NetBSD/sys/arch/i386/include/apmvar.h
jtk 73b960a308 add pre-probe step so that autoconfiguration does not print 'apm0 at
mainbus0 not configured' message if configured but not present in the
BIOS
1996-11-22 00:19:07 +00:00

253 lines
8.1 KiB
C

/* $NetBSD: apmvar.h,v 1.5 1996/11/22 00:19:09 jtk Exp $ */
/*
* Copyright (c) 1995 John T. Kohl
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR `AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef __I386_APM_H__
#define __I386_APM_H__
/* Advanced Power Management (v1.0 and v1.1 specification)
* functions/defines/etc.
*/
#define APM_BIOS_FNCODE (0x53)
#define APM_SYSTEM_BIOS (0x15)
#define APM_BIOS_FN(x) ((APM_BIOS_FNCODE<<8)|(x))
/*
* APM info bits from BIOS
*/
#define APM_16BIT_SUPPORT 0x01
#define APM_32BIT_SUPPORT 0x02
#define APM_CPUIDLE_SLOW 0x04
#define APM_DISABLED 0x08
#define APM_DISENGAGED 0x10
#define APM_ERR_CODE(regs) (((regs)->ax & 0xff00) >> 8)
#define APM_ERR_PM_DISABLED 0x01
#define APM_ERR_REALALREADY 0x02
#define APM_ERR_NOTCONN 0x03
#define APM_ERR_16ALREADY 0x05
#define APM_ERR_16NOTSUPP 0x06
#define APM_ERR_32ALREADY 0x07
#define APM_ERR_32NOTSUPP 0x08
#define APM_ERR_UNRECOG_DEV 0x09
#define APM_ERR_ERANGE 0x0A
#define APM_ERR_NOTENGAGED 0x0B
#define APM_ERR_UNABLE 0x60
#define APM_ERR_NOEVENTS 0x80
#define APM_ERR_NOT_PRESENT 0x86
#define APM_DEV_APM_BIOS 0x0000
#define APM_DEV_ALLDEVS 0x0001
/* device classes are high byte; device IDs go in low byte */
#define APM_DEV_DISPLAY(x) (0x0100|((x)&0xff))
#define APM_DEV_DISK(x) (0x0200|((x)&0xff))
#define APM_DEV_PARALLEL(x) (0x0300|((x)&0xff))
#define APM_DEV_SERIAL(x) (0x0400|((x)&0xff))
#define APM_DEV_NETWORK(x) (0x0500|((x)&0xff))
#define APM_DEV_PCMCIA(x) (0x0600|((x)&0xff))
#define APM_DEV_ALLUNITS 0xff
#define APM_INSTALLATION_CHECK 0x00 /* int15 only */
#define APM_INSTALL_SIGNATURE 0x504d /* %bh = 'P', %bl = 'M' */
#define APM_REALMODE_CONNECT 0x01 /* int15 only */
#define APM_16BIT_CONNECT 0x02 /* int15 only */
#define APM_32BIT_CONNECT 0x03 /* int15 only */
#define APM_DISCONNECT 0x04 /* %bx = APM_DEV_APM_BIOS */
#define APM_CPU_IDLE 0x05
#define APM_CPU_BUSY 0x06
#define APM_SET_PWR_STATE 0x07
#define APM_SYS_READY 0x0000 /* %cx */
#define APM_SYS_STANDBY 0x0001
#define APM_SYS_SUSPEND 0x0002
#define APM_SYS_OFF 0x0003
#define APM_LASTREQ_INPROG 0x0004
#define APM_LASTREQ_REJECTED 0x0005
/* system standby is device ID (%bx) 0x0001, APM_SYS_STANDBY */
/* system suspend is device ID (%bx) 0x0001, APM_SYS_SUSPEND */
#define APM_PWR_MGT_ENABLE 0x08
#define APM_MGT_ALL 0xffff /* %bx */
#define APM_MGT_DISABLE 0x0 /* %cx */
#define APM_MGT_ENABLE 0x1
#define APM_SYSTEM_DEFAULTS 0x09
#define APM_DEFAULTS_ALL 0xffff /* %bx */
#define APM_POWER_STATUS 0x0a
#define APM_AC_OFF 0x00
#define APM_AC_ON 0x01
#define APM_AC_BACKUP 0x02
#define APM_AC_UNKNOWN 0xff
/* the first set of battery constants is 1.0 style values;
the second set is 1.1 style bit definitions */
#define APM_BATT_HIGH 0x00
#define APM_BATT_LOW 0x01
#define APM_BATT_CRITICAL 0x02
#define APM_BATT_CHARGING 0x03
#define APM_BATT_ABSENT 0x04 /* Software only--not in spec! */
#define APM_BATT_UNKNOWN 0xff
#define APM_BATT_FLAG_HIGH 0x01
#define APM_BATT_FLAG_LOW 0x02
#define APM_BATT_FLAG_CRITICAL 0x04
#define APM_BATT_FLAG_CHARGING 0x08
#define APM_BATT_FLAG_NOBATTERY 0x80
#define APM_BATT_LIFE_UNKNOWN 0xff
#define APM_BATT_STATE(regp) ((regp)->bx & 0xff)
#define APM_BATT_FLAGS(regp) (((regp)->cx & 0xff00) >> 8)
#define APM_AC_STATE(regp) (((regp)->bx & 0xff00) >> 8)
#define APM_BATT_LIFE(regp) ((regp)->cx & 0xff) /* in % */
/* BATT_REMAINING returns minutes remaining */
#define APM_BATT_REMAINING(regp) (((regp)->dx & 0x8000) ? \
((regp)->dx & 0x7fff) : \
((regp)->dx & 0x7fff)/60)
#define APM_BATT_REM_VALID(regp) (((regp)->dx & 0xffff) != 0xffff)
#define APM_GET_PM_EVENT 0x0b
#define APM_STANDBY_REQ 0x0001 /* %bx on return */
#define APM_SUSPEND_REQ 0x0002
#define APM_NORMAL_RESUME 0x0003
#define APM_CRIT_RESUME 0x0004 /* suspend/resume happened
without us */
#define APM_BATTERY_LOW 0x0005
#define APM_POWER_CHANGE 0x0006
#define APM_UPDATE_TIME 0x0007
#define APM_CRIT_SUSPEND_REQ 0x0008
#define APM_USER_STANDBY_REQ 0x0009
#define APM_USER_SUSPEND_REQ 0x000A
#define APM_SYS_STANDBY_RESUME 0x000B
#define APM_GET_POWER_STATE 0x0c
#define APM_DEVICE_MGMT_ENABLE 0x0d
#define APM_DRIVER_VERSION 0x0e
/* %bx should be DEV value (APM_DEV_APM_BIOS)
%ch = driver major vno
%cl = driver minor vno
return: %ah = conn major; %al = conn minor
*/
#define APM_CONN_MINOR(regp) ((regp)->ax & 0xff)
#define APM_CONN_MAJOR(regp) (((regp)->ax & 0xff00) >> 8)
#define APM_PWR_MGT_ENGAGE 0x0F
#define APM_MGT_DISENGAGE 0x0 /* %cx */
#define APM_MGT_ENGAGE 0x1
#define APM_OEM 0x80
/*
* APM info word from the real-mode handler is adjusted to put
* major/minor version in low half and support bits in upper half.
*/
#define APM_MAJOR_VERS(info) (((info)&0xff00)>>8)
#define APM_MINOR_VERS(info) ((info)&0xff)
#define APM_16BIT_SUPPORTED (APM_16BIT_SUPPORT << 16)
#define APM_32BIT_SUPPORTED (APM_32BIT_SUPPORT << 16)
#define APM_IDLE_SLOWS (APM_CPUIDLE_SLOW << 16)
#define APM_BIOS_PM_DISABLED (APM_DISABLED << 16)
#define APM_BIOS_PM_DISENGAGED (APM_DISENGAGED << 16)
/*
* virtual & physical address of the trampoline
* that we use: page 1.
*/
#define APM_BIOSTRAMP NBPG
#ifndef _LOCORE
/* filled in by apmcall */
struct apmregs {
u_short ax;
u_short bx;
u_short cx;
u_short dx;
u_short si;
u_short di;
u_short flags;
};
struct apm_connect_info {
u_int apm_code32_seg_base; /* real-mode style segment selector */
u_int apm_code16_seg_base;
u_int apm_data_seg_base;
u_int apm_entrypt;
u_short apm_segsel; /* segment selector for APM */
u_short _pad1;
u_int apm_code32_seg_len;
u_int apm_data_seg_len;
u_int apm_detail;
};
struct apm_event_info {
u_int type;
u_int index;
u_int spare[8];
};
struct apm_power_info {
u_char battery_state;
u_char ac_state;
u_char battery_life;
u_char spare1;
u_int minutes_left; /* estimate */
u_int spare2[6];
};
struct apm_ctl {
u_int dev;
u_int mode;
};
#define APM_IOC_REJECT _IOW('A', 0, struct apm_event_info) /* reject request # */
#define APM_IOC_STANDBY _IO('A', 1) /* put system into standby */
#define APM_IOC_SUSPEND _IO('A', 2) /* put system into suspend */
#define APM_IOC_GETPOWER _IOR('A', 3, struct apm_power_info) /* fetch battery state */
#define APM_IOC_NEXTEVENT _IOR('A', 4, struct apm_event_info) /* fetch event */
#define APM_IOC_DEV_CTL _IOW('A', 5, struct apm_ctl) /* put device into mode */
struct apm_attach_args {
char *aaa_busname;
};
#ifdef _KERNEL
extern struct apm_connect_info apminfo; /* in locore */
extern int apmpresent;
extern int apmcall __P((int function, struct apmregs *regs));
extern void bioscall __P((int function, struct apmregs *regs));
extern void apm_cpu_busy __P((void));
extern void apm_cpu_idle __P((void));
extern void apminit __P((void));
int apm_set_powstate __P((u_int devid, u_int powstate));
extern int apm_busprobe __P((void));
#endif /* _KERNEL */
#endif /* _LOCORE */
#endif /* __i386_apm_h__ */