218 lines
7.5 KiB
Plaintext
218 lines
7.5 KiB
Plaintext
# $NetBSD: SMDK2800,v 1.1 2002/11/20 18:06:25 bsh Exp $
|
|
#
|
|
# SMDK2800 -- Samsung's S3C2800 evaluation board.
|
|
#
|
|
|
|
include "arch/evbarm/conf/std.smdk2800"
|
|
|
|
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
# Enable the hooks used for initializing the root memory-disk.
|
|
options MEMORY_DISK_HOOKS
|
|
options MEMORY_DISK_DYNAMIC
|
|
options MEMORY_DISK_IS_ROOT # force root on memory disk
|
|
options MEMORY_DISK_SERVER=0 # no userspace memory disk support
|
|
#options MEMORY_DISK_ROOT_SIZE=4096 # size of memory disk, in blocks
|
|
#options MEMORY_DISK_ROOT_SIZE=2880 # 1.44M, same as a floppy
|
|
|
|
# estimated number of users
|
|
|
|
maxusers 32
|
|
|
|
# Standard system options
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
options NTP # NTP phase/frequency locked loop
|
|
|
|
# CPU options
|
|
|
|
options CPU_ARM9 # Support the ARM9TDMI core
|
|
makeoptions COPTS="-O2 -march=armv4"
|
|
|
|
# Architecture options
|
|
|
|
# File systems
|
|
|
|
file-system FFS # UFS
|
|
#file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NFS # Network file system
|
|
#file-system ADOSFS # AmigaDOS-compatible file system
|
|
#file-system EXT2FS # second extended file system (linux)
|
|
#file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
#file-system MSDOSFS # MS-DOS file system
|
|
#file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
#file-system NULLFS # loopback file system
|
|
#file-system PORTAL # portal filesystem (still experimental)
|
|
file-system PROCFS # /proc
|
|
#file-system UMAPFS # NULLFS + uid and gid remapping
|
|
#file-system UNION # union file system
|
|
|
|
# File system options
|
|
#options QUOTA # UFS quotas
|
|
#options FFS_EI # FFS Endian Independant support
|
|
#options NFSSERVER
|
|
options SOFTDEP
|
|
|
|
# Networking options
|
|
|
|
#options GATEWAY # packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # IP multicast routing
|
|
#options NS # XNS
|
|
#options NSIP # XNS tunneling over IP
|
|
#options ISO,TPIP # OSI
|
|
#options EON # OSI tunneling over IP
|
|
#options CCITT,LLC,HDLC # X.25
|
|
#options NETATALK # AppleTalk networking
|
|
#options PFIL_HOOKS # pfil(9) packet filter hooks
|
|
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
#options PPP_DEFLATE # Deflate compression support for PPP
|
|
#options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
options NFS_BOOT_BOOTP
|
|
options NFS_BOOT_DHCP
|
|
options NFS_BOOT_BOOTPARAM
|
|
|
|
# Compatibility options
|
|
|
|
#options COMPAT_43 # 4.3BSD compatibility.
|
|
#options COMPAT_15 # NetBSD 1.5 compatibility.
|
|
#options COMPAT_14 # NetBSD 1.4 compatibility.
|
|
#options COMPAT_13 # NetBSD 1.3 compatibility.
|
|
#options COMPAT_12 # NetBSD 1.2 compatibility.
|
|
#options COMPAT_11 # NetBSD 1.1 compatibility.
|
|
#options COMPAT_10 # NetBSD 1.0 compatibility.
|
|
#options COMPAT_09 # NetBSD 0.9 compatibility.
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
|
|
# Shared memory options
|
|
|
|
#options SYSVMSG # System V-like message queues
|
|
#options SYSVSEM # System V-like semaphores
|
|
#options SEMMNI=10 # number of semaphore identifiers
|
|
#options SEMMNS=60 # number of semaphores in system
|
|
#options SEMUME=10 # max number of undo entries per process
|
|
#options SEMMNU=30 # number of undo structures in system
|
|
#options SYSVSHM # System V-like memory sharing
|
|
#options SHMMAXPGS=1024 # 1024 pages is the default
|
|
|
|
# Miscellaneous kernel options
|
|
options KTRACE # system call tracing, a la ktrace(1)
|
|
#XXX: options IRQSTATS # manage IRQ statistics
|
|
#options LKM # loadable kernel modules
|
|
#options KMEMSTATS # kernel memory statistics
|
|
options SCSIVERBOSE # Verbose SCSI errors
|
|
options PCIVERBOSE # Verbose PCI descriptions
|
|
options MIIVERBOSE # Verbose MII autoconfuration messages
|
|
options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
|
options PCI_NETBSD_CONFIGURE # Do not rely on BIOS/whatever to
|
|
# configure PCI devices
|
|
#options PCI_CONFIGURE_VERBOSE # Show PCI config information
|
|
#options PCI_DEBUG
|
|
options DDB_KEYCODE=0x1d # Enter ddb on ^]
|
|
options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
|
|
# Development and Debugging options
|
|
|
|
#options ARM700BUGTRACK # track the ARM700 swi bug
|
|
#options PORTMASTER # Enable PortMaster only options
|
|
options DIAGNOSTIC # internal consistency checks
|
|
#options PMAP_DEBUG # Enable pmap_debug_level code
|
|
#options VERBOSE_INIT_ARM # verbose bootstraping messages
|
|
#options IPKDB # remote kernel debugging
|
|
#options KGDB
|
|
#options DEBUG_KGDB
|
|
#options DDB # in-kernel debugger
|
|
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
|
|
makeoptions DEBUG="-g" # compile full symbol table
|
|
config netbsd root on ? type ?
|
|
|
|
# The main bus device
|
|
mainbus0 at root
|
|
|
|
# The boot cpu
|
|
cpu0 at mainbus?
|
|
|
|
# Core logic on Samsung S3C2800
|
|
ssio0 at mainbus?
|
|
|
|
# integrated UART
|
|
sscom0 at ssio? index 0
|
|
sscom1 at ssio? index 1
|
|
options SSCOM0CONSOLE
|
|
#options SSCOM1CONSOLE
|
|
options KGDB_DEVNAME="\"sscom1\"" # sscom0 or sscom1
|
|
options KGDB_DEVRATE=57600
|
|
|
|
# PCI bus via internal PCI controller
|
|
sspci0 at ssio? # PCI bus
|
|
pci0 at sspci0
|
|
|
|
# PCI IDE Controllers and Devices
|
|
# PCI IDE controllers - see pciide(4) for supported hardware.
|
|
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
|
|
# how to set up DMA modes for this chip. This may work, or may cause
|
|
# a machine hang with some controllers.
|
|
#pciide* at pci? dev ? function ? flags 0x0000
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
#wd* at pciide? channel ? drive ? flags 0x0000 # the drives themselves
|
|
|
|
# PCI SCSI Controllers and Buses
|
|
#ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI Controllers
|
|
#scsibus* at ahc?
|
|
|
|
# SCSI devices
|
|
|
|
#sd* at scsibus? target ? lun ? # SCSI disk drives
|
|
#st* at scsibus? target ? lun ? # SCSI tape drives
|
|
#cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
|
|
#ch* at scsibus? target ? lun ? # SCSI auto-changers drives
|
|
#uk* at scsibus? target ? lun ? # SCSI unknown drives
|
|
#ss* at scsibus? target ? lun ? # SCSI scanner
|
|
|
|
# PCI network interfaces
|
|
#fxp* at pci? dev ? function ? # I82557/I82558 ethernet cards
|
|
#ne* at pci? dev ? function ? # NE2000 compat ethernet
|
|
#tlp* at pci? dev ? function ? # DECchip 21x4x and clones
|
|
sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
|
|
|
|
# MII/PHY support
|
|
#inphy* at mii? phy ? # Intel 82555 PHYs
|
|
#lxtphy* at mii? phy ? # Level One LXT-970 PHYs
|
|
ukphy* at mii? phy ? # generic unknown PHYs
|
|
|
|
# Pseudo-Devices
|
|
|
|
# disk/mass storage pseudo-devices
|
|
pseudo-device md 1 # memory disk device (ramdisk)
|
|
#pseudo-device vnd 4 # disk-like interface to files
|
|
|
|
# network pseudo-devices
|
|
#pseudo-device bpfilter 4 # Berkeley packet filter
|
|
#pseudo-device bridge # simple inter-network bridging
|
|
pseudo-device loop # network loopback
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty # pseudo-terminals
|
|
pseudo-device rnd # /dev/random and in-kernel generator
|
|
pseudo-device clockctl # user control of clock subsystem
|