NetBSD/sys/dev/pci/if_ntwoc_pcireg.h

101 lines
3.9 KiB
C

/* $Id: if_ntwoc_pcireg.h,v 1.1 1998/07/26 03:28:28 explorer Exp $ */
/*
* Copyright (c) 1998 Vixie Enterprises
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Vixie Enterprises nor the names
* of its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY VIXIE ENTERPRISES AND
* CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL VIXIE ENTERPRISES OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This software has been written for Vixie Enterprises by Michael Graff
* <explorer@flame.org>. To learn more about Vixie Enterprises, see
* ``http://www.vix.com''.
*/
#ifndef _IF_NTWOC_PCIREG_H_
#define _IF_NTWOC_PCIREG_H_
/*
* ASIC register offsets
*/
/*
* This register is in the SCA namespace, but is NOT really an SCA register.
* It contains information about the daughter cards, and provides a method
* to configure them.
*/
#define NTWOC_FECR 0x200
/*
* definition of the NTWO_FECR register
*/
#define NTWOC_FECR_ID0 0x0e00 /* mask of daughter card on port 0 */
#define NTWOC_FECR_ID0_SHIFT 9
#define NTWOC_FECR_ID1 0xe000 /* mask of daughter card on port 1 */
#define NTWOC_FECR_ID1_SHIFT 13
#define NTWOC_FECR_DTR1 0x0080 /* DTR output for port 1 */
#define NTWOC_FECR_DTR0 0x0040 /* DTR output for port 0 */
#define NTWOC_FECR_DSR1 0x1000 /* DSR input for port 1 */
#define NTWOC_FECR_DSR0 0x0100 /* DSR input for port 0 */
#define NTWOC_FECR_TE1 0x0008 /* tristate enable port 1 */
#define NTWOC_FECR_TE0 0x0004 /* tristate enable port 0 */
#define NTWOC_FECR_ETC1 0x0002 /* output clock port 1 */
#define NTWOC_FECR_ETC0 0x0001 /* output clock port 0 */
/*
* Daughter card for port.
*/
#define NTWOC_FE_ID_V35 0x00
#define NTWOC_FE_ID_X01 0x01 /* unused? */
#define NTWOC_FE_ID_TEST 0x02
#define NTWOC_FE_ID_X03 0x03 /* unused? */
#define NTWOC_FE_ID_RS232 0x04
#define NTWOC_FE_ID_X05 0x05 /* was hssi, now unused? */
#define NTWOC_FE_ID_RS422 0x06
#define NTWOC_FE_ID_NONE 0x07 /* empty, no card present */
/*
* ASIC Control defininitions
*/
/* Front End (Modem,etc) Control Register */
#define ASIC_MODEM 0x200 /* ASIC modem control register Offset */
/* ASIC front end control register bits */
#define ASIC_DSR1 0x1000 /* DSR signal input port 1 */
#define ASIC_DSR0 0x100 /* DSR signal input port 0 */
#define ASIC_DTR1 0x80 /* DTR signal output port 1 */
#define ASIC_DTR0 0x40 /* DTR signal output port 0 */
#define ASIC_TE1 0x8 /* RS422 TX,enable port 1 */
#define ASIC_TE0 0x4 /* RS422 TX,enable port 0 */
#define ASIC_ETC1 0x2 /* ETC Clock out port 1 */
#define ASIC_ETC0 0x1 /* ETC Clock out port 0 */
#endif /* _IF_NTWOC_PCIREG_H_ */