342 lines
17 KiB
C
342 lines
17 KiB
C
/* $NetBSD: ts102reg.h,v 1.4 1999/12/15 08:12:31 garbled Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Matt Thomas.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
#ifndef _SPARC_DEV_TS102REG_H
|
|
#define _SPARC_DEV_TS102REG_H
|
|
|
|
/* The TS102 consumes a 256MB region of the SPARCbook 3's address space.
|
|
*/
|
|
#define TS102_OFFSET_REGISTERS 0x02000000
|
|
#define TS102_OFFSET_CARD_A_ATTR_SPACE 0x04000000
|
|
#define TS102_OFFSET_CARD_B_ATTR_SPACE 0x05000000
|
|
#define TS102_SIZE_ATTR_SPACE 0x01000000
|
|
#define TS102_OFFSET_CARD_A_IO_SPACE 0x06000000
|
|
#define TS102_OFFSET_CARD_B_IO_SPACE 0x07000000
|
|
#define TS102_SIZE_IO_SPACE 0x01000000
|
|
#define TS102_OFFSET_CARD_A_MEM_SPACE 0x08000000
|
|
#define TS102_OFFSET_CARD_B_MEM_SPACE 0x0c000000
|
|
#define TS102_SIZE_MEM_SPACE 0x04000000
|
|
|
|
/* There are two separate register blocks within the TS102. The first
|
|
* gives access to PCMCIA card specific resources, and the second gives
|
|
* access to the microcontroller interface
|
|
*/
|
|
#define TS102_REG_CARD_A_INT 0x0000 /* Card A Interrupt Register */
|
|
#define TS102_REG_CARD_A_STS 0x0004 /* Card A Status Register */
|
|
#define TS102_REG_CARD_A_CTL 0x0008 /* Card A Control Register */
|
|
#define TS102_REG_CARD_B_INT 0x0010 /* Card B Interrupt Register */
|
|
#define TS102_REG_CARD_B_STS 0x0014 /* Card B Status Register */
|
|
#define TS102_REG_CARD_B_CTL 0x0018 /* Card B Control Register */
|
|
#define TS102_REG_UCTRL_INT 0x0020 /* Microcontroller Interrupt Register */
|
|
#define TS102_REG_UCTRL_DATA 0x0024 /* Microcontroller Data Register */
|
|
#define TS102_REG_UCTRL_STS 0x0028 /* Microcontroller Status Register */
|
|
|
|
/* TS102 Card Interrupt Register defintions.
|
|
*
|
|
* There is one 16-bit interrupt register for each card. Each register
|
|
* contains interrupt status (read) and clear (write) bits and an
|
|
* interrupt mask for each of the four interrupt sources.
|
|
*
|
|
* The request bit is the logical AND of the status and the mask bit,
|
|
* and indicated and an interrupt is being requested. The mask bits
|
|
* allow masking of individual interrupts. An interrupt is enabled when
|
|
* the mask is set to 1 and is clear by write a 1 to the associated
|
|
* request bit.
|
|
*
|
|
* The card interrupt register also contain the soft reset flag.
|
|
* Setting this bit to 1 will the SPARCbook 3 to be reset.
|
|
*/
|
|
#define TS102_CARD_INT_RQST_IRQ 0x0001
|
|
#define TS102_CARD_INT_RQST_WP_STATUS_CHANGED 0x0002
|
|
#define TS102_CARD_INT_RQST_BATTERY_STATUS_CHANGED 0x0004
|
|
#define TS102_CARD_INT_RQST_CARDDETECT_STATUS_CHANGED 0x0008
|
|
#define TS102_CARD_INT_STATUS_IRQ 0x0010
|
|
#define TS102_CARD_INT_STATUS_WP_STATUS_CHANGED 0x0020
|
|
#define TS102_CARD_INT_STATUS_BATTERY_STATUS_CHANGED 0x0040
|
|
#define TS102_CARD_INT_STATUS_CARDDETECT_STATUS_CHANGED 0x0080
|
|
#define TS102_CARD_INT_MASK_IRQ 0x0100
|
|
#define TS102_CARD_INT_MASK_WP_STATUS 0x0200
|
|
#define TS102_CARD_INT_MASK_BATTERY_STATUS 0x0400
|
|
#define TS102_CARD_INT_MASK_CARDDETECT_STATUS 0x0800
|
|
#define TS102_CARD_INT_SOFT_RESET 0x1000
|
|
|
|
/* TS102 Card Status Register definitions. The Card Status Register
|
|
* contains card status and control bit.
|
|
*/
|
|
#define TS102_CARD_STS_PRES 0x0001 /* Card Present (1) */
|
|
#define TS102_CARD_STS_IO 0x0002 /* (1) I/O Card, (0) = Mem Card */
|
|
#define TS102_CARD_STS_TYPE3 0x0004 /* Type-3 PCMCIA card (disk) */
|
|
#define TS102_CARD_STS_VCC 0x0008 /* Vcc (0=5V, 1=3.3V) */
|
|
#define TS102_CARD_STS_VPP1_MASK 0x0030 /* Programming Voltage Control2 */
|
|
#define TS102_CARD_STS_VPP1_NC 0x0030 /* NC */
|
|
#define TS102_CARD_STS_VPP1_VCC 0x0020 /* Vcc (3.3V or 5V) */
|
|
#define TS102_CARD_STS_VPP1_VPP 0x0010 /* Vpp (12V) */
|
|
#define TS102_CARD_STS_VPP1_0V 0x0000 /* 0V */
|
|
#define TS102_CARD_STS_VPP2_MASK 0x00c0 /* Programming Voltage Control1 */
|
|
#define TS102_CARD_STS_VPP2_NC 0x00c0 /* NC */
|
|
#define TS102_CARD_STS_VPP2_VCC 0x0080 /* Vcc (3.3V or 5V) */
|
|
#define TS102_CARD_STS_VPP2_VPP 0x0040 /* Vpp (12V) */
|
|
#define TS102_CARD_STS_VPP2_0V 0x0000 /* 0V */
|
|
#define TS102_CARD_STS_WP 0x0100 /* Write Protect (1) */
|
|
#define TS102_CARD_STS_BVD_MASK 0x0600 /* Battery Voltage Detect */
|
|
#define TS102_CARD_STS_BVD_GOOD 0x0600 /* Battery good */
|
|
#define TS102_CARD_STS_BVD_LOW_OK 0x0400 /* Battery low, data OK */
|
|
#define TS102_CARD_STS_BVD_LOW_SUSPECT1 0x0200 /* Battery low, data suspect */
|
|
#define TS102_CARD_STS_BVD_LOW_SUSPECT0 0x0000 /* Battery low, data suspect */
|
|
#define TS102_CARD_STS_LVL 0x0800 /* Level (1) / Edge */
|
|
#define TS102_CARD_STS_RDY 0x1000 /* Ready (1) / Not Busy */
|
|
#define TS102_CARD_STS_VCCEN 0x2000 /* Powered Up (0) */
|
|
#define TS102_CARD_STS_RIEN 0x4000 /* Not Supported */
|
|
#define TS102_CARD_STS_ACEN 0x8000 /* Access Enabled (1) */
|
|
|
|
/* TS102 Card Control Register definitions
|
|
*/
|
|
#define TS102_CARD_CTL_AA_MASK 0x0003 /* Attribute Address A[25:24] */
|
|
#define TS102_CARD_CTL_IA_MASK 0x000c /* I/O Address A[25:24] */
|
|
#define TS102_CARD_CTL_IA_BITPOS 2 /* */
|
|
#define TS102_CARD_CTL_CES_MASK 0x0070 /* CE/address setup time */
|
|
#define TS102_CARD_CTL_CES_BITPOS 4 /* n+1 clocks */
|
|
#define TS102_CARD_CTL_OWE_MASK 0x0380 /* OE/WE width */
|
|
#define TS102_CARD_CTL_OWE_BITPOS 7 /* n+2 clocks */
|
|
#define TS102_CARD_CTL_CEH 0x0400 /* Chip enable hold time */
|
|
/* (0) - 1 clock */
|
|
/* (1) - 2 clocks */
|
|
#define TS102_CARD_CTL_SBLE 0x0800 /* SBus little endian */
|
|
#define TS102_CARD_CTL_PCMBE 0x1000 /* PCMCIA big endian */
|
|
#define TS102_CARD_CTL_RAHD 0x2000 /* Read ahead enable */
|
|
#define TS102_CARD_CTL_INCDIS 0x4000 /* Address increment disable */
|
|
#define TS102_CARD_CTL_PWRD 0x8000 /* Power down */
|
|
|
|
/* Microcontroller Interrupt Register
|
|
*/
|
|
#define TS102_UCTRL_INT_TXE_REQ 0x01 /* transmit FIFO empty */
|
|
#define TS102_UCTRL_INT_TXNF_REQ 0x02 /* transmit FIFO not full */
|
|
#define TS102_UCTRL_INT_RXNE_REQ 0x04 /* receive FIFO not empty */
|
|
#define TS102_UCTRL_INT_RXO_REQ 0x08 /* receive FIFO overflow */
|
|
#define TS102_UCTRL_INT_TXE_MSK 0x10 /* transmit FIFO empty */
|
|
#define TS102_UCTRL_INT_TXNF_MSK 0x20 /* transmit FIFO not full */
|
|
#define TS102_UCTRL_INT_RXNE_MSK 0x40 /* receive FIFO not empty */
|
|
#define TS102_UCTRL_INT_RXO_MSK 0x80 /* receive FIFO overflow */
|
|
|
|
/* TS102 Microcontroller Data Register (only 8 bits are significant).
|
|
*/
|
|
#define TS102_UCTRL_DATA_MASK 0xff
|
|
|
|
/* TS102 Microcontroller Status Register.
|
|
* read 1 if asserted
|
|
* write 1 to clear
|
|
*/
|
|
#define TS102_UCTRL_STS_TXE_STA 0x01 /* transmit FIFO empty */
|
|
#define TS102_UCTRL_STS_TXNF_STA 0x02 /* transmit FIFO not full */
|
|
#define TS102_UCTRL_STS_RXNE_STA 0x04 /* receive FIFO not empty */
|
|
#define TS102_UCTRL_STS_RXO_STA 0x08 /* receive FIFO overflow */
|
|
|
|
enum ts102_opcode { /* Argument Returned */
|
|
TS102_OP_RD_SERIAL_NUM=0x01, /* none ack + 4 bytes */
|
|
TS102_OP_RD_ETHER_ADDR=0x02, /* none ack + 6 bytes */
|
|
TS102_OP_RD_HW_VERSION=0x03, /* none ack + 2 bytes */
|
|
TS102_OP_RD_UCTLR_VERSION=0x04, /* none ack + 2 bytes */
|
|
TS102_OP_RD_MAX_TEMP=0x05, /* none ack + 1 bytes */
|
|
TS102_OP_RD_MIN_TEMP=0x06, /* none ack + 1 bytes */
|
|
TS102_OP_RD_CURRENT_TEMP=0x07, /* none ack + 1 bytes */
|
|
TS102_OP_RD_SYSTEM_VARIANT=0x08, /* none ack + 4 bytes */
|
|
TS102_OP_RD_POWERON_CYCLES=0x09, /* none ack + 4 bytes */
|
|
TS102_OP_RD_POWERON_SECONDS=0x0a, /* none ack + 4 bytes */
|
|
TS102_OP_RD_RESET_STATUS=0x0b, /* none ack + 1 bytes */
|
|
#define TS102_RESET_STATUS_RESERVED0 0x00
|
|
#define TS102_RESET_STATUS_POWERON 0x01
|
|
#define TS102_RESET_STATUS_KEYBOARD 0x02
|
|
#define TS102_RESET_STATUS_WATCHDOG 0x03
|
|
#define TS102_RESET_STATUS_TIMEOUT 0x04
|
|
#define TS102_RESET_STATUS_SOFTWARE 0x05
|
|
#define TS102_RESET_STATUS_BROWNOUT 0x06
|
|
#define TS102_RESET_STATUS_RESERVED1 0x07
|
|
TS102_OP_RD_EVENT_STATUS=0x0c, /* none ack + 2 bytes */
|
|
#define TS102_EVENT_STATUS_SHUTDOWN_REQUEST 0x0001
|
|
#define TS102_EVENT_STATUS_LOW_POWER_WARNING 0x0002
|
|
#define TS102_EVENT_STATUS_VERY_LOW_POWER_WARNING 0x0004
|
|
#define TS102_EVENT_STATUS_BATT_CHANGED 0x0008
|
|
#define TS102_EVENT_STATUS_EXT_KEYBOARD_STATUS_CHANGE 0x0010
|
|
#define TS102_EVENT_STATUS_EXT_MOUSE_STATUS_CHANGE 0x0020
|
|
#define TS102_EVENT_STATUS_EXTERNAL_VGA_STATUS_CHANGE 0x0040
|
|
#define TS102_EVENT_STATUS_LID_STATUS_CHANGE 0x0080
|
|
#define TS102_EVENT_STATUS_MICROCONTROLLER_ERROR 0x0100
|
|
#define TS102_EVENT_STATUS_RESERVED 0x0200
|
|
#define TS102_EVENT_STATUS_EXT_BATT_STATUS_CHANGE 0x0400
|
|
#define TS102_EVENT_STATUS_EXT_BATT_CHARGING_STATUS_CHANGE 0x0800
|
|
#define TS102_EVENT_STATUS_EXT_BATT_LOW_POWER 0x1000
|
|
#define TS102_EVENT_STATUS_DC_STATUS_CHANGE 0x2000
|
|
#define TS102_EVENT_STATUS_CHARGING_STATUS_CHANGE 0x4000
|
|
#define TS102_EVENT_STATUS_POWERON_BTN_PRESSED 0x8000
|
|
TS102_OP_RD_REAL_TIME_CLK=0x0d, /* none ack + 7 bytes */
|
|
TS102_OP_RD_EXT_VGA_PORT=0x0e, /* none ack + 1 bytes */
|
|
TS102_OP_RD_UCTRL_ROM_CKSUM=0x0f, /* none ack + 2 bytes */
|
|
TS102_OP_RD_ERROR_STATUS=0x10, /* none ack + 2 bytes */
|
|
#define TS102_ERROR_STATUS_NO_ERROR 0x00
|
|
#define TS102_ERROR_STATUS_COMMAND_ERROR 0x01
|
|
#define TS102_ERROR_STATUS_EXECUTION_ERROR 0x02
|
|
#define TS102_ERROR_STATUS_PHYSICAL_ERROR 0x04
|
|
TS102_OP_RD_EXT_STATUS=0x11, /* none ack + 2 bytes */
|
|
#define TS102_EXT_STATUS_MAIN_POWER_AVAILABLE 0x0001
|
|
#define TS102_EXT_STATUS_INTERNAL_BATTERY_ATTACHED 0x0002
|
|
#define TS102_EXT_STATUS_EXTERNAL_BATTERY_ATTACHED 0x0004
|
|
#define TS102_EXT_STATUS_EXTERNAL_VGA_ATTACHED 0x0008
|
|
#define TS102_EXT_STATUS_EXTERNAL_KEYBOARD_ATTACHED 0x0010
|
|
#define TS102_EXT_STATUS_EXTERNAL_MOUSE_ATTACHED 0x0020
|
|
#define TS102_EXT_STATUS_LID_DOWN 0x0040
|
|
#define TS102_EXT_STATUS_INTERNAL_BATTERY_CHARGING 0x0080
|
|
#define TS102_EXT_STATUS_EXTERNAL_BATTERY_CHARGING 0x0100
|
|
#define TS102_EXT_STATUS_INTERNAL_BATTERY_DISCHARGING 0x0200
|
|
#define TS102_EXT_STATUS_EXTERNAL_BATTERY_DISCHARGING 0x0400
|
|
TS102_OP_RD_USER_CONFIG=0x12, /* none ack + 2 bytes */
|
|
TS102_OP_RD_UCTRL_VLT=0x13, /* none ack + 1 bytes */
|
|
TS102_OP_RD_INT_BATT_VLT=0x14, /* none ack + 1 bytes */
|
|
TS102_OP_RD_DC_IN_VLT=0x15, /* none ack + 1 bytes */
|
|
TS102_OP_RD_HORZ_PRT_VLT=0x16, /* none ack + 1 bytes */
|
|
TS102_OP_RD_VERT_PTR_VLT=0x17, /* none ack + 1 bytes */
|
|
TS102_OP_RD_INT_CHARGE_RATE=0x18, /* none ack + 1 bytes */
|
|
TS102_OP_RD_EXT_CHARGE_RATE=0x19, /* none ack + 1 bytes */
|
|
TS102_OP_RD_RTC_ALARM=0x1a, /* none ack + 7 bytes */
|
|
TS102_OP_RD_EVENT_STATUS_NO_RESET=0x1b, /* none ack + 2 bytes */
|
|
TS102_OP_RD_INT_KBD_LAYOUT=0x1c, /* none ack + 2 bytes */
|
|
TS102_OP_RD_EXT_KBD_LAYOUT=0x1d, /* none ack + 2 bytes */
|
|
TS102_OP_RD_EEPROM_STATUS=0x1e, /* none ack + 2 bytes */
|
|
#define TS102_EEPROM_STATUS_FACTORY_AREA_CHECKSUM_FAIL 0x01
|
|
#define TS102_EEPROM_STATUS_CONSUMER_AREA_CHECKSUM_FAIL 0x02
|
|
#define TS102_EEPROM_STATUS_USER_AREA_CHECKSUM_FAIL 0x04
|
|
#define TS102_EEPROM_STATUS_VPD_AREA_CHECKSUM_FAIL 0x08
|
|
|
|
/* Read/Write/Modify Commands
|
|
*/
|
|
TS102_OP_CTL_LCD=0x20, /* mask ack + 2 bytes */
|
|
#define TS102_LCD_CAPS_LOCK 0x0001
|
|
#define TS102_LCD_SCROLL_LOCK 0x0002
|
|
#define TS102_LCD_NUMLOCK 0x0004
|
|
#define TS102_LCD_DISK_ACTIVE 0x0008
|
|
#define TS102_LCD_LAN_ACTIVE 0x0010
|
|
#define TS102_LCD_WAN_ACTIVE 0x0020
|
|
#define TS102_LCD_PCMCIA_ACTIVE 0x0040
|
|
#define TS102_LCD_DC_OK 0x0080
|
|
#define TS102_LCD_COMPOSE 0x0100
|
|
TS102_OP_CTL_BITPORT=0x21, /* mask ack + 1 byte */
|
|
#define TS102_BITPORT_TFTPWR 0x01 /* TFT power (low) */
|
|
#define TS102_BITPORT_SYNCINVA 0x04 /* ext. monitor sync (low) */
|
|
#define TS102_BITPORT_SYNCINVB 0x08 /* ext. monitor sync (low) */
|
|
#define TS102_BITPORT_BP_DIS 0x10 /* no bootprom from pcmcia (high) */
|
|
/* boot from pcmcia (low */
|
|
#define TS102_BITPORT_ENCSYNC 0x20 /* enab composite sync (low) */
|
|
TS102_OP_CTL_DEV=0x22, /* undocumented mask ack + 1 byte */
|
|
#define TS102_DEVCTL_CHARGE_DISABLE 0x01 /* dis/en charging */
|
|
#define TS102_DEVCTL_POINTER_DISABLE 0x04 /* dis/en pointer */
|
|
#define TS102_DEVCTL_KEYCLICK 0x08 /* keyclick? */
|
|
#define TS102_DEVCTL_INT_BTNCLICK 0x10 /* internal button click? */
|
|
#define TS102_DEVCTL_EXT_BTNCLICK 0x20 /* ext. button click?? */
|
|
TS102_OP_CTL_SPEAKER_VOLUME=0x23, /* mask ack + 1 byte */
|
|
TS102_OP_CTL_TFT_BIRGHNESS=0x24, /* mask ack + 1 byte */
|
|
TS102_OP_CTL_WATCHDOG=0x25, /* mask ack + 1 byte */
|
|
TS102_OP_CTL_FCTRY_EEPROM=0x26, /* mask ack + 1 byte */
|
|
TS102_OP_CTL_SECURITY_KEY=0x27, /* no idea */
|
|
TS102_OP_CTL_KDB_TIME_UNTL_RTP=0x28, /* mask ack + 1 byte */
|
|
TS102_OP_CTL_KBD_TIME_BTWN_RPTS=0x29, /* mask ack + 1 byte */
|
|
TS102_OP_CTL_TIMEZONE=0x2a, /* mask ack + 1 byte */
|
|
TS102_OP_CTL_MARK_SPACE_RATIO=0x2b, /* mask ack + 1 byte */
|
|
TS102_OP_CTL_MOUSE_SENS=0x2c, /* no idea */
|
|
TS102_OP_CTL_MOUSE_SCAN=0x2d, /* no idea */
|
|
TS102_OP_CTL_DIAGNOSTIC_MODE=0x2e, /* mask ack + 1 byte */
|
|
#define TS102_DIAGNOSTIC_MODE_CMD_DIAG_ON_LCD 0x01
|
|
#define TS102_DIAGNOSTIC_MODE_KDB_MS_9600 0x02
|
|
TS102_OP_CTL_SCREEN_CONTRAST=0x2f, /* mask ack + 1 byte */
|
|
|
|
/* Commands returning no status
|
|
*/
|
|
TS102_OP_CMD_RING_BELL=0x30, /* msb,lsb ack */
|
|
TS102_OP_RD_INPUT_SOURCE=0x31, /* no idea */
|
|
TS102_OP_CMD_DIAGNOSTIC_STATUS=0x32, /* msb,lsb ack */
|
|
TS102_OP_CMD_CLR_KEY_COMBO_TBL=0x33, /* none ack */
|
|
TS102_OP_CMD_SOFTWARE_RESET=0x34, /* none ack */
|
|
TS102_OP_CMD_SET_RTC=0x35, /* smhddmy ack */
|
|
TS102_OP_CMD_RECAL_PTR=0x36, /* none ack */
|
|
TS102_OP_CMD_SET_BELL_FREQ=0x37, /* msb,lsb ack */
|
|
TS102_OP_CMD_SET_INT_BATT_RATE=0x39, /* charge-lvl ack */
|
|
TS102_OP_CMD_SET_EXT_BATT_RATE=0x3a, /* charge-lvl ack */
|
|
TS102_OP_CMD_SET_RTC_ALARM=0x3b, /* smhddmy ack */
|
|
|
|
/* Block transfer commands
|
|
*/
|
|
TS102_OP_BLK_RD_EEPROM=0x40, /* len off ack <data> */
|
|
TS102_OP_BLK_WR_EEPROM=0x41, /* len off <data> ack */
|
|
TS102_OP_BLK_WR_STATUS=0x42, /* len off <data> ack */
|
|
TS102_OP_BLK_DEF_SPCL_CHAR=0x43, /* len off <data> ack */
|
|
#define TS102_BLK_OFF_DEF_WAN1 0
|
|
#define TS102_BLK_OFF_DEF_WAN2 1
|
|
#define TS102_BLK_OFF_DEF_LAN1 2
|
|
#define TS102_BLK_OFF_DEF_LAN2 3
|
|
#define TS102_BLK_OFF_DEF_PCMCIA 4
|
|
#define TS102_BLK_OFF_DEF_DC_GOOD 5
|
|
#define TS102_BLK_OFF_DEF_BACKSLASH 6
|
|
|
|
/* Generic commands
|
|
*/
|
|
TS102_OP_GEN_DEF_KEY_COMBO_ENT=0x50, /* seq com-length ack */
|
|
TS102_OP_GEN_DEF_STRING_TBL_ENT=0x51, /* str-code len <str> ack */
|
|
TS102_OP_GEN_DEF_STS_CTRN_DISP=0x52, /* len <msg> ack */
|
|
|
|
/* Generic commands with optional status
|
|
*/
|
|
TS102_OP_GEN_STS_EMU_COMMAND=0x64, /* <command> ack */
|
|
TS102_OP_GEN_STS_RD_EMU_REGISTER=0x65, /* reg ack + 1 byte */
|
|
TS102_OP_GEN_STS_WR_EMU_REGISTER=0x66, /* reg,val ack */
|
|
TS102_OP_GEN_STS_RD_EMU_RAM=0x67, /* addr ack + 1 byte */
|
|
TS102_OP_GEN_STS_WR_EMU_RAM=0x68, /* addr,val ack */
|
|
TS102_OP_GEN_STS_RD_BQ_REGISTER=0x69, /* reg ack + 1 byte */
|
|
TS102_OP_GEN_STS_WR_BQ_REGISTER=0x6a, /* reg,val ack */
|
|
|
|
/* Administration commands
|
|
*/
|
|
TS102_OP_ADMIN_SET_USER_PASS=0x70, /* len <pass> ack */
|
|
TS102_OP_ADMIN_VRFY_USER_PASS=0x71, /* len <pass> ack + status */
|
|
TS102_OP_ADMIN_GET_SYSTEM_PASS=0x72, /* none ack + <7bytekey> */
|
|
TS102_OP_ADMIN_VRFY_SYSTEM_PASS=0x73, /* len <pass> ack + status */
|
|
TS102_OP_RD_INT_CHARGE_LEVEL=0x7a, /* ack + 2 byte */
|
|
TS102_OP_RD_EXT_CHARGE_LEVEL=0x7b, /* ack + 2 byte */
|
|
TS102_OP_SLEEP=0x80, /* supposedly sleeps, not sure */
|
|
TS102_OP_ADMIN_POWER_OFF=0x82, /* len <pass> none */
|
|
TS102_OP_ADMIN_POWER_RESTART=0x83, /* msb,xx,lsb none */
|
|
};
|
|
|
|
#endif /* _SPARC_DEV_TS102REG_H */
|