2438 lines
65 KiB
C
2438 lines
65 KiB
C
/* $NetBSD: if_msk.c,v 1.27 2009/05/12 08:23:00 cegger Exp $ */
|
|
/* $OpenBSD: if_msk.c,v 1.42 2007/01/17 02:43:02 krw Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1997, 1998, 1999, 2000
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD: /c/ncvs/src/sys/pci/if_sk.c,v 1.20 2000/04/22 02:16:37 wpaul Exp $
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 2003 Nathan L. Binkert <binkertn@umich.edu>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: if_msk.c,v 1.27 2009/05/12 08:23:00 cegger Exp $");
|
|
|
|
#include "bpfilter.h"
|
|
#include "rnd.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/device.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/endian.h>
|
|
#ifdef __NetBSD__
|
|
#define letoh16 htole16
|
|
#define letoh32 htole32
|
|
#endif
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_types.h>
|
|
|
|
#include <net/if_media.h>
|
|
|
|
#if NBPFILTER > 0
|
|
#include <net/bpf.h>
|
|
#endif
|
|
#if NRND > 0
|
|
#include <sys/rnd.h>
|
|
#endif
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
#include <dev/mii/brgphyreg.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcidevs.h>
|
|
|
|
#include <dev/pci/if_skreg.h>
|
|
#include <dev/pci/if_mskvar.h>
|
|
|
|
int mskc_probe(device_t, cfdata_t, void *);
|
|
void mskc_attach(device_t, device_t self, void *aux);
|
|
static bool mskc_suspend(device_t PMF_FN_PROTO);
|
|
static bool mskc_resume(device_t PMF_FN_PROTO);
|
|
int msk_probe(device_t, cfdata_t, void *);
|
|
void msk_attach(device_t, device_t self, void *aux);
|
|
int mskcprint(void *, const char *);
|
|
int msk_intr(void *);
|
|
void msk_intr_yukon(struct sk_if_softc *);
|
|
__inline int msk_rxvalid(struct sk_softc *, u_int32_t, u_int32_t);
|
|
void msk_rxeof(struct sk_if_softc *, u_int16_t, u_int32_t);
|
|
void msk_txeof(struct sk_if_softc *, int);
|
|
int msk_encap(struct sk_if_softc *, struct mbuf *, u_int32_t *);
|
|
void msk_start(struct ifnet *);
|
|
int msk_ioctl(struct ifnet *, u_long, void *);
|
|
int msk_init(struct ifnet *);
|
|
void msk_init_yukon(struct sk_if_softc *);
|
|
void msk_stop(struct ifnet *, int);
|
|
void msk_watchdog(struct ifnet *);
|
|
void msk_reset(struct sk_softc *);
|
|
int msk_newbuf(struct sk_if_softc *, int, struct mbuf *, bus_dmamap_t);
|
|
int msk_alloc_jumbo_mem(struct sk_if_softc *);
|
|
void *msk_jalloc(struct sk_if_softc *);
|
|
void msk_jfree(struct mbuf *, void *, size_t, void *);
|
|
int msk_init_rx_ring(struct sk_if_softc *);
|
|
int msk_init_tx_ring(struct sk_if_softc *);
|
|
|
|
void msk_update_int_mod(struct sk_softc *);
|
|
|
|
int msk_miibus_readreg(device_t, int, int);
|
|
void msk_miibus_writereg(device_t, int, int, int);
|
|
void msk_miibus_statchg(device_t);
|
|
|
|
void msk_setfilt(struct sk_if_softc *, void *, int);
|
|
void msk_setmulti(struct sk_if_softc *);
|
|
void msk_setpromisc(struct sk_if_softc *);
|
|
void msk_tick(void *);
|
|
|
|
/* #define MSK_DEBUG 1 */
|
|
#ifdef MSK_DEBUG
|
|
#define DPRINTF(x) if (mskdebug) printf x
|
|
#define DPRINTFN(n,x) if (mskdebug >= (n)) printf x
|
|
int mskdebug = MSK_DEBUG;
|
|
|
|
void msk_dump_txdesc(struct msk_tx_desc *, int);
|
|
void msk_dump_mbuf(struct mbuf *);
|
|
void msk_dump_bytes(const char *, int);
|
|
#else
|
|
#define DPRINTF(x)
|
|
#define DPRINTFN(n,x)
|
|
#endif
|
|
|
|
static int msk_sysctl_handler(SYSCTLFN_PROTO);
|
|
static int msk_root_num;
|
|
|
|
/* supported device vendors */
|
|
static const struct msk_product {
|
|
pci_vendor_id_t msk_vendor;
|
|
pci_product_id_t msk_product;
|
|
} msk_products[] = {
|
|
{ PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DGE550SX },
|
|
{ PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DGE560SX },
|
|
{ PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DGE560T },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_1 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_C032 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_C033 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_C034 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_C036 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_C042 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_C055 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_8035 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_8036 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_8038 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_8039 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_8050 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_8052 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_8053 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_8055 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKON_8056 },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKONII_8021CU },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKONII_8021X },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKONII_8022CU },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKONII_8022X },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKONII_8061CU },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKONII_8061X },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKONII_8062CU },
|
|
{ PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_YUKONII_8062X },
|
|
{ PCI_VENDOR_SCHNEIDERKOCH, PCI_PRODUCT_SCHNEIDERKOCH_SK_9SXX },
|
|
{ PCI_VENDOR_SCHNEIDERKOCH, PCI_PRODUCT_SCHNEIDERKOCH_SK_9E21 }
|
|
};
|
|
|
|
static inline u_int32_t
|
|
sk_win_read_4(struct sk_softc *sc, u_int32_t reg)
|
|
{
|
|
return CSR_READ_4(sc, reg);
|
|
}
|
|
|
|
static inline u_int16_t
|
|
sk_win_read_2(struct sk_softc *sc, u_int32_t reg)
|
|
{
|
|
return CSR_READ_2(sc, reg);
|
|
}
|
|
|
|
static inline u_int8_t
|
|
sk_win_read_1(struct sk_softc *sc, u_int32_t reg)
|
|
{
|
|
return CSR_READ_1(sc, reg);
|
|
}
|
|
|
|
static inline void
|
|
sk_win_write_4(struct sk_softc *sc, u_int32_t reg, u_int32_t x)
|
|
{
|
|
CSR_WRITE_4(sc, reg, x);
|
|
}
|
|
|
|
static inline void
|
|
sk_win_write_2(struct sk_softc *sc, u_int32_t reg, u_int16_t x)
|
|
{
|
|
CSR_WRITE_2(sc, reg, x);
|
|
}
|
|
|
|
static inline void
|
|
sk_win_write_1(struct sk_softc *sc, u_int32_t reg, u_int8_t x)
|
|
{
|
|
CSR_WRITE_1(sc, reg, x);
|
|
}
|
|
|
|
int
|
|
msk_miibus_readreg(device_t dev, int phy, int reg)
|
|
{
|
|
struct sk_if_softc *sc_if = device_private(dev);
|
|
u_int16_t val;
|
|
int i;
|
|
|
|
SK_YU_WRITE_2(sc_if, YUKON_SMICR, YU_SMICR_PHYAD(phy) |
|
|
YU_SMICR_REGAD(reg) | YU_SMICR_OP_READ);
|
|
|
|
for (i = 0; i < SK_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
val = SK_YU_READ_2(sc_if, YUKON_SMICR);
|
|
if (val & YU_SMICR_READ_VALID)
|
|
break;
|
|
}
|
|
|
|
if (i == SK_TIMEOUT) {
|
|
aprint_error_dev(&sc_if->sk_dev, "phy failed to come ready\n");
|
|
return (0);
|
|
}
|
|
|
|
DPRINTFN(9, ("msk_miibus_readreg: i=%d, timeout=%d\n", i,
|
|
SK_TIMEOUT));
|
|
|
|
val = SK_YU_READ_2(sc_if, YUKON_SMIDR);
|
|
|
|
DPRINTFN(9, ("msk_miibus_readreg phy=%d, reg=%#x, val=%#x\n",
|
|
phy, reg, val));
|
|
|
|
return (val);
|
|
}
|
|
|
|
void
|
|
msk_miibus_writereg(device_t dev, int phy, int reg, int val)
|
|
{
|
|
struct sk_if_softc *sc_if = device_private(dev);
|
|
int i;
|
|
|
|
DPRINTFN(9, ("msk_miibus_writereg phy=%d reg=%#x val=%#x\n",
|
|
phy, reg, val));
|
|
|
|
SK_YU_WRITE_2(sc_if, YUKON_SMIDR, val);
|
|
SK_YU_WRITE_2(sc_if, YUKON_SMICR, YU_SMICR_PHYAD(phy) |
|
|
YU_SMICR_REGAD(reg) | YU_SMICR_OP_WRITE);
|
|
|
|
for (i = 0; i < SK_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
if (!(SK_YU_READ_2(sc_if, YUKON_SMICR) & YU_SMICR_BUSY))
|
|
break;
|
|
}
|
|
|
|
if (i == SK_TIMEOUT)
|
|
aprint_error_dev(&sc_if->sk_dev, "phy write timed out\n");
|
|
}
|
|
|
|
void
|
|
msk_miibus_statchg(device_t dev)
|
|
{
|
|
struct sk_if_softc *sc_if = device_private(dev);
|
|
struct mii_data *mii = &sc_if->sk_mii;
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
|
int gpcr;
|
|
|
|
gpcr = SK_YU_READ_2(sc_if, YUKON_GPCR);
|
|
gpcr &= (YU_GPCR_TXEN | YU_GPCR_RXEN);
|
|
|
|
if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) {
|
|
/* Set speed. */
|
|
gpcr |= YU_GPCR_SPEED_DIS;
|
|
switch (IFM_SUBTYPE(mii->mii_media_active)) {
|
|
case IFM_1000_SX:
|
|
case IFM_1000_LX:
|
|
case IFM_1000_CX:
|
|
case IFM_1000_T:
|
|
gpcr |= (YU_GPCR_GIG | YU_GPCR_SPEED);
|
|
break;
|
|
case IFM_100_TX:
|
|
gpcr |= YU_GPCR_SPEED;
|
|
break;
|
|
}
|
|
|
|
/* Set duplex. */
|
|
gpcr |= YU_GPCR_DPLX_DIS;
|
|
if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX)
|
|
gpcr |= YU_GPCR_DUPLEX;
|
|
|
|
/* Disable flow control. */
|
|
gpcr |= YU_GPCR_FCTL_DIS;
|
|
gpcr |= (YU_GPCR_FCTL_TX_DIS | YU_GPCR_FCTL_RX_DIS);
|
|
}
|
|
|
|
SK_YU_WRITE_2(sc_if, YUKON_GPCR, gpcr);
|
|
|
|
DPRINTFN(9, ("msk_miibus_statchg: gpcr=%x\n",
|
|
SK_YU_READ_2(((struct sk_if_softc *)dev), YUKON_GPCR)));
|
|
}
|
|
|
|
#define HASH_BITS 6
|
|
|
|
void
|
|
msk_setfilt(struct sk_if_softc *sc_if, void *addrv, int slot)
|
|
{
|
|
char *addr = addrv;
|
|
int base = XM_RXFILT_ENTRY(slot);
|
|
|
|
SK_XM_WRITE_2(sc_if, base, *(u_int16_t *)(&addr[0]));
|
|
SK_XM_WRITE_2(sc_if, base + 2, *(u_int16_t *)(&addr[2]));
|
|
SK_XM_WRITE_2(sc_if, base + 4, *(u_int16_t *)(&addr[4]));
|
|
}
|
|
|
|
void
|
|
msk_setmulti(struct sk_if_softc *sc_if)
|
|
{
|
|
struct ifnet *ifp= &sc_if->sk_ethercom.ec_if;
|
|
u_int32_t hashes[2] = { 0, 0 };
|
|
int h;
|
|
struct ethercom *ec = &sc_if->sk_ethercom;
|
|
struct ether_multi *enm;
|
|
struct ether_multistep step;
|
|
u_int16_t reg;
|
|
|
|
/* First, zot all the existing filters. */
|
|
SK_YU_WRITE_2(sc_if, YUKON_MCAH1, 0);
|
|
SK_YU_WRITE_2(sc_if, YUKON_MCAH2, 0);
|
|
SK_YU_WRITE_2(sc_if, YUKON_MCAH3, 0);
|
|
SK_YU_WRITE_2(sc_if, YUKON_MCAH4, 0);
|
|
|
|
|
|
/* Now program new ones. */
|
|
reg = SK_YU_READ_2(sc_if, YUKON_RCR);
|
|
reg |= YU_RCR_UFLEN;
|
|
allmulti:
|
|
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
|
|
if ((ifp->if_flags & IFF_PROMISC) != 0)
|
|
reg &= ~(YU_RCR_UFLEN | YU_RCR_MUFLEN);
|
|
else if ((ifp->if_flags & IFF_ALLMULTI) != 0) {
|
|
hashes[0] = 0xFFFFFFFF;
|
|
hashes[1] = 0xFFFFFFFF;
|
|
}
|
|
} else {
|
|
/* First find the tail of the list. */
|
|
ETHER_FIRST_MULTI(step, ec, enm);
|
|
while (enm != NULL) {
|
|
if (memcmp(enm->enm_addrlo, enm->enm_addrhi,
|
|
ETHER_ADDR_LEN)) {
|
|
ifp->if_flags |= IFF_ALLMULTI;
|
|
goto allmulti;
|
|
}
|
|
h = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN) &
|
|
((1 << HASH_BITS) - 1);
|
|
if (h < 32)
|
|
hashes[0] |= (1 << h);
|
|
else
|
|
hashes[1] |= (1 << (h - 32));
|
|
|
|
ETHER_NEXT_MULTI(step, enm);
|
|
}
|
|
reg |= YU_RCR_MUFLEN;
|
|
}
|
|
|
|
SK_YU_WRITE_2(sc_if, YUKON_MCAH1, hashes[0] & 0xffff);
|
|
SK_YU_WRITE_2(sc_if, YUKON_MCAH2, (hashes[0] >> 16) & 0xffff);
|
|
SK_YU_WRITE_2(sc_if, YUKON_MCAH3, hashes[1] & 0xffff);
|
|
SK_YU_WRITE_2(sc_if, YUKON_MCAH4, (hashes[1] >> 16) & 0xffff);
|
|
SK_YU_WRITE_2(sc_if, YUKON_RCR, reg);
|
|
}
|
|
|
|
void
|
|
msk_setpromisc(struct sk_if_softc *sc_if)
|
|
{
|
|
struct ifnet *ifp = &sc_if->sk_ethercom.ec_if;
|
|
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
SK_YU_CLRBIT_2(sc_if, YUKON_RCR,
|
|
YU_RCR_UFLEN | YU_RCR_MUFLEN);
|
|
else
|
|
SK_YU_SETBIT_2(sc_if, YUKON_RCR,
|
|
YU_RCR_UFLEN | YU_RCR_MUFLEN);
|
|
}
|
|
|
|
int
|
|
msk_init_rx_ring(struct sk_if_softc *sc_if)
|
|
{
|
|
struct msk_chain_data *cd = &sc_if->sk_cdata;
|
|
struct msk_ring_data *rd = sc_if->sk_rdata;
|
|
int i, nexti;
|
|
|
|
memset((char *)rd->sk_rx_ring, 0,
|
|
sizeof(struct msk_rx_desc) * MSK_RX_RING_CNT);
|
|
|
|
for (i = 0; i < MSK_RX_RING_CNT; i++) {
|
|
cd->sk_rx_chain[i].sk_le = &rd->sk_rx_ring[i];
|
|
if (i == (MSK_RX_RING_CNT - 1))
|
|
nexti = 0;
|
|
else
|
|
nexti = i + 1;
|
|
cd->sk_rx_chain[i].sk_next = &cd->sk_rx_chain[nexti];
|
|
}
|
|
|
|
for (i = 0; i < MSK_RX_RING_CNT; i++) {
|
|
if (msk_newbuf(sc_if, i, NULL,
|
|
sc_if->sk_cdata.sk_rx_jumbo_map) == ENOBUFS) {
|
|
aprint_error_dev(&sc_if->sk_dev, "failed alloc of %dth mbuf\n", i);
|
|
return (ENOBUFS);
|
|
}
|
|
}
|
|
|
|
sc_if->sk_cdata.sk_rx_prod = MSK_RX_RING_CNT - 1;
|
|
sc_if->sk_cdata.sk_rx_cons = 0;
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
msk_init_tx_ring(struct sk_if_softc *sc_if)
|
|
{
|
|
struct sk_softc *sc = sc_if->sk_softc;
|
|
struct msk_chain_data *cd = &sc_if->sk_cdata;
|
|
struct msk_ring_data *rd = sc_if->sk_rdata;
|
|
bus_dmamap_t dmamap;
|
|
struct sk_txmap_entry *entry;
|
|
int i, nexti;
|
|
|
|
memset((char *)sc_if->sk_rdata->sk_tx_ring, 0,
|
|
sizeof(struct msk_tx_desc) * MSK_TX_RING_CNT);
|
|
|
|
SIMPLEQ_INIT(&sc_if->sk_txmap_head);
|
|
for (i = 0; i < MSK_TX_RING_CNT; i++) {
|
|
cd->sk_tx_chain[i].sk_le = &rd->sk_tx_ring[i];
|
|
if (i == (MSK_TX_RING_CNT - 1))
|
|
nexti = 0;
|
|
else
|
|
nexti = i + 1;
|
|
cd->sk_tx_chain[i].sk_next = &cd->sk_tx_chain[nexti];
|
|
|
|
if (bus_dmamap_create(sc->sc_dmatag, SK_JLEN, SK_NTXSEG,
|
|
SK_JLEN, 0, BUS_DMA_NOWAIT, &dmamap))
|
|
return (ENOBUFS);
|
|
|
|
entry = malloc(sizeof(*entry), M_DEVBUF, M_NOWAIT);
|
|
if (!entry) {
|
|
bus_dmamap_destroy(sc->sc_dmatag, dmamap);
|
|
return (ENOBUFS);
|
|
}
|
|
entry->dmamap = dmamap;
|
|
SIMPLEQ_INSERT_HEAD(&sc_if->sk_txmap_head, entry, link);
|
|
}
|
|
|
|
sc_if->sk_cdata.sk_tx_prod = 0;
|
|
sc_if->sk_cdata.sk_tx_cons = 0;
|
|
sc_if->sk_cdata.sk_tx_cnt = 0;
|
|
|
|
MSK_CDTXSYNC(sc_if, 0, MSK_TX_RING_CNT,
|
|
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
msk_newbuf(struct sk_if_softc *sc_if, int i, struct mbuf *m,
|
|
bus_dmamap_t dmamap)
|
|
{
|
|
struct mbuf *m_new = NULL;
|
|
struct sk_chain *c;
|
|
struct msk_rx_desc *r;
|
|
|
|
if (m == NULL) {
|
|
void *buf = NULL;
|
|
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
if (m_new == NULL)
|
|
return (ENOBUFS);
|
|
|
|
/* Allocate the jumbo buffer */
|
|
buf = msk_jalloc(sc_if);
|
|
if (buf == NULL) {
|
|
m_freem(m_new);
|
|
DPRINTFN(1, ("%s jumbo allocation failed -- packet "
|
|
"dropped!\n", sc_if->sk_ethercom.ec_if.if_xname));
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
/* Attach the buffer to the mbuf */
|
|
m_new->m_len = m_new->m_pkthdr.len = SK_JLEN;
|
|
MEXTADD(m_new, buf, SK_JLEN, 0, msk_jfree, sc_if);
|
|
} else {
|
|
/*
|
|
* We're re-using a previously allocated mbuf;
|
|
* be sure to re-init pointers and lengths to
|
|
* default values.
|
|
*/
|
|
m_new = m;
|
|
m_new->m_len = m_new->m_pkthdr.len = SK_JLEN;
|
|
m_new->m_data = m_new->m_ext.ext_buf;
|
|
}
|
|
m_adj(m_new, ETHER_ALIGN);
|
|
|
|
c = &sc_if->sk_cdata.sk_rx_chain[i];
|
|
r = c->sk_le;
|
|
c->sk_mbuf = m_new;
|
|
r->sk_addr = htole32(dmamap->dm_segs[0].ds_addr +
|
|
(((vaddr_t)m_new->m_data
|
|
- (vaddr_t)sc_if->sk_cdata.sk_jumbo_buf)));
|
|
r->sk_len = htole16(SK_JLEN);
|
|
r->sk_ctl = 0;
|
|
r->sk_opcode = SK_Y2_RXOPC_PACKET | SK_Y2_RXOPC_OWN;
|
|
|
|
MSK_CDRXSYNC(sc_if, i, BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Memory management for jumbo frames.
|
|
*/
|
|
|
|
int
|
|
msk_alloc_jumbo_mem(struct sk_if_softc *sc_if)
|
|
{
|
|
struct sk_softc *sc = sc_if->sk_softc;
|
|
char *ptr, *kva;
|
|
bus_dma_segment_t seg;
|
|
int i, rseg, state, error;
|
|
struct sk_jpool_entry *entry;
|
|
|
|
state = error = 0;
|
|
|
|
/* Grab a big chunk o' storage. */
|
|
if (bus_dmamem_alloc(sc->sc_dmatag, MSK_JMEM, PAGE_SIZE, 0,
|
|
&seg, 1, &rseg, BUS_DMA_NOWAIT)) {
|
|
aprint_error(": can't alloc rx buffers");
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
state = 1;
|
|
if (bus_dmamem_map(sc->sc_dmatag, &seg, rseg, MSK_JMEM, (void **)&kva,
|
|
BUS_DMA_NOWAIT)) {
|
|
aprint_error(": can't map dma buffers (%d bytes)", MSK_JMEM);
|
|
error = ENOBUFS;
|
|
goto out;
|
|
}
|
|
|
|
state = 2;
|
|
if (bus_dmamap_create(sc->sc_dmatag, MSK_JMEM, 1, MSK_JMEM, 0,
|
|
BUS_DMA_NOWAIT, &sc_if->sk_cdata.sk_rx_jumbo_map)) {
|
|
aprint_error(": can't create dma map");
|
|
error = ENOBUFS;
|
|
goto out;
|
|
}
|
|
|
|
state = 3;
|
|
if (bus_dmamap_load(sc->sc_dmatag, sc_if->sk_cdata.sk_rx_jumbo_map,
|
|
kva, MSK_JMEM, NULL, BUS_DMA_NOWAIT)) {
|
|
aprint_error(": can't load dma map");
|
|
error = ENOBUFS;
|
|
goto out;
|
|
}
|
|
|
|
state = 4;
|
|
sc_if->sk_cdata.sk_jumbo_buf = (void *)kva;
|
|
DPRINTFN(1,("msk_jumbo_buf = %p\n", (void *)sc_if->sk_cdata.sk_jumbo_buf));
|
|
|
|
LIST_INIT(&sc_if->sk_jfree_listhead);
|
|
LIST_INIT(&sc_if->sk_jinuse_listhead);
|
|
mutex_init(&sc_if->sk_jpool_mtx, MUTEX_DEFAULT, IPL_NET);
|
|
|
|
/*
|
|
* Now divide it up into 9K pieces and save the addresses
|
|
* in an array.
|
|
*/
|
|
ptr = sc_if->sk_cdata.sk_jumbo_buf;
|
|
for (i = 0; i < MSK_JSLOTS; i++) {
|
|
sc_if->sk_cdata.sk_jslots[i] = ptr;
|
|
ptr += SK_JLEN;
|
|
entry = malloc(sizeof(struct sk_jpool_entry),
|
|
M_DEVBUF, M_NOWAIT);
|
|
if (entry == NULL) {
|
|
sc_if->sk_cdata.sk_jumbo_buf = NULL;
|
|
aprint_error(": no memory for jumbo buffer queue!");
|
|
error = ENOBUFS;
|
|
goto out;
|
|
}
|
|
entry->slot = i;
|
|
LIST_INSERT_HEAD(&sc_if->sk_jfree_listhead,
|
|
entry, jpool_entries);
|
|
}
|
|
out:
|
|
if (error != 0) {
|
|
switch (state) {
|
|
case 4:
|
|
bus_dmamap_unload(sc->sc_dmatag,
|
|
sc_if->sk_cdata.sk_rx_jumbo_map);
|
|
case 3:
|
|
bus_dmamap_destroy(sc->sc_dmatag,
|
|
sc_if->sk_cdata.sk_rx_jumbo_map);
|
|
case 2:
|
|
bus_dmamem_unmap(sc->sc_dmatag, kva, MSK_JMEM);
|
|
case 1:
|
|
bus_dmamem_free(sc->sc_dmatag, &seg, rseg);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Allocate a jumbo buffer.
|
|
*/
|
|
void *
|
|
msk_jalloc(struct sk_if_softc *sc_if)
|
|
{
|
|
struct sk_jpool_entry *entry;
|
|
|
|
mutex_enter(&sc_if->sk_jpool_mtx);
|
|
entry = LIST_FIRST(&sc_if->sk_jfree_listhead);
|
|
|
|
if (entry == NULL) {
|
|
mutex_exit(&sc_if->sk_jpool_mtx);
|
|
return NULL;
|
|
}
|
|
|
|
LIST_REMOVE(entry, jpool_entries);
|
|
LIST_INSERT_HEAD(&sc_if->sk_jinuse_listhead, entry, jpool_entries);
|
|
mutex_exit(&sc_if->sk_jpool_mtx);
|
|
return (sc_if->sk_cdata.sk_jslots[entry->slot]);
|
|
}
|
|
|
|
/*
|
|
* Release a jumbo buffer.
|
|
*/
|
|
void
|
|
msk_jfree(struct mbuf *m, void *buf, size_t size, void *arg)
|
|
{
|
|
struct sk_jpool_entry *entry;
|
|
struct sk_if_softc *sc;
|
|
int i;
|
|
|
|
/* Extract the softc struct pointer. */
|
|
sc = (struct sk_if_softc *)arg;
|
|
|
|
if (sc == NULL)
|
|
panic("msk_jfree: can't find softc pointer!");
|
|
|
|
/* calculate the slot this buffer belongs to */
|
|
i = ((vaddr_t)buf
|
|
- (vaddr_t)sc->sk_cdata.sk_jumbo_buf) / SK_JLEN;
|
|
|
|
if ((i < 0) || (i >= MSK_JSLOTS))
|
|
panic("msk_jfree: asked to free buffer that we don't manage!");
|
|
|
|
mutex_enter(&sc->sk_jpool_mtx);
|
|
entry = LIST_FIRST(&sc->sk_jinuse_listhead);
|
|
if (entry == NULL)
|
|
panic("msk_jfree: buffer not in use!");
|
|
entry->slot = i;
|
|
LIST_REMOVE(entry, jpool_entries);
|
|
LIST_INSERT_HEAD(&sc->sk_jfree_listhead, entry, jpool_entries);
|
|
mutex_exit(&sc->sk_jpool_mtx);
|
|
|
|
if (__predict_true(m != NULL))
|
|
pool_cache_put(mb_cache, m);
|
|
}
|
|
|
|
int
|
|
msk_ioctl(struct ifnet *ifp, u_long cmd, void *data)
|
|
{
|
|
struct sk_if_softc *sc_if = ifp->if_softc;
|
|
int s, error = 0;
|
|
|
|
s = splnet();
|
|
|
|
DPRINTFN(2, ("msk_ioctl ETHER\n"));
|
|
error = ether_ioctl(ifp, cmd, data);
|
|
|
|
if (error == ENETRESET) {
|
|
error = 0;
|
|
if (cmd != SIOCADDMULTI && cmd != SIOCDELMULTI)
|
|
;
|
|
else if (ifp->if_flags & IFF_RUNNING) {
|
|
/*
|
|
* Multicast list has changed; set the hardware
|
|
* filter accordingly.
|
|
*/
|
|
msk_setmulti(sc_if);
|
|
}
|
|
}
|
|
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
|
|
void
|
|
msk_update_int_mod(struct sk_softc *sc)
|
|
{
|
|
u_int32_t imtimer_ticks;
|
|
|
|
/*
|
|
* Configure interrupt moderation. The moderation timer
|
|
* defers interrupts specified in the interrupt moderation
|
|
* timer mask based on the timeout specified in the interrupt
|
|
* moderation timer init register. Each bit in the timer
|
|
* register represents one tick, so to specify a timeout in
|
|
* microseconds, we have to multiply by the correct number of
|
|
* ticks-per-microsecond.
|
|
*/
|
|
switch (sc->sk_type) {
|
|
case SK_YUKON_EC:
|
|
case SK_YUKON_EC_U:
|
|
imtimer_ticks = SK_IMTIMER_TICKS_YUKON_EC;
|
|
break;
|
|
case SK_YUKON_FE:
|
|
imtimer_ticks = SK_IMTIMER_TICKS_YUKON_FE;
|
|
break;
|
|
case SK_YUKON_XL:
|
|
imtimer_ticks = SK_IMTIMER_TICKS_YUKON_XL;
|
|
break;
|
|
default:
|
|
imtimer_ticks = SK_IMTIMER_TICKS_YUKON;
|
|
}
|
|
aprint_verbose_dev(&sc->sk_dev, "interrupt moderation is %d us\n",
|
|
sc->sk_int_mod);
|
|
sk_win_write_4(sc, SK_IMTIMERINIT, SK_IM_USECS(sc->sk_int_mod));
|
|
sk_win_write_4(sc, SK_IMMR, SK_ISR_TX1_S_EOF|SK_ISR_TX2_S_EOF|
|
|
SK_ISR_RX1_EOF|SK_ISR_RX2_EOF);
|
|
sk_win_write_1(sc, SK_IMTIMERCTL, SK_IMCTL_START);
|
|
sc->sk_int_mod_pending = 0;
|
|
}
|
|
|
|
static int
|
|
msk_lookup(const struct pci_attach_args *pa)
|
|
{
|
|
const struct msk_product *pmsk;
|
|
|
|
for ( pmsk = &msk_products[0]; pmsk->msk_vendor != 0; pmsk++) {
|
|
if (PCI_VENDOR(pa->pa_id) == pmsk->msk_vendor &&
|
|
PCI_PRODUCT(pa->pa_id) == pmsk->msk_product)
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Probe for a SysKonnect GEnesis chip. Check the PCI vendor and device
|
|
* IDs against our list and return a device name if we find a match.
|
|
*/
|
|
int
|
|
mskc_probe(device_t parent, cfdata_t match, void *aux)
|
|
{
|
|
struct pci_attach_args *pa = (struct pci_attach_args *)aux;
|
|
|
|
return msk_lookup(pa);
|
|
}
|
|
|
|
/*
|
|
* Force the GEnesis into reset, then bring it out of reset.
|
|
*/
|
|
void msk_reset(struct sk_softc *sc)
|
|
{
|
|
u_int32_t imtimer_ticks, reg1;
|
|
int reg;
|
|
|
|
DPRINTFN(2, ("msk_reset\n"));
|
|
|
|
CSR_WRITE_1(sc, SK_CSR, SK_CSR_SW_RESET);
|
|
CSR_WRITE_1(sc, SK_CSR, SK_CSR_MASTER_RESET);
|
|
|
|
DELAY(1000);
|
|
CSR_WRITE_1(sc, SK_CSR, SK_CSR_SW_UNRESET);
|
|
DELAY(2);
|
|
CSR_WRITE_1(sc, SK_CSR, SK_CSR_MASTER_UNRESET);
|
|
sk_win_write_1(sc, SK_TESTCTL1, 2);
|
|
|
|
reg1 = sk_win_read_4(sc, SK_Y2_PCI_REG(SK_PCI_OURREG1));
|
|
if (sc->sk_type == SK_YUKON_XL && sc->sk_rev > SK_YUKON_XL_REV_A1)
|
|
reg1 |= (SK_Y2_REG1_PHY1_COMA | SK_Y2_REG1_PHY2_COMA);
|
|
else
|
|
reg1 &= ~(SK_Y2_REG1_PHY1_COMA | SK_Y2_REG1_PHY2_COMA);
|
|
|
|
if (sc->sk_type == SK_YUKON_EC_U) {
|
|
uint32_t our;
|
|
|
|
CSR_WRITE_2(sc, SK_CSR, SK_CSR_WOL_ON);
|
|
|
|
/* enable all clocks. */
|
|
sk_win_write_4(sc, SK_Y2_PCI_REG(SK_PCI_OURREG3), 0);
|
|
our = sk_win_read_4(sc, SK_Y2_PCI_REG(SK_PCI_OURREG4));
|
|
our &= (SK_Y2_REG4_FORCE_ASPM_REQUEST|
|
|
SK_Y2_REG4_ASPM_GPHY_LINK_DOWN|
|
|
SK_Y2_REG4_ASPM_INT_FIFO_EMPTY|
|
|
SK_Y2_REG4_ASPM_CLKRUN_REQUEST);
|
|
/* Set all bits to 0 except bits 15..12 */
|
|
sk_win_write_4(sc, SK_Y2_PCI_REG(SK_PCI_OURREG4), our);
|
|
/* Set to default value */
|
|
sk_win_write_4(sc, SK_Y2_PCI_REG(SK_PCI_OURREG5), 0);
|
|
}
|
|
|
|
/* release PHY from PowerDown/Coma mode. */
|
|
sk_win_write_4(sc, SK_Y2_PCI_REG(SK_PCI_OURREG1), reg1);
|
|
|
|
if (sc->sk_type == SK_YUKON_XL && sc->sk_rev > SK_YUKON_XL_REV_A1)
|
|
sk_win_write_1(sc, SK_Y2_CLKGATE,
|
|
SK_Y2_CLKGATE_LINK1_GATE_DIS |
|
|
SK_Y2_CLKGATE_LINK2_GATE_DIS |
|
|
SK_Y2_CLKGATE_LINK1_CORE_DIS |
|
|
SK_Y2_CLKGATE_LINK2_CORE_DIS |
|
|
SK_Y2_CLKGATE_LINK1_PCI_DIS | SK_Y2_CLKGATE_LINK2_PCI_DIS);
|
|
else
|
|
sk_win_write_1(sc, SK_Y2_CLKGATE, 0);
|
|
|
|
CSR_WRITE_2(sc, SK_LINK_CTRL, SK_LINK_RESET_SET);
|
|
CSR_WRITE_2(sc, SK_LINK_CTRL + SK_WIN_LEN, SK_LINK_RESET_SET);
|
|
DELAY(1000);
|
|
CSR_WRITE_2(sc, SK_LINK_CTRL, SK_LINK_RESET_CLEAR);
|
|
CSR_WRITE_2(sc, SK_LINK_CTRL + SK_WIN_LEN, SK_LINK_RESET_CLEAR);
|
|
|
|
sk_win_write_1(sc, SK_TESTCTL1, 1);
|
|
|
|
DPRINTFN(2, ("msk_reset: sk_csr=%x\n", CSR_READ_1(sc, SK_CSR)));
|
|
DPRINTFN(2, ("msk_reset: sk_link_ctrl=%x\n",
|
|
CSR_READ_2(sc, SK_LINK_CTRL)));
|
|
|
|
/* Disable ASF */
|
|
CSR_WRITE_1(sc, SK_Y2_ASF_CSR, SK_Y2_ASF_RESET);
|
|
CSR_WRITE_2(sc, SK_CSR, SK_CSR_ASF_OFF);
|
|
|
|
/* Clear I2C IRQ noise */
|
|
CSR_WRITE_4(sc, SK_I2CHWIRQ, 1);
|
|
|
|
/* Disable hardware timer */
|
|
CSR_WRITE_1(sc, SK_TIMERCTL, SK_IMCTL_STOP);
|
|
CSR_WRITE_1(sc, SK_TIMERCTL, SK_IMCTL_IRQ_CLEAR);
|
|
|
|
/* Disable descriptor polling */
|
|
CSR_WRITE_4(sc, SK_DPT_TIMER_CTRL, SK_DPT_TCTL_STOP);
|
|
|
|
/* Disable time stamps */
|
|
CSR_WRITE_1(sc, SK_TSTAMP_CTL, SK_TSTAMP_STOP);
|
|
CSR_WRITE_1(sc, SK_TSTAMP_CTL, SK_TSTAMP_IRQ_CLEAR);
|
|
|
|
/* Enable RAM interface */
|
|
sk_win_write_1(sc, SK_RAMCTL, SK_RAMCTL_UNRESET);
|
|
for (reg = SK_TO0;reg <= SK_TO11; reg++)
|
|
sk_win_write_1(sc, reg, 36);
|
|
sk_win_write_1(sc, SK_RAMCTL + (SK_WIN_LEN / 2), SK_RAMCTL_UNRESET);
|
|
for (reg = SK_TO0;reg <= SK_TO11; reg++)
|
|
sk_win_write_1(sc, reg + (SK_WIN_LEN / 2), 36);
|
|
|
|
/*
|
|
* Configure interrupt moderation. The moderation timer
|
|
* defers interrupts specified in the interrupt moderation
|
|
* timer mask based on the timeout specified in the interrupt
|
|
* moderation timer init register. Each bit in the timer
|
|
* register represents one tick, so to specify a timeout in
|
|
* microseconds, we have to multiply by the correct number of
|
|
* ticks-per-microsecond.
|
|
*/
|
|
switch (sc->sk_type) {
|
|
case SK_YUKON_EC:
|
|
case SK_YUKON_EC_U:
|
|
imtimer_ticks = SK_IMTIMER_TICKS_YUKON_EC;
|
|
break;
|
|
case SK_YUKON_FE:
|
|
imtimer_ticks = SK_IMTIMER_TICKS_YUKON_FE;
|
|
break;
|
|
case SK_YUKON_XL:
|
|
imtimer_ticks = SK_IMTIMER_TICKS_YUKON_XL;
|
|
break;
|
|
default:
|
|
imtimer_ticks = SK_IMTIMER_TICKS_YUKON;
|
|
}
|
|
|
|
/* Reset status ring. */
|
|
memset((char *)sc->sk_status_ring, 0,
|
|
MSK_STATUS_RING_CNT * sizeof(struct msk_status_desc));
|
|
bus_dmamap_sync(sc->sc_dmatag, sc->sk_status_map, 0,
|
|
sc->sk_status_map->dm_mapsize, BUS_DMASYNC_PREREAD);
|
|
sc->sk_status_idx = 0;
|
|
sc->sk_status_own_idx = 0;
|
|
|
|
sk_win_write_4(sc, SK_STAT_BMU_CSR, SK_STAT_BMU_RESET);
|
|
sk_win_write_4(sc, SK_STAT_BMU_CSR, SK_STAT_BMU_UNRESET);
|
|
|
|
sk_win_write_2(sc, SK_STAT_BMU_LIDX, MSK_STATUS_RING_CNT - 1);
|
|
sk_win_write_4(sc, SK_STAT_BMU_ADDRLO,
|
|
sc->sk_status_map->dm_segs[0].ds_addr);
|
|
sk_win_write_4(sc, SK_STAT_BMU_ADDRHI,
|
|
(u_int64_t)sc->sk_status_map->dm_segs[0].ds_addr >> 32);
|
|
if ((sc->sk_workaround & SK_STAT_BMU_FIFOIWM) != 0) {
|
|
sk_win_write_2(sc, SK_STAT_BMU_TX_THRESH, SK_STAT_BMU_TXTHIDX_MSK);
|
|
sk_win_write_1(sc, SK_STAT_BMU_FIFOWM, 0x21);
|
|
sk_win_write_1(sc, SK_STAT_BMU_FIFOIWM, 0x07);
|
|
} else {
|
|
sk_win_write_2(sc, SK_STAT_BMU_TX_THRESH, 0x000a);
|
|
sk_win_write_1(sc, SK_STAT_BMU_FIFOWM, 0x10);
|
|
sk_win_write_1(sc, SK_STAT_BMU_FIFOIWM,
|
|
((sc->sk_workaround & SK_WA_4109) != 0) ? 0x10 : 0x04);
|
|
sk_win_write_4(sc, SK_Y2_ISR_ITIMERINIT, 0x0190); /* 3.2us on Yukon-EC */
|
|
}
|
|
|
|
#if 0
|
|
sk_win_write_4(sc, SK_Y2_LEV_ITIMERINIT, SK_IM_USECS(100));
|
|
#endif
|
|
sk_win_write_4(sc, SK_Y2_TX_ITIMERINIT, SK_IM_USECS(1000));
|
|
|
|
sk_win_write_4(sc, SK_STAT_BMU_CSR, SK_STAT_BMU_ON);
|
|
|
|
sk_win_write_1(sc, SK_Y2_LEV_ITIMERCTL, SK_IMCTL_START);
|
|
sk_win_write_1(sc, SK_Y2_TX_ITIMERCTL, SK_IMCTL_START);
|
|
sk_win_write_1(sc, SK_Y2_ISR_ITIMERCTL, SK_IMCTL_START);
|
|
|
|
msk_update_int_mod(sc);
|
|
}
|
|
|
|
int
|
|
msk_probe(device_t parent, cfdata_t match, void *aux)
|
|
{
|
|
struct skc_attach_args *sa = aux;
|
|
|
|
if (sa->skc_port != SK_PORT_A && sa->skc_port != SK_PORT_B)
|
|
return (0);
|
|
|
|
switch (sa->skc_type) {
|
|
case SK_YUKON_XL:
|
|
case SK_YUKON_EC_U:
|
|
case SK_YUKON_EC:
|
|
case SK_YUKON_FE:
|
|
return (1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static bool
|
|
msk_resume(device_t dv PMF_FN_ARGS)
|
|
{
|
|
struct sk_if_softc *sc_if = device_private(dv);
|
|
|
|
msk_init_yukon(sc_if);
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Each XMAC chip is attached as a separate logical IP interface.
|
|
* Single port cards will have only one logical interface of course.
|
|
*/
|
|
void
|
|
msk_attach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct sk_if_softc *sc_if = device_private(self);
|
|
struct sk_softc *sc = device_private(parent);
|
|
struct skc_attach_args *sa = aux;
|
|
struct ifnet *ifp;
|
|
void *kva;
|
|
bus_dma_segment_t seg;
|
|
int i, rseg;
|
|
u_int32_t chunk, val;
|
|
|
|
sc_if->sk_port = sa->skc_port;
|
|
sc_if->sk_softc = sc;
|
|
sc->sk_if[sa->skc_port] = sc_if;
|
|
|
|
DPRINTFN(2, ("begin msk_attach: port=%d\n", sc_if->sk_port));
|
|
|
|
/*
|
|
* Get station address for this interface. Note that
|
|
* dual port cards actually come with three station
|
|
* addresses: one for each port, plus an extra. The
|
|
* extra one is used by the SysKonnect driver software
|
|
* as a 'virtual' station address for when both ports
|
|
* are operating in failover mode. Currently we don't
|
|
* use this extra address.
|
|
*/
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
sc_if->sk_enaddr[i] =
|
|
sk_win_read_1(sc, SK_MAC0_0 + (sa->skc_port * 8) + i);
|
|
|
|
aprint_normal(": Ethernet address %s\n",
|
|
ether_sprintf(sc_if->sk_enaddr));
|
|
|
|
/*
|
|
* Set up RAM buffer addresses. The NIC will have a certain
|
|
* amount of SRAM on it, somewhere between 512K and 2MB. We
|
|
* need to divide this up a) between the transmitter and
|
|
* receiver and b) between the two XMACs, if this is a
|
|
* dual port NIC. Our algorithm is to divide up the memory
|
|
* evenly so that everyone gets a fair share.
|
|
*
|
|
* Just to be contrary, Yukon2 appears to have separate memory
|
|
* for each MAC.
|
|
*/
|
|
chunk = sc->sk_ramsize - (sc->sk_ramsize + 2) / 3;
|
|
val = sc->sk_rboff / sizeof(u_int64_t);
|
|
sc_if->sk_rx_ramstart = val;
|
|
val += (chunk / sizeof(u_int64_t));
|
|
sc_if->sk_rx_ramend = val - 1;
|
|
chunk = sc->sk_ramsize - chunk;
|
|
sc_if->sk_tx_ramstart = val;
|
|
val += (chunk / sizeof(u_int64_t));
|
|
sc_if->sk_tx_ramend = val - 1;
|
|
|
|
DPRINTFN(2, ("msk_attach: rx_ramstart=%#x rx_ramend=%#x\n"
|
|
" tx_ramstart=%#x tx_ramend=%#x\n",
|
|
sc_if->sk_rx_ramstart, sc_if->sk_rx_ramend,
|
|
sc_if->sk_tx_ramstart, sc_if->sk_tx_ramend));
|
|
|
|
/* Allocate the descriptor queues. */
|
|
if (bus_dmamem_alloc(sc->sc_dmatag, sizeof(struct msk_ring_data),
|
|
PAGE_SIZE, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT)) {
|
|
aprint_error(": can't alloc rx buffers\n");
|
|
goto fail;
|
|
}
|
|
if (bus_dmamem_map(sc->sc_dmatag, &seg, rseg,
|
|
sizeof(struct msk_ring_data), &kva, BUS_DMA_NOWAIT)) {
|
|
aprint_error(": can't map dma buffers (%zu bytes)\n",
|
|
sizeof(struct msk_ring_data));
|
|
goto fail_1;
|
|
}
|
|
if (bus_dmamap_create(sc->sc_dmatag, sizeof(struct msk_ring_data), 1,
|
|
sizeof(struct msk_ring_data), 0, BUS_DMA_NOWAIT,
|
|
&sc_if->sk_ring_map)) {
|
|
aprint_error(": can't create dma map\n");
|
|
goto fail_2;
|
|
}
|
|
if (bus_dmamap_load(sc->sc_dmatag, sc_if->sk_ring_map, kva,
|
|
sizeof(struct msk_ring_data), NULL, BUS_DMA_NOWAIT)) {
|
|
aprint_error(": can't load dma map\n");
|
|
goto fail_3;
|
|
}
|
|
sc_if->sk_rdata = (struct msk_ring_data *)kva;
|
|
memset(sc_if->sk_rdata, 0, sizeof(struct msk_ring_data));
|
|
|
|
ifp = &sc_if->sk_ethercom.ec_if;
|
|
/* Try to allocate memory for jumbo buffers. */
|
|
if (msk_alloc_jumbo_mem(sc_if)) {
|
|
aprint_error(": jumbo buffer allocation failed\n");
|
|
goto fail_3;
|
|
}
|
|
sc_if->sk_ethercom.ec_capabilities = ETHERCAP_VLAN_MTU;
|
|
if (sc->sk_type != SK_YUKON_FE)
|
|
sc_if->sk_ethercom.ec_capabilities |= ETHERCAP_JUMBO_MTU;
|
|
|
|
ifp->if_softc = sc_if;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = msk_ioctl;
|
|
ifp->if_start = msk_start;
|
|
ifp->if_stop = msk_stop;
|
|
ifp->if_init = msk_init;
|
|
ifp->if_watchdog = msk_watchdog;
|
|
ifp->if_baudrate = 1000000000;
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, MSK_TX_RING_CNT - 1);
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
strlcpy(ifp->if_xname, device_xname(&sc_if->sk_dev), IFNAMSIZ);
|
|
|
|
/*
|
|
* Do miibus setup.
|
|
*/
|
|
msk_init_yukon(sc_if);
|
|
|
|
DPRINTFN(2, ("msk_attach: 1\n"));
|
|
|
|
sc_if->sk_mii.mii_ifp = ifp;
|
|
sc_if->sk_mii.mii_readreg = msk_miibus_readreg;
|
|
sc_if->sk_mii.mii_writereg = msk_miibus_writereg;
|
|
sc_if->sk_mii.mii_statchg = msk_miibus_statchg;
|
|
|
|
sc_if->sk_ethercom.ec_mii = &sc_if->sk_mii;
|
|
ifmedia_init(&sc_if->sk_mii.mii_media, 0,
|
|
ether_mediachange, ether_mediastatus);
|
|
mii_attach(self, &sc_if->sk_mii, 0xffffffff, MII_PHY_ANY,
|
|
MII_OFFSET_ANY, MIIF_DOPAUSE|MIIF_FORCEANEG);
|
|
if (LIST_FIRST(&sc_if->sk_mii.mii_phys) == NULL) {
|
|
aprint_error_dev(&sc_if->sk_dev, "no PHY found!\n");
|
|
ifmedia_add(&sc_if->sk_mii.mii_media, IFM_ETHER|IFM_MANUAL,
|
|
0, NULL);
|
|
ifmedia_set(&sc_if->sk_mii.mii_media, IFM_ETHER|IFM_MANUAL);
|
|
} else
|
|
ifmedia_set(&sc_if->sk_mii.mii_media, IFM_ETHER|IFM_AUTO);
|
|
|
|
callout_init(&sc_if->sk_tick_ch, 0);
|
|
callout_setfunc(&sc_if->sk_tick_ch, msk_tick, sc_if);
|
|
callout_schedule(&sc_if->sk_tick_ch, hz);
|
|
|
|
/*
|
|
* Call MI attach routines.
|
|
*/
|
|
if_attach(ifp);
|
|
ether_ifattach(ifp, sc_if->sk_enaddr);
|
|
|
|
if (!pmf_device_register(self, NULL, msk_resume))
|
|
aprint_error_dev(self, "couldn't establish power handler\n");
|
|
else
|
|
pmf_class_network_register(self, ifp);
|
|
|
|
#if NRND > 0
|
|
rnd_attach_source(&sc->rnd_source, device_xname(&sc->sk_dev),
|
|
RND_TYPE_NET, 0);
|
|
#endif
|
|
|
|
DPRINTFN(2, ("msk_attach: end\n"));
|
|
return;
|
|
|
|
fail_3:
|
|
bus_dmamap_destroy(sc->sc_dmatag, sc_if->sk_ring_map);
|
|
fail_2:
|
|
bus_dmamem_unmap(sc->sc_dmatag, kva, sizeof(struct msk_ring_data));
|
|
fail_1:
|
|
bus_dmamem_free(sc->sc_dmatag, &seg, rseg);
|
|
fail:
|
|
sc->sk_if[sa->skc_port] = NULL;
|
|
}
|
|
|
|
int
|
|
mskcprint(void *aux, const char *pnp)
|
|
{
|
|
struct skc_attach_args *sa = aux;
|
|
|
|
if (pnp)
|
|
aprint_normal("sk port %c at %s",
|
|
(sa->skc_port == SK_PORT_A) ? 'A' : 'B', pnp);
|
|
else
|
|
aprint_normal(" port %c", (sa->skc_port == SK_PORT_A) ? 'A' : 'B');
|
|
return (UNCONF);
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
void
|
|
mskc_attach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct sk_softc *sc = device_private(self);
|
|
struct pci_attach_args *pa = aux;
|
|
struct skc_attach_args skca;
|
|
pci_chipset_tag_t pc = pa->pa_pc;
|
|
pcireg_t command, memtype;
|
|
pci_intr_handle_t ih;
|
|
const char *intrstr = NULL;
|
|
bus_size_t size;
|
|
int rc, sk_nodenum;
|
|
u_int8_t hw, skrs;
|
|
const char *revstr = NULL;
|
|
const struct sysctlnode *node;
|
|
void *kva;
|
|
bus_dma_segment_t seg;
|
|
int rseg;
|
|
|
|
DPRINTFN(2, ("begin mskc_attach\n"));
|
|
|
|
/*
|
|
* Handle power management nonsense.
|
|
*/
|
|
command = pci_conf_read(pc, pa->pa_tag, SK_PCI_CAPID) & 0x000000FF;
|
|
|
|
if (command == 0x01) {
|
|
command = pci_conf_read(pc, pa->pa_tag, SK_PCI_PWRMGMTCTRL);
|
|
if (command & SK_PSTATE_MASK) {
|
|
u_int32_t iobase, membase, irq;
|
|
|
|
/* Save important PCI config data. */
|
|
iobase = pci_conf_read(pc, pa->pa_tag, SK_PCI_LOIO);
|
|
membase = pci_conf_read(pc, pa->pa_tag, SK_PCI_LOMEM);
|
|
irq = pci_conf_read(pc, pa->pa_tag, SK_PCI_INTLINE);
|
|
|
|
/* Reset the power state. */
|
|
aprint_normal_dev(&sc->sk_dev, "chip is in D%d power mode "
|
|
"-- setting to D0\n",
|
|
command & SK_PSTATE_MASK);
|
|
command &= 0xFFFFFFFC;
|
|
pci_conf_write(pc, pa->pa_tag,
|
|
SK_PCI_PWRMGMTCTRL, command);
|
|
|
|
/* Restore PCI config data. */
|
|
pci_conf_write(pc, pa->pa_tag, SK_PCI_LOIO, iobase);
|
|
pci_conf_write(pc, pa->pa_tag, SK_PCI_LOMEM, membase);
|
|
pci_conf_write(pc, pa->pa_tag, SK_PCI_INTLINE, irq);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
|
|
memtype = pci_mapreg_type(pc, pa->pa_tag, SK_PCI_LOMEM);
|
|
switch (memtype) {
|
|
case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT:
|
|
case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT:
|
|
if (pci_mapreg_map(pa, SK_PCI_LOMEM,
|
|
memtype, 0, &sc->sk_btag, &sc->sk_bhandle,
|
|
NULL, &size) == 0)
|
|
break;
|
|
default:
|
|
aprint_error(": can't map mem space\n");
|
|
return;
|
|
}
|
|
|
|
sc->sc_dmatag = pa->pa_dmat;
|
|
|
|
sc->sk_type = sk_win_read_1(sc, SK_CHIPVER);
|
|
sc->sk_rev = (sk_win_read_1(sc, SK_CONFIG) >> 4);
|
|
|
|
/* bail out here if chip is not recognized */
|
|
if (!(SK_IS_YUKON2(sc))) {
|
|
aprint_error(": unknown chip type: %d\n", sc->sk_type);
|
|
goto fail_1;
|
|
}
|
|
DPRINTFN(2, ("mskc_attach: allocate interrupt\n"));
|
|
|
|
/* Allocate interrupt */
|
|
if (pci_intr_map(pa, &ih)) {
|
|
aprint_error(": couldn't map interrupt\n");
|
|
goto fail_1;
|
|
}
|
|
|
|
intrstr = pci_intr_string(pc, ih);
|
|
sc->sk_intrhand = pci_intr_establish(pc, ih, IPL_NET, msk_intr, sc);
|
|
if (sc->sk_intrhand == NULL) {
|
|
aprint_error(": couldn't establish interrupt");
|
|
if (intrstr != NULL)
|
|
aprint_error(" at %s", intrstr);
|
|
aprint_error("\n");
|
|
goto fail_1;
|
|
}
|
|
|
|
if (bus_dmamem_alloc(sc->sc_dmatag,
|
|
MSK_STATUS_RING_CNT * sizeof(struct msk_status_desc),
|
|
PAGE_SIZE, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT)) {
|
|
aprint_error(": can't alloc status buffers\n");
|
|
goto fail_2;
|
|
}
|
|
|
|
if (bus_dmamem_map(sc->sc_dmatag, &seg, rseg,
|
|
MSK_STATUS_RING_CNT * sizeof(struct msk_status_desc),
|
|
&kva, BUS_DMA_NOWAIT)) {
|
|
aprint_error(": can't map dma buffers (%zu bytes)\n",
|
|
MSK_STATUS_RING_CNT * sizeof(struct msk_status_desc));
|
|
goto fail_3;
|
|
}
|
|
if (bus_dmamap_create(sc->sc_dmatag,
|
|
MSK_STATUS_RING_CNT * sizeof(struct msk_status_desc), 1,
|
|
MSK_STATUS_RING_CNT * sizeof(struct msk_status_desc), 0,
|
|
BUS_DMA_NOWAIT, &sc->sk_status_map)) {
|
|
aprint_error(": can't create dma map\n");
|
|
goto fail_4;
|
|
}
|
|
if (bus_dmamap_load(sc->sc_dmatag, sc->sk_status_map, kva,
|
|
MSK_STATUS_RING_CNT * sizeof(struct msk_status_desc),
|
|
NULL, BUS_DMA_NOWAIT)) {
|
|
aprint_error(": can't load dma map\n");
|
|
goto fail_5;
|
|
}
|
|
sc->sk_status_ring = (struct msk_status_desc *)kva;
|
|
|
|
/* Reset the adapter. */
|
|
msk_reset(sc);
|
|
|
|
skrs = sk_win_read_1(sc, SK_EPROM0);
|
|
if (skrs == 0x00)
|
|
sc->sk_ramsize = 0x20000;
|
|
else
|
|
sc->sk_ramsize = skrs * (1<<12);
|
|
sc->sk_rboff = SK_RBOFF_0;
|
|
|
|
DPRINTFN(2, ("mskc_attach: ramsize=%d (%dk), rboff=%d\n",
|
|
sc->sk_ramsize, sc->sk_ramsize / 1024,
|
|
sc->sk_rboff));
|
|
|
|
switch (sc->sk_type) {
|
|
case SK_YUKON_XL:
|
|
sc->sk_name = "Yukon-2 XL";
|
|
break;
|
|
case SK_YUKON_EC_U:
|
|
sc->sk_name = "Yukon-2 EC Ultra";
|
|
break;
|
|
case SK_YUKON_EC:
|
|
sc->sk_name = "Yukon-2 EC";
|
|
break;
|
|
case SK_YUKON_FE:
|
|
sc->sk_name = "Yukon-2 FE";
|
|
break;
|
|
default:
|
|
sc->sk_name = "Yukon (Unknown)";
|
|
}
|
|
|
|
if (sc->sk_type == SK_YUKON_XL) {
|
|
switch (sc->sk_rev) {
|
|
case SK_YUKON_XL_REV_A0:
|
|
sc->sk_workaround = 0;
|
|
revstr = "A0";
|
|
break;
|
|
case SK_YUKON_XL_REV_A1:
|
|
sc->sk_workaround = SK_WA_4109;
|
|
revstr = "A1";
|
|
break;
|
|
case SK_YUKON_XL_REV_A2:
|
|
sc->sk_workaround = SK_WA_4109;
|
|
revstr = "A2";
|
|
break;
|
|
case SK_YUKON_XL_REV_A3:
|
|
sc->sk_workaround = SK_WA_4109;
|
|
revstr = "A3";
|
|
break;
|
|
default:
|
|
sc->sk_workaround = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (sc->sk_type == SK_YUKON_EC) {
|
|
switch (sc->sk_rev) {
|
|
case SK_YUKON_EC_REV_A1:
|
|
sc->sk_workaround = SK_WA_43_418 | SK_WA_4109;
|
|
revstr = "A1";
|
|
break;
|
|
case SK_YUKON_EC_REV_A2:
|
|
sc->sk_workaround = SK_WA_4109;
|
|
revstr = "A2";
|
|
break;
|
|
case SK_YUKON_EC_REV_A3:
|
|
sc->sk_workaround = SK_WA_4109;
|
|
revstr = "A3";
|
|
break;
|
|
default:
|
|
sc->sk_workaround = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (sc->sk_type == SK_YUKON_FE) {
|
|
sc->sk_workaround = SK_WA_4109;
|
|
switch (sc->sk_rev) {
|
|
case SK_YUKON_FE_REV_A1:
|
|
revstr = "A1";
|
|
break;
|
|
case SK_YUKON_FE_REV_A2:
|
|
revstr = "A2";
|
|
break;
|
|
default:
|
|
sc->sk_workaround = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (sc->sk_type == SK_YUKON_EC_U) {
|
|
sc->sk_workaround = SK_WA_4109;
|
|
switch (sc->sk_rev) {
|
|
case SK_YUKON_EC_U_REV_A0:
|
|
revstr = "A0";
|
|
break;
|
|
case SK_YUKON_EC_U_REV_A1:
|
|
revstr = "A1";
|
|
break;
|
|
case SK_YUKON_EC_U_REV_B0:
|
|
revstr = "B0";
|
|
break;
|
|
default:
|
|
sc->sk_workaround = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Announce the product name. */
|
|
aprint_normal(", %s", sc->sk_name);
|
|
if (revstr != NULL)
|
|
aprint_normal(" rev. %s", revstr);
|
|
aprint_normal(" (0x%x): %s\n", sc->sk_rev, intrstr);
|
|
|
|
sc->sk_macs = 1;
|
|
|
|
hw = sk_win_read_1(sc, SK_Y2_HWRES);
|
|
if ((hw & SK_Y2_HWRES_LINK_MASK) == SK_Y2_HWRES_LINK_DUAL) {
|
|
if ((sk_win_read_1(sc, SK_Y2_CLKGATE) &
|
|
SK_Y2_CLKGATE_LINK2_INACTIVE) == 0)
|
|
sc->sk_macs++;
|
|
}
|
|
|
|
skca.skc_port = SK_PORT_A;
|
|
skca.skc_type = sc->sk_type;
|
|
skca.skc_rev = sc->sk_rev;
|
|
(void)config_found(&sc->sk_dev, &skca, mskcprint);
|
|
|
|
if (sc->sk_macs > 1) {
|
|
skca.skc_port = SK_PORT_B;
|
|
skca.skc_type = sc->sk_type;
|
|
skca.skc_rev = sc->sk_rev;
|
|
(void)config_found(&sc->sk_dev, &skca, mskcprint);
|
|
}
|
|
|
|
/* Turn on the 'driver is loaded' LED. */
|
|
CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_ON);
|
|
|
|
/* skc sysctl setup */
|
|
|
|
sc->sk_int_mod = SK_IM_DEFAULT;
|
|
sc->sk_int_mod_pending = 0;
|
|
|
|
if ((rc = sysctl_createv(&sc->sk_clog, 0, NULL, &node,
|
|
0, CTLTYPE_NODE, device_xname(&sc->sk_dev),
|
|
SYSCTL_DESCR("mskc per-controller controls"),
|
|
NULL, 0, NULL, 0, CTL_HW, msk_root_num, CTL_CREATE,
|
|
CTL_EOL)) != 0) {
|
|
aprint_normal_dev(&sc->sk_dev, "couldn't create sysctl node\n");
|
|
goto fail_6;
|
|
}
|
|
|
|
sk_nodenum = node->sysctl_num;
|
|
|
|
/* interrupt moderation time in usecs */
|
|
if ((rc = sysctl_createv(&sc->sk_clog, 0, NULL, &node,
|
|
CTLFLAG_READWRITE,
|
|
CTLTYPE_INT, "int_mod",
|
|
SYSCTL_DESCR("msk interrupt moderation timer"),
|
|
msk_sysctl_handler, 0, sc,
|
|
0, CTL_HW, msk_root_num, sk_nodenum, CTL_CREATE,
|
|
CTL_EOL)) != 0) {
|
|
aprint_normal_dev(&sc->sk_dev, "couldn't create int_mod sysctl node\n");
|
|
goto fail_6;
|
|
}
|
|
|
|
if (!pmf_device_register(self, mskc_suspend, mskc_resume))
|
|
aprint_error_dev(self, "couldn't establish power handler\n");
|
|
|
|
return;
|
|
|
|
fail_6:
|
|
bus_dmamap_unload(sc->sc_dmatag, sc->sk_status_map);
|
|
fail_5:
|
|
bus_dmamap_destroy(sc->sc_dmatag, sc->sk_status_map);
|
|
fail_4:
|
|
bus_dmamem_unmap(sc->sc_dmatag, kva,
|
|
MSK_STATUS_RING_CNT * sizeof(struct msk_status_desc));
|
|
fail_3:
|
|
bus_dmamem_free(sc->sc_dmatag, &seg, rseg);
|
|
fail_2:
|
|
pci_intr_disestablish(pc, sc->sk_intrhand);
|
|
fail_1:
|
|
bus_space_unmap(sc->sk_btag, sc->sk_bhandle, size);
|
|
}
|
|
|
|
int
|
|
msk_encap(struct sk_if_softc *sc_if, struct mbuf *m_head, u_int32_t *txidx)
|
|
{
|
|
struct sk_softc *sc = sc_if->sk_softc;
|
|
struct msk_tx_desc *f = NULL;
|
|
u_int32_t frag, cur;
|
|
int i;
|
|
struct sk_txmap_entry *entry;
|
|
bus_dmamap_t txmap;
|
|
|
|
DPRINTFN(2, ("msk_encap\n"));
|
|
|
|
entry = SIMPLEQ_FIRST(&sc_if->sk_txmap_head);
|
|
if (entry == NULL) {
|
|
DPRINTFN(2, ("msk_encap: no txmap available\n"));
|
|
return (ENOBUFS);
|
|
}
|
|
txmap = entry->dmamap;
|
|
|
|
cur = frag = *txidx;
|
|
|
|
#ifdef MSK_DEBUG
|
|
if (mskdebug >= 2)
|
|
msk_dump_mbuf(m_head);
|
|
#endif
|
|
|
|
/*
|
|
* Start packing the mbufs in this chain into
|
|
* the fragment pointers. Stop when we run out
|
|
* of fragments or hit the end of the mbuf chain.
|
|
*/
|
|
if (bus_dmamap_load_mbuf(sc->sc_dmatag, txmap, m_head,
|
|
BUS_DMA_NOWAIT)) {
|
|
DPRINTFN(2, ("msk_encap: dmamap failed\n"));
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
if (txmap->dm_nsegs > (MSK_TX_RING_CNT - sc_if->sk_cdata.sk_tx_cnt - 2)) {
|
|
DPRINTFN(2, ("msk_encap: too few descriptors free\n"));
|
|
bus_dmamap_unload(sc->sc_dmatag, txmap);
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
DPRINTFN(2, ("msk_encap: dm_nsegs=%d\n", txmap->dm_nsegs));
|
|
|
|
/* Sync the DMA map. */
|
|
bus_dmamap_sync(sc->sc_dmatag, txmap, 0, txmap->dm_mapsize,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
for (i = 0; i < txmap->dm_nsegs; i++) {
|
|
f = &sc_if->sk_rdata->sk_tx_ring[frag];
|
|
f->sk_addr = htole32(txmap->dm_segs[i].ds_addr);
|
|
f->sk_len = htole16(txmap->dm_segs[i].ds_len);
|
|
f->sk_ctl = 0;
|
|
if (i == 0)
|
|
f->sk_opcode = SK_Y2_TXOPC_PACKET;
|
|
else
|
|
f->sk_opcode = SK_Y2_TXOPC_BUFFER | SK_Y2_TXOPC_OWN;
|
|
cur = frag;
|
|
SK_INC(frag, MSK_TX_RING_CNT);
|
|
}
|
|
|
|
sc_if->sk_cdata.sk_tx_chain[cur].sk_mbuf = m_head;
|
|
SIMPLEQ_REMOVE_HEAD(&sc_if->sk_txmap_head, link);
|
|
|
|
sc_if->sk_cdata.sk_tx_map[cur] = entry;
|
|
sc_if->sk_rdata->sk_tx_ring[cur].sk_ctl |= SK_Y2_TXCTL_LASTFRAG;
|
|
|
|
/* Sync descriptors before handing to chip */
|
|
MSK_CDTXSYNC(sc_if, *txidx, txmap->dm_nsegs,
|
|
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
|
|
|
|
sc_if->sk_rdata->sk_tx_ring[*txidx].sk_opcode |= SK_Y2_TXOPC_OWN;
|
|
|
|
/* Sync first descriptor to hand it off */
|
|
MSK_CDTXSYNC(sc_if, *txidx, 1,
|
|
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
|
|
|
|
sc_if->sk_cdata.sk_tx_cnt += txmap->dm_nsegs;
|
|
|
|
#ifdef MSK_DEBUG
|
|
if (mskdebug >= 2) {
|
|
struct msk_tx_desc *le;
|
|
u_int32_t idx;
|
|
for (idx = *txidx; idx != frag; SK_INC(idx, MSK_TX_RING_CNT)) {
|
|
le = &sc_if->sk_rdata->sk_tx_ring[idx];
|
|
msk_dump_txdesc(le, idx);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
*txidx = frag;
|
|
|
|
DPRINTFN(2, ("msk_encap: completed successfully\n"));
|
|
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
msk_start(struct ifnet *ifp)
|
|
{
|
|
struct sk_if_softc *sc_if = ifp->if_softc;
|
|
struct mbuf *m_head = NULL;
|
|
u_int32_t idx = sc_if->sk_cdata.sk_tx_prod;
|
|
int pkts = 0;
|
|
|
|
DPRINTFN(2, ("msk_start\n"));
|
|
|
|
while (sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf == NULL) {
|
|
IFQ_POLL(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
/*
|
|
* Pack the data into the transmit ring. If we
|
|
* don't have room, set the OACTIVE flag and wait
|
|
* for the NIC to drain the ring.
|
|
*/
|
|
if (msk_encap(sc_if, m_head, &idx)) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
break;
|
|
}
|
|
|
|
/* now we are committed to transmit the packet */
|
|
IFQ_DEQUEUE(&ifp->if_snd, m_head);
|
|
pkts++;
|
|
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
#if NBPFILTER > 0
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp->if_bpf, m_head);
|
|
#endif
|
|
}
|
|
if (pkts == 0)
|
|
return;
|
|
|
|
/* Transmit */
|
|
if (idx != sc_if->sk_cdata.sk_tx_prod) {
|
|
sc_if->sk_cdata.sk_tx_prod = idx;
|
|
SK_IF_WRITE_2(sc_if, 1, SK_TXQA1_Y2_PREF_PUTIDX, idx);
|
|
|
|
/* Set a timeout in case the chip goes out to lunch. */
|
|
ifp->if_timer = 5;
|
|
}
|
|
}
|
|
|
|
void
|
|
msk_watchdog(struct ifnet *ifp)
|
|
{
|
|
struct sk_if_softc *sc_if = ifp->if_softc;
|
|
u_int32_t reg;
|
|
int idx;
|
|
|
|
/*
|
|
* Reclaim first as there is a possibility of losing Tx completion
|
|
* interrupts.
|
|
*/
|
|
if (sc_if->sk_port == SK_PORT_A)
|
|
reg = SK_STAT_BMU_TXA1_RIDX;
|
|
else
|
|
reg = SK_STAT_BMU_TXA2_RIDX;
|
|
|
|
idx = sk_win_read_2(sc_if->sk_softc, reg);
|
|
if (sc_if->sk_cdata.sk_tx_cons != idx) {
|
|
msk_txeof(sc_if, idx);
|
|
if (sc_if->sk_cdata.sk_tx_cnt != 0) {
|
|
aprint_error_dev(&sc_if->sk_dev, "watchdog timeout\n");
|
|
|
|
ifp->if_oerrors++;
|
|
|
|
/* XXX Resets both ports; we shouldn't do that. */
|
|
msk_reset(sc_if->sk_softc);
|
|
msk_init(ifp);
|
|
}
|
|
}
|
|
}
|
|
|
|
static bool
|
|
mskc_suspend(device_t dv PMF_FN_ARGS)
|
|
{
|
|
struct sk_softc *sc = device_private(dv);
|
|
|
|
DPRINTFN(2, ("mskc_suspend\n"));
|
|
|
|
/* Turn off the 'driver is loaded' LED. */
|
|
CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_OFF);
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool
|
|
mskc_resume(device_t dv PMF_FN_ARGS)
|
|
{
|
|
struct sk_softc *sc = device_private(dv);
|
|
|
|
DPRINTFN(2, ("mskc_resume\n"));
|
|
|
|
msk_reset(sc);
|
|
CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_ON);
|
|
|
|
return true;
|
|
}
|
|
|
|
__inline int
|
|
msk_rxvalid(struct sk_softc *sc, u_int32_t stat, u_int32_t len)
|
|
{
|
|
if ((stat & (YU_RXSTAT_CRCERR | YU_RXSTAT_LONGERR |
|
|
YU_RXSTAT_MIIERR | YU_RXSTAT_BADFC | YU_RXSTAT_GOODFC |
|
|
YU_RXSTAT_JABBER)) != 0 ||
|
|
(stat & YU_RXSTAT_RXOK) != YU_RXSTAT_RXOK ||
|
|
YU_RXSTAT_BYTES(stat) != len)
|
|
return (0);
|
|
|
|
return (1);
|
|
}
|
|
|
|
void
|
|
msk_rxeof(struct sk_if_softc *sc_if, u_int16_t len, u_int32_t rxstat)
|
|
{
|
|
struct sk_softc *sc = sc_if->sk_softc;
|
|
struct ifnet *ifp = &sc_if->sk_ethercom.ec_if;
|
|
struct mbuf *m;
|
|
struct sk_chain *cur_rx;
|
|
int cur, total_len = len;
|
|
bus_dmamap_t dmamap;
|
|
|
|
DPRINTFN(2, ("msk_rxeof\n"));
|
|
|
|
cur = sc_if->sk_cdata.sk_rx_cons;
|
|
SK_INC(sc_if->sk_cdata.sk_rx_cons, MSK_RX_RING_CNT);
|
|
SK_INC(sc_if->sk_cdata.sk_rx_prod, MSK_RX_RING_CNT);
|
|
|
|
/* Sync the descriptor */
|
|
MSK_CDRXSYNC(sc_if, cur, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
|
|
|
|
cur_rx = &sc_if->sk_cdata.sk_rx_chain[cur];
|
|
dmamap = sc_if->sk_cdata.sk_rx_jumbo_map;
|
|
|
|
bus_dmamap_sync(sc_if->sk_softc->sc_dmatag, dmamap, 0,
|
|
dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD);
|
|
|
|
m = cur_rx->sk_mbuf;
|
|
cur_rx->sk_mbuf = NULL;
|
|
|
|
if (total_len < SK_MIN_FRAMELEN ||
|
|
total_len > ETHER_MAX_LEN_JUMBO ||
|
|
msk_rxvalid(sc, rxstat, total_len) == 0) {
|
|
ifp->if_ierrors++;
|
|
msk_newbuf(sc_if, cur, m, dmamap);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Try to allocate a new jumbo buffer. If that fails, copy the
|
|
* packet to mbufs and put the jumbo buffer back in the ring
|
|
* so it can be re-used. If allocating mbufs fails, then we
|
|
* have to drop the packet.
|
|
*/
|
|
if (msk_newbuf(sc_if, cur, NULL, dmamap) == ENOBUFS) {
|
|
struct mbuf *m0;
|
|
m0 = m_devget(mtod(m, char *) - ETHER_ALIGN,
|
|
total_len + ETHER_ALIGN, 0, ifp, NULL);
|
|
msk_newbuf(sc_if, cur, m, dmamap);
|
|
if (m0 == NULL) {
|
|
ifp->if_ierrors++;
|
|
return;
|
|
}
|
|
m_adj(m0, ETHER_ALIGN);
|
|
m = m0;
|
|
} else {
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = m->m_len = total_len;
|
|
}
|
|
|
|
ifp->if_ipackets++;
|
|
|
|
#if NBPFILTER > 0
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp->if_bpf, m);
|
|
#endif
|
|
|
|
/* pass it on. */
|
|
(*ifp->if_input)(ifp, m);
|
|
}
|
|
|
|
void
|
|
msk_txeof(struct sk_if_softc *sc_if, int idx)
|
|
{
|
|
struct sk_softc *sc = sc_if->sk_softc;
|
|
struct msk_tx_desc *cur_tx;
|
|
struct ifnet *ifp = &sc_if->sk_ethercom.ec_if;
|
|
u_int32_t sk_ctl;
|
|
struct sk_txmap_entry *entry;
|
|
int cons, prog;
|
|
|
|
DPRINTFN(2, ("msk_txeof\n"));
|
|
|
|
/*
|
|
* Go through our tx ring and free mbufs for those
|
|
* frames that have been sent.
|
|
*/
|
|
cons = sc_if->sk_cdata.sk_tx_cons;
|
|
prog = 0;
|
|
while (cons != idx) {
|
|
if (sc_if->sk_cdata.sk_tx_cnt <= 0)
|
|
break;
|
|
prog++;
|
|
cur_tx = &sc_if->sk_rdata->sk_tx_ring[cons];
|
|
|
|
MSK_CDTXSYNC(sc_if, cons, 1,
|
|
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
|
|
sk_ctl = cur_tx->sk_ctl;
|
|
MSK_CDTXSYNC(sc_if, cons, 1, BUS_DMASYNC_PREREAD);
|
|
#ifdef MSK_DEBUG
|
|
if (mskdebug >= 2)
|
|
msk_dump_txdesc(cur_tx, cons);
|
|
#endif
|
|
if (sk_ctl & SK_Y2_TXCTL_LASTFRAG)
|
|
ifp->if_opackets++;
|
|
if (sc_if->sk_cdata.sk_tx_chain[cons].sk_mbuf != NULL) {
|
|
entry = sc_if->sk_cdata.sk_tx_map[cons];
|
|
|
|
bus_dmamap_sync(sc->sc_dmatag, entry->dmamap, 0,
|
|
entry->dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE);
|
|
|
|
bus_dmamap_unload(sc->sc_dmatag, entry->dmamap);
|
|
SIMPLEQ_INSERT_TAIL(&sc_if->sk_txmap_head, entry,
|
|
link);
|
|
sc_if->sk_cdata.sk_tx_map[cons] = NULL;
|
|
m_freem(sc_if->sk_cdata.sk_tx_chain[cons].sk_mbuf);
|
|
sc_if->sk_cdata.sk_tx_chain[cons].sk_mbuf = NULL;
|
|
}
|
|
sc_if->sk_cdata.sk_tx_cnt--;
|
|
SK_INC(cons, MSK_TX_RING_CNT);
|
|
}
|
|
ifp->if_timer = sc_if->sk_cdata.sk_tx_cnt > 0 ? 5 : 0;
|
|
|
|
if (sc_if->sk_cdata.sk_tx_cnt < MSK_TX_RING_CNT - 2)
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
if (prog > 0)
|
|
sc_if->sk_cdata.sk_tx_cons = cons;
|
|
}
|
|
|
|
void
|
|
msk_tick(void *xsc_if)
|
|
{
|
|
struct sk_if_softc *sc_if = xsc_if;
|
|
struct mii_data *mii = &sc_if->sk_mii;
|
|
int s;
|
|
|
|
s = splnet();
|
|
mii_tick(mii);
|
|
splx(s);
|
|
|
|
callout_schedule(&sc_if->sk_tick_ch, hz);
|
|
}
|
|
|
|
void
|
|
msk_intr_yukon(struct sk_if_softc *sc_if)
|
|
{
|
|
u_int8_t status;
|
|
|
|
status = SK_IF_READ_1(sc_if, 0, SK_GMAC_ISR);
|
|
/* RX overrun */
|
|
if ((status & SK_GMAC_INT_RX_OVER) != 0) {
|
|
SK_IF_WRITE_1(sc_if, 0, SK_RXMF1_CTRL_TEST,
|
|
SK_RFCTL_RX_FIFO_OVER);
|
|
}
|
|
/* TX underrun */
|
|
if ((status & SK_GMAC_INT_TX_UNDER) != 0) {
|
|
SK_IF_WRITE_1(sc_if, 0, SK_TXMF1_CTRL_TEST,
|
|
SK_TFCTL_TX_FIFO_UNDER);
|
|
}
|
|
|
|
DPRINTFN(2, ("msk_intr_yukon status=%#x\n", status));
|
|
}
|
|
|
|
int
|
|
msk_intr(void *xsc)
|
|
{
|
|
struct sk_softc *sc = xsc;
|
|
struct sk_if_softc *sc_if0 = sc->sk_if[SK_PORT_A];
|
|
struct sk_if_softc *sc_if1 = sc->sk_if[SK_PORT_B];
|
|
struct ifnet *ifp0 = NULL, *ifp1 = NULL;
|
|
int claimed = 0;
|
|
u_int32_t status;
|
|
uint32_t st_status;
|
|
uint16_t st_len;
|
|
uint8_t st_opcode, st_link;
|
|
struct msk_status_desc *cur_st;
|
|
|
|
status = CSR_READ_4(sc, SK_Y2_ISSR2);
|
|
if (status == 0) {
|
|
CSR_WRITE_4(sc, SK_Y2_ICR, 2);
|
|
return (0);
|
|
}
|
|
|
|
status = CSR_READ_4(sc, SK_ISR);
|
|
|
|
if (sc_if0 != NULL)
|
|
ifp0 = &sc_if0->sk_ethercom.ec_if;
|
|
if (sc_if1 != NULL)
|
|
ifp1 = &sc_if1->sk_ethercom.ec_if;
|
|
|
|
if (sc_if0 && (status & SK_Y2_IMR_MAC1) &&
|
|
(ifp0->if_flags & IFF_RUNNING)) {
|
|
msk_intr_yukon(sc_if0);
|
|
}
|
|
|
|
if (sc_if1 && (status & SK_Y2_IMR_MAC2) &&
|
|
(ifp1->if_flags & IFF_RUNNING)) {
|
|
msk_intr_yukon(sc_if1);
|
|
}
|
|
|
|
for (;;) {
|
|
cur_st = &sc->sk_status_ring[sc->sk_status_idx];
|
|
MSK_CDSTSYNC(sc, sc->sk_status_idx,
|
|
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
|
|
st_opcode = cur_st->sk_opcode;
|
|
if ((st_opcode & SK_Y2_STOPC_OWN) == 0) {
|
|
MSK_CDSTSYNC(sc, sc->sk_status_idx,
|
|
BUS_DMASYNC_PREREAD);
|
|
break;
|
|
}
|
|
st_status = le32toh(cur_st->sk_status);
|
|
st_len = le16toh(cur_st->sk_len);
|
|
st_link = cur_st->sk_link;
|
|
st_opcode &= ~SK_Y2_STOPC_OWN;
|
|
|
|
switch (st_opcode) {
|
|
case SK_Y2_STOPC_RXSTAT:
|
|
msk_rxeof(sc->sk_if[st_link], st_len, st_status);
|
|
SK_IF_WRITE_2(sc->sk_if[st_link], 0,
|
|
SK_RXQ1_Y2_PREF_PUTIDX,
|
|
sc->sk_if[st_link]->sk_cdata.sk_rx_prod);
|
|
break;
|
|
case SK_Y2_STOPC_TXSTAT:
|
|
if (sc_if0)
|
|
msk_txeof(sc_if0, st_status
|
|
& SK_Y2_ST_TXA1_MSKL);
|
|
if (sc_if1)
|
|
msk_txeof(sc_if1,
|
|
((st_status & SK_Y2_ST_TXA2_MSKL)
|
|
>> SK_Y2_ST_TXA2_SHIFTL)
|
|
| ((st_len & SK_Y2_ST_TXA2_MSKH) << SK_Y2_ST_TXA2_SHIFTH));
|
|
break;
|
|
default:
|
|
aprint_error("opcode=0x%x\n", st_opcode);
|
|
break;
|
|
}
|
|
SK_INC(sc->sk_status_idx, MSK_STATUS_RING_CNT);
|
|
}
|
|
|
|
#define MSK_STATUS_RING_OWN_CNT(sc) \
|
|
(((sc)->sk_status_idx + MSK_STATUS_RING_CNT - \
|
|
(sc)->sk_status_own_idx) % MSK_STATUS_RING_CNT)
|
|
|
|
while (MSK_STATUS_RING_OWN_CNT(sc) > MSK_STATUS_RING_CNT / 2) {
|
|
cur_st = &sc->sk_status_ring[sc->sk_status_own_idx];
|
|
cur_st->sk_opcode &= ~SK_Y2_STOPC_OWN;
|
|
MSK_CDSTSYNC(sc, sc->sk_status_own_idx,
|
|
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
|
|
|
|
SK_INC(sc->sk_status_own_idx, MSK_STATUS_RING_CNT);
|
|
}
|
|
|
|
if (status & SK_Y2_IMR_BMU) {
|
|
CSR_WRITE_4(sc, SK_STAT_BMU_CSR, SK_STAT_BMU_IRQ_CLEAR);
|
|
claimed = 1;
|
|
}
|
|
|
|
CSR_WRITE_4(sc, SK_Y2_ICR, 2);
|
|
|
|
if (ifp0 != NULL && !IFQ_IS_EMPTY(&ifp0->if_snd))
|
|
msk_start(ifp0);
|
|
if (ifp1 != NULL && !IFQ_IS_EMPTY(&ifp1->if_snd))
|
|
msk_start(ifp1);
|
|
|
|
#if NRND > 0
|
|
if (RND_ENABLED(&sc->rnd_source))
|
|
rnd_add_uint32(&sc->rnd_source, status);
|
|
#endif
|
|
|
|
if (sc->sk_int_mod_pending)
|
|
msk_update_int_mod(sc);
|
|
|
|
return claimed;
|
|
}
|
|
|
|
void
|
|
msk_init_yukon(struct sk_if_softc *sc_if)
|
|
{
|
|
u_int32_t v;
|
|
u_int16_t reg;
|
|
struct sk_softc *sc;
|
|
int i;
|
|
|
|
sc = sc_if->sk_softc;
|
|
|
|
DPRINTFN(2, ("msk_init_yukon: start: sk_csr=%#x\n",
|
|
CSR_READ_4(sc_if->sk_softc, SK_CSR)));
|
|
|
|
DPRINTFN(6, ("msk_init_yukon: 1\n"));
|
|
|
|
/* GMAC and GPHY Reset */
|
|
SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_SET);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, SK_GPHY_RESET_SET);
|
|
DELAY(1000);
|
|
|
|
DPRINTFN(6, ("msk_init_yukon: 2\n"));
|
|
|
|
SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, SK_GPHY_RESET_CLEAR);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_LOOP_OFF |
|
|
SK_GMAC_PAUSE_ON | SK_GMAC_RESET_CLEAR);
|
|
|
|
DPRINTFN(3, ("msk_init_yukon: gmac_ctrl=%#x\n",
|
|
SK_IF_READ_4(sc_if, 0, SK_GMAC_CTRL)));
|
|
|
|
DPRINTFN(6, ("msk_init_yukon: 3\n"));
|
|
|
|
/* unused read of the interrupt source register */
|
|
DPRINTFN(6, ("msk_init_yukon: 4\n"));
|
|
SK_IF_READ_2(sc_if, 0, SK_GMAC_ISR);
|
|
|
|
DPRINTFN(6, ("msk_init_yukon: 4a\n"));
|
|
reg = SK_YU_READ_2(sc_if, YUKON_PAR);
|
|
DPRINTFN(6, ("msk_init_yukon: YUKON_PAR=%#x\n", reg));
|
|
|
|
/* MIB Counter Clear Mode set */
|
|
reg |= YU_PAR_MIB_CLR;
|
|
DPRINTFN(6, ("msk_init_yukon: YUKON_PAR=%#x\n", reg));
|
|
DPRINTFN(6, ("msk_init_yukon: 4b\n"));
|
|
SK_YU_WRITE_2(sc_if, YUKON_PAR, reg);
|
|
|
|
/* MIB Counter Clear Mode clear */
|
|
DPRINTFN(6, ("msk_init_yukon: 5\n"));
|
|
reg &= ~YU_PAR_MIB_CLR;
|
|
SK_YU_WRITE_2(sc_if, YUKON_PAR, reg);
|
|
|
|
/* receive control reg */
|
|
DPRINTFN(6, ("msk_init_yukon: 7\n"));
|
|
SK_YU_WRITE_2(sc_if, YUKON_RCR, YU_RCR_CRCR);
|
|
|
|
/* transmit control register */
|
|
SK_YU_WRITE_2(sc_if, YUKON_TCR, (0x04 << 10));
|
|
|
|
/* transmit flow control register */
|
|
SK_YU_WRITE_2(sc_if, YUKON_TFCR, 0xffff);
|
|
|
|
/* transmit parameter register */
|
|
DPRINTFN(6, ("msk_init_yukon: 8\n"));
|
|
SK_YU_WRITE_2(sc_if, YUKON_TPR, YU_TPR_JAM_LEN(0x3) |
|
|
YU_TPR_JAM_IPG(0xb) | YU_TPR_JAM2DATA_IPG(0x1c) | 0x04);
|
|
|
|
/* serial mode register */
|
|
DPRINTFN(6, ("msk_init_yukon: 9\n"));
|
|
reg = YU_SMR_DATA_BLIND(0x1c) |
|
|
YU_SMR_MFL_VLAN |
|
|
YU_SMR_IPG_DATA(0x1e);
|
|
|
|
if (sc->sk_type != SK_YUKON_FE)
|
|
reg |= YU_SMR_MFL_JUMBO;
|
|
|
|
SK_YU_WRITE_2(sc_if, YUKON_SMR, reg);
|
|
|
|
DPRINTFN(6, ("msk_init_yukon: 10\n"));
|
|
/* Setup Yukon's address */
|
|
for (i = 0; i < 3; i++) {
|
|
/* Write Source Address 1 (unicast filter) */
|
|
SK_YU_WRITE_2(sc_if, YUKON_SAL1 + i * 4,
|
|
sc_if->sk_enaddr[i * 2] |
|
|
sc_if->sk_enaddr[i * 2 + 1] << 8);
|
|
}
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
reg = sk_win_read_2(sc_if->sk_softc,
|
|
SK_MAC1_0 + i * 2 + sc_if->sk_port * 8);
|
|
SK_YU_WRITE_2(sc_if, YUKON_SAL2 + i * 4, reg);
|
|
}
|
|
|
|
/* Set promiscuous mode */
|
|
msk_setpromisc(sc_if);
|
|
|
|
/* Set multicast filter */
|
|
DPRINTFN(6, ("msk_init_yukon: 11\n"));
|
|
msk_setmulti(sc_if);
|
|
|
|
/* enable interrupt mask for counter overflows */
|
|
DPRINTFN(6, ("msk_init_yukon: 12\n"));
|
|
SK_YU_WRITE_2(sc_if, YUKON_TIMR, 0);
|
|
SK_YU_WRITE_2(sc_if, YUKON_RIMR, 0);
|
|
SK_YU_WRITE_2(sc_if, YUKON_TRIMR, 0);
|
|
|
|
/* Configure RX MAC FIFO Flush Mask */
|
|
v = YU_RXSTAT_FOFL | YU_RXSTAT_CRCERR | YU_RXSTAT_MIIERR |
|
|
YU_RXSTAT_BADFC | YU_RXSTAT_GOODFC | YU_RXSTAT_RUNT |
|
|
YU_RXSTAT_JABBER;
|
|
SK_IF_WRITE_2(sc_if, 0, SK_RXMF1_FLUSH_MASK, v);
|
|
|
|
/* Configure RX MAC FIFO */
|
|
SK_IF_WRITE_1(sc_if, 0, SK_RXMF1_CTRL_TEST, SK_RFCTL_RESET_CLEAR);
|
|
SK_IF_WRITE_2(sc_if, 0, SK_RXMF1_CTRL_TEST, SK_RFCTL_OPERATION_ON |
|
|
SK_RFCTL_FIFO_FLUSH_ON);
|
|
|
|
/* Increase flush threshould to 64 bytes */
|
|
SK_IF_WRITE_2(sc_if, 0, SK_RXMF1_FLUSH_THRESHOLD,
|
|
SK_RFCTL_FIFO_THRESHOLD + 1);
|
|
|
|
/* Configure TX MAC FIFO */
|
|
SK_IF_WRITE_1(sc_if, 0, SK_TXMF1_CTRL_TEST, SK_TFCTL_RESET_CLEAR);
|
|
SK_IF_WRITE_2(sc_if, 0, SK_TXMF1_CTRL_TEST, SK_TFCTL_OPERATION_ON);
|
|
|
|
#if 1
|
|
SK_YU_WRITE_2(sc_if, YUKON_GPCR, YU_GPCR_TXEN | YU_GPCR_RXEN);
|
|
#endif
|
|
DPRINTFN(6, ("msk_init_yukon: end\n"));
|
|
}
|
|
|
|
/*
|
|
* Note that to properly initialize any part of the GEnesis chip,
|
|
* you first have to take it out of reset mode.
|
|
*/
|
|
int
|
|
msk_init(struct ifnet *ifp)
|
|
{
|
|
struct sk_if_softc *sc_if = ifp->if_softc;
|
|
struct sk_softc *sc = sc_if->sk_softc;
|
|
int rc = 0, s;
|
|
uint32_t imr, imtimer_ticks;
|
|
|
|
|
|
DPRINTFN(2, ("msk_init\n"));
|
|
|
|
s = splnet();
|
|
|
|
/* Cancel pending I/O and free all RX/TX buffers. */
|
|
msk_stop(ifp,0);
|
|
|
|
/* Configure I2C registers */
|
|
|
|
/* Configure XMAC(s) */
|
|
msk_init_yukon(sc_if);
|
|
if ((rc = ether_mediachange(ifp)) != 0)
|
|
goto out;
|
|
|
|
/* Configure transmit arbiter(s) */
|
|
SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL, SK_TXARCTL_ON);
|
|
#if 0
|
|
SK_TXARCTL_ON|SK_TXARCTL_FSYNC_ON);
|
|
#endif
|
|
|
|
/* Configure RAMbuffers */
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_UNRESET);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_START, sc_if->sk_rx_ramstart);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_WR_PTR, sc_if->sk_rx_ramstart);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_RD_PTR, sc_if->sk_rx_ramstart);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_END, sc_if->sk_rx_ramend);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_ON);
|
|
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXRBA1_CTLTST, SK_RBCTL_UNRESET);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXRBA1_CTLTST, SK_RBCTL_STORENFWD_ON);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXRBA1_START, sc_if->sk_tx_ramstart);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXRBA1_WR_PTR, sc_if->sk_tx_ramstart);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXRBA1_RD_PTR, sc_if->sk_tx_ramstart);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXRBA1_END, sc_if->sk_tx_ramend);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXRBA1_CTLTST, SK_RBCTL_ON);
|
|
|
|
/* Configure BMUs */
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, 0x00000016);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, 0x00000d28);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, 0x00000080);
|
|
SK_IF_WRITE_2(sc_if, 0, SK_RXQ1_Y2_WM, 0x0600); /* XXX ??? */
|
|
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXQA1_BMU_CSR, 0x00000016);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXQA1_BMU_CSR, 0x00000d28);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXQA1_BMU_CSR, 0x00000080);
|
|
SK_IF_WRITE_2(sc_if, 1, SK_TXQA1_Y2_WM, 0x0600); /* XXX ??? */
|
|
|
|
/* Make sure the sync transmit queue is disabled. */
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_RESET);
|
|
|
|
/* Init descriptors */
|
|
if (msk_init_rx_ring(sc_if) == ENOBUFS) {
|
|
aprint_error_dev(&sc_if->sk_dev, "initialization failed: no "
|
|
"memory for rx buffers\n");
|
|
msk_stop(ifp,0);
|
|
splx(s);
|
|
return ENOBUFS;
|
|
}
|
|
|
|
if (msk_init_tx_ring(sc_if) == ENOBUFS) {
|
|
aprint_error_dev(&sc_if->sk_dev, "initialization failed: no "
|
|
"memory for tx buffers\n");
|
|
msk_stop(ifp,0);
|
|
splx(s);
|
|
return ENOBUFS;
|
|
}
|
|
|
|
/* Set interrupt moderation if changed via sysctl. */
|
|
switch (sc->sk_type) {
|
|
case SK_YUKON_EC:
|
|
case SK_YUKON_EC_U:
|
|
imtimer_ticks = SK_IMTIMER_TICKS_YUKON_EC;
|
|
break;
|
|
case SK_YUKON_FE:
|
|
imtimer_ticks = SK_IMTIMER_TICKS_YUKON_FE;
|
|
break;
|
|
case SK_YUKON_XL:
|
|
imtimer_ticks = SK_IMTIMER_TICKS_YUKON_XL;
|
|
break;
|
|
default:
|
|
imtimer_ticks = SK_IMTIMER_TICKS_YUKON;
|
|
}
|
|
imr = sk_win_read_4(sc, SK_IMTIMERINIT);
|
|
if (imr != SK_IM_USECS(sc->sk_int_mod)) {
|
|
sk_win_write_4(sc, SK_IMTIMERINIT,
|
|
SK_IM_USECS(sc->sk_int_mod));
|
|
aprint_verbose_dev(&sc->sk_dev, "interrupt moderation is %d us\n",
|
|
sc->sk_int_mod);
|
|
}
|
|
|
|
/* Initialize prefetch engine. */
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_Y2_PREF_CSR, 0x00000001);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_Y2_PREF_CSR, 0x00000002);
|
|
SK_IF_WRITE_2(sc_if, 0, SK_RXQ1_Y2_PREF_LIDX, MSK_RX_RING_CNT - 1);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_Y2_PREF_ADDRLO,
|
|
MSK_RX_RING_ADDR(sc_if, 0));
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_Y2_PREF_ADDRHI,
|
|
(u_int64_t)MSK_RX_RING_ADDR(sc_if, 0) >> 32);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_Y2_PREF_CSR, 0x00000008);
|
|
SK_IF_READ_4(sc_if, 0, SK_RXQ1_Y2_PREF_CSR);
|
|
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXQA1_Y2_PREF_CSR, 0x00000001);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXQA1_Y2_PREF_CSR, 0x00000002);
|
|
SK_IF_WRITE_2(sc_if, 1, SK_TXQA1_Y2_PREF_LIDX, MSK_TX_RING_CNT - 1);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXQA1_Y2_PREF_ADDRLO,
|
|
MSK_TX_RING_ADDR(sc_if, 0));
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXQA1_Y2_PREF_ADDRHI,
|
|
(u_int64_t)MSK_TX_RING_ADDR(sc_if, 0) >> 32);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXQA1_Y2_PREF_CSR, 0x00000008);
|
|
SK_IF_READ_4(sc_if, 1, SK_TXQA1_Y2_PREF_CSR);
|
|
|
|
SK_IF_WRITE_2(sc_if, 0, SK_RXQ1_Y2_PREF_PUTIDX,
|
|
sc_if->sk_cdata.sk_rx_prod);
|
|
|
|
/* Configure interrupt handling */
|
|
if (sc_if->sk_port == SK_PORT_A)
|
|
sc->sk_intrmask |= SK_Y2_INTRS1;
|
|
else
|
|
sc->sk_intrmask |= SK_Y2_INTRS2;
|
|
sc->sk_intrmask |= SK_Y2_IMR_BMU;
|
|
CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask);
|
|
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
callout_schedule(&sc_if->sk_tick_ch, hz);
|
|
|
|
out:
|
|
splx(s);
|
|
return rc;
|
|
}
|
|
|
|
void
|
|
msk_stop(struct ifnet *ifp, int disable)
|
|
{
|
|
struct sk_if_softc *sc_if = ifp->if_softc;
|
|
struct sk_softc *sc = sc_if->sk_softc;
|
|
struct sk_txmap_entry *dma;
|
|
int i;
|
|
|
|
DPRINTFN(2, ("msk_stop\n"));
|
|
|
|
callout_stop(&sc_if->sk_tick_ch);
|
|
|
|
ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE);
|
|
|
|
/* Stop transfer of Tx descriptors */
|
|
|
|
/* Stop transfer of Rx descriptors */
|
|
|
|
/* Turn off various components of this interface. */
|
|
SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC);
|
|
SK_IF_WRITE_1(sc_if,0, SK_RXMF1_CTRL_TEST, SK_RFCTL_RESET_SET);
|
|
SK_IF_WRITE_1(sc_if,0, SK_TXMF1_CTRL_TEST, SK_TFCTL_RESET_SET);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_OFFLINE);
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXQA1_BMU_CSR, SK_TXBMU_OFFLINE);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXRBA1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF);
|
|
SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL, SK_TXARCTL_OFF);
|
|
SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP);
|
|
SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL, SK_TXLEDCTL_COUNTER_STOP);
|
|
SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_OFF);
|
|
SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_LINKSYNC_OFF);
|
|
|
|
SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_Y2_PREF_CSR, 0x00000001);
|
|
SK_IF_WRITE_4(sc_if, 1, SK_TXQA1_Y2_PREF_CSR, 0x00000001);
|
|
|
|
/* Disable interrupts */
|
|
if (sc_if->sk_port == SK_PORT_A)
|
|
sc->sk_intrmask &= ~SK_Y2_INTRS1;
|
|
else
|
|
sc->sk_intrmask &= ~SK_Y2_INTRS2;
|
|
CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask);
|
|
|
|
SK_XM_READ_2(sc_if, XM_ISR);
|
|
SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF);
|
|
|
|
/* Free RX and TX mbufs still in the queues. */
|
|
for (i = 0; i < MSK_RX_RING_CNT; i++) {
|
|
if (sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf != NULL) {
|
|
m_freem(sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf);
|
|
sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf = NULL;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < MSK_TX_RING_CNT; i++) {
|
|
if (sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf != NULL) {
|
|
m_freem(sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf);
|
|
sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf = NULL;
|
|
#if 1
|
|
SIMPLEQ_INSERT_HEAD(&sc_if->sk_txmap_head,
|
|
sc_if->sk_cdata.sk_tx_map[i], link);
|
|
sc_if->sk_cdata.sk_tx_map[i] = 0;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#if 1
|
|
while ((dma = SIMPLEQ_FIRST(&sc_if->sk_txmap_head))) {
|
|
SIMPLEQ_REMOVE_HEAD(&sc_if->sk_txmap_head, link);
|
|
bus_dmamap_destroy(sc->sc_dmatag, dma->dmamap);
|
|
free(dma, M_DEVBUF);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
CFATTACH_DECL(mskc, sizeof(struct sk_softc), mskc_probe, mskc_attach,
|
|
NULL, NULL);
|
|
|
|
CFATTACH_DECL(msk, sizeof(struct sk_if_softc), msk_probe, msk_attach,
|
|
NULL, NULL);
|
|
|
|
#ifdef MSK_DEBUG
|
|
void
|
|
msk_dump_txdesc(struct msk_tx_desc *le, int idx)
|
|
{
|
|
#define DESC_PRINT(X) \
|
|
if (X) \
|
|
printf("txdesc[%d]." #X "=%#x\n", \
|
|
idx, X);
|
|
|
|
DESC_PRINT(letoh32(le->sk_addr));
|
|
DESC_PRINT(letoh16(le->sk_len));
|
|
DESC_PRINT(le->sk_ctl);
|
|
DESC_PRINT(le->sk_opcode);
|
|
#undef DESC_PRINT
|
|
}
|
|
|
|
void
|
|
msk_dump_bytes(const char *data, int len)
|
|
{
|
|
int c, i, j;
|
|
|
|
for (i = 0; i < len; i += 16) {
|
|
printf("%08x ", i);
|
|
c = len - i;
|
|
if (c > 16) c = 16;
|
|
|
|
for (j = 0; j < c; j++) {
|
|
printf("%02x ", data[i + j] & 0xff);
|
|
if ((j & 0xf) == 7 && j > 0)
|
|
printf(" ");
|
|
}
|
|
|
|
for (; j < 16; j++)
|
|
printf(" ");
|
|
printf(" ");
|
|
|
|
for (j = 0; j < c; j++) {
|
|
int ch = data[i + j] & 0xff;
|
|
printf("%c", ' ' <= ch && ch <= '~' ? ch : ' ');
|
|
}
|
|
|
|
printf("\n");
|
|
|
|
if (c < 16)
|
|
break;
|
|
}
|
|
}
|
|
|
|
void
|
|
msk_dump_mbuf(struct mbuf *m)
|
|
{
|
|
int count = m->m_pkthdr.len;
|
|
|
|
printf("m=%p, m->m_pkthdr.len=%d\n", m, m->m_pkthdr.len);
|
|
|
|
while (count > 0 && m) {
|
|
printf("m=%p, m->m_data=%p, m->m_len=%d\n",
|
|
m, m->m_data, m->m_len);
|
|
msk_dump_bytes(mtod(m, char *), m->m_len);
|
|
|
|
count -= m->m_len;
|
|
m = m->m_next;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
msk_sysctl_handler(SYSCTLFN_ARGS)
|
|
{
|
|
int error, t;
|
|
struct sysctlnode node;
|
|
struct sk_softc *sc;
|
|
|
|
node = *rnode;
|
|
sc = node.sysctl_data;
|
|
t = sc->sk_int_mod;
|
|
node.sysctl_data = &t;
|
|
error = sysctl_lookup(SYSCTLFN_CALL(&node));
|
|
if (error || newp == NULL)
|
|
return error;
|
|
|
|
if (t < SK_IM_MIN || t > SK_IM_MAX)
|
|
return EINVAL;
|
|
|
|
/* update the softc with sysctl-changed value, and mark
|
|
for hardware update */
|
|
sc->sk_int_mod = t;
|
|
sc->sk_int_mod_pending = 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set up sysctl(3) MIB, hw.sk.* - Individual controllers will be
|
|
* set up in skc_attach()
|
|
*/
|
|
SYSCTL_SETUP(sysctl_msk, "sysctl msk subtree setup")
|
|
{
|
|
int rc;
|
|
const struct sysctlnode *node;
|
|
|
|
if ((rc = sysctl_createv(clog, 0, NULL, NULL,
|
|
0, CTLTYPE_NODE, "hw", NULL,
|
|
NULL, 0, NULL, 0, CTL_HW, CTL_EOL)) != 0) {
|
|
goto err;
|
|
}
|
|
|
|
if ((rc = sysctl_createv(clog, 0, NULL, &node,
|
|
0, CTLTYPE_NODE, "msk",
|
|
SYSCTL_DESCR("msk interface controls"),
|
|
NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL)) != 0) {
|
|
goto err;
|
|
}
|
|
|
|
msk_root_num = node->sysctl_num;
|
|
return;
|
|
|
|
err:
|
|
aprint_error("%s: syctl_createv failed (rc = %d)\n", __func__, rc);
|
|
}
|