NetBSD/sys/arch/pmax/dev/ims332.c
mhitch 704caddf5f Fix several errors when setting a color map entry for the maxine display.
1. Start at the specified entry instead of entry 0.
2. Use the blue value instead of the green when setting the blue color entry.
3. Don't use the starting index again for storing the saved entry - the cmap
   pointer was previously initialized using the starting index.  This fixes
   a hard hang on the maxine when console output is done after calls to
   set the color map (usually by the X server).
1996-09-02 17:35:52 +00:00

397 lines
9.9 KiB
C

/* $NetBSD: ims332.c,v 1.3 1996/09/02 17:35:52 mhitch Exp $ */
/*-
* Copyright (c) 1992, 1993, 1995
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)ims332.c 8.1 (Berkeley) 6/10/93
*/
/*
* Routines for the Inmos IMS-G332 Colour video controller
* Author: Alessandro Forin, Carnegie Mellon University
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <machine/fbio.h>
#include <machine/fbvar.h>
#include <machine/machConst.h>
#include <pmax/dev/ims332.h>
static u_int ims332_read_register (struct fbinfo *, int);
static void ims332_write_register (struct fbinfo *, int, unsigned int);
#define assert_ims332_reset_bit(r) *r &= ~0x40
#define deassert_ims332_reset_bit(r) *r |= 0x40
int
ims332init(fi)
struct fbinfo *fi;
{
int i;
/*
* Initialize the screen. (xcfb-specific)
*/
#ifdef notdef
register u_int *reset = (u_int *)fi -> fi_base;
assert_ims332_reset_bit(reset);
DELAY(1); /* specs sez 50ns.. */
deassert_ims332_reset_bit(reset);
/* CLOCKIN appears to receive a 6.25 Mhz clock --> PLL 12 for
75Mhz monitor */
ims332_write_register (fi, IMS332_REG_BOOT,
12 | IMS332_BOOT_CLOCK_PLL);
/* initialize VTG */
ims332_write_register (fi, IMS332_REG_CSR_A,
IMS332_BPP_8 | IMS332_CSR_A_DISABLE_CURSOR);
DELAY(50); /* spec does not say */
/* datapath registers (values taken from prom's settings) */
ims332_write_register (fi, IMS332_REG_HALF_SYNCH, 0x10);
ims332_write_register (fi, IMS332_REG_BACK_PORCH, 0x21);
ims332_write_register (fi, IMS332_REG_DISPLAY, 0x100);
ims332_write_register (fi, IMS332_REG_SHORT_DIS, 0x5d);
ims332_write_register (fi, IMS332_REG_BROAD_PULSE, 0x9f);
ims332_write_register (fi, IMS332_REG_V_SYNC, 0xc);
ims332_write_register (fi, IMS332_REG_V_PRE_EQUALIZE, 2);
ims332_write_register (fi, IMS332_REG_V_POST_EQUALIZE, 2);
ims332_write_register (fi, IMS332_REG_V_BLANK, 0x2a);
ims332_write_register (fi, IMS332_REG_V_DISPLAY, 0x600);
ims332_write_register (fi, IMS332_REG_LINE_TIME, 0x146);
ims332_write_register (fi, IMS332_REG_LINE_START, 0x10);
ims332_write_register (fi, IMS332_REG_MEM_INIT, 0xa);
ims332_write_register (fi, IMS332_REG_XFER_DELAY, 0xa);
ims332_write_register (fi, IMS332_REG_COLOR_MASK, 0xffffff);
#endif /* notdef */
/* Zero out the cursor RAM... */
for (i = 0; i < 512; i++)
ims332_write_register (fi, IMS332_REG_CURSOR_RAM + i, 0);
/* Set up the color map... */
ims332InitColorMap (fi);
/* Enable display... */
ims332_write_register (fi, IMS332_REG_CSR_A,
IMS332_BPP_8
| IMS332_CSR_A_DMA_DISABLE
| IMS332_CSR_A_VTG_ENABLE);
return (1);
}
static u_char cursor_RGB[6]; /* cursor color 2 & 3 */
static u_int
ims332_read_register(fi, regno)
struct fbinfo *fi;
int regno;
{
register u_char *regs = (u_char *)fi -> fi_vdac;
unsigned char *rptr;
register u_int val, v1;
/* spec sez: */
rptr = regs + 0x80000 + (regno << 4);
val = *((volatile u_short *) rptr );
v1 = *((volatile u_short *) regs );
return (val & 0xffff) | ((v1 & 0xff00) << 8);
}
static void
ims332_write_register(fi, regno, val)
struct fbinfo *fi;
int regno;
register unsigned int val;
{
register u_char *regs = (u_char *)fi -> fi_vdac;
u_char *wptr;
/* spec sez: */
wptr = regs + 0xa0000 + (regno << 4);
*((volatile u_int *)(regs)) = (val >> 8) & 0xff00;
*((volatile u_short *)(wptr)) = val;
}
void
ims332InitColorMap(fi)
struct fbinfo *fi;
{
u_char *cmap;
int i;
cmap = (u_char *)(fi -> fi_cmap_bits);
ims332_write_register (fi, IMS332_REG_LUT_BASE, 0);
cmap [0] = cmap [1] = cmap [2] = 0;
for (i = 1; i < 256; i++) {
ims332_write_register (fi, IMS332_REG_LUT_BASE + i, 0xffffff);
cmap [i * 3] = cmap [i * 3 + 1] = cmap [i * 3 + 2] = 0xff;
}
for (i = 0; i < 3; i++) {
cursor_RGB[i] = 0x00;
cursor_RGB[i + 3] = 0xff;
}
ims332RestoreCursorColor (fi);
}
/* Load color map entry(s). */
int
ims332LoadColorMap(fi, bits, index, count)
struct fbinfo *fi;
caddr_t bits;
int index, count;
{
u_char *cmap_bits;
u_char *cmap;
int i;
if (index > 256 || index < 0 || index + count > 256)
return EINVAL;
cmap_bits = (u_char *)bits;
cmap = (u_char *)(fi -> fi_cmap_bits) + index * 3;
for (i = 0; i < count; i++) {
ims332_write_register (fi,
IMS332_REG_LUT_BASE + i + index,
(cmap_bits [i * 3 + 2] << 16) |
(cmap_bits [i * 3 + 1] << 8) |
(cmap_bits [i * 3]));
cmap [i * 3] = cmap_bits [i * 3];
cmap [i * 3 + 1] = cmap_bits [i * 3 + 1];
cmap [i * 3 + 2] = cmap_bits [i * 3 + 2];
}
return 0;
}
/* Get color map entry(s). */
int
ims332GetColorMap(fi, bits, index, count)
struct fbinfo *fi;
caddr_t bits;
int index, count;
{
u_char *cmap_bits;
u_char *cmap;
if (index > 256 || index < 0 || index + count > 256)
return EINVAL;
cmap_bits = (u_char *)bits;
cmap = (u_char *)(fi -> fi_cmap_bits) + index * 3;
bcopy (cmap, cmap_bits, count * 3);
return 0;
}
/*
* Video on/off
*
* It is unfortunate that X11 goes backward with white@0
* and black@1. So we must stash away the zero-th entry
* and fix it while screen is off.
*/
int
ims332_video_off(fi)
struct fbinfo *fi;
{
u_int csr;
u_char *cmap_bits;
if (fi -> fi_blanked)
return 0;
cmap_bits = (u_char *)fi -> fi_cmap_bits;
ims332_write_register (fi, IMS332_REG_LUT_BASE, 0);
ims332_write_register (fi, IMS332_REG_COLOR_MASK, 0);
/* cursor now */
csr = ims332_read_register (fi, IMS332_REG_CSR_A);
csr |= IMS332_CSR_A_DISABLE_CURSOR;
ims332_write_register (fi, IMS332_REG_CSR_A, csr);
fi -> fi_blanked = 1;
return 0;
}
int
ims332_video_on (fi)
struct fbinfo *fi;
{
u_char *cmap;
u_int csr;
if (!fi -> fi_blanked)
return 0;
cmap = (u_char *)(fi -> fi_cmap_bits);
ims332_write_register (fi, IMS332_REG_LUT_BASE,
((unsigned)cmap [0] |
((unsigned)cmap [1] << 8) |
((unsigned)cmap [2] << 16)));
ims332_write_register (fi, IMS332_REG_COLOR_MASK, 0xffffffff);
/* cursor now */
csr = ims332_read_register (fi, IMS332_REG_CSR_A);
csr &= ~IMS332_CSR_A_DISABLE_CURSOR;
ims332_write_register (fi, IMS332_REG_CSR_A, csr);
fi -> fi_blanked = 0;
return 0;
}
/*
* Cursor
*/
void
ims332PosCursor(fi, x, y)
struct fbinfo *fi;
int x, y;
{
if (y < 0)
y = 0;
else if (y > fi -> fi_type.fb_width - fi -> fi_cursor.width - 1)
y = fi -> fi_type.fb_width - fi -> fi_cursor.width - 1;
if (x < 0)
x = 0;
else if (x > fi -> fi_type.fb_height - fi -> fi_cursor.height - 1)
x = fi -> fi_type.fb_height - fi -> fi_cursor.height - 1;
fi -> fi_cursor.x = x;
fi -> fi_cursor.y = y;
ims332_write_register (fi, IMS332_REG_CURSOR_LOC,
((x & 0xfff) << 12) | (y & 0xfff));
}
void
ims332RestoreCursorColor (fi)
struct fbinfo *fi;
{
/* Bg is color[0], Fg is color[1] */
ims332_write_register (fi, IMS332_REG_CURSOR_LUT_0,
(cursor_RGB[2] << 16) |
(cursor_RGB[1] << 8) |
(cursor_RGB[0]));
ims332_write_register (fi, IMS332_REG_CURSOR_LUT_1, 0x7f0000);
ims332_write_register (fi, IMS332_REG_CURSOR_LUT_2,
(cursor_RGB[5] << 16) |
(cursor_RGB[4] << 8) |
(cursor_RGB[3]));
}
/* Set the color of the cursor. */
void
ims332CursorColor (fi, color)
struct fbinfo *fi;
unsigned int color[];
{
register int i;
for (i = 0; i < 6; i++)
cursor_RGB[i] = (u_char)(color[i] >> 8);
ims332RestoreCursorColor(fi);
}
void
ims332LoadCursor(fi, cursor)
struct fbinfo *fi;
u_short *cursor;
{
register int i, j, k, pos;
register u_short ap, bp, out;
/*
* Fill in the cursor sprite using the A and B planes, as provided
* for the pmax.
* XXX This will have to change when the X server knows that this
* is not a pmax display.
*/
pos = 0;
for (k = 0; k < 16; k++) {
ap = *cursor;
bp = *(cursor + 16);
j = 0;
while (j < 2) {
out = 0;
for (i = 0; i < 8; i++) {
out = ((out >> 2) & 0x3fff) |
((ap & 0x1) << 15) |
((bp & 0x1) << 14);
ap >>= 1;
bp >>= 1;
}
ims332_write_register (fi, IMS332_REG_CURSOR_RAM + pos,
out);
pos++;
j++;
}
while (j < 8) {
ims332_write_register (fi, IMS332_REG_CURSOR_RAM + pos,
0);
pos++;
j++;
}
cursor++;
}
while (pos < 512) {
ims332_write_register (fi, IMS332_REG_CURSOR_RAM + pos, 0);
pos++;
}
}