NetBSD/sys/dev/mvme/osiop_pcctwo.c
2009-03-23 18:59:57 +00:00

192 lines
5.4 KiB
C

/* $NetBSD: osiop_pcctwo.c,v 1.14 2009/03/23 18:59:57 scw Exp $ */
/*-
* Copyright (c) 1999, 2002 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Steve C. Woodford.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Front-end attachment code for the ncr53c710 SCSI controller
* on mvme68k/mvme88k boards.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: osiop_pcctwo.c,v 1.14 2009/03/23 18:59:57 scw Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <sys/cpu.h>
#include <sys/bus.h>
#include <machine/autoconf.h>
#include <dev/ic/osiopreg.h>
#include <dev/ic/osiopvar.h>
#include <dev/mvme/pcctworeg.h>
#include <dev/mvme/pcctwovar.h>
#include "ioconf.h"
int osiop_pcctwo_match(device_t, cfdata_t, void *);
void osiop_pcctwo_attach(device_t, device_t, void *);
struct osiop_pcctwo_softc {
struct osiop_softc sc_osiop;
struct evcnt sc_evcnt;
};
CFATTACH_DECL_NEW(osiop_pcctwo, sizeof(struct osiop_pcctwo_softc),
osiop_pcctwo_match, osiop_pcctwo_attach, NULL, NULL);
static int osiop_pcctwo_intr(void *);
/* ARGSUSED */
int
osiop_pcctwo_match(device_t parent, cfdata_t cf, void *args)
{
struct pcctwo_attach_args *pa;
bus_space_handle_t bsh;
int rv;
pa = args;
if (strcmp(pa->pa_name, osiop_cd.cd_name))
return (0);
/*
* See if the SCSI controller is responding.
*/
if (bus_space_map(pa->pa_bust, pa->pa_offset, OSIOP_NREGS, 0, &bsh))
return (0);
rv = bus_space_peek_1(pa->pa_bust, bsh, OSIOP_CTEST8, NULL);
bus_space_unmap(pa->pa_bust, bsh, OSIOP_NREGS);
if (rv)
return (0);
pa->pa_ipl = cf->pcctwocf_ipl;
return (1);
}
/* ARGSUSED */
void
osiop_pcctwo_attach(device_t parent, device_t self, void *aux)
{
struct pcctwo_attach_args *pa;
struct osiop_pcctwo_softc *sc;
int clk, ctest7;
sc = device_private(self);
pa = aux;
/*
* On the '17x the siop's clock is the same as the CPU clock.
* On the other boards, the siop runs at twice the CPU clock.
* Also, the 17x cannot do proper bus-snooping (the 68060 is
* lame in this repspect) so don't enable it on that board.
*/
#ifdef MVME68K
if (machineid == MVME_172 || machineid == MVME_177) {
clk = cpuspeed;
ctest7 = 0;
} else {
clk = cpuspeed * 2;
ctest7 = OSIOP_CTEST7_SC0;
}
#else
#error Set up siop clock speed for mvme187
#endif
sc->sc_osiop.sc_dev = self;
sc->sc_osiop.sc_bst = pa->pa_bust;
sc->sc_osiop.sc_dmat = pa->pa_dmat;
(void) bus_space_map(sc->sc_osiop.sc_bst, pa->pa_offset, OSIOP_NREGS,
0, &sc->sc_osiop.sc_reg);
sc->sc_osiop.sc_clock_freq = clk;
sc->sc_osiop.sc_ctest7 = ctest7 | OSIOP_CTEST7_TT1;
sc->sc_osiop.sc_dcntl = OSIOP_DCNTL_EA;
sc->sc_osiop.sc_id = 7; /* XXX: Could use NVRAM setting */
/* Attach main MI driver */
osiop_attach(&sc->sc_osiop);
/* Register the event counter */
evcnt_attach_dynamic(&sc->sc_evcnt, EVCNT_TYPE_INTR,
pcctwointr_evcnt(pa->pa_ipl), "disk",
device_xname(sc->sc_osiop.sc_dev));
/* Hook the chip's interrupt */
pcctwointr_establish(PCCTWOV_SCSI, osiop_pcctwo_intr, pa->pa_ipl, sc,
&sc->sc_evcnt);
}
static int
osiop_pcctwo_intr(void *arg)
{
struct osiop_pcctwo_softc *sc = arg;
u_char istat;
/*
* Catch any errors which can happen when the SIOP is
* local bus master...
*/
istat = pcc2_reg_read(sys_pcctwo, PCC2REG_SCSI_ERR_STATUS);
if ((istat & PCCTWO_ERR_SR_MASK) != 0) {
printf("%s: Local bus error: 0x%02x\n",
device_xname(sc->sc_osiop.sc_dev), istat);
istat |= PCCTWO_ERR_SR_SCLR;
pcc2_reg_write(sys_pcctwo, PCC2REG_SCSI_ERR_STATUS, istat);
}
/* This is potentially nasty, since the IRQ is level triggered... */
if (sc->sc_osiop.sc_flags & OSIOP_INTSOFF)
return (0);
istat = osiop_read_1(&sc->sc_osiop, OSIOP_ISTAT);
if ((istat & (OSIOP_ISTAT_SIP | OSIOP_ISTAT_DIP)) == 0)
return (0);
/* Save interrupt details for the back-end interrupt handler */
sc->sc_osiop.sc_sstat0 = osiop_read_1(&sc->sc_osiop, OSIOP_SSTAT0);
sc->sc_osiop.sc_istat = istat;
sc->sc_osiop.sc_dstat = osiop_read_1(&sc->sc_osiop, OSIOP_DSTAT);
/* Deal with the interrupt */
osiop_intr(&sc->sc_osiop);
return (1);
}