1926 lines
50 KiB
C
1926 lines
50 KiB
C
/* $NetBSD: fd.c,v 1.106 2013/05/24 18:24:27 christos Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Charles M. Hannum and Minoura Makoto.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*-
|
|
* Copyright (c) 1990 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Don Ahn.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)fd.c 7.4 (Berkeley) 5/25/91
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: fd.c,v 1.106 2013/05/24 18:24:27 christos Exp $");
|
|
|
|
#include "opt_ddb.h"
|
|
#include "opt_m68k_arch.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/file.h>
|
|
#include <sys/stat.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/device.h>
|
|
#include <sys/disklabel.h>
|
|
#include <sys/disk.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/bufq.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/fdio.h>
|
|
#include <sys/rnd.h>
|
|
|
|
#include <dev/cons.h>
|
|
|
|
#include <machine/cpu.h>
|
|
|
|
#include <arch/x68k/dev/intiovar.h>
|
|
#include <arch/x68k/dev/dmacvar.h>
|
|
#include <arch/x68k/dev/fdreg.h>
|
|
#include <arch/x68k/dev/opmvar.h> /* for CT1 access */
|
|
|
|
#include "locators.h"
|
|
#include "ioconf.h"
|
|
|
|
#ifdef FDDEBUG
|
|
#define DPRINTF(x) if (fddebug) printf x
|
|
int fddebug = 0;
|
|
#else
|
|
#define DPRINTF(x)
|
|
#endif
|
|
|
|
#define FDUNIT(dev) (minor(dev) / 8)
|
|
#define FDTYPE(dev) (minor(dev) % 8)
|
|
|
|
/* (mis)use device use flag to identify format operation */
|
|
#define B_FORMAT B_DEVPRIVATE
|
|
|
|
enum fdc_state {
|
|
DEVIDLE = 0,
|
|
MOTORWAIT,
|
|
DOSEEK,
|
|
SEEKWAIT,
|
|
SEEKTIMEDOUT,
|
|
SEEKCOMPLETE,
|
|
DOIO,
|
|
IOCOMPLETE,
|
|
IOTIMEDOUT,
|
|
DORESET,
|
|
RESETCOMPLETE,
|
|
RESETTIMEDOUT,
|
|
DORECAL,
|
|
RECALWAIT,
|
|
RECALTIMEDOUT,
|
|
RECALCOMPLETE,
|
|
DOCOPY,
|
|
DOIOHALF,
|
|
COPYCOMPLETE,
|
|
};
|
|
|
|
/* software state, per controller */
|
|
struct fdc_softc {
|
|
bus_space_tag_t sc_iot; /* intio i/o space identifier */
|
|
bus_space_handle_t sc_ioh; /* intio io handle */
|
|
|
|
struct callout sc_timo_ch; /* timeout callout */
|
|
struct callout sc_intr_ch; /* pseudo-intr callout */
|
|
|
|
bus_dma_tag_t sc_dmat; /* intio DMA tag */
|
|
bus_dmamap_t sc_dmamap; /* DMA map */
|
|
uint8_t *sc_addr; /* physical address */
|
|
struct dmac_channel_stat *sc_dmachan; /* intio DMA channel */
|
|
struct dmac_dma_xfer *sc_xfer; /* DMA transfer */
|
|
int sc_read;
|
|
|
|
struct fd_softc *sc_fd[4]; /* pointers to children */
|
|
TAILQ_HEAD(drivehead, fd_softc) sc_drives;
|
|
enum fdc_state sc_state;
|
|
int sc_errors; /* number of retries so far */
|
|
uint8_t sc_status[7]; /* copy of registers */
|
|
} fdc_softc;
|
|
|
|
int fdcintr(void *);
|
|
void fdcreset(struct fdc_softc *);
|
|
|
|
/* controller driver configuration */
|
|
int fdcprobe(device_t, cfdata_t, void *);
|
|
void fdcattach(device_t, device_t, void *);
|
|
int fdprint(void *, const char *);
|
|
|
|
CFATTACH_DECL_NEW(fdc, sizeof(struct fdc_softc),
|
|
fdcprobe, fdcattach, NULL, NULL);
|
|
|
|
/*
|
|
* Floppies come in various flavors, e.g., 1.2MB vs 1.44MB; here is how
|
|
* we tell them apart.
|
|
*/
|
|
struct fd_type {
|
|
int sectrac; /* sectors per track */
|
|
int heads; /* number of heads */
|
|
int seccyl; /* sectors per cylinder */
|
|
int secsize; /* size code for sectors */
|
|
int datalen; /* data len when secsize = 0 */
|
|
int steprate; /* step rate and head unload time */
|
|
int gap1; /* gap len between sectors */
|
|
int gap2; /* formatting gap */
|
|
int cyls; /* total num of cylinders */
|
|
int size; /* size of disk in sectors */
|
|
int step; /* steps per cylinder */
|
|
int rate; /* transfer speed code */
|
|
uint8_t fillbyte; /* format fill byte */
|
|
uint8_t interleave; /* interleave factor (formatting) */
|
|
const char *name;
|
|
};
|
|
|
|
/* The order of entries in the following table is important -- BEWARE! */
|
|
struct fd_type fd_types[] = {
|
|
{ 8,2,16,3,0xff,0xdf,0x35,0x74,77,1232,1,FDC_500KBPS, 0xf6, 1,
|
|
"1.2MB/[1024bytes/sector]" }, /* 1.2 MB japanese format */
|
|
{ 18,2,36,2,0xff,0xcf,0x1b,0x6c,80,2880,1,FDC_500KBPS, 0xf6, 1,
|
|
"1.44MB" }, /* 1.44MB diskette */
|
|
{ 15,2,30,2,0xff,0xdf,0x1b,0x54,80,2400,1,FDC_500KBPS, 0xf6, 1,
|
|
"1.2MB" }, /* 1.2 MB AT-diskettes */
|
|
{ 9,2,18,2,0xff,0xdf,0x23,0x50,40, 720,2,FDC_300KBPS, 0xf6, 1,
|
|
"360KB/AT" }, /* 360kB in 1.2MB drive */
|
|
{ 9,2,18,2,0xff,0xdf,0x2a,0x50,40, 720,1,FDC_250KBPS, 0xf6, 1,
|
|
"360KB/PC" }, /* 360kB PC diskettes */
|
|
{ 9,2,18,2,0xff,0xdf,0x2a,0x50,80,1440,1,FDC_250KBPS, 0xf6, 1,
|
|
"720KB" }, /* 3.5" 720kB diskette */
|
|
{ 9,2,18,2,0xff,0xdf,0x23,0x50,80,1440,1,FDC_300KBPS, 0xf6, 1,
|
|
"720KB/x" }, /* 720kB in 1.2MB drive */
|
|
{ 9,2,18,2,0xff,0xdf,0x2a,0x50,40, 720,2,FDC_250KBPS, 0xf6, 1,
|
|
"360KB/x" }, /* 360kB in 720kB drive */
|
|
};
|
|
|
|
/* software state, per disk (with up to 4 disks per ctlr) */
|
|
struct fd_softc {
|
|
device_t sc_dev;
|
|
struct disk sc_dk;
|
|
|
|
struct fd_type *sc_deftype; /* default type descriptor */
|
|
struct fd_type *sc_type; /* current type descriptor */
|
|
|
|
#if 0 /* see comments in fd_motor_on() */
|
|
struct callout sc_motoron_ch;
|
|
#endif
|
|
struct callout sc_motoroff_ch;
|
|
|
|
daddr_t sc_blkno; /* starting block number */
|
|
int sc_bcount; /* byte count left */
|
|
int sc_opts; /* user-set options */
|
|
int sc_skip; /* bytes already transferred */
|
|
int sc_nblks; /* number of blocks currently transferring */
|
|
int sc_nbytes; /* number of bytes currently transferring */
|
|
|
|
int sc_drive; /* physical unit number */
|
|
int sc_flags;
|
|
#define FD_BOPEN 0x01 /* it's open */
|
|
#define FD_COPEN 0x02 /* it's open */
|
|
#define FD_OPEN (FD_BOPEN|FD_COPEN) /* it's open */
|
|
#define FD_MOTOR 0x04 /* motor should be on */
|
|
#define FD_MOTOR_WAIT 0x08 /* motor coming up */
|
|
#define FD_ALIVE 0x10 /* alive */
|
|
int sc_cylin; /* where we think the head is */
|
|
|
|
TAILQ_ENTRY(fd_softc) sc_drivechain;
|
|
int sc_ops; /* I/O ops since last switch */
|
|
struct bufq_state *sc_q;/* pending I/O requests */
|
|
int sc_active; /* number of active I/O operations */
|
|
uint8_t *sc_copybuf; /* for secsize >=3 */
|
|
uint8_t sc_part; /* for secsize >=3 */
|
|
#define SEC_P10 0x02 /* first part */
|
|
#define SEC_P01 0x01 /* second part */
|
|
#define SEC_P11 0x03 /* both part */
|
|
|
|
krndsource_t rnd_source;
|
|
};
|
|
|
|
/* floppy driver configuration */
|
|
int fdprobe(device_t, cfdata_t, void *);
|
|
void fdattach(device_t, device_t, void *);
|
|
|
|
CFATTACH_DECL_NEW(fd, sizeof(struct fd_softc),
|
|
fdprobe, fdattach, NULL, NULL);
|
|
|
|
dev_type_open(fdopen);
|
|
dev_type_close(fdclose);
|
|
dev_type_read(fdread);
|
|
dev_type_write(fdwrite);
|
|
dev_type_ioctl(fdioctl);
|
|
dev_type_strategy(fdstrategy);
|
|
|
|
const struct bdevsw fd_bdevsw = {
|
|
fdopen, fdclose, fdstrategy, fdioctl, nodump, nosize, D_DISK
|
|
};
|
|
|
|
const struct cdevsw fd_cdevsw = {
|
|
fdopen, fdclose, fdread, fdwrite, fdioctl,
|
|
nostop, notty, nopoll, nommap, nokqfilter, D_DISK
|
|
};
|
|
|
|
void fdstart(struct fd_softc *);
|
|
|
|
struct dkdriver fddkdriver = { fdstrategy };
|
|
|
|
void fd_set_motor(struct fdc_softc *, int);
|
|
void fd_motor_off(void *);
|
|
#if 0
|
|
void fd_motor_on(void *);
|
|
#endif
|
|
int fdcresult(struct fdc_softc *);
|
|
int out_fdc(bus_space_tag_t, bus_space_handle_t, uint8_t);
|
|
void fdcstart(struct fdc_softc *);
|
|
void fdcstatus(device_t, int, const char *);
|
|
void fdctimeout(void *);
|
|
void fdcpseudointr(void *);
|
|
void fdcretry(struct fdc_softc *);
|
|
void fdfinish(struct fd_softc *, struct buf *);
|
|
struct fd_type *fd_dev_to_type(struct fd_softc *, dev_t);
|
|
int fdformat(dev_t, struct ne7_fd_formb *, struct lwp *);
|
|
static int fdcpoll(struct fdc_softc *);
|
|
static int fdgetdisklabel(struct fd_softc *, dev_t);
|
|
static void fd_do_eject(struct fdc_softc *, int);
|
|
|
|
void fd_mountroot_hook(device_t);
|
|
|
|
/* DMA transfer routines */
|
|
inline static void fdc_dmastart(struct fdc_softc *, int, void *, vsize_t);
|
|
inline static void fdc_dmaabort(struct fdc_softc *);
|
|
static int fdcdmaintr(void *);
|
|
static int fdcdmaerrintr(void *);
|
|
|
|
inline static void
|
|
fdc_dmastart(struct fdc_softc *fdc, int read, void *addr, vsize_t count)
|
|
{
|
|
int error;
|
|
|
|
DPRINTF(("fdc_dmastart: %s, addr = %p, count = %ld\n",
|
|
read ? "read" : "write", (void *)addr, count));
|
|
|
|
error = bus_dmamap_load(fdc->sc_dmat, fdc->sc_dmamap, addr, count,
|
|
0, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
panic("fdc_dmastart: cannot load dmamap");
|
|
}
|
|
|
|
bus_dmamap_sync(fdc->sc_dmat, fdc->sc_dmamap, 0, count,
|
|
read ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
|
|
|
|
/*
|
|
* Note 1:
|
|
* uPD72065 ignores A0 input (connected to x68k bus A1)
|
|
* during DMA xfer access, but it's better to explicitly
|
|
* specify FDC data register address for clarification.
|
|
* Note 2:
|
|
* FDC is connected to LSB 8 bits of X68000 16 bit bus
|
|
* (as BUS_SPACE_MAP_SHIFTED_ODD defined in bus.h)
|
|
* so each FDC regsiter is mapped at sparse odd address.
|
|
*
|
|
* XXX: No proper API to get DMA address of FDC register for DMAC.
|
|
*/
|
|
fdc->sc_xfer = dmac_prepare_xfer(fdc->sc_dmachan, fdc->sc_dmat,
|
|
fdc->sc_dmamap,
|
|
read ? DMAC_OCR_DIR_DTM : DMAC_OCR_DIR_MTD,
|
|
DMAC_SCR_MAC_COUNT_UP | DMAC_SCR_DAC_NO_COUNT,
|
|
fdc->sc_addr + fddata * 2 + 1);
|
|
|
|
fdc->sc_read = read;
|
|
dmac_start_xfer(fdc->sc_dmachan->ch_softc, fdc->sc_xfer);
|
|
}
|
|
|
|
inline static void
|
|
fdc_dmaabort(struct fdc_softc *fdc)
|
|
{
|
|
|
|
dmac_abort_xfer(fdc->sc_dmachan->ch_softc, fdc->sc_xfer);
|
|
bus_dmamap_unload(fdc->sc_dmat, fdc->sc_dmamap);
|
|
}
|
|
|
|
static int
|
|
fdcdmaintr(void *arg)
|
|
{
|
|
struct fdc_softc *fdc = arg;
|
|
|
|
bus_dmamap_sync(fdc->sc_dmat, fdc->sc_dmamap,
|
|
0, fdc->sc_dmamap->dm_mapsize,
|
|
fdc->sc_read ?
|
|
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(fdc->sc_dmat, fdc->sc_dmamap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
fdcdmaerrintr(void *dummy)
|
|
{
|
|
|
|
DPRINTF(("fdcdmaerrintr\n"));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
int
|
|
fdcprobe(device_t parent, cfdata_t cf, void *aux)
|
|
{
|
|
struct intio_attach_args *ia = aux;
|
|
|
|
if (strcmp(ia->ia_name, "fdc") != 0)
|
|
return 0;
|
|
|
|
if (ia->ia_addr == INTIOCF_ADDR_DEFAULT)
|
|
ia->ia_addr = FDC_ADDR;
|
|
if (ia->ia_intr == INTIOCF_INTR_DEFAULT)
|
|
ia->ia_intr = FDC_INTR;
|
|
if (ia->ia_dma == INTIOCF_DMA_DEFAULT)
|
|
ia->ia_dma = FDC_DMA;
|
|
if (ia->ia_dmaintr == INTIOCF_DMAINTR_DEFAULT)
|
|
ia->ia_dmaintr = FDC_DMAINTR;
|
|
|
|
if ((ia->ia_intr & 0x03) != 0)
|
|
return 0;
|
|
|
|
ia->ia_size = FDC_MAPSIZE;
|
|
if (intio_map_allocate_region(parent, ia, INTIO_MAP_TESTONLY))
|
|
return 0;
|
|
|
|
/* builtin device; always there */
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Arguments passed between fdcattach and fdprobe.
|
|
*/
|
|
struct fdc_attach_args {
|
|
int fa_drive;
|
|
struct fd_type *fa_deftype;
|
|
};
|
|
|
|
/*
|
|
* Print the location of a disk drive (called just before attaching the
|
|
* the drive). If `fdc' is not NULL, the drive was found but was not
|
|
* in the system config file; print the drive name as well.
|
|
* Return QUIET (config_find ignores this if the device was configured) to
|
|
* avoid printing `fdN not configured' messages.
|
|
*/
|
|
int
|
|
fdprint(void *aux, const char *fdc)
|
|
{
|
|
struct fdc_attach_args *fa = aux;
|
|
|
|
if (fdc == NULL)
|
|
aprint_normal(" drive %d", fa->fa_drive);
|
|
return QUIET;
|
|
}
|
|
|
|
void
|
|
fdcattach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct fdc_softc *fdc = device_private(self);
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
struct intio_attach_args *ia = aux;
|
|
struct fdc_attach_args fa;
|
|
|
|
iot = ia->ia_bst;
|
|
|
|
aprint_normal("\n");
|
|
|
|
/* Re-map the I/O space. */
|
|
if (bus_space_map(iot, ia->ia_addr, ia->ia_size,
|
|
BUS_SPACE_MAP_SHIFTED_ODD, &ioh) != 0) {
|
|
aprint_error_dev(self, "unable to map I/O space\n");
|
|
return;
|
|
}
|
|
|
|
callout_init(&fdc->sc_timo_ch, 0);
|
|
callout_init(&fdc->sc_intr_ch, 0);
|
|
|
|
fdc->sc_iot = iot;
|
|
fdc->sc_ioh = ioh;
|
|
fdc->sc_addr = (void *)ia->ia_addr;
|
|
|
|
fdc->sc_dmat = ia->ia_dmat;
|
|
fdc->sc_state = DEVIDLE;
|
|
TAILQ_INIT(&fdc->sc_drives);
|
|
|
|
/* Initialize DMAC channel */
|
|
fdc->sc_dmachan = dmac_alloc_channel(parent, ia->ia_dma, "fdc",
|
|
ia->ia_dmaintr, fdcdmaintr, fdc,
|
|
ia->ia_dmaintr + 1, fdcdmaerrintr, fdc);
|
|
if (bus_dmamap_create(fdc->sc_dmat, FDC_MAXIOSIZE, 1, DMAC_MAXSEGSZ,
|
|
0, BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW, &fdc->sc_dmamap)) {
|
|
aprint_error_dev(self, "can't set up intio DMA map\n");
|
|
return;
|
|
}
|
|
|
|
if (intio_intr_establish(ia->ia_intr, "fdc", fdcintr, fdc) != 0)
|
|
panic("Could not establish interrupt (duplicated vector?).");
|
|
intio_set_ivec(ia->ia_intr);
|
|
|
|
/* reset */
|
|
intio_disable_intr(SICILIAN_INTR_FDD);
|
|
intio_enable_intr(SICILIAN_INTR_FDC);
|
|
fdcresult(fdc);
|
|
fdcreset(fdc);
|
|
|
|
aprint_normal_dev(self, "uPD72065 FDC\n");
|
|
out_fdc(iot, ioh, NE7CMD_SPECIFY); /* specify command */
|
|
out_fdc(iot, ioh, 0xd0);
|
|
out_fdc(iot, ioh, 0x10);
|
|
|
|
/* physical limit: four drives per controller. */
|
|
for (fa.fa_drive = 0; fa.fa_drive < 4; fa.fa_drive++) {
|
|
(void)config_found(self, (void *)&fa, fdprint);
|
|
}
|
|
|
|
intio_enable_intr(SICILIAN_INTR_FDC);
|
|
}
|
|
|
|
void
|
|
fdcreset(struct fdc_softc *fdc)
|
|
{
|
|
|
|
bus_space_write_1(fdc->sc_iot, fdc->sc_ioh, fdsts, NE7CMD_RESET);
|
|
}
|
|
|
|
static int
|
|
fdcpoll(struct fdc_softc *fdc)
|
|
{
|
|
int i = 25000, n;
|
|
|
|
while (--i > 0) {
|
|
if ((intio_get_sicilian_intr() & SICILIAN_STAT_FDC) != 0) {
|
|
out_fdc(fdc->sc_iot, fdc->sc_ioh, NE7CMD_SENSEI);
|
|
n = fdcresult(fdc);
|
|
break;
|
|
}
|
|
DELAY(100);
|
|
}
|
|
return i;
|
|
}
|
|
|
|
int
|
|
fdprobe(device_t parent, cfdata_t cf, void *aux)
|
|
{
|
|
struct fdc_softc *fdc = device_private(parent);
|
|
struct fd_type *type;
|
|
struct fdc_attach_args *fa = aux;
|
|
int drive = fa->fa_drive;
|
|
bus_space_tag_t iot = fdc->sc_iot;
|
|
bus_space_handle_t ioh = fdc->sc_ioh;
|
|
int n = 0;
|
|
int found = 0;
|
|
int i;
|
|
|
|
if (cf->cf_loc[FDCCF_UNIT] != FDCCF_UNIT_DEFAULT &&
|
|
cf->cf_loc[FDCCF_UNIT] != drive)
|
|
return 0;
|
|
|
|
type = &fd_types[0]; /* XXX 1.2MB */
|
|
|
|
/* toss any interrupt status */
|
|
for (n = 0; n < 4; n++) {
|
|
out_fdc(iot, ioh, NE7CMD_SENSEI);
|
|
(void)fdcresult(fdc);
|
|
}
|
|
intio_disable_intr(SICILIAN_INTR_FDC);
|
|
|
|
/* select drive and turn on motor */
|
|
bus_space_write_1(iot, ioh, fdctl, 0x80 | (type->rate << 4)| drive);
|
|
fdc_force_ready(FDCRDY);
|
|
fdcpoll(fdc);
|
|
|
|
retry:
|
|
out_fdc(iot, ioh, NE7CMD_RECAL);
|
|
out_fdc(iot, ioh, drive);
|
|
|
|
i = 25000;
|
|
while (--i > 0) {
|
|
if ((intio_get_sicilian_intr() & SICILIAN_STAT_FDC) != 0) {
|
|
out_fdc(iot, ioh, NE7CMD_SENSEI);
|
|
n = fdcresult(fdc);
|
|
break;
|
|
}
|
|
DELAY(100);
|
|
}
|
|
|
|
#ifdef FDDEBUG
|
|
{
|
|
int _i;
|
|
DPRINTF(("fdprobe: status"));
|
|
for (_i = 0; _i < n; _i++)
|
|
DPRINTF((" %x", fdc->sc_status[_i]));
|
|
DPRINTF(("\n"));
|
|
}
|
|
#endif
|
|
|
|
if (n == 2) {
|
|
if ((fdc->sc_status[0] & 0xf0) == 0x20)
|
|
found = 1;
|
|
else if ((fdc->sc_status[0] & 0xf0) == 0xc0)
|
|
goto retry;
|
|
}
|
|
|
|
/* turn off motor */
|
|
bus_space_write_1(fdc->sc_iot, fdc->sc_ioh,
|
|
fdctl, (type->rate << 4) | drive);
|
|
fdc_force_ready(FDCSTBY);
|
|
if (!found) {
|
|
intio_enable_intr(SICILIAN_INTR_FDC);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Controller is working, and drive responded. Attach it.
|
|
*/
|
|
void
|
|
fdattach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct fdc_softc *fdc = device_private(parent);
|
|
struct fd_softc *fd = device_private(self);
|
|
struct fdc_attach_args *fa = aux;
|
|
struct fd_type *type = &fd_types[0]; /* XXX 1.2MB */
|
|
int drive = fa->fa_drive;
|
|
|
|
#if 0
|
|
callout_init(&fd->sc_motoron_ch, 0);
|
|
#endif
|
|
callout_init(&fd->sc_motoroff_ch, 0);
|
|
|
|
fd->sc_dev = self;
|
|
fd->sc_flags = 0;
|
|
|
|
if (type)
|
|
aprint_normal(": %s, %d cyl, %d head, %d sec\n", type->name,
|
|
type->cyls, type->heads, type->sectrac);
|
|
else
|
|
aprint_normal(": density unknown\n");
|
|
|
|
bufq_alloc(&fd->sc_q, "disksort", BUFQ_SORT_CYLINDER);
|
|
fd->sc_cylin = -1;
|
|
fd->sc_drive = drive;
|
|
fd->sc_deftype = type;
|
|
fdc->sc_fd[drive] = fd;
|
|
|
|
fd->sc_copybuf = malloc(PAGE_SIZE, M_DEVBUF, M_WAITOK);
|
|
if (fd->sc_copybuf == 0)
|
|
aprint_error("%s: WARNING!! malloc() failed.\n", __func__);
|
|
fd->sc_flags |= FD_ALIVE;
|
|
|
|
/*
|
|
* Initialize and attach the disk structure.
|
|
*/
|
|
disk_init(&fd->sc_dk, device_xname(fd->sc_dev), &fddkdriver);
|
|
disk_attach(&fd->sc_dk);
|
|
|
|
/*
|
|
* Establish a mountroot_hook anyway in case we booted
|
|
* with RB_ASKNAME and get selected as the boot device.
|
|
*/
|
|
mountroothook_establish(fd_mountroot_hook, fd->sc_dev);
|
|
|
|
rnd_attach_source(&fd->rnd_source, device_xname(fd->sc_dev),
|
|
RND_TYPE_DISK, 0);
|
|
}
|
|
|
|
struct fd_type *
|
|
fd_dev_to_type(struct fd_softc *fd, dev_t dev)
|
|
{
|
|
size_t type = FDTYPE(dev);
|
|
|
|
if (type > __arraycount(fd_types))
|
|
return NULL;
|
|
return &fd_types[type];
|
|
}
|
|
|
|
void
|
|
fdstrategy(struct buf *bp)
|
|
{
|
|
struct fd_softc *fd;
|
|
int unit;
|
|
int sz;
|
|
int s;
|
|
|
|
unit = FDUNIT(bp->b_dev);
|
|
fd = device_lookup_private(&fd_cd, unit);
|
|
if (fd == NULL) {
|
|
bp->b_error = EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
if (bp->b_blkno < 0 ||
|
|
((bp->b_bcount % FDC_BSIZE) != 0 &&
|
|
(bp->b_flags & B_FORMAT) == 0)) {
|
|
DPRINTF(("fdstrategy: unit=%d, blkno=%" PRId64 ", "
|
|
"bcount=%d\n", unit,
|
|
bp->b_blkno, bp->b_bcount));
|
|
bp->b_error = EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
/* If it's a null transfer, return immediately. */
|
|
if (bp->b_bcount == 0)
|
|
goto done;
|
|
|
|
sz = howmany(bp->b_bcount, FDC_BSIZE);
|
|
|
|
if (bp->b_blkno + sz >
|
|
(fd->sc_type->size << (fd->sc_type->secsize - 2))) {
|
|
sz = (fd->sc_type->size << (fd->sc_type->secsize - 2))
|
|
- bp->b_blkno;
|
|
if (sz == 0) {
|
|
/* If exactly at end of disk, return EOF. */
|
|
bp->b_resid = bp->b_bcount;
|
|
goto done;
|
|
}
|
|
if (sz < 0) {
|
|
/* If past end of disk, return EINVAL. */
|
|
bp->b_error = EINVAL;
|
|
goto done;
|
|
}
|
|
/* Otherwise, truncate request. */
|
|
bp->b_bcount = sz << DEV_BSHIFT;
|
|
}
|
|
|
|
bp->b_rawblkno = bp->b_blkno;
|
|
bp->b_cylinder = (bp->b_blkno / (FDC_BSIZE / DEV_BSIZE)) /
|
|
(fd->sc_type->seccyl * (1 << (fd->sc_type->secsize - 2)));
|
|
|
|
DPRINTF(("fdstrategy: %s b_blkno %" PRId64 " b_bcount %d cylin %d\n",
|
|
bp->b_flags & B_READ ? "read" : "write",
|
|
bp->b_blkno, bp->b_bcount, bp->b_cylinder));
|
|
/* Queue transfer on drive, activate drive and controller if idle. */
|
|
s = splbio();
|
|
bufq_put(fd->sc_q, bp);
|
|
callout_stop(&fd->sc_motoroff_ch); /* a good idea */
|
|
if (fd->sc_active == 0)
|
|
fdstart(fd);
|
|
#ifdef DIAGNOSTIC
|
|
else {
|
|
struct fdc_softc *fdc;
|
|
|
|
fdc = device_private(device_parent(fd->sc_dev));
|
|
if (fdc->sc_state == DEVIDLE) {
|
|
printf("fdstrategy: controller inactive\n");
|
|
fdcstart(fdc);
|
|
}
|
|
}
|
|
#endif
|
|
splx(s);
|
|
return;
|
|
|
|
done:
|
|
/* Toss transfer; we're done early. */
|
|
biodone(bp);
|
|
}
|
|
|
|
void
|
|
fdstart(struct fd_softc *fd)
|
|
{
|
|
struct fdc_softc *fdc = device_private(device_parent(fd->sc_dev));
|
|
int active = !TAILQ_EMPTY(&fdc->sc_drives);
|
|
|
|
/* Link into controller queue. */
|
|
fd->sc_active = 1;
|
|
TAILQ_INSERT_TAIL(&fdc->sc_drives, fd, sc_drivechain);
|
|
|
|
/* If controller not already active, start it. */
|
|
if (!active)
|
|
fdcstart(fdc);
|
|
}
|
|
|
|
void
|
|
fdfinish(struct fd_softc *fd, struct buf *bp)
|
|
{
|
|
struct fdc_softc *fdc = device_private(device_parent(fd->sc_dev));
|
|
|
|
/*
|
|
* Move this drive to the end of the queue to give others a `fair'
|
|
* chance. We only force a switch if N operations are completed while
|
|
* another drive is waiting to be serviced, since there is a long motor
|
|
* startup delay whenever we switch.
|
|
*/
|
|
(void)bufq_get(fd->sc_q);
|
|
if (TAILQ_NEXT(fd, sc_drivechain) && ++fd->sc_ops >= 8) {
|
|
fd->sc_ops = 0;
|
|
TAILQ_REMOVE(&fdc->sc_drives, fd, sc_drivechain);
|
|
if (bufq_peek(fd->sc_q) != NULL)
|
|
TAILQ_INSERT_TAIL(&fdc->sc_drives, fd, sc_drivechain);
|
|
else
|
|
fd->sc_active = 0;
|
|
}
|
|
bp->b_resid = fd->sc_bcount;
|
|
fd->sc_skip = 0;
|
|
|
|
rnd_add_uint32(&fd->rnd_source, bp->b_blkno);
|
|
|
|
biodone(bp);
|
|
/* turn off motor 5s from now */
|
|
callout_reset(&fd->sc_motoroff_ch, 5 * hz, fd_motor_off, fd);
|
|
fdc->sc_state = DEVIDLE;
|
|
}
|
|
|
|
int
|
|
fdread(dev_t dev, struct uio *uio, int flags)
|
|
{
|
|
|
|
return physio(fdstrategy, NULL, dev, B_READ, minphys, uio);
|
|
}
|
|
|
|
int
|
|
fdwrite(dev_t dev, struct uio *uio, int flags)
|
|
{
|
|
|
|
return physio(fdstrategy, NULL, dev, B_WRITE, minphys, uio);
|
|
}
|
|
|
|
void
|
|
fd_set_motor(struct fdc_softc *fdc, int reset)
|
|
{
|
|
struct fd_softc *fd;
|
|
int n;
|
|
|
|
DPRINTF(("fd_set_motor:\n"));
|
|
for (n = 0; n < 4; n++) {
|
|
fd = fdc->sc_fd[n];
|
|
if (fd != NULL && (fd->sc_flags & FD_MOTOR) != 0)
|
|
bus_space_write_1(fdc->sc_iot, fdc->sc_ioh, fdctl,
|
|
0x80 | (fd->sc_type->rate << 4)| n);
|
|
}
|
|
}
|
|
|
|
void
|
|
fd_motor_off(void *arg)
|
|
{
|
|
struct fd_softc *fd = arg;
|
|
struct fdc_softc *fdc = device_private(device_parent(fd->sc_dev));
|
|
int s;
|
|
|
|
DPRINTF(("fd_motor_off:\n"));
|
|
|
|
s = splbio();
|
|
fd->sc_flags &= ~(FD_MOTOR | FD_MOTOR_WAIT);
|
|
bus_space_write_1(fdc->sc_iot, fdc->sc_ioh, fdctl,
|
|
(fd->sc_type->rate << 4) | fd->sc_drive);
|
|
#if 0
|
|
fd_set_motor(fdc, 0); /* XXX */
|
|
#endif
|
|
splx(s);
|
|
}
|
|
|
|
#if 0 /* on x68k motor on triggers interrupts by state change of ready line. */
|
|
void
|
|
fd_motor_on(void *arg)
|
|
{
|
|
struct fd_softc *fd = arg;
|
|
struct fdc_softc *fdc = device_private(device_parent(fd->sc_dev));
|
|
int s;
|
|
|
|
DPRINTF(("fd_motor_on:\n"));
|
|
|
|
s = splbio();
|
|
fd->sc_flags &= ~FD_MOTOR_WAIT;
|
|
if ((TAILQ_FIRST(&fdc->sc_drives) == fd) &&
|
|
(fdc->sc_state == MOTORWAIT))
|
|
(void)fdcintr(fdc);
|
|
splx(s);
|
|
}
|
|
#endif
|
|
|
|
int
|
|
fdcresult(struct fdc_softc *fdc)
|
|
{
|
|
bus_space_tag_t iot = fdc->sc_iot;
|
|
bus_space_handle_t ioh = fdc->sc_ioh;
|
|
uint8_t i;
|
|
int j, n;
|
|
|
|
n = 0;
|
|
for (j = 100000; j != 0; j--) {
|
|
i = bus_space_read_1(iot, ioh, fdsts) &
|
|
(NE7_DIO | NE7_RQM | NE7_CB);
|
|
|
|
if (i == NE7_RQM)
|
|
return n;
|
|
if (i == (NE7_DIO | NE7_RQM | NE7_CB)) {
|
|
if (n >= sizeof(fdc->sc_status)) {
|
|
log(LOG_ERR, "fdcresult: overrun\n");
|
|
return -1;
|
|
}
|
|
fdc->sc_status[n++] =
|
|
bus_space_read_1(iot, ioh, fddata);
|
|
}
|
|
delay(10);
|
|
}
|
|
log(LOG_ERR, "fdcresult: timeout\n");
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
out_fdc(bus_space_tag_t iot, bus_space_handle_t ioh, uint8_t x)
|
|
{
|
|
int i = 100000;
|
|
|
|
while ((bus_space_read_1(iot, ioh, fdsts) & NE7_DIO) && i-- > 0);
|
|
if (i <= 0)
|
|
return -1;
|
|
while ((bus_space_read_1(iot, ioh, fdsts) & NE7_RQM) == 0 && i-- > 0);
|
|
if (i <= 0)
|
|
return -1;
|
|
bus_space_write_1(iot, ioh, fddata, x);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
fdopen(dev_t dev, int flags, int mode, struct lwp *l)
|
|
{
|
|
int unit;
|
|
struct fd_softc *fd;
|
|
struct fd_type *type;
|
|
struct fdc_softc *fdc;
|
|
|
|
unit = FDUNIT(dev);
|
|
fd = device_lookup_private(&fd_cd, unit);
|
|
if (fd == NULL)
|
|
return ENXIO;
|
|
type = fd_dev_to_type(fd, dev);
|
|
if (type == NULL)
|
|
return ENXIO;
|
|
|
|
if ((fd->sc_flags & FD_OPEN) != 0 &&
|
|
fd->sc_type != type)
|
|
return EBUSY;
|
|
|
|
fdc = device_private(device_parent(fd->sc_dev));
|
|
if ((fd->sc_flags & FD_OPEN) == 0) {
|
|
/* Lock eject button */
|
|
bus_space_write_1(fdc->sc_iot, fdc->sc_ioh, fdout,
|
|
0x40 | (1 << unit));
|
|
bus_space_write_1(fdc->sc_iot, fdc->sc_ioh, fdout, 0x40);
|
|
}
|
|
|
|
fd->sc_type = type;
|
|
fd->sc_cylin = -1;
|
|
|
|
switch (mode) {
|
|
case S_IFCHR:
|
|
fd->sc_flags |= FD_COPEN;
|
|
break;
|
|
case S_IFBLK:
|
|
fd->sc_flags |= FD_BOPEN;
|
|
break;
|
|
}
|
|
|
|
fdgetdisklabel(fd, dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
fdclose(dev_t dev, int flags, int mode, struct lwp *l)
|
|
{
|
|
int unit = FDUNIT(dev);
|
|
struct fd_softc *fd = device_lookup_private(&fd_cd, unit);
|
|
struct fdc_softc *fdc = device_private(device_parent(fd->sc_dev));
|
|
|
|
DPRINTF(("fdclose %d\n", unit));
|
|
|
|
switch (mode) {
|
|
case S_IFCHR:
|
|
fd->sc_flags &= ~FD_COPEN;
|
|
break;
|
|
case S_IFBLK:
|
|
fd->sc_flags &= ~FD_BOPEN;
|
|
break;
|
|
}
|
|
|
|
/* clear flags */
|
|
fd->sc_opts &= ~(FDOPT_NORETRY | FDOPT_SILENT);
|
|
|
|
if ((fd->sc_flags & FD_OPEN) == 0) {
|
|
bus_space_write_1(fdc->sc_iot, fdc->sc_ioh, fdout,
|
|
(1 << unit));
|
|
bus_space_write_1(fdc->sc_iot, fdc->sc_ioh, fdout, 0);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
fdcstart(struct fdc_softc *fdc)
|
|
{
|
|
|
|
#ifdef DIAGNOSTIC
|
|
/*
|
|
* only got here if controller's drive queue was inactive; should
|
|
* be in idle state
|
|
*/
|
|
if (fdc->sc_state != DEVIDLE) {
|
|
printf("fdcstart: not idle\n");
|
|
return;
|
|
}
|
|
#endif
|
|
(void)fdcintr(fdc);
|
|
}
|
|
|
|
|
|
static void
|
|
fdcpstatus(int n, struct fdc_softc *fdc)
|
|
{
|
|
char bits[64];
|
|
|
|
switch (n) {
|
|
case 0:
|
|
printf("\n");
|
|
break;
|
|
case 2:
|
|
snprintb(bits, sizeof(bits), NE7_ST0BITS, fdc->sc_status[0]);
|
|
printf(" (st0 %s cyl %d)\n", bits, fdc->sc_status[1]);
|
|
break;
|
|
case 7:
|
|
snprintb(bits, sizeof(bits), NE7_ST0BITS, fdc->sc_status[0]);
|
|
printf(" (st0 %s", bits);
|
|
snprintb(bits, sizeof(bits), NE7_ST1BITS, fdc->sc_status[1]);
|
|
printf(" st1 %s", bits);
|
|
snprintb(bits, sizeof(bits), NE7_ST2BITS, fdc->sc_status[2]);
|
|
printf(" st2 %s", bits);
|
|
printf(" cyl %d head %d sec %d)\n",
|
|
fdc->sc_status[3], fdc->sc_status[4], fdc->sc_status[5]);
|
|
break;
|
|
#ifdef DIAGNOSTIC
|
|
default:
|
|
printf("\nfdcstatus: weird size");
|
|
break;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void
|
|
fdcstatus(device_t dv, int n, const char *s)
|
|
{
|
|
struct fdc_softc *fdc = device_private(device_parent(dv));
|
|
|
|
if (n == 0) {
|
|
out_fdc(fdc->sc_iot, fdc->sc_ioh, NE7CMD_SENSEI);
|
|
(void)fdcresult(fdc);
|
|
n = 2;
|
|
}
|
|
|
|
printf("%s: %s: state %d", device_xname(dv), s, fdc->sc_state);
|
|
fdcpstatus(n, fdc);
|
|
}
|
|
|
|
void
|
|
fdctimeout(void *arg)
|
|
{
|
|
struct fdc_softc *fdc = arg;
|
|
struct fd_softc *fd = TAILQ_FIRST(&fdc->sc_drives);
|
|
int s;
|
|
|
|
s = splbio();
|
|
fdcstatus(fd->sc_dev, 0, "timeout");
|
|
|
|
if (bufq_peek(fd->sc_q) != NULL)
|
|
fdc->sc_state++;
|
|
else
|
|
fdc->sc_state = DEVIDLE;
|
|
|
|
(void)fdcintr(fdc);
|
|
splx(s);
|
|
}
|
|
|
|
#if 0
|
|
void
|
|
fdcpseudointr(void *arg)
|
|
{
|
|
int s;
|
|
struct fdc_softc *fdc = arg;
|
|
|
|
/* just ensure it has the right spl */
|
|
s = splbio();
|
|
(void)fdcintr(fdc);
|
|
splx(s);
|
|
}
|
|
#endif
|
|
|
|
int
|
|
fdcintr(void *arg)
|
|
{
|
|
struct fdc_softc *fdc = arg;
|
|
#define st0 fdc->sc_status[0]
|
|
#define cyl fdc->sc_status[1]
|
|
struct fd_softc *fd;
|
|
struct buf *bp;
|
|
bus_space_tag_t iot = fdc->sc_iot;
|
|
bus_space_handle_t ioh = fdc->sc_ioh;
|
|
int read, head, sec, pos, i, sectrac, nblks;
|
|
int tmp;
|
|
struct fd_type *type;
|
|
struct ne7_fd_formb *finfo = NULL;
|
|
|
|
loop:
|
|
fd = TAILQ_FIRST(&fdc->sc_drives);
|
|
if (fd == NULL) {
|
|
DPRINTF(("fdcintr: set DEVIDLE\n"));
|
|
if (fdc->sc_state == DEVIDLE) {
|
|
if ((intio_get_sicilian_intr() & SICILIAN_STAT_FDC)
|
|
!= 0) {
|
|
out_fdc(iot, ioh, NE7CMD_SENSEI);
|
|
if ((tmp = fdcresult(fdc)) != 2 ||
|
|
(st0 & 0xf8) != 0x20) {
|
|
goto loop;
|
|
}
|
|
}
|
|
}
|
|
/* no drives waiting; end */
|
|
fdc->sc_state = DEVIDLE;
|
|
return 1;
|
|
}
|
|
|
|
/* Is there a transfer to this drive? If not, deactivate drive. */
|
|
bp = bufq_peek(fd->sc_q);
|
|
if (bp == NULL) {
|
|
fd->sc_ops = 0;
|
|
TAILQ_REMOVE(&fdc->sc_drives, fd, sc_drivechain);
|
|
fd->sc_active = 0;
|
|
goto loop;
|
|
}
|
|
|
|
if (bp->b_flags & B_FORMAT)
|
|
finfo = (struct ne7_fd_formb *)bp->b_data;
|
|
|
|
switch (fdc->sc_state) {
|
|
case DEVIDLE:
|
|
DPRINTF(("fdcintr: in DEVIDLE\n"));
|
|
fdc->sc_errors = 0;
|
|
fd->sc_skip = 0;
|
|
fd->sc_bcount = bp->b_bcount;
|
|
fd->sc_blkno = bp->b_blkno / (FDC_BSIZE / DEV_BSIZE);
|
|
callout_stop(&fd->sc_motoroff_ch);
|
|
if ((fd->sc_flags & FD_MOTOR_WAIT) != 0) {
|
|
fdc->sc_state = MOTORWAIT;
|
|
return 1;
|
|
}
|
|
if ((fd->sc_flags & FD_MOTOR) == 0) {
|
|
/* Turn on the motor */
|
|
/* being careful about other drives. */
|
|
for (i = 0; i < 4; i++) {
|
|
struct fd_softc *ofd = fdc->sc_fd[i];
|
|
if (ofd != NULL &&
|
|
(ofd->sc_flags & FD_MOTOR) != 0) {
|
|
callout_stop(&ofd->sc_motoroff_ch);
|
|
ofd->sc_flags &=
|
|
~(FD_MOTOR | FD_MOTOR_WAIT);
|
|
break;
|
|
}
|
|
}
|
|
fd->sc_flags |= FD_MOTOR | FD_MOTOR_WAIT;
|
|
fd_set_motor(fdc, 0);
|
|
fdc->sc_state = MOTORWAIT;
|
|
#if 0 /* no need to callout on x68k; motor on will trigger interrupts */
|
|
/* allow .5s for motor to stabilize */
|
|
callout_reset(&fd->sc_motoron_ch, hz / 2,
|
|
fd_motor_on, fd);
|
|
#endif
|
|
return 1;
|
|
}
|
|
/* Make sure the right drive is selected. */
|
|
fd_set_motor(fdc, 0);
|
|
|
|
/* fall through */
|
|
case DOSEEK:
|
|
doseek:
|
|
DPRINTF(("fdcintr: in DOSEEK\n"));
|
|
if (fd->sc_cylin == bp->b_cylinder)
|
|
goto doio;
|
|
|
|
out_fdc(iot, ioh, NE7CMD_SPECIFY); /* specify command */
|
|
out_fdc(iot, ioh, 0xd0); /* XXX const */
|
|
out_fdc(iot, ioh, 0x10);
|
|
|
|
out_fdc(iot, ioh, NE7CMD_SEEK); /* seek function */
|
|
out_fdc(iot, ioh, fd->sc_drive); /* drive number */
|
|
out_fdc(iot, ioh, bp->b_cylinder * fd->sc_type->step);
|
|
|
|
fd->sc_cylin = -1;
|
|
fdc->sc_state = SEEKWAIT;
|
|
|
|
iostat_seek(fd->sc_dk.dk_stats);
|
|
disk_busy(&fd->sc_dk);
|
|
|
|
callout_reset(&fdc->sc_timo_ch, 4 * hz, fdctimeout, fdc);
|
|
return 1;
|
|
|
|
case DOIO:
|
|
doio:
|
|
DPRINTF(("fdcintr: DOIO: "));
|
|
type = fd->sc_type;
|
|
if (finfo != NULL)
|
|
fd->sc_skip = (char *)&(finfo->fd_formb_cylno(0)) -
|
|
(char *)finfo;
|
|
sectrac = type->sectrac;
|
|
pos = fd->sc_blkno % (sectrac * (1 << (type->secsize - 2)));
|
|
sec = pos / (1 << (type->secsize - 2));
|
|
if (finfo != NULL || type->secsize == 2) {
|
|
fd->sc_part = SEC_P11;
|
|
nblks = (sectrac - sec) << (type->secsize - 2);
|
|
nblks = min(nblks, fd->sc_bcount / FDC_BSIZE);
|
|
DPRINTF(("nblks(0)"));
|
|
} else if ((fd->sc_blkno % 2) == 0) {
|
|
if (fd->sc_bcount & 0x00000200) {
|
|
if (fd->sc_bcount == FDC_BSIZE) {
|
|
fd->sc_part = SEC_P10;
|
|
nblks = 1;
|
|
DPRINTF(("nblks(1)"));
|
|
} else {
|
|
fd->sc_part = SEC_P11;
|
|
nblks = (sectrac - sec) * 2;
|
|
nblks = min(nblks,
|
|
fd->sc_bcount / FDC_BSIZE - 1);
|
|
DPRINTF(("nblks(2)"));
|
|
}
|
|
} else {
|
|
fd->sc_part = SEC_P11;
|
|
nblks = (sectrac - sec) << (type->secsize - 2);
|
|
nblks = min(nblks, fd->sc_bcount / FDC_BSIZE);
|
|
DPRINTF(("nblks(3)"));
|
|
}
|
|
} else {
|
|
fd->sc_part = SEC_P01;
|
|
nblks = 1;
|
|
DPRINTF(("nblks(4)"));
|
|
}
|
|
nblks = min(nblks, FDC_MAXIOSIZE / FDC_BSIZE);
|
|
DPRINTF((" %d\n", nblks));
|
|
fd->sc_nblks = nblks;
|
|
fd->sc_nbytes =
|
|
(finfo != NULL) ? bp->b_bcount : nblks * FDC_BSIZE;
|
|
head = (fd->sc_blkno
|
|
% (type->seccyl * (1 << (type->secsize - 2))))
|
|
/ (type->sectrac * (1 << (type->secsize - 2)));
|
|
|
|
#ifdef DIAGNOSTIC
|
|
{
|
|
int block;
|
|
block = ((fd->sc_cylin * type->heads + head) *
|
|
type->sectrac + sec) * (1 << (type->secsize - 2));
|
|
block += (fd->sc_part == SEC_P01) ? 1 : 0;
|
|
if (block != fd->sc_blkno) {
|
|
printf("C H R N: %d %d %d %d\n",
|
|
fd->sc_cylin, head, sec, type->secsize);
|
|
printf("fdcintr: doio: block %d != blkno %"
|
|
PRId64 "\n",
|
|
block, fd->sc_blkno);
|
|
#ifdef DDB
|
|
Debugger();
|
|
#endif
|
|
}
|
|
}
|
|
#endif
|
|
read = bp->b_flags & B_READ;
|
|
DPRINTF(("fdcintr: %s drive %d track %d "
|
|
"head %d sec %d nblks %d, skip %d\n",
|
|
read ? "read" : "write", fd->sc_drive, fd->sc_cylin,
|
|
head, sec, nblks, fd->sc_skip));
|
|
DPRINTF(("C H R N: %d %d %d %d\n", fd->sc_cylin, head, sec,
|
|
type->secsize));
|
|
|
|
if (finfo == NULL && fd->sc_part != SEC_P11)
|
|
goto docopy;
|
|
|
|
fdc_dmastart(fdc, read, (char *)bp->b_data + fd->sc_skip,
|
|
fd->sc_nbytes);
|
|
if (finfo != NULL) {
|
|
/* formatting */
|
|
if (out_fdc(iot, ioh, NE7CMD_FORMAT) < 0) {
|
|
fdc->sc_errors = 4;
|
|
fdcretry(fdc);
|
|
goto loop;
|
|
}
|
|
out_fdc(iot, ioh, (head << 2) | fd->sc_drive);
|
|
out_fdc(iot, ioh, finfo->fd_formb_secshift);
|
|
out_fdc(iot, ioh, finfo->fd_formb_nsecs);
|
|
out_fdc(iot, ioh, finfo->fd_formb_gaplen);
|
|
out_fdc(iot, ioh, finfo->fd_formb_fillbyte);
|
|
} else {
|
|
if (read)
|
|
out_fdc(iot, ioh, NE7CMD_READ); /* READ */
|
|
else
|
|
out_fdc(iot, ioh, NE7CMD_WRITE); /* WRITE */
|
|
out_fdc(iot, ioh, (head << 2) | fd->sc_drive);
|
|
out_fdc(iot, ioh, bp->b_cylinder); /* cylinder */
|
|
out_fdc(iot, ioh, head);
|
|
out_fdc(iot, ioh, sec + 1); /* sector +1 */
|
|
out_fdc(iot, ioh, type->secsize); /* sector size */
|
|
out_fdc(iot, ioh, type->sectrac); /* sectors/track */
|
|
out_fdc(iot, ioh, type->gap1); /* gap1 size */
|
|
out_fdc(iot, ioh, type->datalen); /* data length */
|
|
}
|
|
fdc->sc_state = IOCOMPLETE;
|
|
|
|
disk_busy(&fd->sc_dk);
|
|
|
|
/* allow 2 seconds for operation */
|
|
callout_reset(&fdc->sc_timo_ch, 2 * hz, fdctimeout, fdc);
|
|
return 1; /* will return later */
|
|
|
|
case DOCOPY:
|
|
docopy:
|
|
DPRINTF(("fdcintr: DOCOPY:\n"));
|
|
type = fd->sc_type;
|
|
head = (fd->sc_blkno
|
|
% (type->seccyl * (1 << (type->secsize - 2))))
|
|
/ (type->sectrac * (1 << (type->secsize - 2)));
|
|
pos = fd->sc_blkno %
|
|
(type->sectrac * (1 << (type->secsize - 2)));
|
|
sec = pos / (1 << (type->secsize - 2));
|
|
fdc_dmastart(fdc, B_READ, fd->sc_copybuf, 1024);
|
|
out_fdc(iot, ioh, NE7CMD_READ); /* READ */
|
|
out_fdc(iot, ioh, (head << 2) | fd->sc_drive);
|
|
out_fdc(iot, ioh, bp->b_cylinder); /* cylinder */
|
|
out_fdc(iot, ioh, head);
|
|
out_fdc(iot, ioh, sec + 1); /* sector +1 */
|
|
out_fdc(iot, ioh, type->secsize); /* sector size */
|
|
out_fdc(iot, ioh, type->sectrac); /* sectors/track */
|
|
out_fdc(iot, ioh, type->gap1); /* gap1 size */
|
|
out_fdc(iot, ioh, type->datalen); /* data length */
|
|
fdc->sc_state = COPYCOMPLETE;
|
|
/* allow 2 seconds for operation */
|
|
callout_reset(&fdc->sc_timo_ch, 2 * hz, fdctimeout, fdc);
|
|
return 1; /* will return later */
|
|
|
|
case DOIOHALF:
|
|
doiohalf:
|
|
DPRINTF((" DOIOHALF:\n"));
|
|
|
|
type = fd->sc_type;
|
|
sectrac = type->sectrac;
|
|
pos = fd->sc_blkno % (sectrac * (1 << (type->secsize - 2)));
|
|
sec = pos / (1 << (type->secsize - 2));
|
|
head = (fd->sc_blkno
|
|
% (type->seccyl * (1 << (type->secsize - 2))))
|
|
/ (type->sectrac * (1 << (type->secsize - 2)));
|
|
#ifdef DIAGNOSTIC
|
|
{
|
|
int block;
|
|
block = ((fd->sc_cylin * type->heads + head) *
|
|
type->sectrac + sec) * (1 << (type->secsize - 2));
|
|
block += (fd->sc_part == SEC_P01) ? 1 : 0;
|
|
if (block != fd->sc_blkno) {
|
|
printf("fdcintr: block %d != blkno %" PRId64
|
|
"\n",
|
|
block, fd->sc_blkno);
|
|
#ifdef DDB
|
|
Debugger();
|
|
#endif
|
|
}
|
|
}
|
|
#endif
|
|
if ((read = bp->b_flags & B_READ)) {
|
|
memcpy((char *)bp->b_data + fd->sc_skip, fd->sc_copybuf
|
|
+ (fd->sc_part & SEC_P01 ? FDC_BSIZE : 0),
|
|
FDC_BSIZE);
|
|
fdc->sc_state = IOCOMPLETE;
|
|
goto iocomplete2;
|
|
} else {
|
|
memcpy((char *)fd->sc_copybuf
|
|
+ (fd->sc_part & SEC_P01 ? FDC_BSIZE : 0),
|
|
(char *)bp->b_data + fd->sc_skip, FDC_BSIZE);
|
|
fdc_dmastart(fdc, read, fd->sc_copybuf, 1024);
|
|
}
|
|
out_fdc(iot, ioh, NE7CMD_WRITE); /* WRITE */
|
|
out_fdc(iot, ioh, (head << 2) | fd->sc_drive);
|
|
out_fdc(iot, ioh, bp->b_cylinder); /* cylinder */
|
|
out_fdc(iot, ioh, head);
|
|
out_fdc(iot, ioh, sec + 1); /* sector +1 */
|
|
out_fdc(iot, ioh, fd->sc_type->secsize); /* sector size */
|
|
out_fdc(iot, ioh, sectrac); /* sectors/track */
|
|
out_fdc(iot, ioh, fd->sc_type->gap1); /* gap1 size */
|
|
out_fdc(iot, ioh, fd->sc_type->datalen); /* data length */
|
|
fdc->sc_state = IOCOMPLETE;
|
|
/* allow 2 seconds for operation */
|
|
callout_reset(&fdc->sc_timo_ch, 2 * hz, fdctimeout, fdc);
|
|
return 1; /* will return later */
|
|
|
|
case SEEKWAIT:
|
|
callout_stop(&fdc->sc_timo_ch);
|
|
fdc->sc_state = SEEKCOMPLETE;
|
|
/* allow 1/50 second for heads to settle */
|
|
#if 0
|
|
callout_reset(&fdc->sc_intr_ch, hz / 50, fdcpseudointr, fdc);
|
|
#endif
|
|
return 1;
|
|
|
|
case SEEKCOMPLETE:
|
|
/* Make sure seek really happened */
|
|
DPRINTF(("fdcintr: SEEKCOMPLETE: FDC status = %x\n",
|
|
bus_space_read_1(fdc->sc_iot, fdc->sc_ioh, fdsts)));
|
|
out_fdc(iot, ioh, NE7CMD_SENSEI);
|
|
tmp = fdcresult(fdc);
|
|
if ((st0 & 0xf8) == 0xc0) {
|
|
DPRINTF(("fdcintr: first seek!\n"));
|
|
fdc->sc_state = DORECAL;
|
|
goto loop;
|
|
} else if (tmp != 2 ||
|
|
(st0 & 0xf8) != 0x20 ||
|
|
cyl != bp->b_cylinder) {
|
|
#ifdef FDDEBUG
|
|
fdcstatus(fd->sc_dev, 2, "seek failed");
|
|
#endif
|
|
fdcretry(fdc);
|
|
goto loop;
|
|
}
|
|
fd->sc_cylin = bp->b_cylinder;
|
|
goto doio;
|
|
|
|
case IOTIMEDOUT:
|
|
fdc_dmaabort(fdc);
|
|
case SEEKTIMEDOUT:
|
|
case RECALTIMEDOUT:
|
|
case RESETTIMEDOUT:
|
|
fdcretry(fdc);
|
|
goto loop;
|
|
|
|
case IOCOMPLETE: /* IO DONE, post-analyze */
|
|
callout_stop(&fdc->sc_timo_ch);
|
|
DPRINTF(("fdcintr: in IOCOMPLETE\n"));
|
|
if ((tmp = fdcresult(fdc)) != 7 || (st0 & 0xf8) != 0) {
|
|
fdc_dmaabort(fdc);
|
|
fdcstatus(fd->sc_dev, tmp, bp->b_flags & B_READ ?
|
|
"read failed" : "write failed");
|
|
printf("blkno %" PRId64 " nblks %d\n",
|
|
fd->sc_blkno, fd->sc_nblks);
|
|
fdcretry(fdc);
|
|
goto loop;
|
|
}
|
|
iocomplete2:
|
|
if (fdc->sc_errors) {
|
|
diskerr(bp, "fd", "soft error (corrected)", LOG_PRINTF,
|
|
fd->sc_skip / FDC_BSIZE, (struct disklabel *)NULL);
|
|
printf("\n");
|
|
fdc->sc_errors = 0;
|
|
}
|
|
fd->sc_blkno += fd->sc_nblks;
|
|
fd->sc_skip += fd->sc_nbytes;
|
|
fd->sc_bcount -= fd->sc_nbytes;
|
|
DPRINTF(("fd->sc_bcount = %d\n", fd->sc_bcount));
|
|
if (finfo == NULL && fd->sc_bcount > 0) {
|
|
bp->b_cylinder = fd->sc_blkno
|
|
/ (fd->sc_type->seccyl
|
|
* (1 << (fd->sc_type->secsize - 2)));
|
|
goto doseek;
|
|
}
|
|
fdfinish(fd, bp);
|
|
goto loop;
|
|
|
|
case COPYCOMPLETE: /* IO DONE, post-analyze */
|
|
DPRINTF(("fdcintr: COPYCOMPLETE:"));
|
|
callout_stop(&fdc->sc_timo_ch);
|
|
if ((tmp = fdcresult(fdc)) != 7 || (st0 & 0xf8) != 0) {
|
|
printf("fdcintr: resnum=%d, st0=%x\n", tmp, st0);
|
|
fdc_dmaabort(fdc);
|
|
fdcstatus(fd->sc_dev, 7, bp->b_flags & B_READ ?
|
|
"read failed" : "write failed");
|
|
printf("blkno %" PRId64 " nblks %d\n",
|
|
fd->sc_blkno, fd->sc_nblks);
|
|
fdcretry(fdc);
|
|
goto loop;
|
|
}
|
|
goto doiohalf;
|
|
|
|
case DORESET:
|
|
DPRINTF(("fdcintr: in DORESET\n"));
|
|
/* try a reset, keep motor on */
|
|
fd_set_motor(fdc, 1);
|
|
DELAY(100);
|
|
fd_set_motor(fdc, 0);
|
|
fdc->sc_state = RESETCOMPLETE;
|
|
callout_reset(&fdc->sc_timo_ch, hz / 2, fdctimeout, fdc);
|
|
return 1; /* will return later */
|
|
|
|
case RESETCOMPLETE:
|
|
DPRINTF(("fdcintr: in RESETCOMPLETE\n"));
|
|
callout_stop(&fdc->sc_timo_ch);
|
|
/* clear the controller output buffer */
|
|
for (i = 0; i < 4; i++) {
|
|
out_fdc(iot, ioh, NE7CMD_SENSEI);
|
|
(void)fdcresult(fdc);
|
|
}
|
|
|
|
/* fall through */
|
|
case DORECAL:
|
|
DPRINTF(("fdcintr: in DORECAL\n"));
|
|
out_fdc(iot, ioh, NE7CMD_RECAL); /* recalibrate function */
|
|
out_fdc(iot, ioh, fd->sc_drive);
|
|
fdc->sc_state = RECALWAIT;
|
|
callout_reset(&fdc->sc_timo_ch, 5 * hz, fdctimeout, fdc);
|
|
return 1; /* will return later */
|
|
|
|
case RECALWAIT:
|
|
DPRINTF(("fdcintr: in RECALWAIT\n"));
|
|
callout_stop(&fdc->sc_timo_ch);
|
|
fdc->sc_state = RECALCOMPLETE;
|
|
/* allow 1/30 second for heads to settle */
|
|
#if 0
|
|
callout_reset(&fdc->sc_intr_ch, hz / 30, fdcpseudointr, fdc);
|
|
#endif
|
|
return 1; /* will return later */
|
|
|
|
case RECALCOMPLETE:
|
|
DPRINTF(("fdcintr: in RECALCOMPLETE\n"));
|
|
out_fdc(iot, ioh, NE7CMD_SENSEI);
|
|
tmp = fdcresult(fdc);
|
|
if ((st0 & 0xf8) == 0xc0) {
|
|
DPRINTF(("fdcintr: first seek!\n"));
|
|
fdc->sc_state = DORECAL;
|
|
goto loop;
|
|
} else if (tmp != 2 || (st0 & 0xf8) != 0x20 || cyl != 0) {
|
|
#ifdef FDDEBUG
|
|
fdcstatus(fd->sc_dev, 2, "recalibrate failed");
|
|
#endif
|
|
fdcretry(fdc);
|
|
goto loop;
|
|
}
|
|
fd->sc_cylin = 0;
|
|
goto doseek;
|
|
|
|
case MOTORWAIT:
|
|
#if 0 /* on x68k motor on triggers interrupts by state change of ready line. */
|
|
if (fd->sc_flags & FD_MOTOR_WAIT)
|
|
return 1; /* time's not up yet */
|
|
#else
|
|
/* check drive ready by state change interrupt */
|
|
KASSERT(fd->sc_flags & FD_MOTOR_WAIT);
|
|
out_fdc(iot, ioh, NE7CMD_SENSEI);
|
|
tmp = fdcresult(fdc);
|
|
if (tmp != 2 || (st0 & 0xc0) != 0xc0 /* ready changed */) {
|
|
printf("%s: unexpected interrupt during MOTORWAIT",
|
|
device_xname(fd->sc_dev));
|
|
fdcpstatus(7, fdc);
|
|
return 1;
|
|
}
|
|
fd->sc_flags &= ~FD_MOTOR_WAIT;
|
|
#endif
|
|
goto doseek;
|
|
|
|
default:
|
|
fdcstatus(fd->sc_dev, 0, "stray interrupt");
|
|
return 1;
|
|
}
|
|
#ifdef DIAGNOSTIC
|
|
panic("fdcintr: impossible");
|
|
#endif
|
|
#undef st0
|
|
#undef cyl
|
|
}
|
|
|
|
void
|
|
fdcretry(struct fdc_softc *fdc)
|
|
{
|
|
struct fd_softc *fd;
|
|
struct buf *bp;
|
|
|
|
DPRINTF(("fdcretry:\n"));
|
|
fd = TAILQ_FIRST(&fdc->sc_drives);
|
|
bp = bufq_peek(fd->sc_q);
|
|
|
|
if (fd->sc_opts & FDOPT_NORETRY)
|
|
goto fail;
|
|
|
|
switch (fdc->sc_errors) {
|
|
case 0:
|
|
/* try again */
|
|
fdc->sc_state = SEEKCOMPLETE;
|
|
break;
|
|
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
/* didn't work; try recalibrating */
|
|
fdc->sc_state = DORECAL;
|
|
break;
|
|
|
|
case 4:
|
|
/* still no go; reset the bastard */
|
|
fdc->sc_state = DORESET;
|
|
break;
|
|
|
|
default:
|
|
fail:
|
|
if ((fd->sc_opts & FDOPT_SILENT) == 0) {
|
|
diskerr(bp, "fd", "hard error", LOG_PRINTF,
|
|
fd->sc_skip, (struct disklabel *)NULL);
|
|
fdcpstatus(7, fdc);
|
|
}
|
|
|
|
bp->b_error = EIO;
|
|
fdfinish(fd, bp);
|
|
}
|
|
fdc->sc_errors++;
|
|
}
|
|
|
|
int
|
|
fdioctl(dev_t dev, u_long cmd, void *addr, int flag, struct lwp *l)
|
|
{
|
|
struct fd_softc *fd = device_lookup_private(&fd_cd, FDUNIT(dev));
|
|
struct fdc_softc *fdc = device_private(device_parent(fd->sc_dev));
|
|
struct fdformat_parms *form_parms;
|
|
struct fdformat_cmd *form_cmd;
|
|
struct ne7_fd_formb *fd_formb;
|
|
int part = DISKPART(dev);
|
|
struct disklabel buffer;
|
|
int error;
|
|
unsigned int scratch;
|
|
int il[FD_MAX_NSEC + 1];
|
|
int i, j;
|
|
|
|
DPRINTF(("fdioctl:"));
|
|
switch (cmd) {
|
|
case DIOCGDINFO:
|
|
DPRINTF(("DIOCGDINFO\n"));
|
|
#if 1
|
|
*(struct disklabel *)addr = *fd->sc_dk.dk_label;
|
|
return 0;
|
|
#else
|
|
memset(&buffer, 0, sizeof(buffer));
|
|
|
|
buffer.d_secpercyl = fd->sc_type->seccyl;
|
|
buffer.d_type = DTYPE_FLOPPY;
|
|
buffer.d_secsize = 128 << fd->sc_type->secsize;
|
|
|
|
if (readdisklabel(dev, fdstrategy, &buffer, NULL) != NULL)
|
|
return EINVAL;
|
|
|
|
*(struct disklabel *)addr = buffer;
|
|
return 0;
|
|
#endif
|
|
|
|
case DIOCGPART:
|
|
DPRINTF(("DIOCGPART\n"));
|
|
((struct partinfo *)addr)->disklab = fd->sc_dk.dk_label;
|
|
((struct partinfo *)addr)->part =
|
|
&fd->sc_dk.dk_label->d_partitions[part];
|
|
return 0;
|
|
|
|
case DIOCWLABEL:
|
|
DPRINTF(("DIOCWLABEL\n"));
|
|
if ((flag & FWRITE) == 0)
|
|
return EBADF;
|
|
/* XXX do something */
|
|
return 0;
|
|
|
|
case DIOCWDINFO:
|
|
DPRINTF(("DIOCWDINFO\n"));
|
|
if ((flag & FWRITE) == 0)
|
|
return EBADF;
|
|
|
|
error = setdisklabel(&buffer, (struct disklabel *)addr,
|
|
0, NULL);
|
|
if (error)
|
|
return error;
|
|
|
|
error = writedisklabel(dev, fdstrategy, &buffer, NULL);
|
|
return error;
|
|
|
|
case FDIOCGETFORMAT:
|
|
DPRINTF(("FDIOCGETFORMAT\n"));
|
|
form_parms = (struct fdformat_parms *)addr;
|
|
form_parms->fdformat_version = FDFORMAT_VERSION;
|
|
form_parms->nbps = 128 * (1 << fd->sc_type->secsize);
|
|
form_parms->ncyl = fd->sc_type->cyls;
|
|
form_parms->nspt = fd->sc_type->sectrac;
|
|
form_parms->ntrk = fd->sc_type->heads;
|
|
form_parms->stepspercyl = fd->sc_type->step;
|
|
form_parms->gaplen = fd->sc_type->gap2;
|
|
form_parms->fillbyte = fd->sc_type->fillbyte;
|
|
form_parms->interleave = fd->sc_type->interleave;
|
|
switch (fd->sc_type->rate) {
|
|
case FDC_500KBPS:
|
|
form_parms->xfer_rate = 500 * 1024;
|
|
break;
|
|
case FDC_300KBPS:
|
|
form_parms->xfer_rate = 300 * 1024;
|
|
break;
|
|
case FDC_250KBPS:
|
|
form_parms->xfer_rate = 250 * 1024;
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
return 0;
|
|
|
|
case FDIOCSETFORMAT:
|
|
DPRINTF(("FDIOCSETFORMAT\n"));
|
|
if((flag & FWRITE) == 0)
|
|
return EBADF; /* must be opened for writing */
|
|
form_parms = (struct fdformat_parms *)addr;
|
|
if (form_parms->fdformat_version != FDFORMAT_VERSION)
|
|
return EINVAL; /* wrong version of formatting prog */
|
|
|
|
scratch = form_parms->nbps >> 7;
|
|
if ((form_parms->nbps & 0x7f) || ffs(scratch) == 0 ||
|
|
scratch & ~(1 << (ffs(scratch) - 1)))
|
|
/* not a power-of-two multiple of 128 */
|
|
return EINVAL;
|
|
|
|
switch (form_parms->xfer_rate) {
|
|
case 500 * 1024:
|
|
fd->sc_type->rate = FDC_500KBPS;
|
|
break;
|
|
case 300 * 1024:
|
|
fd->sc_type->rate = FDC_300KBPS;
|
|
break;
|
|
case 250 * 1024:
|
|
fd->sc_type->rate = FDC_250KBPS;
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
|
|
if (form_parms->nspt > FD_MAX_NSEC ||
|
|
form_parms->fillbyte > 0xff ||
|
|
form_parms->interleave > 0xff)
|
|
return EINVAL;
|
|
fd->sc_type->sectrac = form_parms->nspt;
|
|
if (form_parms->ntrk != 2 && form_parms->ntrk != 1)
|
|
return EINVAL;
|
|
fd->sc_type->heads = form_parms->ntrk;
|
|
fd->sc_type->seccyl = form_parms->nspt * form_parms->ntrk;
|
|
fd->sc_type->secsize = ffs(scratch)-1;
|
|
fd->sc_type->gap2 = form_parms->gaplen;
|
|
fd->sc_type->cyls = form_parms->ncyl;
|
|
fd->sc_type->size = fd->sc_type->seccyl * form_parms->ncyl *
|
|
form_parms->nbps / DEV_BSIZE;
|
|
fd->sc_type->step = form_parms->stepspercyl;
|
|
fd->sc_type->fillbyte = form_parms->fillbyte;
|
|
fd->sc_type->interleave = form_parms->interleave;
|
|
return 0;
|
|
|
|
case FDIOCFORMAT_TRACK:
|
|
DPRINTF(("FDIOCFORMAT_TRACK\n"));
|
|
if ((flag & FWRITE) == 0)
|
|
return EBADF; /* must be opened for writing */
|
|
form_cmd = (struct fdformat_cmd *)addr;
|
|
if (form_cmd->formatcmd_version != FDFORMAT_VERSION)
|
|
return EINVAL; /* wrong version of formatting prog */
|
|
|
|
if (form_cmd->head >= fd->sc_type->heads ||
|
|
form_cmd->cylinder >= fd->sc_type->cyls) {
|
|
return EINVAL;
|
|
}
|
|
|
|
fd_formb = malloc(sizeof(struct ne7_fd_formb),
|
|
M_TEMP, M_NOWAIT);
|
|
if (fd_formb == NULL)
|
|
return ENOMEM;
|
|
|
|
fd_formb->head = form_cmd->head;
|
|
fd_formb->cyl = form_cmd->cylinder;
|
|
fd_formb->transfer_rate = fd->sc_type->rate;
|
|
fd_formb->fd_formb_secshift = fd->sc_type->secsize;
|
|
fd_formb->fd_formb_nsecs = fd->sc_type->sectrac;
|
|
fd_formb->fd_formb_gaplen = fd->sc_type->gap2;
|
|
fd_formb->fd_formb_fillbyte = fd->sc_type->fillbyte;
|
|
|
|
memset(il, 0, sizeof il);
|
|
for (j = 0, i = 1; i <= fd_formb->fd_formb_nsecs; i++) {
|
|
while (il[(j % fd_formb->fd_formb_nsecs) + 1])
|
|
j++;
|
|
il[(j % fd_formb->fd_formb_nsecs)+ 1] = i;
|
|
j += fd->sc_type->interleave;
|
|
}
|
|
for (i = 0; i < fd_formb->fd_formb_nsecs; i++) {
|
|
fd_formb->fd_formb_cylno(i) = form_cmd->cylinder;
|
|
fd_formb->fd_formb_headno(i) = form_cmd->head;
|
|
fd_formb->fd_formb_secno(i) = il[i + 1];
|
|
fd_formb->fd_formb_secsize(i) = fd->sc_type->secsize;
|
|
}
|
|
|
|
error = fdformat(dev, fd_formb, l);
|
|
free(fd_formb, M_TEMP);
|
|
return error;
|
|
|
|
case FDIOCGETOPTS: /* get drive options */
|
|
DPRINTF(("FDIOCGETOPTS\n"));
|
|
*(int *)addr = fd->sc_opts;
|
|
return 0;
|
|
|
|
case FDIOCSETOPTS: /* set drive options */
|
|
DPRINTF(("FDIOCSETOPTS\n"));
|
|
fd->sc_opts = *(int *)addr;
|
|
return 0;
|
|
|
|
case DIOCLOCK:
|
|
/*
|
|
* Nothing to do here, really.
|
|
*/
|
|
return 0; /* XXX */
|
|
|
|
case DIOCEJECT:
|
|
DPRINTF(("DIOCEJECT\n"));
|
|
if (*(int *)addr == 0) {
|
|
/*
|
|
* Don't force eject: check that we are the only
|
|
* partition open. If so, unlock it.
|
|
*/
|
|
if ((fd->sc_dk.dk_openmask & ~(1 << part)) != 0 ||
|
|
fd->sc_dk.dk_bopenmask + fd->sc_dk.dk_copenmask !=
|
|
fd->sc_dk.dk_openmask) {
|
|
return EBUSY;
|
|
}
|
|
}
|
|
/* FALLTHROUGH */
|
|
case ODIOCEJECT:
|
|
DPRINTF(("ODIOCEJECT\n"));
|
|
fd_do_eject(fdc, FDUNIT(dev));
|
|
return 0;
|
|
|
|
default:
|
|
return ENOTTY;
|
|
}
|
|
|
|
#ifdef DIAGNOSTIC
|
|
panic("fdioctl: impossible");
|
|
#endif
|
|
}
|
|
|
|
int
|
|
fdformat(dev_t dev, struct ne7_fd_formb *finfo, struct lwp *l)
|
|
{
|
|
int rv = 0;
|
|
struct fd_softc *fd = device_lookup_private(&fd_cd, FDUNIT(dev));
|
|
struct fd_type *type = fd->sc_type;
|
|
struct buf *bp;
|
|
|
|
/* set up a buffer header for fdstrategy() */
|
|
bp = getiobuf(NULL, false);
|
|
if (bp == NULL)
|
|
return ENOBUFS;
|
|
|
|
bp->b_cflags = BC_BUSY;
|
|
bp->b_flags = B_PHYS | B_FORMAT;
|
|
bp->b_proc = l->l_proc;
|
|
bp->b_dev = dev;
|
|
|
|
/*
|
|
* calculate a fake blkno, so fdstrategy() would initiate a
|
|
* seek to the requested cylinder
|
|
*/
|
|
bp->b_blkno = (finfo->cyl * (type->sectrac * type->heads)
|
|
+ finfo->head * type->sectrac) * (128 << type->secsize) / DEV_BSIZE;
|
|
|
|
bp->b_bcount = sizeof(struct fd_idfield_data) * finfo->fd_formb_nsecs;
|
|
bp->b_data = (void *)finfo;
|
|
|
|
#ifdef FD_DEBUG
|
|
printf("fdformat: blkno %" PRIx64 " count %x\n",
|
|
bp->b_blkno, bp->b_bcount);
|
|
#endif
|
|
|
|
/* now do the format */
|
|
fdstrategy(bp);
|
|
|
|
/* ...and wait for it to complete */
|
|
rv = biowait(bp);
|
|
putiobuf(bp);
|
|
return rv;
|
|
}
|
|
|
|
void
|
|
fd_do_eject(struct fdc_softc *fdc, int unit)
|
|
{
|
|
|
|
bus_space_write_1(fdc->sc_iot, fdc->sc_ioh, fdout, 0x20 | (1 << unit));
|
|
DELAY(1); /* XXX */
|
|
bus_space_write_1(fdc->sc_iot, fdc->sc_ioh, fdout, 0x20);
|
|
}
|
|
|
|
/*
|
|
* Build disk label. For now we only create a label from what we know
|
|
* from 'sc'.
|
|
*/
|
|
static int
|
|
fdgetdisklabel(struct fd_softc *sc, dev_t dev)
|
|
{
|
|
struct disklabel *lp;
|
|
int part;
|
|
|
|
DPRINTF(("fdgetdisklabel()\n"));
|
|
|
|
part = DISKPART(dev);
|
|
lp = sc->sc_dk.dk_label;
|
|
memset(lp, 0, sizeof(struct disklabel));
|
|
|
|
lp->d_secsize = 128 << sc->sc_type->secsize;
|
|
lp->d_ntracks = sc->sc_type->heads;
|
|
lp->d_nsectors = sc->sc_type->sectrac;
|
|
lp->d_secpercyl = lp->d_ntracks * lp->d_nsectors;
|
|
lp->d_ncylinders = sc->sc_type->size / lp->d_secpercyl;
|
|
lp->d_secperunit = sc->sc_type->size;
|
|
|
|
lp->d_type = DTYPE_FLOPPY;
|
|
lp->d_rpm = 300; /* XXX */
|
|
lp->d_interleave = 1; /* FIXME: is this OK? */
|
|
lp->d_bbsize = 0;
|
|
lp->d_sbsize = 0;
|
|
lp->d_npartitions = part + 1;
|
|
#define STEP_DELAY 6000 /* 6ms (6000us) delay after stepping */
|
|
lp->d_trkseek = STEP_DELAY; /* XXX */
|
|
lp->d_magic = DISKMAGIC;
|
|
lp->d_magic2 = DISKMAGIC;
|
|
lp->d_checksum = dkcksum(lp);
|
|
lp->d_partitions[part].p_size = lp->d_secperunit;
|
|
lp->d_partitions[part].p_fstype = FS_UNUSED;
|
|
lp->d_partitions[part].p_fsize = 1024;
|
|
lp->d_partitions[part].p_frag = 8;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Mountroot hook: prompt the user to enter the root file system
|
|
* floppy.
|
|
*/
|
|
void
|
|
fd_mountroot_hook(device_t dev)
|
|
{
|
|
struct fd_softc *fd = device_private(dev);
|
|
struct fdc_softc *fdc = device_private(device_parent(fd->sc_dev));
|
|
int c;
|
|
|
|
/* XXX device_unit() abuse */
|
|
fd_do_eject(fdc, device_unit(dev));
|
|
printf("Insert filesystem floppy and press return.");
|
|
for (;;) {
|
|
c = cngetc();
|
|
if ((c == '\r') || (c == '\n')) {
|
|
printf("\n");
|
|
break;
|
|
}
|
|
}
|
|
}
|