Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a0628261fe
NetBSD/sys/dev/pci/cz.c
perry 1f4ad37fe3 "Utilize" has exactly the same meaning as "use," but it is more 
difficult to read and understand. Most manuals of English style
therefore say that you should use "use".
2003-02-05 00:02:24 +00:00

1669 lines
40 KiB
C
Raw Blame History

/* $NetBSD: cz.c,v 1.26 2003/02/05 00:02:37 perry Exp $ */
/*-
* Copyright (c) 2000 Zembu Labs, Inc.
* All rights reserved.
*
* Authors: Jason R. Thorpe <thorpej@zembu.com>
* Bill Studenmund <wrstuden@zembu.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Zembu Labs, Inc.
* 4. Neither the name of Zembu Labs nor the names of its employees may
* be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY ZEMBU LABS, INC. ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WAR-
* RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS-
* CLAIMED. IN NO EVENT SHALL ZEMBU LABS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Cyclades-Z series multi-port serial adapter driver for NetBSD.
*
* Some notes:
*
* - The Cyclades-Z has fully automatic hardware (and software!)
* flow control. We only use RTS/CTS flow control here,
* and it is implemented in a very simplistic manner. This
* may be an area of future work.
*
* - The PLX can map the either the board's RAM or host RAM
* into the MIPS's memory window. This would enable us to
* use less expensive (for us) memory reads/writes to host
* RAM, rather than time-consuming reads/writes to PCI
* memory space. However, the PLX can only map a 0-128M
* window, so we would have to ensure that the DMA address
* of the host RAM fits there. This is kind of a pain,
* so we just don't bother right now.
*
* - In a perfect world, we would use the autoconfiguration
* mechanism to attach the TTYs that we find. However,
* that leads to somewhat icky looking autoconfiguration
* messages (one for every TTY, up to 64 per board!). So
* we don't do it that way, but assign minors as if there
* were the max of 64 ports per board.
*
* - We don't bother with PPS support here. There are so many
* ports, each with a large amount of buffer space, that the
* normal mode of operation is to poll the boards regularly
* (generally, every 20ms or so). This makes this driver
* unsuitable for PPS, as the latency will be generally too
* high.
*/
/*
* This driver inspired by the FreeBSD driver written by Brian J. McGovern
* for FreeBSD 3.2.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: cz.c,v 1.26 2003/02/05 00:02:37 perry Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/tty.h>
#include <sys/conf.h>
#include <sys/time.h>
#include <sys/kernel.h>
#include <sys/fcntl.h>
#include <sys/syslog.h>
#include <sys/callout.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/pci/czreg.h>
#include <dev/pci/plx9060reg.h>
#include <dev/pci/plx9060var.h>
#include <dev/microcode/cyclades-z/cyzfirm.h>
#define CZ_DRIVER_VERSION 0x20000411
#define CZ_POLL_MS 20
/* These are the interrupts we always use. */
#define CZ_INTERRUPTS \
(C_IN_MDSR | C_IN_MRI | C_IN_MRTS | C_IN_MCTS | C_IN_TXBEMPTY | \
C_IN_TXFEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | C_IN_RXNNDT | \
C_IN_MDCD | C_IN_PR_ERROR | C_IN_FR_ERROR | C_IN_OVR_ERROR | \
C_IN_RXOFL | C_IN_IOCTLW | C_IN_RXBRK)
/*
* cztty_softc:
*
* Per-channel (TTY) state.
*/
struct cztty_softc {
struct cz_softc *sc_parent;
struct tty *sc_tty;
struct callout sc_diag_ch;
int sc_channel; /* Also used to flag unattached chan */
#define CZTTY_CHANNEL_DEAD -1
bus_space_tag_t sc_chan_st; /* channel space tag */
bus_space_handle_t sc_chan_sh; /* channel space handle */
bus_space_handle_t sc_buf_sh; /* buffer space handle */
u_int sc_overflows,
sc_parity_errors,
sc_framing_errors,
sc_errors;
int sc_swflags;
u_int32_t sc_rs_control_dtr,
sc_chanctl_hw_flow,
sc_chanctl_comm_baud,
sc_chanctl_rs_control,
sc_chanctl_comm_data_l,
sc_chanctl_comm_parity;
};
/*
* cz_softc:
*
* Per-board state.
*/
struct cz_softc {
struct device cz_dev; /* generic device info */
struct plx9060_config cz_plx; /* PLX 9060 config info */
bus_space_tag_t cz_win_st; /* window space tag */
bus_space_handle_t cz_win_sh; /* window space handle */
struct callout cz_callout; /* callout for polling-mode */
void *cz_ih; /* interrupt handle */
u_int32_t cz_mailbox0; /* our MAILBOX0 value */
int cz_nchannels; /* number of channels */
int cz_nopenchan; /* number of open channels */
struct cztty_softc *cz_ports; /* our array of ports */
bus_addr_t cz_fwctl; /* offset of firmware control */
};
int cz_match(struct device *, struct cfdata *, void *);
void cz_attach(struct device *, struct device *, void *);
int cz_wait_pci_doorbell(struct cz_softc *, const char *);
CFATTACH_DECL(cz, sizeof(struct cz_softc),
cz_match, cz_attach, NULL, NULL);
void cz_reset_board(struct cz_softc *);
int cz_load_firmware(struct cz_softc *);
int cz_intr(void *);
void cz_poll(void *);
int cztty_transmit(struct cztty_softc *, struct tty *);
int cztty_receive(struct cztty_softc *, struct tty *);
struct cztty_softc * cztty_getttysoftc(dev_t dev);
int cztty_attached_ttys;
int cz_timeout_ticks;
void czttystart(struct tty *tp);
int czttyparam(struct tty *tp, struct termios *t);
void cztty_shutdown(struct cztty_softc *sc);
void cztty_modem(struct cztty_softc *sc, int onoff);
void cztty_break(struct cztty_softc *sc, int onoff);
void tiocm_to_cztty(struct cztty_softc *sc, u_long how, int ttybits);
int cztty_to_tiocm(struct cztty_softc *sc);
void cztty_diag(void *arg);
extern struct cfdriver cz_cd;
dev_type_open(czttyopen);
dev_type_close(czttyclose);
dev_type_read(czttyread);
dev_type_write(czttywrite);
dev_type_ioctl(czttyioctl);
dev_type_stop(czttystop);
dev_type_tty(czttytty);
dev_type_poll(czttypoll);
const struct cdevsw cz_cdevsw = {
czttyopen, czttyclose, czttyread, czttywrite, czttyioctl,
czttystop, czttytty, czttypoll, nommap, ttykqfilter, D_TTY
};
/* Macros to clear/set/test flags. */
#define SET(t, f) (t) |= (f)
#define CLR(t, f) (t) &= ~(f)
#define ISSET(t, f) ((t) & (f))
/*
* Macros to read and write the PLX.
*/
#define CZ_PLX_READ(cz, reg) \
bus_space_read_4((cz)->cz_plx.plx_st, (cz)->cz_plx.plx_sh, (reg))
#define CZ_PLX_WRITE(cz, reg, val) \
bus_space_write_4((cz)->cz_plx.plx_st, (cz)->cz_plx.plx_sh, \
(reg), (val))
/*
* Macros to read and write the FPGA. We must already be in the FPGA
* window for this.
*/
#define CZ_FPGA_READ(cz, reg) \
bus_space_read_4((cz)->cz_win_st, (cz)->cz_win_sh, (reg))
#define CZ_FPGA_WRITE(cz, reg, val) \
bus_space_write_4((cz)->cz_win_st, (cz)->cz_win_sh, (reg), (val))
/*
* Macros to read and write the firmware control structures in board RAM.
*/
#define CZ_FWCTL_READ(cz, off) \
bus_space_read_4((cz)->cz_win_st, (cz)->cz_win_sh, \
(cz)->cz_fwctl + (off))
#define CZ_FWCTL_WRITE(cz, off, val) \
bus_space_write_4((cz)->cz_win_st, (cz)->cz_win_sh, \
(cz)->cz_fwctl + (off), (val))
/*
* Convenience macros for cztty routines. PLX window MUST be to RAM.
*/
#define CZTTY_CHAN_READ(sc, off) \
bus_space_read_4((sc)->sc_chan_st, (sc)->sc_chan_sh, (off))
#define CZTTY_CHAN_WRITE(sc, off, val) \
bus_space_write_4((sc)->sc_chan_st, (sc)->sc_chan_sh, \
(off), (val))
#define CZTTY_BUF_READ(sc, off) \
bus_space_read_4((sc)->sc_chan_st, (sc)->sc_buf_sh, (off))
#define CZTTY_BUF_WRITE(sc, off, val) \
bus_space_write_4((sc)->sc_chan_st, (sc)->sc_buf_sh, \
(off), (val))
/*
* Convenience macros.
*/
#define CZ_WIN_RAM(cz) \
do { \
CZ_PLX_WRITE((cz), PLX_LAS0BA, LOCAL_ADDR0_RAM); \
delay(100); \
} while (0)
#define CZ_WIN_FPGA(cz) \
do { \
CZ_PLX_WRITE((cz), PLX_LAS0BA, LOCAL_ADDR0_FPGA); \
delay(100); \
} while (0)
/*****************************************************************************
* Cyclades-Z controller code starts here...
*****************************************************************************/
/*
* cz_match:
*
* Determine if the given PCI device is a Cyclades-Z board.
*/
int
cz_match(struct device *parent,
struct cfdata *match,
void *aux)
{
struct pci_attach_args *pa = aux;
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_CYCLADES) {
switch (PCI_PRODUCT(pa->pa_id)) {
case PCI_PRODUCT_CYCLADES_CYCLOMZ_2:
return (1);
}
}
return (0);
}
/*
* cz_attach:
*
* A Cyclades-Z board was found; attach it.
*/
void
cz_attach(struct device *parent,
struct device *self,
void *aux)
{
struct cz_softc *cz = (void *) self;
struct pci_attach_args *pa = aux;
pci_intr_handle_t ih;
const char *intrstr = NULL;
struct cztty_softc *sc;
struct tty *tp;
int i;
aprint_naive(": Multi-port serial controller\n");
aprint_normal(": Cyclades-Z multiport serial\n");
cz->cz_plx.plx_pc = pa->pa_pc;
cz->cz_plx.plx_tag = pa->pa_tag;
if (pci_mapreg_map(pa, PLX_PCI_RUNTIME_MEMADDR,
PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
&cz->cz_plx.plx_st, &cz->cz_plx.plx_sh, NULL, NULL) != 0) {
aprint_error("%s: unable to map PLX registers\n",
cz->cz_dev.dv_xname);
return;
}
if (pci_mapreg_map(pa, PLX_PCI_LOCAL_ADDR0,
PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
&cz->cz_win_st, &cz->cz_win_sh, NULL, NULL) != 0) {
aprint_error("%s: unable to map device window\n",
cz->cz_dev.dv_xname);
return;
}
cz->cz_mailbox0 = CZ_PLX_READ(cz, PLX_MAILBOX0);
cz->cz_nopenchan = 0;
/*
* Make sure that the board is completely stopped.
*/
CZ_WIN_FPGA(cz);
CZ_FPGA_WRITE(cz, FPGA_CPU_STOP, 0);
/*
* Load the board's firmware.
*/
if (cz_load_firmware(cz) != 0)
return;
/*
* Now that we're ready to roll, map and establish the interrupt
* handler.
*/
if (pci_intr_map(pa, &ih) != 0) {
/*
* The common case is for Cyclades-Z boards to run
* in polling mode, and thus not have an interrupt
* mapped for them. Don't bother reporting that
* the interrupt is not mappable, since this isn't
* really an error.
*/
cz->cz_ih = NULL;
goto polling_mode;
} else {
intrstr = pci_intr_string(pa->pa_pc, ih);
cz->cz_ih = pci_intr_establish(pa->pa_pc, ih, IPL_TTY,
cz_intr, cz);
}
if (cz->cz_ih == NULL) {
aprint_error("%s: unable to establish interrupt",
cz->cz_dev.dv_xname);
if (intrstr != NULL)
aprint_normal(" at %s", intrstr);
aprint_normal("\n");
/* We will fall-back on polling mode. */
} else
aprint_normal("%s: interrupting at %s\n",
cz->cz_dev.dv_xname, intrstr);
polling_mode:
if (cz->cz_ih == NULL) {
callout_init(&cz->cz_callout);
if (cz_timeout_ticks == 0)
cz_timeout_ticks = max(1, hz * CZ_POLL_MS / 1000);
aprint_normal("%s: polling mode, %d ms interval (%d tick%s)\n",
cz->cz_dev.dv_xname, CZ_POLL_MS, cz_timeout_ticks,
cz_timeout_ticks == 1 ? "" : "s");
}
/*
* Allocate sufficient pointers for the children and
* attach them. Set all ports to a reasonable initial
* configuration while we're at it:
*
* disabled
* 8N1
* default baud rate
* hardware flow control.
*/
CZ_WIN_RAM(cz);
if (cz->cz_nchannels == 0) {
/* No channels? No more work to do! */
return;
}
cz->cz_ports = malloc(sizeof(struct cztty_softc) * cz->cz_nchannels,
M_DEVBUF, M_WAITOK|M_ZERO);
cztty_attached_ttys += cz->cz_nchannels;
for (i = 0; i < cz->cz_nchannels; i++) {
sc = &cz->cz_ports[i];
sc->sc_channel = i;
sc->sc_chan_st = cz->cz_win_st;
sc->sc_parent = cz;
if (bus_space_subregion(cz->cz_win_st, cz->cz_win_sh,
cz->cz_fwctl + ZFIRM_CHNCTL_OFF(i, 0),
ZFIRM_CHNCTL_SIZE, &sc->sc_chan_sh)) {
aprint_error(
"%s: unable to subregion channel %d control\n",
cz->cz_dev.dv_xname, i);
sc->sc_channel = CZTTY_CHANNEL_DEAD;
continue;
}
if (bus_space_subregion(cz->cz_win_st, cz->cz_win_sh,
cz->cz_fwctl + ZFIRM_BUFCTL_OFF(i, 0),
ZFIRM_BUFCTL_SIZE, &sc->sc_buf_sh)) {
aprint_error(
"%s: unable to subregion channel %d buffer\n",
cz->cz_dev.dv_xname, i);
sc->sc_channel = CZTTY_CHANNEL_DEAD;
continue;
}
callout_init(&sc->sc_diag_ch);
tp = ttymalloc();
tp->t_dev = makedev(cdevsw_lookup_major(&cz_cdevsw),
(cz->cz_dev.dv_unit * ZFIRM_MAX_CHANNELS) + i);
tp->t_oproc = czttystart;
tp->t_param = czttyparam;
tty_attach(tp);
sc->sc_tty = tp;
CZTTY_CHAN_WRITE(sc, CHNCTL_OP_MODE, C_CH_DISABLE);
CZTTY_CHAN_WRITE(sc, CHNCTL_INTR_ENABLE, CZ_INTERRUPTS);
CZTTY_CHAN_WRITE(sc, CHNCTL_SW_FLOW, 0);
CZTTY_CHAN_WRITE(sc, CHNCTL_FLOW_XON, 0x11);
CZTTY_CHAN_WRITE(sc, CHNCTL_FLOW_XOFF, 0x13);
CZTTY_CHAN_WRITE(sc, CHNCTL_COMM_BAUD, TTYDEF_SPEED);
CZTTY_CHAN_WRITE(sc, CHNCTL_COMM_PARITY, C_PR_NONE);
CZTTY_CHAN_WRITE(sc, CHNCTL_COMM_DATA_L, C_DL_CS8 | C_DL_1STOP);
CZTTY_CHAN_WRITE(sc, CHNCTL_COMM_FLAGS, 0);
CZTTY_CHAN_WRITE(sc, CHNCTL_HW_FLOW, C_RS_CTS | C_RS_RTS);
CZTTY_CHAN_WRITE(sc, CHNCTL_RS_CONTROL, 0);
}
}
/*
* cz_reset_board:
*
* Reset the board via the PLX.
*/
void
cz_reset_board(struct cz_softc *cz)
{
u_int32_t reg;
reg = CZ_PLX_READ(cz, PLX_CONTROL);
CZ_PLX_WRITE(cz, PLX_CONTROL, reg | CONTROL_SWR);
delay(1000);
CZ_PLX_WRITE(cz, PLX_CONTROL, reg);
delay(1000);
/* Now reload the PLX from its EEPROM. */
reg = CZ_PLX_READ(cz, PLX_CONTROL);
CZ_PLX_WRITE(cz, PLX_CONTROL, reg | CONTROL_RELOADCFG);
delay(1000);
CZ_PLX_WRITE(cz, PLX_CONTROL, reg);
}
/*
* cz_load_firmware:
*
* Load the ZFIRM firmware into the board's RAM and start it
* running.
*/
int
cz_load_firmware(struct cz_softc *cz)
{
struct zfirm_header *zfh;
struct zfirm_config *zfc;
struct zfirm_block *zfb, *zblocks;
const u_int8_t *cp;
const char *board;
u_int32_t fid;
int i, j, nconfigs, nblocks, nbytes;
zfh = (struct zfirm_header *) cycladesz_firmware;
/* Find the config header. */
if (le32toh(zfh->zfh_configoff) & (sizeof(u_int32_t) - 1)) {
aprint_error("%s: bad ZFIRM config offset: 0x%x\n",
cz->cz_dev.dv_xname, le32toh(zfh->zfh_configoff));
return (EIO);
}
zfc = (struct zfirm_config *)(cycladesz_firmware +
le32toh(zfh->zfh_configoff));
nconfigs = le32toh(zfh->zfh_nconfig);
/* Locate the correct configuration for our board. */
for (i = 0; i < nconfigs; i++, zfc++) {
if (le32toh(zfc->zfc_mailbox) == cz->cz_mailbox0 &&
le32toh(zfc->zfc_function) == ZFC_FUNCTION_NORMAL)
break;
}
if (i == nconfigs) {
aprint_error("%s: unable to locate config header\n",
cz->cz_dev.dv_xname);
return (EIO);
}
nblocks = le32toh(zfc->zfc_nblocks);
zblocks = (struct zfirm_block *)(cycladesz_firmware +
le32toh(zfh->zfh_blockoff));
/*
* 8Zo ver. 1 doesn't have an FPGA. Load it on all others if
* necessary.
*/
if (cz->cz_mailbox0 != MAILBOX0_8Zo_V1
#if 0
&& ((CZ_PLX_READ(cz, PLX_CONTROL) & CONTROL_FPGA_LOADED) == 0)
#endif
) {
#ifdef CZ_DEBUG
aprint_debug("%s: Loading FPGA...", cz->cz_dev.dv_xname);
#endif
CZ_WIN_FPGA(cz);
for (i = 0; i < nblocks; i++) {
/* zfb = zblocks + le32toh(zfc->zfc_blocklist[i]) ?? */
zfb = &zblocks[le32toh(zfc->zfc_blocklist[i])];
if (le32toh(zfb->zfb_type) == ZFB_TYPE_FPGA) {
nbytes = le32toh(zfb->zfb_size);
cp = &cycladesz_firmware[
le32toh(zfb->zfb_fileoff)];
for (j = 0; j < nbytes; j++, cp++) {
bus_space_write_1(cz->cz_win_st,
cz->cz_win_sh, 0, *cp);
/* FPGA needs 30-100us to settle. */
delay(10);
}
}
}
#ifdef CZ_DEBUG
aprint_debug("done\n");
#endif
}
/* Now load the firmware. */
CZ_WIN_RAM(cz);
for (i = 0; i < nblocks; i++) {
/* zfb = zblocks + le32toh(zfc->zfc_blocklist[i]) ?? */
zfb = &zblocks[le32toh(zfc->zfc_blocklist[i])];
if (le32toh(zfb->zfb_type) == ZFB_TYPE_FIRMWARE) {
const u_int32_t *lp;
u_int32_t ro = le32toh(zfb->zfb_ramoff);
nbytes = le32toh(zfb->zfb_size);
lp = (const u_int32_t *)
&cycladesz_firmware[le32toh(zfb->zfb_fileoff)];
for (j = 0; j < nbytes; j += 4, lp++) {
bus_space_write_4(cz->cz_win_st, cz->cz_win_sh,
ro + j, le32toh(*lp));
delay(10);
}
}
}
/* Now restart the MIPS. */
CZ_WIN_FPGA(cz);
CZ_FPGA_WRITE(cz, FPGA_CPU_START, 0);
/* Wait for the MIPS to start, then report the results. */
CZ_WIN_RAM(cz);
#ifdef CZ_DEBUG
aprint_debug("%s: waiting for MIPS to start", cz->cz_dev.dv_xname);
#endif
for (i = 0; i < 100; i++) {
fid = bus_space_read_4(cz->cz_win_st, cz->cz_win_sh,
ZFIRM_SIG_OFF);
if (fid == ZFIRM_SIG) {
/* MIPS has booted. */
break;
} else if (fid == ZFIRM_HLT) {
/*
* The MIPS has halted, usually due to a power
* shortage on the expansion module.
*/
aprint_error("%s: MIPS halted; possible power supply "
"problem\n", cz->cz_dev.dv_xname);
return (EIO);
} else {
#ifdef CZ_DEBUG
if ((i % 8) == 0)
aprint_debug(".");
#endif
delay(250000);
}
}
#ifdef CZ_DEBUG
aprint_debug("\n");
#endif
if (i == 100) {
CZ_WIN_FPGA(cz);
aprint_error(
"%s: MIPS failed to start; wanted 0x%08x got 0x%08x\n",
cz->cz_dev.dv_xname, ZFIRM_SIG, fid);
aprint_error("%s: FPGA ID 0x%08x, FPGA version 0x%08x\n",
cz->cz_dev.dv_xname, CZ_FPGA_READ(cz, FPGA_ID),
CZ_FPGA_READ(cz, FPGA_VERSION));
return (EIO);
}
/*
* Locate the firmware control structures.
*/
cz->cz_fwctl = bus_space_read_4(cz->cz_win_st, cz->cz_win_sh,
ZFIRM_CTRLADDR_OFF);
#ifdef CZ_DEBUG
aprint_debug("%s: FWCTL structure at offset 0x%08lx\n",
cz->cz_dev.dv_xname, cz->cz_fwctl);
#endif
CZ_FWCTL_WRITE(cz, BRDCTL_C_OS, C_OS_BSD);
CZ_FWCTL_WRITE(cz, BRDCTL_DRVERSION, CZ_DRIVER_VERSION);
cz->cz_nchannels = CZ_FWCTL_READ(cz, BRDCTL_NCHANNEL);
switch (cz->cz_mailbox0) {
case MAILBOX0_8Zo_V1:
board = "Cyclades-8Zo ver. 1";
break;
case MAILBOX0_8Zo_V2:
board = "Cyclades-8Zo ver. 2";
break;
case MAILBOX0_Ze_V1:
board = "Cyclades-Ze";
break;
default:
board = "unknown Cyclades Z-series";
break;
}
fid = CZ_FWCTL_READ(cz, BRDCTL_FWVERSION);
aprint_normal("%s: %s, ", cz->cz_dev.dv_xname, board);
if (cz->cz_nchannels == 0)
aprint_normal("no channels attached, ");
else
aprint_normal("%d channels (ttyCZ%04d..ttyCZ%04d), ",
cz->cz_nchannels, cztty_attached_ttys,
cztty_attached_ttys + (cz->cz_nchannels - 1));
aprint_normal("firmware %x.%x.%x\n",
(fid >> 8) & 0xf, (fid >> 4) & 0xf, fid & 0xf);
return (0);
}
/*
* cz_poll:
*
* This card doesn't do interrupts, so scan it for activity every CZ_POLL_MS
* ms.
*/
void
cz_poll(void *arg)
{
int s = spltty();
struct cz_softc *cz = arg;
cz_intr(cz);
callout_reset(&cz->cz_callout, cz_timeout_ticks, cz_poll, cz);
splx(s);
}
/*
* cz_intr:
*
* Interrupt service routine.
*
* We either are receiving an interrupt directly from the board, or we are
* in polling mode and it's time to poll.
*/
int
cz_intr(void *arg)
{
int rval = 0;
u_int command, channel, param;
struct cz_softc *cz = arg;
struct cztty_softc *sc;
struct tty *tp;
while ((command = (CZ_PLX_READ(cz, PLX_LOCAL_PCI_DOORBELL) & 0xff))) {
rval = 1;
channel = CZ_FWCTL_READ(cz, BRDCTL_FWCMD_CHANNEL);
param = CZ_FWCTL_READ(cz, BRDCTL_FWCMD_PARAM);
/* now clear this interrupt, posslibly enabling another */
CZ_PLX_WRITE(cz, PLX_LOCAL_PCI_DOORBELL, command);
if (cz->cz_ports == NULL) {
#ifdef CZ_DEBUG
printf("%s: interrupt on channel %d, but no channels\n",
cz->cz_dev.dv_xname, channel);
#endif
continue;
}
sc = &cz->cz_ports[channel];
if (sc->sc_channel == CZTTY_CHANNEL_DEAD)
break;
tp = sc->sc_tty;
switch (command) {
case C_CM_TXFEMPTY: /* transmit cases */
case C_CM_TXBEMPTY:
case C_CM_TXLOWWM:
case C_CM_INTBACK:
if (!ISSET(tp->t_state, TS_ISOPEN)) {
#ifdef CZ_DEBUG
printf("%s: tx intr on closed channel %d\n",
cz->cz_dev.dv_xname, channel);
#endif
break;
}
if (cztty_transmit(sc, tp)) {
/*
* Do wakeup stuff here.
*/
ttwakeup(tp);
wakeup(tp);
}
break;
case C_CM_RXNNDT: /* receive cases */
case C_CM_RXHIWM:
case C_CM_INTBACK2: /* from restart ?? */
#if 0
case C_CM_ICHAR:
#endif
if (!ISSET(tp->t_state, TS_ISOPEN)) {
CZTTY_BUF_WRITE(sc, BUFCTL_RX_GET,
CZTTY_BUF_READ(sc, BUFCTL_RX_PUT));
break;
}
if (cztty_receive(sc, tp)) {
/*
* Do wakeup stuff here.
*/
ttwakeup(tp);
wakeup(tp);
}
break;
case C_CM_MDCD:
if (!ISSET(tp->t_state, TS_ISOPEN))
break;
(void) (*tp->t_linesw->l_modem)(tp,
ISSET(C_RS_DCD, CZTTY_CHAN_READ(sc,
CHNCTL_RS_STATUS)));
break;
case C_CM_MDSR:
case C_CM_MRI:
case C_CM_MCTS:
case C_CM_MRTS:
break;
case C_CM_IOCTLW:
break;
case C_CM_PR_ERROR:
sc->sc_parity_errors++;
goto error_common;
case C_CM_FR_ERROR:
sc->sc_framing_errors++;
goto error_common;
case C_CM_OVR_ERROR:
sc->sc_overflows++;
error_common:
if (sc->sc_errors++ == 0)
callout_reset(&sc->sc_diag_ch, 60 * hz,
cztty_diag, sc);
break;
case C_CM_RXBRK:
if (!ISSET(tp->t_state, TS_ISOPEN))
break;
/*
* A break is a \000 character with TTY_FE error
* flags set. So TTY_FE by itself works.
*/
(*tp->t_linesw->l_rint)(TTY_FE, tp);
ttwakeup(tp);
wakeup(tp);
break;
default:
#ifdef CZ_DEBUG
printf("%s: channel %d: Unknown interrupt 0x%x\n",
cz->cz_dev.dv_xname, sc->sc_channel, command);
#endif
break;
}
}
return (rval);
}
/*
* cz_wait_pci_doorbell:
*
* Wait for the pci doorbell to be clear - wait for pending
* activity to drain.
*/
int
cz_wait_pci_doorbell(struct cz_softc *cz, const char *wstring)
{
int error;
while (CZ_PLX_READ(cz, PLX_PCI_LOCAL_DOORBELL)) {
error = tsleep(cz, TTIPRI | PCATCH, wstring, max(1, hz/100));
if ((error != 0) && (error != EWOULDBLOCK))
return (error);
}
return (0);
}
/*****************************************************************************
* Cyclades-Z TTY code starts here...
*****************************************************************************/
#define CZTTYDIALOUT_MASK 0x80000
#define CZTTY_DIALOUT(dev) (minor((dev)) & CZTTYDIALOUT_MASK)
#define CZTTY_CZ(sc) ((sc)->sc_parent)
#define CZTTY_SOFTC(dev) cztty_getttysoftc(dev)
struct cztty_softc *
cztty_getttysoftc(dev_t dev)
{
int i, j, k, u = minor(dev) & ~CZTTYDIALOUT_MASK;
struct cz_softc *cz;
for (i = 0, j = 0; i < cz_cd.cd_ndevs; i++) {
k = j;
cz = device_lookup(&cz_cd, i);
if (cz == NULL)
continue;
if (cz->cz_ports == NULL)
continue;
j += cz->cz_nchannels;
if (j > u)
break;
}
if (i >= cz_cd.cd_ndevs)
return (NULL);
else
return (&cz->cz_ports[u - k]);
}
/*
* czttytty:
*
* Return a pointer to our tty.
*/
struct tty *
czttytty(dev_t dev)
{
struct cztty_softc *sc = CZTTY_SOFTC(dev);
#ifdef DIAGNOSTIC
if (sc == NULL)
panic("czttytty");
#endif
return (sc->sc_tty);
}
/*
* cztty_shutdown:
*
* Shut down a port.
*/
void
cztty_shutdown(struct cztty_softc *sc)
{
struct cz_softc *cz = CZTTY_CZ(sc);
struct tty *tp = sc->sc_tty;
int s;
s = spltty();
/* Clear any break condition set with TIOCSBRK. */
cztty_break(sc, 0);
/*
* Hang up if necessary. Wait a bit, so the other side has time to
* notice even if we immediately open the port again.
*/
if (ISSET(tp->t_cflag, HUPCL)) {
cztty_modem(sc, 0);
(void) tsleep(tp, TTIPRI, ttclos, hz);
}
/* Disable the channel. */
cz_wait_pci_doorbell(cz, "czdis");
CZTTY_CHAN_WRITE(sc, CHNCTL_OP_MODE, C_CH_DISABLE);
CZ_FWCTL_WRITE(cz, BRDCTL_HCMD_CHANNEL, sc->sc_channel);
CZ_PLX_WRITE(cz, PLX_PCI_LOCAL_DOORBELL, C_CM_IOCTL);
if ((--cz->cz_nopenchan == 0) && (cz->cz_ih == NULL)) {
#ifdef CZ_DEBUG
printf("%s: Disabling polling\n", cz->cz_dev.dv_xname);
#endif
callout_stop(&cz->cz_callout);
}
splx(s);
}
/*
* czttyopen:
*
* Open a Cyclades-Z serial port.
*/
int
czttyopen(dev_t dev, int flags, int mode, struct proc *p)
{
struct cztty_softc *sc = CZTTY_SOFTC(dev);
struct cz_softc *cz;
struct tty *tp;
int s, error;
if (sc == NULL)
return (ENXIO);
if (sc->sc_channel == CZTTY_CHANNEL_DEAD)
return (ENXIO);
cz = CZTTY_CZ(sc);
tp = sc->sc_tty;
if (ISSET(tp->t_state, TS_ISOPEN) &&
ISSET(tp->t_state, TS_XCLUDE) &&
p->p_ucred->cr_uid != 0)
return (EBUSY);
s = spltty();
/*
* Do the following iff this is a first open.
*/
if (!ISSET(tp->t_state, TS_ISOPEN) && (tp->t_wopen == 0)) {
struct termios t;
tp->t_dev = dev;
/* If we're turning things on, enable interrupts */
if ((cz->cz_nopenchan++ == 0) && (cz->cz_ih == NULL)) {
#ifdef CZ_DEBUG
printf("%s: Enabling polling.\n",
cz->cz_dev.dv_xname);
#endif
callout_reset(&cz->cz_callout, cz_timeout_ticks,
cz_poll, cz);
}
/*
* Enable the channel. Don't actually ring the
* doorbell here; czttyparam() will do it for us.
*/
cz_wait_pci_doorbell(cz, "czopen");
CZTTY_CHAN_WRITE(sc, CHNCTL_OP_MODE, C_CH_ENABLE);
/*
* Initialize the termios status to the defaults. Add in the
* sticky bits from TIOCSFLAGS.
*/
t.c_ispeed = 0;
t.c_ospeed = TTYDEF_SPEED;
t.c_cflag = TTYDEF_CFLAG;
if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL))
SET(t.c_cflag, CLOCAL);
if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS))
SET(t.c_cflag, CRTSCTS);
/*
* Reset the input and output rings. Do this before
* we call czttyparam(), as that function enables
* the channel.
*/
CZTTY_BUF_WRITE(sc, BUFCTL_RX_GET,
CZTTY_BUF_READ(sc, BUFCTL_RX_PUT));
CZTTY_BUF_WRITE(sc, BUFCTL_TX_PUT,
CZTTY_BUF_READ(sc, BUFCTL_TX_GET));
/* Make sure czttyparam() will see changes. */
tp->t_ospeed = 0;
(void) czttyparam(tp, &t);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_lflag = TTYDEF_LFLAG;
ttychars(tp);
ttsetwater(tp);
/*
* Turn on DTR. We must always do this, even if carrier is not
* present, because otherwise we'd have to use TIOCSDTR
* immediately after setting CLOCAL, which applications do not
* expect. We always assert DTR while the device is open
* unless explicitly requested to deassert it.
*/
cztty_modem(sc, 1);
}
splx(s);
error = ttyopen(tp, CZTTY_DIALOUT(dev), ISSET(flags, O_NONBLOCK));
if (error)
goto bad;
error = (*tp->t_linesw->l_open)(dev, tp);
if (error)
goto bad;
return (0);
bad:
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
/*
* We failed to open the device, and nobody else had it opened.
* Clean up the state as appropriate.
*/
cztty_shutdown(sc);
}
return (error);
}
/*
* czttyclose:
*
* Close a Cyclades-Z serial port.
*/
int
czttyclose(dev_t dev, int flags, int mode, struct proc *p)
{
struct cztty_softc *sc = CZTTY_SOFTC(dev);
struct tty *tp = sc->sc_tty;
/* XXX This is for cons.c. */
if (!ISSET(tp->t_state, TS_ISOPEN))
return (0);
(*tp->t_linesw->l_close)(tp, flags);
ttyclose(tp);
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
/*
* Although we got a last close, the device may still be in
* use; e.g. if this was the dialout node, and there are still
* processes waiting for carrier on the non-dialout node.
*/
cztty_shutdown(sc);
}
return (0);
}
/*
* czttyread:
*
* Read from a Cyclades-Z serial port.
*/
int
czttyread(dev_t dev, struct uio *uio, int flags)
{
struct cztty_softc *sc = CZTTY_SOFTC(dev);
struct tty *tp = sc->sc_tty;
return ((*tp->t_linesw->l_read)(tp, uio, flags));
}
/*
* czttywrite:
*
* Write to a Cyclades-Z serial port.
*/
int
czttywrite(dev_t dev, struct uio *uio, int flags)
{
struct cztty_softc *sc = CZTTY_SOFTC(dev);
struct tty *tp = sc->sc_tty;
return ((*tp->t_linesw->l_write)(tp, uio, flags));
}
/*
* czttypoll:
*
* Poll a Cyclades-Z serial port.
*/
int
czttypoll(dev, events, p)
dev_t dev;
int events;
struct proc *p;
{
struct cztty_softc *sc = CZTTY_SOFTC(dev);
struct tty *tp = sc->sc_tty;
return ((*tp->t_linesw->l_poll)(tp, events, p));
}
/*
* czttyioctl:
*
* Perform a control operation on a Cyclades-Z serial port.
*/
int
czttyioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p)
{
struct cztty_softc *sc = CZTTY_SOFTC(dev);
struct tty *tp = sc->sc_tty;
int s, error;
error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, p);
if (error != EPASSTHROUGH)
return (error);
error = ttioctl(tp, cmd, data, flag, p);
if (error != EPASSTHROUGH)
return (error);
error = 0;
s = spltty();
switch (cmd) {
case TIOCSBRK:
cztty_break(sc, 1);
break;
case TIOCCBRK:
cztty_break(sc, 0);
break;
case TIOCGFLAGS:
*(int *)data = sc->sc_swflags;
break;
case TIOCSFLAGS:
error = suser(p->p_ucred, &p->p_acflag);
if (error)
break;
sc->sc_swflags = *(int *)data;
break;
case TIOCSDTR:
cztty_modem(sc, 1);
break;
case TIOCCDTR:
cztty_modem(sc, 0);
break;
case TIOCMSET:
case TIOCMBIS:
case TIOCMBIC:
tiocm_to_cztty(sc, cmd, *(int *)data);
break;
case TIOCMGET:
*(int *)data = cztty_to_tiocm(sc);
break;
default:
error = EPASSTHROUGH;
break;
}
splx(s);
return (error);
}
/*
* cztty_break:
*
* Set or clear BREAK on a port.
*/
void
cztty_break(struct cztty_softc *sc, int onoff)
{
struct cz_softc *cz = CZTTY_CZ(sc);
cz_wait_pci_doorbell(cz, "czbreak");
CZ_FWCTL_WRITE(cz, BRDCTL_HCMD_CHANNEL, sc->sc_channel);
CZ_PLX_WRITE(cz, PLX_PCI_LOCAL_DOORBELL,
onoff ? C_CM_SET_BREAK : C_CM_CLR_BREAK);
}
/*
* cztty_modem:
*
* Set or clear DTR on a port.
*/
void
cztty_modem(struct cztty_softc *sc, int onoff)
{
struct cz_softc *cz = CZTTY_CZ(sc);
if (sc->sc_rs_control_dtr == 0)
return;
cz_wait_pci_doorbell(cz, "czmod");
if (onoff)
sc->sc_chanctl_rs_control |= sc->sc_rs_control_dtr;
else
sc->sc_chanctl_rs_control &= ~sc->sc_rs_control_dtr;
CZTTY_CHAN_WRITE(sc, CHNCTL_RS_CONTROL, sc->sc_chanctl_rs_control);
CZ_FWCTL_WRITE(cz, BRDCTL_HCMD_CHANNEL, sc->sc_channel);
CZ_PLX_WRITE(cz, PLX_PCI_LOCAL_DOORBELL, C_CM_IOCTLM);
}
/*
* tiocm_to_cztty:
*
* Process TIOCM* ioctls.
*/
void
tiocm_to_cztty(struct cztty_softc *sc, u_long how, int ttybits)
{
struct cz_softc *cz = CZTTY_CZ(sc);
u_int32_t czttybits;
czttybits = 0;
if (ISSET(ttybits, TIOCM_DTR))
SET(czttybits, C_RS_DTR);
if (ISSET(ttybits, TIOCM_RTS))
SET(czttybits, C_RS_RTS);
cz_wait_pci_doorbell(cz, "cztiocm");
switch (how) {
case TIOCMBIC:
CLR(sc->sc_chanctl_rs_control, czttybits);
break;
case TIOCMBIS:
SET(sc->sc_chanctl_rs_control, czttybits);
break;
case TIOCMSET:
CLR(sc->sc_chanctl_rs_control, C_RS_DTR | C_RS_RTS);
SET(sc->sc_chanctl_rs_control, czttybits);
break;
}
CZTTY_CHAN_WRITE(sc, CHNCTL_RS_CONTROL, sc->sc_chanctl_rs_control);
CZ_FWCTL_WRITE(cz, BRDCTL_HCMD_CHANNEL, sc->sc_channel);
CZ_PLX_WRITE(cz, PLX_PCI_LOCAL_DOORBELL, C_CM_IOCTLM);
}
/*
* cztty_to_tiocm:
*
* Process the TIOCMGET ioctl.
*/
int
cztty_to_tiocm(struct cztty_softc *sc)
{
struct cz_softc *cz = CZTTY_CZ(sc);
u_int32_t rs_status, op_mode;
int ttybits = 0;
cz_wait_pci_doorbell(cz, "cztty");
rs_status = CZTTY_CHAN_READ(sc, CHNCTL_RS_STATUS);
op_mode = CZTTY_CHAN_READ(sc, CHNCTL_OP_MODE);
if (ISSET(rs_status, C_RS_RTS))
SET(ttybits, TIOCM_RTS);
if (ISSET(rs_status, C_RS_CTS))
SET(ttybits, TIOCM_CTS);
if (ISSET(rs_status, C_RS_DCD))
SET(ttybits, TIOCM_CAR);
if (ISSET(rs_status, C_RS_DTR))
SET(ttybits, TIOCM_DTR);
if (ISSET(rs_status, C_RS_RI))
SET(ttybits, TIOCM_RNG);
if (ISSET(rs_status, C_RS_DSR))
SET(ttybits, TIOCM_DSR);
if (ISSET(op_mode, C_CH_ENABLE))
SET(ttybits, TIOCM_LE);
return (ttybits);
}
/*
* czttyparam:
*
* Set Cyclades-Z serial port parameters from termios.
*
* XXX Should just copy the whole termios after making
* XXX sure all the changes could be done.
*/
int
czttyparam(struct tty *tp, struct termios *t)
{
struct cztty_softc *sc = CZTTY_SOFTC(tp->t_dev);
struct cz_softc *cz = CZTTY_CZ(sc);
u_int32_t rs_status;
int ospeed, cflag;
ospeed = t->c_ospeed;
cflag = t->c_cflag;
/* Check requested parameters. */
if (ospeed < 0)
return (EINVAL);
if (t->c_ispeed && t->c_ispeed != ospeed)
return (EINVAL);
if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR)) {
SET(cflag, CLOCAL);
CLR(cflag, HUPCL);
}
/*
* If there were no changes, don't do anything. This avoids dropping
* input and improves performance when all we did was frob things like
* VMIN and VTIME.
*/
if (tp->t_ospeed == ospeed &&
tp->t_cflag == cflag)
return (0);
/* Data bits. */
sc->sc_chanctl_comm_data_l = 0;
switch (t->c_cflag & CSIZE) {
case CS5:
sc->sc_chanctl_comm_data_l |= C_DL_CS5;
break;
case CS6:
sc->sc_chanctl_comm_data_l |= C_DL_CS6;
break;
case CS7:
sc->sc_chanctl_comm_data_l |= C_DL_CS7;
break;
case CS8:
sc->sc_chanctl_comm_data_l |= C_DL_CS8;
break;
}
/* Stop bits. */
if (t->c_cflag & CSTOPB) {
if ((sc->sc_chanctl_comm_data_l & C_DL_CS) == C_DL_CS5)
sc->sc_chanctl_comm_data_l |= C_DL_15STOP;
else
sc->sc_chanctl_comm_data_l |= C_DL_2STOP;
} else
sc->sc_chanctl_comm_data_l |= C_DL_1STOP;
/* Parity. */
if (t->c_cflag & PARENB) {
if (t->c_cflag & PARODD)
sc->sc_chanctl_comm_parity = C_PR_ODD;
else
sc->sc_chanctl_comm_parity = C_PR_EVEN;
} else
sc->sc_chanctl_comm_parity = C_PR_NONE;
/*
* Initialize flow control pins depending on the current flow control
* mode.
*/
if (ISSET(t->c_cflag, CRTSCTS)) {
sc->sc_rs_control_dtr = C_RS_DTR;
sc->sc_chanctl_hw_flow = C_RS_CTS | C_RS_RTS;
} else if (ISSET(t->c_cflag, MDMBUF)) {
sc->sc_rs_control_dtr = 0;
sc->sc_chanctl_hw_flow = C_RS_DCD | C_RS_DTR;
} else {
/*
* If no flow control, then always set RTS. This will make
* the other side happy if it mistakenly thinks we're doing
* RTS/CTS flow control.
*/
sc->sc_rs_control_dtr = C_RS_DTR | C_RS_RTS;
sc->sc_chanctl_hw_flow = 0;
if (ISSET(sc->sc_chanctl_rs_control, C_RS_DTR))
SET(sc->sc_chanctl_rs_control, C_RS_RTS);
else
CLR(sc->sc_chanctl_rs_control, C_RS_RTS);
}
/* Baud rate. */
sc->sc_chanctl_comm_baud = ospeed;
/* Copy to tty. */
tp->t_ispeed = 0;
tp->t_ospeed = t->c_ospeed;
tp->t_cflag = t->c_cflag;
/*
* Now load the channel control structure.
*/
cz_wait_pci_doorbell(cz, "czparam");
CZTTY_CHAN_WRITE(sc, CHNCTL_COMM_BAUD, sc->sc_chanctl_comm_baud);
CZTTY_CHAN_WRITE(sc, CHNCTL_COMM_DATA_L, sc->sc_chanctl_comm_data_l);
CZTTY_CHAN_WRITE(sc, CHNCTL_COMM_PARITY, sc->sc_chanctl_comm_parity);
CZTTY_CHAN_WRITE(sc, CHNCTL_HW_FLOW, sc->sc_chanctl_hw_flow);
CZTTY_CHAN_WRITE(sc, CHNCTL_RS_CONTROL, sc->sc_chanctl_rs_control);
CZ_FWCTL_WRITE(cz, BRDCTL_HCMD_CHANNEL, sc->sc_channel);
CZ_PLX_WRITE(cz, PLX_PCI_LOCAL_DOORBELL, C_CM_IOCTLW);
cz_wait_pci_doorbell(cz, "czparam");
CZ_FWCTL_WRITE(cz, BRDCTL_HCMD_CHANNEL, sc->sc_channel);
CZ_PLX_WRITE(cz, PLX_PCI_LOCAL_DOORBELL, C_CM_IOCTLM);
cz_wait_pci_doorbell(cz, "czparam");
/*
* Update the tty layer's idea of the carrier bit, in case we changed
* CLOCAL. We don't hang up here; we only do that by explicit
* request.
*/
rs_status = CZTTY_CHAN_READ(sc, CHNCTL_RS_STATUS);
(void) (*tp->t_linesw->l_modem)(tp, ISSET(rs_status, C_RS_DCD));
return (0);
}
/*
* czttystart:
*
* Start or restart transmission.
*/
void
czttystart(struct tty *tp)
{
struct cztty_softc *sc = CZTTY_SOFTC(tp->t_dev);
int s;
s = spltty();
if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP))
goto out;
if (tp->t_outq.c_cc <= tp->t_lowat) {
if (ISSET(tp->t_state, TS_ASLEEP)) {
CLR(tp->t_state, TS_ASLEEP);
wakeup(&tp->t_outq);
}
selwakeup(&tp->t_wsel);
if (tp->t_outq.c_cc == 0)
goto out;
}
cztty_transmit(sc, tp);
out:
splx(s);
}
/*
* czttystop:
*
* Stop output, e.g., for ^S or output flush.
*/
void
czttystop(struct tty *tp, int flag)
{
/*
* XXX We don't do anything here, yet. Mostly, I don't know
* XXX exactly how this should be implemented on this device.
* XXX We've given a big chunk of data to the MIPS already,
* XXX and I don't know how we request the MIPS to stop sending
* XXX the data. So, punt for now. --thorpej
*/
}
/*
* cztty_diag:
*
* Issue a scheduled diagnostic message.
*/
void
cztty_diag(void *arg)
{
struct cztty_softc *sc = arg;
struct cz_softc *cz = CZTTY_CZ(sc);
u_int overflows, parity_errors, framing_errors;
int s;
s = spltty();
overflows = sc->sc_overflows;
sc->sc_overflows = 0;
parity_errors = sc->sc_parity_errors;
sc->sc_parity_errors = 0;
framing_errors = sc->sc_framing_errors;
sc->sc_framing_errors = 0;
sc->sc_errors = 0;
splx(s);
log(LOG_WARNING,
"%s: channel %d: %u overflow%s, %u parity, %u framing error%s\n",
cz->cz_dev.dv_xname, sc->sc_channel,
overflows, overflows == 1 ? "" : "s",
parity_errors,
framing_errors, framing_errors == 1 ? "" : "s");
}
/*
* tx and rx ring buffer size macros:
*
* The transmitter and receiver both use ring buffers. For each one, there
* is a get (consumer) and a put (producer) offset. The get value is the
* next byte to be read from the ring, and the put is the next one to be
* put into the ring. get == put means the ring is empty.
*
* For each ring, the firmware controls one of (get, put) and this driver
* controls the other. For transmission, this driver updates put to point
* past the valid data, and the firmware moves get as bytes are sent. Likewise
* for receive, the driver controls put, and this driver controls get.
*/
#define TX_MOVEABLE(g, p, s) (((g) > (p)) ? ((g) - (p) - 1) : ((s) - (p)))
#define RX_MOVEABLE(g, p, s) (((g) > (p)) ? ((s) - (g)) : ((p) - (g)))
/*
* cztty_transmit()
*
* Look at the tty for this port and start sending.
*/
int
cztty_transmit(struct cztty_softc *sc, struct tty *tp)
{
struct cz_softc *cz = CZTTY_CZ(sc);
u_int move, get, put, size, address;
#ifdef HOSTRAMCODE
int error, done = 0;
#else
int done = 0;
#endif
size = CZTTY_BUF_READ(sc, BUFCTL_TX_BUFSIZE);
get = CZTTY_BUF_READ(sc, BUFCTL_TX_GET);
put = CZTTY_BUF_READ(sc, BUFCTL_TX_PUT);
address = CZTTY_BUF_READ(sc, BUFCTL_TX_BUFADDR);
while ((tp->t_outq.c_cc > 0) && ((move = TX_MOVEABLE(get, put, size)))){
#ifdef HOSTRAMCODE
if (0) {
move = min(tp->t_outq.c_cc, move);
error = q_to_b(&tp->t_outq, 0, move);
if (error != move) {
printf("%s: channel %d: error moving to "
"transmit buf\n", cz->cz_dev.dv_xname,
sc->sc_channel);
move = error;
}
} else {
#endif
move = min(ndqb(&tp->t_outq, 0), move);
bus_space_write_region_1(cz->cz_win_st, cz->cz_win_sh,
address + put, tp->t_outq.c_cf, move);
ndflush(&tp->t_outq, move);
#ifdef HOSTRAMCODE
}
#endif
put = ((put + move) % size);
done = 1;
}
if (done) {
CZTTY_BUF_WRITE(sc, BUFCTL_TX_PUT, put);
}
return (done);
}
int
cztty_receive(struct cztty_softc *sc, struct tty *tp)
{
struct cz_softc *cz = CZTTY_CZ(sc);
u_int get, put, size, address;
int done = 0, ch;
size = CZTTY_BUF_READ(sc, BUFCTL_RX_BUFSIZE);
get = CZTTY_BUF_READ(sc, BUFCTL_RX_GET);
put = CZTTY_BUF_READ(sc, BUFCTL_RX_PUT);
address = CZTTY_BUF_READ(sc, BUFCTL_RX_BUFADDR);
while ((get != put) && ((tp->t_canq.c_cc + tp->t_rawq.c_cc) < tp->t_hiwat)) {
#ifdef HOSTRAMCODE
if (hostram)
ch = ((char *)fifoaddr)[get];
} else {
#endif
ch = bus_space_read_1(cz->cz_win_st, cz->cz_win_sh,
address + get);
#ifdef HOSTRAMCODE
}
#endif
(*tp->t_linesw->l_rint)(ch, tp);
get = (get + 1) % size;
done = 1;
}
if (done) {
CZTTY_BUF_WRITE(sc, BUFCTL_RX_GET, get);
}
return (done);
}
Reference in New Issue View Git Blame Copy Permalink