NetBSD/sys/dev/sbus/sio16.c

317 lines
8.5 KiB
C

/* $NetBSD: sio16.c,v 1.15 2005/12/11 12:23:44 christos Exp $ */
/*
* Copyright (c) 1998, 2001 Matthew R. Green
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* aurora technologies nova16 driver. this board is an sbus card with
* an external 16 port serial box. there are two cirrus logic cd180
* 8 port serial chips used in the implementation.
*
* thanks go to Oliver Aldulea <oli@morcov.bv.ro> for writing the
* linux driver of this that helped clear up a couple of issues.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: sio16.c,v 1.15 2005/12/11 12:23:44 christos Exp $");
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <machine/autoconf.h>
#include <dev/ic/cd18xxvar.h>
#include <dev/ic/cd18xxreg.h>
#include "ioconf.h"
#include "locators.h"
/* 1600se configuration register bits */
#define SIO16_CONFIGREG_ENABLE_IO 8
#define SIO16_CONFIGREG_ENABLE_IRQ 4
/* 1600se interrupt ackknowledge register bytes */
#define SIO16_MINT_ACK 1 /* modem interrupt acknowledge */
#define SIO16_TINT_ACK 2 /* tx interrupt acknowledge */
#define SIO16_RINT_ACK 3 /* rx interrupt acknowledge */
/*
* device cfattach and cfdriver definitions, plus the routine we pass
* to the cd18xx code or interrupt acknowledgement.
*/
static int sio16_match(struct device *, struct cfdata *, void *);
static void sio16_attach(struct device *, struct device *, void *);
static u_char sio16_ackfunc(void *, int who);
/*
* define the sio16 per-device softc.
*/
struct sio16_softc {
struct device sc_dev; /* must be first */
struct sbusdev sc_sd; /* for sbus drivers */
/* sbus information */
bus_space_tag_t sc_tag; /* bus tag for below */
bus_space_handle_t sc_configreg; /* configuration register */
bus_space_handle_t sc_reg[2]; /* cd180 register sets */
bus_space_handle_t sc_ack; /* interrupt acknowledgement */
#define SIO16_1600SE 0x00000001
u_int sc_clk;
/* cd180 information */
int sc_ncd180;
};
CFATTACH_DECL(siosixteen, sizeof(struct sio16_softc),
sio16_match, sio16_attach, NULL, NULL);
struct sio16_attach_args {
bus_space_tag_t cd_tag;
bus_space_handle_t cd_handle;
u_char (*cd_ackfunc)(void *, int);
void *cd_ackfunc_arg;
u_int cd_osc;
};
/*
* device match routine: is there an sio16 present?
*
* note that we can not put "sio16" in the cfdriver, as this is an
* illegal name, so we have to hard code it here.
*/
#define SIO16_ROM_NAME "sio16"
int
sio16_match(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
struct sbus_attach_args *sa = aux;
/* does the prom think i'm an sio16? */
if (strcmp(SIO16_ROM_NAME, sa->sa_name) != 0)
return (0);
return (1);
}
/*
* device attach routine: go attach all sub devices.
*/
void
sio16_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct sbus_attach_args *sa = aux;
struct sio16_softc *sc = (struct sio16_softc *)self;
bus_space_handle_t h;
char *mode, *model;
int i;
if (sa->sa_nreg != 4)
panic("sio16_attach: got %d registers intead of 4",
sa->sa_nreg);
/* copy our bus tag, we will need it */
sc->sc_tag = sa->sa_bustag;
/*
* sio16 has 4 register mappings. a single byte configuration
* register, 2 128 byte regions for the cd180 registers, and
* a 4 byte region for interrupt acknowledgement.
*/
if (sbus_bus_map(sa->sa_bustag,
sa->sa_reg[0].oa_space,
sa->sa_reg[0].oa_base,
sa->sa_reg[0].oa_size,
0, &h) != 0) {
printf("%s at sbus: can not map registers 0\n",
self->dv_xname);
return;
}
sc->sc_configreg = h;
if (sbus_bus_map(sa->sa_bustag,
sa->sa_reg[1].sbr_slot,
sa->sa_reg[1].sbr_offset,
sa->sa_reg[1].sbr_size,
0, &h) != 0) {
printf("%s at sbus: can not map registers 1\n",
self->dv_xname);
return;
}
sc->sc_reg[0] = h;
if (sbus_bus_map(sa->sa_bustag,
sa->sa_reg[2].sbr_slot,
sa->sa_reg[2].sbr_offset,
sa->sa_reg[2].sbr_size,
0, &h) != 0) {
printf("%s at sbus: can not map registers 2\n",
self->dv_xname);
return;
}
sc->sc_reg[1] = h;
if (sbus_bus_map(sa->sa_bustag,
sa->sa_reg[3].sbr_slot,
sa->sa_reg[3].sbr_offset,
sa->sa_reg[3].sbr_size,
0, &h) != 0) {
printf("%s at sbus: can not map registers 3\n",
self->dv_xname);
return;
}
sc->sc_ack = h;
mode = prom_getpropstring(sa->sa_node, "mode");
if (mode)
printf(", %s mode", mode);
/* get the clock frequency */
sc->sc_clk = prom_getpropint(sa->sa_node, "clk", 24000);
model = prom_getpropstring(sa->sa_node, "model");
if (model == 0) {
printf(", no model property, bailing\n");
return;
}
/* are we an 1600se? */
if (strcmp(model, "1600se") == 0) {
printf(", 16 channels");
sc->sc_ncd180 = 2;
} else {
printf(", don't know model %s, bailing\n", model);
return;
}
/* set up our sbus connections */
sbus_establish(&sc->sc_sd, &sc->sc_dev);
/* establish interrupt channel */
(void)bus_intr_establish(sa->sa_bustag, sa->sa_pri, IPL_TTY,
cd18xx_hardintr, sc);
/* reset the board, and turn on interrupts and I/O */
bus_space_write_1(sa->sa_bustag, sc->sc_configreg, 0, 0);
delay(100);
bus_space_write_1(sa->sa_bustag, sc->sc_configreg, 0,
SIO16_CONFIGREG_ENABLE_IO | SIO16_CONFIGREG_ENABLE_IRQ |
(((sa->sa_pri) & 0x0f) >> 2));
delay(10000);
printf("\n");
/* finally, configure the clcd's underneath */
for (i = 0; i < sc->sc_ncd180; i++) {
struct sio16_attach_args cd;
cd.cd_tag = sa->sa_bustag;
cd.cd_osc = sc->sc_clk * 100;
cd.cd_handle = (bus_space_handle_t)sc->sc_reg[i];
cd.cd_ackfunc = sio16_ackfunc;
cd.cd_ackfunc_arg = sc;
(void)config_found(self, (void *)&cd, NULL);
}
}
/*
* note that the addresses used in this function match those assigned
* in clcd_attach() below, or the various service match routines.
*/
u_char
sio16_ackfunc(v, who)
void *v;
int who;
{
struct sio16_softc *sc = v;
bus_size_t addr;
switch (who) {
case CD18xx_INTRACK_RxINT:
case CD18xx_INTRACK_REINT:
addr = SIO16_RINT_ACK;
break;
case CD18xx_INTRACK_TxINT:
addr = SIO16_TINT_ACK;
break;
case CD18xx_INTRACK_MxINT:
addr = SIO16_MINT_ACK;
break;
default:
panic("%s: sio16_ackfunc: unknown ackfunc %d",
sc->sc_dev.dv_xname, who);
}
return (bus_space_read_1(sc->sc_tag, sc->sc_ack, addr));
}
/*
* we attach two `clcd' instances per 1600se, that each call the
* backend cd18xx driver for help.
*/
static int clcd_match(struct device *, struct cfdata *, void *);
static void clcd_attach(struct device *, struct device *, void *);
CFATTACH_DECL(clcd, sizeof(struct cd18xx_softc),
clcd_match, clcd_attach, NULL, NULL);
static int
clcd_match(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
/* XXX */
return 1;
}
static void
clcd_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct cd18xx_softc *sc = (struct cd18xx_softc *)self;
struct sio16_attach_args *args = aux;
sc->sc_tag = args->cd_tag;
sc->sc_handle = args->cd_handle;
sc->sc_osc = args->cd_osc;
sc->sc_ackfunc = args->cd_ackfunc;
sc->sc_ackfunc_arg = args->cd_ackfunc_arg;
sc->sc_msmr = SIO16_MINT_ACK;
sc->sc_tsmr = SIO16_TINT_ACK;
sc->sc_rsmr = SIO16_RINT_ACK;
/* call the common code */
cd18xx_attach(sc);
}