932 lines
23 KiB
C
932 lines
23 KiB
C
/* $NetBSD: if_we.c,v 1.7 1998/04/07 16:23:19 drochner Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
|
* NASA Ames Research Center.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Device driver for National Semiconductor DS8390/WD83C690 based ethernet
|
|
* adapters.
|
|
*
|
|
* Copyright (c) 1994, 1995 Charles M. Hannum. All rights reserved.
|
|
*
|
|
* Copyright (C) 1993, David Greenman. This software may be used, modified,
|
|
* copied, distributed, and sold, in both source and binary form provided that
|
|
* the above copyright and these terms are retained. Under no circumstances is
|
|
* the author responsible for the proper functioning of this software, nor does
|
|
* the author assume any responsibility for damages incurred with its use.
|
|
*/
|
|
|
|
/*
|
|
* Device driver for the Western Digital/SMC 8003 and 8013 series,
|
|
* and the SMC Elite Ultra (8216).
|
|
*/
|
|
|
|
#include "bpfilter.h"
|
|
#include "rnd.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/device.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/syslog.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/if_ether.h>
|
|
|
|
#ifdef INET
|
|
#include <netinet/in.h>
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in_var.h>
|
|
#include <netinet/ip.h>
|
|
#include <netinet/if_inarp.h>
|
|
#endif
|
|
|
|
#ifdef NS
|
|
#include <netns/ns.h>
|
|
#include <netns/ns_if.h>
|
|
#endif
|
|
|
|
#if NBPFILTER > 0
|
|
#include <net/bpf.h>
|
|
#include <net/bpfdesc.h>
|
|
#endif
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/intr.h>
|
|
|
|
#include <dev/isa/isareg.h>
|
|
#include <dev/isa/isavar.h>
|
|
|
|
#include <dev/ic/dp8390reg.h>
|
|
#include <dev/ic/dp8390var.h>
|
|
|
|
#include <dev/isa/if_wereg.h>
|
|
|
|
struct we_softc {
|
|
struct dp8390_softc sc_dp8390;
|
|
|
|
bus_space_tag_t sc_asict; /* space tag for ASIC */
|
|
bus_space_handle_t sc_asich; /* space handle for ASIC */
|
|
|
|
u_int8_t sc_laar_proto;
|
|
u_int8_t sc_msr_proto;
|
|
|
|
u_int8_t sc_type; /* our type */
|
|
|
|
int sc_16bitp; /* are we 16 bit? */
|
|
|
|
void *sc_ih; /* interrupt handle */
|
|
};
|
|
|
|
int we_probe __P((struct device *, struct cfdata *, void *));
|
|
void we_attach __P((struct device *, struct device *, void *));
|
|
|
|
struct cfattach we_ca = {
|
|
sizeof(struct we_softc), we_probe, we_attach
|
|
};
|
|
|
|
extern struct cfdriver we_cd;
|
|
|
|
const char *we_params __P((bus_space_tag_t, bus_space_handle_t, u_int8_t *,
|
|
bus_size_t *, int *, int *));
|
|
void we_set_media __P((struct we_softc *, int));
|
|
|
|
int we_mediachange __P((struct dp8390_softc *));
|
|
void we_mediastatus __P((struct dp8390_softc *, struct ifmediareq *));
|
|
|
|
void we_recv_int __P((struct dp8390_softc *));
|
|
void we_init_card __P((struct dp8390_softc *));
|
|
int we_write_mbuf __P((struct dp8390_softc *, struct mbuf *, int));
|
|
int we_ring_copy __P((struct dp8390_softc *, int, caddr_t, u_short));
|
|
void we_read_hdr __P((struct dp8390_softc *, int, struct dp8390_ring *));
|
|
int we_test_mem __P((struct dp8390_softc *));
|
|
|
|
__inline void we_writemem __P((struct we_softc *, u_int8_t *, int, int));
|
|
__inline void we_readmem __P((struct we_softc *, int, u_int8_t *, int));
|
|
|
|
static const int we_584_irq[] = {
|
|
9, 3, 5, 7, 10, 11, 15, 4,
|
|
};
|
|
#define NWE_584_IRQ (sizeof(we_584_irq) / sizeof(we_584_irq[0]))
|
|
|
|
static const int we_790_irq[] = {
|
|
IRQUNK, 9, 3, 5, 7, 10, 11, 15,
|
|
};
|
|
#define NWE_790_IRQ (sizeof(we_790_irq) / sizeof(we_790_irq[0]))
|
|
|
|
int we_media[] = {
|
|
IFM_ETHER|IFM_10_2,
|
|
IFM_ETHER|IFM_10_5,
|
|
};
|
|
#define NWE_MEDIA (sizeof(we_media) / sizeof(we_media[0]))
|
|
|
|
/*
|
|
* Delay needed when switching 16-bit access to shared memory.
|
|
*/
|
|
#define WE_DELAY(wsc) delay(3)
|
|
|
|
/*
|
|
* Enable card RAM, and 16-bit access.
|
|
*/
|
|
#define WE_MEM_ENABLE(wsc) \
|
|
do { \
|
|
if ((wsc)->sc_16bitp) \
|
|
bus_space_write_1((wsc)->sc_asict, (wsc)->sc_asich, \
|
|
WE_LAAR, (wsc)->sc_laar_proto | WE_LAAR_M16EN); \
|
|
bus_space_write_1((wsc)->sc_asict, (wsc)->sc_asich, \
|
|
WE_MSR, wsc->sc_msr_proto | WE_MSR_MENB); \
|
|
WE_DELAY((wsc)); \
|
|
} while (0)
|
|
|
|
/*
|
|
* Disable card RAM, and 16-bit access.
|
|
*/
|
|
#define WE_MEM_DISABLE(wsc) \
|
|
do { \
|
|
bus_space_write_1((wsc)->sc_asict, (wsc)->sc_asich, \
|
|
WE_MSR, (wsc)->sc_msr_proto); \
|
|
if ((wsc)->sc_16bitp) \
|
|
bus_space_write_1((wsc)->sc_asict, (wsc)->sc_asich, \
|
|
WE_LAAR, (wsc)->sc_laar_proto); \
|
|
WE_DELAY((wsc)); \
|
|
} while (0)
|
|
|
|
int
|
|
we_probe(parent, cf, aux)
|
|
struct device *parent;
|
|
struct cfdata *cf;
|
|
void *aux;
|
|
{
|
|
struct isa_attach_args *ia = aux;
|
|
bus_space_tag_t asict, memt;
|
|
bus_space_handle_t asich, memh;
|
|
bus_size_t memsize;
|
|
int asich_valid, memh_valid;
|
|
int i, is790, rv = 0;
|
|
u_int8_t x, type;
|
|
|
|
asict = ia->ia_iot;
|
|
memt = ia->ia_memt;
|
|
|
|
asich_valid = memh_valid = 0;
|
|
|
|
/* Disallow wildcarded i/o addresses. */
|
|
if (ia->ia_iobase == ISACF_PORT_DEFAULT)
|
|
return (0);
|
|
|
|
/* Disallow wildcarded mem address. */
|
|
if (ia->ia_maddr == ISACF_IOMEM_DEFAULT)
|
|
return (0);
|
|
|
|
/* Attempt to map the device. */
|
|
if (bus_space_map(asict, ia->ia_iobase, WE_NPORTS, 0, &asich))
|
|
goto out;
|
|
asich_valid = 1;
|
|
|
|
#ifdef TOSH_ETHER
|
|
bus_space_write_1(asict, asich, WE_MSR, WE_MSR_POW);
|
|
#endif
|
|
|
|
/*
|
|
* Attempt to do a checksum over the station address PROM.
|
|
* If it fails, it's probably not a WD/SMC board. There is
|
|
* a problem with this, though. Some clone WD8003E boards
|
|
* (e.g. Danpex) won't pass the checksum. In this case,
|
|
* the checksum byte always seems to be 0.
|
|
*/
|
|
for (x = 0, i = 0; i < 8; i++)
|
|
x += bus_space_read_1(asict, asich, WE_PROM + i);
|
|
|
|
if (x != WE_ROM_CHECKSUM_TOTAL) {
|
|
/* Make sure it's an 8003E clone... */
|
|
if (bus_space_read_1(asict, asich, WE_CARD_ID) !=
|
|
WE_TYPE_WD8003E)
|
|
goto out;
|
|
|
|
/* Check the checksum byte. */
|
|
if (bus_space_read_1(asict, asich, WE_PROM + 7) != 0)
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Reset the card to force it into a known state.
|
|
*/
|
|
#ifdef TOSH_ETHER
|
|
bus_space_write_1(asict, asich, WE_MSR, WE_MSR_RST | WE_MSR_POW);
|
|
#else
|
|
bus_space_write_1(asict, asich, WE_MSR, WE_MSR_RST);
|
|
#endif
|
|
delay(100);
|
|
|
|
bus_space_write_1(asict, asich, WE_MSR,
|
|
bus_space_read_1(asict, asich, WE_MSR) & ~WE_MSR_RST);
|
|
|
|
/* Wait in case the card is reading it's EEPROM. */
|
|
delay(5000);
|
|
|
|
/*
|
|
* Get parameters.
|
|
*/
|
|
if (we_params(asict, asich, &type, &memsize, NULL, &is790) == NULL)
|
|
goto out;
|
|
|
|
/* Allow user to override probed value. */
|
|
if (ia->ia_msize)
|
|
memsize = ia->ia_msize;
|
|
|
|
/* Attempt to map the memory space. */
|
|
if (bus_space_map(memt, ia->ia_maddr, memsize, 0, &memh))
|
|
goto out;
|
|
memh_valid = 1;
|
|
|
|
/*
|
|
* If possible, get the assigned interrupt number from the card
|
|
* and use it.
|
|
*/
|
|
if (is790) {
|
|
u_int8_t hwr;
|
|
|
|
/* Assemble together the encoded interrupt number. */
|
|
hwr = bus_space_read_1(asict, asich, WE790_HWR);
|
|
bus_space_write_1(asict, asich, WE790_HWR,
|
|
hwr | WE790_HWR_SWH);
|
|
|
|
x = bus_space_read_1(asict, asich, WE790_GCR);
|
|
i = ((x & WE790_GCR_IR2) >> 4) |
|
|
((x & (WE790_GCR_IR1|WE790_GCR_IR0)) >> 2);
|
|
bus_space_write_1(asict, asich, WE790_HWR,
|
|
hwr & ~WE790_HWR_SWH);
|
|
|
|
if (ia->ia_irq != IRQUNK && ia->ia_irq != we_790_irq[i])
|
|
printf("%s%d: overriding IRQ %d to %d\n",
|
|
we_cd.cd_name, cf->cf_unit, ia->ia_irq,
|
|
we_790_irq[i]);
|
|
ia->ia_irq = we_790_irq[i];
|
|
} else if (type & WE_SOFTCONFIG) {
|
|
/* Assemble together the encoded interrupt number. */
|
|
i = (bus_space_read_1(asict, asich, WE_ICR) & WE_ICR_IR2) |
|
|
((bus_space_read_1(asict, asich, WE_IRR) &
|
|
(WE_IRR_IR0 | WE_IRR_IR1)) >> 5);
|
|
|
|
if (ia->ia_irq != IRQUNK && ia->ia_irq != we_584_irq[i])
|
|
printf("%s%d: overriding IRQ %d to %d\n",
|
|
we_cd.cd_name, cf->cf_unit, ia->ia_irq,
|
|
we_584_irq[i]);
|
|
ia->ia_irq = we_584_irq[i];
|
|
}
|
|
|
|
/* So, we say we've found it! */
|
|
ia->ia_iosize = WE_NPORTS;
|
|
ia->ia_msize = memsize;
|
|
rv = 1;
|
|
|
|
out:
|
|
if (asich_valid)
|
|
bus_space_unmap(asict, asich, WE_NPORTS);
|
|
if (memh_valid)
|
|
bus_space_unmap(memt, memh, memsize);
|
|
return (rv);
|
|
}
|
|
|
|
void
|
|
we_attach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct we_softc *wsc = (struct we_softc *)self;
|
|
struct dp8390_softc *sc = &wsc->sc_dp8390;
|
|
struct isa_attach_args *ia = aux;
|
|
bus_space_tag_t nict, asict, memt;
|
|
bus_space_handle_t nich, asich, memh;
|
|
const char *typestr;
|
|
u_int8_t x;
|
|
int i;
|
|
|
|
printf("\n");
|
|
|
|
nict = asict = ia->ia_iot;
|
|
memt = ia->ia_memt;
|
|
|
|
/* Map the device. */
|
|
if (bus_space_map(asict, ia->ia_iobase, WE_NPORTS, 0, &asich)) {
|
|
printf("%s: can't map nic i/o space\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
if (bus_space_subregion(asict, asich, WE_NIC_OFFSET, WE_NIC_NPORTS,
|
|
&nich)) {
|
|
printf("%s: can't subregion i/o space\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
typestr = we_params(asict, asich, &wsc->sc_type, NULL,
|
|
&wsc->sc_16bitp, &sc->is790);
|
|
if (typestr == NULL) {
|
|
printf("%s: where did the card go?\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Map memory space. Note we use the size that might have
|
|
* been overridden by the user.
|
|
*/
|
|
if (bus_space_map(memt, ia->ia_maddr, ia->ia_msize, 0, &memh)) {
|
|
printf("%s: can't map shared memory\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Allow user to override 16-bit mode. 8-bit takes precedence.
|
|
*/
|
|
if (self->dv_cfdata->cf_flags & WE_FLAGS_FORCE_16BIT_MODE)
|
|
wsc->sc_16bitp = 1;
|
|
if (self->dv_cfdata->cf_flags & WE_FLAGS_FORCE_8BIT_MODE)
|
|
wsc->sc_16bitp = 0;
|
|
|
|
wsc->sc_asict = asict;
|
|
wsc->sc_asich = asich;
|
|
|
|
sc->sc_regt = nict;
|
|
sc->sc_regh = nich;
|
|
|
|
sc->sc_buft = memt;
|
|
sc->sc_bufh = memh;
|
|
|
|
/* Interface is always enabled. */
|
|
sc->sc_enabled = 1;
|
|
|
|
/* Registers are linear. */
|
|
for (i = 0; i < 16; i++)
|
|
sc->sc_reg_map[i] = i;
|
|
|
|
/* Now we can use the NIC_{GET,PUT}() macros. */
|
|
|
|
printf("%s: %s Ethernet (%s-bit)\n", sc->sc_dev.dv_xname,
|
|
typestr, wsc->sc_16bitp ? "16" : "8");
|
|
|
|
/* Get station address from EEPROM. */
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
sc->sc_enaddr[i] = bus_space_read_1(asict, asich, WE_PROM + i);
|
|
|
|
/*
|
|
* Set upper address bits and 8/16 bit access to shared memory.
|
|
*/
|
|
if (sc->is790) {
|
|
wsc->sc_laar_proto =
|
|
bus_space_read_1(asict, asich, WE_LAAR) &
|
|
~WE_LAAR_M16EN;
|
|
bus_space_write_1(asict, asich, WE_LAAR,
|
|
wsc->sc_laar_proto | (wsc->sc_16bitp ? WE_LAAR_M16EN : 0));
|
|
} else if ((wsc->sc_type & WE_SOFTCONFIG) ||
|
|
#ifdef TOSH_ETHER
|
|
(wsc->sc_type == WE_TYPE_TOSHIBA1) ||
|
|
(wsc->sc_type == WE_TYPE_TOSHIBA4) ||
|
|
#endif
|
|
(wsc->sc_type == WE_TYPE_WD8013EBT)) {
|
|
wsc->sc_laar_proto = (ia->ia_maddr >> 19) & WE_LAAR_ADDRHI;
|
|
if (wsc->sc_16bitp)
|
|
wsc->sc_laar_proto |= WE_LAAR_L16EN;
|
|
bus_space_write_1(asict, asich, WE_LAAR,
|
|
wsc->sc_laar_proto | (wsc->sc_16bitp ? WE_LAAR_M16EN : 0));
|
|
}
|
|
|
|
/*
|
|
* Set address and enable interface shared memory.
|
|
*/
|
|
if (sc->is790) {
|
|
/* XXX MAGIC CONSTANTS XXX */
|
|
x = bus_space_read_1(asict, asich, 0x04);
|
|
bus_space_write_1(asict, asich, 0x04, x | 0x80);
|
|
bus_space_write_1(asict, asich, 0x0b,
|
|
((ia->ia_maddr >> 13) & 0x0f) |
|
|
((ia->ia_maddr >> 11) & 0x40) |
|
|
(bus_space_read_1(asict, asich, 0x0b) & 0xb0));
|
|
bus_space_write_1(asict, asich, 0x04, x);
|
|
wsc->sc_msr_proto = 0x00;
|
|
sc->cr_proto = 0x00;
|
|
} else {
|
|
#ifdef TOSH_ETHER
|
|
if (wsc->sc_type == WE_TYPE_TOSHIBA1 ||
|
|
wsc->sc_type == WE_TYPE_TOSHIBA4) {
|
|
bus_space_write_1(asict, asich, WE_MSR + 1,
|
|
((ia->ia_maddr >> 8) & 0xe0) | 0x04);
|
|
bus_space_write_1(asict, asich, WE_MSR + 2,
|
|
((ia->ia_maddr >> 16) & 0x0f));
|
|
wsc->sc_msr_proto = WE_MSR_POW;
|
|
} else
|
|
#endif
|
|
wsc->sc_msr_proto = (ia->ia_maddr >> 13) &
|
|
WE_MSR_ADDR;
|
|
|
|
sc->cr_proto = ED_CR_RD2;
|
|
}
|
|
|
|
bus_space_write_1(asict, asich, WE_MSR,
|
|
wsc->sc_msr_proto | WE_MSR_MENB);
|
|
WE_DELAY(wsc);
|
|
|
|
/*
|
|
* DCR gets:
|
|
*
|
|
* FIFO threshold to 8, No auto-init Remote DMA,
|
|
* byte order=80x86.
|
|
*
|
|
* 16-bit cards also get word-wide DMA transfers.
|
|
*/
|
|
sc->dcr_reg = ED_DCR_FT1 | ED_DCR_LS |
|
|
(wsc->sc_16bitp ? ED_DCR_WTS : 0);
|
|
|
|
sc->test_mem = we_test_mem;
|
|
sc->ring_copy = we_ring_copy;
|
|
sc->write_mbuf = we_write_mbuf;
|
|
sc->read_hdr = we_read_hdr;
|
|
sc->recv_int = we_recv_int;
|
|
|
|
sc->sc_mediachange = we_mediachange;
|
|
sc->sc_mediastatus = we_mediastatus;
|
|
|
|
sc->mem_start = 0;
|
|
sc->mem_size = ia->ia_msize;
|
|
|
|
sc->sc_flags = self->dv_cfdata->cf_flags;
|
|
|
|
/* Do generic parts of attach. */
|
|
if (wsc->sc_type & WE_SOFTCONFIG) {
|
|
int defmedia = IFM_ETHER;
|
|
|
|
if (sc->is790) {
|
|
x = bus_space_read_1(asict, asich, WE790_HWR);
|
|
bus_space_write_1(asict, asich, WE790_HWR,
|
|
x | WE790_HWR_SWH);
|
|
if (bus_space_read_1(asict, asich, WE790_GCR) &
|
|
WE790_GCR_GPOUT)
|
|
defmedia |= IFM_10_2;
|
|
else
|
|
defmedia |= IFM_10_5;
|
|
bus_space_write_1(asict, asich, WE790_HWR,
|
|
x & ~WE790_HWR_SWH);
|
|
} else {
|
|
x = bus_space_read_1(asict, asich, WE_IRR);
|
|
if (x & WE_IRR_OUT2)
|
|
defmedia |= IFM_10_2;
|
|
else
|
|
defmedia |= IFM_10_5;
|
|
}
|
|
i = dp8390_config(sc, we_media, NWE_MEDIA, defmedia);
|
|
} else
|
|
i = dp8390_config(sc, NULL, 0, 0);
|
|
if (i) {
|
|
printf("%s: configuration failed\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Disable 16-bit access to shared memory - we leave it disabled
|
|
* so that:
|
|
*
|
|
* (1) machines reboot properly when the board is set to
|
|
* 16-bit mode and there are conflicting 8-bit devices
|
|
* within the same 128k address space as this board's
|
|
* shared memory, and
|
|
*
|
|
* (2) so that other 8-bit devices with shared memory
|
|
* in this same 128k address space will work.
|
|
*/
|
|
WE_MEM_DISABLE(wsc);
|
|
|
|
/*
|
|
* Enable the configured interrupt.
|
|
*/
|
|
if (sc->is790)
|
|
bus_space_write_1(asict, asich, WE790_ICR,
|
|
bus_space_read_1(asict, asich, WE790_ICR) |
|
|
WE790_ICR_EIL);
|
|
else if (wsc->sc_type & WE_SOFTCONFIG)
|
|
bus_space_write_1(asict, asich, WE_IRR,
|
|
bus_space_read_1(asict, asich, WE_IRR) | WE_IRR_IEN);
|
|
else if (ia->ia_irq == IRQUNK) {
|
|
printf("%s: can't wildcard IRQ on a %s\n",
|
|
sc->sc_dev.dv_xname, typestr);
|
|
return;
|
|
}
|
|
|
|
/* Establish interrupt handler. */
|
|
wsc->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq, IST_EDGE,
|
|
IPL_NET, dp8390_intr, sc);
|
|
if (wsc->sc_ih == NULL)
|
|
printf("%s: can't establish interrupt\n", sc->sc_dev.dv_xname);
|
|
}
|
|
|
|
int
|
|
we_test_mem(sc)
|
|
struct dp8390_softc *sc;
|
|
{
|
|
struct we_softc *wsc = (struct we_softc *)sc;
|
|
bus_space_tag_t memt = sc->sc_buft;
|
|
bus_space_handle_t memh = sc->sc_bufh;
|
|
bus_size_t memsize = sc->mem_size;
|
|
int i;
|
|
|
|
if (wsc->sc_16bitp)
|
|
bus_space_set_region_2(memt, memh, 0, 0, memsize >> 1);
|
|
else
|
|
bus_space_set_region_1(memt, memh, 0, 0, memsize);
|
|
|
|
if (wsc->sc_16bitp) {
|
|
for (i = 0; i < memsize; i += 2) {
|
|
if (bus_space_read_2(memt, memh, i) != 0)
|
|
goto fail;
|
|
}
|
|
} else {
|
|
for (i = 0; i < memsize; i++) {
|
|
if (bus_space_read_1(memt, memh, i) != 0)
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
|
|
fail:
|
|
printf("%s: failed to clear shared memory at offset 0x%x\n",
|
|
sc->sc_dev.dv_xname, i);
|
|
WE_MEM_DISABLE(wsc);
|
|
return (1);
|
|
}
|
|
|
|
__inline void
|
|
we_writemem(wsc, from, to, len)
|
|
struct we_softc *wsc;
|
|
u_int8_t *from;
|
|
int to, len;
|
|
{
|
|
bus_space_tag_t memt = wsc->sc_dp8390.sc_buft;
|
|
bus_space_handle_t memh = wsc->sc_dp8390.sc_bufh;
|
|
|
|
if (wsc->sc_16bitp) {
|
|
bus_space_write_region_2(memt, memh, to, (u_int16_t *)from,
|
|
len >> 1);
|
|
if (len & 1)
|
|
bus_space_write_2(memt, memh, to + (len & ~1),
|
|
(u_int16_t)(*(from + (len & ~1))));
|
|
} else
|
|
bus_space_write_region_1(memt, memh, to, from, len);
|
|
}
|
|
|
|
__inline void
|
|
we_readmem(wsc, from, to, len)
|
|
struct we_softc *wsc;
|
|
int from;
|
|
u_int8_t *to;
|
|
int len;
|
|
{
|
|
bus_space_tag_t memt = wsc->sc_dp8390.sc_buft;
|
|
bus_space_handle_t memh = wsc->sc_dp8390.sc_bufh;
|
|
|
|
if (wsc->sc_16bitp) {
|
|
bus_space_read_region_2(memt, memh, from, (u_int16_t *)to,
|
|
len >> 1);
|
|
if (len & 1)
|
|
*(to + (len & ~1)) = bus_space_read_2(memt,
|
|
memh, from + (len & ~1)) & 0xff;
|
|
} else
|
|
bus_space_read_region_1(memt, memh, from, to, len);
|
|
}
|
|
|
|
int
|
|
we_write_mbuf(sc, m, buf)
|
|
struct dp8390_softc *sc;
|
|
struct mbuf *m;
|
|
int buf;
|
|
{
|
|
struct we_softc *wsc = (struct we_softc *)sc;
|
|
int savelen;
|
|
|
|
savelen = m->m_pkthdr.len;
|
|
|
|
WE_MEM_ENABLE(wsc);
|
|
|
|
for (; m != NULL; buf += m->m_len, m = m->m_next)
|
|
we_writemem(wsc, mtod(m, u_int8_t *), buf, m->m_len);
|
|
|
|
WE_MEM_DISABLE(wsc);
|
|
|
|
return (savelen);
|
|
}
|
|
|
|
int
|
|
we_ring_copy(sc, src, dst, amount)
|
|
struct dp8390_softc *sc;
|
|
int src;
|
|
caddr_t dst;
|
|
u_short amount;
|
|
{
|
|
struct we_softc *wsc = (struct we_softc *)sc;
|
|
u_short tmp_amount;
|
|
|
|
/* Does copy wrap to lower addr in ring buffer? */
|
|
if (src + amount > sc->mem_end) {
|
|
tmp_amount = sc->mem_end - src;
|
|
|
|
/* Copy amount up to end of NIC memory. */
|
|
we_readmem(wsc, src, dst, tmp_amount);
|
|
|
|
amount -= tmp_amount;
|
|
src = sc->mem_ring;
|
|
dst += tmp_amount;
|
|
}
|
|
|
|
we_readmem(wsc, src, dst, amount);
|
|
|
|
return (src + amount);
|
|
}
|
|
|
|
void
|
|
we_read_hdr(sc, packet_ptr, packet_hdrp)
|
|
struct dp8390_softc *sc;
|
|
int packet_ptr;
|
|
struct dp8390_ring *packet_hdrp;
|
|
{
|
|
struct we_softc *wsc = (struct we_softc *)sc;
|
|
|
|
we_readmem(wsc, packet_ptr, (u_int8_t *)packet_hdrp,
|
|
sizeof(struct dp8390_ring));
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
packet_hdrp->count = bswap16(packet_hdrp->count);
|
|
#endif
|
|
}
|
|
|
|
void
|
|
we_recv_int(sc)
|
|
struct dp8390_softc *sc;
|
|
{
|
|
struct we_softc *wsc = (struct we_softc *)sc;
|
|
|
|
WE_MEM_ENABLE(wsc);
|
|
dp8390_rint(sc);
|
|
WE_MEM_DISABLE(wsc);
|
|
}
|
|
|
|
int
|
|
we_mediachange(sc)
|
|
struct dp8390_softc *sc;
|
|
{
|
|
|
|
/*
|
|
* Current media is already set up. Just reset the interface
|
|
* to let the new value take hold. The new media will be
|
|
* set up in we_init_card() called via dp8390_init().
|
|
*/
|
|
dp8390_reset(sc);
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
we_mediastatus(sc, ifmr)
|
|
struct dp8390_softc *sc;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct ifmedia *ifm = &sc->sc_media;
|
|
|
|
/*
|
|
* The currently selected media is always the active media.
|
|
*/
|
|
ifmr->ifm_active = ifm->ifm_cur->ifm_media;
|
|
}
|
|
|
|
void
|
|
we_init_card(sc)
|
|
struct dp8390_softc *sc;
|
|
{
|
|
struct we_softc *wsc = (struct we_softc *)sc;
|
|
struct ifmedia *ifm = &sc->sc_media;
|
|
|
|
we_set_media(wsc, ifm->ifm_cur->ifm_media);
|
|
}
|
|
|
|
void
|
|
we_set_media(wsc, media)
|
|
struct we_softc *wsc;
|
|
int media;
|
|
{
|
|
struct dp8390_softc *sc = &wsc->sc_dp8390;
|
|
bus_space_tag_t asict = wsc->sc_asict;
|
|
bus_space_handle_t asich = wsc->sc_asich;
|
|
u_int8_t hwr, gcr, irr;
|
|
|
|
if (sc->is790) {
|
|
hwr = bus_space_read_1(asict, asich, WE790_HWR);
|
|
bus_space_write_1(asict, asich, WE790_HWR,
|
|
hwr | WE790_HWR_SWH);
|
|
gcr = bus_space_read_1(asict, asich, WE790_GCR);
|
|
if (IFM_SUBTYPE(media) == IFM_10_2)
|
|
gcr |= WE790_GCR_GPOUT;
|
|
else
|
|
gcr &= ~WE790_GCR_GPOUT;
|
|
bus_space_write_1(asict, asich, WE790_GCR,
|
|
gcr | WE790_GCR_LIT);
|
|
bus_space_write_1(asict, asich, WE790_HWR,
|
|
hwr & ~WE790_HWR_SWH);
|
|
return;
|
|
}
|
|
|
|
irr = bus_space_read_1(wsc->sc_asict, wsc->sc_asich, WE_IRR);
|
|
if (IFM_SUBTYPE(media) == IFM_10_2)
|
|
irr |= WE_IRR_OUT2;
|
|
else
|
|
irr &= ~WE_IRR_OUT2;
|
|
bus_space_write_1(wsc->sc_asict, wsc->sc_asich, WE_IRR, irr);
|
|
}
|
|
|
|
const char *
|
|
we_params(asict, asich, typep, memsizep, is16bitp, is790p)
|
|
bus_space_tag_t asict;
|
|
bus_space_handle_t asich;
|
|
u_int8_t *typep;
|
|
bus_size_t *memsizep;
|
|
int *is16bitp, *is790p;
|
|
{
|
|
const char *typestr;
|
|
bus_size_t memsize;
|
|
int is16bit, is790;
|
|
u_int8_t type;
|
|
|
|
memsize = 8192;
|
|
is16bit = is790 = 0;
|
|
|
|
type = bus_space_read_1(asict, asich, WE_CARD_ID);
|
|
switch (type) {
|
|
case WE_TYPE_WD8003S:
|
|
typestr = "WD8003S";
|
|
break;
|
|
case WE_TYPE_WD8003E:
|
|
typestr = "WD8003E";
|
|
break;
|
|
case WE_TYPE_WD8003EB:
|
|
typestr = "WD8003EB";
|
|
break;
|
|
case WE_TYPE_WD8003W:
|
|
typestr = "WD8003W";
|
|
break;
|
|
case WE_TYPE_WD8013EBT:
|
|
typestr = "WD8013EBT";
|
|
memsize = 16384;
|
|
is16bit = 1;
|
|
break;
|
|
case WE_TYPE_WD8013W:
|
|
typestr = "WD8013W";
|
|
memsize = 16384;
|
|
is16bit = 1;
|
|
break;
|
|
case WE_TYPE_WD8013EP: /* also WD8003EP */
|
|
if (bus_space_read_1(asict, asich, WE_ICR) & WE_ICR_16BIT) {
|
|
is16bit = 1;
|
|
memsize = 16384;
|
|
typestr = "WD8013EP";
|
|
} else
|
|
typestr = "WD8003EP";
|
|
break;
|
|
case WE_TYPE_WD8013WC:
|
|
typestr = "WD8013WC";
|
|
memsize = 16384;
|
|
is16bit = 1;
|
|
break;
|
|
case WE_TYPE_WD8013EBP:
|
|
typestr = "WD8013EBP";
|
|
memsize = 16384;
|
|
is16bit = 1;
|
|
break;
|
|
case WE_TYPE_WD8013EPC:
|
|
typestr = "WD8013EPC";
|
|
memsize = 16384;
|
|
is16bit = 1;
|
|
break;
|
|
case WE_TYPE_SMC8216C:
|
|
case WE_TYPE_SMC8216T:
|
|
{
|
|
u_int8_t hwr;
|
|
|
|
typestr = (type == WE_TYPE_SMC8216C) ?
|
|
"SMC8216/SMC8216C" : "SMC8216T";
|
|
|
|
hwr = bus_space_read_1(asict, asich, WE790_HWR);
|
|
bus_space_write_1(asict, asich, WE790_HWR,
|
|
hwr | WE790_HWR_SWH);
|
|
switch (bus_space_read_1(asict, asich, WE790_RAR) &
|
|
WE790_RAR_SZ64) {
|
|
case WE790_RAR_SZ64:
|
|
memsize = 65536;
|
|
break;
|
|
case WE790_RAR_SZ32:
|
|
memsize = 32768;
|
|
break;
|
|
case WE790_RAR_SZ16:
|
|
memsize = 16384;
|
|
break;
|
|
case WE790_RAR_SZ8:
|
|
/* 8216 has 16K shared mem -- 8416 has 8K */
|
|
typestr = (type == WE_TYPE_SMC8216C) ?
|
|
"SMC8416C/SMC8416BT" : "SMC8416T";
|
|
memsize = 8192;
|
|
break;
|
|
}
|
|
bus_space_write_1(asict, asich, WE790_HWR, hwr);
|
|
|
|
is16bit = 1;
|
|
is790 = 1;
|
|
break;
|
|
}
|
|
#ifdef TOSH_ETHER
|
|
case WE_TYPE_TOSHIBA1:
|
|
typestr = "Toshiba1";
|
|
memsize = 32768;
|
|
is16bit = 1;
|
|
break;
|
|
case WE_TYPE_TOSHIBA4:
|
|
typestr = "Toshiba4";
|
|
memsize = 32768;
|
|
is16bit = 1;
|
|
break;
|
|
#endif
|
|
default:
|
|
/* Not one we recognize. */
|
|
return (NULL);
|
|
}
|
|
|
|
/*
|
|
* Make some adjustments to initial values depending on what is
|
|
* found in the ICR.
|
|
*/
|
|
if (is16bit && (type != WE_TYPE_WD8013EBT) &&
|
|
#ifdef TOSH_ETHER
|
|
(type != WE_TYPE_TOSHIBA1 && type != WE_TYPE_TOSHIBA4) &&
|
|
#endif
|
|
(bus_space_read_1(asict, asich, WE_ICR) & WE_ICR_16BIT) == 0) {
|
|
is16bit = 0;
|
|
memsize = 8192;
|
|
}
|
|
|
|
#ifdef WE_DEBUG
|
|
{
|
|
int i;
|
|
|
|
printf("we_params: type = 0x%x, typestr = %s, is16bit = %d, "
|
|
"memsize = %d\n", type, typestr, is16bit, memsize);
|
|
for (i = 0; i < 8; i++)
|
|
printf(" %d -> 0x%x\n", i,
|
|
bus_space_read_1(asict, asich, i));
|
|
}
|
|
#endif
|
|
|
|
if (typep != NULL)
|
|
*typep = type;
|
|
if (memsizep != NULL)
|
|
*memsizep = memsize;
|
|
if (is16bitp != NULL)
|
|
*is16bitp = is16bit;
|
|
if (is790p != NULL)
|
|
*is790p = is790;
|
|
return (typestr);
|
|
}
|