305 lines
7.5 KiB
C
305 lines
7.5 KiB
C
typedef u_int8_t physaddr[4];
|
|
typedef u_int8_t physlen[4];
|
|
#define ltophys _lto4l
|
|
#define phystol _4ltol
|
|
|
|
/*
|
|
* I/O port offsets
|
|
*/
|
|
#define BT_CTRL_PORT 0 /* control (wo) */
|
|
#define BT_STAT_PORT 0 /* status (ro) */
|
|
#define BT_CMD_PORT 1 /* command (wo) */
|
|
#define BT_DATA_PORT 1 /* data (ro) */
|
|
#define BT_INTR_PORT 2 /* interrupt status (ro) */
|
|
|
|
/*
|
|
* BT_CTRL bits
|
|
*/
|
|
#define BT_CTRL_HRST 0x80 /* Hardware reset */
|
|
#define BT_CTRL_SRST 0x40 /* Software reset */
|
|
#define BT_CTRL_IRST 0x20 /* Interrupt reset */
|
|
#define BT_CTRL_SCRST 0x10 /* SCSI bus reset */
|
|
|
|
/*
|
|
* BT_STAT bits
|
|
*/
|
|
#define BT_STAT_STST 0x80 /* Self test in Progress */
|
|
#define BT_STAT_DIAGF 0x40 /* Diagnostic Failure */
|
|
#define BT_STAT_INIT 0x20 /* Mbx Init required */
|
|
#define BT_STAT_IDLE 0x10 /* Host Adapter Idle */
|
|
#define BT_STAT_CDF 0x08 /* cmd/data out port full */
|
|
#define BT_STAT_DF 0x04 /* Data in port full */
|
|
#define BT_STAT_INVDCMD 0x01 /* Invalid command */
|
|
|
|
/*
|
|
* BT_CMD opcodes
|
|
*/
|
|
#define BT_NOP 0x00 /* No operation */
|
|
#define BT_MBX_INIT 0x01 /* Mbx initialization */
|
|
#define BT_START_SCSI 0x02 /* start scsi command */
|
|
#define BT_INQUIRE_REVISION 0x04 /* Adapter Inquiry */
|
|
#define BT_MBO_INTR_EN 0x05 /* Enable MBO available interrupt */
|
|
/*#define BT_SEL_TIMEOUT_SET 0x06 /* set selection time-out */
|
|
/*#define BT_BUS_ON_TIME_SET 0x07 /* set bus-on time */
|
|
/*#define BT_BUS_OFF_TIME_SET 0x08 /* set bus-off time */
|
|
/*#define BT_SPEED_SET 0x09 /* set transfer speed */
|
|
#define BT_INQUIRE_DEVICES 0x0a /* return installed devices 0-7 */
|
|
#define BT_INQUIRE_CONFIG 0x0b /* return configuration data */
|
|
#define BT_TARGET_EN 0x0c /* enable target mode */
|
|
#define BT_INQUIRE_SETUP 0x0d /* return setup data */
|
|
#define BT_ECHO 0x1e /* Echo command data */
|
|
#define BT_INQUIRE_DEVICES_2 0x23 /* return installed devices 8-15 */
|
|
#define BT_MBX_INIT_EXTENDED 0x81 /* Mbx initialization */
|
|
#define BT_INQUIRE_REVISION_3 0x84 /* Get 3rd firmware version byte */
|
|
#define BT_INQUIRE_REVISION_4 0x85 /* Get 4th firmware version byte */
|
|
#define BT_INQUIRE_MODEL 0x8b /* Get hardware ID and revision */
|
|
#define BT_INQUIRE_PERIOD 0x8c /* Get synchronous period */
|
|
#define BT_INQUIRE_EXTENDED 0x8d /* Adapter Setup Inquiry */
|
|
#define BT_ROUND_ROBIN 0x8f /* Enable/Disable(default) round robin */
|
|
|
|
/*
|
|
* BT_INTR bits
|
|
*/
|
|
#define BT_INTR_ANYINTR 0x80 /* Any interrupt */
|
|
#define BT_INTR_SCRD 0x08 /* SCSI reset detected */
|
|
#define BT_INTR_HACC 0x04 /* Command complete */
|
|
#define BT_INTR_MBOA 0x02 /* MBX out empty */
|
|
#define BT_INTR_MBIF 0x01 /* MBX in full */
|
|
|
|
struct bt_mbx_out {
|
|
physaddr ccb_addr;
|
|
u_char dummy[3];
|
|
u_char cmd;
|
|
};
|
|
|
|
struct bt_mbx_in {
|
|
physaddr ccb_addr;
|
|
u_char dummy[3];
|
|
u_char stat;
|
|
};
|
|
|
|
/*
|
|
* mbo.cmd values
|
|
*/
|
|
#define BT_MBO_FREE 0x0 /* MBO entry is free */
|
|
#define BT_MBO_START 0x1 /* MBO activate entry */
|
|
#define BT_MBO_ABORT 0x2 /* MBO abort entry */
|
|
|
|
/*
|
|
* mbi.stat values
|
|
*/
|
|
#define BT_MBI_FREE 0x0 /* MBI entry is free */
|
|
#define BT_MBI_OK 0x1 /* completed without error */
|
|
#define BT_MBI_ABORT 0x2 /* aborted ccb */
|
|
#define BT_MBI_UNKNOWN 0x3 /* Tried to abort invalid CCB */
|
|
#define BT_MBI_ERROR 0x4 /* Completed with error */
|
|
|
|
#if defined(BIG_DMA)
|
|
WARNING...THIS WON'T WORK(won't fit on 1 page)
|
|
/* #define BT_NSEG 2048 /* Number of scatter gather segments - to much vm */
|
|
#define BT_NSEG 128
|
|
#else
|
|
#define BT_NSEG 33
|
|
#endif /* BIG_DMA */
|
|
|
|
struct bt_scat_gath {
|
|
physlen seg_len;
|
|
physaddr seg_addr;
|
|
};
|
|
|
|
struct bt_ccb {
|
|
u_char opcode;
|
|
u_char:3, data_in:1, data_out:1,:3;
|
|
u_char scsi_cmd_length;
|
|
u_char req_sense_length;
|
|
/*------------------------------------longword boundary */
|
|
physlen data_length;
|
|
/*------------------------------------longword boundary */
|
|
physaddr data_addr;
|
|
/*------------------------------------longword boundary */
|
|
u_char dummy1[2];
|
|
u_char host_stat;
|
|
u_char target_stat;
|
|
/*------------------------------------longword boundary */
|
|
u_char target;
|
|
u_char lun;
|
|
struct scsi_generic scsi_cmd;
|
|
u_char dummy2[1];
|
|
u_char link_id;
|
|
/*------------------------------------longword boundary */
|
|
physaddr link_addr;
|
|
/*------------------------------------longword boundary */
|
|
physaddr sense_ptr;
|
|
/*-----end of HW fields-----------------------longword boundary */
|
|
struct scsi_sense_data scsi_sense;
|
|
/*------------------------------------longword boundary */
|
|
struct bt_scat_gath scat_gath[BT_NSEG];
|
|
/*------------------------------------longword boundary */
|
|
TAILQ_ENTRY(bt_ccb) chain;
|
|
struct bt_ccb *nexthash;
|
|
long hashkey;
|
|
struct scsi_xfer *xs; /* the scsi_xfer for this cmd */
|
|
int flags;
|
|
#define CCB_ALLOC 0x01
|
|
#define CCB_ABORT 0x02
|
|
#ifdef BTDIAG
|
|
#define CCB_SENDING 0x04
|
|
#endif
|
|
int timeout;
|
|
};
|
|
|
|
/*
|
|
* opcode fields
|
|
*/
|
|
#define BT_INITIATOR_CCB 0x00 /* SCSI Initiator CCB */
|
|
#define BT_TARGET_CCB 0x01 /* SCSI Target CCB */
|
|
#define BT_INIT_SCAT_GATH_CCB 0x02 /* SCSI Initiator with scattter gather */
|
|
#define BT_RESET_CCB 0x81 /* SCSI Bus reset */
|
|
|
|
/*
|
|
* bt_ccb.host_stat values
|
|
*/
|
|
#define BT_OK 0x00 /* cmd ok */
|
|
#define BT_LINK_OK 0x0a /* Link cmd ok */
|
|
#define BT_LINK_IT 0x0b /* Link cmd ok + int */
|
|
#define BT_SEL_TIMEOUT 0x11 /* Selection time out */
|
|
#define BT_OVER_UNDER 0x12 /* Data over/under run */
|
|
#define BT_BUS_FREE 0x13 /* Bus dropped at unexpected time */
|
|
#define BT_INV_BUS 0x14 /* Invalid bus phase/sequence */
|
|
#define BT_BAD_MBO 0x15 /* Incorrect MBO cmd */
|
|
#define BT_BAD_CCB 0x16 /* Incorrect ccb opcode */
|
|
#define BT_BAD_LINK 0x17 /* Not same values of LUN for links */
|
|
#define BT_INV_TARGET 0x18 /* Invalid target direction */
|
|
#define BT_CCB_DUP 0x19 /* Duplicate CCB received */
|
|
#define BT_INV_CCB 0x1a /* Invalid CCB or segment list */
|
|
|
|
struct bt_extended_inquire {
|
|
struct {
|
|
u_char opcode;
|
|
u_char len;
|
|
} cmd;
|
|
struct {
|
|
u_char bus_type; /* Type of bus connected to */
|
|
#define BT_BUS_TYPE_24BIT 'A' /* ISA bus */
|
|
#define BT_BUS_TYPE_32BIT 'E' /* EISA/VLB/PCI bus */
|
|
#define BT_BUS_TYPE_MCA 'M' /* MicroChannel bus */
|
|
u_char bios_address; /* Address of adapter BIOS */
|
|
u_short max_segment; /* ? */
|
|
} reply;
|
|
};
|
|
|
|
struct bt_config {
|
|
struct {
|
|
u_char opcode;
|
|
} cmd;
|
|
struct {
|
|
u_char chan;
|
|
u_char intr;
|
|
u_char scsi_dev:3;
|
|
u_char :5;
|
|
} reply;
|
|
};
|
|
|
|
struct bt_toggle {
|
|
struct {
|
|
u_char opcode;
|
|
u_char enable;
|
|
} cmd;
|
|
};
|
|
|
|
struct bt_mailbox {
|
|
struct {
|
|
u_char opcode;
|
|
u_char nmbx;
|
|
physaddr addr;
|
|
} cmd;
|
|
};
|
|
|
|
struct bt_model {
|
|
struct {
|
|
u_char opcode;
|
|
u_char len;
|
|
} cmd;
|
|
struct {
|
|
u_char id[4]; /* i.e bt742a -> '7','4','2','A' */
|
|
u_char version[2]; /* i.e Board Revision 'H' -> 'H', 0x00 */
|
|
} reply;
|
|
};
|
|
|
|
struct bt_revision {
|
|
struct {
|
|
u_char opcode;
|
|
} cmd;
|
|
struct {
|
|
u_char board_type;
|
|
u_char custom_feature;
|
|
char firm_revision;
|
|
u_char firm_version;
|
|
} reply;
|
|
};
|
|
|
|
struct bt_digit {
|
|
struct {
|
|
u_char opcode;
|
|
} cmd;
|
|
struct {
|
|
u_char digit;
|
|
} reply;
|
|
};
|
|
|
|
struct bt_devices {
|
|
struct {
|
|
u_char opcode;
|
|
} cmd;
|
|
struct {
|
|
u_char junk[8];
|
|
} reply;
|
|
};
|
|
|
|
struct bt_setup {
|
|
struct {
|
|
u_char opcode;
|
|
u_char len;
|
|
} cmd;
|
|
struct {
|
|
u_char sync_neg:1;
|
|
u_char parity:1;
|
|
u_char :6;
|
|
u_char speed;
|
|
u_char bus_on;
|
|
u_char bus_off;
|
|
u_char num_mbx;
|
|
u_char mbx[3]; /*XXX */
|
|
/* doesn't make sense with 32bit addresses */
|
|
struct {
|
|
u_char offset:4;
|
|
u_char period:3;
|
|
u_char valid:1;
|
|
} sync[8];
|
|
u_char disc_sts;
|
|
} reply;
|
|
};
|
|
|
|
struct bt_period {
|
|
struct {
|
|
u_char opcode;
|
|
u_char len;
|
|
} cmd;
|
|
struct {
|
|
u_char period[8];
|
|
} reply;
|
|
};
|
|
|
|
#define INT9 0x01
|
|
#define INT10 0x02
|
|
#define INT11 0x04
|
|
#define INT12 0x08
|
|
#define INT14 0x20
|
|
#define INT15 0x40
|
|
|
|
#define EISADMA 0x00
|
|
#define CHAN0 0x01
|
|
#define CHAN5 0x20
|
|
#define CHAN6 0x40
|
|
#define CHAN7 0x80
|