NetBSD/sys/miscfs/genfs/layer_vnops.c

834 lines
24 KiB
C

/* $NetBSD: layer_vnops.c,v 1.58 2014/05/25 13:51:25 hannken Exp $ */
/*
* Copyright (c) 1999 National Aeronautics & Space Administration
* All rights reserved.
*
* This software was written by William Studenmund of the
* Numerical Aerospace Simulation Facility, NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the National Aeronautics & Space Administration
* nor the names of its contributors may be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NATIONAL AERONAUTICS & SPACE ADMINISTRATION
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE ADMINISTRATION OR CONTRIB-
* UTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* John Heidemann of the UCLA Ficus project.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)null_vnops.c 8.6 (Berkeley) 5/27/95
*
* Ancestors:
* @(#)lofs_vnops.c 1.2 (Berkeley) 6/18/92
* Id: lofs_vnops.c,v 1.11 1992/05/30 10:05:43 jsp Exp jsp
* ...and...
* @(#)null_vnodeops.c 1.20 92/07/07 UCLA Ficus project
*/
/*
* Generic layer vnode operations.
*
* The layer.h, layer_extern.h, layer_vfs.c, and layer_vnops.c files provide
* the core implementation of stacked file-systems.
*
* The layerfs duplicates a portion of the file system name space under
* a new name. In this respect, it is similar to the loopback file system.
* It differs from the loopback fs in two respects: it is implemented using
* a stackable layers technique, and it is "layerfs-nodes" stack above all
* lower-layer vnodes, not just over directory vnodes.
*
* OPERATION OF LAYERFS
*
* The layerfs is the minimum file system layer, bypassing all possible
* operations to the lower layer for processing there. The majority of its
* activity centers on the bypass routine, through which nearly all vnode
* operations pass.
*
* The bypass routine accepts arbitrary vnode operations for handling by
* the lower layer. It begins by examining vnode operation arguments and
* replacing any layered nodes by their lower-layer equivalents. It then
* invokes an operation on the lower layer. Finally, it replaces the
* layered nodes in the arguments and, if a vnode is returned by the
* operation, stacks a layered node on top of the returned vnode.
*
* The bypass routine in this file, layer_bypass(), is suitable for use
* by many different layered filesystems. It can be used by multiple
* filesystems simultaneously. Alternatively, a layered fs may provide
* its own bypass routine, in which case layer_bypass() should be used as
* a model. For instance, the main functionality provided by umapfs, the user
* identity mapping file system, is handled by a custom bypass routine.
*
* Typically a layered fs registers its selected bypass routine as the
* default vnode operation in its vnodeopv_entry_desc table. Additionally
* the filesystem must store the bypass entry point in the layerm_bypass
* field of struct layer_mount. All other layer routines in this file will
* use the layerm_bypass() routine.
*
* Although the bypass routine handles most operations outright, a number
* of operations are special cased and handled by the layerfs. For instance,
* layer_getattr() must change the fsid being returned. While layer_lock()
* and layer_unlock() must handle any locking for the current vnode as well
* as pass the lock request down. layer_inactive() and layer_reclaim() are
* not bypassed so that they can handle freeing layerfs-specific data. Also,
* certain vnode operations (create, mknod, remove, link, rename, mkdir,
* rmdir, and symlink) change the locking state within the operation. Ideally
* these operations should not change the lock state, but should be changed
* to let the caller of the function unlock them. Otherwise, all intermediate
* vnode layers (such as union, umapfs, etc) must catch these functions to do
* the necessary locking at their layer.
*
* INSTANTIATING VNODE STACKS
*
* Mounting associates "layerfs-nodes" stack and lower layer, in effect
* stacking two VFSes. The initial mount creates a single vnode stack for
* the root of the new layerfs. All other vnode stacks are created as a
* result of vnode operations on this or other layerfs vnode stacks.
*
* New vnode stacks come into existence as a result of an operation which
* returns a vnode. The bypass routine stacks a layerfs-node above the new
* vnode before returning it to the caller.
*
* For example, imagine mounting a null layer with:
*
* "mount_null /usr/include /dev/layer/null"
*
* Changing directory to /dev/layer/null will assign the root layerfs-node,
* which was created when the null layer was mounted). Now consider opening
* "sys". A layer_lookup() would be performed on the root layerfs-node.
* This operation would bypass through to the lower layer which would return
* a vnode representing the UFS "sys". Then, layer_bypass() builds a
* layerfs-node aliasing the UFS "sys" and returns this to the caller.
* Later operations on the layerfs-node "sys" will repeat this process when
* constructing other vnode stacks.
*
* INVOKING OPERATIONS ON LOWER LAYERS
*
* There are two techniques to invoke operations on a lower layer when the
* operation cannot be completely bypassed. Each method is appropriate in
* different situations. In both cases, it is the responsibility of the
* aliasing layer to make the operation arguments "correct" for the lower
* layer by mapping any vnode arguments to the lower layer.
*
* The first approach is to call the aliasing layer's bypass routine. This
* method is most suitable when you wish to invoke the operation currently
* being handled on the lower layer. It has the advantage that the bypass
* routine already must do argument mapping. An example of this is
* layer_getattr().
*
* A second approach is to directly invoke vnode operations on the lower
* layer with the VOP_OPERATIONNAME interface. The advantage of this method
* is that it is easy to invoke arbitrary operations on the lower layer.
* The disadvantage is that vnode's arguments must be manually mapped.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: layer_vnops.c,v 1.58 2014/05/25 13:51:25 hannken Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/time.h>
#include <sys/vnode.h>
#include <sys/mount.h>
#include <sys/namei.h>
#include <sys/kmem.h>
#include <sys/buf.h>
#include <sys/kauth.h>
#include <miscfs/genfs/layer.h>
#include <miscfs/genfs/layer_extern.h>
#include <miscfs/genfs/genfs.h>
#include <miscfs/specfs/specdev.h>
/*
* This is the 08-June-99 bypass routine, based on the 10-Apr-92 bypass
* routine by John Heidemann.
* The new element for this version is that the whole nullfs
* system gained the concept of locks on the lower node.
* The 10-Apr-92 version was optimized for speed, throwing away some
* safety checks. It should still always work, but it's not as
* robust to programmer errors.
*
* In general, we map all vnodes going down and unmap them on the way back.
*
* Also, some BSD vnode operations have the side effect of vrele'ing
* their arguments. With stacking, the reference counts are held
* by the upper node, not the lower one, so we must handle these
* side-effects here. This is not of concern in Sun-derived systems
* since there are no such side-effects.
*
* New for the 08-June-99 version: we also handle operations which unlock
* the passed-in node (typically they vput the node).
*
* This makes the following assumptions:
* - only one returned vpp
* - no INOUT vpp's (Sun's vop_open has one of these)
* - the vnode operation vector of the first vnode should be used
* to determine what implementation of the op should be invoked
* - all mapped vnodes are of our vnode-type (NEEDSWORK:
* problems on rmdir'ing mount points and renaming?)
*/
int
layer_bypass(void *v)
{
struct vop_generic_args /* {
struct vnodeop_desc *a_desc;
<other random data follows, presumably>
} */ *ap = v;
int (**our_vnodeop_p)(void *);
struct vnode **this_vp_p;
int error;
struct vnode *old_vps[VDESC_MAX_VPS], *vp0;
struct vnode **vps_p[VDESC_MAX_VPS];
struct vnode ***vppp;
struct mount *mp;
struct vnodeop_desc *descp = ap->a_desc;
int reles, i, flags;
#ifdef DIAGNOSTIC
/*
* We require at least one vp.
*/
if (descp->vdesc_vp_offsets == NULL ||
descp->vdesc_vp_offsets[0] == VDESC_NO_OFFSET)
panic("%s: no vp's in map.\n", __func__);
#endif
vps_p[0] =
VOPARG_OFFSETTO(struct vnode**, descp->vdesc_vp_offsets[0], ap);
vp0 = *vps_p[0];
mp = vp0->v_mount;
flags = MOUNTTOLAYERMOUNT(mp)->layerm_flags;
our_vnodeop_p = vp0->v_op;
if (flags & LAYERFS_MBYPASSDEBUG)
printf("%s: %s\n", __func__, descp->vdesc_name);
/*
* Map the vnodes going in.
* Later, we'll invoke the operation based on
* the first mapped vnode's operation vector.
*/
reles = descp->vdesc_flags;
for (i = 0; i < VDESC_MAX_VPS; reles >>= 1, i++) {
if (descp->vdesc_vp_offsets[i] == VDESC_NO_OFFSET)
break; /* bail out at end of list */
vps_p[i] = this_vp_p =
VOPARG_OFFSETTO(struct vnode**, descp->vdesc_vp_offsets[i],
ap);
/*
* We're not guaranteed that any but the first vnode
* are of our type. Check for and don't map any
* that aren't. (We must always map first vp or vclean fails.)
*/
if (i && (*this_vp_p == NULL ||
(*this_vp_p)->v_op != our_vnodeop_p)) {
old_vps[i] = NULL;
} else {
old_vps[i] = *this_vp_p;
*(vps_p[i]) = LAYERVPTOLOWERVP(*this_vp_p);
/*
* XXX - Several operations have the side effect
* of vrele'ing their vp's. We must account for
* that. (This should go away in the future.)
*/
if (reles & VDESC_VP0_WILLRELE)
vref(*this_vp_p);
}
}
/*
* Call the operation on the lower layer
* with the modified argument structure.
*/
error = VCALL(*vps_p[0], descp->vdesc_offset, ap);
/*
* Maintain the illusion of call-by-value
* by restoring vnodes in the argument structure
* to their original value.
*/
reles = descp->vdesc_flags;
for (i = 0; i < VDESC_MAX_VPS; reles >>= 1, i++) {
if (descp->vdesc_vp_offsets[i] == VDESC_NO_OFFSET)
break; /* bail out at end of list */
if (old_vps[i]) {
*(vps_p[i]) = old_vps[i];
if (reles & VDESC_VP0_WILLRELE)
vrele(*(vps_p[i]));
}
}
/*
* Map the possible out-going vpp
* (Assumes that the lower layer always returns
* a VREF'ed vpp unless it gets an error.)
*/
if (descp->vdesc_vpp_offset != VDESC_NO_OFFSET && !error) {
vppp = VOPARG_OFFSETTO(struct vnode***,
descp->vdesc_vpp_offset, ap);
/*
* Only vop_lookup, vop_create, vop_makedir, vop_mknod
* and vop_symlink return vpp's. vop_lookup doesn't call bypass
* as a lookup on "." would generate a locking error.
* So all the calls which get us here have a unlocked vpp. :-)
*/
error = layer_node_create(mp, **vppp, *vppp);
if (error) {
vrele(**vppp);
**vppp = NULL;
}
}
return error;
}
/*
* We have to carry on the locking protocol on the layer vnodes
* as we progress through the tree. We also have to enforce read-only
* if this layer is mounted read-only.
*/
int
layer_lookup(void *v)
{
struct vop_lookup_v2_args /* {
struct vnodeop_desc *a_desc;
struct vnode * a_dvp;
struct vnode ** a_vpp;
struct componentname * a_cnp;
} */ *ap = v;
struct componentname *cnp = ap->a_cnp;
struct vnode *dvp, *lvp, *ldvp;
int error, flags = cnp->cn_flags;
dvp = ap->a_dvp;
if ((flags & ISLASTCN) && (dvp->v_mount->mnt_flag & MNT_RDONLY) &&
(cnp->cn_nameiop == DELETE || cnp->cn_nameiop == RENAME)) {
*ap->a_vpp = NULL;
return EROFS;
}
ldvp = LAYERVPTOLOWERVP(dvp);
ap->a_dvp = ldvp;
error = VCALL(ldvp, ap->a_desc->vdesc_offset, ap);
lvp = *ap->a_vpp;
*ap->a_vpp = NULL;
if (error == EJUSTRETURN && (flags & ISLASTCN) &&
(dvp->v_mount->mnt_flag & MNT_RDONLY) &&
(cnp->cn_nameiop == CREATE || cnp->cn_nameiop == RENAME))
error = EROFS;
/*
* We must do the same locking and unlocking at this layer as
* is done in the layers below us.
*/
if (ldvp == lvp) {
/*
* Got the same object back, because we looked up ".",
* or ".." in the root node of a mount point.
* So we make another reference to dvp and return it.
*/
vref(dvp);
*ap->a_vpp = dvp;
vrele(lvp);
} else if (lvp != NULL) {
/* Note: dvp and ldvp are both locked. */
error = layer_node_create(dvp->v_mount, lvp, ap->a_vpp);
if (error) {
vrele(lvp);
}
}
return error;
}
/*
* Setattr call. Disallow write attempts if the layer is mounted read-only.
*/
int
layer_setattr(void *v)
{
struct vop_setattr_args /* {
struct vnodeop_desc *a_desc;
struct vnode *a_vp;
struct vattr *a_vap;
kauth_cred_t a_cred;
struct lwp *a_l;
} */ *ap = v;
struct vnode *vp = ap->a_vp;
struct vattr *vap = ap->a_vap;
if ((vap->va_flags != VNOVAL || vap->va_uid != (uid_t)VNOVAL ||
vap->va_gid != (gid_t)VNOVAL || vap->va_atime.tv_sec != VNOVAL ||
vap->va_mtime.tv_sec != VNOVAL || vap->va_mode != (mode_t)VNOVAL) &&
(vp->v_mount->mnt_flag & MNT_RDONLY))
return EROFS;
if (vap->va_size != VNOVAL) {
switch (vp->v_type) {
case VDIR:
return EISDIR;
case VCHR:
case VBLK:
case VSOCK:
case VFIFO:
return 0;
case VREG:
case VLNK:
default:
/*
* Disallow write attempts if the filesystem is
* mounted read-only.
*/
if (vp->v_mount->mnt_flag & MNT_RDONLY)
return EROFS;
}
}
return LAYERFS_DO_BYPASS(vp, ap);
}
/*
* We handle getattr only to change the fsid.
*/
int
layer_getattr(void *v)
{
struct vop_getattr_args /* {
struct vnode *a_vp;
struct vattr *a_vap;
kauth_cred_t a_cred;
struct lwp *a_l;
} */ *ap = v;
struct vnode *vp = ap->a_vp;
int error;
error = LAYERFS_DO_BYPASS(vp, ap);
if (error) {
return error;
}
/* Requires that arguments be restored. */
ap->a_vap->va_fsid = vp->v_mount->mnt_stat.f_fsidx.__fsid_val[0];
return 0;
}
int
layer_access(void *v)
{
struct vop_access_args /* {
struct vnode *a_vp;
int a_mode;
kauth_cred_t a_cred;
struct lwp *a_l;
} */ *ap = v;
struct vnode *vp = ap->a_vp;
mode_t mode = ap->a_mode;
/*
* Disallow write attempts on read-only layers;
* unless the file is a socket, fifo, or a block or
* character device resident on the file system.
*/
if (mode & VWRITE) {
switch (vp->v_type) {
case VDIR:
case VLNK:
case VREG:
if (vp->v_mount->mnt_flag & MNT_RDONLY)
return EROFS;
break;
default:
break;
}
}
return LAYERFS_DO_BYPASS(vp, ap);
}
/*
* We must handle open to be able to catch MNT_NODEV and friends.
*/
int
layer_open(void *v)
{
struct vop_open_args /* {
const struct vnodeop_desc *a_desc;
struct vnode *a_vp;
int a_mode;
kauth_cred_t a_cred;
} */ *ap = v;
struct vnode *vp = ap->a_vp;
enum vtype lower_type = LAYERVPTOLOWERVP(vp)->v_type;
if (((lower_type == VBLK) || (lower_type == VCHR)) &&
(vp->v_mount->mnt_flag & MNT_NODEV))
return ENXIO;
return LAYERFS_DO_BYPASS(vp, ap);
}
/*
* If vinvalbuf is calling us, it's a "shallow fsync" -- don't bother
* syncing the underlying vnodes, since they'll be fsync'ed when
* reclaimed; otherwise, pass it through to the underlying layer.
*
* XXX Do we still need to worry about shallow fsync?
*/
int
layer_fsync(void *v)
{
struct vop_fsync_args /* {
struct vnode *a_vp;
kauth_cred_t a_cred;
int a_flags;
off_t offlo;
off_t offhi;
struct lwp *a_l;
} */ *ap = v;
int error;
if (ap->a_flags & FSYNC_RECLAIM) {
return 0;
}
if (ap->a_vp->v_type == VBLK || ap->a_vp->v_type == VCHR) {
error = spec_fsync(v);
if (error)
return error;
}
return LAYERFS_DO_BYPASS(ap->a_vp, ap);
}
int
layer_inactive(void *v)
{
struct vop_inactive_args /* {
struct vnode *a_vp;
bool *a_recycle;
} */ *ap = v;
struct vnode *vp = ap->a_vp;
/*
* If we did a remove, don't cache the node.
*/
*ap->a_recycle = ((VTOLAYER(vp)->layer_flags & LAYERFS_REMOVED) != 0);
/*
* Do nothing (and _don't_ bypass).
* Wait to vrele lowervp until reclaim,
* so that until then our layer_node is in the
* cache and reusable.
*
* NEEDSWORK: Someday, consider inactive'ing
* the lowervp and then trying to reactivate it
* with capabilities (v_id)
* like they do in the name lookup cache code.
* That's too much work for now.
*/
VOP_UNLOCK(vp);
return 0;
}
int
layer_remove(void *v)
{
struct vop_remove_args /* {
struct vonde *a_dvp;
struct vnode *a_vp;
struct componentname *a_cnp;
} */ *ap = v;
struct vnode *vp = ap->a_vp;
int error;
vref(vp);
error = LAYERFS_DO_BYPASS(vp, ap);
if (error == 0) {
VTOLAYER(vp)->layer_flags |= LAYERFS_REMOVED;
}
vrele(vp);
return error;
}
int
layer_rename(void *v)
{
struct vop_rename_args /* {
struct vnode *a_fdvp;
struct vnode *a_fvp;
struct componentname *a_fcnp;
struct vnode *a_tdvp;
struct vnode *a_tvp;
struct componentname *a_tcnp;
} */ *ap = v;
struct vnode *fdvp = ap->a_fdvp, *tvp;
int error;
tvp = ap->a_tvp;
if (tvp) {
if (tvp->v_mount != fdvp->v_mount)
tvp = NULL;
else
vref(tvp);
}
error = LAYERFS_DO_BYPASS(fdvp, ap);
if (tvp) {
if (error == 0)
VTOLAYER(tvp)->layer_flags |= LAYERFS_REMOVED;
vrele(tvp);
}
return error;
}
int
layer_rmdir(void *v)
{
struct vop_rmdir_args /* {
struct vnode *a_dvp;
struct vnode *a_vp;
struct componentname *a_cnp;
} */ *ap = v;
int error;
struct vnode *vp = ap->a_vp;
vref(vp);
error = LAYERFS_DO_BYPASS(vp, ap);
if (error == 0) {
VTOLAYER(vp)->layer_flags |= LAYERFS_REMOVED;
}
vrele(vp);
return error;
}
int
layer_revoke(void *v)
{
struct vop_revoke_args /* {
struct vnode *a_vp;
int a_flags;
} */ *ap = v;
struct vnode *vp = ap->a_vp;
struct vnode *lvp = LAYERVPTOLOWERVP(vp);
int error;
/*
* We will most likely end up in vclean which uses the v_usecount
* to determine if a vnode is active. Take an extra reference on
* the lower vnode so it will always close and inactivate.
*/
vref(lvp);
error = LAYERFS_DO_BYPASS(vp, ap);
vrele(lvp);
return error;
}
int
layer_reclaim(void *v)
{
struct vop_reclaim_args /* {
struct vnode *a_vp;
struct lwp *a_l;
} */ *ap = v;
struct vnode *vp = ap->a_vp;
struct layer_mount *lmp = MOUNTTOLAYERMOUNT(vp->v_mount);
struct layer_node *xp = VTOLAYER(vp);
struct vnode *lowervp = xp->layer_lowervp;
/*
* Note: in vop_reclaim, the node's struct lock has been
* decomissioned, so we have to be careful about calling
* VOP's on ourself. We must be careful as VXLOCK is set.
*/
if (vp == lmp->layerm_rootvp) {
/*
* Oops! We no longer have a root node. Most likely reason is
* that someone forcably unmunted the underlying fs.
*
* Now getting the root vnode will fail. We're dead. :-(
*/
lmp->layerm_rootvp = NULL;
}
vcache_remove(vp->v_mount, &lowervp, sizeof(lowervp));
/* After this assignment, this node will not be re-used. */
xp->layer_lowervp = NULL;
kmem_free(vp->v_data, lmp->layerm_size);
vp->v_data = NULL;
vrele(lowervp);
return 0;
}
int
layer_lock(void *v)
{
struct vop_lock_args /* {
struct vnode *a_vp;
int a_flags;
} */ *ap = v;
struct vnode *vp = ap->a_vp;
struct vnode *lowervp = LAYERVPTOLOWERVP(vp);
int flags = ap->a_flags;
int error;
if (ISSET(flags, LK_NOWAIT)) {
error = VOP_LOCK(lowervp, flags);
if (error)
return error;
if (mutex_tryenter(vp->v_interlock)) {
error = vdead_check(vp, VDEAD_NOWAIT);
mutex_exit(vp->v_interlock);
} else
error = EBUSY;
if (error)
VOP_UNLOCK(lowervp);
return error;
}
error = VOP_LOCK(lowervp, flags);
if (error)
return error;
mutex_enter(vp->v_interlock);
error = vdead_check(vp, VDEAD_NOWAIT);
if (error) {
VOP_UNLOCK(lowervp);
error = vdead_check(vp, 0);
KASSERT(error == ENOENT);
}
mutex_exit(vp->v_interlock);
return error;
}
/*
* We just feed the returned vnode up to the caller - there's no need
* to build a layer node on top of the node on which we're going to do
* i/o. :-)
*/
int
layer_bmap(void *v)
{
struct vop_bmap_args /* {
struct vnode *a_vp;
daddr_t a_bn;
struct vnode **a_vpp;
daddr_t *a_bnp;
int *a_runp;
} */ *ap = v;
struct vnode *vp;
vp = LAYERVPTOLOWERVP(ap->a_vp);
ap->a_vp = vp;
return VCALL(vp, ap->a_desc->vdesc_offset, ap);
}
int
layer_print(void *v)
{
struct vop_print_args /* {
struct vnode *a_vp;
} */ *ap = v;
struct vnode *vp = ap->a_vp;
printf ("\ttag VT_LAYERFS, vp=%p, lowervp=%p\n", vp, LAYERVPTOLOWERVP(vp));
return 0;
}
int
layer_getpages(void *v)
{
struct vop_getpages_args /* {
struct vnode *a_vp;
voff_t a_offset;
struct vm_page **a_m;
int *a_count;
int a_centeridx;
vm_prot_t a_access_type;
int a_advice;
int a_flags;
} */ *ap = v;
struct vnode *vp = ap->a_vp;
KASSERT(mutex_owned(vp->v_interlock));
if (ap->a_flags & PGO_LOCKED) {
return EBUSY;
}
ap->a_vp = LAYERVPTOLOWERVP(vp);
KASSERT(vp->v_interlock == ap->a_vp->v_interlock);
/* Just pass the request on to the underlying layer. */
return VCALL(ap->a_vp, VOFFSET(vop_getpages), ap);
}
int
layer_putpages(void *v)
{
struct vop_putpages_args /* {
struct vnode *a_vp;
voff_t a_offlo;
voff_t a_offhi;
int a_flags;
} */ *ap = v;
struct vnode *vp = ap->a_vp;
KASSERT(mutex_owned(vp->v_interlock));
ap->a_vp = LAYERVPTOLOWERVP(vp);
KASSERT(vp->v_interlock == ap->a_vp->v_interlock);
if (ap->a_flags & PGO_RECLAIM) {
mutex_exit(vp->v_interlock);
return 0;
}
/* Just pass the request on to the underlying layer. */
return VCALL(ap->a_vp, VOFFSET(vop_putpages), ap);
}