Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/arch/arm/s3c2xx0/sscom_var.h

243 lines
8.5 KiB
C
Raw Blame History

/* $NetBSD: sscom_var.h,v 1.3 2003/06/23 11:01:09 martin Exp $ */
/*
* Copyright (c) 2002 Fujitsu Component Limited
* Copyright (c) 2002 Genetec Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of The Fujitsu Component Limited nor the name of
* Genetec corporation may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY FUJITSU COMPONENT LIMITED AND GENETEC
* CORPORATION ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL FUJITSU COMPONENT LIMITED OR GENETEC
* CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* derived from sys/dev/ic/comvar.h */
/*
* Copyright (c) 1996 Christopher G. Demetriou. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Christopher G. Demetriou
* for the NetBSD Project.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _ARM_S3C2XX0_SSCOM_VAR_H
#define _ARM_S3C2XX0_SSCOM_VAR_H
#include "opt_multiprocessor.h"
#include "opt_lockdebug.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/termios.h>
#include <sys/callout.h>
#include <machine/bus.h>
/* Hardware flag masks */
#define SSCOM_HW_FLOW 0x02
#define SSCOM_HW_DEV_OK 0x04
#define SSCOM_HW_CONSOLE 0x08
#define SSCOM_HW_KGDB 0x10
#define SSCOM_HW_TXINT 0x20
#define SSCOM_HW_RXINT 0x40
/* Buffer size for character buffer */
#define SSCOM_RING_SIZE 2048
struct sscom_softc {
struct device sc_dev;
void *sc_si;
struct tty *sc_tty;
struct callout sc_diag_callout;
int sc_unit; /* UART0/UART1 */
int sc_frequency;
bus_space_tag_t sc_iot;
bus_space_handle_t sc_ioh;
u_int sc_overflows,
sc_floods,
sc_errors;
int sc_hwflags,
sc_swflags;
u_int sc_r_hiwat,
sc_r_lowat;
u_char *volatile sc_rbget,
*volatile sc_rbput;
volatile u_int sc_rbavail;
u_char *sc_rbuf,
*sc_ebuf;
u_char *sc_tba;
u_int sc_tbc,
sc_heldtbc;
volatile u_char sc_rx_flags,
#define RX_TTY_BLOCKED 0x01
#define RX_TTY_OVERFLOWED 0x02
#define RX_IBUF_BLOCKED 0x04
#define RX_IBUF_OVERFLOWED 0x08
#define RX_ANY_BLOCK 0x0f
sc_tx_busy,
sc_tx_done,
sc_tx_stopped,
sc_st_check,
sc_rx_ready;
/* data to stored in UART registers.
actual write to UART register is pended while sc_tx_busy */
uint16_t sc_ucon; /* control register */
uint16_t sc_ubrdiv; /* baudrate register */
uint8_t sc_heldchange; /* register changes are pended */
uint8_t sc_ulcon; /* line control */
uint8_t sc_umcon; /* modem control */
#define UMCON_HW_MASK (UMCON_RTS)
#define UMCON_DTR (1<<4) /* provided by other means such as GPIO */
uint8_t sc_msts; /* modem status */
#define MSTS_CTS UMSTAT_CTS /* bit0 */
#define MSTS_DCD (1<<1)
#define MSTS_DSR (1<<2)
uint8_t sc_msr_dcd; /* DCD or 0 */
uint8_t sc_mcr_dtr; /* DTR or 0 or DTR|RTS*/
uint8_t sc_mcr_rts; /* RTS or DTR in sc_umcon */
uint8_t sc_msr_cts; /* CTS or DCD in sc_msts */
uint8_t sc_msr_mask; /* sc_msr_cts|sc_msr_dcd */
uint8_t sc_mcr_active;
uint8_t sc_msr_delta;
uint8_t sc_rx_irqno, sc_tx_irqno;
#if 0
/* PPS signal on DCD, with or without inkernel clock disciplining */
u_char sc_ppsmask; /* pps signal mask */
u_char sc_ppsassert; /* pps leading edge */
u_char sc_ppsclear; /* pps trailing edge */
pps_info_t ppsinfo;
pps_params_t ppsparam;
#endif
#if NRND > 0 && defined(RND_COM)
rndsource_element_t rnd_source;
#endif
#if (defined(MULTIPROCESSOR) || defined(LOCKDEBUG)) && defined(SSCOM_MPLOCK)
struct simplelock sc_lock;
#endif
/*
* S3C2XX0's UART doesn't have modem control/status pins.
* On platforms with S3C2XX0, those pins are simply unavailable
* or provided by other means such as GPIO. Platform specific attach routine
* have to provide functions to read/write modem control/status pins.
*/
int (* read_modem_status)( struct sscom_softc * );
void (* set_modem_control)( struct sscom_softc * );
};
/* Macros to clear/set/test flags. */
#define SET(t, f) (t) |= (f)
#define CLR(t, f) (t) &= ~(f)
#define ISSET(t, f) ((t) & (f))
/* UART register address, etc. */
struct sscom_uart_info {
int unit;
char tx_int, rx_int, err_int;
bus_addr_t iobase;
};
#define sscom_rxrdy(iot,ioh) \
(bus_space_read_1((iot), (ioh), SSCOM_UTRSTAT) & UTRSTAT_RXREADY)
#define sscom_getc(iot,ioh) bus_space_read_1((iot), (ioh), SSCOM_URXH)
#define sscom_geterr(iot,ioh) bus_space_read_1((iot), (ioh), SSCOM_UERSTAT)
#define sscom_enable_rxint(sc) (s3c2xx0_unmask_interrupts(1<<sc->sc_rx_irqno), \
(sc->sc_hwflags |= SSCOM_HW_RXINT))
#define sscom_disable_rxint(sc) (s3c2xx0_mask_interrupts(1<<sc->sc_rx_irqno), \
(sc->sc_hwflags &= ~SSCOM_HW_RXINT))
#define sscom_enable_txint(sc) (s3c2xx0_unmask_interrupts(1<<sc->sc_tx_irqno), \
(sc->sc_hwflags |= SSCOM_HW_TXINT))
#define sscom_disable_txint(sc) (s3c2xx0_mask_interrupts(1<<sc->sc_tx_irqno), \
(sc->sc_hwflags &= ~SSCOM_HW_TXINT))
#define sscom_enable_txrxint(sc) \
(s3c2xx0_unmask_interrupts((1<<sc->sc_tx_irqno)|(1<<sc->sc_rx_irqno)), \
(sc->sc_hwflags |= (SSCOM_HW_TXINT|SSCOM_HW_RXINT)))
#define sscom_disable_txrxint(sc) \
(s3c2xx0_mask_interrupts((1<<sc->sc_tx_irqno)|(1<<sc->sc_rx_irqno)), \
(sc->sc_hwflags &= ~(SSCOM_HW_TXINT|SSCOM_HW_RXINT)))
int sscomspeed(long, long);
void sscom_attach_subr(struct sscom_softc *);
int sscom_detach(struct device *, int);
int sscom_activate(struct device *, enum devact);
void sscom_shutdown(struct sscom_softc *);
void sscomdiag (void *);
void sscomstart(struct tty *);
int sscomparam(struct tty *, struct termios *);
int sscomread(dev_t, struct uio *, int);
void sscom_config(struct sscom_softc *);
int sscomintr(void *);
int sscom_cnattach(bus_space_tag_t, const struct sscom_uart_info *,
int, int, tcflag_t);
void sscom_cndetach(void);
int sscom_is_console(bus_space_tag_t, int, bus_space_handle_t *);
#ifdef KGDB
int sscom_kgdb_attach(bus_space_tag_t, const struct sscom_uart_info *,
int, int, tcflag_t);
#endif
#endif /* _ARM_S3C2XX0_SSCOM_VAR_H */
Reference in New Issue View Git Blame Copy Permalink