NetBSD/sys/dev/i2c/adm1030.c

335 lines
9.6 KiB
C

/* $NetBSD: adm1030.c,v 1.7 2007/01/05 23:09:33 jmcneill Exp $ */
/*-
* Copyright (C) 2005 Michael Lorenz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* a driver fot the ADM1030 environmental controller found in some iBook G3
* and probably other Apple machines
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: adm1030.c,v 1.7 2007/01/05 23:09:33 jmcneill Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/sysctl.h>
#include <uvm/uvm_extern.h>
#include <dev/i2c/i2cvar.h>
#include <dev/sysmon/sysmonvar.h>
#include "sysmon_envsys.h"
#include <dev/i2c/adm1030var.h>
static void adm1030c_attach(struct device *, struct device *, void *);
static int adm1030c_match(struct device *, struct cfdata *, void *);
struct adm1030c_sysmon {
struct sysmon_envsys sme;
struct adm1030c_softc *sc;
struct envsys_tre_data adm1030c_info[];
};
static uint8_t adm1030c_readreg(struct adm1030c_softc *, uint8_t);
static void adm1030c_writereg(struct adm1030c_softc *, uint8_t, uint8_t);
static int adm1030c_temp2muk(uint8_t);
static int adm1030c_reg2rpm(uint8_t);
static int adm1030c_gtredata(struct sysmon_envsys *, struct envsys_tre_data *);
static int adm1030c_streinfo(struct sysmon_envsys *, struct envsys_basic_info *);
CFATTACH_DECL(adm1030c, sizeof(struct adm1030c_softc),
adm1030c_match, adm1030c_attach, NULL, NULL);
static int
adm1030c_match(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
/* no probing when we're attaching to iic */
return 1;
}
static void
adm1030c_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct adm1030c_softc *sc = device_private(self);
struct i2c_attach_args *args = aux;
sc->parent = parent;
sc->address = args->ia_addr;
printf(" ADM1030 thermal monitor and fan controller\n");
sc->sc_i2c = (struct i2c_controller *)args->ia_tag;
adm1030c_setup(sc);
}
static uint8_t
adm1030c_readreg(struct adm1030c_softc *sc, uint8_t reg)
{
uint8_t data = 0;
iic_acquire_bus(sc->sc_i2c,0);
iic_exec(sc->sc_i2c, I2C_OP_READ, sc->address, &reg, 1,
&data, 1, 0);
iic_release_bus(sc->sc_i2c, 0);
return data;
}
static void
adm1030c_writereg(struct adm1030c_softc *sc, uint8_t reg, uint8_t data)
{
uint8_t mdata[2]={reg, data};
iic_acquire_bus(sc->sc_i2c, 0);
iic_exec(sc->sc_i2c, I2C_OP_WRITE, sc->address, &mdata, 2, NULL, 0, 0);
iic_release_bus(sc->sc_i2c, 0);
}
#if NSYSMON_ENVSYS > 0
struct envsys_range *adm1030c_ranges;
struct envsys_basic_info *adm1030c_info;
/* convert temperature read from the chip to micro kelvin */
static inline int
adm1030c_temp2muk(uint8_t t)
{
int temp=t;
return temp * 1000000 + 273150000U;
}
static inline int
adm1030c_reg2rpm(uint8_t r)
{
if (r == 0xff)
return 0;
return (11250 * 60) / (2 * (int)r);
}
SYSCTL_SETUP(sysctl_adm1030c_setup, "sysctl ADM1030M subtree setup")
{
#ifdef ADM1030_DEBUG
printf("node setup\n");
#endif
sysctl_createv(NULL, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "machdep", NULL,
NULL, 0, NULL, 0,
CTL_MACHDEP, CTL_EOL);
}
static int
sysctl_adm1030c_temp(SYSCTLFN_ARGS)
{
struct sysctlnode node = *rnode;
struct adm1030c_softc *sc=(struct adm1030c_softc *)node.sysctl_data;
int reg = 12345, nd=0;
const int *np = newp;
uint8_t chipreg = (uint8_t)(node.sysctl_idata & 0xff);
reg = (uint32_t)adm1030c_readreg(sc, chipreg);
reg = (reg & 0xf8) >> 1;
node.sysctl_idata = reg;
if (np) {
/* we're asked to write */
nd = *np;
node.sysctl_data = &reg;
if (sysctl_lookup(SYSCTLFN_CALL(&node)) == 0) {
int8_t new_reg;
new_reg = (int8_t)(max(30, min(85, node.sysctl_idata)));
new_reg = ((new_reg & 0x7c) << 1); /* 5C range */
adm1030c_writereg(sc, chipreg, new_reg);
return 0;
}
return EINVAL;
} else {
node.sysctl_size = 4;
return (sysctl_lookup(SYSCTLFN_CALL(&node)));
}
}
void
adm1030c_setup(struct adm1030c_softc *sc)
{
struct adm1030c_sysmon *datap;
int error;
struct envsys_range *cur_r;
struct envsys_basic_info *cur_i;
struct envsys_tre_data *cur_t;
int ret;
struct sysctlnode *me = NULL, *node = NULL;
datap = malloc(sizeof(struct sysmon_envsys) + 3 *
sizeof(struct envsys_tre_data) + sizeof(void *),
M_DEVBUF, M_WAITOK | M_ZERO);
adm1030c_ranges = malloc (sizeof(struct envsys_range) * 3,
M_DEVBUF, M_WAITOK | M_ZERO);
adm1030c_info = malloc (sizeof(struct envsys_basic_info) * 3,
M_DEVBUF, M_WAITOK | M_ZERO);
ret=sysctl_createv(NULL, 0, NULL, (const struct sysctlnode **)&me,
CTLFLAG_READWRITE,
CTLTYPE_NODE, sc->sc_dev.dv_xname, NULL,
NULL, 0, NULL, 0,
CTL_MACHDEP, CTL_CREATE, CTL_EOL);
cur_r = &adm1030c_ranges[0];
cur_i = &adm1030c_info[0];
cur_t = &datap->adm1030c_info[0];
strcpy(cur_i->desc, "case temperature");
cur_i->units = ENVSYS_STEMP;
cur_i->sensor = 0;
sc->regs[0] = 0x0a; /* remote temperature register */
cur_r->low = adm1030c_temp2muk(-127);
cur_r->high = adm1030c_temp2muk(127);
cur_r->units = ENVSYS_STEMP;
ret=sysctl_createv(NULL, 0, NULL, (const struct sysctlnode **)&node,
CTLFLAG_READWRITE | CTLFLAG_OWNDESC | CTLFLAG_IMMEDIATE,
CTLTYPE_INT, "temp0", cur_i->desc,
sysctl_adm1030c_temp, 0x25, NULL, 0,
CTL_MACHDEP, me->sysctl_num, CTL_CREATE, CTL_EOL);
if (node != NULL) {
node->sysctl_data = sc;
}
cur_i->validflags = ENVSYS_FVALID | ENVSYS_FCURVALID;
cur_t->sensor = 0;
cur_t->warnflags = ENVSYS_WARN_OK;
cur_t->validflags = ENVSYS_FVALID | ENVSYS_FCURVALID;
cur_t->units = cur_i->units;
cur_r = &adm1030c_ranges[1];
cur_i = &adm1030c_info[1];
cur_t = &datap->adm1030c_info[1];
strcpy(cur_i->desc, "CPU temperature");
cur_i->units = ENVSYS_STEMP;
cur_i->sensor = 1;
sc->regs[1] = 0x0b; /* built-in temperature register */
cur_r->low = adm1030c_temp2muk(-127);
cur_r->high = adm1030c_temp2muk(127);
cur_r->units = ENVSYS_STEMP;
ret=sysctl_createv(NULL, 0, NULL, (const struct sysctlnode **)&node,
CTLFLAG_READWRITE | CTLFLAG_OWNDESC | CTLFLAG_IMMEDIATE,
CTLTYPE_INT, "temp1", cur_i->desc,
sysctl_adm1030c_temp,0x24, NULL, 0,
CTL_MACHDEP, me->sysctl_num, CTL_CREATE, CTL_EOL);
if(node!=NULL) {
node->sysctl_data = sc;
}
cur_i->validflags = ENVSYS_FVALID|ENVSYS_FCURVALID;
cur_t->sensor = 1;
cur_t->warnflags = ENVSYS_WARN_OK;
cur_t->validflags = ENVSYS_FVALID|ENVSYS_FCURVALID;
cur_t->units = cur_i->units;
cur_r = &adm1030c_ranges[2];
cur_i = &adm1030c_info[2];
cur_t = &datap->adm1030c_info[2];
strcpy(cur_i->desc, "fan speed");
cur_i->units = ENVSYS_SFANRPM;
cur_i->sensor = 2;
sc->regs[2] = 0x08; /* fan rpm */
cur_r->low = 0;
cur_r->high = adm1030c_reg2rpm(0xfe);
cur_r->units = ENVSYS_SFANRPM;
cur_i->validflags = ENVSYS_FVALID | ENVSYS_FCURVALID;
cur_t->sensor = 2;
cur_t->warnflags = ENVSYS_WARN_OK;
cur_t->validflags = ENVSYS_FVALID|ENVSYS_FCURVALID;
cur_t->units = cur_i->units;
sc->sc_sysmon_cookie = &datap->sme;
datap->sme.sme_nsensors = 3;
datap->sme.sme_envsys_version = 1000;
datap->sme.sme_ranges = adm1030c_ranges;
datap->sme.sme_sensor_info = adm1030c_info;
datap->sme.sme_sensor_data = datap->adm1030c_info;
datap->sme.sme_cookie = sc;
datap->sme.sme_gtredata = adm1030c_gtredata;
datap->sme.sme_streinfo = adm1030c_streinfo;
datap->sme.sme_flags = 0;
if ((error = sysmon_envsys_register(&datap->sme)) != 0)
aprint_error("%s: unable to register with sysmon (%d)\n",
sc->sc_dev.dv_xname, error);
}
static int
adm1030c_gtredata(struct sysmon_envsys *sme, struct envsys_tre_data *tred)
{
struct adm1030c_softc *sc = sme->sme_cookie;
struct envsys_tre_data *cur_tre;
struct envsys_basic_info *cur_i;
int i;
uint8_t reg;
i = tred->sensor;
cur_tre = &sme->sme_sensor_data[i];
cur_i = &sme->sme_sensor_info[i];
reg = sc->regs[i];
switch (cur_tre->units)
{
case ENVSYS_STEMP:
cur_tre->cur.data_s =
adm1030c_temp2muk(adm1030c_readreg(sc, reg));
break;
case ENVSYS_SFANRPM:
{
uint8_t blah = adm1030c_readreg(sc,reg);
cur_tre->cur.data_us = adm1030c_reg2rpm(blah);
}
break;
}
cur_tre->validflags |= ENVSYS_FCURVALID | ENVSYS_FVALID;
*tred = sme->sme_sensor_data[i];
return 0;
}
static int
adm1030c_streinfo(struct sysmon_envsys *sme, struct envsys_basic_info *binfo)
{
/* There is nothing to set here. */
return (EINVAL);
}
#endif /* NSYSMON_ENVSYS > 0 */