Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/UPDATING

380 lines
12 KiB
Plaintext
Raw Blame History

$NetBSD: UPDATING,v 1.59 2002/04/29 08:36:20 lukem Exp $
This file is intended to be a brief introduction to the build
process and a reference on what to do if something doesn't work.
For a more detailed description see Makefile.
Recent changes:
^^^^^^^^^^^^^^^
20020426:
etc/postinstall added, which performs various checks for
configuration file updates and changes, and can fix most of
the problems identified.
This should make it much easier to upgrade a system's
configuration from earlier systems (as far back as NetBSD 1.5).
20020320:
<bsd.lib.mk> needs a new install(1) for it's "-a cmd" support.
build and install at usr.bin/xinstall before the build.
20020319:
raw IPv6 socket now makes strict checking for sa_family and sa_len
on send(2) operation. be sure to have sbin/rtsol and usr.sbin/rtsold
newer than November 2001 when you upgrade the kernel.
20020311:
ssh configuration files were moved from /etc to /etc/ssh. Beware
if you restart your machine from remote. Note that sshd.conf needs
to be changed (due to the use of "/etc" inside).
20020223:
Users of the VAX port will need to rebuild and install gas
so it deal with the now present register prefix used in all
the VAX assembly files.
20020118:
ntpd user/group has been added. Need to hand add this in or builds
will break as mtree aborts early.
Add the following into /etc/group:
ntpd:*:15:
and the following to /etc/master.passwd (via vipw):
ntpd:*:15:15::0:0:Ntpd pseudo-user:/var/chroot/ntpd:/sbin/nologin
20011207:
If you're attempting to build a snapshot on sparc64 and are getting
reloc errors from the toolchain groff binary this means your native
toolchain has some broken C++ bits.
To fix:
Build a new toolchain (i.e. build.sh -t)
Use the new toolchain to build and install natively (i.e. /usr/lib)
gnu/lib/libgcc
gnu/lib/libstdc++
After this a snapshot will be able to be built.
20011201:
In order for a sparc64 build to work you must have a working awk. If
you've built and installed a system with the new toolchain up to this
point you do not have a working awk as its ability to do floating
point is broken.
To build:
remake and install gnu/lib/libgcc
remake and install gnu/usr.bin/gawk into /usr/bin (make sure it links
against the new libgcc.a)
20011128:
Kernel config information was changed to use defflag in
the various "files" files. Bug fixes to config(8) are
required in order for this to work properly. Make sure
to build and install in usr.sbin/config before attempting
to build a new kernel.
20011030:
libc/locale/wcstod.c now needs new lint(1). Update lint(1)
before building libc.
20011029:
The new document BUILDING.mdoc (view with nroff | more, or
see pre-generated .txt and .html versions) describes the build
procedure in great detail. BUILDING, and the USE_NEW_TOOLCHAIN
build process, are intended in the long run to replace this
manual update log.
Users building a USE_NEW_TOOLCHAIN system should read the
BUILDING document for caveats. Generally, BUILDING supersedes
UPDATING for these systems, as tool updating is taken care of
by the new build system.
20011028:
src/etc/Makefile now needs install to be able to handle
symlinks that point to nowhere. A bug in install that
prevented this was corrected.
Solution: update and reinstall usr.bin/xinstall
Better Solution: Use the new toolchain and it will just work
for you.
20011006:
/etc/mtree/NetBSD.dist has been updated to take advantage of
absolute path support added to mtree(8). Older mtree(8)s don't
understand the format.
Solution: update and reinstall usr.sbin/mtree
20011004:
Crunchgen has been updated to work via reach-over makefiles. Updating
is suggested before running a snapshot build
20010915:
The new "ubcperf" code committed by Chuck Silvers removed
a header file, uvm/uvm_vnode.h. There may be stale .depend
files that still reference this file.
Solution: "make cleandir && make dependall" in affected
directories.
20010803:
grep.info is now built from grep.texi using makeinfo. Since it
requires makeinfo v4.0, you need to install new texinfo before
building gnu/usr.bin/grep. To install new texinfo, please follow
the instruction described in 20010726 entry.
20010803:
(i386 only): i386 kernel now uses new instructions like
`fxsave' which old gas doesn't understand. To build the
kernel successfully, you need to build and install new gas
(gnu/usr.bin/gas.new), or (temporarily) comment out
"options I686_CPU" from your kernel configuration until you
rebuilt your userland (and got a new gas).
20010731:
Bootloader update on ELF platforms. DDB in kernels from before
this will be unable to read symbol tables provided by newer
bootloaders.
20010726:
Texinfo was updated to 4.0. To avoid failures when trying to
build the included texinfo files, do:
cd src/gnu/usr.bin/texinfo
make MKINFO=no dependall install
20010718:
Enabled correct .init/.fini processing in crt0. The way this
was done was to change a -I directive to cc(1), which means
make(1) will have a stale dependency (it will be checking the
timestamp on the wrong "dot_init.h").
The symptom you will see is that new programs die with SIGSEGV
if you have a stale dependency.
Solution: "make cleandir" in both lib/csu and libexec/ld.elf_so
before starting your build.
20010628:
A construct was added to uvm_page.h that uncovered a bug
in lint(1). If you get a warning/error about a non-portable
bitfield, update your lint(1) before proceeding.
20010226:
Added named user/group to system. Need to hand add this in or builds
will break as mtree aborts early.
To work around add by hand:
named:*:14:
to /etc/group and add:
named:*:14:14::0:0:Named pseudo-user:/var/named:/sbin/nologin
to master.passwd (use vipw for instance if doing by hand).
Now a make build should progress.
20010219:
get/setprogname() added. Any hostprogs that may use this will need
to be bootstrapped manually until the host system is current.
Known problems: sys/arch/macppc/stand/fixcoff
usr.sbin/config (adding -DMAKE_BOOTSTRAP to
CFLAGS and rebuilding should work)
usr.sbin/mdsetimage - Build a static copy if
building a snapshot before fully bootstrapped.
20010204:
prepare the code to compile with stricter gcc flags. in
particular start eliminating redundant declarations. Yacc
needs to be installed before make build.
20010114:
introduce .if commands(target) in make(1). You need to
bring everything up-to-date first, then without installing
anything make and install in usr.bin/make, then proceed
with make build.
20010101:
bsd.subdir.mk committed 20001230 had a bug which caused
afterinstall targets to run too soon; update again.
20001230:
New share/mk files needed to support .WAIT in SUBDIR variables.
If you get make errors,
(cd share/mk; make install)
Also, PRINTOBJDIR has changed and is now used more heavily.
20001019:
The `ca' device driver has been replaced by `ld'; although the
major and minor numbers haven't changed, you should update your /dev
directory.
20000929:
The following make directives are obsoleted.
MKCRYPTO_RSA NOCRYPTO_RSA NOCRYPTO_RC5 NOCRYPTO_IDEA
By default, RSA is built into libcrypto. IDEA and RC5 will not be
built into libcrypto. By using MKCRYPTO_{RC5,IDEA}, you can build
additional library libcrypto_{idea,rc5}.
Hints for a more successful build:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Build a new kernel first:
This makes sure that any new system calls or features
expected by the new userland will be present. This
helps to avoid critical errors when upgrading.
Use object directories:
This helps to keep stale object
files from polluting the build if a Makefile "forgets"
about one. It also makes it easier to clean up after
a build. It's also necessary if you want to use the
same source tree for multiple machines.
To use object directories:
a) cd /usr/src ; make cleandir
b) Add "OBJMACHINE=yes" to /etc/mk.conf
c) Add "MKOBJDIRS=yes" to /etc/mk.conf
d) cd /usr/src ; make build
Note that running "make obj" in a directory will create
in obj.$MACHINE directory.
Build to a DESTDIR:
This helps to keep old
installed files (especially libraries) from interfering
with the new build.
To build to a DESTDIR, set the DESTDIR environment
variable before running make build. It should be set to
the pathname of an initially empty directory.
Problems: you might need to update critical utilities
without using DESTDIR since nothing is executed
from what is installed in DESTDIR.
(See critical utils, below)
Build often:
This keeps critical utilities current enough to not choke
on any other part of the source tree that depends on up to
date functionality.
What to do if things don't work:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
When things don't work there is usually a few things that commonly
should be done.
1) make includes
This should be done automatically by make build.
2) cd share/mk && make install
Again, automatically done by make build.
Failsafe rebuild of a small part of the tree:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
To make sure you rebuild something correctly you want to do
something like the following:
1) Make sure the includes and .mk files are up to date.
2) Make sure any program used to build the particular
utility is up to date. (yacc, lex, etc...)
3) cd ...path/to/util...
make cleandir
rm ...all obj directories...
make cleandir # yes, again
make obj
make depend && make
Failsafe rebuild of the entire tree:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If you really want to make sure the source tree is clean and
ready for a build try the following. Note that sourcing /etc/mk.conf
(a make(1) Makefile) in this manner is not right, and will not work
for anyone who uses any make(1) features in /etc/mk.conf.
---cut here---
#!/bin/sh
. /etc/mk.conf
if [ -z $NETBSDSRCDIR ] ; then
NETBSDSRCDIR=/usr/src
fi
if [ \! -d $NETBSDSRCDIR ] ; then
echo Unable to find sources
exit 1
fi
find $NETBSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;
if [ -z $BSDOBJDIR ] ; then
BSDOBJDIR=/usr/obj
fi
if [ -d $BSDOBJDIR ] ; then
rm -rf $BSDOBJDIR
fi
cd $NETBSDSRCDIR && make cleandir
---cut here---
Critical utilities:
^^^^^^^^^^^^^^^^^^^
gnu/usr.bin/egcs
usr.bin/compile_et
usr.bin/make
usr.bin/yacc
usr.bin/lex
usr.bin/xlint
usr.sbin/config
Other problems and possible solutions:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Symptom:Unreasonable compiler errors.
Fix: Rebuild gnu/usr.bin/egcs
Symptom:Complaints involving a Makefile.
Fix: Rebuild usr.bin/make:
cd usr.bin/make && make && make install
Or, a failsafe method if that doesn't work:
cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin
Fix: Make sure .mk files are up to date.
cd share/mk && make install
Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
Fix: Rebuild usr.sbin/config
Symptom:
Fix: Rebuild usr.bin/yacc
Symptom:
Fix: Rebuild usr.bin/lex
Symptom:
Fix: rm /usr/lib/libbfd.a
Symptom:Obsolete intermediate files are used during compilation
Fix: Try the following sequence of commands in the directory in question.
make cleandir; rm `make print-objdir`; make cleandir; make obj
(If you built the tree without "make obj" in the past, obsolete files
may remain. The command tries to clean everything up)
Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible pointer type
Fix: Rebuild and install usr.bin/menuc
Symptom:mklocale not found during build in share/locale/ctype
Fix: Build and install usr.bin/mklocale
Symptom:undefined reference to `__assert13'
Fix: Rebuild and install lib/libc
Symptom:usr.sbin/config fails to build.
Fix: Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
Symptom:undefined reference to `getprogname' or `setprogname'
Fix: Rebuild and install lib/libc
Symptom:lint does not understand the '-X' option
Fix: May need to build & install libs with NOLINT=1 before rebuilding lint
Reference in New Issue View Git Blame Copy Permalink