a186c80055
synthesizer/transceiver/power amplifier. The ADMtek ADM8211C is sometimes paired with this chip. This the first step toward supporting the ADMtek ADM8211C-based products.
181 lines
6.8 KiB
C
181 lines
6.8 KiB
C
/* $NetBSD: al2210reg.h,v 1.1 2004/07/21 04:27:16 dyoung Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2004 David Young. All rights reserved.
|
|
*
|
|
* This code was written by David Young.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY David Young ``AS IS'' AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
|
|
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL David
|
|
* Young BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
|
|
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
* OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _DEV_IC_AL2210REG_H_
|
|
#define _DEV_IC_AL2210REG_H_
|
|
|
|
/*
|
|
* Register definitions for the Airoha AL2210 2.4GHz 802.11b
|
|
* transceiver.
|
|
*/
|
|
|
|
/* NOTE WELL: These register definitions, in spite of being derived
|
|
* from an "official" Airoha AL2210 datasheet, contain a lot of
|
|
* "magic." Comparing with the magic in this header file with a
|
|
* reference driver that also contains AL2210 magic, the magic does
|
|
* not match!
|
|
*/
|
|
|
|
/*
|
|
* Serial bus format for Airoha AL2210 2.4GHz transceiver.
|
|
*/
|
|
#define AL2210_TWI_DATA_MASK BITS(23, 4)
|
|
#define AL2210_TWI_ADDR_MASK BITS(3, 0)
|
|
|
|
/*
|
|
* Registers for Airoha AL2210.
|
|
*/
|
|
|
|
/* The synthesizer magic should be decipherable, but I'm not going
|
|
* to waste my time right now.
|
|
*/
|
|
#define AL2210_CHANNEL 0x0
|
|
#define AL2210_CHANNEL_B_MASK BITS(10, 5) /* Counter B */
|
|
#define AL2210_CHANNEL_B_2412MHZ 0x396
|
|
#define AL2210_CHANNEL_B_2417MHZ 0x396
|
|
#define AL2210_CHANNEL_B_2422MHZ 0x396
|
|
#define AL2210_CHANNEL_B_2427MHZ 0x396
|
|
#define AL2210_CHANNEL_B_2432MHZ 0x398
|
|
#define AL2210_CHANNEL_B_2437MHZ 0x398
|
|
#define AL2210_CHANNEL_B_2442MHZ 0x398
|
|
#define AL2210_CHANNEL_B_2447MHZ 0x398
|
|
#define AL2210_CHANNEL_B_2452MHZ 0x398
|
|
#define AL2210_CHANNEL_B_2457MHZ 0x398
|
|
#define AL2210_CHANNEL_B_2462MHZ 0x398
|
|
#define AL2210_CHANNEL_B_2467MHZ 0x39a
|
|
#define AL2210_CHANNEL_B_2472MHZ 0x39a
|
|
#define AL2210_CHANNEL_B_2484MHZ 0x39b
|
|
#define AL2210_CHANNEL_A_MASK BITS(4, 0) /* Counter A */
|
|
#define AL2210_CHANNEL_A_2412MHZ 0x0c
|
|
#define AL2210_CHANNEL_A_2417MHZ 0x11
|
|
#define AL2210_CHANNEL_A_2422MHZ 0x16
|
|
#define AL2210_CHANNEL_A_2427MHZ 0x1b
|
|
#define AL2210_CHANNEL_A_2432MHZ 0x00
|
|
#define AL2210_CHANNEL_A_2437MHZ 0x05
|
|
#define AL2210_CHANNEL_A_2442MHZ 0x0a
|
|
#define AL2210_CHANNEL_A_2447MHZ 0x0f
|
|
#define AL2210_CHANNEL_A_2452MHZ 0x14
|
|
#define AL2210_CHANNEL_A_2457MHZ 0x10
|
|
#define AL2210_CHANNEL_A_2462MHZ 0x1e
|
|
#define AL2210_CHANNEL_A_2467MHZ 0x03
|
|
#define AL2210_CHANNEL_A_2472MHZ 0x08
|
|
#define AL2210_CHANNEL_A_2484MHZ 0x14
|
|
|
|
#define AL2210_SYNTHESIZER 0x1
|
|
#define AL2210_SYNTHESIZER_R_MASK BITS(4, 0) /* Reference
|
|
* divider
|
|
#define AL2210_RECEIVER 0x2
|
|
/* Rx VAGC Detector Negative Edge Threshold */
|
|
#define AL2210_RECEIVER_AGCDET_P_MASK BITS(16, 15)
|
|
#define AL2210_RECEIVER_AGCDET_P_0_4V 0 /* 0.4V */
|
|
#define AL2210_RECEIVER_AGCDET_P_0_3V 1 /* 0.3V */
|
|
#define AL2210_RECEIVER_AGCDET_P_0_2V 2 /* 0.2V */
|
|
#define AL2210_RECEIVER_AGCDET_P_RSVD 3 /* reserved */
|
|
/* Rx VAGC Detector Negative Edge Threshold */
|
|
#define AL2210_RECEIVER_AGCDET_N_MASK BITS(14, 13)
|
|
#define AL2210_RECEIVER_AGCDET_N_0_4V 0 /* 0.4V */
|
|
#define AL2210_RECEIVER_AGCDET_N_0_3V 1 /* 0.3V */
|
|
#define AL2210_RECEIVER_AGCDET_N_0_2V 2 /* 0.2V */
|
|
#define AL2210_RECEIVER_AGCDET_N_RSVD 3 /* reserved */
|
|
/* AGC detector control, 1: enable, 0: disable. */
|
|
#define AL2210_RECEIVER_AGCDETENA BIT(11)
|
|
/* Rx filter bandwidth select */
|
|
#define AL2210_RECEIVER_BW_SEL_MASK BITS(4, 2)
|
|
#define AL2210_RECEIVER_BW_SEL_9_5MHZ 0
|
|
#define AL2210_RECEIVER_BW_SEL_9MHZ 1
|
|
#define AL2210_RECEIVER_BW_SEL_8_5MHZ 2
|
|
#define AL2210_RECEIVER_BW_SEL_8MHZ 3
|
|
#define AL2210_RECEIVER_BW_SEL_7_5MHZ 4
|
|
#define AL2210_RECEIVER_BW_SEL_7MHZ 5
|
|
#define AL2210_RECEIVER_BW_SEL_6_5MHZ 6
|
|
#define AL2210_RECEIVER_BW_SEL_6MHZ 7
|
|
|
|
#define AL2210_TRANSMITTER 0x3
|
|
/* 2nd-stage power amplifier current control. Units of 20uA.
|
|
* "Full scale" current is 300uA. (Is full-scale at PABIAS2 = 0 or
|
|
* at PABIAS2 = 15?)
|
|
*/
|
|
#define AL2210_TRANSMITTER_PABIAS2_MASK BITS(7, 4)
|
|
/* 1st-stage power amplifier current control. Units of 20uA.
|
|
* "Full scale" current is 300uA. (Is full-scale at PABIAS2 = 0 or
|
|
* at PABIAS2 = 15?)
|
|
*/
|
|
#define AL2210_TRANSMITTER_PABIAS1_MASK BITS(3, 0)
|
|
|
|
#define AL2210_CONFIG1 0x4
|
|
|
|
#define AL2210_CONFIG2 0x5
|
|
/* Regulator power. 0: on, 1: off. */
|
|
#define AL2210_CONFIG2_REGPD_MASK BIT(19)
|
|
/* XO clock setting. 0: 44MHz, 1: 22MHz. */
|
|
#define AL2210_CONFIG2_XTAL_SC_MASK BIT(10)
|
|
|
|
/* DC Offset Calibration (DCOC) */
|
|
#define AL2210_CONFIG3 0x6
|
|
/* Select 1MHz DCOC timing. */
|
|
#define AL2210_CONFIG3_AGC_DET_PATT_1MHZ BIT(17)
|
|
/* Select 100kHz DCOC timing. */
|
|
#define AL2210_CONFIG3_AGC_DET_PATT_100KHZ BIT(16)
|
|
#define AL2210_CONFIG3_LNA_GAIN_PATT_1MHZ BITS(15)
|
|
#define AL2210_CONFIG3_LNA_GAIN_PATT_100KHZ BITS(14)
|
|
#define AL2210_CONFIG3_RXON_PATT_1MHZ BITS(13)
|
|
#define AL2210_CONFIG3_RXON_PATT_1OOKHZ BITS(12)
|
|
/* 1MHz DCOC duration? Microseconds. */
|
|
#define AL2210_CONFIG3_CNT_1M_AGC_MASK BITS(11, 8)
|
|
#define AL2210_CONFIG3_CNT_1M_LNA_MASK BITS(7, 4)
|
|
#define AL2210_CONFIG3_CNT_1M_RXON_MASK BITS(3, 0)
|
|
|
|
#define AL2210_CONFIG4 0x7
|
|
/* 100kHz DCOC duration? Microseconds. */
|
|
#define AL2210_CONFIG4_CNT_100K_AGC_MASK BITS(11, 8)
|
|
#define AL2210_CONFIG4_CNT_100K_LNA_MASK BITS(7, 4)
|
|
#define AL2210_CONFIG4_CNT_100K_RXON_MASK BITS(3, 0)
|
|
|
|
#define AL2210_CONFIG5 0x8
|
|
#define AL2210_CONFIG5_TXF_BW_MASK BITS(9, 8)
|
|
#define AL2210_CONFIG5_TXF_BW_12MHZ 3
|
|
#define AL2210_CONFIG5_TXF_BW_11MHZ 2
|
|
#define AL2210_CONFIG5_TXF_BW_10MHZ 1
|
|
#define AL2210_CONFIG5_TXF_BW_9MHZ 0
|
|
|
|
#define AL2210_CONFIG6 0x9
|
|
#define AL2210_CONFIG6_DEFAULT 0x2c0009 /* magic */
|
|
|
|
#define AL2210_CONFIG7 0xa
|
|
#define AL2210_CONFIG7_DEFAULT 0x001c0a /* magic */
|
|
|
|
#define AL2210_CONFIG8 0xb
|
|
#define AL2210_CONFIG8_DEFAULT 0x01000b /* magic */
|
|
|
|
#endif /* _DEV_IC_AL2210REG_H_ */
|