT_INSN (PREV_INSN (seq_insn)) = seq_insn;
/* Note the calls to set_new_first_and_last_insn must occur after
SEQ_INSN has been completely spliced into the insn stream.
Otherwise CUR_INSN_UID will get set to an incorrect value because
set_new_first_and_last_insn will not find SEQ_INSN in the chain. */
if (insn == last)
set_new_first_and_last_insn (first, seq_insn);
if (insn == first)
set_new_first_and_last_insn (seq_insn, last);
/* Build our SEQUENCE and rebuild the insn chain. */
XVECEXP (seq, 0, 0) = delay_insn;
INSN_DELETED_P (delay_insn) = 0;
PREV_INSN (delay_insn) = PREV_INSN (seq_insn);
for (li = list; li; li = XEXP (li, 1), i++)
{
rtx tem = XEXP (li, 0);
rtx note;
/* Show that this copy of the insn isn't deleted. */
INSN_DELETED_P (tem) = 0;
XVECEXP (seq, 0, i) = tem;
PREV_INSN (tem) = XVECEXP (seq, 0, i - 1);
NEXT_INSN (XVECEXP (seq, 0, i - 1)) = tem;
/* Remove any REG_DEAD notes because we can't rely on them now
that the insn has been moved. */
for (note = REG_NOTES (tem); note; note = XEXP (note, 1))
if (REG_NOTE_KIND (note) == REG_DEAD)
XEXP (note, 0) = const0_rtx;
}
NEXT_INSN (XVECEXP (seq, 0, length)) = NEXT_INSN (seq_insn);
/* If the previous insn is a SEQUENCE, update the NEXT_INSN pointer on the
last insn in that SEQUENCE to point to us. Similarly for the first
insn in the following insn if it is a SEQUENCE. */
if (PREV_INSN (seq_insn) && GET_CODE (PREV_INSN (seq_insn)) == INSN
&& GET_CODE (PATTERN (PREV_INSN (seq_insn))) == SEQUENCE)
NEXT_INSN (XVECEXP (PATTERN (PREV_INSN (seq_insn)), 0,
XVECLEN (PATTERN (PREV_INSN (seq_insn)), 0) - 1))
= seq_insn;
if (NEXT_INSN (seq_insn) && GET_CODE (NEXT_INSN (seq_insn)) == INSN
&& GET_CODE (PATTERN (NEXT_INSN (seq_insn))) == SEQUENCE)
PREV_INSN (XVECEXP (PATTERN (NEXT_INSN (seq_insn)), 0, 0)) = seq_insn;
/* If there used to be a BARRIER, put it back. */
if (had_barrier)
emit_barrier_after (seq_insn);
if (i != length + 1)
abort ();
return seq_insn;
}
/* Add INSN to DELAY_LIST and return the head of the new list. The list must
be in the order in which the insns are to be executed. */
static rtx
add_to_delay_list (insn, delay_list)
rtx insn;
rtx delay_list;
{
/* If we have an empty list, just make a new list element. If
INSN has its block number recorded, clear it since we may
be moving the insn to a new block. */
if (delay_list == 0)
{
clear_hashed_info_for_insn (insn);
return gen_rtx_INSN_LIST (VOIDmode, insn, NULL_RTX);
}
/* Otherwise this must be an INSN_LIST. Add INSN to the end of the
list. */
XEXP (delay_list, 1) = add_to_delay_list (insn, XEXP (delay_list, 1));
return delay_list;
}
/* Delete INSN from the delay slot of the insn that it is in, which may
produce an insn with no delay slots. Return the new insn. */
static rtx
delete_from_delay_slot (insn)
rtx insn;
{
rtx trial, seq_insn, seq, prev;
rtx delay_list = 0;
int i;
/* We first must find the insn containing the SEQUENCE with INSN in its
delay slot. Do this by finding an insn, TRIAL, where
PREV_INSN (NEXT_INSN (TRIAL)) != TRIAL. */
for (trial = insn;
PREV_INSN (NEXT_INSN (trial)) == trial;
trial = NEXT_INSN (trial))
;
seq_insn = PREV_INSN (NEXT_INSN (trial));
seq = PATTERN (seq_insn);
/* Create a delay list consisting of all the insns other than the one
we are deleting (unless we were the only one). */
if (XVECLEN (seq, 0) > 2)
for (i = 1; i < XVECLEN (seq, 0); i++)
if (XVECEXP (seq, 0, i) != insn)
delay_list = add_to_delay_list (XVECEXP (seq, 0, i), delay_list);
/* Delete the old SEQUENCE, re-emit the insn that used to have the delay
list, and rebuild the delay list if non-empty. */
prev = PREV_INSN (seq_insn);
trial = XVECEXP (seq, 0, 0);
delete_insn (seq_insn);
add_insn_after (trial, prev);
if (GET_CODE (trial) == JUMP_INSN
&& (simplejump_p (trial) || GET_CODE (PATTERN (trial)) == RETURN))
emit_barrier_after (trial);
/* If there are any delay insns, remit them. Otherwise clear the
annul flag. */
if (delay_list)
trial = emit_delay_sequence (trial, delay_list, XVECLEN (seq, 0) - 2);
else
INSN_ANNULLED_BRANCH_P (trial) = 0;
INSN_FROM_TARGET_P (insn) = 0;
/* Show we need to fill this insn again. */
obstack_ptr_grow (&unfilled_slots_obstack, trial);
return trial;
}
/* Delete INSN, a JUMP_INSN. If it is a conditional jump, we must track down
the insn that sets CC0 for it and delete it too. */
static void
delete_scheduled_jump (insn)
rtx insn;
{
/* Delete the insn that sets cc0 for us. On machines without cc0, we could
delete the insn that sets the condition code, but it is hard to find it.
Since this case is rare anyway, don't bother trying; there would likely
be other insns that became dead anyway, which we wouldn't know to
delete. */
#ifdef HAVE_cc0
if (reg_mentioned_p (cc0_rtx, insn))
{
rtx note = find_reg_note (insn, REG_CC_SETTER, NULL_RTX);
/* If a reg-note was found, it points to an insn to set CC0. This
insn is in the delay list of some other insn. So delete it from
the delay list it was in. */
if (note)
{
if (! FIND_REG_INC_NOTE (XEXP (note, 0), NULL_RTX)
&& sets_cc0_p (PATTERN (XEXP (note, 0))) == 1)
delete_from_delay_slot (XEXP (note, 0));
}
else
{
/* The insn setting CC0 is our previous insn, but it may be in
a delay slot. It will be the last insn in the delay slot, if
it is. */
rtx trial = previous_insn (insn);
if (GET_CODE (trial) == NOTE)
trial = prev_nonnote_insn (trial);
if (sets_cc0_p (PATTERN (trial)) != 1
|| FIND_REG_INC_NOTE (trial, 0))
return;
if (PREV_INSN (NEXT_INSN (trial)) == trial)
delete_insn (trial);
else
delete_from_delay_slot (trial);
}
}
#endif
delete_insn (insn);
}
/* Counters for delay-slot filling. */
#define NUM_REORG_FUNCTIONS 2
#define MAX_DELAY_HISTOGRAM 3
#define MAX_REORG_PASSES 2
static int num_insns_needing_delays[NUM_REORG_FUNCTIONS][MAX_REORG_PASSES];
static int num_filled_delays[NUM_REORG_FUNCTIONS][MAX_DELAY_HISTOGRAM+1][MAX_REORG_PASSES];
static int reorg_pass_number;
static void
note_delay_statistics (slots_filled, index)
int slots_filled, index;
{
num_insns_needing_delays[index][reorg_pass_number]++;
if (slots_filled > MAX_DELAY_HISTOGRAM)
slots_filled = MAX_DELAY_HISTOGRAM;
num_filled_delays[index][slots_filled][reorg_pass_number]++;
}
#if defined(ANNUL_IFFALSE_SLOTS) || defined(ANNUL_IFTRUE_SLOTS)
/* Optimize the following cases:
1. When a conditional branch skips over only one instruction,
use an annulling branch and put that insn in the delay slot.
Use either a branch that annuls when the condition if true or
invert the test with a branch that annuls when the condition is
false. This saves insns, since otherwise we must copy an insn
from the L1 target.
(orig) (skip) (otherwise)
Bcc.n L1 Bcc',a L1 Bcc,a L1'
insn insn insn2
L1: L1: L1:
insn2 insn2 insn2
insn3 insn3 L1':
insn3
2. When a conditional branch skips over only one instruction,
and after that, it unconditionally branches somewhere else,
perform the similar optimization. This saves executing the
second branch in the case where the inverted condition is true.
Bcc.n L1 Bcc',a L2
insn insn
L1: L1:
Bra L2 Bra L2
INSN is a JUMP_INSN.
This should be expanded to skip over N insns, where N is the number
of delay slots required. */
static rtx
optimize_skip (insn)
register rtx insn;
{
register rtx trial = next_nonnote_insn (insn);
rtx next_trial = next_active_insn (trial);
rtx delay_list = 0;
rtx target_label;
int flags;
flags = get_jump_flags (insn, JUMP_LABEL (insn));
if (trial == 0
|| GET_CODE (trial) != INSN
|| GET_CODE (PATTERN (trial)) == SEQUENCE
|| recog_memoized (trial) < 0
|| (! eligible_for_annul_false (insn, 0, trial, flags)
&& ! eligible_for_annul_true (insn, 0, trial, flags)))
return 0;
/* There are two cases where we are just executing one insn (we assume
here that a branch requires only one insn; this should be generalized
at some point): Where the branch goes around a single insn or where
we have one insn followed by a branch to the same label we branch to.
In both of these cases, inverting the jump and annulling the delay
slot give the same effect in fewer insns. */
if ((next_trial == next_active_insn (JUMP_LABEL (insn)))
|| (next_trial != 0
&& GET_CODE (next_trial) == JUMP_INSN
&& JUMP_LABEL (insn) == JUMP_LABEL (next_trial)
&& (simplejump_p (next_trial)
|| GET_CODE (PATTERN (next_trial)) == RETURN)))
{
if (eligible_for_annul_false (insn, 0, trial, flags))
{
if (invert_jump (insn, JUMP_LABEL (insn)))
INSN_FROM_TARGET_P (trial) = 1;
else if (! eligible_for_annul_true (insn, 0, trial, flags))
return 0;
}
delay_list = add_to_delay_list (trial, NULL_RTX);
next_trial = next_active_insn (trial);
update_block (trial, trial);
delete_insn (trial);
/* Also, if we are targeting an unconditional
branch, thread our jump to the target of that branch. Don't
change this into a RETURN here, because it may not accept what
we have in the delay slot. We'll fix this up later. */
if (next_trial && GET_CODE (next_trial) == JUMP_INSN
&& (simplejump_p (next_trial)
|| GET_CODE (PATTERN (next_trial)) == RETURN))
{
target_label = JUMP_LABEL (next_trial);
if (target_label == 0)
target_label = find_end_label ();
/* Recompute the flags based on TARGET_LABEL since threading
the jump to TARGET_LABEL may change the direction of the
jump (which may change the circumstances in which the
delay slot is nullified). */
flags = get_jump_flags (insn, target_label);
if (eligible_for_annul_true (insn, 0, trial, flags))
reorg_redirect_jump (insn, target_label);
}
INSN_ANNULLED_BRANCH_P (insn) = 1;
}
return delay_list;
}
#endif
/* Encode and return branch direction and prediction information for
INSN assuming it will jump to LABEL.
Non conditional branches return no direction information and
are predicted as very likely taken. */
static int
get_jump_flags (insn, label)
rtx insn, label;
{
int flags;
/* get_jump_flags can be passed any insn with delay slots, these may
be INSNs, CALL_INSNs, or JUMP_INSNs. Only JUMP_INSNs have branch
direction information, and only if they are conditional jumps.
If LABEL is zero, then there is no way to determine the branch
direction. */
if (GET_CODE (insn) == JUMP_INSN
&& (condjump_p (insn) || condjump_in_parallel_p (insn))
&& INSN_UID (insn) <= max_uid
&& label != 0
&& INSN_UID (label) <= max_uid)
flags
= (uid_to_ruid[INSN_UID (label)] > uid_to_ruid[INSN_UID (insn)])
? ATTR_FLAG_forward : ATTR_FLAG_backward;
/* No valid direction information. */
else
flags = 0;
/* If insn is a conditional branch call mostly_true_jump to get
determine the branch prediction.
Non conditional branches are predicted as very likely taken. */
if (GET_CODE (insn) == JUMP_INSN
&& (condjump_p (insn) || condjump_in_parallel_p (insn)))
{
int prediction;
prediction = mostly_true_jump (insn, get_branch_condition (insn, label));
switch (prediction)
{
case 2:
flags |= (ATTR_FLAG_very_likely | ATTR_FLAG_likely);
break;
case 1:
flags |= ATTR_FLAG_likely;
break;
case 0:
flags |= ATTR_FLAG_unlikely;
break;
case -1:
flags |= (ATTR_FLAG_very_unlikely | ATTR_FLAG_unlikely);
break;
default:
abort();
}
}
else
flags |= (ATTR_FLAG_very_likely | ATTR_FLAG_likely);
return flags;
}
/* Return 1 if INSN is a destination that will be branched to rarely (the
return point of a function); return 2 if DEST will be branched to very
rarely (a call to a function that doesn't return). Otherwise,
return 0. */
static int
rare_destination (insn)
rtx insn;
{
int jump_count = 0;
rtx next;
for (; insn; insn = next)
{
if (GET_CODE (insn) == INSN && GET_CODE (PATTERN (insn)) == SEQUENCE)
insn = XVECEXP (PATTERN (insn), 0, 0);
next = NEXT_INSN (insn);
switch (GET_CODE (insn))
{
case CODE_LABEL:
return 0;
case BARRIER:
/* A BARRIER can either be after a JUMP_INSN or a CALL_INSN. We
don't scan past JUMP_INSNs, so any barrier we find here must
have been after a CALL_INSN and hence mean the call doesn't
return. */
return 2;
case JUMP_INSN:
if (GET_CODE (PATTERN (insn)) == RETURN)
return 1;
else if (simplejump_p (insn)
&& jump_count++ < 10)
next = JUMP_LABEL (insn);
else
return 0;
default:
break;
}
}
/* If we got here it means we hit the end of the function. So this
is an unlikely destination. */
return 1;
}
/* Return truth value of the statement that this branch
is mostly taken. If we think that the branch is extremely likely
to be taken, we return 2. If the branch is slightly more likely to be
taken, return 1. If the branch is slightly less likely to be taken,
return 0 and if the branch is highly unlikely to be taken, return -1.
CONDITION, if non-zero, is the condition that JUMP_INSN is testing. */
static int
mostly_true_jump (jump_insn, condition)
rtx jump_insn, condition;
{
rtx target_label = JUMP_LABEL (jump_insn);
rtx insn;
int rare_dest = rare_destination (target_label);
int rare_fallthrough = rare_destination (NEXT_INSN (jump_insn));
/* If branch probabilities are available, then use that number since it
always gives a correct answer. */
if (flag_branch_probabilities)
{
rtx note = find_reg_note (jump_insn, REG_BR_PROB, 0);
if (note)
{
int prob = XINT (note, 0);
if (prob >= REG_BR_PROB_BASE * 9 / 10)
return 2;
else if (prob >= REG_BR_PROB_BASE / 2)
return 1;
else if (prob >= REG_BR_PROB_BASE / 10)
return 0;
else
return -1;
}
}
/* If this is a branch outside a loop, it is highly unlikely. */
if (GET_CODE (PATTERN (jump_insn)) == SET
&& GET_CODE (SET_SRC (PATTERN (jump_insn))) == IF_THEN_ELSE
&& ((GET_CODE (XEXP (SET_SRC (PATTERN (jump_insn)), 1)) == LABEL_REF
&& LABEL_OUTSIDE_LOOP_P (XEXP (SET_SRC (PATTERN (jump_insn)), 1)))
|| (GET_CODE (XEXP (SET_SRC (PATTERN (jump_insn)), 2)) == LABEL_REF
&& LABEL_OUTSIDE_LOOP_P (XEXP (SET_SRC (PATTERN (jump_insn)), 2)))))
return -1;
if (target_label)
{
/* If this is the test of a loop, it is very likely true. We scan
backwards from the target label. If we find a NOTE_INSN_LOOP_BEG
before the next real insn, we assume the branch is to the top of
the loop. */
for (insn = PREV_INSN (target_label);
insn && GET_CODE (insn) == NOTE;
insn = PREV_INSN (insn))
if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
return 2;
/* If this is a jump to the test of a loop, it is likely true. We scan
forwards from the target label. If we find a NOTE_INSN_LOOP_VTOP
before the next real insn, we assume the branch is to the loop branch
test. */
for (insn = NEXT_INSN (target_label);
insn && GET_CODE (insn) == NOTE;
insn = PREV_INSN (insn))
if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_VTOP)
return 1;
}
/* Look at the relative rarities of the fallthrough and destination. If
they differ, we can predict the branch that way. */
switch (rare_fallthrough - rare_dest)
{
case -2:
return -1;
case -1:
return 0;
case 0:
break;
case 1:
return 1;
case 2:
return 2;
}
/* If we couldn't figure out what this jump was, assume it won't be
taken. This should be rare. */
if (condition == 0)
return 0;
/* EQ tests are usually false and NE tests are usually true. Also,
most quantities are positive, so we can make the appropriate guesses
about signed comparisons against zero. */
switch (GET_CODE (condition))
{
case CONST_INT:
/* Unconditional branch. */
return 1;
case EQ:
return 0;
case NE:
return 1;
case LE:
case LT:
if (XEXP (condition, 1) == const0_rtx)
return 0;
break;
case GE:
case GT:
if (XEXP (condition, 1) == const0_rtx)
return 1;
break;
default:
break;
}
/* Predict backward branches usually take, forward branches usually not. If
we don't know whether this is forward or backward, assume the branch
will be taken, since most are. */
return (target_label == 0 || INSN_UID (jump_insn) > max_uid
|| INSN_UID (target_label) > max_uid
|| (uid_to_ruid[INSN_UID (jump_insn)]
> uid_to_ruid[INSN_UID (target_label)]));;
}
/* Return the condition under which INSN will branch to TARGET. If TARGET
is zero, return the condition under which INSN will return. If INSN is
an unconditional branch, return const_true_rtx. If INSN isn't a simple
type of jump, or it doesn't go to TARGET, return 0. */
static rtx
get_branch_condition (insn, target)
rtx insn;
rtx target;
{
rtx pat = PATTERN (insn);
rtx src;
if (condjump_in_parallel_p (insn))
pat = XVECEXP (pat, 0, 0);
if (GET_CODE (pat) == RETURN)
return target == 0 ? const_true_rtx : 0;
else if (GET_CODE (pat) != SET || SET_DEST (pat) != pc_rtx)
return 0;
src = SET_SRC (pat);
if (GET_CODE (src) == LABEL_REF && XEXP (src, 0) == target)
return const_true_rtx;
else if (GET_CODE (src) == IF_THEN_ELSE
&& ((target == 0 && GET_CODE (XEXP (src, 1)) == RETURN)
|| (GET_CODE (XEXP (src, 1)) == LABEL_REF
&& XEXP (XEXP (src, 1), 0) == target))
&& XEXP (src, 2) == pc_rtx)
return XEXP (src, 0);
else if (GET_CODE (src) == IF_THEN_ELSE
&& ((target == 0 && GET_CODE (XEXP (src, 2)) == RETURN)
|| (GET_CODE (XEXP (src, 2)) == LABEL_REF
&& XEXP (XEXP (src, 2), 0) == target))
&& XEXP (src, 1) == pc_rtx)
return gen_rtx_fmt_ee (reverse_condition (GET_CODE (XEXP (src, 0))),
GET_MODE (XEXP (src, 0)),
XEXP (XEXP (src, 0), 0), XEXP (XEXP (src, 0), 1));
return 0;
}
/* Return non-zero if CONDITION is more strict than the condition of
INSN, i.e., if INSN will always branch if CONDITION is true. */
static int
condition_dominates_p (condition, insn)
rtx condition;
rtx insn;
{
rtx other_condition = get_branch_condition (insn, JUMP_LABEL (insn));
enum rtx_code code = GET_CODE (condition);
enum rtx_code other_code;
if (rtx_equal_p (condition, other_condition)
|| other_condition == const_true_rtx)
return 1;
else if (condition == const_true_rtx || other_condition == 0)
return 0;
other_code = GET_CODE (other_condition);
if (GET_RTX_LENGTH (code) != 2 || GET_RTX_LENGTH (other_code) != 2
|| ! rtx_equal_p (XEXP (condition, 0), XEXP (other_condition, 0))
|| ! rtx_equal_p (XEXP (condition, 1), XEXP (other_condition, 1)))
return 0;
return comparison_dominates_p (code, other_code);
}
/* Return non-zero if redirecting JUMP to NEWLABEL does not invalidate
any insns already in the delay slot of JUMP. */
static int
redirect_with_delay_slots_safe_p (jump, newlabel, seq)
rtx jump, newlabel, seq;
{
int flags, i;
rtx pat = PATTERN (seq);
/* Make sure all the delay slots of this jump would still
be valid after threading the jump. If they are still
valid, then return non-zero. */
flags = get_jump_flags (jump, newlabel);
for (i = 1; i < XVECLEN (pat, 0); i++)
if (! (
#ifdef ANNUL_IFFALSE_SLOTS
(INSN_ANNULLED_BRANCH_P (jump)
&& INSN_FROM_TARGET_P (XVECEXP (pat, 0, i)))
? eligible_for_annul_false (jump, i - 1,
XVECEXP (pat, 0, i), flags) :
#endif
#ifdef ANNUL_IFTRUE_SLOTS
(INSN_ANNULLED_BRANCH_P (jump)
&& ! INSN_FROM_TARGET_P (XVECEXP (pat, 0, i)))
? eligible_for_annul_true (jump, i - 1,
XVECEXP (pat, 0, i), flags) :
#endif
eligible_for_delay (jump, i -1, XVECEXP (pat, 0, i), flags)))
break;
return (i == XVECLEN (pat, 0));
}
/* Return non-zero if redirecting JUMP to NEWLABEL does not invalidate
any insns we wish to place in the delay slot of JUMP. */
static int
redirect_with_delay_list_safe_p (jump, newlabel, delay_list)
rtx jump, newlabel, delay_list;
{
int flags, i;
rtx li;
/* Make sure all the insns in DELAY_LIST would still be
valid after threading the jump. If they are still
valid, then return non-zero. */
flags = get_jump_flags (jump, newlabel);
for (li = delay_list, i = 0; li; li = XEXP (li, 1), i++)
if (! (
#ifdef ANNUL_IFFALSE_SLOTS
(INSN_ANNULLED_BRANCH_P (jump)
&& INSN_FROM_TARGET_P (XEXP (li, 0)))
? eligible_for_annul_false (jump, i, XEXP (li, 0), flags) :
#endif
#ifdef ANNUL_IFTRUE_SLOTS
(INSN_ANNULLED_BRANCH_P (jump)
&& ! INSN_FROM_TARGET_P (XEXP (li, 0)))
? eligible_for_annul_true (jump, i, XEXP (li, 0), flags) :
#endif
eligible_for_delay (jump, i, XEXP (li, 0), flags)))
break;
return (li == NULL);
}
/* DELAY_LIST is a list of insns that have already been placed into delay
slots. See if all of them have the same annulling status as ANNUL_TRUE_P.
If not, return 0; otherwise return 1. */
static int
check_annul_list_true_false (annul_true_p, delay_list)
int annul_true_p;
rtx delay_list;
{
rtx temp;
if (delay_list)
{
for (temp = delay_list; temp; temp = XEXP (temp, 1))
{
rtx trial = XEXP (temp, 0);
if ((annul_true_p && INSN_FROM_TARGET_P (trial))
|| (!annul_true_p && !INSN_FROM_TARGET_P (trial)))
return 0;
}
}
return 1;
}
/* INSN branches to an insn whose pattern SEQ is a SEQUENCE. Given that
the condition tested by INSN is CONDITION and the resources shown in
OTHER_NEEDED are needed after INSN, see whether INSN can take all the insns
from SEQ's delay list, in addition to whatever insns it may execute
(in DELAY_LIST). SETS and NEEDED are denote resources already set and
needed while searching for delay slot insns. Return the concatenated
delay list if possible, otherwise, return 0.
SLOTS_TO_FILL is the total number of slots required by INSN, and
PSLOTS_FILLED points to the number filled so far (also the number of
insns in DELAY_LIST). It is updated with the number that have been
filled from the SEQUENCE, if any.
PANNUL_P points to a non-zero value if we already know that we need
to annul INSN. If this routine determines that annulling is needed,
it may set that value non-zero.
PNEW_THREAD points to a location that is to receive the place at which
execution should continue. */
static rtx
steal_delay_list_from_target (insn, condition, seq, delay_list,
sets, needed, other_needed,
slots_to_fill, pslots_filled, pannul_p,
pnew_thread)
rtx insn, condition;
rtx seq;
rtx delay_list;
struct resources *sets, *needed, *other_needed;
int slots_to_fill;
int *pslots_filled;
int *pannul_p;
rtx *pnew_thread;
{
rtx temp;
int slots_remaining = slots_to_fill - *pslots_filled;
int total_slots_filled = *pslots_filled;
rtx new_delay_list = 0;
int must_annul = *pannul_p;
int used_annul = 0;
int i;
struct resources cc_set;
/* We can't do anything if there are more delay slots in SEQ than we
can handle, or if we don't know that it will be a taken branch.
We know that it will be a taken branch if it is either an unconditional
branch or a conditional branch with a stricter branch condition.
Also, exit if the branch has more than one set, since then it is computing
other results that can't be ignored, e.g. the HPPA mov&branch instruction.
??? It may be possible to move other sets into INSN in addition to
moving the instructions in the delay slots.
We can not steal the delay list if one of the instructions in the
current delay_list modifies the condition codes and the jump in the
sequence is a conditional jump. We can not do this because we can
not change the direction of the jump because the condition codes
will effect the direction of the jump in the sequence. */
CLEAR_RESOURCE (&cc_set);
for (temp = delay_list; temp; temp = XEXP (temp, 1))
{
rtx trial = XEXP (temp, 0);
mark_set_resources (trial, &cc_set, 0, 1);
if (insn_references_resource_p (XVECEXP (seq , 0, 0), &cc_set, 0))
return delay_list;
}
if (XVECLEN (seq, 0) - 1 > slots_remaining
|| ! condition_dominates_p (condition, XVECEXP (seq, 0, 0))
|| ! single_set (XVECEXP (seq, 0, 0)))
return delay_list;
for (i = 1; i < XVECLEN (seq, 0); i++)
{
rtx trial = XVECEXP (seq, 0, i);
int flags;
if (insn_references_resource_p (trial, sets, 0)
|| insn_sets_resource_p (trial, needed, 0)
|| insn_sets_resource_p (trial, sets, 0)
#ifdef HAVE_cc0
/* If TRIAL sets CC0, we can't copy it, so we can't steal this
delay list. */
|| find_reg_note (trial, REG_CC_USER, NULL_RTX)
#endif
/* If TRIAL is from the fallthrough code of an annulled branch insn
in SEQ, we cannot use it. */
|| (INSN_ANNULLED_BRANCH_P (XVECEXP (seq, 0, 0))
&& ! INSN_FROM_TARGET_P (trial)))
return delay_list;
/* If this insn was already done (usually in a previous delay slot),
pretend we put it in our delay slot. */
if (redundant_insn (trial, insn, new_delay_list))
continue;
/* We will end up re-vectoring this branch, so compute flags
based on jumping to the new label. */
flags = get_jump_flags (insn, JUMP_LABEL (XVECEXP (seq, 0, 0)));
if (! must_annul
&& ((condition == const_true_rtx
|| (! insn_sets_resource_p (trial, other_needed, 0)
&& ! may_trap_p (PATTERN (trial)))))
? eligible_for_delay (insn, total_slots_filled, trial, flags)
: (must_annul || (delay_list == NULL && new_delay_list == NULL))
&& (must_annul = 1,
check_annul_list_true_false (0, delay_list)
&& check_annul_list_true_false (0, new_delay_list)
&& eligible_for_annul_false (insn, total_slots_filled,
trial, flags)))
{
if (must_annul)
used_annul = 1;
temp = copy_rtx (trial);
INSN_FROM_TARGET_P (temp) = 1;
new_delay_list = add_to_delay_list (temp, new_delay_list);
total_slots_filled++;
if (--slots_remaining == 0)
break;
}
else
return delay_list;
}
/* Show the place to which we will be branching. */
*pnew_thread = next_active_insn (JUMP_LABEL (XVECEXP (seq, 0, 0)));
/* Add any new insns to the delay list and update the count of the
number of slots filled. */
*pslots_filled = total_slots_filled;
if (used_annul)
*pannul_p = 1;
if (delay_list == 0)
return new_delay_list;
for (temp = new_delay_list; temp; temp = XEXP (temp, 1))
delay_list = add_to_delay_list (XEXP (temp, 0), delay_list);
return delay_list;
}
/* Similar to steal_delay_list_from_target except that SEQ is on the
fallthrough path of INSN. Here we only do something if the delay insn
of SEQ is an unconditional branch. In that case we steal its delay slot
for INSN since unconditional branches are much easier to fill. */
static rtx
steal_delay_list_from_fallthrough (insn, condition, seq,
delay_list, sets, needed, other_needed,
slots_to_fill, pslots_filled, pannul_p)
rtx insn, condition;
rtx seq;
rtx delay_list;
struct resources *sets, *needed, *other_needed;
int slots_to_fill;
int *pslots_filled;
int *pannul_p;
{
int i;
int flags;
int must_annul = *pannul_p;
int used_annul = 0;
flags = get_jump_flags (insn, JUMP_LABEL (insn));
/* We can't do anything if SEQ's delay insn isn't an
unconditional branch. */
if (! simplejump_p (XVECEXP (seq, 0, 0))
&& GET_CODE (PATTERN (XVECEXP (seq, 0, 0))) != RETURN)
return delay_list;
for (i = 1; i < XVECLEN (seq, 0); i++)
{
rtx trial = XVECEXP (seq, 0, i);
/* If TRIAL sets CC0, stealing it will move it too far from the use
of CC0. */
if (insn_references_resource_p (trial, sets, 0)
|| insn_sets_resource_p (trial, needed, 0)
|| insn_sets_resource_p (trial, sets, 0)
#ifdef HAVE_cc0
|| sets_cc0_p (PATTERN (trial))
#endif
)
break;
/* If this insn was already done, we don't need it. */
if (redundant_insn (trial, insn, delay_list))
{
delete_from_delay_slot (trial);
continue;
}
if (! must_annul
&& ((condition == const_true_rtx
|| (! insn_sets_resource_p (trial, other_needed, 0)
&& ! may_trap_p (PATTERN (trial)))))
? eligible_for_delay (insn, *pslots_filled, trial, flags)
: (must_annul || delay_list == NULL) && (must_annul = 1,
check_annul_list_true_false (1, delay_list)
&& eligible_for_annul_true (insn, *pslots_filled, trial, flags)))
{
if (must_annul)
used_annul = 1;
delete_from_delay_slot (trial);
delay_list = add_to_delay_list (trial, delay_list);
if (++(*pslots_filled) == slots_to_fill)
break;
}
else
break;
}
if (used_annul)
*pannul_p = 1;
return delay_list;
}
/* Try merging insns starting at THREAD which match exactly the insns in
INSN's delay list.
If all insns were matched and the insn was previously annulling, the
annul bit will be cleared.
For each insn that is merged, if the branch is or will be non-annulling,
we delete the merged insn. */
static void
try_merge_delay_insns (insn, thread)
rtx insn, thread;
{
rtx trial, next_trial;
rtx delay_insn = XVECEXP (PATTERN (insn), 0, 0);
int annul_p = INSN_ANNULLED_BRANCH_P (delay_insn);
int slot_number = 1;
int num_slots = XVECLEN (PATTERN (insn), 0);
rtx next_to_match = XVECEXP (PATTERN (insn), 0, slot_number);
struct resources set, needed;
rtx merged_insns = 0;
int i;
int flags;
flags = get_jump_flags (delay_insn, JUMP_LABEL (delay_insn));
CLEAR_RESOURCE (&needed);
CLEAR_RESOURCE (&set);
/* If this is not an annulling branch, take into account anything needed in
INSN's delay slot. This prevents two increments from being incorrectly
folded into one. If we are annulling, this would be the correct
thing to do. (The alternative, looking at things set in NEXT_TO_MATCH
will essentially disable this optimization. This method is somewhat of
a kludge, but I don't see a better way.) */
if (! annul_p)
for (i = 1 ; i < num_slots ; i++)
if (XVECEXP (PATTERN (insn), 0, i))
mark_referenced_resources (XVECEXP (PATTERN (insn), 0, i), &needed, 1);
for (trial = thread; !stop_search_p (trial, 1); trial = next_trial)
{
rtx pat = PATTERN (trial);
rtx oldtrial = trial;
next_trial = next_nonnote_insn (trial);
/* TRIAL must be a CALL_INSN or INSN. Skip USE and CLOBBER. */
if (GET_CODE (trial) == INSN
&& (GET_CODE (pat) == USE || GET_CODE (pat) == CLOBBER))
continue;
if (GET_CODE (next_to_match) == GET_CODE (trial)
#ifdef HAVE_cc0
/* We can't share an insn that sets cc0. */
&& ! sets_cc0_p (pat)
#endif
&& ! insn_references_resource_p (trial, &set, 1)
&& ! insn_sets_resource_p (trial, &set, 1)
&& ! insn_sets_resource_p (trial, &needed, 1)
&& (trial = try_split (pat, trial, 0)) != 0
/* Update next_trial, in case try_split succeeded. */
&& (next_trial = next_nonnote_insn (trial))
/* Likewise THREAD. */
&& (thread = oldtrial == thread ? trial : thread)
&& rtx_equal_p (PATTERN (next_to_match), PATTERN (trial))
/* Have to test this condition if annul condition is different
from (and less restrictive than) non-annulling one. */
&& eligible_for_delay (delay_insn, slot_number - 1, trial, flags))
{
if (! annul_p)
{
update_block (trial, thread);
if (trial == thread)
thread = next_active_insn (thread);
delete_insn (trial);
INSN_FROM_TARGET_P (next_to_match) = 0;
}
else
merged_insns = gen_rtx_INSN_LIST (VOIDmode, trial, merged_insns);
if (++slot_number == num_slots)
break;
next_to_match = XVECEXP (PATTERN (insn), 0, slot_number);
}
mark_set_resources (trial, &set, 0, 1);
mark_referenced_resources (trial, &needed, 1);
}
/* See if we stopped on a filled insn. If we did, try to see if its
delay slots match. */
if (slot_number != num_slots
&& trial && GET_CODE (trial) == INSN
&& GET_CODE (PATTERN (trial)) == SEQUENCE
&& ! INSN_ANNULLED_BRANCH_P (XVECEXP (PATTERN (trial), 0, 0)))
{
rtx pat = PATTERN (trial);
rtx filled_insn = XVECEXP (pat, 0, 0);
/* Account for resources set/needed by the filled insn. */
mark_set_resources (filled_insn, &set, 0, 1);
mark_referenced_resources (filled_insn, &needed, 1);
for (i = 1; i < XVECLEN (pat, 0); i++)
{
rtx dtrial = XVECEXP (pat, 0, i);
if (! insn_references_resource_p (dtrial, &set, 1)
&& ! insn_sets_resource_p (dtrial, &set, 1)
&& ! insn_sets_resource_p (dtrial, &needed, 1)
#ifdef HAVE_cc0
&& ! sets_cc0_p (PATTERN (dtrial))
#endif
&& rtx_equal_p (PATTERN (next_to_match), PATTERN (dtrial))
&& eligible_for_delay (delay_insn, slot_number - 1, dtrial, flags))
{
if (! annul_p)
{
rtx new;
update_block (dtrial, thread);
new = delete_from_delay_slot (dtrial);
if (INSN_DELETED_P (thread))
thread = new;
INSN_FROM_TARGET_P (next_to_match) = 0;
}
else
merged_insns = gen_rtx_INSN_LIST (SImode, dtrial,
merged_insns);
if (++slot_number == num_slots)
break;
next_to_match = XVECEXP (PATTERN (insn), 0, slot_number);
}
else
{
/* Keep track of the set/referenced resources for the delay
slots of any trial insns we encounter. */
mark_set_resources (dtrial, &set, 0, 1);
mark_referenced_resources (dtrial, &needed, 1);
}
}
}
/* If all insns in the delay slot have been matched and we were previously
annulling the branch, we need not any more. In that case delete all the
merged insns. Also clear the INSN_FROM_TARGET_P bit of each insn in
the delay list so that we know that it isn't only being used at the
target. */
if (slot_number == num_slots && annul_p)
{
for (; merged_insns; merged_insns = XEXP (merged_insns, 1))
{
if (GET_MODE (merged_insns) == SImode)
{
rtx new;
update_block (XEXP (merged_insns, 0), thread);
new = delete_from_delay_slot (XEXP (merged_insns, 0));
if (INSN_DELETED_P (thread))
thread = new;
}
else
{
update_block (XEXP (merged_insns, 0), thread);
delete_insn (XEXP (merged_insns, 0));
}
}
INSN_ANNULLED_BRANCH_P (delay_insn) = 0;
for (i = 0; i < XVECLEN (PATTERN (insn), 0); i++)
INSN_FROM_TARGET_P (XVECEXP (PATTERN (insn), 0, i)) = 0;
}
}
/* See if INSN is redundant with an insn in front of TARGET. Often this
is called when INSN is a candidate for a delay slot of TARGET.
DELAY_LIST are insns that will be placed in delay slots of TARGET in front
of INSN. Often INSN will be redundant with an insn in a delay slot of
some previous insn. This happens when we have a series of branches to the
same label; in that case the first insn at the target might want to go
into each of the delay slots.
If we are not careful, this routine can take up a significant fraction
of the total compilation time (4%), but only wins rarely. Hence we
speed this routine up by making two passes. The first pass goes back
until it hits a label and sees if it find an insn with an identical
pattern. Only in this (relatively rare) event does it check for
data conflicts.
We do not split insns we encounter. This could cause us not to find a
redundant insn, but the cost of splitting seems greater than the possible
gain in rare cases. */
static rtx
redundant_insn (insn, target, delay_list)
rtx insn;
rtx target;
rtx delay_list;
{
rtx target_main = target;
rtx ipat = PATTERN (insn);
rtx trial, pat;
struct resources needed, set;
int i;
/* If INSN has any REG_UNUSED notes, it can't match anything since we
are allowed to not actually assign to such a register. */
if (find_reg_note (insn, REG_UNUSED, NULL_RTX) != 0)
return 0;
/* Scan backwards looking for a match. */
for (trial = PREV_INSN (target); trial; trial = PREV_INSN (trial))
{
if (GET_CODE (trial) == CODE_LABEL)
return 0;
if (GET_RTX_CLASS (GET_CODE (trial)) != 'i')
continue;
pat = PATTERN (trial);
if (GET_CODE (pat) == USE || GET_CODE (pat) == CLOBBER)
continue;
if (GET_CODE (pat) == SEQUENCE)
{
/* Stop for a CALL and its delay slots because it is difficult to
track its resource needs correctly. */
if (GET_CODE (XVECEXP (pat, 0, 0)) == CALL_INSN)
return 0;
/* Stop for an INSN or JUMP_INSN with delayed effects and its delay
slots because it is difficult to track its resource needs
correctly. */
#ifdef INSN_SETS_ARE_DELAYED
if (INSN_SETS_ARE_DELAYED (XVECEXP (pat, 0, 0)))
return 0;
#endif
#ifdef INSN_REFERENCES_ARE_DELAYED
if (INSN_REFERENCES_ARE_DELAYED (XVECEXP (pat, 0, 0)))
return 0;
#endif
/* See if any of the insns in the delay slot match, updating
resource requirements as we go. */
for (i = XVECLEN (pat, 0) - 1; i > 0; i--)
if (GET_CODE (XVECEXP (pat, 0, i)) == GET_CODE (insn)
&& rtx_equal_p (PATTERN (XVECEXP (pat, 0, i)), ipat)
&& ! find_reg_note (XVECEXP (pat, 0, i), REG_UNUSED, NULL_RTX))
break;
/* If found a match, exit this loop early. */
if (i > 0)
break;
}
else if (GET_CODE (trial) == GET_CODE (insn) && rtx_equal_p (pat, ipat)
&& ! find_reg_note (trial, REG_UNUSED, NULL_RTX))
break;
}
/* If we didn't find an insn that matches, return 0. */
if (trial == 0)
return 0;
/* See what resources this insn sets and needs. If they overlap, or
if this insn references CC0, it can't be redundant. */
CLEAR_RESOURCE (&needed);
CLEAR_RESOURCE (&set);
mark_set_resources (insn, &set, 0, 1);
mark_referenced_resources (insn, &needed, 1);
/* If TARGET is a SEQUENCE, get the main insn. */
if (GET_CODE (target) == INSN && GET_CODE (PATTERN (target)) == SEQUENCE)
target_main = XVECEXP (PATTERN (target), 0, 0);
if (resource_conflicts_p (&needed, &set)
#ifdef HAVE_cc0
|| reg_mentioned_p (cc0_rtx, ipat)
#endif
/* The insn requiring the delay may not set anything needed or set by
INSN. */
|| insn_sets_resource_p (target_main, &needed, 1)
|| insn_sets_resource_p (target_main, &set, 1))
return 0;
/* Insns we pass may not set either NEEDED or SET, so merge them for
simpler tests. */
needed.memory |= set.memory;
needed.unch_memory |= set.unch_memory;
IOR_HARD_REG_SET (needed.regs, set.regs);
/* This insn isn't redundant if it conflicts with an insn that either is
or will be in a delay slot of TARGET. */
while (delay_list)
{
if (insn_sets_resource_p (XEXP (delay_list, 0), &needed, 1))
return 0;
delay_list = XEXP (delay_list, 1);
}
if (GET_CODE (target) == INSN && GET_CODE (PATTERN (target)) == SEQUENCE)
for (i = 1; i < XVECLEN (PATTERN (target), 0); i++)
if (insn_sets_resource_p (XVECEXP (PATTERN (target), 0, i), &needed, 1))
return 0;
/* Scan backwards until we reach a label or an insn that uses something
INSN sets or sets something insn uses or sets. */
for (trial = PREV_INSN (target);
trial && GET_CODE (trial) != CODE_LABEL;
trial = PREV_INSN (trial))
{
if (GET_CODE (trial) != INSN && GET_CODE (trial) != CALL_INSN
&& GET_CODE (trial) != JUMP_INSN)
continue;
pat = PATTERN (trial);
if (GET_CODE (pat) == USE || GET_CODE (pat) == CLOBBER)
continue;
if (GET_CODE (pat) == SEQUENCE)
{
/* If this is a CALL_INSN and its delay slots, it is hard to track
the resource needs properly, so give up. */
if (GET_CODE (XVECEXP (pat, 0, 0)) == CALL_INSN)
return 0;
/* If this is an INSN or JUMP_INSN with delayed effects, it
is hard to track the resource needs properly, so give up. */
#ifdef INSN_SETS_ARE_DELAYED
if (INSN_SETS_ARE_DELAYED (XVECEXP (pat, 0, 0)))
return 0;
#endif
#ifdef INSN_REFERENCES_ARE_DELAYED
if (INSN_REFERENCES_ARE_DELAYED (XVECEXP (pat, 0, 0)))
return 0;
#endif
/* See if any of the insns in the delay slot match, updating
resource requirements as we go. */
for (i = XVECLEN (pat, 0) - 1; i > 0; i--)
{
rtx candidate = XVECEXP (pat, 0, i);
/* If an insn will be annulled if the branch is false, it isn't
considered as a possible duplicate insn. */
if (rtx_equal_p (PATTERN (candidate), ipat)
&& ! (INSN_ANNULLED_BRANCH_P (XVECEXP (pat, 0, 0))
&& INSN_FROM_TARGET_P (candidate)))
{
/* Show that this insn will be used in the sequel. */
INSN_FROM_TARGET_P (candidate) = 0;
return candidate;
}
/* Unless this is an annulled insn from the target of a branch,
we must stop if it sets anything needed or set by INSN. */
if ((! INSN_ANNULLED_BRANCH_P (XVECEXP (pat, 0, 0))
|| ! INSN_FROM_TARGET_P (candidate))
&& insn_sets_resource_p (candidate, &needed, 1))
return 0;
}
/* If the insn requiring the delay slot conflicts with INSN, we
must stop. */
if (insn_sets_resource_p (XVECEXP (pat, 0, 0), &needed, 1))
return 0;
}
else
{
/* See if TRIAL is the same as INSN. */
pat = PATTERN (trial);
if (rtx_equal_p (pat, ipat))
return trial;
/* Can't go any further if TRIAL conflicts with INSN. */
if (insn_sets_resource_p (trial, &needed, 1))
return 0;
}
}
return 0;
}
/* Return 1 if THREAD can only be executed in one way. If LABEL is non-zero,
it is the target of the branch insn being scanned. If ALLOW_FALLTHROUGH
is non-zero, we are allowed to fall into this thread; otherwise, we are
not.
If LABEL is used more than one or we pass a label other than LABEL before
finding an active insn, we do not own this thread. */
static int
own_thread_p (thread, label, allow_fallthrough)
rtx thread;
rtx label;
int allow_fallthrough;
{
rtx active_insn;
rtx insn;
/* We don't own the function end. */
if (thread == 0)
return 0;
/* Get the first active insn, or THREAD, if it is an active insn. */
active_insn = next_active_insn (PREV_INSN (thread));
for (insn = thread; insn != active_insn; insn = NEXT_INSN (insn))
if (GET_CODE (insn) == CODE_LABEL
&& (insn != label || LABEL_NUSES (insn) != 1))
return 0;
if (allow_fallthrough)
return 1;
/* Ensure that we reach a BARRIER before any insn or label. */
for (insn = prev_nonnote_insn (thread);
insn == 0 || GET_CODE (insn) != BARRIER;
insn = prev_nonnote_insn (insn))
if (insn == 0
|| GET_CODE (insn) == CODE_LABEL
|| (GET_CODE (insn) == INSN
&& GET_CODE (PATTERN (insn)) != USE
&& GET_CODE (PATTERN (insn)) != CLOBBER))
return 0;
return 1;
}
/* Called when INSN is being moved from a location near the target of a jump.
We leave a marker of the form (use (INSN)) immediately in front
of WHERE for mark_target_live_regs. These markers will be deleted when
reorg finishes.
We used to try to update the live status of registers if WHERE is at
the start of a basic block, but that can't work since we may remove a
BARRIER in relax_delay_slots. */
static void
update_block (insn, where)
rtx insn;
rtx where;
{
/* Ignore if this was in a delay slot and it came from the target of
a branch. */
if (INSN_FROM_TARGET_P (insn))
return;
emit_insn_before (gen_rtx_USE (VOIDmode, insn), where);
/* INSN might be making a value live in a block where it didn't use to
be. So recompute liveness information for this block. */
incr_ticks_for_insn (insn);
}
/* Similar to REDIRECT_JUMP except that we update the BB_TICKS entry for
the basic block containing the jump. */
static int
reorg_redirect_jump (jump, nlabel)
rtx jump;
rtx nlabel;
{
incr_ticks_for_insn (jump);
return redirect_jump (jump, nlabel);
}
/* Called when INSN is being moved forward into a delay slot of DELAYED_INSN.
We check every instruction between INSN and DELAYED_INSN for REG_DEAD notes
that reference values used in INSN. If we find one, then we move the
REG_DEAD note to INSN.
This is needed to handle the case where an later insn (after INSN) has a
REG_DEAD note for a register used by INSN, and this later insn subsequently
gets moved before a CODE_LABEL because it is a redundant insn. In this
case, mark_target_live_regs may be confused into thinking the register
is dead because it sees a REG_DEAD note immediately before a CODE_LABEL. */
static void
update_reg_dead_notes (insn, delayed_insn)
rtx insn, delayed_insn;
{
rtx p, link, next;
for (p = next_nonnote_insn (insn); p != delayed_insn;
p = next_nonnote_insn (p))
for (link = REG_NOTES (p); link; link = next)
{
next = XEXP (link, 1);
if (REG_NOTE_KIND (link) != REG_DEAD
|| GET_CODE (XEXP (link, 0)) != REG)
continue;
if (reg_referenced_p (XEXP (link, 0), PATTERN (insn)))
{
/* Move the REG_DEAD note from P to INSN. */
remove_note (p, link);
XEXP (link, 1) = REG_NOTES (insn);
REG_NOTES (insn) = link;
}
}
}
/* Called when an insn redundant with start_insn is deleted. If there
is a REG_DEAD note for the target of start_insn between start_insn
and stop_insn, then the REG_DEAD note needs to be deleted since the
value no longer dies there.
If the REG_DEAD note isn't deleted, then mark_target_live_regs may be
confused into thinking the register is dead. */
static void
fix_reg_dead_note (start_insn, stop_insn)
rtx start_insn, stop_insn;
{
rtx p, link, next;
for (p = next_nonnote_insn (start_insn); p != stop_insn;
p = next_nonnote_insn (p))
for (link = REG_NOTES (p); link; link = next)
{
next = XEXP (link, 1);
if (REG_NOTE_KIND (link) != REG_DEAD
|| GET_CODE (XEXP (link, 0)) != REG)
continue;
if (reg_set_p (XEXP (link, 0), PATTERN (start_insn)))
{
remove_note (p, link);
return;
}
}
}
/* Delete any REG_UNUSED notes that exist on INSN but not on REDUNDANT_INSN.
This handles the case of udivmodXi4 instructions which optimize their
output depending on whether any REG_UNUSED notes are present.
we must make sure that INSN calculates as many results as REDUNDANT_INSN
does. */
static void
update_reg_unused_notes (insn, redundant_insn)
rtx insn, redundant_insn;
{
rtx link, next;
for (link = REG_NOTES (insn); link; link = next)
{
next = XEXP (link, 1);
if (REG_NOTE_KIND (link) != REG_UNUSED
|| GET_CODE (XEXP (link, 0)) != REG)
continue;
if (! find_regno_note (redundant_insn, REG_UNUSED,
REGNO (XEXP (link, 0))))
remove_note (insn, link);
}
}
/* Scan a function looking for insns that need a delay slot and find insns to
put into the delay slot.
NON_JUMPS_P is non-zero if we are to only try to fill non-jump insns (such
as calls). We do these first since we don't want jump insns (that are
easier to fill) to get the only insns that could be used for non-jump insns.
When it is zero, only try to fill JUMP_INSNs.
When slots are filled in this manner, the insns (including the
delay_insn) are put together in a SEQUENCE rtx. In this fashion,
it is possible to tell whether a delay slot has really been filled
or not. `final' knows how to deal with this, by communicating
through FINAL_SEQUENCE. */
static void
fill_simple_delay_slots (non_jumps_p)
int non_jumps_p;
{
register rtx insn, pat, trial, next_trial;
register int i;
int num_unfilled_slots = unfilled_slots_next - unfilled_slots_base;
struct resources needed, set;
int slots_to_fill, slots_filled;
rtx delay_list;
for (i = 0; i < num_unfilled_slots; i++)
{
int flags;
/* Get the next insn to fill. If it has already had any slots assigned,
we can't do anything with it. Maybe we'll improve this later. */
insn = unfilled_slots_base[i];
if (insn == 0
|| INSN_DELETED_P (insn)
|| (GET_CODE (insn) == INSN
&& GET_CODE (PATTERN (insn)) == SEQUENCE)
|| (GET_CODE (insn) == JUMP_INSN && non_jumps_p)
|| (GET_CODE (insn) != JUMP_INSN && ! non_jumps_p))
continue;
if (GET_CODE (insn) == JUMP_INSN)
flags = get_jump_flags (insn, JUMP_LABEL (insn));
else
flags = get_jump_flags (insn, NULL_RTX);
slots_to_fill = num_delay_slots (insn);
/* Some machine description have defined instructions to have
delay slots only in certain circumstances which may depend on
nearby insns (which change due to reorg's actions).
For example, the PA port normally has delay slots for unconditional
jumps.
However, the PA port claims such jumps do not have a delay slot
if they are immediate successors of certain CALL_INSNs. This
allows the port to favor filling the delay slot of the call with
the unconditional jump. */
if (slots_to_fill == 0)
continue;
/* This insn needs, or can use, some delay slots. SLOTS_TO_FILL
says how many. After initialization, first try optimizing
call _foo call _foo
nop add %o7,.-L1,%o7
b,a L1
nop
If this case applies, the delay slot of the call is filled with
the unconditional jump. This is done first to avoid having the
delay slot of the call filled in the backward scan. Also, since
the unconditional jump is likely to also have a delay slot, that
insn must exist when it is subsequently scanned.
This is tried on each insn with delay slots as some machines
have insns which perform calls, but are not represented as
CALL_INSNs. */
slots_filled = 0;
delay_list = 0;
if ((trial = next_active_insn (insn))
&& GET_CODE (trial) == JUMP_INSN
&& simplejump_p (trial)
&& eligible_for_delay (insn, slots_filled, trial, flags)
&& no_labels_between_p (insn, trial))
{
rtx *tmp;
slots_filled++;
delay_list = add_to_delay_list (trial, delay_list);
/* TRIAL may have had its delay slot filled, then unfilled. When
the delay slot is unfilled, TRIAL is placed back on the unfilled
slots obstack. Unfortunately, it is placed on the end of the
obstack, not in its original location. Therefore, we must search
from entry i + 1 to the end of the unfilled slots obstack to
try and find TRIAL. */
tmp = &unfilled_slots_base[i + 1];
while (*tmp != trial && tmp != unfilled_slots_next)
tmp++;
/* Remove the unconditional jump from consideration for delay slot
filling and unthread it. */
if (*tmp == trial)
*tmp = 0;
{
rtx next = NEXT_INSN (trial);
rtx prev = PREV_INSN (trial);
if (prev)
NEXT_INSN (prev) = next;
if (next)
PREV_INSN (next) = prev;
}
}
/* Now, scan backwards from the insn to search for a potential
delay-slot candidate. Stop searching when a label or jump is hit.
For each candidate, if it is to go into the delay slot (moved
forward in execution sequence), it must not need or set any resources
that were set by later insns and must not set any resources that
are needed for those insns.
The delay slot insn itself sets resources unless it is a call
(in which case the called routine, not the insn itself, is doing
the setting). */
if (slots_filled < slots_to_fill)
{
CLEAR_RESOURCE (&needed);
CLEAR_RESOURCE (&set);
mark_set_resources (insn, &set, 0, 0);
mark_referenced_resources (insn, &needed, 0);
for (trial = prev_nonnote_insn (insn); ! stop_search_p (trial, 1);
trial = next_trial)
{
next_trial = prev_nonnote_insn (trial);
/* This must be an INSN or CALL_INSN. */
pat = PATTERN (trial);
/* USE and CLOBBER at this level was just for flow; ignore it. */
if (GET_CODE (pat) == USE || GET_CODE (pat) == CLOBBER)
continue;
/* Check for resource conflict first, to avoid unnecessary
splitting. */
if (! insn_references_resource_p (trial, &set, 1)
&& ! insn_sets_resource_p (trial, &set, 1)
&& ! insn_sets_resource_p (trial, &needed, 1)
#ifdef HAVE_cc0
/* Can't separate set of cc0 from its use. */
&& ! (reg_mentioned_p (cc0_rtx, pat)
&& ! sets_cc0_p (pat))
#endif
)
{
trial = try_split (pat, trial, 1);
next_trial = prev_nonnote_insn (trial);
if (eligible_for_delay (insn, slots_filled, trial, flags))
{
/* In this case, we are searching backward, so if we
find insns to put on the delay list, we want
to put them at the head, rather than the
tail, of the list. */
update_reg_dead_notes (trial, insn);
delay_list = gen_rtx_INSN_LIST (VOIDmode,
trial, delay_list);
update_block (trial, trial);
delete_insn (trial);
if (slots_to_fill == ++slots_filled)
break;
continue;
}
}
mark_set_resources (trial, &set, 0, 1);
mark_referenced_resources (trial, &needed, 1);
}
}
/* If all needed slots haven't been filled, we come here. */
/* Try to optimize case of jumping around a single insn. */
#if defined(ANNUL_IFFALSE_SLOTS) || defined(ANNUL_IFTRUE_SLOTS)
if (slots_filled != slots_to_fill
&& delay_list == 0
&& GET_CODE (insn) == JUMP_INSN
&& (condjump_p (insn) || condjump_in_parallel_p (insn)))
{
delay_list = optimize_skip (insn);
if (delay_list)
slots_filled += 1;
}
#endif
/* Try to get insns from beyond the insn needing the delay slot.
These insns can neither set or reference resources set in insns being
skipped, cannot set resources in the insn being skipped, and, if this
is a CALL_INSN (or a CALL_INSN is passed), cannot trap (because the
call might not return).
There used to be code which continued past the target label if
we saw all uses of the target label. This code did not work,
because it failed to account for some instructions which were
both annulled and marked as from the target. This can happen as a
result of optimize_skip. Since this code was redundant with
fill_eager_delay_slots anyways, it was just deleted. */
if (slots_filled != slots_to_fill
&& (GET_CODE (insn) != JUMP_INSN
|| ((condjump_p (insn) || condjump_in_parallel_p (insn))
&& ! simplejump_p (insn)
&& JUMP_LABEL (insn) != 0)))
{
rtx target = 0;
int maybe_never = 0;
struct resources needed_at_jump;
CLEAR_RESOURCE (&needed);
CLEAR_RESOURCE (&set);
if (GET_CODE (insn) == CALL_INSN)
{
mark_set_resources (insn, &set, 0, 1);
mark_referenced_resources (insn, &needed, 1);
maybe_never = 1;
}
else
{
mark_set_resources (insn, &set, 0, 1);
mark_referenced_resources (insn, &needed, 1);
if (GET_CODE (insn) == JUMP_INSN)
target = JUMP_LABEL (insn);
}
for (trial = next_nonnote_insn (insn); trial; trial = next_trial)
{
rtx pat, trial_delay;
next_trial = next_nonnote_insn (trial);
if (GET_CODE (trial) == CODE_LABEL
|| GET_CODE (trial) == BARRIER)
break;
/* We must have an INSN, JUMP_INSN, or CALL_INSN. */
pat = PATTERN (trial);
/* Stand-alone USE and CLOBBER are just for flow. */
if (GET_CODE (pat) == USE || GET_CODE (pat) == CLOBBER)
continue;
/* If this already has filled delay slots, get the insn needing
the delay slots. */
if (GET_CODE (pat) == SEQUENCE)
trial_delay = XVECEXP (pat, 0, 0);
else
trial_delay = trial;
/* If this is a jump insn to our target, indicate that we have
seen another jump to it. If we aren't handling a conditional
jump, stop our search. Otherwise, compute the needs at its
target and add them to NEEDED. */
if (GET_CODE (trial_delay) == JUMP_INSN)
{
if (target == 0)
break;
else if (JUMP_LABEL (trial_delay) != target)
{
rtx ninsn =
next_active_insn (JUMP_LABEL (trial_delay));
mark_target_live_regs (get_insns (), ninsn,
&needed_at_jump);
needed.memory |= needed_at_jump.memory;
needed.unch_memory |= needed_at_jump.unch_memory;
IOR_HARD_REG_SET (needed.regs, needed_at_jump.regs);
}
}
/* See if we have a resource problem before we try to
split. */
if (target == 0
&& GET_CODE (pat) != SEQUENCE
&& ! insn_references_resource_p (trial, &set, 1)
&& ! insn_sets_resource_p (trial, &set, 1)
&& ! insn_sets_resource_p (trial, &needed, 1)
#ifdef HAVE_cc0
&& ! (reg_mentioned_p (cc0_rtx, pat) && ! sets_cc0_p (pat))
#endif
&& ! (maybe_never && may_trap_p (pat))
&& (trial = try_split (pat, trial, 0))
&& eligible_for_delay (insn, slots_filled, trial, flags))
{
next_trial = next_nonnote_insn (trial);
delay_list = add_to_delay_list (trial, delay_list);
#ifdef HAVE_cc0
if (reg_mentioned_p (cc0_rtx, pat))
link_cc0_insns (trial);
#endif
delete_insn (trial);
if (slots_to_fill == ++slots_filled)
break;
continue;
}
mark_set_resources (trial, &set, 0, 1);
mark_referenced_resources (trial, &needed, 1);
/* Ensure we don't put insns between the setting of cc and the
comparison by moving a setting of cc into an earlier delay
slot since these insns could clobber the condition code. */
set.cc = 1;
/* If this is a call or jump, we might not get here. */
if (GET_CODE (trial_delay) == CALL_INSN
|| GET_CODE (trial_delay) == JUMP_INSN)
maybe_never = 1;
}
/* If there are slots left to fill and our search was stopped by an
unconditional branch, try the insn at the branch target. We can
redirect the branch if it works.
Don't do this if the insn at the branch target is a branch. */
if (slots_to_fill != slots_filled
&& trial
&& GET_CODE (trial) == JUMP_INSN
&& simplejump_p (trial)
&& (target == 0 || JUMP_LABEL (trial) == target)
&& (next_trial = next_active_insn (JUMP_LABEL (trial))) != 0
&& ! (GET_CODE (next_trial) == INSN
&& GET_CODE (PATTERN (next_trial)) == SEQUENCE)
&& GET_CODE (next_trial) != JUMP_INSN
&& ! insn_references_resource_p (next_trial, &set, 1)
&& ! insn_sets_resource_p (next_trial, &set, 1)
&& ! insn_sets_resource_p (next_trial, &needed, 1)
#ifdef HAVE_cc0
&& ! reg_mentioned_p (cc0_rtx, PATTERN (next_trial))
#endif
&& ! (maybe_never && may_trap_p (PATTERN (next_trial)))
&& (next_trial = try_split (PATTERN (next_trial), next_trial, 0))
&& eligible_for_delay (insn, slots_filled, next_trial, flags))
{
rtx new_label = next_active_insn (next_trial);
if (new_label != 0)
new_label = get_label_before (new_label);
else
new_label = find_end_label ();
delay_list
= add_to_delay_list (copy_rtx (next_trial), delay_list);
slots_filled++;
reorg_redirect_jump (trial, new_label);
/* If we merged because we both jumped to the same place,
redirect the original insn also. */
if (target)
reorg_redirect_jump (insn, new_label);
}
}
/* If this is an unconditional jump, then try to get insns from the
target of the jump. */
if (GET_CODE (insn) == JUMP_INSN
&& simplejump_p (insn)
&& slots_filled != slots_to_fill)
delay_list
= fill_slots_from_thread (insn, const_true_rtx,
next_active_insn (JUMP_LABEL (insn)),
NULL, 1, 1,
own_thread_p (JUMP_LABEL (insn),
JUMP_LABEL (insn), 0),
slots_to_fill, &slots_filled,
delay_list);
if (delay_list)
unfilled_slots_base[i]
= emit_delay_sequence (insn, delay_list, slots_filled);
if (slots_to_fill == slots_filled)
unfilled_slots_base[i] = 0;
note_delay_statistics (slots_filled, 0);
}
#ifdef DELAY_SLOTS_FOR_EPILOGUE
/* See if the epilogue needs any delay slots. Try to fill them if so.
The only thing we can do is scan backwards from the end of the
function. If we did this in a previous pass, it is incorrect to do it
again. */
if (current_function_epilogue_delay_list)
return;
slots_to_fill = DELAY_SLOTS_FOR_EPILOGUE;
if (slots_to_fill == 0)
return;
slots_filled = 0;
CLEAR_RESOURCE (&set);
/* The frame pointer and stack pointer are needed at the beginning of
the epilogue, so instructions setting them can not be put in the
epilogue delay slot. However, everything else needed at function
end is safe, so we don't want to use end_of_function_needs here. */
CLEAR_RESOURCE (&needed);
if (frame_pointer_needed)
{
SET_HARD_REG_BIT (needed.regs, FRAME_POINTER_REGNUM);
#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
SET_HARD_REG_BIT (needed.regs, HARD_FRAME_POINTER_REGNUM);
#endif
#ifdef EXIT_IGNORE_STACK
if (! EXIT_IGNORE_STACK
|| current_function_sp_is_unchanging)
#endif
SET_HARD_REG_BIT (needed.regs, STACK_POINTER_REGNUM);
}
else
SET_HARD_REG_BIT (needed.regs, STACK_POINTER_REGNUM);
#ifdef EPILOGUE_USES
for (i = 0; i <FIRST_PSEUDO_REGISTER; i++)
{
if (EPILOGUE_USES (i))
SET_HARD_REG_BIT (needed.regs, i);
}
#endif
for (trial = get_last_insn (); ! stop_search_p (trial, 1);
trial = PREV_INSN (trial))
{
if (GET_CODE (trial) == NOTE)
continue;
pat = PATTERN (trial);
if (GET_CODE (pat) == USE || GET_CODE (pat) == CLOBBER)
continue;
if (! insn_references_resource_p (trial, &set, 1)
&& ! insn_sets_resource_p (trial, &needed, 1)
&& ! insn_sets_resource_p (trial, &set, 1)
#ifdef HAVE_cc0
/* Don't want to mess with cc0 here. */
&& ! reg_mentioned_p (cc0_rtx, pat)
#endif
)
{
trial = try_split (pat, trial, 1);
if (ELIGIBLE_FOR_EPILOGUE_DELAY (trial, slots_filled))
{
/* Here as well we are searching backward, so put the
insns we find on the head of the list. */
current_function_epilogue_delay_list
= gen_rtx_INSN_LIST (VOIDmode, trial,
current_function_epilogue_delay_list);
mark_end_of_function_resources (trial, 1);
update_block (trial, trial);
delete_insn (trial);
/* Clear deleted bit so final.c will output the insn. */
INSN_DELETED_P (trial) = 0;
if (slots_to_fill == ++slots_filled)
break;
continue;
}
}
mark_set_resources (trial, &set, 0, 1);
mark_referenced_resources (trial, &needed, 1);
}
note_delay_statistics (slots_filled, 0);
#endif
}
/* Try to find insns to place in delay slots.
INSN is the jump needing SLOTS_TO_FILL delay slots. It tests CONDITION
or is an unconditional branch if CONDITION is const_true_rtx.
*PSLOTS_FILLED is updated with the number of slots that we have filled.
THREAD is a flow-of-control, either the insns to be executed if the
branch is true or if the branch is false, THREAD_IF_TRUE says which.
OPPOSITE_THREAD is the thread in the opposite direction. It is used
to see if any potential delay slot insns set things needed there.
LIKELY is non-zero if it is extremely likely that the branch will be
taken and THREAD_IF_TRUE is set. This is used for the branch at the
end of a loop back up to the top.
OWN_THREAD and OWN_OPPOSITE_THREAD are true if we are the only user of the
thread. I.e., it is the fallthrough code of our jump or the target of the
jump when we are the only jump going there.
If OWN_THREAD is false, it must be the "true" thread of a jump. In that
case, we can only take insns from the head of the thread for our delay
slot. We then adjust the jump to point after the insns we have taken. */
static rtx
fill_slots_from_thread (insn, condition, thread, opposite_thread, likely,
thread_if_true, own_thread,
slots_to_fill, pslots_filled, delay_list)
rtx insn;
rtx condition;
rtx thread, opposite_thread;
int likely;
int thread_if_true;
int own_thread;
int slots_to_fill, *pslots_filled;
rtx delay_list;
{
rtx new_thread;
struct resources opposite_needed, set, needed;
rtx trial;
int lose = 0;
int must_annul = 0;
int flags;
/* Validate our arguments. */
if ((condition == const_true_rtx && ! thread_if_true)
|| (! own_thread && ! thread_if_true))
abort ();
flags = get_jump_flags (insn, JUMP_LABEL (insn));
/* If our thread is the end of subroutine, we can't get any delay
insns from that. */
if (thread == 0)
return delay_list;
/* If this is an unconditional branch, nothing is needed at the
opposite thread. Otherwise, compute what is needed there. */
if (condition == const_true_rtx)
CLEAR_RESOURCE (&opposite_needed);
else
mark_target_live_regs (get_insns (), opposite_thread, &opposite_needed);
/* If the insn at THREAD can be split, do it here to avoid having to
update THREAD and NEW_THREAD if it is done in the loop below. Also
initialize NEW_THREAD. */
new_thread = thread = try_split (PATTERN (thread), thread, 0);
/* Scan insns at THREAD. We are looking for an insn that can be removed
from THREAD (it neither sets nor references resources that were set
ahead of it and it doesn't set anything needs by the insns ahead of
it) and that either can be placed in an annulling insn or aren't
needed at OPPOSITE_THREAD. */
CLEAR_RESOURCE (&needed);
CLEAR_RESOURCE (&set);
/* If we do not own this thread, we must stop as soon as we find
something that we can't put in a delay slot, since all we can do
is branch into THREAD at a later point. Therefore, labels stop
the search if this is not the `true' thread. */
for (trial = thread;
! stop_search_p (trial, ! thread_if_true) && (! lose || own_thread);
trial = next_nonnote_insn (trial))
{
rtx pat, old_trial;
/* If we have passed a label, we no longer own this thread. */
if (GET_CODE (trial) == CODE_LABEL)
{
own_thread = 0;
continue;
}
pat = PATTERN (trial);
if (GET_CODE (pat) == USE || GET_CODE (pat) == CLOBBER)
continue;
/* If TRIAL conflicts with the insns ahead of it, we lose. Also,
don't separate or copy insns that set and use CC0. */
if (! insn_references_resource_p (trial, &set, 1)
&& ! insn_sets_resource_p (trial, &set, 1)
&& ! insn_sets_resource_p (trial, &needed, 1)
#ifdef HAVE_cc0
&& ! (reg_mentioned_p (cc0_rtx, pat)
&& (! own_thread || ! sets_cc0_p (pat)))
#endif
)
{
rtx prior_insn;
/* If TRIAL is redundant with some insn before INSN, we don't
actually need to add it to the delay list; we can merely pretend
we did. */
if ((prior_insn = redundant_insn (trial, insn, delay_list)))
{
fix_reg_dead_note (prior_insn, insn);
if (own_thread)
{
update_block (trial, thread);
if (trial == thread)
{
thread = next_active_insn (thread);
if (new_thread == trial)
new_thread = thread;
}
delete_insn (trial);
}
else
{
update_reg_unused_notes (prior_insn, trial);
new_thread = next_active_insn (trial);
}
continue;
}
/* There are two ways we can win: If TRIAL doesn't set anything
needed at the opposite thread and can't trap, or if it can
go into an annulled delay slot. */
if (!must_annul
&& (condition == const_true_rtx
|| (! insn_sets_resource_p (trial, &opposite_needed, 1)
&& ! may_trap_p (pat))))
{
old_trial = trial;
trial = try_split (pat, trial, 0);
if (new_thread == old_trial)
new_thread = trial;
if (thread == old_trial)
thread = trial;
pat = PATTERN (trial);
if (eligible_for_delay (insn, *pslots_filled, trial, flags))
goto winner;
}
else if (0
#ifdef ANNUL_IFTRUE_SLOTS
|| ! thread_if_true
#endif
#ifdef ANNUL_IFFALSE_SLOTS
|| thread_if_true
#endif
)
{
old_trial = trial;
trial = try_split (pat, trial, 0);
if (new_thread == old_trial)
new_thread = trial;
if (thread == old_trial)
thread = trial;
pat = PATTERN (trial);
if ((must_annul || delay_list == NULL) && (thread_if_true
? check_annul_list_true_false (0, delay_list)
&& eligible_for_annul_false (insn, *pslots_filled, trial, flags)
: check_annul_list_true_false (1, delay_list)
&& eligible_for_annul_true (insn, *pslots_filled, trial, flags)))
{
rtx temp;
must_annul = 1;
winner:
#ifdef HAVE_cc0
if (reg_mentioned_p (cc0_rtx, pat))
link_cc0_insns (trial);
#endif
/* If we own this thread, delete the insn. If this is the
destination of a branch, show that a basic block status
may have been updated. In any case, mark the new
starting point of this thread. */
if (own_thread)
{
update_block (trial, thread);
if (trial == thread)
{
thread = next_active_insn (thread);
if (new_thread == trial)
new_thread = thread;
}
delete_insn (trial);
}
else
new_thread = next_active_insn (trial);
temp = own_thread ? trial : copy_rtx (trial);
if (thread_if_true)
INSN_FROM_TARGET_P (temp) = 1;
delay_list = add_to_delay_list (temp, delay_list);
if (slots_to_fill == ++(*pslots_filled))
{
/* Even though we have filled all the slots, we
may be branching to a location that has a
redundant insn. Skip any if so. */
while (new_thread && ! own_thread
&& ! insn_sets_resource_p (new_thread, &set, 1)
&& ! insn_sets_resource_p (new_thread, &needed, 1)
&& ! insn_references_resource_p (new_thread,
&set, 1)
&& (prior_insn
= redundant_insn (new_thread, insn,
delay_list)))
{
/* We know we do not own the thread, so no need
to call update_block and delete_insn. */
fix_reg_dead_note (prior_insn, insn);
update_reg_unused_notes (prior_insn, new_thread);
new_thread = next_active_insn (new_thread);
}
break;
}
continue;
}
}
}
/* This insn can't go into a delay slot. */
lose = 1;
mark_set_resources (trial, &set, 0, 1);
mark_referenced_resources (trial, &needed, 1);
/* Ensure we don't put insns between the setting of cc and the comparison
by moving a setting of cc into an earlier delay slot since these insns
could clobber the condition code. */
set.cc = 1;
/* If this insn is a register-register copy and the next insn has
a use of our destination, change it to use our source. That way,
it will become a candidate for our delay slot the next time
through this loop. This case occurs commonly in loops that
scan a list.
We could check for more complex cases than those tested below,
but it doesn't seem worth it. It might also be a good idea to try
to swap the two insns. That might do better.
We can't do this if the next insn modifies our destination, because
that would make the replacement into the insn invalid. We also can't
do this if it modifies our source, because it might be an earlyclobber
operand. This latter test also prevents updating the contents of
a PRE_INC. */
if (GET_CODE (trial) == INSN && GET_CODE (pat) == SET
&& GET_CODE (SET_SRC (pat)) == REG
&& GET_CODE (SET_DEST (pat)) == REG)
{
rtx next = next_nonnote_insn (trial);
if (next && GET_CODE (next) == INSN
&& GET_CODE (PATTERN (next)) != USE
&& ! reg_set_p (SET_DEST (pat), next)
&& ! reg_set_p (SET_SRC (pat), next)
&& reg_referenced_p (SET_DEST (pat), PATTERN (next)))
validate_replace_rtx (SET_DEST (pat), SET_SRC (pat), next);
}
}
/* If we stopped on a branch insn that has delay slots, see if we can
steal some of the insns in those slots. */
if (trial && GET_CODE (trial) == INSN
&& GET_CODE (PATTERN (trial)) == SEQUENCE
&& GET_CODE (XVECEXP (PATTERN (trial), 0, 0)) == JUMP_INSN)
{
/* If this is the `true' thread, we will want to follow the jump,
so we can only do this if we have taken everything up to here. */
if (thread_if_true && trial == new_thread)
delay_list
= steal_delay_list_from_target (insn, condition, PATTERN (trial),
delay_list, &set, &needed,
&opposite_needed, slots_to_fill,
pslots_filled, &must_annul,
&new_thread);
else if (! thread_if_true)
delay_list
= steal_delay_list_from_fallthrough (insn, condition,
PATTERN (trial),
delay_list, &set, &needed,
&opposite_needed, slots_to_fill,
pslots_filled, &must_annul);
}
/* If we haven't found anything for this delay slot and it is very
likely that the branch will be taken, see if the insn at our target
increments or decrements a register with an increment that does not
depend on the destination register. If so, try to place the opposite
arithmetic insn after the jump insn and put the arithmetic insn in the
delay slot. If we can't do this, return. */
if (delay_list == 0 && likely && new_thread
&& GET_CODE (new_thread) == INSN
&& GET_CODE (PATTERN (new_thread)) != ASM_INPUT
&& asm_noperands (PATTERN (new_thread)) < 0)
{
rtx pat = PATTERN (new_thread);
rtx dest;
rtx src;
trial = new_thread;
pat = PATTERN (trial);
if (GET_CODE (trial) != INSN || GET_CODE (pat) != SET
|| ! eligible_for_delay (insn, 0, trial, flags))
return 0;
dest = SET_DEST (pat), src = SET_SRC (pat);
if ((GET_CODE (src) == PLUS || GET_CODE (src) == MINUS)
&& rtx_equal_p (XEXP (src, 0), dest)
&& ! reg_overlap_mentioned_p (dest, XEXP (src, 1)))
{
rtx other = XEXP (src, 1);
rtx new_arith;
rtx ninsn;
/* If this is a constant adjustment, use the same code with
the negated constant. Otherwise, reverse the sense of the
arithmetic. */
if (GET_CODE (other) == CONST_INT)
new_arith = gen_rtx_fmt_ee (GET_CODE (src), GET_MODE (src), dest,
negate_rtx (GET_MODE (src), other));
else
new_arith = gen_rtx_fmt_ee (GET_CODE (src) == PLUS ? MINUS : PLUS,
GET_MODE (src), dest, other);
ninsn = emit_insn_after (gen_rtx_SET (VOIDmode, dest, new_arith),
insn);
if (recog_memoized (ninsn) < 0
|| (extract_insn (ninsn), ! constrain_operands (1)))
{
delete_insn (ninsn);
return 0;
}
if (own_thread)
{
update_block (trial, thread);
if (trial == thread)
{
thread = next_active_insn (thread);
if (new_thread == trial)
new_thread = thread;
}
delete_insn (trial);
}
else
new_thread = next_active_insn (trial);
ninsn = own_thread ? trial : copy_rtx (trial);
if (thread_if_true)
INSN_FROM_TARGET_P (ninsn) = 1;
delay_list = add_to_delay_list (ninsn, NULL_RTX);
(*pslots_filled)++;
}
}
if (delay_list && must_annul)
INSN_ANNULLED_BRANCH_P (insn) = 1;
/* If we are to branch into the middle of this thread, find an appropriate
label or make a new one if none, and redirect INSN to it. If we hit the
end of the function, use the end-of-function label. */
if (new_thread != thread)
{
rtx label;
if (! thread_if_true)
abort ();
if (new_thread && GET_CODE (new_thread) == JUMP_INSN
&& (simplejump_p (new_thread)
|| GET_CODE (PATTERN (new_thread)) == RETURN)
&& redirect_with_delay_list_safe_p (insn,
JUMP_LABEL (new_thread),
delay_list))
new_thread = follow_jumps (JUMP_LABEL (new_thread));
if (new_thread == 0)
label = find_end_label ();
else if (GET_CODE (new_thread) == CODE_LABEL)
label = new_thread;
else
label = get_label_before (new_thread);
reorg_redirect_jump (insn, label);
}
return delay_list;
}
/* Make another attempt to find insns to place in delay slots.
We previously looked for insns located in front of the delay insn
and, for non-jump delay insns, located behind the delay insn.
Here only try to schedule jump insns and try to move insns from either
the target or the following insns into the delay slot. If annulling is
supported, we will be likely to do this. Otherwise, we can do this only
if safe. */
static void
fill_eager_delay_slots ()
{
register rtx insn;
register int i;
int num_unfilled_slots = unfilled_slots_next - unfilled_slots_base;
for (i = 0; i < num_unfilled_slots; i++)
{
rtx condition;
rtx target_label, insn_at_target, fallthrough_insn;
rtx delay_list = 0;
int own_target;
int own_fallthrough;
int prediction, slots_to_fill, slots_filled;
insn = unfilled_slots_base[i];
if (insn == 0
|| INSN_DELETED_P (insn)
|| GET_CODE (insn) != JUMP_INSN
|| ! (condjump_p (insn) || condjump_in_parallel_p (insn)))
continue;
slots_to_fill = num_delay_slots (insn);
/* Some machine description have defined instructions to have
delay slots only in certain circumstances which may depend on
nearby insns (which change due to reorg's actions).
For example, the PA port normally has delay slots for unconditional
jumps.
However, the PA port claims such jumps do not have a delay slot
if they are immediate successors of certain CALL_INSNs. This
allows the port to favor filling the delay slot of the call with
the unconditional jump. */
if (slots_to_fill == 0)
continue;
slots_filled = 0;
target_label = JUMP_LABEL (insn);
condition = get_branch_condition (insn, target_label);
if (condition == 0)
continue;
/* Get the next active fallthrough and target insns and see if we own
them. Then see whether the branch is likely true. We don't need
to do a lot of this for unconditional branches. */
insn_at_target = next_active_insn (target_label);
own_target = own_thread_p (target_label, target_label, 0);
if (condition == const_true_rtx)
{
own_fallthrough = 0;
fallthrough_insn = 0;
prediction = 2;
}
else
{
fallthrough_insn = next_active_insn (insn);
own_fallthrough = own_thread_p (NEXT_INSN (insn), NULL_RTX, 1);
prediction = mostly_true_jump (insn, condition);
}
/* If this insn is expected to branch, first try to get insns from our
target, then our fallthrough insns. If it is not, expected to branch,
try the other order. */
if (prediction > 0)
{
delay_list
= fill_slots_from_thread (insn, condition, insn_at_target,
fallthrough_insn, prediction == 2, 1,
own_target,
slots_to_fill, &slots_filled, delay_list);
if (delay_list == 0 && own_fallthrough)
{
/* Even though we didn't find anything for delay slots,
we might have found a redundant insn which we deleted
from the thread that was filled. So we have to recompute
the next insn at the target. */
target_label = JUMP_LABEL (insn);
insn_at_target = next_active_insn (target_label);
delay_list
= fill_slots_from_thread (insn, condition, fallthrough_insn,
insn_at_target, 0, 0,
own_fallthrough,
slots_to_fill, &slots_filled,
delay_list);
}
}
else
{
if (own_fallthrough)
delay_list
= fill_slots_from_thread (insn, condition, fallthrough_insn,
insn_at_target, 0, 0,
own_fallthrough,
slots_to_fill, &slots_filled,
delay_list);
if (delay_list == 0)
delay_list
= fill_slots_from_thread (insn, condition, insn_at_target,
next_active_insn (insn), 0, 1,
own_target,
slots_to_fill, &slots_filled,
delay_list);
}
if (delay_list)
unfilled_slots_base[i]
= emit_delay_sequence (insn, delay_list, slots_filled);
if (slots_to_fill == slots_filled)
unfilled_slots_base[i] = 0;
note_delay_statistics (slots_filled, 1);
}
}
/* Once we have tried two ways to fill a delay slot, make a pass over the
code to try to improve the results and to do such things as more jump
threading. */
static void
relax_delay_slots (first)
rtx first;
{
register rtx insn, next, pat;
register rtx trial, delay_insn, target_label;
/* Look at every JUMP_INSN and see if we can improve it. */
for (insn = first; insn; insn = next)
{
rtx other;
next = next_active_insn (insn);
/* If this is a jump insn, see if it now jumps to a jump, jumps to
the next insn, or jumps to a label that is not the last of a
group of consecutive labels. */
if (GET_CODE (insn) == JUMP_INSN
&& (condjump_p (insn) || condjump_in_parallel_p (insn))
&& (target_label = JUMP_LABEL (insn)) != 0)
{
target_label = follow_jumps (target_label);
target_label = prev_label (next_active_insn (target_label));
if (target_label == 0)
target_label = find_end_label ();
if (next_active_insn (target_label) == next
&& ! condjump_in_parallel_p (insn))
{
delete_jump (insn);
continue;
}
if (target_label != JUMP_LABEL (insn))
reorg_redirect_jump (insn, target_label);
/* See if this jump branches around a unconditional jump.
If so, invert this jump and point it to the target of the
second jump. */
if (next && GET_CODE (next) == JUMP_INSN
&& (simplejump_p (next) || GET_CODE (PATTERN (next)) == RETURN)
&& next_active_insn (target_label) == next_active_insn (next)
&& no_labels_between_p (insn, next))
{
rtx label = JUMP_LABEL (next);
/* Be careful how we do this to avoid deleting code or
labels that are momentarily dead. See similar optimization
in jump.c.
We also need to ensure we properly handle the case when
invert_jump fails. */
++LABEL_NUSES (target_label);
if (label)
++LABEL_NUSES (label);
if (invert_jump (insn, label))
{
delete_insn (next);
next = insn;
}
if (label)
--LABEL_NUSES (label);
if (--LABEL_NUSES (target_label) == 0)
delete_insn (target_label);
continue;
}
}
/* If this is an unconditional jump and the previous insn is a
conditional jump, try reversing the condition of the previous
insn and swapping our targets. The next pass might be able to
fill the slots.
Don't do this if we expect the conditional branch to be true, because
we would then be making the more common case longer. */
if (GET_CODE (insn) == JUMP_INSN
&& (simplejump_p (insn) || GET_CODE (PATTERN (insn)) == RETURN)
&& (other = prev_active_insn (insn)) != 0
&& (condjump_p (other) || condjump_in_parallel_p (other))
&& no_labels_between_p (other, insn)
&& 0 > mostly_true_jump (other,
get_branch_condition (other,
JUMP_LABEL (other))))
{
rtx other_target = JUMP_LABEL (other);
target_label = JUMP_LABEL (insn);
/* Increment the count of OTHER_TARGET, so it doesn't get deleted
as we move the label. */
if (other_target)
++LABEL_NUSES (other_target);
if (invert_jump (other, target_label))
reorg_redirect_jump (insn, other_target);
if (other_target)
--LABEL_NUSES (other_target);
}
/* Now look only at cases where we have filled a delay slot. */
if (GET_CODE (insn) != INSN
|| GET_CODE (PATTERN (insn)) != SEQUENCE)
continue;
pat = PATTERN (insn);
delay_insn = XVECEXP (pat, 0, 0);
/* See if the first insn in the delay slot is redundant with some
previous insn. Remove it from the delay slot if so; then set up
to reprocess this insn. */
if (redundant_insn (XVECEXP (pat, 0, 1), delay_insn, 0))
{
delete_from_delay_slot (XVECEXP (pat, 0, 1));
next = prev_active_insn (next);
continue;
}
/* See if we have a RETURN insn with a filled delay slot followed
by a RETURN insn with an unfilled a delay slot. If so, we can delete
the first RETURN (but not it's delay insn). This gives the same
effect in fewer instructions.
Only do so if optimizing for size since this results in slower, but
smaller code. */
if (optimize_size
&& GET_CODE (PATTERN (delay_insn)) == RETURN
&& next
&& GET_CODE (next) == JUMP_INSN
&& GET_CODE (PATTERN (next)) == RETURN)
{
int i;
/* Delete the RETURN and just execute the delay list insns.
We do this by deleting the INSN containing the SEQUENCE, then
re-emitting the insns separately, and then deleting the RETURN.
This allows the count of the jump target to be properly
decremented. */
/* Clear the from target bit, since these insns are no longer
in delay slots. */
for (i = 0; i < XVECLEN (pat, 0); i++)
INSN_FROM_TARGET_P (XVECEXP (pat, 0, i)) = 0;
trial = PREV_INSN (insn);
delete_insn (insn);
emit_insn_after (pat, trial);
delete_scheduled_jump (delay_insn);
continue;
}
/* Now look only at the cases where we have a filled JUMP_INSN. */
if (GET_CODE (XVECEXP (PATTERN (insn), 0, 0)) != JUMP_INSN
|| ! (condjump_p (XVECEXP (PATTERN (insn), 0, 0))
|| condjump_in_parallel_p (XVECEXP (PATTERN (insn), 0, 0))))
continue;
target_label = JUMP_LABEL (delay_insn);
if (target_label)
{
/* If this jump goes to another unconditional jump, thread it, but
don't convert a jump into a RETURN here. */
trial = follow_jumps (target_label);
/* We use next_real_insn instead of next_active_insn, so that
the special USE insns emitted by reorg won't be ignored.
If they are ignored, then they will get deleted if target_label
is now unreachable, and that would cause mark_target_live_regs
to fail. */
trial = prev_label (next_real_insn (trial));
if (trial == 0 && target_label != 0)
trial = find_end_label ();
if (trial != target_label
&& redirect_with_delay_slots_safe_p (delay_insn, trial, insn))
{
reorg_redirect_jump (delay_insn, trial);
target_label = trial;
}
/* If the first insn at TARGET_LABEL is redundant with a previous
insn, redirect the jump to the following insn process again. */
trial = next_active_insn (target_label);
if (trial && GET_CODE (PATTERN (trial)) != SEQUENCE
&& redundant_insn (trial, insn, 0))
{
rtx tmp;
/* Figure out where to emit the special USE insn so we don't
later incorrectly compute register live/death info. */
tmp = next_active_insn (trial);
if (tmp == 0)
tmp = find_end_label ();
/* Insert the special USE insn and update dataflow info. */
update_block (trial, tmp);
/* Now emit a label before the special USE insn, and
redirect our jump to the new label. */
target_label = get_label_before (PREV_INSN (tmp));
reorg_redirect_jump (delay_insn, target_label);
next = insn;
continue;
}
/* Similarly, if it is an unconditional jump with one insn in its
delay list and that insn is redundant, thread the jump. */
if (trial && GET_CODE (PATTERN (trial)) == SEQUENCE
&& XVECLEN (PATTERN (trial), 0) == 2
&& GET_CODE (XVECEXP (PATTERN (trial), 0, 0)) == JUMP_INSN
&& (simplejump_p (XVECEXP (PATTERN (trial), 0, 0))
|| GET_CODE (PATTERN (XVECEXP (PATTERN (trial), 0, 0))) == RETURN)
&& redundant_insn (XVECEXP (PATTERN (trial), 0, 1), insn, 0))
{
target_label = JUMP_LABEL (XVECEXP (PATTERN (trial), 0, 0));
if (target_label == 0)
target_label = find_end_label ();
if (redirect_with_delay_slots_safe_p (delay_insn, target_label,
insn))
{
reorg_redirect_jump (delay_insn, target_label);
next = insn;
continue;
}
}
}
if (! INSN_ANNULLED_BRANCH_P (delay_insn)
&& prev_active_insn (target_label) == insn
&& ! condjump_in_parallel_p (delay_insn)
#ifdef HAVE_cc0
/* If the last insn in the delay slot sets CC0 for some insn,
various code assumes that it is in a delay slot. We could
put it back where it belonged and delete the register notes,
but it doesn't seem worthwhile in this uncommon case. */
&& ! find_reg_note (XVECEXP (pat, 0, XVECLEN (pat, 0) - 1),
REG_CC_USER, NULL_RTX)
#endif
)
{
int i;
/* All this insn does is execute its delay list and jump to the
following insn. So delete the jump and just execute the delay
list insns.
We do this by deleting the INSN containing the SEQUENCE, then
re-emitting the insns separately, and then deleting the jump.
This allows the count of the jump target to be properly
decremented. */
/* Clear the from target bit, since these insns are no longer
in delay slots. */
for (i = 0; i < XVECLEN (pat, 0); i++)
INSN_FROM_TARGET_P (XVECEXP (pat, 0, i)) = 0;
trial = PREV_INSN (insn);
delete_insn (insn);
emit_insn_after (pat, trial);
delete_scheduled_jump (delay_insn);
continue;
}
/* See if this is an unconditional jump around a single insn which is
identical to the one in its delay slot. In this case, we can just
delete the branch and the insn in its delay slot. */
if (next && GET_CODE (next) == INSN
&& prev_label (next_active_insn (next)) == target_label
&& simplejump_p (insn)
&& XVECLEN (pat, 0) == 2
&& rtx_equal_p (PATTERN (next), PATTERN (XVECEXP (pat, 0, 1))))
{
delete_insn (insn);
continue;
}
/* See if this jump (with its delay slots) branches around another
jump (without delay slots). If so, invert this jump and point
it to the target of the second jump. We cannot do this for
annulled jumps, though. Again, don't convert a jump to a RETURN
here. */
if (! INSN_ANNULLED_BRANCH_P (delay_insn)
&& next && GET_CODE (next) == JUMP_INSN
&& (simplejump_p (next) || GET_CODE (PATTERN (next)) == RETURN)
&& next_active_insn (target_label) == next_active_insn (next)
&& no_labels_between_p (insn, next))
{
rtx label = JUMP_LABEL (next);
rtx old_label = JUMP_LABEL (delay_insn);
if (label == 0)
label = find_end_label ();
if (redirect_with_delay_slots_safe_p (delay_insn, label, insn))
{
/* Be careful how we do this to avoid deleting code or labels
that are momentarily dead. See similar optimization in
jump.c */
if (old_label)
++LABEL_NUSES (old_label);
if (invert_jump (delay_insn, label))
{
int i;
/* Must update the INSN_FROM_TARGET_P bits now that
the branch is reversed, so that mark_target_live_regs
will handle the delay slot insn correctly. */
for (i = 1; i < XVECLEN (PATTERN (insn), 0); i++)
{
rtx slot = XVECEXP (PATTERN (insn), 0, i);
INSN_FROM_TARGET_P (slot) = ! INSN_FROM_TARGET_P (slot);
}
delete_insn (next);
next = insn;
}
if (old_label && --LABEL_NUSES (old_label) == 0)
delete_insn (old_label);
continue;
}
}
/* If we own the thread opposite the way this insn branches, see if we
can merge its delay slots with following insns. */
if (INSN_FROM_TARGET_P (XVECEXP (pat, 0, 1))
&& own_thread_p (NEXT_INSN (insn), 0, 1))
try_merge_delay_insns (insn, next);
else if (! INSN_FROM_TARGET_P (XVECEXP (pat, 0, 1))
&& own_thread_p (target_label, target_label, 0))
try_merge_delay_insns (insn, next_active_insn (target_label));
/* If we get here, we haven't deleted INSN. But we may have deleted
NEXT, so recompute it. */
next = next_active_insn (insn);
}
}
#ifdef HAVE_return
/* Look for filled jumps to the end of function label. We can try to convert
them into RETURN insns if the insns in the delay slot are valid for the
RETURN as well. */
static void
make_return_insns (first)
rtx first;
{
rtx insn, jump_insn, pat;
rtx real_return_label = end_of_function_label;
int slots, i;
/* See if there is a RETURN insn in the function other than the one we
made for END_OF_FUNCTION_LABEL. If so, set up anything we can't change
into a RETURN to jump to it. */
for (insn = first; insn; insn = NEXT_INSN (insn))
if (GET_CODE (insn) == JUMP_INSN && GET_CODE (PATTERN (insn)) == RETURN)
{
real_return_label = get_label_before (insn);
break;
}
/* Show an extra usage of REAL_RETURN_LABEL so it won't go away if it
was equal to END_OF_FUNCTION_LABEL. */
LABEL_NUSES (real_return_label)++;
/* Clear the list of insns to fill so we can use it. */
obstack_free (&unfilled_slots_obstack, unfilled_firstobj);
for (insn = first; insn; insn = NEXT_INSN (insn))
{
int flags;
/* Only look at filled JUMP_INSNs that go to the end of function
label. */
if (GET_CODE (insn) != INSN
|| GET_CODE (PATTERN (insn)) != SEQUENCE
|| GET_CODE (XVECEXP (PATTERN (insn), 0, 0)) != JUMP_INSN
|| JUMP_LABEL (XVECEXP (PATTERN (insn), 0, 0)) != end_of_function_label)
continue;
pat = PATTERN (insn);
jump_insn = XVECEXP (pat, 0, 0);
/* If we can't make the jump into a RETURN, try to redirect it to the best
RETURN and go on to the next insn. */
if (! reorg_redirect_jump (jump_insn, NULL_RTX))
{
/* Make sure redirecting the jump will not invalidate the delay
slot insns. */
if (redirect_with_delay_slots_safe_p (jump_insn,
real_return_label,
insn))
reorg_redirect_jump (jump_insn, real_return_label);
continue;
}
/* See if this RETURN can accept the insns current in its delay slot.
It can if it has more or an equal number of slots and the contents
of each is valid. */
flags = get_jump_flags (jump_insn, JUMP_LABEL (jump_insn));
slots = num_delay_slots (jump_insn);
if (slots >= XVECLEN (pat, 0) - 1)
{
for (i = 1; i < XVECLEN (pat, 0); i++)
if (! (
#ifdef ANNUL_IFFALSE_SLOTS
(INSN_ANNULLED_BRANCH_P (jump_insn)
&& INSN_FROM_TARGET_P (XVECEXP (pat, 0, i)))
? eligible_for_annul_false (jump_insn, i - 1,
XVECEXP (pat, 0, i), flags) :
#endif
#ifdef ANNUL_IFTRUE_SLOTS
(INSN_ANNULLED_BRANCH_P (jump_insn)
&& ! INSN_FROM_TARGET_P (XVECEXP (pat, 0, i)))
? eligible_for_annul_true (jump_insn, i - 1,
XVECEXP (pat, 0, i), flags) :
#endif
eligible_for_delay (jump_insn, i -1, XVECEXP (pat, 0, i), flags)))
break;
}
else
i = 0;
if (i == XVECLEN (pat, 0))
continue;
/* We have to do something with this insn. If it is an unconditional
RETURN, delete the SEQUENCE and output the individual insns,
followed by the RETURN. Then set things up so we try to find
insns for its delay slots, if it needs some. */
if (GET_CODE (PATTERN (jump_insn)) == RETURN)
{
rtx prev = PREV_INSN (insn);
delete_insn (insn);
for (i = 1; i < XVECLEN (pat, 0); i++)
prev = emit_insn_after (PATTERN (XVECEXP (pat, 0, i)), prev);
insn = emit_jump_insn_after (PATTERN (jump_insn), prev);
emit_barrier_after (insn);
if (slots)
obstack_ptr_grow (&unfilled_slots_obstack, insn);
}
else
/* It is probably more efficient to keep this with its current
delay slot as a branch to a RETURN. */
reorg_redirect_jump (jump_insn, real_return_label);
}
/* Now delete REAL_RETURN_LABEL if we never used it. Then try to fill any
new delay slots we have created. */
if (--LABEL_NUSES (real_return_label) == 0)
delete_insn (real_return_label);
fill_simple_delay_slots (1);
fill_simple_delay_slots (0);
}
#endif
/* Try to find insns to place in delay slots. */
void
dbr_schedule (first, file)
rtx first;
FILE *file;
{
rtx insn, next, epilogue_insn = 0;
int i;
#if 0
int old_flag_no_peephole = flag_no_peephole;
/* Execute `final' once in prescan mode to delete any insns that won't be
used. Don't let final try to do any peephole optimization--it will
ruin dataflow information for this pass. */
flag_no_peephole = 1;
final (first, 0, NO_DEBUG, 1, 1);
flag_no_peephole = old_flag_no_peephole;
#endif
/* If the current function has no insns other than the prologue and
epilogue, then do not try to fill any delay slots. */
if (n_basic_blocks == 0)
return;
/* Find the highest INSN_UID and allocate and initialize our map from
INSN_UID's to position in code. */
for (max_uid = 0, insn = first; insn; insn = NEXT_INSN (insn))
{
if (INSN_UID (insn) > max_uid)
max_uid = INSN_UID (insn);
if (GET_CODE (insn) == NOTE
&& NOTE_LINE_NUMBER (insn) == NOTE_INSN_EPILOGUE_BEG)
epilogue_insn = insn;
}
uid_to_ruid = (int *) alloca ((max_uid + 1) * sizeof (int));
for (i = 0, insn = first; insn; i++, insn = NEXT_INSN (insn))
uid_to_ruid[INSN_UID (insn)] = i;
/* Initialize the list of insns that need filling. */
if (unfilled_firstobj == 0)
{
gcc_obstack_init (&unfilled_slots_obstack);
unfilled_firstobj = (rtx *) obstack_alloc (&unfilled_slots_obstack, 0);
}
for (insn = next_active_insn (first); insn; insn = next_active_insn (insn))
{
rtx target;
INSN_ANNULLED_BRANCH_P (insn) = 0;
INSN_FROM_TARGET_P (insn) = 0;
/* Skip vector tables. We can't get attributes for them. */
if (GET_CODE (insn) == JUMP_INSN
&& (GET_CODE (PATTERN (insn)) == ADDR_VEC
|| GET_CODE (PATTERN (insn)) == ADDR_DIFF_VEC))
continue;
if (num_delay_slots (insn) > 0)
obstack_ptr_grow (&unfilled_slots_obstack, insn);
/* Ensure all jumps go to the last of a set of consecutive labels. */
if (GET_CODE (insn) == JUMP_INSN
&& (condjump_p (insn) || condjump_in_parallel_p (insn))
&& JUMP_LABEL (insn) != 0
&& ((target = prev_label (next_active_insn (JUMP_LABEL (insn))))
!= JUMP_LABEL (insn)))
redirect_jump (insn, target);
}
init_resource_info (epilogue_insn);
/* Show we haven't computed an end-of-function label yet. */
end_of_function_label = 0;
/* Initialize the statistics for this function. */
bzero ((char *) num_insns_needing_delays, sizeof num_insns_needing_delays);
bzero ((char *) num_filled_delays, sizeof num_filled_delays);
/* Now do the delay slot filling. Try everything twice in case earlier
changes make more slots fillable. */
for (reorg_pass_number = 0;
reorg_pass_number < MAX_REORG_PASSES;
reorg_pass_number++)
{
fill_simple_delay_slots (1);
fill_simple_delay_slots (0);
fill_eager_delay_slots ();
relax_delay_slots (first);
}
/* Delete any USE insns made by update_block; subsequent passes don't need
them or know how to deal with them. */
for (insn = first; insn; insn = next)
{
next = NEXT_INSN (insn);
if (GET_CODE (insn) == INSN && GET_CODE (PATTERN (insn)) == USE
&& GET_RTX_CLASS (GET_CODE (XEXP (PATTERN (insn), 0))) == 'i')
next = delete_insn (insn);
}
/* If we made an end of function label, indicate that it is now
safe to delete it by undoing our prior adjustment to LABEL_NUSES.
If it is now unused, delete it. */
if (end_of_function_label && --LABEL_NUSES (end_of_function_label) == 0)
delete_insn (end_of_function_label);
#ifdef HAVE_return
if (HAVE_return && end_of_function_label != 0)
make_return_insns (first);
#endif
obstack_free (&unfilled_slots_obstack, unfilled_firstobj);
/* It is not clear why the line below is needed, but it does seem to be. */
unfilled_firstobj = (rtx *) obstack_alloc (&unfilled_slots_obstack, 0);
/* Reposition the prologue and epilogue notes in case we moved the
prologue/epilogue insns. */
reposition_prologue_and_epilogue_notes (first);
if (file)
{
register int i, j, need_comma;
for (reorg_pass_number = 0;
reorg_pass_number < MAX_REORG_PASSES;
reorg_pass_number++)
{
fprintf (file, ";; Reorg pass #%d:\n", reorg_pass_number + 1);
for (i = 0; i < NUM_REORG_FUNCTIONS; i++)
{
need_comma = 0;
fprintf (file, ";; Reorg function #%d\n", i);
fprintf (file, ";; %d insns needing delay slots\n;; ",
num_insns_needing_delays[i][reorg_pass_number]);
for (j = 0; j < MAX_DELAY_HISTOGRAM; j++)
if (num_filled_delays[i][j][reorg_pass_number])
{
if (need_comma)
fprintf (file, ", ");
need_comma = 1;
fprintf (file, "%d got %d delays",
num_filled_delays[i][j][reorg_pass_number], j);
}
fprintf (file, "\n");
}
}
}
/* For all JUMP insns, fill in branch prediction notes, so that during
assembler output a target can set branch prediction bits in the code.
We have to do this now, as up until this point the destinations of
JUMPS can be moved around and changed, but past right here that cannot
happen. */
for (insn = first; insn; insn = NEXT_INSN (insn))
{
int pred_flags;
if (GET_CODE (insn) == INSN)
{
rtx pat = PATTERN (insn);
if (GET_CODE (pat) == SEQUENCE)
insn = XVECEXP (pat, 0, 0);
}
if (GET_CODE (insn) != JUMP_INSN)
continue;
pred_flags = get_jump_flags (insn, JUMP_LABEL (insn));
REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_BR_PRED,
GEN_INT (pred_flags),
REG_NOTES (insn));
}
free_resource_info ();
}
#endif /* DELAY_SLOTS */