NetBSD/sys/arch/sun3/include/mon.h

333 lines
9.5 KiB
C

/*
* This file derived from kernel/mach/sun3.md/machMon.h from the
* sprite distribution.
*
* In particular, this file came out of the Walnut Creek cdrom collection
* which contained no warnings about any possible copyright infringement
* It was also indentical to a file in the sprite kernel tar file found on
* allspice.berkeley.edu.
* It also written in the annoying sprite coding style. I've made
* efforts not to heavily edit their file, just ifdef parts out. -- glass
*/
#ifndef MON_H
#define MON_H
/*
* machMon.h --
*
* Structures, constants and defines for access to the sun monitor.
* These are translated from the sun monitor header file "sunromvec.h".
*
* NOTE: The file keyboard.h in the monitor directory has all sorts of useful
* keyboard stuff defined. I haven't attempted to translate that file
* because I don't need it. If anyone wants to use it, be my guest.
*
* Copyright (C) 1985 Regents of the University of California
* All rights reserved.
*
*
* Header: /cdrom/src/kernel/Cvsroot/kernel/mach/sun3.md/machMon.h,v 9.1 90/10/03 13:52:34 mgbaker Exp SPRITE (Berkeley)
*/
#ifndef _MACHMON
#define _MACHMON
/*
* The memory addresses for the PROM, and the EEPROM.
* On the sun2 these addresses are actually 0x00EF??00
* but only the bottom 24 bits are looked at so these still
* work ok.
*/
#define PROM_BASE 0x0fef0000
/*
* The table entry that describes a device. It exists in the PROM; a
* pointer to it is passed in MachMonBootParam. It can be used to locate
* PROM subroutines for opening, reading, and writing the device.
*
* When using this interface, only one device can be open at once.
*
* NOTE: I am not sure what arguments boot, open, close, and strategy take.
* What is here is just translated verbatim from the sun monitor code. We
* should figure this out eventually if we need it.
*/
typedef struct {
char devName[2]; /* The name of the device */
int (*probe)(); /* probe() --> -1 or found controller
number */
int (*boot)(); /* boot(bp) --> -1 or start address */
int (*open)(); /* open(iobp) --> -1 or 0 */
int (*close)(); /* close(iobp) --> -1 or 0 */
int (*strategy)(); /* strategy(iobp,rw) --> -1 or 0 */
char *desc; /* Printable string describing dev */
} MachMonBootTable;
/*
* Structure set up by the boot command to pass arguments to the program that
* is booted.
*/
typedef struct {
char *argPtr[8]; /* String arguments */
char strings[100]; /* String table for string arguments */
char devName[2]; /* Device name */
int ctlrNum; /* Controller number */
int unitNum; /* Unit number */
int partNum; /* Partition/file number */
char *fileName; /* File name, points into strings */
MachMonBootTable *bootTable; /* Points to table entry for device */
} MachMonBootParam;
/*
* Here is the structure of the vector table which is at the front of the boot
* rom. The functions defined in here are explained below.
*
* NOTE: This struct has references to the structures keybuf and globram which
* I have not translated. If anyone needs to use these they should
* translate these structs into Sprite format.
*/
typedef struct {
char *initSp; /* Initial system stack ptr
* for hardware */
int (*startMon)(); /* Initial PC for hardware */
int *diagberr; /* Bus err handler for diags */
/*
* Monitor and hardware revision and identification
*/
MachMonBootParam **bootParam; /* Info for bootstrapped pgm */
unsigned *memorySize; /* Usable memory in bytes */
/*
* Single-character input and output
*/
unsigned char (*getChar)(); /* Get char from input source */
int (*putChar)(); /* Put char to output sink */
int (*mayGet)(); /* Maybe get char, or -1 */
int (*mayPut)(); /* Maybe put char, or -1 */
unsigned char *echo; /* Should getchar echo? */
unsigned char *inSource; /* Input source selector */
unsigned char *outSink; /* Output sink selector */
/*
* Keyboard input (scanned by monitor nmi routine)
*/
int (*getKey)(); /* Get next key if one exists */
int (*initGetKey)(); /* Initialize get key */
unsigned int *translation; /* Kbd translation selector
(see keyboard.h in sun
monitor code) */
unsigned char *keyBid; /* Keyboard ID byte */
int *screen_x; /* V2: Screen x pos (R/O) */
int *screen_y; /* V2: Screen y pos (R/O) */
struct keybuf *keyBuf; /* Up/down keycode buffer */
/*
* Monitor revision level.
*/
char *monId;
/*
* Frame buffer output and terminal emulation
*/
int (*fbWriteChar)(); /* Write a character to FB */
int *fbAddr; /* Address of frame buffer */
char **font; /* Font table for FB */
int (*fbWriteStr)(); /* Quickly write string to FB */
/*
* Reboot interface routine -- resets and reboots system. No return.
*/
int (*reBoot)(); /* e.g. reBoot("xy()vmunix") */
/*
* Line input and parsing
*/
unsigned char *lineBuf; /* The line input buffer */
unsigned char **linePtr; /* Cur pointer into linebuf */
int *lineSize; /* length of line in linebuf */
int (*getLine)(); /* Get line from user */
unsigned char (*getNextChar)(); /* Get next char from linebuf */
unsigned char (*peekNextChar)(); /* Peek at next char */
int *fbThere; /* =1 if frame buffer there */
int (*getNum)(); /* Grab hex num from line */
/*
* Print formatted output to current output sink
*/
int (*printf)(); /* Similar to "Kernel printf" */
int (*printHex)(); /* Format N digits in hex */
/*
* Led stuff
*/
unsigned char *leds; /* RAM copy of LED register */
int (*setLeds)(); /* Sets LED's and RAM copy */
/*
* Non-maskable interrupt (nmi) information
*/
int (*nmiAddr)(); /* Addr for level 7 vector */
int (*abortEntry)(); /* Entry for keyboard abort */
int *nmiClock; /* Counts up in msec */
/*
* Frame buffer type: see <sun/fbio.h>
*/
int *fbType;
/*
* Assorted other things
*/
unsigned romvecVersion; /* Version # of Romvec */
struct globram *globRam; /* monitor global variables */
caddr_t kbdZscc; /* Addr of keyboard in use */
int *keyrInit; /* ms before kbd repeat */
unsigned char *keyrTick; /* ms between repetitions */
unsigned *memoryAvail; /* V1: Main mem usable size */
long *resetAddr; /* where to jump on a reset */
long *resetMap; /* pgmap entry for resetaddr */
/* Really struct pgmapent * */
int (*exitToMon)(); /* Exit from user program */
unsigned char **memorybitmap; /* V1: &{0 or &bits} */
void (*setcxsegmap)(); /* Set seg in any context */
void (**vector_cmd)(); /* V2: Handler for 'v' cmd */
int dummy1z;
int dummy2z;
int dummy3z;
int dummy4z;
} MachMonRomVector;
/*
* Functions defined in the vector:
*
*
* getChar -- Return the next character from the input source
*
* unsigned char getChar()
*
* putChar -- Write the given character to the output source.
*
* void putChar(ch)
* char ch;
*
* mayGet -- Maybe get a character from the current input source. Return -1
* if don't return a character.
*
* int mayGet()
*
* mayPut -- Maybe put a character to the current output source. Return -1
* if no character output.
*
* int mayPut(ch)
* char ch;
*
* getKey -- Returns a key code (if up/down codes being returned),
* a byte of ASCII (if that's requested),
* NOKEY (if no key has been hit).
*
* int getKey()
*
* initGetKey -- Initialize things for get key.
*
* void initGetKey()
*
* fbWriteChar -- Write a character to the frame buffer
*
* void fwritechar(ch)
* unsigned char ch;
*
* fbWriteStr -- Write a string to the frame buffer.
*
* void fwritestr(addr,len)
* register unsigned char *addr; / * String to be written * /
* register short len; / * Length of string * /
*
* getLine -- read the next input line into a global buffer
*
* getline(echop)
* int echop; / * 1 if should echo input, 0 if not * /
*
* getNextChar -- return the next character from the global line buffer.
*
* unsigned char getNextChar()
*
* peekNextChar -- look at the next character in the global line buffer.
*
* unsigned char peekNextChar()
*
* getNum -- Grab hex num from the global line buffer.
*
* int getNum()
*
* printf -- Scaled down version of C library printf. Only %d, %x, %s, and %c
* are recognized.
*
* printhex -- prints rightmost <digs> hex digits of <val>
*
* printhex(val,digs)
* register int val;
* register int digs;
*
* abortEntry -- Entry for keyboard abort.
*
* abortEntry()
*/
/*
* Where the rom vector is defined.
*/
#define romVectorPtr ((MachMonRomVector *) PROM_BASE)
#if 0
/*
* Functions and defines to access the monitor.
*/
#define Mach_MonPrintf (romVectorPtr->printf)
extern void Mach_MonPutChar _ARGS_((int ch));
extern int Mach_MonMayPut _ARGS_((int ch));
extern void Mach_MonAbort _ARGS_((void));
extern void Mach_MonReboot _ARGS_((char *rebootString));
extern void Mach_MonStartNmi _ARGS_((void));
extern void Mach_MonStopNmi _ARGS_((void));
extern void Mach_MonTrap _ARGS_((Address address_to_trap_to));
/*
* These routines no longer work correctly with new virtual memory.
*/
#define Mach_MonGetChar (romVectorPtr->getChar)
#define Mach_MonGetLine (romVectorPtr->getLine)
#define Mach_MonGetNextChar (romVectorPtr->getNextChar)
#define Mach_MonPeekNextChar (romVectorPtr->peekNextChar)
#endif
#define mon_printf (romVectorPtr->printf)
#define mon_putchar (romVectorPtr->printf)
#define mon_exit_to_mon (romVectorPtr->exitToMon)
#define mon_reboot (romVectorPtr->exitToMon)
#define romp (romVectorPtr)
#endif /* _MACHMON */
#endif /* MON_H */