1132 lines
29 KiB
C
1132 lines
29 KiB
C
/* $NetBSD: idesc.c,v 1.31 1998/01/12 10:39:46 thorpej Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1994 Michael L. Hitch
|
|
* Copyright (c) 1993, 1994 Charles Hannum.
|
|
* Copyright (c) 1990 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Don Ahn.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)wd.c 7.4 (Berkeley) 5/25/91
|
|
*/
|
|
/*
|
|
* Copyright (c) 1994 Michael L. Hitch
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Brad Pepers
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* A4000 IDE interface, emulating a SCSI controller
|
|
*/
|
|
|
|
#include "idesc.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/device.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/dkstat.h>
|
|
#include <sys/disklabel.h>
|
|
#include <sys/dkstat.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/reboot.h>
|
|
#include <sys/file.h>
|
|
#include <sys/ioctl.h>
|
|
#include <dev/scsipi/scsi_all.h>
|
|
#include <dev/scsipi/scsipi_all.h>
|
|
#include <dev/scsipi/scsipi_disk.h>
|
|
#include <dev/scsipi/scsi_disk.h>
|
|
#include <dev/scsipi/scsiconf.h>
|
|
#include <amiga/amiga/device.h>
|
|
#include <amiga/amiga/cia.h>
|
|
#include <amiga/amiga/custom.h>
|
|
#include <amiga/amiga/isr.h>
|
|
#include <amiga/dev/zbusvar.h>
|
|
|
|
#define b_cylin b_resid
|
|
|
|
/* defines */
|
|
|
|
struct regs {
|
|
volatile u_short ide_data; /* 00 */
|
|
char ____pad0[4];
|
|
volatile u_char ide_error; /* 06 */
|
|
#define ide_precomp ide_error
|
|
char ____pad1[3];
|
|
volatile u_char ide_seccnt; /* 0a */
|
|
char ____pad2[3];
|
|
volatile u_char ide_sector; /* 0e */
|
|
char ____pad3[3];
|
|
volatile u_char ide_cyl_lo; /* 12 */
|
|
char ____pad4[3];
|
|
volatile u_char ide_cyl_hi; /* 16 */
|
|
char ____pad5[3];
|
|
volatile u_char ide_sdh; /* 1a */
|
|
char ____pad6[3];
|
|
volatile u_char ide_command; /* 1e */
|
|
#define ide_status ide_command
|
|
char ____pad7;
|
|
char ____pad8[0xfe0];
|
|
volatile short ide_intpnd; /* 1000 */
|
|
char ____pad9[24];
|
|
volatile u_char ide_altsts; /* 101a */
|
|
#define ide_ctlr ide_altsts
|
|
};
|
|
typedef volatile struct regs *ide_regmap_p;
|
|
|
|
#define IDES_BUSY 0x80 /* controller busy bit */
|
|
#define IDES_READY 0x40 /* selected drive is ready */
|
|
#define IDES_WRTFLT 0x20 /* Write fault */
|
|
#define IDES_SEEKCMPLT 0x10 /* Seek complete */
|
|
#define IDES_DRQ 0x08 /* Data request bit */
|
|
#define IDES_ECCCOR 0x04 /* ECC correction made in data */
|
|
#define IDES_INDEX 0x02 /* Index pulse from selected drive */
|
|
#define IDES_ERR 0x01 /* Error detect bit */
|
|
|
|
#define IDEC_RESTORE 0x10
|
|
|
|
#define IDEC_READ 0x20
|
|
#define IDEC_WRITE 0x30
|
|
|
|
#define IDEC_XXX 0x40
|
|
#define IDEC_FORMAT 0x50
|
|
#define IDEC_XXXX 0x70
|
|
#define IDEC_DIAGNOSE 0x90
|
|
#define IDEC_IDC 0x91
|
|
|
|
#define IDEC_READP 0xec
|
|
|
|
#define IDECTL_IDS 0x02 /* Interrupt disable */
|
|
|
|
struct ideparams {
|
|
/* drive info */
|
|
short idep_config; /* general configuration */
|
|
short idep_fixedcyl; /* number of non-removable cylinders */
|
|
short idep_removcyl; /* number of removable cylinders */
|
|
short idep_heads; /* number of heads */
|
|
short idep_unfbytespertrk; /* number of unformatted bytes/track */
|
|
short idep_unfbytes; /* number of unformatted bytes/sector */
|
|
short idep_sectors; /* number of sectors */
|
|
short idep_minisg; /* minimum bytes in inter-sector gap*/
|
|
short idep_minplo; /* minimum bytes in postamble */
|
|
short idep_vendstat; /* number of words of vendor status */
|
|
/* controller info */
|
|
char idep_cnsn[20]; /* controller serial number */
|
|
short idep_cntype; /* controller type */
|
|
#define IDETYPE_SINGLEPORTSECTOR 1 /* single port, single sector buffer */
|
|
#define IDETYPE_DUALPORTMULTI 2 /* dual port, multiple sector buffer */
|
|
#define IDETYPE_DUALPORTMULTICACHE 3 /* above plus track cache */
|
|
short idep_cnsbsz; /* sector buffer size, in sectors */
|
|
short idep_necc; /* ecc bytes appended */
|
|
char idep_rev[8]; /* firmware revision */
|
|
char idep_model[40]; /* model name */
|
|
short idep_nsecperint; /* sectors per interrupt */
|
|
short idep_usedmovsd; /* can use double word read/write? */
|
|
};
|
|
|
|
/*
|
|
* Per drive structure.
|
|
* N per controller (presently 2) (DRVS_PER_CTLR)
|
|
*/
|
|
struct ide_softc {
|
|
struct device sc_dev;
|
|
long sc_bcount; /* byte count left */
|
|
long sc_mbcount; /* total byte count left */
|
|
short sc_skip; /* blocks already transferred */
|
|
short sc_mskip; /* blocks already transfereed for multi */
|
|
long sc_blknum; /* starting block of active request */
|
|
u_char *sc_buf; /* buffer address of active request */
|
|
long sc_blkcnt; /* block count of active request */
|
|
int sc_flags;
|
|
#define IDEF_ALIVE 0x01 /* it's a valid device */
|
|
short sc_error;
|
|
char sc_drive;
|
|
char sc_state;
|
|
long sc_secpercyl;
|
|
long sc_sectors;
|
|
struct buf sc_dq;
|
|
struct ideparams sc_params;
|
|
};
|
|
|
|
struct ide_pending {
|
|
TAILQ_ENTRY(ide_pending) link;
|
|
struct scsipi_xfer *xs;
|
|
};
|
|
|
|
/*
|
|
* Per controller structure.
|
|
*/
|
|
struct idec_softc
|
|
{
|
|
struct device sc_dev;
|
|
struct isr sc_isr;
|
|
|
|
struct scsipi_link sc_link; /* proto for sub devices */
|
|
ide_regmap_p sc_cregs; /* driver specific regs */
|
|
volatile u_char *sc_a1200; /* A1200 interrupt control */
|
|
TAILQ_HEAD(,ide_pending) sc_xslist; /* LIFO */
|
|
struct ide_pending sc_xsstore[8][8]; /* one for every unit */
|
|
struct scsipi_xfer *sc_xs; /* transfer from high level code */
|
|
int sc_flags;
|
|
#define IDECF_ALIVE 0x01 /* Controller is alive */
|
|
#define IDECF_ACTIVE 0x02
|
|
#define IDECF_SINGLE 0x04 /* sector at a time mode */
|
|
#define IDECF_READ 0x08 /* Current operation is read */
|
|
#define IDECF_A1200 0x10 /* A1200 IDE */
|
|
struct ide_softc *sc_cur; /* drive we are currently doing work for */
|
|
int state;
|
|
int saved;
|
|
int retry;
|
|
char sc_stat[2];
|
|
struct ide_softc sc_ide[2];
|
|
};
|
|
|
|
int ide_scsicmd __P((struct scsipi_xfer *));
|
|
|
|
void idescattach __P((struct device *, struct device *, void *));
|
|
int idescmatch __P((struct device *, struct cfdata *, void *));
|
|
|
|
int ideicmd __P((struct idec_softc *, int, void *, int, void *, int));
|
|
int idego __P((struct idec_softc *, struct scsipi_xfer *));
|
|
int idegetsense __P((struct idec_softc *, struct scsipi_xfer *));
|
|
void ideabort __P((struct idec_softc *, ide_regmap_p, char *));
|
|
void ideerror __P((struct idec_softc *, ide_regmap_p, u_char));
|
|
int idestart __P((struct idec_softc *));
|
|
int idereset __P((struct idec_softc *));
|
|
void idesetdelay __P((int));
|
|
void ide_scsidone __P((struct idec_softc *, int));
|
|
void ide_donextcmd __P((struct idec_softc *));
|
|
int idesc_intr __P((void *));
|
|
|
|
struct scsipi_adapter idesc_scsiswitch = {
|
|
ide_scsicmd,
|
|
minphys, /* no max transfer len, at this level */
|
|
0, /* no lun support */
|
|
0, /* no lun support */
|
|
};
|
|
|
|
struct scsipi_device idesc_scsidev = {
|
|
NULL, /* use default error handler */
|
|
NULL, /* do not have a start functio */
|
|
NULL, /* have no async handler */
|
|
NULL, /* Use default done routine */
|
|
};
|
|
|
|
struct cfattach idesc_ca = {
|
|
sizeof(struct idec_softc), idescmatch, idescattach
|
|
};
|
|
|
|
struct {
|
|
short ide_err;
|
|
char scsi_sense_key;
|
|
char scsi_sense_qual;
|
|
} sense_convert[] = {
|
|
{ 0x0001, 0x03, 0x13}, /* Data address mark not found */
|
|
{ 0x0002, 0x04, 0x06}, /* Reference position not found */
|
|
{ 0x0004, 0x05, 0x20}, /* Invalid command */
|
|
{ 0x0010, 0x03, 0x12}, /* ID address mark not found */
|
|
{ 0x0040, 0x03, 0x11}, /* Unrecovered read error */
|
|
{ 0x0080, 0x03, 0x11}, /* Bad block mark detected */
|
|
{ 0x0000, 0x05, 0x00} /* unknown */
|
|
};
|
|
|
|
/*
|
|
* protos.
|
|
*/
|
|
|
|
int idecommand __P((struct ide_softc *, int, int, int, int, int));
|
|
int idewait __P((struct idec_softc *, int));
|
|
int idegetctlr __P((struct ide_softc *));
|
|
int ideiread __P((struct ide_softc *, long, u_char *, int));
|
|
int ideiwrite __P((struct ide_softc *, long, u_char *, int));
|
|
|
|
#define wait_for_drq(ide) idewait(ide, IDES_DRQ)
|
|
#define wait_for_ready(ide) idewait(ide, IDES_READY | IDES_SEEKCMPLT)
|
|
#define wait_for_unbusy(ide) idewait(ide,0)
|
|
|
|
int ide_no_int = 0;
|
|
|
|
#ifdef DEBUG
|
|
void ide_dump_regs __P((ide_regmap_p));
|
|
|
|
int ide_debug = 0;
|
|
|
|
#define TRACE0(arg) if (ide_debug > 1) printf(arg)
|
|
#define TRACE1(arg1,arg2) if (ide_debug > 1) printf(arg1,arg2)
|
|
#define QPRINTF(a) if (ide_debug > 1) printf a
|
|
|
|
#else /* !DEBUG */
|
|
|
|
#define TRACE0(arg)
|
|
#define TRACE1(arg1,arg2)
|
|
#define QPRINTF(a)
|
|
|
|
#endif /* !DEBUG */
|
|
|
|
|
|
/*
|
|
* if we are an A4000 we are here.
|
|
*/
|
|
int
|
|
idescmatch(pdp, cfp, auxp)
|
|
struct device *pdp;
|
|
struct cfdata *cfp;
|
|
void *auxp;
|
|
{
|
|
char *mbusstr;
|
|
|
|
mbusstr = auxp;
|
|
if ((is_a4000() || is_a1200()) && matchname(auxp, "idesc"))
|
|
return(1);
|
|
return(0);
|
|
}
|
|
|
|
void
|
|
idescattach(pdp, dp, auxp)
|
|
struct device *pdp, *dp;
|
|
void *auxp;
|
|
{
|
|
ide_regmap_p rp;
|
|
struct idec_softc *sc;
|
|
int i;
|
|
|
|
sc = (struct idec_softc *)dp;
|
|
if (is_a4000())
|
|
sc->sc_cregs = rp = (ide_regmap_p) ztwomap(0xdd2020);
|
|
else {
|
|
/* Let's hope the A1200 will work with the same regs */
|
|
sc->sc_cregs = rp = (ide_regmap_p) ztwomap(0xda0000);
|
|
sc->sc_a1200 = ztwomap(0xda8000 + 0x1000);
|
|
sc->sc_flags |= IDECF_A1200;
|
|
printf(" A1200 @ %p:%p", rp, sc->sc_a1200);
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
if (ide_debug)
|
|
ide_dump_regs(rp);
|
|
#endif
|
|
rp->ide_error = 0x5a;
|
|
rp->ide_cyl_lo = 0xa5;
|
|
if (rp->ide_error == 0x5a || rp->ide_cyl_lo != 0xa5) {
|
|
printf ("\n");
|
|
return;
|
|
}
|
|
/* test if controller will reset */
|
|
if (idereset(sc) != 0) {
|
|
delay (500000);
|
|
if (idereset(sc) != 0) {
|
|
printf (" IDE controller did not reset\n");
|
|
return;
|
|
}
|
|
}
|
|
/* Dummy up the unit structures */
|
|
sc->sc_ide[0].sc_dev.dv_parent = (void *) sc;
|
|
sc->sc_ide[1].sc_dev.dv_parent = (void *) sc;
|
|
#if 0 /* Amiga ROM does this; it also takes a lot of time on the Seacrate */
|
|
/* Execute a controller only command. */
|
|
if (idecommand(&sc->sc_ide[0], 0, 0, 0, 0, IDEC_DIAGNOSE) != 0 ||
|
|
wait_for_unbusy(sc) != 0) {
|
|
printf (" ide attach failed\n");
|
|
return;
|
|
}
|
|
#endif
|
|
#ifdef DEBUG
|
|
if (ide_debug)
|
|
ide_dump_regs(rp);
|
|
#endif
|
|
|
|
idereset(sc);
|
|
|
|
for (i = 0; i < 2; ++i) {
|
|
rp->ide_sdh = 0xa0 | (i << 4);
|
|
sc->sc_ide[i].sc_drive = i;
|
|
if ((rp->ide_status & IDES_READY) == 0)
|
|
continue;
|
|
sc->sc_ide[i].sc_flags |= IDEF_ALIVE;
|
|
rp->ide_ctlr = 0;
|
|
}
|
|
|
|
printf ("\n");
|
|
|
|
sc->sc_link.scsipi_scsi.channel = SCSI_CHANNEL_ONLY_ONE;
|
|
sc->sc_link.adapter_softc = sc;
|
|
sc->sc_link.scsipi_scsi.adapter_target = 7;
|
|
sc->sc_link.adapter = &idesc_scsiswitch;
|
|
sc->sc_link.device = &idesc_scsidev;
|
|
sc->sc_link.openings = 1;
|
|
sc->sc_link.scsipi_scsi.max_target = 7;
|
|
sc->sc_link.type = BUS_SCSI;
|
|
TAILQ_INIT(&sc->sc_xslist);
|
|
|
|
sc->sc_isr.isr_intr = idesc_intr;
|
|
sc->sc_isr.isr_arg = sc;
|
|
sc->sc_isr.isr_ipl = 2;
|
|
add_isr (&sc->sc_isr);
|
|
|
|
/*
|
|
* attach all "scsi" units on us
|
|
*/
|
|
config_found(dp, &sc->sc_link, scsiprint);
|
|
}
|
|
|
|
/*
|
|
* used by specific ide controller
|
|
*
|
|
*/
|
|
int
|
|
ide_scsicmd(xs)
|
|
struct scsipi_xfer *xs;
|
|
{
|
|
struct ide_pending *pendp;
|
|
struct idec_softc *dev;
|
|
struct scsipi_link *slp;
|
|
int flags, s;
|
|
|
|
slp = xs->sc_link;
|
|
dev = slp->adapter_softc;
|
|
flags = xs->flags;
|
|
|
|
if (flags & SCSI_DATA_UIO)
|
|
panic("ide: scsi data uio requested");
|
|
|
|
if (dev->sc_xs && flags & SCSI_POLL)
|
|
panic("ide_scsicmd: busy");
|
|
|
|
s = splbio();
|
|
pendp = &dev->sc_xsstore[slp->scsipi_scsi.target][slp->scsipi_scsi.lun];
|
|
if (pendp->xs) {
|
|
splx(s);
|
|
return(TRY_AGAIN_LATER);
|
|
}
|
|
|
|
if (dev->sc_xs) {
|
|
pendp->xs = xs;
|
|
TAILQ_INSERT_TAIL(&dev->sc_xslist, pendp, link);
|
|
splx(s);
|
|
return(SUCCESSFULLY_QUEUED);
|
|
}
|
|
pendp->xs = NULL;
|
|
dev->sc_xs = xs;
|
|
splx(s);
|
|
|
|
/*
|
|
* nothing is pending do it now.
|
|
*/
|
|
ide_donextcmd(dev);
|
|
|
|
if (flags & SCSI_POLL)
|
|
return(COMPLETE);
|
|
return(SUCCESSFULLY_QUEUED);
|
|
}
|
|
|
|
/*
|
|
* entered with dev->sc_xs pointing to the next xfer to perform
|
|
*/
|
|
void
|
|
ide_donextcmd(dev)
|
|
struct idec_softc *dev;
|
|
{
|
|
struct scsipi_xfer *xs;
|
|
struct scsipi_link *slp;
|
|
int flags, stat;
|
|
|
|
xs = dev->sc_xs;
|
|
slp = xs->sc_link;
|
|
flags = xs->flags;
|
|
|
|
if (flags & SCSI_RESET)
|
|
idereset(dev);
|
|
|
|
dev->sc_stat[0] = -1;
|
|
/* Weed out invalid targets & LUNs here */
|
|
if (slp->scsipi_scsi.target > 1 || slp->scsipi_scsi.lun != 0) {
|
|
ide_scsidone(dev, -1);
|
|
return;
|
|
}
|
|
if (flags & SCSI_POLL || ide_no_int)
|
|
stat = ideicmd(dev, slp->scsipi_scsi.target, xs->cmd, xs->cmdlen,
|
|
xs->data, xs->datalen);
|
|
else if (idego(dev, xs) == 0)
|
|
return;
|
|
else
|
|
stat = dev->sc_stat[0];
|
|
|
|
ide_scsidone(dev, stat);
|
|
}
|
|
|
|
void
|
|
ide_scsidone(dev, stat)
|
|
struct idec_softc *dev;
|
|
int stat;
|
|
{
|
|
struct ide_pending *pendp;
|
|
struct scsipi_xfer *xs;
|
|
int s, donext;
|
|
|
|
xs = dev->sc_xs;
|
|
#ifdef DIAGNOSTIC
|
|
if (xs == NULL)
|
|
panic("ide_scsidone");
|
|
#endif
|
|
/*
|
|
* is this right?
|
|
*/
|
|
xs->status = stat;
|
|
|
|
if (stat == 0)
|
|
xs->resid = 0;
|
|
else {
|
|
switch(stat) {
|
|
case SCSI_CHECK:
|
|
if ((stat = idegetsense(dev, xs)) != 0)
|
|
goto bad_sense;
|
|
xs->error = XS_SENSE;
|
|
break;
|
|
case SCSI_BUSY:
|
|
xs->error = XS_BUSY;
|
|
break;
|
|
bad_sense:
|
|
default:
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
QPRINTF(("ide_scsicmd() bad %x\n", stat));
|
|
break;
|
|
}
|
|
}
|
|
xs->flags |= ITSDONE;
|
|
|
|
/*
|
|
* grab next command before scsipi_done()
|
|
* this way no single device can hog scsi resources.
|
|
*/
|
|
s = splbio();
|
|
pendp = dev->sc_xslist.tqh_first;
|
|
if (pendp == NULL) {
|
|
donext = 0;
|
|
dev->sc_xs = NULL;
|
|
} else {
|
|
donext = 1;
|
|
TAILQ_REMOVE(&dev->sc_xslist, pendp, link);
|
|
dev->sc_xs = pendp->xs;
|
|
pendp->xs = NULL;
|
|
}
|
|
splx(s);
|
|
scsipi_done(xs);
|
|
|
|
if (donext)
|
|
ide_donextcmd(dev);
|
|
}
|
|
|
|
int
|
|
idegetsense(dev, xs)
|
|
struct idec_softc *dev;
|
|
struct scsipi_xfer *xs;
|
|
{
|
|
struct scsipi_sense rqs;
|
|
struct scsipi_link *slp;
|
|
|
|
slp = xs->sc_link;
|
|
|
|
rqs.opcode = REQUEST_SENSE;
|
|
rqs.byte2 = slp->scsipi_scsi.lun << 5;
|
|
#ifdef not_yet
|
|
rqs.length = xs->req_sense_length ? xs->req_sense_length :
|
|
sizeof(xs->sense.scsi_sense);
|
|
#else
|
|
rqs.length = sizeof(xs->sense.scsi_sense);
|
|
#endif
|
|
|
|
rqs.unused[0] = rqs.unused[1] = rqs.control = 0;
|
|
|
|
return(ideicmd(dev, slp->scsipi_scsi.target, &rqs, sizeof(rqs),
|
|
&xs->sense.scsi_sense, rqs.length));
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
void
|
|
ide_dump_regs(regs)
|
|
ide_regmap_p regs;
|
|
{
|
|
printf ("ide regs: %04x %02x %02x %02x %02x %02x %02x %02x\n",
|
|
regs->ide_data, regs->ide_error, regs->ide_seccnt,
|
|
regs->ide_sector, regs->ide_cyl_lo, regs->ide_cyl_hi,
|
|
regs->ide_sdh, regs->ide_command);
|
|
}
|
|
#endif
|
|
|
|
int
|
|
idereset(sc)
|
|
struct idec_softc *sc;
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
idewait (sc, mask)
|
|
struct idec_softc *sc;
|
|
int mask;
|
|
{
|
|
ide_regmap_p regs = sc->sc_cregs;
|
|
int timeout = 0;
|
|
|
|
if ((regs->ide_status & IDES_BUSY) == 0 &&
|
|
(regs->ide_status & mask) == mask)
|
|
return (0);
|
|
#ifdef DEBUG
|
|
if (ide_debug)
|
|
printf ("idewait busy: %02x\n", regs->ide_status);
|
|
#endif
|
|
for (;;) {
|
|
if ((regs->ide_status & IDES_BUSY) == 0 &&
|
|
(regs->ide_status & mask) == mask)
|
|
break;
|
|
if (regs->ide_status & IDES_ERR)
|
|
break;
|
|
if (++timeout > 10000) {
|
|
printf ("idewait timeout %02x\n", regs->ide_status);
|
|
return (-1);
|
|
}
|
|
delay (1000);
|
|
}
|
|
if (regs->ide_status & IDES_ERR)
|
|
printf ("idewait: error %02x %02x\n", regs->ide_error,
|
|
regs->ide_status);
|
|
#ifdef DEBUG
|
|
else if (ide_debug)
|
|
printf ("idewait delay %d %02x\n", timeout, regs->ide_status);
|
|
#endif
|
|
return (regs->ide_status & IDES_ERR);
|
|
}
|
|
|
|
int
|
|
idecommand (ide, cylin, head, sector, count, cmd)
|
|
struct ide_softc *ide;
|
|
int cylin, head, sector, count;
|
|
int cmd;
|
|
{
|
|
struct idec_softc *idec = (void *)ide->sc_dev.dv_parent;
|
|
ide_regmap_p regs = idec->sc_cregs;
|
|
int stat;
|
|
|
|
#ifdef DEBUG
|
|
if (ide_debug)
|
|
printf ("idecommand: cmd = %02x\n", cmd);
|
|
#endif
|
|
if (wait_for_unbusy(idec) < 0)
|
|
return (-1);
|
|
regs->ide_sdh = 0xa0 | (ide->sc_drive << 4) | head;
|
|
if (cmd == IDEC_DIAGNOSE || cmd == IDEC_IDC)
|
|
stat = wait_for_unbusy(idec);
|
|
else
|
|
stat = idewait(idec, IDES_READY);
|
|
if (stat < 0) printf ("idecommand:%d stat %d\n", ide->sc_drive, stat);
|
|
if (stat < 0)
|
|
return (-1);
|
|
regs->ide_precomp = 0;
|
|
regs->ide_cyl_lo = cylin;
|
|
regs->ide_cyl_hi = cylin >> 8;
|
|
regs->ide_sector = sector;
|
|
regs->ide_seccnt = count;
|
|
regs->ide_command = cmd;
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
idegetctlr(dev)
|
|
struct ide_softc *dev;
|
|
{
|
|
struct idec_softc *idec = (void *)dev->sc_dev.dv_parent;
|
|
ide_regmap_p regs = idec->sc_cregs;
|
|
char tb[DEV_BSIZE];
|
|
short *tbp = (short *) tb;
|
|
int i;
|
|
|
|
if (idecommand(dev, 0, 0, 0, 0, IDEC_READP) != 0 ||
|
|
wait_for_drq(idec) != 0) {
|
|
return (-1);
|
|
} else {
|
|
for (i = 0; i < DEV_BSIZE / 2; ++i)
|
|
*tbp++ = ntohs(regs->ide_data);
|
|
for (i = 0; i < DEV_BSIZE; i += 2) {
|
|
char temp;
|
|
temp = tb[i];
|
|
tb[i] = tb[i + 1];
|
|
tb[i + 1] = temp;
|
|
}
|
|
bcopy (tb, &dev->sc_params, sizeof (struct ideparams));
|
|
dev->sc_sectors = dev->sc_params.idep_sectors;
|
|
dev->sc_secpercyl = dev->sc_sectors *
|
|
dev->sc_params.idep_heads;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
ideiread(ide, block, buf, nblks)
|
|
struct ide_softc *ide;
|
|
long block;
|
|
u_char *buf;
|
|
int nblks;
|
|
{
|
|
int cylin, head, sector;
|
|
int stat;
|
|
u_short *bufp = (u_short *) buf;
|
|
int i;
|
|
struct idec_softc *idec = (void *) ide->sc_dev.dv_parent;
|
|
ide_regmap_p regs = idec->sc_cregs;
|
|
|
|
cylin = block / ide->sc_secpercyl;
|
|
head = (block % ide->sc_secpercyl) / ide->sc_sectors;
|
|
sector = block % ide->sc_sectors + 1;
|
|
stat = idecommand(ide, cylin, head, sector, nblks, IDEC_READ);
|
|
if (stat != 0)
|
|
return (-1);
|
|
while (nblks--) {
|
|
if (wait_for_drq(idec) != 0)
|
|
return (-1);
|
|
for (i = 0; i < DEV_BSIZE / 2 / 16; ++i) {
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
*bufp++ = regs->ide_data;
|
|
}
|
|
}
|
|
idec->sc_stat[0] = 0;
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
ideiwrite(ide, block, buf, nblks)
|
|
struct ide_softc *ide;
|
|
long block;
|
|
u_char *buf;
|
|
int nblks;
|
|
{
|
|
int cylin, head, sector;
|
|
int stat;
|
|
u_short *bufp = (u_short *) buf;
|
|
int i;
|
|
struct idec_softc *idec = (void *) ide->sc_dev.dv_parent;
|
|
ide_regmap_p regs = idec->sc_cregs;
|
|
|
|
cylin = block / ide->sc_secpercyl;
|
|
head = (block % ide->sc_secpercyl) / ide->sc_sectors;
|
|
sector = block % ide->sc_sectors + 1;
|
|
stat = idecommand(ide, cylin, head, sector, nblks, IDEC_WRITE);
|
|
if (stat != 0)
|
|
return (-1);
|
|
while (nblks--) {
|
|
if (wait_for_drq(idec) != 0)
|
|
return (-1);
|
|
for (i = 0; i < DEV_BSIZE / 2 / 16; ++i) {
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
regs->ide_data = *bufp++;
|
|
}
|
|
if (wait_for_unbusy(idec) != 0)
|
|
printf ("ideiwrite: timeout waiting for unbusy\n");
|
|
}
|
|
idec->sc_stat[0] = 0;
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
ideicmd(dev, target, cbuf, clen, buf, len)
|
|
struct idec_softc *dev;
|
|
int target;
|
|
void *cbuf;
|
|
int clen;
|
|
void *buf;
|
|
int len;
|
|
{
|
|
struct ide_softc *ide;
|
|
int i;
|
|
int lba;
|
|
int nblks;
|
|
struct scsipi_inquiry_data *inqbuf;
|
|
struct {
|
|
struct scsi_mode_header header;
|
|
struct scsi_blk_desc blk_desc;
|
|
union scsi_disk_pages pages;
|
|
} *mdsnbuf;
|
|
|
|
#ifdef DEBUG
|
|
if (ide_debug > 1)
|
|
printf ("ideicmd: target %d cmd %02x\n", target,
|
|
*((u_char *)cbuf));
|
|
#endif
|
|
if (target > 1)
|
|
return (-1); /* invalid unit */
|
|
|
|
ide = &dev->sc_ide[target];
|
|
if ((ide->sc_flags & IDEF_ALIVE) == 0)
|
|
return (-1);
|
|
|
|
if (*((u_char *)cbuf) != REQUEST_SENSE)
|
|
ide->sc_error = 0;
|
|
switch (*((u_char *)cbuf)) {
|
|
case TEST_UNIT_READY:
|
|
dev->sc_stat[0] = 0;
|
|
return (0);
|
|
|
|
case INQUIRY:
|
|
dev->sc_stat[0] = idegetctlr(ide);
|
|
if (dev->sc_stat[0] != 0)
|
|
return (dev->sc_stat[0]);
|
|
inqbuf = (void *) buf;
|
|
bzero (buf, len);
|
|
inqbuf->device = 0; /* XXX fixed disk */
|
|
inqbuf->dev_qual2 = 0; /* XXX check RMB */
|
|
inqbuf->version = 2;
|
|
inqbuf->response_format = 2;
|
|
inqbuf->additional_length = 31;
|
|
for (i = 0; i < 8; ++i)
|
|
inqbuf->vendor[i] = ide->sc_params.idep_model[i];
|
|
for (i = 0; i < 16; ++i)
|
|
inqbuf->product[i] = ide->sc_params.idep_model[i+8];
|
|
for (i = 0; i < 4; ++i)
|
|
inqbuf->revision[i] = ide->sc_params.idep_rev[i];
|
|
return (0);
|
|
|
|
case READ_CAPACITY:
|
|
*((long *)buf) = ide->sc_params.idep_sectors *
|
|
ide->sc_params.idep_heads *
|
|
ide->sc_params.idep_fixedcyl - 1;
|
|
*((long *)buf + 1) = 512; /* XXX 512 byte blocks */
|
|
dev->sc_stat[0] = 0;
|
|
return (0);
|
|
|
|
case READ_BIG:
|
|
lba = *((long *)(cbuf + 2));
|
|
nblks = *((u_short *)(cbuf + 7));
|
|
return (ideiread(ide, lba, buf, nblks));
|
|
|
|
case SCSI_READ_COMMAND:
|
|
lba = *((long *)cbuf) & 0x001fffff;
|
|
nblks = *((u_char *)(cbuf + 4));
|
|
if (nblks == 0)
|
|
nblks = 256;
|
|
return (ideiread(ide, lba, buf, nblks));
|
|
|
|
case WRITE_BIG:
|
|
lba = *((long *)(cbuf + 2));
|
|
nblks = *((u_short *)(cbuf + 7));
|
|
return (ideiwrite(ide, lba, buf, nblks));
|
|
|
|
case SCSI_WRITE_COMMAND:
|
|
lba = *((long *)cbuf) & 0x001fffff;
|
|
nblks = *((u_char *)(cbuf + 4));
|
|
if (nblks == 0)
|
|
nblks = 256;
|
|
return (ideiwrite(ide, lba, buf, nblks));
|
|
|
|
case PREVENT_ALLOW:
|
|
case START_STOP: /* and LOAD */
|
|
dev->sc_stat[0] = 0;
|
|
return (0);
|
|
|
|
case SCSI_MODE_SENSE:
|
|
mdsnbuf = (void*) buf;
|
|
bzero(buf, *((u_char *)cbuf + 4));
|
|
switch (*((u_char *)cbuf + 2) & 0x3f) {
|
|
case 4:
|
|
mdsnbuf->header.data_length = 27;
|
|
mdsnbuf->header.blk_desc_len = 8;
|
|
mdsnbuf->blk_desc.blklen[1] = 512 >> 8;
|
|
mdsnbuf->pages.rigid_geometry.pg_code = 4;
|
|
mdsnbuf->pages.rigid_geometry.pg_length = 16;
|
|
_lto3b(ide->sc_params.idep_fixedcyl,
|
|
mdsnbuf->pages.rigid_geometry.ncyl);
|
|
mdsnbuf->pages.rigid_geometry.nheads =
|
|
ide->sc_params.idep_heads;
|
|
dev->sc_stat[0] = 0;
|
|
return (0);
|
|
default:
|
|
printf ("ide: mode sense page %x not simulated\n",
|
|
*((u_char *)cbuf + 2) & 0x3f);
|
|
return (-1);
|
|
}
|
|
|
|
case REQUEST_SENSE:
|
|
/* convert sc_error to SCSI sense */
|
|
bzero (buf, *((u_char *)cbuf + 4));
|
|
*((u_char *) buf) = 0x70;
|
|
*((u_char *) buf + 7) = 10;
|
|
i = 0;
|
|
while (sense_convert[i].ide_err) {
|
|
if (sense_convert[i].ide_err & ide->sc_error)
|
|
break;
|
|
++i;
|
|
}
|
|
*((u_char *) buf + 2) = sense_convert[i].scsi_sense_key;
|
|
*((u_char *) buf + 12) = sense_convert[i].scsi_sense_qual;
|
|
dev->sc_stat[0] = 0;
|
|
printf("ide: request sense %02x -> %02x %02x\n", ide->sc_error,
|
|
sense_convert[i].scsi_sense_key, sense_convert[i].scsi_sense_qual);
|
|
return (0);
|
|
|
|
case 0x01 /*REWIND*/:
|
|
case 0x04 /*CMD_FORMAT_UNIT*/:
|
|
case 0x05 /*READ_BLOCK_LIMITS*/:
|
|
case SCSI_REASSIGN_BLOCKS:
|
|
case 0x10 /*WRITE_FILEMARKS*/:
|
|
case 0x11 /*SPACE*/:
|
|
case SCSI_MODE_SELECT:
|
|
default:
|
|
printf ("ide: unhandled SCSI command %02x\n", *((u_char *)cbuf));
|
|
ide->sc_error = 0x04;
|
|
dev->sc_stat[0] = SCSI_CHECK;
|
|
return (SCSI_CHECK);
|
|
}
|
|
}
|
|
|
|
int
|
|
idego(dev, xs)
|
|
struct idec_softc *dev;
|
|
struct scsipi_xfer *xs;
|
|
{
|
|
struct ide_softc *ide = &dev->sc_ide[xs->sc_link->scsipi_scsi.target];
|
|
long lba;
|
|
int nblks;
|
|
|
|
#if 0
|
|
cdb->cdb[1] |= unit << 5;
|
|
#endif
|
|
|
|
ide->sc_buf = xs->data;
|
|
ide->sc_bcount = xs->datalen;
|
|
#ifdef DEBUG
|
|
if (ide_debug > 1)
|
|
printf ("ide_go: %02x\n", xs->cmd->opcode);
|
|
#endif
|
|
if (xs->cmd->opcode != SCSI_READ_COMMAND && xs->cmd->opcode != READ_BIG &&
|
|
xs->cmd->opcode != SCSI_WRITE_COMMAND && xs->cmd->opcode != WRITE_BIG) {
|
|
ideicmd (dev, xs->sc_link->scsipi_scsi.target, xs->cmd, xs->cmdlen,
|
|
xs->data, xs->datalen);
|
|
return (1);
|
|
}
|
|
switch (xs->cmd->opcode) {
|
|
case SCSI_READ_COMMAND:
|
|
case SCSI_WRITE_COMMAND:
|
|
lba = *((long *)xs->cmd) & 0x001fffff;
|
|
nblks = xs->cmd->bytes[3];
|
|
if (nblks == 0)
|
|
nblks = 256;
|
|
break;
|
|
case READ_BIG:
|
|
case WRITE_BIG:
|
|
lba = *((long *)&xs->cmd->bytes[1]);
|
|
nblks = *((short *)&xs->cmd->bytes[6]);
|
|
break;
|
|
default:
|
|
panic ("idego bad SCSI command");
|
|
}
|
|
ide->sc_blknum = lba;
|
|
ide->sc_blkcnt = nblks;
|
|
ide->sc_skip = ide->sc_mskip = 0;
|
|
dev->sc_flags &= ~IDECF_READ;
|
|
if (xs->cmd->opcode == SCSI_READ_COMMAND || xs->cmd->opcode == READ_BIG)
|
|
dev->sc_flags |= IDECF_READ;
|
|
dev->sc_cur = ide;
|
|
return (idestart (dev));
|
|
}
|
|
|
|
int
|
|
idestart(dev)
|
|
struct idec_softc *dev;
|
|
{
|
|
long blknum, cylin, head, sector;
|
|
int command, count;
|
|
struct ide_softc *ide = dev->sc_cur;
|
|
short *bf;
|
|
int i;
|
|
ide_regmap_p regs = dev->sc_cregs;
|
|
|
|
dev->sc_flags |= IDECF_ACTIVE;
|
|
blknum = ide->sc_blknum + ide->sc_skip;
|
|
if (ide->sc_mskip == 0) {
|
|
ide->sc_mbcount = ide->sc_bcount;
|
|
}
|
|
cylin = blknum / ide->sc_secpercyl;
|
|
head = (blknum % ide->sc_secpercyl) / ide->sc_sectors;
|
|
sector = blknum % ide->sc_sectors;
|
|
++sector;
|
|
if (ide->sc_mskip == 0 || dev->sc_flags & IDECF_SINGLE) {
|
|
count = howmany(ide->sc_mbcount, DEV_BSIZE);
|
|
command = (dev->sc_flags & IDECF_READ) ?
|
|
IDEC_READ : IDEC_WRITE;
|
|
if (idecommand(ide, cylin, head, sector, count, command) != 0) {
|
|
printf ("idestart: timeout waiting for unbusy\n");
|
|
#if 0
|
|
bp->b_error = EINVAL;
|
|
bp->b_flags |= B_ERROR;
|
|
idfinish(&dev->sc_ide[0], bp);
|
|
#endif
|
|
ide_scsidone(dev, dev->sc_stat[0]);
|
|
return (1);
|
|
}
|
|
}
|
|
dev->sc_stat[0] = 0;
|
|
if (dev->sc_flags & IDECF_READ)
|
|
return (0);
|
|
if (wait_for_drq(dev) < 0) {
|
|
printf ("idestart: timeout waiting for drq\n");
|
|
}
|
|
#define W1 (regs->ide_data = *bf++)
|
|
for (i = 0, bf = (short *) (ide->sc_buf + ide->sc_skip * DEV_BSIZE);
|
|
i < DEV_BSIZE / 2 / 16; ++i) {
|
|
W1; W1; W1; W1; W1; W1; W1; W1;
|
|
W1; W1; W1; W1; W1; W1; W1; W1;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
|
|
int
|
|
idesc_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct idec_softc *dev = arg;
|
|
ide_regmap_p regs;
|
|
struct ide_softc *ide;
|
|
short dummy;
|
|
short *bf;
|
|
int i;
|
|
|
|
regs = dev->sc_cregs;
|
|
if (dev->sc_flags & IDECF_A1200) {
|
|
if (*dev->sc_a1200 & 0x80) {
|
|
#if 0
|
|
printf ("idesc_intr: A1200 interrupt %x\n", *dev->sc_a1200);
|
|
#endif
|
|
dummy = regs->ide_status; /* XXX */
|
|
*dev->sc_a1200 = 0x7c | (*dev->sc_a1200 & 0x03);
|
|
}
|
|
else
|
|
return (0);
|
|
} else {
|
|
if (regs->ide_intpnd >= 0)
|
|
return (0);
|
|
dummy = regs->ide_status;
|
|
}
|
|
#ifdef DEBUG
|
|
if (ide_debug)
|
|
printf ("idesc_intr: %02x\n", dummy);
|
|
#endif
|
|
if ((dev->sc_flags & IDECF_ACTIVE) == 0)
|
|
return (1);
|
|
dev->sc_flags &= ~IDECF_ACTIVE;
|
|
if (wait_for_unbusy(dev) < 0)
|
|
printf ("idesc_intr: timeout waiting for unbusy\n");
|
|
ide = dev->sc_cur;
|
|
if (dummy & IDES_ERR) {
|
|
dev->sc_stat[0] = SCSI_CHECK;
|
|
ide->sc_error = regs->ide_error;
|
|
printf("idesc_intr: error %02x, %02x\n", dev->sc_stat[1], dummy);
|
|
ide_scsidone(dev, dev->sc_stat[0]);
|
|
}
|
|
if (dev->sc_flags & IDECF_READ) {
|
|
#define R2 (*bf++ = regs->ide_data)
|
|
bf = (short *) (ide->sc_buf + ide->sc_skip * DEV_BSIZE);
|
|
if (wait_for_drq(dev) != 0)
|
|
printf ("idesc_intr: read error detected late\n");
|
|
for (i = 0; i < DEV_BSIZE / 2 / 16; ++i) {
|
|
R2; R2; R2; R2; R2; R2; R2; R2;
|
|
R2; R2; R2; R2; R2; R2; R2; R2;
|
|
}
|
|
}
|
|
ide->sc_skip++;
|
|
ide->sc_mskip++;
|
|
ide->sc_bcount -= DEV_BSIZE;
|
|
ide->sc_mbcount -= DEV_BSIZE;
|
|
#ifdef DEBUG
|
|
if (ide_debug)
|
|
printf ("idesc_intr: sc_bcount %ld\n", ide->sc_bcount);
|
|
#endif
|
|
if (ide->sc_bcount == 0)
|
|
ide_scsidone(dev, dev->sc_stat[0]);
|
|
else
|
|
/* Check return value here? */
|
|
idestart (dev);
|
|
return (1);
|
|
}
|