45 lines
1.8 KiB
Plaintext
45 lines
1.8 KiB
Plaintext
NetBSD/atari _VER runs on a TT030, Falcon and Hades. An FPU is not required.
|
|
The minimum amount of RAM required is 4Mb. On the Hades, only the et4000-PCI
|
|
card is supported in the _VER release. When another video card is present,
|
|
you can use NetBSD only with a serial console.
|
|
|
|
Here is a table of recommended HD partition sizes for a full install:
|
|
partition: advise, with X, needed, with X
|
|
root (/) 20M 20M 15M 15M
|
|
user (/usr) 95M 125M 75M 105M
|
|
swap ----- 2M for every M ram -----
|
|
local (/local) up to you
|
|
|
|
In addition of the rule of thumb for the swap size mentioned below, you
|
|
probably want to make sure that the size of the swap partition does not
|
|
drop below 20Mb (30Mb for systems with X).
|
|
As you may note the recommended size of /usr is 20M greater than
|
|
needed. This is to leave room for a kernel source and compile tree
|
|
as you will probably want to compile your own kernel. (GENERIC is
|
|
large and bulky to accommodate all people, BOOT is small and might
|
|
not have all the features you want).
|
|
|
|
Supported devices include:
|
|
- The builtin SCSI host adapter
|
|
- Should support most SCSI-drives. The drives that are
|
|
currently tested are:
|
|
MAXTOR 7245S, MAXTOR 7080S, SEAGATE ST157N
|
|
- Should support most tape drives. The drives that are
|
|
currently tested are:
|
|
TANDBERG 3600, TANDBERG 3800
|
|
- Should support most CD-ROM drives.
|
|
- Should support most ZIP/MO drives.
|
|
- The builtin video controller
|
|
- The builtin (720Kb/1.44Mb) floppydrive
|
|
- The serial2/modem2 ports
|
|
- The Falcon FX memory expansion
|
|
- The atari mouse
|
|
- A 3-button mouse
|
|
- The parallel printer
|
|
- Riebl (and possibly PAM) ethernet cards on the VME bus.
|
|
- IDE interface on both Falcon and Hades
|
|
- The serial interface on the first 68901 UART (modem1)
|
|
- ET4000-PCI (VGA) on the Hades.
|
|
|
|
If it's not on this list, there is no support for it in this release.
|