481 lines
13 KiB
C
481 lines
13 KiB
C
/* $NetBSD: scsireg.h,v 1.4 1994/10/26 07:24:59 cgd Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1990, 1993
|
|
* The Regents of the University of California. All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Van Jacobson of Lawrence Berkeley Laboratory.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)scsireg.h 8.1 (Berkeley) 6/10/93
|
|
*/
|
|
|
|
/*
|
|
* HP 98265A SCSI Interface Hardware Description.
|
|
*/
|
|
|
|
struct scsidevice {
|
|
u_char p0, scsi_id;
|
|
#define ID_MASK 0x1f
|
|
#define SCSI_ID 0x07
|
|
#define ID_WORD_DMA 0x20
|
|
u_char p2, scsi_csr;
|
|
#define CSR_IE 0x80
|
|
#define CSR_IR 0x40
|
|
#define SCSI_IPL(csr) ((((csr)>>4)&3)+3)
|
|
#define CSR_DMA32 0x08
|
|
#define CSR_DMAIN 0x04
|
|
#define CSR_DE1 0x02
|
|
#define CSR_DE0 0x01
|
|
u_char p4, scsi_wrap;
|
|
#define WRAP_REQ 0x80
|
|
#define WRAP_ACK 0x40
|
|
#define WRAP_BSY 0x08
|
|
#define WRAP_MSG 0x04
|
|
#define WRAP_CD 0x02
|
|
#define WRAP_IO 0x01
|
|
u_char p6, scsi_hconf;
|
|
#define HCONF_TP 0x80
|
|
#define SCSI_SYNC_XFER(hconf) (((hconf)>>5)&3)
|
|
#define HCONF_SD 0x10
|
|
#define HCONF_PARITY 0x08
|
|
u_char p8[24];
|
|
u_char p32, scsi_bdid;
|
|
u_char p34, scsi_sctl;
|
|
#define SCTL_DISABLE 0x80
|
|
#define SCTL_CTRLRST 0x40
|
|
#define SCTL_DIAG 0x20
|
|
#define SCTL_ABRT_ENAB 0x10
|
|
#define SCTL_PARITY_ENAB 0x08
|
|
#define SCTL_SEL_ENAB 0x04
|
|
#define SCTL_RESEL_ENAB 0x02
|
|
#define SCTL_INTR_ENAB 0x01
|
|
u_char p36, scsi_scmd;
|
|
#define SCMD_RST 0x10
|
|
#define SCMD_ICPT_XFR 0x08
|
|
#define SCMD_PROG_XFR 0x04
|
|
#define SCMD_PAD 0x01 /* if initiator */
|
|
#define SCMD_PERR_STOP 0x01 /* if target */
|
|
/* command codes */
|
|
#define SCMD_BUS_REL 0x00
|
|
#define SCMD_SELECT 0x20
|
|
#define SCMD_RST_ATN 0x40
|
|
#define SCMD_SET_ATN 0x60
|
|
#define SCMD_XFR 0x80
|
|
#define SCMD_XFR_PAUSE 0xa0
|
|
#define SCMD_RST_ACK 0xc0
|
|
#define SCMD_SET_ACK 0xe0
|
|
u_char p38, scsi_tmod;
|
|
#define TMOD_SYNC 0x80
|
|
u_char p40, scsi_ints;
|
|
#define INTS_SEL 0x80
|
|
#define INTS_RESEL 0x40
|
|
#define INTS_DISCON 0x20
|
|
#define INTS_CMD_DONE 0x10
|
|
#define INTS_SRV_REQ 0x08
|
|
#define INTS_TIMEOUT 0x04
|
|
#define INTS_HARD_ERR 0x02
|
|
#define INTS_RST 0x01
|
|
u_char p42, scsi_psns;
|
|
#define PSNS_REQ 0x80
|
|
#define PSNS_ACK 0x40
|
|
#define PSNS_ATN 0x20
|
|
#define PSNS_SEL 0x10
|
|
#define PSNS_BSY 0x08
|
|
u_char p44, scsi_ssts;
|
|
#define SSTS_INITIATOR 0x80
|
|
#define SSTS_TARGET 0x40
|
|
#define SSTS_BUSY 0x20
|
|
#define SSTS_XFR 0x10
|
|
#define SSTS_ACTIVE (SSTS_INITIATOR|SSTS_XFR)
|
|
#define SSTS_RST 0x08
|
|
#define SSTS_TCZERO 0x04
|
|
#define SSTS_DREG_FULL 0x02
|
|
#define SSTS_DREG_EMPTY 0x01
|
|
u_char p46, scsi_serr;
|
|
#define SERR_SCSI_PAR 0x80
|
|
#define SERR_SPC_PAR 0x40
|
|
#define SERR_TC_PAR 0x08
|
|
#define SERR_PHASE_ERR 0x04
|
|
#define SERR_SHORT_XFR 0x02
|
|
#define SERR_OFFSET 0x01
|
|
u_char p48, scsi_pctl;
|
|
#define PCTL_BFINT_ENAB 0x80
|
|
u_char p50, scsi_mbc;
|
|
u_char p52, scsi_dreg;
|
|
u_char p54, scsi_temp;
|
|
u_char p56, scsi_tch;
|
|
u_char p58, scsi_tcm;
|
|
u_char p60, scsi_tcl;
|
|
u_char p62, scsi_exbf;
|
|
};
|
|
|
|
/* psns/pctl phase lines as bits */
|
|
#define PHASE_MSG 0x04
|
|
#define PHASE_CD 0x02 /* =1 if 'command' */
|
|
#define PHASE_IO 0x01 /* =1 if data inbound */
|
|
/* Phase lines as values */
|
|
#define PHASE 0x07 /* mask for psns/pctl phase */
|
|
#define DATA_OUT_PHASE 0x00
|
|
#define DATA_IN_PHASE 0x01
|
|
#define CMD_PHASE 0x02
|
|
#define STATUS_PHASE 0x03
|
|
#define BUS_FREE_PHASE 0x04
|
|
#define ARB_SEL_PHASE 0x05 /* Fuji chip combines arbitration with sel. */
|
|
#define MESG_OUT_PHASE 0x06
|
|
#define MESG_IN_PHASE 0x07
|
|
|
|
/* SCSI Messages */
|
|
|
|
#define MSG_CMD_COMPLETE 0x00
|
|
#define MSG_EXT_MESSAGE 0x01
|
|
#define MSG_SAVE_DATA_PTR 0x02
|
|
#define MSG_RESTORE_PTR 0x03
|
|
#define MSG_DISCONNECT 0x04
|
|
#define MSG_INIT_DETECT_ERROR 0x05
|
|
#define MSG_ABORT 0x06
|
|
#define MSG_REJECT 0x07
|
|
#define MSG_NOOP 0x08
|
|
#define MSG_PARITY_ERROR 0x09
|
|
#define MSG_BUS_DEVICE_RESET 0x0C
|
|
#define MSG_IDENTIFY 0x80
|
|
#define MSG_IDENTIFY_DR 0xc0 /* (disconnect/reconnect allowed) */
|
|
#define MSG_SYNC_REQ 0x01
|
|
|
|
/* SCSI Commands */
|
|
|
|
#define CMD_TEST_UNIT_READY 0x00
|
|
#define CMD_REQUEST_SENSE 0x03
|
|
#define CMD_INQUIRY 0x12
|
|
#define CMD_SEND_DIAGNOSTIC 0x1D
|
|
|
|
#define CMD_REWIND 0x01
|
|
#define CMD_REZERO 0x01
|
|
#define CMD_FORMAT_UNIT 0x04
|
|
#define CMD_READ_BLOCK_LIMITS 0x05
|
|
#define CMD_REASSIGN_BLOCKS 0x07
|
|
#define CMD_READ 0x08
|
|
#define CMD_WRITE 0x0A
|
|
#define CMD_WRITE_FILEMARK 0x10
|
|
#define CMD_SPACE 0x11
|
|
#define CMD_MODE_SELECT 0x15
|
|
#define CMD_RELEASE_UNIT 0x17
|
|
#define CMD_ERASE 0x19
|
|
#define CMD_MODE_SENSE 0x1A
|
|
#define CMD_LOADUNLOAD 0x1B
|
|
#define CMD_RECEIVE_DIAG 0x1C
|
|
#define CMD_SEND_DIAG 0x1D
|
|
#define CMD_P_A_MEDIA_REMOVAL 0x1E
|
|
#define CMD_READ_CAPACITY 0x25
|
|
#define CMD_READ_EXT 0x28
|
|
#define CMD_WRITE_EXT 0x2A
|
|
#define CMD_READ_DEFECT_DATA 0x37
|
|
#define SD_MANUFAC_DEFECTS 0x14000000
|
|
#define SD_GROWN_DEFECTS 0x0c000000
|
|
#define CMD_READ_BUFFER 0x3B
|
|
#define CMD_WRITE_BUFFER 0x3C
|
|
#define CMD_READ_FULL 0xF0
|
|
#define CMD_MEDIA_TEST 0xF1
|
|
#define CMD_ACCESS_LOG 0xF2
|
|
#define CMD_WRITE_FULL 0xFC
|
|
#define CMD_MANAGE_PRIMARY 0xFD
|
|
#define CMD_EXECUTE_DATA 0xFE
|
|
|
|
/* SCSI status bits */
|
|
|
|
#define STS_CHECKCOND 0x02 /* Check Condition (ie., read sense) */
|
|
#define STS_CONDMET 0x04 /* Condition Met (ie., search worked) */
|
|
#define STS_BUSY 0x08
|
|
#define STS_INTERMED 0x10 /* Intermediate status sent */
|
|
#define STS_EXT 0x80 /* Extended status valid */
|
|
|
|
/* command descriptor blocks */
|
|
|
|
struct scsi_cdb6 {
|
|
u_char cmd; /* command code */
|
|
u_char lun: 3, /* logical unit on ctlr */
|
|
lbah: 5; /* msb of read/write logical block addr */
|
|
u_char lbam; /* middle byte of l.b.a. */
|
|
u_char lbal; /* lsb of l.b.a. */
|
|
u_char len; /* transfer length */
|
|
u_char xtra;
|
|
};
|
|
|
|
struct scsi_cdb10 {
|
|
u_char cmd; /* command code */
|
|
u_char lun: 3, /* logical unit on ctlr */
|
|
: 4,
|
|
rel: 1; /* l.b.a. is relative addr if =1 */
|
|
u_char lbah; /* msb of read/write logical block addr */
|
|
u_char lbahm; /* high middle byte of l.b.a. */
|
|
u_char lbalm; /* low middle byte of l.b.a. */
|
|
u_char lbal; /* lsb of l.b.a. */
|
|
u_char reserved;
|
|
u_char lenh; /* msb transfer length */
|
|
u_char lenl; /* lsb transfer length */
|
|
u_char xtra;
|
|
};
|
|
|
|
/* basic sense data */
|
|
|
|
struct scsi_sense {
|
|
u_char valid: 1, /* l.b.a. is valid */
|
|
class: 3,
|
|
code: 4;
|
|
u_char vu: 4, /* vendor unique */
|
|
lbah: 4;
|
|
u_char lbam;
|
|
u_char lbal;
|
|
};
|
|
|
|
struct scsi_xsense {
|
|
u_char valid: 1, /* l.b.a. is valid */
|
|
class: 3,
|
|
code: 4;
|
|
u_char segment;
|
|
u_char filemark: 1,
|
|
eom: 1,
|
|
ili: 1, /* illegal length indicator */
|
|
rsvd: 1,
|
|
key: 4;
|
|
u_char info1;
|
|
u_char info2;
|
|
u_char info3;
|
|
u_char info4;
|
|
u_char len; /* additional sense length */
|
|
};
|
|
|
|
/* inquiry data */
|
|
struct scsi_inquiry {
|
|
u_char type;
|
|
u_char qual;
|
|
u_char version;
|
|
u_char rsvd;
|
|
u_char len;
|
|
char class[3];
|
|
char vendor_id[8];
|
|
char product_id[16];
|
|
char rev[4];
|
|
};
|
|
|
|
struct scsi_format_parms { /* physical BFI format */
|
|
u_short reserved;
|
|
u_short list_len;
|
|
struct defect {
|
|
unsigned cyl : 24;
|
|
unsigned head : 8;
|
|
long bytes_from_index;
|
|
} defect[127];
|
|
} format_parms;
|
|
|
|
struct scsi_reassign_parms {
|
|
u_short reserved;
|
|
u_short list_len; /* length in bytes of defects only */
|
|
struct new_defect {
|
|
unsigned lba; /* logical block address */
|
|
} new_defect[2];
|
|
} reassign_parms;
|
|
|
|
struct scsi_modesel_hdr {
|
|
u_char rsvd1;
|
|
u_char media_type;
|
|
u_char rsvd2;
|
|
u_char block_desc_len;
|
|
u_int density : 8;
|
|
u_int number_blocks :24;
|
|
u_int rsvd3 : 8;
|
|
u_int block_length :24;
|
|
};
|
|
|
|
struct scsi_modesense_hdr {
|
|
u_char len;
|
|
u_char media_type;
|
|
u_char wp : 1;
|
|
u_char rsvd1 : 7;
|
|
u_char block_desc_len;
|
|
u_int density : 8;
|
|
u_int number_blocks :24;
|
|
u_int rsvd2 : 8;
|
|
u_int block_length :24;
|
|
};
|
|
|
|
/*
|
|
* Mode Select / Mode sense "pages"
|
|
*/
|
|
|
|
/*
|
|
* Page One - Error Recovery Parameters
|
|
*/
|
|
struct scsi_err_recovery {
|
|
u_char page_savable : 1; /* save parameters */
|
|
u_char reserved : 1;
|
|
u_char page_code : 6; /* = 0x01 */
|
|
u_char page_length; /* = 6 */
|
|
u_char awre : 1; /* auto write realloc enabled */
|
|
u_char arre : 1; /* auto read realloc enabled */
|
|
u_char tb : 1; /* transfer block */
|
|
u_char rc : 1; /* read continuous */
|
|
u_char eec : 1; /* enable early correction */
|
|
u_char per : 1; /* post error */
|
|
u_char dte : 1; /* disable transfer on error */
|
|
u_char dcr : 1; /* disable correction */
|
|
u_char retry_count;
|
|
u_char correction_span;
|
|
u_char head_offset_count;
|
|
u_char strobe_offset_count;
|
|
u_char recovery_time_limit;
|
|
};
|
|
|
|
/*
|
|
* Page Two - Disconnect / Reconnect Control Parameters
|
|
*/
|
|
struct scsi_disco_reco {
|
|
u_char page_savable : 1; /* save parameters */
|
|
u_char rsvd : 1;
|
|
u_char page_code : 6; /* = 0x02 */
|
|
u_char page_length; /* = 10 */
|
|
u_char buffer_full_ratio; /* write, how full before reconnect? */
|
|
u_char buffer_empty_ratio; /* read, how full before reconnect? */
|
|
|
|
u_short bus_inactivity_limit; /* how much bus time for busy */
|
|
u_short disconnect_time_limit; /* min to remain disconnected */
|
|
u_short connect_time_limit; /* min to remain connected */
|
|
u_short reserved_1;
|
|
};
|
|
|
|
/*
|
|
* Page Three - Direct Access Device Format Parameters
|
|
*/
|
|
struct scsi_format {
|
|
u_char page_savable : 1; /* save parameters */
|
|
u_char rsvd : 1;
|
|
u_char page_code : 6; /* = 0x03 */
|
|
u_char page_length; /* = 22 */
|
|
u_short tracks_per_zone; /* Handling of Defects Fields */
|
|
u_short alt_sect_zone;
|
|
u_short alt_tracks_zone;
|
|
u_short alt_tracks_vol;
|
|
u_short sect_track; /* Track Format Field */
|
|
u_short data_sect; /* Sector Format Fields */
|
|
u_short interleave;
|
|
u_short track_skew_factor;
|
|
u_short cyl_skew_factor;
|
|
u_char ssec : 1; /* Drive Type Field */
|
|
u_char hsec : 1;
|
|
u_char rmb : 1;
|
|
u_char surf : 1;
|
|
u_char ins : 1;
|
|
u_char reserved_1 : 3;
|
|
u_char reserved_2;
|
|
u_char reserved_3;
|
|
u_char reserved_4;
|
|
};
|
|
|
|
/*
|
|
* Page Four - Rigid Disk Drive Geometry Parameters
|
|
*/
|
|
struct scsi_geometry {
|
|
u_char page_savable : 1; /* save parameters */
|
|
u_char rsvd : 1;
|
|
u_char page_code : 6; /* = 0x04 */
|
|
u_char page_length; /* = 18 */
|
|
u_char cyl_ub; /* number of cylinders */
|
|
u_char cyl_mb;
|
|
u_char cyl_lb;
|
|
u_char heads; /* number of heads */
|
|
u_char precomp_cyl_ub; /* cylinder to start precomp */
|
|
u_char precomp_cyl_mb;
|
|
u_char precomp_cyl_lb;
|
|
u_char current_cyl_ub; /* cyl to start reduced current */
|
|
u_char current_cyl_mb;
|
|
u_char current_cyl_lb;
|
|
u_short step_rate; /* drive step rate */
|
|
u_char landing_cyl_ub; /* landing zone cylinder */
|
|
u_char landing_cyl_mb;
|
|
u_char landing_cyl_lb;
|
|
u_char reserved_1;
|
|
u_char reserved_2;
|
|
u_char reserved_3;
|
|
};
|
|
|
|
/*
|
|
* Page 0x38 - Cache Control Parameters
|
|
*/
|
|
struct scsi_cache {
|
|
u_char page_savable : 1; /* save parameters */
|
|
u_char rsvd : 1;
|
|
u_char page_code : 6; /* = 0x38 */
|
|
u_char page_length; /* = 14 */
|
|
u_char rsvd_1 : 1;
|
|
u_char wie : 1; /* write index enable */
|
|
u_char rsvd_2 : 1;
|
|
u_char ce : 1; /* cache enable */
|
|
u_char table_size : 4;
|
|
u_char prefetch_threshold;
|
|
u_char maximum_threshold;
|
|
u_char maximumprefetch_multiplier;
|
|
u_char minimum_threshold;
|
|
u_char minimum_prefetch_multiplier;
|
|
u_char reserved[8];
|
|
};
|
|
|
|
/*
|
|
* Control for SCSI "format" mode.
|
|
*
|
|
* "Format" mode allows a privileged process to issue direct SCSI
|
|
* commands to a drive (it is intended primarily to allow on-line
|
|
* formatting). SDIOCSFORMAT with a non-zero arg will put the drive
|
|
* into format mode; a zero arg will take it out. When in format
|
|
* mode, only the process that issued the SDIOCFORMAT can read or
|
|
* write the drive.
|
|
*
|
|
* In format mode, process is expected to
|
|
* - do SDIOCSCSICOMMAND to supply cdb for next SCSI op
|
|
* - do read or write as appropriate for cdb
|
|
* - if i/o error, optionally do SDIOCSENSE to get completion
|
|
* status and sense data from last scsi operation.
|
|
*/
|
|
|
|
struct scsi_fmt_cdb {
|
|
int len; /* cdb length (in bytes) */
|
|
u_char cdb[28]; /* cdb to use on next read/write */
|
|
};
|
|
|
|
struct scsi_fmt_sense {
|
|
u_int status; /* completion status of last op */
|
|
u_char sense[28]; /* sense data (if any) from last op */
|
|
};
|
|
|
|
#define SDIOCSFORMAT _IOW('S', 0x1, int)
|
|
#define SDIOCGFORMAT _IOR('S', 0x2, int)
|
|
#define SDIOCSCSICOMMAND _IOW('S', 0x3, struct scsi_fmt_cdb)
|
|
#define SDIOCSENSE _IOR('S', 0x4, struct scsi_fmt_sense)
|